aboutsummaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2020-07-05include/cpu/x86/lapic: Add support for x86_64Patrick Rudolph
Fix integer with different size to pointer conversion. Change-Id: I9c13892b2d79be12cc6bf7bc0a5e3a39b64032a1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42984 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-04smbios: TYPE_NONE and TYPE_OTHER are already takenPatrick Georgi
Change-Id: Ic66f7c919a71cb53773d5056e5f756cd6faf4909 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43135 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-04post_code: reorganize order of postcode definesSindhoor Tilak
Currently, the certain postcode values aren't in increasing order of values. The change, just reorganzies the defines in increasing order of the values Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net> Change-Id: Id5f0ddc4593f689829ab9a7fdeebd5f66939bf79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-07-04arch/x86/smbios: Add SMBIOS type8 dataBryantOu
Refer to section 7.9 Port Connector Information of DSP0134_3.3.0 to add type 8 data, the table of data should be ported according to platform design and MB silkscreen. Change-Id: I81e25d27c9c6717750edf1d547e5f4cfb8f1da14 Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-02acpi_device: Replace polarity with active_low in acpi_gpio for GpioIoFurquan Shaikh
As per ACPI spec, GpioIo does not have any polarity associated with it. Linux kernel uses `active_low` argument within GPIO _DSD property to allow BIOS to indicate if the corresponding GPIO should be treated as active low. Thus, if GPIO has active high polarity or if it does not have any polarity associated with it, then the `active_low` argument is supposed to be set to 0. Having a `polarity` field in acpi_gpio seems confusing because GPIOs might not always have polarity associated with them. Example, in case of DMIC-select GPIO where 0 means select DMIC0 and 1 means select DMIC1, there is no polarity associated with the GPIO. Thus, it would be clearer for mainboard to use macros without having to specify a particular polarity. In order to enable mainboards to provide GPIO information without polarity for GpioIo usage, this change also adds `ACPI_GPIO_OUTPUT` and `ACPI_GPIO_INPUT` macros. BUG=b:157603026 Change-Id: I39d2a6ac8f149a74afeb915812fece86c9b9ad93 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-02acpi_device: Add helper macros for setting acpi_gpio fieldsFurquan Shaikh
This change adds helper macros for initializing acpi_gpio fields for GpioIo/GpioInt objects. This allows dropping some redundant code for each macro to set the structure fields. Change-Id: Id0a655468759ed3035c6c1e8770e37f1275e344e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01ACPI GNVS: Replace uses of smm_get_gnvs()Kyösti Mälkki
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25arch/x86/smbios: Add more fields to be overriden for type 3 and 4Johnny Lin
For type 3, override chassis asset_tag_number with smbios_mainboard_asset_tag() and add two functions that can override chassis version and serial_number. For type 4 add smbios_processor_serial_number() to override serial_number. Tested on OCP Tioga Pass. Change-Id: I80c6244580a4428fab781d760071c51c7933abee Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-06-24ACPI: Replace smm_setup_structures()Kyösti Mälkki
Except for whitespace and varying casts the codes were the same when implemented. Platforms that did not implement this are tagged with ACPI_NO_SMI_GNVS. Change-Id: I31ec85ebce03d0d472403806969f863e4ca03b6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-24ACPI: Add framework for GNVS initialisationKyösti Mälkki
Provide common initialisation point for setting up GNVS structure before first SMI is triggered. Change-Id: Iccad533c3824d70f6cbae52cc8dd79f142ece944 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42423 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22device/smbus_host: Declare common early SMBus prototypesKyösti Mälkki
Change-Id: I1157cf391178a27db437d1d08ef5cb9333e976d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-22cpu/x86/lapic: Support x86_64 and clean up codePatrick Rudolph
Most LAPIC registers are 32bit, and thus the use of long is valid on x86_32, however it doesn't work on x86_64. * Don't use long as it is 64bit on x86_64, which breaks interrupts in QEMU and thus SeaBIOS wouldn't time out the boot menu * Get rid of unused defines * Get rid of unused atomic xchg code Tested on QEMU Q35 with x86_64 enabled: Interrupts work again. Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working. Tested on Lenovo T410 with x86_64 enabled. Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22soc/amd/picasso/bootblock: Write EIP to secure S3Raul E Rangel
This change is required so we have a defined entry point on S3. Without this, the S3_RESUME_EIP_MSR register could in theory be written to later which would be a security risk. BUG=b:147042464 TEST=Resume trembyle and see bootblock start. coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 smm starting (log level: 8)... SMI# #6 SMI#: SLP = 0x0c01 Chrome EC: Set SMI mask to 0x0000000000000000 Chrome EC: Set SCI mask to 0x0000000000000000 Clearing pending EC events. Error code EC_RES_UNAVAILABLE(9) is expected. EC returned error result code 9 SMI#: Entering S3 (Suspend-To-RAM) PSP: Prepare to enter sleep state 3... OK SMU: Put system into S3/S4/S5 Timestamp - start of bootblock: 18446744070740509170 coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 bootblock starting (log level: 8)... Family_Model: 00810f81 PMxC0 STATUS: 0x200800 SleepReset BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) Timestamp - end of bootblock: 18446744070804450274 VBOOT: Loading verstage. FMAP: area COREBOOT found @ c75000 (3715072 bytes) CBFS: Locating 'fallback/verstage' CBFS: Found @ offset 61b80 size cee4 PROG_RUN: Setting MTRR to cache stage. base: 0x04000000, size: 0x00010000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4b0b0d0d576fc42b1628a4547a5c9a10bcbe9d37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-06-22cpu/x86/smm: Define APM_CNT_ROUTE_ALL_XHCIKyösti Mälkki
Change-Id: I0bc321f499278e0cdbfb40be9a2b2ae21828d2f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-22cpu/x86/smm: Define APM_CNT_NOOP_SMIKyösti Mälkki
Old (!PARALLEL_MP) cpu bringup uses this as the first control to do SMM relocation. Change-Id: I4241120b00fac77f0491d37f05ba17763db1254e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18ACPI: Clean up some S3 related leftoversKyösti Mälkki
With RELOCATABLE_RAMSTAGE the backing up of low memory on S3 resume path was dropped. We forgot some things behind. Change-Id: I674f23dade0095e64619af0ae81e23368b1ee471 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-17treewide: Replace CONFIG(ARCH_xx) testsKyösti Mälkki
Once we support building stages for different architectures, such CONFIG(ARCH_xx) tests do not evaluate correctly anymore. Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17device/pnp_ops.h: Use pnp.h functionsAngel Pons
With BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3ca080e700cf7b7f5b76cadddc7e41960413433c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42133 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17cpu/x86/smm: Add helper functions to verify SMM accessPatrick Rudolph
* Add a function to check if a region overlaps with SMM. * Add a function to check if a pointer points to SMM. * Document functions in Documentation/security/smm To be used to verify data accesses in SMM. Change-Id: Ia525d2bc685377f50ecf3bdcf337a4c885488213 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41084 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16cpu/x86: Define MTRR_CAP_PRMRRKyösti Mälkki
Followups will remove remaining cases of PRMRR_SUPPORTED and SMRR_SUPPORTED in the tree. Change-Id: I7f8c7d98f5e83a45cc0787c245cdcaf8fab176d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16sb,soc/intel: Replace smm_southbridge_enable_smi()Kyösti Mälkki
Change-Id: I8a2e8b0c104d9e08f07aeb6a2c32106480ace3e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16soc/intel/common: Replace smm_soutbridge_enable(SMI_FLAGS)Kyösti Mälkki
Change-Id: I8c4dc5ab91891de9737189bd7ae86df18d86f758 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16arch/x86: Declare global_smi_enable()Kyösti Mälkki
The call made at mp_ops.post_mp_init() generally uses four different names. Unify these with followups. smm_southbridge_enable(SMI_EVENTS) smm_southbridge_enable_smi() hudson_enable_smi_generation() enable_smi_generation() Furthermore, some platforms do not enable power button SMI early. It may be preferred to delay the enablement, but fow now provide global_smi_enable_no_pwrbtn() too. Change-Id: I6a28883ff9c563289b0e8199cd2ceb9acd6bacda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-16arch/x86: Create helper for APM_CNT SMI triggersKyösti Mälkki
Attempts to write to APM_CNT IO port should always be guarded with a test to verify SMI handler has been installed. Immediate followup removes redundant HAVE_SMI_HANDLER tests. Change-Id: If3fb0f1a8b32076f1d9f3fea9f817dd4b093ad98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41971 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15include: update cbmem_possibly_online for vboot_before_bootblockMartin Roth
cbmem is not online when vboot runs before the bootblock. Update the macro to reflect that. BUG=b:158124527 TEST=Build & boot psp_verstage on trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I6fb4ad04f276f2358ab9d4d210fdc7a34a93a5bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/42066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-15include/rules.h: Add vboot_before_bootblock to ENV_ROMSTAGE_OR_BEFOREMartin Roth
BUG=b:158124527 TEST=Build & boot Trembyle with PSP verstage Change-Id: I3f5cc4d396c678f1020409cbdcb5127b2e0e6d89 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42379 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15arch/x86: Remove XIP_ROM_SIZEKyösti Mälkki
When adding XIP stages on x86, the -P parameter was used to pass a page size that covers the entire file to add. The same can now be achieved with --pow2page and we no longer need to define a static Konfig for the purpose. TEST: Build asus/p2b and lenovo/x60 with "--pow2page -v -v" and inspect the generated make.log files. The effective pagesize is reduced from 64kB to 16kB for asus/p2b giving more freedom for the stage placement inside CBFS. Pagesize remained at 64kB for lenovo/x60. Change-Id: I5891fa2c2bb2d44077f745619162b143d083a6d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-14drivers/intel/fsp2_0: Add FSP 2.2 specific supportSubrata Banik
• Based on FSP EAS v2.1 – Backward compatibility is retained. • Add multi-phase silicon initialization to increase the modularity of the FspSiliconInit() API. • Add FspMultiPhaseSiInit() API • FSP_INFO_HEADER changes o Added FspMultiPhaseSiInitEntryOffset • Add FSPS_ARCH_UPD o Added EnableMultiPhaseSiliconInit, bootloaders designed for FSP 2.0/2.1 can disable the FspMultiPhaseSiInit() API and continue to use FspSiliconInit() without change. FSP 2.2 Specification: https://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html Change-Id: If7177a267f3a9b4cbb60a639f1c737b9a3341913 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41728 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10device/xhci: Add xHCI utility to enumerate capabilitiesRaul E Rangel
This will allow enumerating an xHCI controller to allow dynamically generating the ACPI device nodes. BUG=b:154756391 TEST=Boot trembyle and see capabilities printed on console xHCI Supported Protocol: Major: 0x2, Minor: 0x0, Protocol: 'USB ' Port Offset: 1, Port Count: 2 xHCI Supported Protocol: Major: 0x3, Minor: 0x10, Protocol: 'USB ' Port Offset: 3, Port Count: 1 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3065c3fffad01b5378a55cfe904f971079b13d0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/41899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-10amd/00730F01: Clean the Microcode updatingZheng Bao
According to the comments of https://review.coreboot.org/c/coreboot/+/41719 , which is about Microcode patch for amd/picasso. Change the code with the same way. The changes include: 1. combine the microcode_xxx.c and update_microcode.c into one source. 2. Redefine the microcode updating function to eliminate the parameter. Get the revision ID in the black box. Reduce the depth of function calls. 3. Get the revision ID by bitwise calculation instead of lookup table. 4. Reduce the confusing type casts. 5. Squash some lines. We do not change the way it used to be. The code assume only one microcode is integrated in CBFS. If needed in future, 41719 is the example of integrating multiple binaries. And, 41719 depends on the definition in this patch. Change-Id: I8b0da99db0d3189058f75e199f05492c4e6c5881 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-10amd/common: Add the macro definition for patch level MSRZheng Bao
This MSR is used for detecting if the micro code is applied successfully. Change-Id: I060eb1a31f3358341ac0d5b9105e710c351f2ce8 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42212 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09pci_ops.h: Turn and/or ops into update wrappersAngel Pons
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I2d3779967f357dd380928869c630a1996fdd60ec Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-09include/device/pci_ops.h: Add bitwise AND opsAngel Pons
For the sake of completeness, we should provide these operations. Change-Id: Ia28af94ec86319c7380d8377f7e24e5cdf55dd9c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42145 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-08spi: Remove non_volatile flag from block protection interfaceDaniel Gröber
Only Winbond parts seem to support making status register writes volatile. So this flag should not be exposed in the generic interface. Change-Id: Idadb65ffaff0dd7809b18c53086a466122b37c12 Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41746 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-08device: Add a disabling PCIe device bus master functionJohn Zhao
A function pci_dev_disable_bus_master() is created. This function can be used to disable Thunderbolt PCIe root ports, bridges and devices for Vt-d based security platform at end of boot service. BUG=None TEST=Verified PCIe device bus master enable bit is cleared. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie92a15bf2c66fdc311098acb81019d4fb7f68313 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-07acpi: Rename motherboard_fill_fadt() to mainboard_fill_fadt()Kyösti Mälkki
The prefix mainboard_ was used everywhere else. Change-Id: Ie576fd47301aa484cb1396e0c6f7260b7698af4d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-07acpi,soc/intel: Make soc/motherboard_fill_fadt() globalKyösti Mälkki
Change-Id: Iad7e7af802212d5445aed8bb08a55fd6c044d5bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41916 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06drivers/pc80/rtc: Drop ARCH_X86 guard in headerKyösti Mälkki
Change-Id: I03c25ad5d9864406e1a021e39a5736ac72c8825a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38197 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06arch/x86: Declare permanent_smi_handler()Kyösti Mälkki
Advertising SMI triggers in FADT is only valid if we exit with SMI installed. There has been some experiments to delay SMM installation to OS, yet there are new platforms that allow some configuration access only to be done inside SMM. Splitting static HAVE_SMI_HANDLER variable helps to manage cases where SMM might be both installed and cleared prior to entering payload. Change-Id: Iad92c4a180524e15199633693446a087787ad3a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-04acpi: Add support for writing UART device descriptorsDuncan Laurie
This change adds support for generating the device descriptor that corresponds to the UARTSerialBusV2() ACPI macro. The resulting ACPI code for ACPI_UART_RAW_DEVICE(115200, 64) is: UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.PCI0.UAR2", 0x00, ResourceConsumer, , Exclusive) Change-Id: I671ce2a499d74717d8677528c46ab3fbc1d7faf5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-04acpi: Accomodate non-standard UUIDs in device propertiesDuncan Laurie
There have been changes to the way device properties are supported in Linux[1] and Windows[2] which add flexibilty: - non-standard UUIDs can be used instead of only ACPI_DP_UUID - support for multiple different packages within the _DSD that associate different properties with unique UUIDs. To handle this I extracted the part that does the write of UUID and properties to a separate function and defined a new PACKAGE type which has the custom UUID as a name and can be used the same way that child properties are today. For example a PCIe root port for a USB4 port has a standard property indicating the USB4 reference, and then two custom properties which are defined for different attributes. Example code: /* Create property table */ acpi_dp *dsd = acpi_dp_new_table("_DSD"); acpi_dp_add_reference(dsd, "usb4-port", usb4_path); /* Add package for hotplug */ acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"); acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1); acpi_dp_add_package(dsd, pkg); /* Add package for external port info */ pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389"); acpi_dp_add_integer(pkg, "ExternalFacingPort", 1); acpi_dp_add_package(dsd, pkg); /* Write all properties */ acpi_dp_write(dsd); Resulting ACPI: Scope (\_SB.PCI0.TRP0) { Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA } }, ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () { "HotPlugSupportInD3", One } }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () { "ExternalFacingPort", One }, } }) } [1] https://patchwork.kernel.org/patch/10599675/ [2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03acpi: Drop typoed __ROMC__Kyösti Mälkki
Change-Id: I4fcec5bbc038a31565882631052ab07e38946e65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-06-03acpigen: Add some new helper functionsDuncan Laurie
These build on existing functions but use different object types in order to provide functions for upcoming changes: acpigen_write_return_op(): Return an operator. acpigen_write_if_lequal_op_op(): Check if 2 operands are equal. acpigen_get_package_op_element(): Read an element from a package into an operator. This one just provides the missing helper, the other 3 already exist: acpigen_get_tx_gpio: Read TX gpio state. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I1141fd132d6f09cf482f74e95308947cba2c5846 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41985 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02amd/microcode: Change equivalant ID width to 16bitZheng Bao
The definition of processor_rev_id in struct microcode is 16 bits. So we need to change the a series of parameters passing to 16 bits. Change-Id: Iacabee7e571bd37f3aca106d515d755969daf8f3 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-02fw_config: Add firmware configuration interfaceDuncan Laurie
This change introduces a new top-level interface for interacting with a bitmask providing firmware configuration information. This is motivated by Chromebook mainboards that need to support multiple different configurations at runtime with the same BIOS. In these devices the Embedded Controller provides a bitmask that can be broken down into different fields and each field can then be broken down into different options. The firmware configuration value could also be stored in CBFS and this interface will look in CBFS first to allow the Embedded Controller value to be overridden. The firmware configuration interface is intended to easily integrate into devicetree.cb and lead to less code duplication for new mainboards that make use of this feature. BUG=b:147462631 TEST=this provides a new interface that is tested in subsequent commits Change-Id: I1e889c235a81545e2ec0e3a34dfa750ac828a330 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02cpu/x86/mtrr: add x86_setup_mtrrs_with_detect_no_above_4gb()Aaron Durbin
There's not a function that is the equivalent to x86_setup_mtrrs_with_detect() but not solving for above 4GiB. Provide x86_setup_mtrrs_with_detect_no_above_4gb() which is the equivalent to x86_setup_mtrrs_with_detect() but instructs the MTRR solver to not take into account memory above 4GiB. BUG=b:155426691 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia1b5d67d6f139aaa929e03ddbc394d57dfb949e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41897 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02cpu/x86/mtrr: add helper for setting multiple MTRRsAaron Durbin
Introduce concept of var_mtrr_context object for tracking and assigning MTRR values. The algorithm is lifted from postcar_loader code, but it's generalized for different type of users: setting MSRs explicitly or deferring to a particular caller's desired actions. BUG=b:155426691,b:155322763 Change-Id: Ic03b4b617196f04071093bbba4cf28d23fa482d8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02src: Remove redundant includesElyes HAOUAS
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>, <stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes each time when <types.h> is included. Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-02cpu/x86/mtrr.h: Get rid of commonlib/helpers.h dependencyNico Huber
We want to use the CACHE_ROM_* macros in linker scripts. Avoid `commonlib/helpers.h` as it contains an ALIGN() macro definition that conflicts with the ALIGN keyword in linker scripts. Change-Id: I3bf20733418ca4135f364a3f6489e74d45e4f466 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02acpi: Add definitions for device sleep statesDuncan Laurie
The ACPI device sleep states are different from system sleep states and many places hardcode to specific values that are difficult to decode without referring to the spec. Change-Id: If5e732725b775742fd2a9fd0df697e312aa7bf20 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41791 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28acpi: Add new file for implementing Type-C Connector classTim Wawrzynczak
The USB Type-C Connector Class in the Linux kernel is not specific to the ChromeOS EC, so this functionality is now split out into a separate file, acpigen_usb.c. Documentation about the kernel side is available at https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html. Change-Id: Ife5b8b517b261e7c0068c862ea65039c20382c5a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41539 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28include/uuid.h: Add missing includeRaul E Rangel
uuid.h uses uint8_t which is provided by stdint.h. BUG=b:153675915 TEST=Fixed my compiler error. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idbec40f444d9df7587b9066faac65499415dae6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-28lib: Add strtok() and strtok_r()harshit
Add strtok() and strtok_r() to the library. Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Change-Id: Ic855b31669be1c274cbf247c53ffa6f74ec5bf35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-05-28device: Enable resource allocation above 4G boundary with allocator v4Furquan Shaikh
This change adds back CB:39487 which was reverted as part of CB:41412. Now that the resource allocator is split into old(v3) and new(v4), this change adds support for allocating resources above 4G boundary with the new allocator v4. Original commit message: This change adds support for allocating resources above the 4G boundary by making use of memranges for resource windows enabled in the previous CL. It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the following ways: a) Downstream device resources can set this flag to indicate that they would like to have their resource allocation above the 4G boundary. These semantics will have to be enabled in the drivers managing the devices. It can also be extended to be enabled via devicetree. This flag is automatically propagated by the resource allocator from downstream devices to the upstream bridges in pass 1. It is done to ensure that the resource allocator has a global view of downstream requirements during pass 2 at domain level. b) Bridges have a single resource window for each of mem and prefmem resource types. Thus, if any downstream resource of the bridge requests allocation above 4G boundary, all the other downstream resources of the same type under the bridge will be allocated above 4G boundary. c) During pass 2, resource allocator at domain level splits IORESOURCE_MEM into two different memory ranges -- one for the window below 4G and other above 4G. Resource allocation happens separately for each of these windows. d) At the bridge level, there is no extra logic required since the resource will live entirely above or below the 4G boundary. Hence, all downstream devices of any bridge will fall within the window allocated to the bridge resource. To handle this case separately from that of domain, initializing of memranges for a bridge is done differently than the domain. Limitation: Resources of a given type at the bridge or downstream devices cannot live both above and below 4G boundary. Thus, if a bridge has some downstream resources requesting allocation for a given type above 4G boundary and other resources of the same type requesting allocation below 4G boundary, then all these resources of the same type get allocated above 4G boundary. Change-Id: I92a5cf7cd1457f2f713e1ffd8ea31796ce3d0cce Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-28Remove new additions of "this file is part of" linesElyes HAOUAS
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-26device: Move resource allocation into a separate compilation unitFurquan Shaikh
This change moves the resource allocator functions out of device.c and into two separate files: 1. resource_allocator_v3.c: This is the old implementation of resource allocator that uses a single window for resource allocation. It is required to support some AMD chipsets that do not provide an accurate map of allocated resources by the time the allocator runs. They work fine with the old allocator since it restricts itself to allocations in a single window at the top of the 4G space. 2. resource_allocator_common.c: This file contains the functions that can be shared by the old and new resource allocator. Entry point into the resource allocation is allocate_resources() which can be implemented by both old and new allocators. This change also adds a Kconfig option RESOURCE_ALLOCATOR_V3 which enables the old resource allocator. This config option is enabled by default currently, but in the following CLs this will be enabled only for the broken boards. Reason for this split: Both the old and new resource allocators need to be retained in the tree until the broken chipsets are fixed. Change-Id: I2f5440cf83c6e9e15a5f22e79cc3c66aa2cec4c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41442 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTIONKyösti Mälkki
After removal of CAR_MIGRATION there are no more reasons to carry around ENV_STAGE_HAS_BSS_SECTION=n case. Replace 'MAYBE_STATIC_BSS' with 'static' and remove explicit zero-initializers. Change-Id: I14dd9f52da5b06f0116bd97496cf794e5e71bc37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-22drivers/soundwire/alc5682: Support Realtek ALC5682 SoundWire deviceDuncan Laurie
The ALC5682 headset codec can be connected over SoundWire and be configured for mainboards to use: - Data Port 0 and Bulk Register Access is supported - Data Ports 1-4 are supported as both source and sink The data port and audio mode properties are filled out as best as possible with the datasheet as a reference. The ACPI address for the codec is calculated with the information in the codec driver combined with the devicetree.cb hierarchy where the link and unique IDs are extracted from the device path. For example this device is connected to master link ID 0 and has strap settings configuring it for unique ID 1: chip drivers/soundwire/alc5682 register "desc" = ""Headset Codec"" device generic 0.1 on end end This driver was tested with the volteer reference design by booting and disassembling the runtime SSDT to ensure that the devices have the expected address and properties. Device (SW01) { Name (_ADR, 0x000021025D568200) Name (_DDN, "Headset Codec") Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-sw-interface-revision", 0x00010000 }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }, Package () { "mipi-sdw-dp-0-subproperties", "DP0" }, Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }, Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" }, Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }, [...] } } Name (BRA0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-bra-mode-bus-frequency-configs", Package () { 0x000F4240, [...] } }, [...] } } Name (DP0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-bra-flow-controlled", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-bra-mode-0", "BRA0" } } } Name (MOD0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-audio-mode-bus-frequency-configs", Package () { 0x000F4240, [...] } }, [...] } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } } BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22drivers/soundwire/max98373: Support MAX98373 SoundWire deviceDuncan Laurie
The MAX98373 smart speaker amp can be connected over SoundWire and be configured for mainboards to use: - Data Port 0 and Bulk Register Access is not supported - Data Port 1 is the 32bit data input for the speaker path - Data Port 3 is the 16bit data output for I/V sense ADC path The data port and audio mode properties are filled out as best as possible with the datasheet as a reference. The ACPI address for the codec is calculated with the information in the codec driver combined with the devicetree.cb hierarchy where the link and unique IDs are extracted from the device path. For example this device is connected to master link ID 1 and has strap settings configuring it for unique ID 3. chip drivers/soundwire/max98373 register "desc" = ""Left Speaker Amp"" device generic 1.3 on end end This driver was tested with the volteer reference design by booting and disassembling the runtime SSDT to ensure that the devices have the expected address and properties. Device (SW13) { Name (_ADR, 0x000123019F837300) Name (_DDN, "Left Speaker Amp") Method (_STA) { Return (0x0F) } Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-sw-interface-revision", 0x00010000 }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }, Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }, Package () { "mipi-sdw-dp-3-source-subproperties", "SRC3" }, } } Name (MOD0, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-audio-mode-bus-frequency-configs", Package () { 0x00753000, [...] } }, [...] } } Name (SNK1, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } Name (SRC3, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mipi-sdw-data-port-type", Zero }, [...] }, ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), Package () { Package () { "mipi-sdw-port-audio-mode-0", "MOD0" } } } } BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3f8cb2779ddde98c5df739bd8a1e83a12a305c00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-21acpi/device: Add a helper function to write SoundWire _ADRDuncan Laurie
This change adds a help function to write a SoundWire ACPI address object that conforms to the SoundWire DisCo Specification Version 1.0 The SoundWire address structure is defined in include/device/soundwire.h and provides the properties that are used to form the _ADR object. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I6efbf52ce20b53f96d69efe2bf004b98dbe06552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40885 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21acpi/soundwire: Add functions to generate SoundWire propertiesDuncan Laurie
This change uses the previously added SoundWire definitions to provide functions that generate ACPI Device Properties for SoundWire controllers and codecs. A SoundWire controller driver should populate `struct soundwire_controller` and pass it to soundwire_gen_controller(). This will add all of the defined master links provided by the controller. A SoundWire codec driver should populate the necessary members in struct soundwire_codec and pass it to soundwire_gen_codec(). Several properties are optional and depend on whether the codec itself supports certain features and behaviors. The goal of this interface is to handle all of the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0 so that controller and codec drivers do not need to all have code for writing standard properties. Both of these functions also provide a callback method for adding custom properties that are not defined by the SoundWire DisCo Specification. These properties may be required by OS drivers but are outside of the scope of the SoundWire specification itself. This code is tested with controller, codec, and mainboard implementations in subsequent commits. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ib185eaacf3c4914087497ed65479a772c155502b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-19device: Add definitions for SoundWire specificationDuncan Laurie
This header implements structures to describe the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0. By itself this just provides the property definitions, it is then used by the code that generates ACPI device properties and by the controller and codec drivers. A new header for MIPI vendor/device IDs is also added, with the MIPI Alliance board members added by default. This will be used in the same way as pci_ids.h to track devices added to coreboot. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ie9901d26d1efe68edad7c049c98a976c4e4f06f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-16Revert "device: Enable resource allocation above 4G boundary"Furquan Shaikh
This reverts commit 44ae0eacb82259243bf844a3fe5ad24a7821e997. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: I90f3eac2d23b5f59ab356ae48ed94d14c7405774 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41412 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13lib/spd_cache: add spd_cache common codeJamie Chen
This patch adds some spd_cache functions. They are for implementing the spd_cache. It's for reducing the SPD fetch time when device uses SODIMMs. The MRC cache also includes SPD data, but there is no public header file available to decode the struct of MRC. So SPD cache is another solution. BUG=b:146457985 BRANCH=None TEST=Build puff successfully and verified below two items. one DIMM save the boot time : 158ms two DIMM save the boot time : 265ms Change-Id: Ia48aa022fabf8949960a50597185c9d821399522 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-13lib/spd_bin: add get_spd_sn functionJamie Chen
This patch adds the get_spd_sn function. It's for reading SODIMM serial number. In spd_cache implementation it can use to get serial number before reading whole SPD by smbus. BUG=b:146457985 BRANCH=None TEST=Wrote sample code to get the serial number and ran on puff. It can get the serial number correctly. Change-Id: I406bba7cc56debbd9851d430f069e4fb96ec937c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40414 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13Remove new additions of "this file is part of" linesFurquan Shaikh
CB:41194 got rid of "this file is part of" lines. However, there are some changes that landed right around the same time including those lines. This change uses the following command to drop the lines from new files: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12util/sconfig: Add LPC and ESPI busesRaul E Rangel
Picasso has an LPC and eSPI bridge on the same PCI DEVFN. They can both be active at the same time. This adds a way to specify which devices belong on which bus. i.e., device pci 14.3 on # - D14F3 bridge device espi 0 on chip ec/google/chromeec device pnp 0c09.0 on end end end device lpc 0 on end end BUG=b:154445472 TEST=Built trembyle and saw static.c contained the espi bus. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0c2f40813c05680f72e5f30cbb13617e8f994841 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12southbridge/intel/common: Add Process CallChristian Walter
Add functionality to use process call cycle. It can be used to write/read data to/from e.g. EEPROM attached to SMBus Controller via I2C. Tested on: * C246 Change-Id: Ifdac6cf70a4ce744601f5d152a83d2125ea88360 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39875 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12device/pci_device: Extract pci_domain_set_resources from SOCRaul E Rangel
pci_domain_set_resources is duplicated in all the SOCs. This change promotes the duplicated function. Picasso was adding it again in the northbridge patch. I decided to promote the function instead of duplicating it. BUG=b:147042464 TEST=Build and boot trembyle. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12espi: Add support for debug helper to print slave capabilitiesFurquan Shaikh
This change adds a Kconfig option to enable eSPI debugging that pulls in a helper function to print slave capabilities. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I8ff250fe85dfa9370bf93ce3c7e2de5c069bf9e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12espi: Add some helper functions for espi capability checkFurquan Shaikh
This change adds helper functions that can be used to check support for different slave capabilities. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic66b06f9efcafd0eda4c6029fa67489de76bbed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-12espi: Add definitions for eSPI VW index messsagesFurquan Shaikh
This change adds eSPI VW index message definitions as per per Enhanced Serial Peripheral Interface Base Specification (document # 327432-004 Revision 1.0) Chapter 5 "Transaction Layer". BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I5c04d4de222e16d3b8e2a5fb2fc4107ea278a35b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41252 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12espi: Add definitions for eSPI slave registersFurquan Shaikh
This change adds eSPI slave register definitions as per Enhanced Serial Peripheral Interface Base Specification (document # 327432-004 Revision 1.0) Chapter 7 "Slave Registers". BUG=b:153675913 Change-Id: Icee53817476b7d50ff26e64bbc2c3f5afb19a7cd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12device: Enable resource allocation above 4G boundaryFurquan Shaikh
This change adds support for allocating resources above the 4G boundary by making use of memranges for resource windows enabled in the previous CL. It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the following ways: a) Downstream device resources can set this flag to indicate that they would like to have their resource allocation above the 4G boundary. These semantics will have to be enabled in the drivers managing the devices. It can also be extended to be enabled via devicetree. This flag is automatically propagated by the resource allocator from downstream devices to the upstream bridges in pass 1. It is done to ensure that the resource allocator has a global view of downstream requirements during pass 2 at domain level. b) Bridges have a single resource window for each of mem and prefmem resource types. Thus, if any downstream resource of the bridge requests allocation above 4G boundary, all the other downstream resources of the same type under the bridge will be allocated above 4G boundary. c) During pass 2, resource allocator at domain level splits IORESOURCE_MEM into two different memory ranges -- one for the window below 4G and other above 4G. Resource allocation happens separately for each of these windows. d) At the bridge level, there is no extra logic required since the resource will live entirely above or below the 4G boundary. Hence, all downstream devices of any bridge will fall within the window allocated to the bridge resource. To handle this case separately from that of domain, initializing of memranges for a bridge is done differently than the domain. Limitation: Resources of a given type at the bridge or downstream devices cannot live both above and below 4G boundary. Thus, if a bridge has some downstream resources requesting allocation for a given type above 4G boundary and other resources of the same type requesting allocation below 4G boundary, then all these resources of the same type get allocated above 4G boundary. BUG=b:149186922 TEST=Verified that resources get allocated above the 4G boundary correctly on volteer. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7fb2a75cc280a307300d29ddabaebfc49175548f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08memrange: Update comment to indicate limit is inclusive for memranges_next_entryFurquan Shaikh
This change updates the comment for memranges_next_entry() to indicate that the limit provided by the caller is inclusive. Change-Id: Id40263efcb9417ed31c130996e56c30dbbc82e02 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-07memrange: constify memranges_is_empty()Aaron Durbin
memranges_is_empty() doesn't need to manipulate the object. Mark the parameter as const. Change-Id: I89f4ec404c144eac8d2900945a1ccaf5cc4f88bb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41102 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: move copyrights and authors to AUTHORSPatrick Georgi
Also split "this is part of" line from copyright notices. Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06elog: Add new elog types for CSME-initiated host resetderek.huang
Change-Id: Iddae1c7cbc71ce10b126a1e05abf9269e8187a38 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40687 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Update sata files to be more aligned with rest of acpi filesFurquan Shaikh
This change moves sata.h to include/acpi/acpi_sata.h to align with the rest of the acpi header files in include/acpi. BUG=b:155428745 Change-Id: I3f97e5c12535a331d7347c0ecad00b07b5f13f37 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Make header #ifdefs consistentFurquan Shaikh
Now that all ACPI header files are moved to src/include/acpi, this change updates the #ifdef to __ACPI_${FILENAME}__. BUG=b:155428745 Change-Id: Id24ee35bac318278871a26f98be7092604de01c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (2/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 2/5 which moves the contents of arch/x86/include/arch/acpi*.h files into include/acpi/acpi*.h and updates the arch header files to include acpi header files. These are just temporary placeholders and will be removed later in the series. BUG=b:155428745 Change-Id: I9acb787770b7f09fd2cbd99cb8d0a6499b9c64b3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02cpu: Add a helper function cpu_get_lapic_addrFurquan Shaikh
This change adds a helper function cpu_get_lapic_addr() that returns LOCAL_APIC_ADDR for x86. It also adds a weak default implementation which returns 0 if platform does not support LAPIC. This is being done in preparation to move all ACPI table support in coreboot out of arch/x86. BUG=b:155428745 Change-Id: I4d9c50ee46804164712aaa22be1b434f800871ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-01include/device/device.h: Include <smbios.h>Elyes HAOUAS
smbios_slot_{type,data_width,length,designation} used for smbios_type_9 needs "smbios.h" Also use already defined 'smbios_type11' in "smbios.h". This will also include <smbios.h> in "static.c" file, this we can remove indirect includes of <smbios.h> in "chip.h" Change-Id: Id412a504da2fd75648636febd150356569e07935 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40310 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29device/pci_id: Add Tiger Lake TCSS device IDJohn Zhao
Add Tiger Lake TCSS USB xHCI, xDCI and Thunderbolt DMA device ID. BUG=None TEST=Built and booted image sucessfully. Change-Id: Idef3850666c9f393181e0a13974b9ad79ba258ad Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-04-29arch/x86: Implement RESET_VECTOR_IN_RAMFelix Held
Add support for devices with the reset vector pointing into DRAM. This is a specific implementation that assumes a paradigm of AMD Family 17h (a.k.a. "Zen"). Until the first ljmpl for protected mode, the core's state appears to software like other designs, and then the actual physical addressing becomes recognizable. These systems cannot implement cache-as-RAM as in more traditional x86 products. Therefore instead of reusing CAR names and variables, a substitute called "earlyram" is introduced. This change makes adjustments to CAR-aware files accordingly. Enable NO_XIP_EARLY_STAGES. The first stage is already in DRAM, and running subsequent stages as XIP in the boot device would reduce performance. Finally, add a new early_ram.ld linker file. Because all stages run in DRAM, they can be linked with their .data and .bss as normal, i.e. they don't need to rely on storage available only at a fixed location like CAR systems. The primary purpose of the early_ram.ld is to provide consistent locations for PRERAM_CBMEM_CONSOLE, TIMESTAMP regions, etc. across stages until cbmem is brought online. BUG=b:147042464 TEST=Build for trembyle, and boot to ramstage. $ objdump -h cbfs/fallback/bootblock.debug Idx ,Name ,Size ,VMA ,LMA ,File off Algn 0 ,.text ,000074d0 ,08076000 ,08076000 ,00001000 2**12 1 ,.data ,00000038 ,0807d4d0 ,0807d4d0 ,000084d0 2**2 2 ,.bss ,00000048 ,0807d508 ,0807d508 ,00008508 2**2 3 ,.stack ,00000800 ,0807daf0 ,0807daf0 ,00000000 2**0 4 ,.persistent ,00001cfa ,0807e2f0 ,0807e2f0 ,00000000 2**0 5 ,.reset ,00000010 ,0807fff0 ,0807fff0 ,0000aff0 2**0 6 ,.debug_info ,0002659c ,00000000 ,00000000 ,0000b000 2**0 7 ,.debug_abbrev ,000074a2 ,00000000 ,00000000 ,0003159c 2**0 8 ,.debug_aranges,00000dd0 ,00000000 ,00000000 ,00038a40 2**3 9 ,.debug_line ,0000ad65 ,00000000 ,00000000 ,00039810 2**0 10 ,.debug_str ,00009655 ,00000000 ,00000000 ,00044575 2**0 11 ,.debug_loc ,0000b7ce ,00000000 ,00000000 ,0004dbca 2**0 12 ,.debug_ranges ,000029c0 ,00000000 ,00000000 ,00059398 2**3 Change-Id: I9c084ff6fdcf7e9154436f038705e8679daea780 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29src/cpu/x86/mtrr/earlymtrr: Add clear_all_var_mtrrRaul E Rangel
Picasso does not define the state of variable MTRRs on boot. Add a helper function to clear all MTRRs. BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I21b887ce12849a95ddd8f1698028fb6bbfb4a7f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40764 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28device: Constify struct device * parameter to acpi_inject_dsdtFurquan Shaikh
.acpi_inject_dsdt() does not need to modify the device structure. Hence, this change makes the struct device * parameter to acpi_inject_dsdt as const. Change-Id: I3b096d9a5a9d649193e32ea686d5de9f78124997 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40711 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28device: Constify struct device * parameter to acpi_fill_ssdt()Furquan Shaikh
.acpi_fill_ssdt() does not need to modify the device structure. This change makes the struct device * parameter to acpi_fill_ssdt() as const. Change-Id: I110f4c67c3b6671c9ac0a82e02609902a8ee5d5c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40710 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28device: Constify struct device * parameter to dev_nameFurquan Shaikh
dev_name() does not need to modify the device structure. Hence, this change makes the struct device * parameter to dev_name() as const. Change-Id: I6a94394385e45fd76f68218bf57914bddd2e2121 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40703 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28device: Constify struct device * parameter to write_acpi_tablesFurquan Shaikh
.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28amd/family17h: Add PCI device IDs for all controllers in AMD Family17hFurquan Shaikh
This change adds all the missing PCI device IDs for AMD Family 17h. IDs that were already present are updated to include _FAM17H_ in the name instead of _PCO_ and _DALI_. This ensures that the PCI IDs match the family and models as per the PPR. In cases where the controller is present only on certain models, _MODEL##H_ is also included in the name. BUG=b:153858769 BRANCH=None TEST=Verified that trembyle and dalboz still build. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia767d32ec22f5e58827e7531c0d3d3bac90d3425 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28soc/amd: Update macro name for IOMMU on AMD Family 17hFurquan Shaikh
IOMMU for AMD Family 17h Model 10-20h uses the same PCI device ID 0x15D1. This change updates the name to indicate that the PCI device ID is supported for FP5(Model 18h) and FT5(Model 20h). BUG=b:153858769 BRANCH=None TEST=Trembyle and dalboz still build. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I17c782000ed525075a3e438ed820a22d9af61a26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28soc/intel/jasperlake: Add new MCH device idsMaulik V Vaghela
Add new MCH device-ids for jasperlake. Reference is taken from jasperlake EDS volume 1 chapter 13.3. BUG=None BRANCH=None TEST=code compiles and able to boot the platform. Change-Id: I38e09579c9a3681e9168c66085cbb3a092dc30cc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-04-28security/lockdown: Write-protect WP_ROPatrick Rudolph
Allow to write protect only the WP_RO region in case of enabled VBOOT. One can either lock the boot device in VERSTAGE early if VBOOT is enabled, or late in RAMSTAGE. Both options have their downsides as explained below. Lock early if you don't trust the code that's stored in the writeable flash partition. This prevents write-protecting the MRC cache, which is written in ramstage. In case the contents of the MRC cache are corrupted this can lead to system instability or trigger unwanted code flows inside the firmware. Lock late if you trust the code that's stored in the writeable flash partition. This allows write-protecting the MRC cache, but if a vulnerability is found in the code of the writeable partition an attacker might be able to overwrite the whole flash as it hasn't been locked yet. Change-Id: I72c3e1a0720514b9b85b0433944ab5fb7109b2a2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-04-28security: Add common boot media write protectionPatrick Rudolph
Introduce boot media protection settings and use the existing boot_device_wp_region() function to apply settings on all platforms that supports it yet. Also remove the Intel southbridge code, which is now obsolete. Every platform locks the SPIBAR in a different stage. For align up with the common mrc cache driver and lock after it has been written to. Tested on Supermicro X11SSH-TF. The whole address space is write-protected. Change-Id: Iceb3ecf0bde5cec562bc62d1d5c79da35305d183 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 04:27:08 +0000