summaryrefslogtreecommitdiff
path: root/src/include/pc80
AgeCommit message (Collapse)Author
2009-05-29Implement native VGA Support.Luc Verhaegen
This code brings a rather complete set of VGA IO routines for whoever wants it. These consist of the by now familiar read/write/mask sets. Due to the crazy nature of VGA, an ancient standard with bits all over the place, it makes no sense to define individual registers. You need a vga register spec at hand if you want to do anything anyway. These IO routines are always exposed. It also provides code to natively set up a 640x400 VGA textmode with an 8x16 font. The native VGA mode code is behind the OPTION_VGA option, as the font really adds to the size of the compiled/compressed rom. The font is the one also present in the linux kernel, but this file is unlicensed. Another copy of this is also present in coreboot in the deprecated console/btext code. The vga console code has been cleaned up, but it still has some TODO's left open, but that's for when i finally have found the remaining issue with the epia-m. Right now, it is important to get parts of my work out already and to make the remainder managable again. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4321 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-17Add VIA CX700 support, plus VIA vt8454c reference board support.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-20add a header file for i8259.h (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3881 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-19Fix a LOT of implicit function declarations before they become errors.Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3822 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-12-04small gcc4 patches, some ts5300 updatesStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2129 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-10-05Updating FSF address in the code.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-01-15add vga.h / needed by vga text console.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-21- Bump the LinuxBIOS major versionEric Biederman
- Rename chip_config chip_operations throughout the tree - Fix Config.lb on most of the Opteron Ports - Fix the amd 8000 chipset support for setting the subsystem vendor and device ids - Add detection of devices that are on the motherboard (i.e. In Config.lb) - Baby step in getting the resource limit handling correct, Ignore fixed resources - Only call enable_childrens_resources on devices we know will have children For some busses like i2c it is non-sense and we don't want it. - Set the resource limits for pnp devices resources. - Improve the resource size detection for pnp devices. - Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels - Added a header file to hold the prototype of isa_dma_init - Fixed most of the superio chips so the should work now, the via superio pci device is the exception. - The code compiles and runs so it is time for me to go to bed. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-17according to spec, sector size is 2048Greg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-13added atapi supportGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1415 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11- Moved hlt() to it's own header.Eric Biederman
- Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-06-09Moved from freebiosGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@862 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-04-22- Initial checkin of the freebios2 treeEric Biederman
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1