summaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2017-09-11cpu/x86/mp_init: remove adjust_cpu_apic_entry()Aaron Durbin
The original purpose of adjust_cpu_apic_entry() was to set up an APIC map. That map was effectively only used for mapping *default* APIC id to CPU number in the SMM handler. The normal AP startup path didn't need this mapping because it was whoever won the race got the next cpu number. Instead of statically calculating (and wrong) just initialize the default APIC id map when the APs come online. Once the APs are online the SMM handler is loaded and the mapping is utilized. Change-Id: Idff3b8cfc17aef0729d3193b4499116a013b7930 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-08soc/intel/common/block: Common ACPIShaunak Saha
This patch adds the common acpi code.ACPI code is very similar accross different intel chipsets.This patch is an effort to move those code in common place so that it can be shared accross different intel platforms instead of duplicating for each platform. We are removing the common acpi files in src/soc/intel/common. This removes the acpi.c file which was previously in src/soc/common/acpi. The config for common acpi is SOC_INTEL_COMMON_BLOCK_ACPI which can be defined in SOC's Kconfig file in order to use the common ACPI code. This patch also includes the changes in APL platform to use the common ACPI block. TEST= Tested the patch as below: 1.Builds and system boots up with the patch. 2.Check all the ACPI tables are present in /sys/firmware/acpi/tables 3.Check SCI's are properly working as we are modifying the function to override madt. 4.Extract acpi tables like DSDT,APIC, FACP, FACS and decompile the by iasl and compare with good known tables. 5.Execute the extracted tables in aciexec to check acpi methods are working properly. Change-Id: Ib6eb6fd5366e6e28fd81bc22d050b0efa05a2e5d Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-08stage_cache: Add rmodule params in metadataKyösti Mälkki
The change allows to update rmodule parameters after it has been loaded from stage cache. Change-Id: Ib825ffe245d447ad3a8246f7dbd52c6e34103a0c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-06device/dram/ddr2: Add a function to normalize tCLKArthur Heymans
Also make most significant bit function accessible outside the scope of this file. Change-Id: I3ab39d38a243edddfde8f70ebd23f79ff774e90e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-05Move ADDR32() hack to arch/x86Patrick Georgi
It's arch specific, so no need to pollute non-x86 with it. Change-Id: I99ec76d591789db186e8a33774565e5a04fc4e47 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/21392 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02cpu/x86/smm: Fix explicit 'addr32' usage in clang buildsEdward O'Callaghan
The addr32 prefix is required by binutils, because even when given an explicit address which is greater than 64KiB, it will throw a warning about truncation, and stupidly emit the opcode with a 16-bit addressing mode and the wrong address. However, in the case of LLVM, this doesn't happen, and is happy to just use 32-bit addressing whenever it may require it. This means that LLVM never really needs an explicit addr32 prefix to use 32-bit addressing in 16-bit mode. Change-Id: Ia160d3f7da6653ea24c8229dc26f265e5f15aabb Also-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-08-22AMD K8 fam10-15: Tidy up CAR stack switchKyösti Mälkki
Return to empty stack before making the switch. Change-Id: I6d6f633933fac5bc08d9542c371715f737fb42cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22AMD K8 fam10-15: Tidy up CAR disableKyösti Mälkki
Avoid conflicting disable_cache_as_ram() declaration and tidy up include for inlined function. Change-Id: Iba77c711f5eb023566b7d8ba148583948661bc99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-19arch/x86: Clean up CONFIG_SMP and MAX_CPUS testKyösti Mälkki
Change-Id: I7c138758707f87c0d7a827b6887c7752d3714cde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-19arch/x86: Fix ugly NEED_LAPIC useKyösti Mälkki
Change-Id: I2d6fdfd0465fe5f558daa04c6f980f7226596b55 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21087 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-18device/smbus: Reuse I2C bus operations where applicableNico Huber
Reuse generic I2C functions that work for SMBus operations as well. Change-Id: I5a93f17b905de38752254891aa4347ba4ed3b205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18Reinvent I2C opsNico Huber
Do not use the global platform_i2c_transfer() function that can only be implemented by a single driver. Instead, make a `struct device` aware transfer() function the only interface function for I2C controller dri- vers to implement. To not force the slave device drivers to be implemented either above generic I2C or specialized SMBus operations, we support SMBus control- lers in the slave device interface too. We start with four simple slave functions: i2c_readb(), i2c_writeb(), i2c_readb_at() and i2c_writeb_at(). They are all compatible to respec- tive SMBus functions. But we keep aliases because it would be weird to force e.g. an I2C EEPROM driver to call smbus_read_byte(). Change-Id: I98386f91bf4799ba3df84ec8bc0f64edd4142818 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15device/smbus: Drop some never used boilerplateNico Huber
It was added with the words "Update the device header files" and we maintained it for nearly 13 years :) These functions are part of the SMBus spec but they are rarely used and keeping them just in case increases the maintenance burden. Change-Id: I69a1ea155a21463fc09b7b2c5b7302515a0030b2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-14console: Add weak method to notify about deathPatrick Rudolph
Call weak method die_notify. The method should be overwritten in mainboard directory to signal that a fatal error had occurred. On boards that do share the same EC and where the EC is capable of controlling LEDs or a buzzer the method can be overwritten in EC directory instead. Tested on Lenovo T500. Change-Id: I71f8ddfc96047e8a0d39f084588db1fe2f251612 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19696 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-10SMBIOS: Correct length calculation for empty string tableKonstantin Aladyshev
If all strings in SMBIOS table are empty, smbios_string_table_len function should return 2, cause every table must end with "\0\0". Also replace "eos" field type in smbios structures from char to u8. Change-Id: Ia3178b0030aa71e1ff11a3fd3d102942f0027eb1 Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-on: https://review.coreboot.org/20840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-09device/pci: untangle struct device and device_tAaron Durbin
This patch uses struct device explicitly for the ramstage functions as that's the actual type it's working on. Additionally, the declarations for types and functions are fully exposed so that compliation units don't have to guard certain functions from use because it's being compiled for multiple stages. Change-Id: I8db23ed400a59073e1e66522d020a5928f71f3a6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-08add __must_check to */compiler.hCaveh Jalali
the __must_check function attribute is pretty much straight from the linux kernel - used to encourage callers to consume function return values. Change-Id: I1812d957b745d6bebe2a8d34a9c4862316aa8530 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/20881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07usbdebug: Refactor early enableKyösti Mälkki
Always sanity check for EHCI class device and move PCI function power enablement up. Change-Id: I1eebe813fbb420738af2d572178213fc660f392a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-06sb/intel/*: Use common SMBus functionsArthur Heymans
All Intel southbridges implement the same SMBus functions. This patch replaces all these similar and mostly identical implementations with a common file. This also makes i2c block read available to all those southbridges. If the northbridge has to read a lot of SPD bytes sequentially, using this function can reduce the time being spent to read SPD five-fold. Change-Id: I93bb186e04e8c32dff04fc1abe4b5ecbc4c9c962 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-04lib/cbmem: provide optional cbmem top initialization hookAaron Durbin
Provide a hook to allow an optional one-time cbmem_top() initialization. The new function, cbmem_top_init(), is called on the first expected initialization of cbmem based on the Kconfig options LATE_CBMEM_INIT and EARLY_CBMEM_INIT. Change-Id: I89edd2d11f226217c8e2aaca829b4f375a2cff28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-03lib/cbmem: remove cbmem_region_used()Aaron Durbin
The cbmem_region_used() function wasn't being utilized outside this module. Threfore, reduce the surface area. Change-Id: I28a9d02221048ab0aa4cd3d986d17ee7692ce636 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-01src/include: Add guards on all header filesMartin Roth
Change-Id: I2d7d4e0b25f2cf3eef2040f89d5ebc711909cdd7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-28driver/intel/wifi: Update wifi wake source in elogNaresh G Solanki
In S3 resume, wifi is one of the wake sources. If elog is enabled in config, then log wifi wakes in elog. BUG=b:36992859 TEST= Build for Soraka. Do WoWlan during S3. Verify elog having update on wake due to Wifi. Change-Id: I7d42c5c81e0a3f7a3f94c3f6b7d2ebdf029d1aff Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27timestamp: Apply factor to recorded stampsKyösti Mälkki
If we dont have a constant TSC rate, timestamp table has odd leaps and may appear to run backwards. Add functionality to apply a factor such that all stamps are in the same timebase. Change-Id: Idab9c2c00e117c4d247db8cc9a2897640fa01edd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-26Port cmos.default handling to C environment bootblockNico Huber
Gather related code in the new file drivers/pc80/rtc/mc146818rtc_boot.c, call sanitize_cmos() from C environment bootblock. Change-Id: Ia5c64de208a5986299c0508d0e11eeb8473deef1 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-25soc/intel/skylake: Add IGD id for mobile Xeon with GT2Nico Huber
Change-Id: I2cd210dd0443b854294ce7ee8e267594e3ea1780 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20651 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-21soc/intel/apollolake: Add pci device id for GLK IGDHannah Williams
Change-Id: Id2c94afed8976687524a0913ea1c13aeddd98333 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/20654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-18vboot: Remove get_sw_write_protect_state callbackJulius Werner
We've just decided to remove the only known use of the VBSD_SW_WP flag in vboot (https://chromium-review.googlesource.com/c/575389), since it was unused and never reliable on all platforms anyway. Therefore, we can now also remove the coreboot infrastructure that supported it. It doesn't really hurt anyone, but removing it saves a small bit of effort for future platforms. Change-Id: I6706eba2761a73482e03f3bf46343cf1d84f154b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-17intel/fsp: Add and use new post codes for FSP phase indicationSubrata Banik
New post codes are POST_FSP_MEMORY_EXIT POST_FSP_SILICON_EXIT This patch will make it more consistent to debug FSP hang and reset issues. Bug=none Branch=none TEST=Build and Boot on eve Change-Id: I93004a09c2a3a97ac9458a0f686ab42415af19fb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-16assert: Add new dead_code() macro to assert dead code pathsJulius Werner
This patch adds a new kind of compile-time assertion based on Linux' compiletime_assert(). The difference to the existing use of _Static_assert() in coreboot (which should continue to be used where appropriate) is that this new assertion only hits if the call to it is not optimized out at compile time. It is therefore ideal to assert that certain code paths are not included in the image if a certain Kconfig option is (not) set. For example, assert(!IS_ENABLED(CONFIG_THAT_MAKES_THIS_INAPPROPRIATE)); can be rewritten as if (!IS_ENABLED(CONFIG_THAT_MAKES_THIS_INAPPROPRIATE)) dead_code("This code shouldn't be built for config X"); to turn it into a compile-time check. Change-Id: Ida2911e2e4b3191a00d09231b493bf755e6f0fcb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20585 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-14geode_lx: Move declaration to another headerKyösti Mälkki
Change-Id: I1dc51c5171e04e8ba917429e74a23887989d9619 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-13src/include: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I2fbe6376a1cf98d328464556917638a5679641d2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-06smbios: Correct the system enclosure typesElyes HAOUAS
Regarding the "System Management BIOS Reference Specification" Version: 3.1.1, Date: 2017-01-12, Laptop system enclosure is 0x09 and for Notebook it is 0x0a Change-Id: I5538be0b434eed20d76aef6f26247e46d1225feb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-01elog: Update for EC Device EventsDuncan Laurie
Replace the unused "thermal overload" event with the new "device event" and define the first few device events that are supported by the Chromium EC. BUG=b:30624430 TEST=build for google/* mainboards Change-Id: I1f3aeedb87c2aad29a0a67b5c50c29a6961fb45f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-29lib/spd_bin: Use proper I2C addressesNico Huber
Use the plain address instead of the weird shifted encoding (e.g. if we'd use `0xa0` as address, it's actually `0x50` encoded into a write command). Change-Id: I6febb2e04e1c6de4294dfa37bde16b147a80b7a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-28amd/family15h: Add defines for boost and P-stateMarshall Dawson
Add definitions for the P-state 0 MSR and Core Performance Boost Control. BUG=chrome-os-partner:62578062 Change-Id: I0c16dde17f1be41a3310c3ccefe3936aba0e8ec0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27include/device: Add pci ids for Intel CNLLijian Zhao
Change-Id: Ia76c391e04e1e11bd110764902b91ef4ed5e8490 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-26soc/amd/stoneyridge: Add CPU filesMarc Jones
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. This is the second patch in the process of converting Stoney Ridge to soc/. Changes: - update Kconfig and Makefiles - update vendorcode/amd for new soc/ path Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-22device/dram/ddr3.h: Add brackets around macroArthur Heymans
This fixes improper dram frequency being displayed in sandy bridge native raminit. Change-Id: I1fe4e4331f45ce1c21113c039b8433252326293d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-22cpu/x86/smm: fix up types in module loaderAaron Durbin
For sizes and dimensions use size_t. For pointer casts use uintptr_t. Also, use the ALIGN_UP macro instead of open coding the operation. Change-Id: Id28968e60e51f46662c37249277454998afd5c0d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20241 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-19cpu/x86/smm/smihandler: Apply cosmetic changesPatrick Rudolph
Use define for SSA base address. Move EM64T area to 0x7c00 and add reserved area of size 0x100, as there's no indication that the address 0x7d00 exists on any platform. No functional change. Change-Id: I38c405c8977f5dd571e0da3a44fcad4738b696b2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-16haswell: add CBMEM_MEMINFO table when initing RAMMatt DeVillier
Populate a memory_info struct with PEI and SPD data, in order to inject the CBMEM_INFO table necessary to populate a type17 SMBIOS table. On Broadwell, this is done by the MRC binary, but the older Haswell MRC binary doesn't populate the pei_data struct with all the info needed, so we have to pull it from the SPD. Some values are hardcoded based on platform specifications. Change-Id: Iea837d23f2c9c1c943e0db28cf81b265f054e9d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-12nb/intel/sandybridge: Improve CAS freq selectionArthur Heymans
The previous code seemed weird and tried to check if its selected value is supported three times. This also lower the clock if a selected frequency does not result in a supported CAS number. Change-Id: I97244bc3940813c5a5fcbd770d71cca76d21fcae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-06-09elog: Add more detailed wake source events for USB2.0/3.0 port wakeFurquan Shaikh
BUG=b:37088992 Change-Id: If0b495234d6e498d5c64ba4dd186440cd7a1c5c6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09cpu/x86/mtrr: further expose declarations of functionsAaron Durbin
Like the previous commit allow the declarations of functions to be exposed to all stages unless ROMCC is employed. Change-Id: Ie4dfc32f38890938b90ef8e4bc35652d1c44deb5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-09device/dram/ddr2.c: Fix is_registered_ddr2Arthur Heymans
Type 0x10 is mini RDIMM according to JEDEC DDR2 SPD specifications. Change-Id: I6d35bd74961326ebd9225f044313b107aca24bda Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-05cpu/x86/mtrr: don't guard function declarationsAaron Durbin
set_var_mtrr() and get_free_var_mtrr() don't need to be guarded against various stages. It just complicates code which lives in a compilation unit that is compiled for multiple stages by needing to reflect the same guarding. Instead, just drop the declaration guard. earlymtrr.c is still just compiled for earlier stages, but if needed it's easy to move to a mtrr_util.c that is compiled for all stages. Change-Id: Id6be6f613771380d5ce803eacf1a0c8b230790b6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20018 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-04console/flashsconsole: Add spi flash console for debuggingYouness Alaoui
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem messages to the 'CONSOLE' area in FMAP which allows us to grab the log when we read the flash. This is useful when you don't have usb debugging, and UART lines are hard to find. Since a failure to boot would require a hardware flasher anyways, we can get the log at the same time. This feature should only be used when no alternative is found and only when we can't boot the system, because excessive writes to the flash is not recommended. This has been tested on purism/librem13 v2 and librem 15 v3 which run Intel Skylake hardware. It has not been tested on other archs or with a driver other than the fast_spi. Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02device/device_util: Add function to determine bridge statePatrick Rudolph
Add a method to get the state of a bridge device. Return true if at least one enabled device on the secondary bus is found. Useful to disable non hotplugable bridges without any devices attached. Change-Id: Ic8fe539d233031d4d177b03dd2c03edb5ab8c88d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-01src/include/device: Add System Agent (SA) device idsSubrata Banik
Change-Id: Iddc9f8187d1ff4a51bf3bf42a266b79007c42f3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01include/device: Add pci ids for Intel SDBora Guvendik
Change-Id: Iee966991ffd0f73cee9520c85eeba6530e224457 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-30lib/edid: Split out fill_lb_framebuffer()Nico Huber
Place it into new edid_fill_fb.c, and invert the logic of the Kconfig guard (NATIVE_VGA_INIT_USE_EDID is now !NO_EDID_FILL_FB). It has to be selected by all drivers that use MAINBOARD_DO_NATIVE_VGA_INIT but pro- vide their own fill_lb_framebuffer() implementation. Change-Id: I90634b835bd8e2d150b1c714328a5b2774d891bd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-27lib/spd_bin: make SMBus SPD addresses an inputAaron Durbin
Instead of assuming the mapping of dimm number to SPD SMBus address, allow the mainboard to provide its own mapping. That way, global resources of empty SPD contents aren't wasted in order to address a dimm on a mainboard that doesn't meet the current assumption. Change-Id: Id0e79231dc2303373badaae003038a1ac06a5635 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-05-27CBMEM: Clarify CBMEM_TOP_BACKUP function usageKyösti Mälkki
The deprecated LATE_CBMEM_INIT function is renamed: set_top_of_ram -> set_late_cbmem_top Obscure term top_of_ram is replaced: backup_top_of_ram -> backup_top_of_low_cacheable get_top_of_ram -> restore_top_of_low_cacheable New function that always resolves to CBMEM top boundary, with or without SMM, is named restore_cbmem_top(). Change-Id: I61d20f94840ad61e9fd55976e5aa8c27040b8fb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27elog: Add more wake sourcesFurquan Shaikh
Add wake sources for PME events generated by different devices. BUG=b:37088992 Change-Id: I25098f489f401148171c235cb341f6e7bb2b635b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22include/device: Add pci ids for Intel GLKHannah Williams
Change-Id: Ifbca20a0c38cc1fb8ee4b4e336d59e834fcaf57a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19686 Reviewed-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22elog: Add a new elog type for deep Sx variantFurquan Shaikh
This is useful for debugging based on eventlog to identify if platform entered normal or deep Sx. BUG=b:38436041 Change-Id: Ic7d8e5b8aafc07aed385fe3c4831ab7d29e1f890 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22Kconfig: Move and clean up CONFIG_VGANico Huber
Change-Id: I6e710b95cade0ea68f787f33c0070613d64b6da6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-05-22include/console: Use IS_ENABLED() macroNico Huber
Change-Id: I3d0c61c37399e96c1d154c1d3af5c47db967a07a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19763 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Add page_size to struct spi_flashFurquan Shaikh
Add a new member page_size to spi_flash structure so that the various spi flash drivers can store this info in spi_flash along with the other sizes (sector size and total size) during flash probe. This removes the need to have {driver}_spi_flash structure in every spi flash driver. This is part of patch series to clean up the SPI flash and SPI driver interface. BUG=b:38330715 Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18vbe: remove the necessity for a global vbe_mode_info_valid()Aaron Durbin
There's no users of vbe_mode_info_valid() aside from the local compilation units. Remove the declaration and make the function static to the current global implementers. Change-Id: I4872ac6ad15ba6a86bba69d51a8348b9921c152d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-18coreboot_tables: specify clear interface for lb_framebuffer()Aaron Durbin
For some reason the "interface" for adding framebuffer information is sitting in src/include/vbe.h while also guarding the call to fill_lb_framebuffer() with vbe_mode_info_valid() along with some macro if CONFIG_* for good measure. Move the fill_lb_framebuffer() declaration to coreboot_tables.h and provide a comment about how it should be used. Also, now that there's no need for the notion of a global vbe_mode_info_valid() remove it from the conditional call path of fill_lb_framebuffer(). Change-Id: Ib3ade6314624091ae70424664527a02b279d0c9b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-18AMD MTRR: Add common add_uma_resource_below_tolm()Kyösti Mälkki
Change-Id: I9eee88dc619ac5d9c77153db522a6ead65f6c9b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-18CBMEM: Add config CBMEM_TOP_BACKUPKyösti Mälkki
AGESA and binaryPI boards have no easy way to determine correct cbmem_top() location early enough when GFXUMA is enabled, so they will use these functions with EARLY_CBMEM_INIT as well. At the end of AmdInitPost() the decisions of UMA base and size have not been written to hardware yet. The decisions are stored inside AGESA heap object we cannot locate from coreboot proper until after AmdInitEnv(). Modify code such that weak backup functions are only defined for LATE_CBMEM_INIT; they are somewhat troublesome to handle. Change-Id: Ifef4f75b36bc6dee6cd56d1d9164281d9b2a4f2a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19306 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-16cpu/intel/turbo: Add option to disable turboSubrata Banik
disable_turbo function can be used to disable turbo mode on each processor by settings MSR 0x1A0 bit 38. This option will help to perform some quick test without enabling turbo mode. Change-Id: If3e387e16e9fa6f63cb0ffff6ab2759b447e7c5c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-13src/include/device: Add PCIe root ports device idsAamir Bohra
Change-Id: Ic2df7fb1e4a3d3c52561b949c4b359ea59824387 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19664 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-13drivers/pc80/rtc: Rename mc146818rtc_early.c -> _romcc.cNico Huber
And don't link it. It's for ROMCC. To make code happy that uses the ROMCC interface read_option(), read_option_lowlevel() is ported to mc146818rtc.c along with a message to use get_option() instead. Change-Id: I54ea08de034766c8140b320075d36d5e811582fa Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-10drivers/storage: Make DRVR_CAP_8BIT controller independentLee Leahy
Promote DRVR_CAP_8BIT from controller specific to controller independent TEST=Build and run on Galileo Gen2 Change-Id: I51e4c990d3941a9f31915a5703095f92309760f1 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-10drivers/storage: Remove set_control_regLee Leahy
Remove unused field in generic SD/MMC controller data structure. TEST=Build and run on Galileo Gen2 Change-Id: I7169dca07509a6f2513d62b593742daf764010b2 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-05-05cr50: check if the new image needs to be enabled and act on itVadim Bendebury
The AP sends the Cr50 a request to enable the new firmware image. If the new Cr50 image was found and enabled, the AP expects the Cr50 to reset the device in 1 second. While waiting for the Cr50 to reset, the AP logs a newly defined event and optionally shuts down the system. By default the x86 systems power off as shutting those systems down is not board specific. BRANCH=gru,reef BUG=b:35580805 TEST=built a reef image, observed that in case cr50 image is updated, after the next reboot the AP stops booting before loading depthcharge, reports upcoming reset and waits for it. Once the system is booted after that, the new event can be found in the log: localhost ~ # mosys eventlog list ... 7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode 8 | 2017-03-23 18:42:13 | Unknown | 0xac 9 | 2017-03-23 18:42:21 | System boot | 46 ... Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-05pci_device: add PCI device IDs for Intel platformsRizwan Qureshi
Add host of PCI device Ids for IPs in Intel platforms. Change-Id: I0eee9409df3e6dc326b60bc82c2b715c70e7debd Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03lib/edid: Save the display ASCII stringArthur Heymans
Change-Id: Ic31af53dcb9947e2264c809ee8f80ea4f89f347d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03lib/edid.c: Differentiate between absent and non-conformant EDIDArthur Heymans
Change-Id: Id90aa210ff72092c4ab638a7bafb82bd11889bdc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-25AMD Geode: Move conflicting mainboard_romstage_entry()Marc Jones
The silicon specific mainboard_romstage_entry() in amd/cpu/car.h, which is used by all AMD silicon car code, caused a conflict. Move the silicon specific defines to silicon header files. Also, no longer include car.h in the romstage file. Change-Id: Icfc759c4c93c8dfff76f5ef9a1a985dd704cfe94 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18769 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25drivers/storage: Add SD/MMC/eMMC driver based upon depthchargeLee Leahy
The SD/MMC support is broken into several pieces. There are three main data structures: * sdhci_ctrlr - This is SDHCI controller specific and defined in include/device/sdhci.h * sd_mmc_ctrlr - This contains generic controller management data and defined in include/device/sd_mmc_ctrlr.h * storage_media - This contains the flash storage device management data and is defined in include/device/storage.h The SD/MMC driver consists of several components: * SDHCI controller code * bouncebuf.c * bouncebuf.h * pci_sdhci.c * sdhci.c * sdhci.h * sdhci_adma.c * sdhci_display.c * Flash storage device support * mmc.c * mmc.h * sd.c * sd_mmc.c * sd_mmc.h * storage.c * storage.h * storage_erase.c * storage_write.c Kconfig values enable various portions of the controller and storage drivers to be built to reduce the overall size of what is included in the final image. Full read/write/erase operations are provided for those platforms which want to take advantage. It is also possible to build the driver to perform initialization only. By default, this driver is not included in any platform, platforms must specifically select DRIVERS_STORAGE to add the SD/MMC support. After this patch is reviewed and merged, there are some additional patches: * Common CAR storage area - Use a predefined region of CAR to pass data structures between bootblock through to romstage. This allows early stages to preform the SD/MMC device initialization and later stages to use the SD/MMC device without further initialization. The example code initializes the SD/MMC device in bootblock and uses the SD/MMC device in romstage without further initialization. * CBMEM ID - Add a CBMEM ID value for the data structures so that they may be passed from romstage to ramstage and eventually the payload. The example uses the SD/MMC device in ramstage without further initialization. * Move the SD/MMC driver into commonlib * Have libpayload build the SD/MMC driver from commonlib. The intent is to pass the controller state to libpayload so that the SD/MMC device can be used without further initialization. * On some platforms, have depthcharge use the commonlib SD/MMC driver History: Copy the SD/MMC driver from depthcharge revision eb583fa8 into coreboot and make the following changes: * Removed #include "config.h" from mmc.c, allow the lint tests to pass. * Move include files from drivers/storage into include/device. * Rename mmc.h to storage.h. * Add the Kconfig and Makefile and make edits to get the code to build. * Add support to initialize a PCI controller. * Fix formatting issues detected by checkpatch. * Fix data flow issues detected by checkpatch. * Add the missing voltage (MMC_VDD_35_36) into the voltage mask. * Rename the macros mmc_debug, mmc_trace and mmc_error to sd_mmc_*. * Replace printf with sd_mmc_error. * Add sdhc_debug, sdhc_trace and sd_error macros. * Add Kconfig values to enable storage device debugging and tracing. * Add tracing and debug support to the SDHCI driver. * Allow SOC to override more controller features. * Split out ADMA support. * Move 1V8 support into SOC routine. * Move HS400 support into SOC routine. * Rework clock handling. * Change all controller references to use ctrlr. * Update the voltage handling. * Update modes of operation. * Move DMA fields into MmcCtrlr. * Update bus width support. * Change MMC_TIMING_* to BUS_TIMING_*. * Rename MMC_MODE_ to DRVR_CAP. * Move quirks into ctrlr->caps. * Associate removeable with the controller. * Statically allocate MmcMedia. * Replace the SdhciHost structure with the MmcCtrlr structure. * Split the code to support other SD/MMC controllers. * Split out erase and write support. * Update the code to be more consistent with the coreboot coding style. * Only expose calling APIs. * Divide up mmc.c into 4 modules: MMC, SD, storage card, common code. * Update debug and error messages. * Add partition support. * Display clock frequencies once in MHz. * Remove mmc_send_cmd, use ctrlr->send_cmd instead. * Handle error from sd_send_op_cond. * Allow mainboard to control delays around CMD 0. * Support command logging. * Mainboard may set delay after SD/MMC command. * Display serial number with sd_mmc_trace. * Remove cmd set parameter from mmc_switch. * Display errors for timeout and comm errors. * Add LED support. * Move 64bit DMA flag into ctrlr->caps. * Rework PIO transfer routine. * Add HS200 bus tuning. * Add support for HS400. * Use same format for HS400, HS200 and HS52. * Reduce storage_media structure size * Add routine to update code pointers * Add display of storage setup * Display controller setup TEST=Build and run on Reef and Galileo Gen2 Change-Id: I9b5f9db1e27833e4ce4a97ad4f5ef3a46f64f2a2 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19208 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-19console: Add convenient debug level macros for raminitNico Huber
Change-Id: Ib92550fe755293ce8c65edf59242a2b04327128e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19332 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-13drivers/spi/tpm: Clean up SPI TPM driverFurquan Shaikh
1. Move common TIS macros to include/tpm.h. 2. Use common TIS macros while referring to status and access registers. 3. Add a new function claim_locality to properly check for required access bits and claim locality 0. BUG=b:36873582 Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19213 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-09drivers/spi: Get rid of spi_get_configFurquan Shaikh
There is only one user for spi_get_config i.e. SPI ACPI. Also, the values provided by spi_get_config are constant for now. Thus, get rid of the spi_get_config call and fill in these constant values in SPI ACPI code itself. If there is a need in the future to change these, appropriate device-tree configs can be added. BUG=b:36873582 Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05drivers/spi/tpm: using tpm irq to sync tpm transactionJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: Ib64107b17fb6e93dbe626ce92f3bc9da8b84784e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: https://chromium-review.googlesource.com/452284 Commit-Ready: Caesar Wang <wxt@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19113 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: Disable CAR with empty stackKyösti Mälkki
Calling disable_cache_as_ram() with valuables in stack is not a stable solution, as per documentation AMD_DISABLE_STACK should destroy stack in cache. Change-Id: I986bb7a88f53f7f7a0b05d4edcd5020f5dbeb4b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18626 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: Move romstage main entry under cpuKyösti Mälkki
As we now apply asmlinkage attributes to romstage_main() entry, also x86_64 passes parameters on the stack. Change-Id: If9938dbbe9a164c9c1029431499b51ffccb459c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18624 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05AGESA: Move amd_initmmio() callKyösti Mälkki
Function enables PCI MMCONF and XIP cache, it needs to be called before giving platform any chance of calling any PCI access functions. Change-Id: Ic044d4df7b93667fa987c29c810d0bd826af87ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18623 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Disallow separate verstage after romstage, try to clarify logicJulius Werner
No board has ever tried to combine CONFIG_SEPARATE_VERSTAGE with CONFIG_VBOOT_STARTS_IN_ROMSTAGE. There are probably many reasons why this wouldn't work (e.g. x86 CAR migration logic currently always assumes verstage code to run pre-migration). It would also not really make sense: the reason we use separate verstages is to decrease bootblock size (mitigating the boot speed cost of slow boot ROM SPI drivers) and to allow the SRAM-saving RETURN_FROM_VERSTAGE trick, neither of which would apply to the after-romstage case. It is better to just forbid that case explicitly and give programmers more guarantees about what the verstage is (e.g. now the assumption that it runs pre-RAM is always valid). Since Kconfig dependencies aren't always guaranteed in the face of 'select' statements, also add some explicit compile-time assertions to the vboot code. We can simplify some of the loader logic which now no longer needs to provide for the forbidden case. In addition, also try to make some of the loader logic more readable by writing it in a more functional style that allows us to put more assertions about which cases should be unreachable in there, which will hopefully make it more robust and fail-fast with future changes (e.g. addition of new stages). Change-Id: Iaf60040af4eff711d9b80ee0e5950ce05958b3aa Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18983 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-23cr50: add unmarshaling of vendor commands and process 'enable_update'Vadim Bendebury
The upcoming Cr50 firmware changes will require the AP to enable the previously downloaded Cr50 firmware update(s). A new vendor command (TPM2_CR50_SUB_CMD_TURN_UPDATE_ON) is used for that. The command accepts one parameter - a timeout value in range of 0 to 1000 ms. When processing the command the Cr50 checks if the alternative RO or RW image(s) need to be enabled, and if so - enables them and returns to the host the number of enabled headers. If the vendor command requested a non-zero timeout, the Cr50 starts a timer to trigger system reboot after the requested timeout expires. The host acts on the number of enabled headers - if the number is nonzero, the host prepares the device to be reset and waits for the Cr50 to reboot the device after timeout expires. This patch also adds more formal vendor command marshaling/unmarshaling to make future additions easier. BRANCH=gru,reef BUG=b:35580805 TEST=with the actual user of this code in the next patch verified that the cr50 update is enabled as expected. Change-Id: Ic76d384d637c0eeaad206e0a8242cbb8e2b19b37 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/18945 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-19cpu/x86: add a barrier with timeoutBora Guvendik
In case something goes wrong on one of the cpus, add the ability to use a barrier with timeout so that other cpus don't wait forever. Remove static from barrier wait and release. BUG=chrome-os-partner:59875 BRANCH=reef TEST=None Change-Id: Iab6bd30ddf7632c7a5785b338798960c26016b24 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/18107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>