| Age | Commit message (Collapse) | Author |
|---|
|
This patch provides helper functions to read or write a register via the
MDIO bus. They can be used from drivers to easily access registers on
the MDIO bus.
Change-Id: I293d93435d27269a071b4b9b94a1b55307c575a7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch extends the available device paths with a new device 'mdio'.
MDIO is the 'Management Data Input/Output' called interface which is
used to access an Ethernet PHY behind a MAC to change settings. The real
payload data path is not handled by this interface.
To address the PHY correctly on the MDIO bus, there is a 5 bit address
needed, which often can be configured via pins on the mainboard.
Therefore, the new introduced device has an 'addr' field to define its
address. If one wants to use a MDIO device in devicetree, the syntax is
straight forward (example):
device mdio 0x2 on end
As the MDIO interface is driven by the MAC, most likely this MDIO device
will be hooked in as a child device of the (PCI attached) MAC device.
With the new introduced ops_mdio a new interface is added to provide an
API for read and write access over MDIO.
Change-Id: I6691f92c4233bc30afc9029840b06f74bb1eb4b2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69382
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie6def0dab9ac37c0938b73d27148a49531c6b17f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69802
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7af61404d11f7e0ff5f30c42958c4dd9318538fa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Add Meteor Lake MCH device ID 0x7d15.
TEST=Build and verify boot on MTL RVP
With patch, coreboot log:
`[DEBUG] MCH: device id 7d15 (rev 00) is Meteorlake P`
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If46b01910239173cd74bf6eebc69a81291b6e15a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6d8efe783e6cc5413c3fd0583574a075a2c3876b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Idca56583c1c8dc41ad11d915ec3e8be781fb4e48
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add new IGD device.
Reference: EDS Vol 1 (640228)
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com>
Change-Id: Iad69f547a981390ef3749256e9fd9bcfc106fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These were dropped with LEGACY_SMP_INIT.
Change-Id: Iecaf9ba3d31d22311557b885b31e98a0edd74d96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add definitions for Link Capability and Slot Capability and these
definitions may be used in smbios type 9.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Id66710d5569a7247d998cab20c2e41f2e67712cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This makes it easier to get the content of an msr into a full 64bit
variable.
Change-Id: I1b026cd3807fd68d805051a74b3d31fcde1c5626
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68572
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Read I/O APIC ID and vector counts from hardware.
Change-Id: Ia173582eaad305000f958c5d207e9efaa06d8750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add definition for smbios type 4 and type 9
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I559995b0204f8e5bdeef2c0f8b394f9011d72240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The deadlock prevention is also needed with CONFIG_X2APIC_RUNTIME when
the cpu is in x2apic mode.
TESTED: Fixes SMI generation on xeon_sp hardware with
CONFIG_X2APIC_RUNTIME.
Change-Id: I6a71204fcff35e11613fc8363ce061b348e73496
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This commit factors out `struct xhci_usb_info` from intel specific code
as it will be useful on other platforms.
BUG=b:186792595
TEST=Builds for volteer
Change-Id: I5b4cc6268f072c6948f11c7498a564d7a5c0a190
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This commit factors out some code for XHCI port status values.
BUG=b:186792595
TEST=Built coreboot for volteer device
Change-Id: I045405ed224aa8f48f6f628b7d49ec6bafb450d7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These symbols and codepaths are unused now so drop them.
Change-Id: I7c46c36390f116f8f8920c06e539075e60c7118c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69361
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces support signing and verification of firmware
slots using CBFS metadata hash verification method for faster initial
verification. To have complete verification, CBFS_VERIFICATION should
also be enabled, as metadata hash covers only files metadata, not their
contents.
This patch also adapts mainboards and SoCs to new vboot reset
requirements.
TEST=Google Volteer/Voxel boots with VBOOT_CBFS_INTEGRATION enabled
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I40ae01c477c4e4f7a1c90e4026a8a868ae64b5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66909
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Able to build and boot Google, Rex SKU2 (Micron LPDDR5x
MT62F1G32D2DS-026).
Without this code change:
[INFO ] SPD: module type is UNKNOWN
With this code change:
[INFO ] SPD: module type is LPDDR5X
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If620cf51133ca295fd3f1cbecbb472beb337b9fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69226
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By convention 'fill_lb_xxx' is used.
Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of having callbacks into serial console code to set up the
coreboot table have the coreboot table code call IP specific code to get
serial information. This makes it easier to reuse the information as the
return value can be used in a different context (e.g. when filling in a
FDT).
This also removes boilerplate code to set up lb_console entries by
setting entry based on the type in struct lb_uart.
Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
* Add DPC related definitions which are defined in 7.9.14 of PCIe
6.0 spec.
* Add AER related definitions which are defined in 7.8.4 of PCIe
6.0 spec.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifb6722c326ef69ef1bf3b1c2c1d5bc0cb29d7c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69106
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
This pragma says to IWYU (Include What You Use) that the current file
is supposed to provide commented headers.
Change-Id: I482c645f6b5f955e532ad94def1b2f74f15ca908
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Ic157cd820be204035706f8074dd6dbcb95c0f04f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
It will be used in a follow-up change.
Change-Id: If89f9569c33949995d3b45a5f871ff2cb84a6610
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add clr/setbits*p macros as pendant to read/write*p.
Change-Id: I5b10ccab97c3a372051050b28ada854baec91d18
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68790
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Acpigen inline helper functions are causing problems while compiling
coreboot with function instrumentation. Sometimes functions are not
inlined and are causing linking errors. Forcing inlining fixes problems
like that, as these functions would normally be inlined anyway.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ibf747573940fe5e76199f327f4e5bc32b4f8c470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Add system agent ID for RPL QDF# Q271
TEST=Tested by ODM and "MCH: device id a71b (rev 01) is Unknown" msg is
gone
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Change-Id: I6fd51d9915aa59d012c73abc2477531643655e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add a post-code call that SoCs can hook to output or save in any way
that is specific to that SoC.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0369e4362840d7506d301105d8e1e2fd865919f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add HBM3 according to SMBIOS 3.6.0:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
Change-Id: Id8473e8c4b5006b53b5ff9de7825d15595f2a616
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65356
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To allow testing of code that uses msr calls, separate the actual
calls into a separate header file, This allows the tests to emulate
the msr access without replacing the rest of the msr.h definitions.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I102709fec346f18040baf9f2ce6e6d7eb094682d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit 672bd9bee5c0045694ef20fe3e2f7a003bef0edd.
Reason for revert: Gmeet resolution dropped. When system starts
Gmeet video call, it uses the hardware accelerated encoder as per
the expectation. But, as soon as another system connects to the call,
the immediate fallback observed from hardware to software encoder.
Due to this, Gmeet resolution dropped from 720p to 180p.
Currently, this issue observed on AlderLake-N SoC based fanless
platforms. This issue is not seen on fan based systems.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alderlake-N systems. With this revert
Gmeet resolution drop not observed.
Change-Id: Idaeaeaed47be44166a7cba9a0a1fac50d2688e50
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Some platform run early stages like romstage and verstage from CAR
instead of XIP. This allows to link them like other arch inside the
_program region. This make in place LZ4 decompression possible as it
needs a bit of extra place to extract the code which is now provided by
the .bss.
Tested on up/squared (Intel APL).
Change-Id: I6cf51f943dde5f642d75ba4c5d3be520dc56370a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch drops unused ADL-N UFS PCI Device ID macro
`PCI_DID_INTEL_ADP_UFS`.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I24e4a1a871763473df4d610b13e8a3a754470233
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Based on DMTF SMBIOS Specification 3.5.0
Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com>
Change-Id: I710124ca88dac9edb68aab98cf5950aa16c695d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67926
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
add functions to check whether a device is enabled pci
device or a pci device on a specific bus number.
TEST: compile and qemu run successfully
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I3257c8404017372f6cdd9f6cf9453502447343a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68101
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Core i5-10210U can have the following IGD Device IDs
0x9B21/0x9B41/0x9BAC/0x9BCA/0x9BCC according to Intel ARK. Some of
these IDs were not present in coreboot source nor hooked to the
common graphics driver. Add the missing IDs so that the graphics
driver will probe on the mentioned processor and detect the
framebuffer.
TEST=Boot Protectli VP4650 with i5-10210U and see framebuffer is
detected when using FSP GOP and libgfxinit.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iee720a272367aead31c8c8fa712bade1b6e53948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67975
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on DMTF SMBIOS Specification 3.1.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia2db29f8bc4cfbc6648bb2cabad074d9ea583ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add function defs and prototypes of functions checking whether
a device is {a cpu,an enabled cpu}
TEST: compile test and qemu executed successfully with
coreinfo payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: Iabc0e59d604ae4572921518a8dad47dc3d149f81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ib2c1738b7b6a6db1fa57ea34fb50588388140a51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia0c4fd6d20c92caea379ef02e020ab9294ed0ffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of defining NUM_FIXED_MTRRS in both cpu/x86/mp_init.h and
cpu/x86/mtrr/mtrr.c in two different ways that will evaluate to the same
value, define it once in include/cpu/x86/mtrr.h which is included in
both C files.
TEST=Timeless build for amd/mandolin results in identical firmware image
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71cec61e22f5ce76baef21344c7427be29f193f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch adds a new smbus console driver and Kconfig
options to enable the driver.
Change-Id: Ife77fb2c3e1cc77678a4972701317d50624ceb95
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67339
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Q0 stepping has a different ID than P1.
Reference: CML EDS Volume 1 (Intel doc #606599)
Change-Id: Id1da42aa93ab3440ae743d943a00713b7df3f453
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit 510a55d4eeaeb32047c17328ef238b55b89e7296.
Reason for revert: Observed `missing read resource` issue for
cnvi device
BUG=b:244687646
TEST=No error seen in AP log while booting Google/rex
Without this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[ERROR] GENERIC: 0.0 missing read_resources
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
With this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e881313729f1088cffa7c161722ee79bb9acc49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67566
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save
state without ever entering SMM (e.g. at the default 0x30000 address).
This has been a feature in all AMD CPUs since at least AMD K8. This
allows to do relocation in parallel in ramstage and without setting up a
relocation handler, which likely results in a speedup. The more cores
the higher the speedup as relocation was happening sequentially. On a 4
core AMD picasso system this results in 33ms boot speedup.
TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM
is correctly relocated with the BSP correctly entering the smihandler.
Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Refer to PCI Express Base rev6.0 v1.0, 4.2.7 Link Training and Status
State Rules, Lane Error Status is normal to record the error when link
training. To make sure Lane Error Status is correct in OS runtime,
add a Kconfig PCIEXP_LANE_ERR_STAT_CLEAR that clears the PCIe lane error
status register at the end of PCIe link training.
Test=On Crater Lake, lspci -vvv shows
bb:01.0 PCI bridge: Intel Corporation Device 352a (rev 03)
(prog-if 00 [Normal decode])
Capabilities: [a30 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: LaneErr at lane: 0
Signed-off-by: Wilson Chou <Wilson.Chou@quantatw.com>
Change-Id: I6344223636409d8fc25e365a6375fc81e69f41a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The Kinox fan speed/duty table has 20 elements so raise the
DPTF_MAX_FAN_PERF_STATES from 10 to 20.
BUG=b:244262869
TEST=Boot to ChromeOS. Using SDV system, enter duty value, and then
system feedback fan speed.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Iacd3ef0da926df5d174b215ab8ea4adc1a8b672e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67390
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
PCI ID taken from Intel doc #569262.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I31d4b7edf3288794c86a6d2b78acdc4cf0ac611f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI ID taken from Intel doc #569262.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5812e536f3e1c49a272a0b337cc69f3d8f30677f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67402
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add xxhash functions. This is a very fast hash function, running at RAM
speed limits.
This code was adapted from the linux kernel with minor modifications to
make it fit in coreboot.
BUG=b:193557430
TEST=compile
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I8108af5ab14d8e6c6f5859bd36155c7d254e892c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The header file `rules.h` is automatically included in the build by the
top level makefile using the command:
`-include src/soc/intel/common/block/scs/early_mmc.c`.
Similar to `config.h` and 'kconfig.h`, this file does not need to be
included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add multiple fan support for dptf policies
BUG=b:235254828
BRANCH=None
TEST=Built and tested on Redrix system for two fans
Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `IORESOURCE_ABOVE_4G` flag was only explicitly set for our dummy
device that reserves resources behind a hotplug port. The current re-
source allocator implicitly extends this to all devices below the port,
including real ones. Let's make that explicit, so future changes to the
allocator can't break this rule.
Change-Id: Id4c90b60682cf5c8949cde25362d286625b3e953
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66719
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add option to resource allocator v4 that restores the top-down
allocation approach at the domain level.
This makes it easier to handle 64-bit resources natively. With
the top-down approach, resources that can be placed either above
or below 4G would be placed above, to save precious space below
the 4G boundary.
Change-Id: Iaf463d3e6b37d52e46761d8e210034fded58a8a4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Some devices require that several bytes are written with a single I2C
write command. Extend the i2c_bus interface functions and add both, read
and write for more than one byte at a defined byte offset.
Change-Id: I0eec2e1d4185170f02b4ab35aa6546dc69569303
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67098
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
As the frequency field in the SMBIOS type 17 table is deprecated,
we need to provide the maximum and configured speed in MT/s. Add
a method to convert from frequency to MT/s using a lookup table.
BUG=b:239000826
TEST=Build and verify with other patches in train
Change-Id: I0402b33a667f7d72918365a6a79b13c5b1719c0d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Vendors can choose to add non-standard capabilities inside a
Vendor-Specific Extended Capability. These are identified by
the Extended Capability ID 0x0b.
Change-Id: Idd6dd0e98bd53b19077afdd4c402114578bec966
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move the `offset` parameter into pciexp_find_extended_cap(). If it's
called with `0`, we start a new search. If it's an existing offset,
we continue the search.
This makes it easier to search for multiple occurences of a capa-
bility in a single loop.
Change-Id: I80115372a82523b90460d97f0fd0fa565c3f56cb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
A 32-bit long storing microseconds will rollover every ~1.19 hours.
This can cause stopwatch to misbehave, causing unexpected failures.
If the current field in stopwatch is near 2^31, the expires field may
rollover when initialized. If this occurs, stopwatch_expired() will
instantly return true.
If current and expires fields are near 2^31, the current field could
rollover before being checked. In this case, stopwatch_expired() will
not return true for over an hour. Also stopwatch_duration_usecs() will
return a large negative duration.
This issue has only been observed in SMM since it never takes more
than 35 minutes to boot.
Switching to uint64_t mitigates this issue since it will not rollover
for over 500K+ years. The raw TSC would rollover sooner than this,
~200 years, depending on the tick frequency.
BUG=b:237082996
BRANCH=All
TEST=Boot Nipperkin
Change-Id: I4c24894718f093ac7cd1e434410bc64e6436869a
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65403
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- ADP_P_* -> RPP_S_* (got mixed up I guess)
- Remove duplicates of ADP_S_ESPI_*
- Add infix _ESPI_ to all ADP_S device ID's
Document: 619362
Change-Id: Ic18ecbd420fc598f0ef6e3cf38e987ac3ae6067e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66629
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
R680E, Q670E, H610E are the ADL-S IoT variants
TEST=Boot ADL-S RVP DDR5 and see silicon info is reported
as PCH: AlderLake-S R680E
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I1804994b4b72f0484eabb15323736679d2668078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds SPDX identifiers to the remaining source files in the
include directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0dbf4c839eacf957eb6f272aa8bfa1eeedc0886f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66501
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some PCI capabilities should only be enabled if it is available not
only on a device, but also all bridge upstream of it. Checking only
the device and the bridge just above it may not be enough.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I1237d3b4b86dd0ae5eb586e3c3c407362e6ca291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66383
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX-License-Identifiers to all of the files in src/include
that are missing them or have unrecognized identifiers.
Files that were written specifically for coreboot and don't have license
information are licensed GPL-2.0-only, which is the license for the
overall coreboot project.
Files that were sourced from Linux are similarly GPL-2.0-only.
The cpu/power files were committed with source that was licensed as
GPL-2.0-or-later, so presumably that's the license for that entire
commit.
The final file, vbe.h gives a pointer to the BSD-2-Clause license
at opensource.org.
Change-Id: I3f8fd7848ce11c1a0060e05903fb17a7583b4725
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add option to do AP bringup with LAPICs in XAPIC mode and
switch to X2APIC later in CPU init.
Change-Id: I94c9daa3bc7173628f84094a3d5ca59e699ad334
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65766
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3e439a293c6b4a806cae7c6a56d28e61f7e57044
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61555
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
These enums & macros will be used to report resources with acpigen_*
functions (Currently those resources are reported in northbridge.asl,
but follow-up CLs will remove this file and add the need acpigen code).
BUG=b:148759816
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage' builds correctly.
Tested on an Anahera device which successfully boots to ChromeOS
with kernel version 5.10.109-15688-g857e654d1705.
Change-Id: I5b95c9b8370db63537eb48b640ad8f0e750efd69
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65768
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows the compiler to optimize out code called after run_ramstage.
Also remove some die() statements in soc code as run_ramstage already
has a die_with_postcode statement.
Change-Id: Id8b841712661d3257b0dc67b509f97bdc31fcf6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add 0x7d55 as another ID for Meteor Lake graphics controllers.
TEST=Boot with MTL silicon to check coreboot log for DID2
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iea01f6d4f2469fc0eeac73a3f1c4b9af1f39463c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I8e8b9ec6ae82de7d7aa2302097fc66f47b782323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65117
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only callsites in intel/xeon_sp were replaced with calls to
log_resource() and functionality is provided with LOG_RESOURCE()
now.
Change-Id: Ie44694f7a0b119d10f1bef9158fa30e71c312a55
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55478
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These should help to make the reviews as platforms
remove KiB scaling.
Change-Id: I40644f873c0ea993353753c0ef40df4c83233355
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Function fixed_io_resource() and alias io_resource() were
previously unused. Unlike previously, IORESOURCE_STORED flag
needs to be set by the caller, when necessary.
For fixed resources, fields alignment, granularity and
limit need not be initialised, as the resource cannot
be moved. It is assumed the caller provides valid base
and size parameters.
Change-Id: I8fb4cf2dee4f5193e5652648b63c0ecba7b8bab2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Unlike fixed_mem_resource_kb() the arguments are not in KiB.
This allows coccinelle script to assign the base and size
without applying the KiB division or 10 bit right-shift.
Unlike with fixed_mem_resource_kb() the IORESOURCE_STORED flag is
passed in the flags parameter until some inconsistencies in the tree
get resolved.
Change-Id: I2cc9ef94b60d62aaf4374f400b7e05b86e4664d2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add Meteor Lake SA device ID 0x7d14 (4+8, 15W).
BUG=b:224325352
TEST=Able to build MTL SoC and verified SA DID is now shown proper.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I051a40136ed89e837945bf4569c77d2a80375ed6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65111
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a newer API to reload the microcode patch when
SoC selects RELOAD_MICROCODE_PATCH config.
Expected to call this API being independent of CPU MP Init regular
flow hence, doesn't regress the boot time.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If480e44b88d04e5cb25d7104961b70f7be041a23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update according to DSP0134: https://www.dmtf.org/standards/smbios
Change-Id: Iceccc672eaef0ad0bc0589797fa15d2a6a918918
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Based on DOC #619501, #619362 and #618427
TEST=Boot MSI PRO Z690-A DDR4 WIFI and see the silicon info is
reported as ADL-S.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8051113515ef63fc4687f53d25140a3f55aadb6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Sabrina uses the SVI3 spec for VID tables which is incompatible with the
SVI2 spec used on PCO/CZN. Move the defines from common to soc and
update the decoding for sabrina.
See NDA docs #56413 for SVI3 and #48022 for SVI2 VID tables
TEST=timeless builds on mandolin/majolica for PCO/CZN
build chausie and verify pstate power is correct in ACPI tables
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I915e962f11615246690c6be1bee3533336a808f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65001
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
It might be possible to have this used for more than x86, but that
will be for a later commit.
Change-Id: I4968364a95b5c69c21d3915d302d23e6f1ca182f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
With a combined bootblock+romstage ENV_ROMSTAGE might no
longer evaluate true.
Change-Id: I733cf4e4ab177e35cd260318556ece1e73d082dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63376
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch removes the MTL CNVi DIDs macros from IA common code and is
added into the generic wifi driver.
As per Intel Connectivity Platform BIOS Guide, Connectivity Controller
IP for MTL-P is `Magnetar` and supported CRF is `Typhoon Peak 2`.
Previously Garfield Peak DIDs for Alder Lake SoC also added similarly
to generic wifi drivers.
BUG=b:224325352
TEST=Able to build and boot on MTL emulator.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib98762749c71f63df3e8d03be910539469359c68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
When each AP needs to do a lot of printing 1 sec is not enough.
Change-Id: I00f0a49bf60f3915547924c34a62dd0044b0c918
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64828
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
|
|
Taken from the Linux Kernel.
Tested: Qemu using '-cpu pentium3' now boots.
Change-Id: I376f86f4d7992344dd68374ba67ad3580070f4d8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Tested with SMI_DEBUG: SMM prints things on the console.
Change-Id: I7db55aaabd16a6ef585c4802218790bf04650b13
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that mtrr_use_temp_range() can deal with multiple ranges there is no
need to expose this to restore the MTRR solution.
This reverts commit 00aaffaf470adfbaa0fbfa0ec3cc67311763810b.
Change-Id: Ib77a0f52228cd2f19f3227824f704ac690be4aba
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64803
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
