summaryrefslogtreecommitdiff
path: root/src/include/elog.h
AgeCommit message (Collapse)Author
2017-05-27elog: Add more wake sourcesFurquan Shaikh
Add wake sources for PME events generated by different devices. BUG=b:37088992 Change-Id: I25098f489f401148171c235cb341f6e7bb2b635b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22elog: Add a new elog type for deep Sx variantFurquan Shaikh
This is useful for debugging based on eventlog to identify if platform entered normal or deep Sx. BUG=b:38436041 Change-Id: Ic7d8e5b8aafc07aed385fe3c4831ab7d29e1f890 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05cr50: check if the new image needs to be enabled and act on itVadim Bendebury
The AP sends the Cr50 a request to enable the new firmware image. If the new Cr50 image was found and enabled, the AP expects the Cr50 to reset the device in 1 second. While waiting for the Cr50 to reset, the AP logs a newly defined event and optionally shuts down the system. By default the x86 systems power off as shutting those systems down is not board specific. BRANCH=gru,reef BUG=b:35580805 TEST=built a reef image, observed that in case cr50 image is updated, after the next reboot the AP stops booting before loading depthcharge, reports upcoming reset and waits for it. Once the system is booted after that, the new event can be found in the log: localhost ~ # mosys eventlog list ... 7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode 8 | 2017-03-23 18:42:13 | Unknown | 0xac 9 | 2017-03-23 18:42:21 | System boot | 46 ... Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09elog: Add all EC event codesFurquan Shaikh
Add the missing EC event codes in elog.h and correct the event code value for RECOVERY_HWREINIT. Change-Id: If9fb319cce1e4acce4b3d7c3a39365986856a9b4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18693 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-07elog: Fix duplicate event typeDuncan Laurie
The current elog implementation has two event types defined for 0xa7, apparently the result of divergent coreboot trees on chromium where some events were added to ARM systems but not upstreamed until later. Fix this by moving ELOG_TYPE_THERM_TRIP to be 0xab, since the current elog parsing code in chromium is using ELOG_TYPE_SLEEP for 0xa7. BUG=b:35977516 TEST=check for proper "CPU Thermal Trip" event when investigating a device that is unexpectedly powering down. Change-Id: Idfa9b2322527803097f4f19f7930ccbdf2eccf35 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18579 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/common: Add save/restore for variable MRC dataAndrey Petrov
Piggy-back on existing MRC cache infrastructure to store variable MRC data. Only one set of data can be valid at given point of time. Currently this magically happens because region alignment is forced to 0x1000 and region itself is of the same size. This needs to be somehow programmatically enforced. Change-Id: I8a660d356ca760b8ff9907396fb9b34cb16cf1db Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17320 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14elog: Update event log IDs for EC eventsFurquan Shaikh
BUG=chrome-os-partner:59352 BRANCH=None TEST=Compiles successfully Change-Id: Idf2d377bf4709ea25616adfbde55f39798c0cd39 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17393 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mrc: Add support for separate training cache in recovery modeFurquan Shaikh
1. Re-factor MRC cache driver to properly select RW_MRC_CACHE or RECOVERY_MRC_CACHE based on the boot mode. - If normal mode boot, use RW_MRC_CACHE, if available. - If recovery mode boot: - Retrain memory if RECOVERY_MRC_CACHE not present, or recovery is requested explicity with retrain memory request. - Use RECOVERY_MRC_CACHE otherwise. 2. Protect RW and RECOVERY mrc caches in recovery and non-recovery boot modes. Check if both are present under one unified region and protect that region as a whole. Else try protecting individual regions. 3. Update training data in appropriate cache: - Use RW_MRC_CACHE if normal mode. - Use RECOVERY_MRC_CACHE if present in recovery mode. Else use RW_MRC_CACHE. 4. Add proper debug logs to indicate which training data cache is used at any point. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified that correct cache is used in both normal and recovery mode on reef. Change-Id: Ie79737a1450bd1ff71543e44a5a3e16950e70fb3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17242 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-06soc/intel/common: log event when MRC cache is updatedAaron Durbin
Log when the MRC cache is attempted to be updated with status of success or failure. Just one slot is supported currently which is deemed 'normal'. This is because there are more slots anticipated in the future. BUG=chrome-os-partner:59395 Change-Id: I0f81458325697aff9924cc359a4173e0d35da5da Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17231 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-06elog: add sources to reflect full event type namespace usageAaron Durbin
Some events were added in other places, but coreboot's elog namespace wasn't updated. As such there's a collision with the thermtrip event. This change at least updates the elog information to reflect potential event type uage. BUG=chrome-os-partner:59395 Change-Id: Ib82e2b65ef7d34e260b7d7450174aee7537b69f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17230 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-06elog: fix default elog_add_event_raw() declarationAaron Durbin
When CONFIG_ELOG isn't used default empty inline functions are provided, however the elog_add_event_raw() had the wrong type signature. Fix that. BUG=chrome-os-partner:59395 Change-Id: Iaee68440bbafc1e91c88a7b03e283fc3e72de0a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17232 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: provide return status for all operationsAaron Durbin
Instead of relying on global state to determine if an error occurred provide the ability to know if an add or shrink operation is successful. Now the call chains report the error back up the stack and out to the callers. BUG=chrome-os-partner:55932 Change-Id: Id4ed4d93e331f1bf16e038df69ef067446d00102 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16104 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-02elog: Include declarations for boot count functions unconditionallyFurquan Shaikh
There is no need to add guards around boot_count_* functions since the static definition of boot_count_read is anyways unused. BUG=chrome-os-partner:55473 Change-Id: I553277cdc09a8af420ecf7caefcb59bc3dcb28f1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15997 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-25soc/intel/common: Add common smihandler codeHannah Williams
Provide default handler for some SMI events. Provide the framework for extracting data from SMM Save State area for processors with SMM revision 30100 and 30101. The SOC specific code should initialize southbridge_smi with event handlers. For SMM Save state handling, SOC code should implement get_smm_save_state_ops which initializes the SOC specific ops for SMM Save State handling. Change-Id: I0aefb6dbb2b1cac5961f9e43f4752b5929235df3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-12-30nyan*: Add an empty elog functions for the !CONFIG_ELOG caseDavid Hendricks
Provide elog stub functions so eventlog support can be omitted without littering code with "#if CONFIG_ELOG". This makes it so coreboot can be built without eventlog support for these platforms for debugging purposes. BUG=none BRANCH=none TEST=compiled for Nyan and Rambi with CONFIG_ELOG unset Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Ibf56d29a09234068773378f99ad9bffd5480dc9c Original-Reviewed-on: https://chromium-review.googlesource.com/198647 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 8e83dd460647972c4f46c19f8dc3d3ad7baeb550) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3c0803ceb7a1c06da717416c42b6b7730c029ed0 Reviewed-on: http://review.coreboot.org/7901 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-17elog: Do not attempt to init SPIDavid Hendricks
This severs a dependency the eventlog code has on initializing chipset/SoC SPI controller. Currently elog_init() calls spi_init() as a catch-all. This worked for x86 since the SPI controller is only used for one thing on existing platforms. As we add eventlogging support to non-x86 platforms we need to consider the more generalized case where the assumptions about how SPI works on x86 are no longer valid. BUG=none BRANCH=none Signed-off-by: David Hendricks <dhendrix@chromium.org> TEST=built and booted on Link, Beltino and Rambi. See below for "mosys eventlog list" output on Link showing boot and suspend/resume events (including lid close/open) added successfully. localhost ~ # mosys eventlog list 0 | 2014-04-14 13:52:44 | Log area cleared | 4096 1 | 2014-04-14 13:52:44 | System boot | 50 2 | 2014-04-14 13:52:44 | EC Event | Power Button 3 | 2014-04-14 13:52:44 | SUS Power Fail 4 | 2014-04-14 13:52:44 | System Reset 5 | 2014-04-14 13:52:44 | ACPI Wake | S5 6 | 2014-04-14 13:53:25 | ACPI Enter | S3 7 | 2014-04-14 13:53:35 | ACPI Wake | S3 8 | 2014-04-14 13:53:35 | Wake Source | RTC Alarm | 0 9 | 2014-04-14 13:53:49 | ACPI Enter | S3 10 | 2014-04-14 13:54:00 | EC Event | Lid Open 11 | 2014-04-14 13:54:00 | ACPI Wake | S3 12 | 2014-04-14 13:54:00 | Wake Source | GPIO | 15 Original-Change-Id: I26e25c0a856f7b8db5ab6b8e7e1acae291d2eadc Original-Reviewed-on: https://chromium-review.googlesource.com/194526 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 2971d20b6ebdd9803b05ccbbaeefe1bde1a21af4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia5f2913fd8e4fee6e741e6d1e39d32bb86525cb3 Reviewed-on: http://review.coreboot.org/7831 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-02elog: Add event type for CPU thermal tripDuncan Laurie
There is a status bit for this event in most intel chipsets that we can read and report. Start by adding the new event type. Change-Id: Ib06411e3b87a1d069fb469943dd445bee6c1291f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/199370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 386a06170ec5afb31d0fe93ace3afbaab897a598) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7004 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-20drivers/elog: Fix implicit function declaration issueEdward O'Callaghan
Fix compilation. Relying on the pre-processor to condition an if statement will lead to warnings of implicitly defined functions. To solve this dilemma add symbols to resolve to at compile time. Change-Id: Id0117528c5579cc1dec750a8a17a76fab4314b3f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5504 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Extend CMOS POST code logging to store extra dataDuncan Laurie
This can be used to indicate sub-state within a POST code range which can assist in debugging BIOS hangs. For example this can be used to indicate which device is about to be initialized so if the system hangs while talking to that device it can be identified. Change-Id: I2f8155155f09fe9e242ebb7204f0b5cba3a1fa1e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58104 Reviewed-on: http://review.coreboot.org/4229 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Extend the ELOG errors for EC fan.Marc Jones
Change-Id: Ida98f81b1ac1f6b3ba16c0b98e5c64756606fd58 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/48318 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4126 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-25butterfly: Log EC shutdown reason in ELOGDuncan Laurie
The EC saves its last "shutdown reason" for the system in EC RAM that we can read back and log on boot. The decode for the "reason" field will be added to mosys. Change-Id: I834d39122e45262ef8e7ba59201accbee5857aac Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48323 Reviewed-by: David James <davidjames@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4127 Tested-by: build bot (Jenkins)
2013-03-21lynxpoint: Fix ELOG logging of power management eventsDuncan Laurie
This is updated to handle LynxPoint-H and LynxPoint-LP and a new wake event is added for the power button. Boot, suspend/resume, reboot, etc on WTM2 and then check the event log to see if expected events have been added. Change-Id: I15cbc3901d81f4fd77cc04de37ff5fa048f9d3e8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2817 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09ELOG: Add EC events to elog headerDuncan Laurie
These events were initially for Chrome EC but they can be applied to any EC. Change-Id: I0eba9dbe8bde506e7f9ce18c7793399d40e6ab3b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1746 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08elog: add extended management engine eventDuncan Laurie
We are seeing ME disabled and ME error events on some devices and this extended info can help with debug. Also fix a potential issue where if the log does manage to get completely full it will never try to shrink it because the only call to shrink the log happens after a successful event write. Add a check at elog init time to shrink the log size. Change-Id: Ib81dc231f6a004b341900374e6c07962cc292031 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-07EC: Prepare to read and log last post code from previous bootDuncan Laurie
(elog portion, support in EC code pending) - Use a new EC command to read the last post code from the previous boot - If the post code is not well-known final boot or resume code then log it Change-Id: Id6249e9a182243eb87c777edd56f48de72125e77 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1703 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-07-26ELOG: Fix reporting of developer/recovery modesDuncan Laurie
Recent changes in EC/Vboot/U-boot have completely broken the logging of developer and recovery modes. Recovery mode may not be in VBNV, so if that is zero and yet we are in recovery mode then assume it is there because the button/key was pressed. Since there may not be any actual developer mode switch we look if option rom is loaded and the system is not in recovery mode and consider that as developer mode. Change-Id: I70104877b24de477217e1ff5b3a019aef22343ec Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Log event for abnormal management engine statusDuncan Laurie
This will log if the ME is disabled or has an error. 1) disable ME via EC console: gpioset PCH_HDA_SDO 1 2) boot the device 3) read eventlog with "mosys eventlog list" 71 | 2012-07-13 10:10:55 | Management Engine | Disabled Change-Id: I9f6ee452d2aea76e6a5ea2cd50a50ff36245692a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1345 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26ELOG: Add support for SMM and kernel GSMI driverDuncan Laurie
The linux kernel contains an SMI driver that was written by me (Duncan) and upstreamed a couple years ago called GSMI. This driver will format a parameter buffer and pass pointers to this parameter buffer to the SMI handler. It uses this to generate events for kernel shutdown reasons: Clean, Panic, Oops, etc. This function expects to be passed pointers into the SMM state save area that correspond to the prameter buffer and the return code, which are typically EAX and EBX. The format of the parameter buffer is defined in the kernel driver so we implement the same interface here in order to be compatible. GSMI_CMD_HANDSHAKE: this is an early call that it does to try and detect what kind of BIOS is running. GSMI_CMD_SET_EVENT_LOG: this contains a parameter buffer that has event type and data. The kernel-specific events are translated here and raw events are passed through as well which allows any run-time event to be added for testing. GSMI_CMD_CLEAR_EVENT_LOG: this command clears the event log. First the gsmi driver must be enabled in the kernel with CONFIG_GOOGLE_GSMI and then events can be added via sysfs and events are automatically generated for various kernel shutdown reasons. These can be seen in the event log as the 'Kernel Event' type: 169 | 2012-06-23 15:03:04 | Kernl Event | Clean Shutdown 181 | 2012-06-23 16:26:32 | Kernl Event | Oops 181 | 2012-06-23 16:26:32 | Kernl Event | Panic Change-Id: Ic0a3916401f0d9811e4aa8b2c560657dccc920c1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1316 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25ELOG: Add support for a monotonic boot counter in CMOSDuncan Laurie
This maintains a 32bit monotonically increasing boot counter that is stored in CMOS and logged on every non-S3 boot when the event log is initialized. In CMOS the count is prefixed with a 16bit signature and appended with a 16bit checksum. This counter is incremented in sandybridge early_init which is called by romstage. It is incremented early in order notice when reboots happen after memory init. The counter is then logged when ELOG is initialized and will store the boot count as part of a 'System boot; event. Reboot a few times and look for 'System boot' events in the event log and check that they are increasing. Also verify that the counter does NOT increase when resuming from S3. 171 | 2012-06-23 16:02:55 | System boot | 285 176 | 2012-06-23 16:26:00 | System boot | 286 182 | 2012-06-23 16:27:04 | System boot | 287 189 | 2012-06-23 16:31:10 | System boot | 288 Change-Id: I23faeafcf155edfd10aa6882598b3883575f8a33 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1315 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25ELOG: Add support for generating SMBIOS type15 tableDuncan Laurie
This standared SMBIOS 0able describes the location and format of the event log to the OS and applications. In this case the pointer is a 32bit physical address pointer to the log in memory mapped flash. Look for SMBIOS type15 entry with 'dmidecode -t 15' Handle 0x0004, DMI type 15, 23 bytes System Event Log Area Length: 4095 bytes Header Start Offset: 0x0000 Header Length: 8 bytes Data Start Offset: 0x0008 Access Method: Memory-mapped physical 32-bit address Access Address: 0xFFB6F000 Status: Valid, Not Full Change Token: 0x00000000 Header Format: OEM-specific Supported Log Type Descriptors: 0 Change-Id: I1e7729e604000f197e26e69991a2867e869197a6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1314 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24ELOG: Add support for flash based event logDuncan Laurie
This is based around the SMBIOS event log specification but expanded with OEM event types to support more specific and relevant system events. It requires flash storage and a minimum 4K block (or flash block size) that should be allocated in the FMAP. A copy of the event log is maintained in memory for convenience and speed and the in-memory copy is written to flash at specific points. The log is automatically shunk when it reaches a configurable full threshold in order to not get stuck with a full log that needs OS help to clear. ELOG implements the specification published here: http://code.google.com/p/firmware-event-log/wiki/FirmwareEventLogDesign And is similar to what we use in other firmware at Google. This implementation does not support double-buffered flash regions. This is done because speed is valued over the log reliability and it keeps the code simpler for the first version. This is a large commit and by itself it just provides a new driver that is made available to coreboot. Without additional patches it is not very useful, but the end result is an event log that will contain entries like this: 171 | 2012-06-23 16:02:55 | System boot | 285 172 | 2012-06-23 16:02:55 | EC Event | Power Button 173 | 2012-06-23 16:02:55 | SUS Power Fail 174 | 2012-06-23 16:02:55 | System Reset 175 | 2012-06-23 16:02:55 | ACPI Wake | S5 Change-Id: I985524c67f525c8a268eccbd856c1a4c2a426889 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1311 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:08:01 +0000