summaryrefslogtreecommitdiff
path: root/src/include/device
AgeCommit message (Collapse)Author
2017-06-27include/device: Add pci ids for Intel CNLLijian Zhao
Change-Id: Ia76c391e04e1e11bd110764902b91ef4ed5e8490 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-22device/dram/ddr3.h: Add brackets around macroArthur Heymans
This fixes improper dram frequency being displayed in sandy bridge native raminit. Change-Id: I1fe4e4331f45ce1c21113c039b8433252326293d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-16haswell: add CBMEM_MEMINFO table when initing RAMMatt DeVillier
Populate a memory_info struct with PEI and SPD data, in order to inject the CBMEM_INFO table necessary to populate a type17 SMBIOS table. On Broadwell, this is done by the MRC binary, but the older Haswell MRC binary doesn't populate the pei_data struct with all the info needed, so we have to pull it from the SPD. Some values are hardcoded based on platform specifications. Change-Id: Iea837d23f2c9c1c943e0db28cf81b265f054e9d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-12nb/intel/sandybridge: Improve CAS freq selectionArthur Heymans
The previous code seemed weird and tried to check if its selected value is supported three times. This also lower the clock if a selected frequency does not result in a supported CAS number. Change-Id: I97244bc3940813c5a5fcbd770d71cca76d21fcae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-06-09device/dram/ddr2.c: Fix is_registered_ddr2Arthur Heymans
Type 0x10 is mini RDIMM according to JEDEC DDR2 SPD specifications. Change-Id: I6d35bd74961326ebd9225f044313b107aca24bda Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-02device/device_util: Add function to determine bridge statePatrick Rudolph
Add a method to get the state of a bridge device. Return true if at least one enabled device on the secondary bus is found. Useful to disable non hotplugable bridges without any devices attached. Change-Id: Ic8fe539d233031d4d177b03dd2c03edb5ab8c88d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-01src/include/device: Add System Agent (SA) device idsSubrata Banik
Change-Id: Iddc9f8187d1ff4a51bf3bf42a266b79007c42f3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01include/device: Add pci ids for Intel SDBora Guvendik
Change-Id: Iee966991ffd0f73cee9520c85eeba6530e224457 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-22include/device: Add pci ids for Intel GLKHannah Williams
Change-Id: Ifbca20a0c38cc1fb8ee4b4e336d59e834fcaf57a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19686 Reviewed-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-13src/include/device: Add PCIe root ports device idsAamir Bohra
Change-Id: Ic2df7fb1e4a3d3c52561b949c4b359ea59824387 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19664 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-10drivers/storage: Make DRVR_CAP_8BIT controller independentLee Leahy
Promote DRVR_CAP_8BIT from controller specific to controller independent TEST=Build and run on Galileo Gen2 Change-Id: I51e4c990d3941a9f31915a5703095f92309760f1 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-10drivers/storage: Remove set_control_regLee Leahy
Remove unused field in generic SD/MMC controller data structure. TEST=Build and run on Galileo Gen2 Change-Id: I7169dca07509a6f2513d62b593742daf764010b2 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05pci_device: add PCI device IDs for Intel platformsRizwan Qureshi
Add host of PCI device Ids for IPs in Intel platforms. Change-Id: I0eee9409df3e6dc326b60bc82c2b715c70e7debd Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25drivers/storage: Add SD/MMC/eMMC driver based upon depthchargeLee Leahy
The SD/MMC support is broken into several pieces. There are three main data structures: * sdhci_ctrlr - This is SDHCI controller specific and defined in include/device/sdhci.h * sd_mmc_ctrlr - This contains generic controller management data and defined in include/device/sd_mmc_ctrlr.h * storage_media - This contains the flash storage device management data and is defined in include/device/storage.h The SD/MMC driver consists of several components: * SDHCI controller code * bouncebuf.c * bouncebuf.h * pci_sdhci.c * sdhci.c * sdhci.h * sdhci_adma.c * sdhci_display.c * Flash storage device support * mmc.c * mmc.h * sd.c * sd_mmc.c * sd_mmc.h * storage.c * storage.h * storage_erase.c * storage_write.c Kconfig values enable various portions of the controller and storage drivers to be built to reduce the overall size of what is included in the final image. Full read/write/erase operations are provided for those platforms which want to take advantage. It is also possible to build the driver to perform initialization only. By default, this driver is not included in any platform, platforms must specifically select DRIVERS_STORAGE to add the SD/MMC support. After this patch is reviewed and merged, there are some additional patches: * Common CAR storage area - Use a predefined region of CAR to pass data structures between bootblock through to romstage. This allows early stages to preform the SD/MMC device initialization and later stages to use the SD/MMC device without further initialization. The example code initializes the SD/MMC device in bootblock and uses the SD/MMC device in romstage without further initialization. * CBMEM ID - Add a CBMEM ID value for the data structures so that they may be passed from romstage to ramstage and eventually the payload. The example uses the SD/MMC device in ramstage without further initialization. * Move the SD/MMC driver into commonlib * Have libpayload build the SD/MMC driver from commonlib. The intent is to pass the controller state to libpayload so that the SD/MMC device can be used without further initialization. * On some platforms, have depthcharge use the commonlib SD/MMC driver History: Copy the SD/MMC driver from depthcharge revision eb583fa8 into coreboot and make the following changes: * Removed #include "config.h" from mmc.c, allow the lint tests to pass. * Move include files from drivers/storage into include/device. * Rename mmc.h to storage.h. * Add the Kconfig and Makefile and make edits to get the code to build. * Add support to initialize a PCI controller. * Fix formatting issues detected by checkpatch. * Fix data flow issues detected by checkpatch. * Add the missing voltage (MMC_VDD_35_36) into the voltage mask. * Rename the macros mmc_debug, mmc_trace and mmc_error to sd_mmc_*. * Replace printf with sd_mmc_error. * Add sdhc_debug, sdhc_trace and sd_error macros. * Add Kconfig values to enable storage device debugging and tracing. * Add tracing and debug support to the SDHCI driver. * Allow SOC to override more controller features. * Split out ADMA support. * Move 1V8 support into SOC routine. * Move HS400 support into SOC routine. * Rework clock handling. * Change all controller references to use ctrlr. * Update the voltage handling. * Update modes of operation. * Move DMA fields into MmcCtrlr. * Update bus width support. * Change MMC_TIMING_* to BUS_TIMING_*. * Rename MMC_MODE_ to DRVR_CAP. * Move quirks into ctrlr->caps. * Associate removeable with the controller. * Statically allocate MmcMedia. * Replace the SdhciHost structure with the MmcCtrlr structure. * Split the code to support other SD/MMC controllers. * Split out erase and write support. * Update the code to be more consistent with the coreboot coding style. * Only expose calling APIs. * Divide up mmc.c into 4 modules: MMC, SD, storage card, common code. * Update debug and error messages. * Add partition support. * Display clock frequencies once in MHz. * Remove mmc_send_cmd, use ctrlr->send_cmd instead. * Handle error from sd_send_op_cond. * Allow mainboard to control delays around CMD 0. * Support command logging. * Mainboard may set delay after SD/MMC command. * Display serial number with sd_mmc_trace. * Remove cmd set parameter from mmc_switch. * Display errors for timeout and comm errors. * Add LED support. * Move 64bit DMA flag into ctrlr->caps. * Rework PIO transfer routine. * Add HS200 bus tuning. * Add support for HS400. * Use same format for HS400, HS200 and HS52. * Reduce storage_media structure size * Add routine to update code pointers * Add display of storage setup * Display controller setup TEST=Build and run on Reef and Galileo Gen2 Change-Id: I9b5f9db1e27833e4ce4a97ad4f5ef3a46f64f2a2 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19208 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-03-13src/include: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters Changed a few comments to reduce line length. File src/include/cpu/amd/vr.h was skipped. TEST=Build and run on Galileo Gen2 Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18687 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13src/include: Remove use of binary constantsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Avoid gcc v4.3+ binary constant extension: <...> TEST=Build and run on Galileo Gen2 Change-Id: Iab29c494060df3f60eff5317259e0fdbfea06f27 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18685 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13src/include: Remove space between function name and parametersLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Unnecessary space before function pointer arguments TEST=Build and run on Galileo Gen2 Change-Id: I2b56af20d5f74cc2625d3cb357fbb137bd440af0 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18660 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13src/include: Remove space after function nameLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: space prohibited between function name and open parenthesis '(' TEST=Build and run on Galileo Gen2 Change-Id: I0ac30b32bab895ca72f91720eeae5a5067327247 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18656 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13src/include: Fix space between type, * and variable nameLee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: "foo * bar" should be "foo *bar" ERROR: "foo* bar" should be "foo *bar" ERROR: "foo*bar" should be "foo *bar" TEST=Build and run on Galileo Gen2 Change-Id: I5a3ff8b92e3ceecb4ddf45d8840454d5310fc6b3 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18655 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2017-03-12src/include: Remove braces for single statementsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: braces {} are not necessary for single statement blocks TEST=Build and run on Galileo Gen2 Change-Id: I00b59f6a27c3acb393deaa763596363b7e958efd Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18654 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-12src/include: Open brace on same line as enum or structLee Leahy
Fix the following errors and warning detected by checkpatch.pl: ERROR: open brace '{' following enum go on the same line ERROR: open brace '{' following struct go on the same line ERROR: that open brace { should be on the previous line WARNING: missing space after struct definition TEST=Build and run on Galileo Gen2 Change-Id: I856235d0cc3a3e59376df52561b17b872b3416b2 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18653 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-12src/include: Remove spaces before tabsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: please, no space before tabs TEST=Build and run on Galileo Gen2 Change-Id: If60a58021d595289722d1d6064bea37b0b0bc039 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18652 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-12src/include: Remove spaces before ( and after )Lee Leahy
Fix the following error messages found by checkpatch.pl: ERROR: space prohibited after that open parenthesis '(' ERROR: space prohibited before that close parenthesis ')' TEST=Build and run on Galileo Gen2 Change-Id: I2a9a0df640c51ff3efa83dde852dd6ff37ac3c06 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18651 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-10src/include: Add parenthesis around macrosLee Leahy
Fix the following error found by checkpatch.pl: ERROR: Macros with complex values should be enclosed in parentheses False positives are detected for attribute macros. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define BOOT_STATE_INIT_ATTR __attribute__ ((used, section (".bs_init"))) False positive also generated for macros for linker script files. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define CBFS_CACHE(addr, size) \ + REGION(cbfs_cache, addr, size, 4) \ + ALIAS_REGION(cbfs_cache, preram_cbfs_cache) \ + ALIAS_REGION(cbfs_cache, postram_cbfs_cache) False positives generated for assembly code macros. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define DECLARE_OPTIONAL_REGION(name) asm (".weak _" #name ", _e" #name ) False positive detected when macro includes multiple comma separated values. The following code is from src/include/device/azalia_device.h: #define AZALIA_SUBVENDOR(codec, val) \ (((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)), \ (((codec) << 28) | (0x01721 << 8) | (((val) >> 8) & 0xff)), \ (((codec) << 28) | (0x01722 << 8) | (((val) >> 16) & 0xff)), \ (((codec) << 28) | (0x01723 << 8) | (((val) >> 24) & 0xff)) TEST=Build and run on Galileo Gen2 Change-Id: I6e3b6950738e6906851a172ba3a22e3d5af1e35d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18649 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-10device/dram/ddr2: Add common ddr2 spd decoderPatrick Rudolph
Decode DDR2 SPD similar to DDR3 SPD decoder to ease readability, reduce code complexity and reduce size of maintainable code. Rename dimm_is_registered to spd_dimm_is_registered_ddr3 to avoid compilation errors. Change-Id: I741f0e61ab23e3999ae9e31f57228ba034c2509e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18273 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-03-09src/include: Add space after commaLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) TEST=Build and run on Galileo Gen2 Change-Id: I297bfc3d03dc95b471d3bb4b13803e81963841b5 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18647 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Indent code using tabsLee Leahy
Fix the following error and warning detected by checkpatch.pl: ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line TEST=Build and run on Galileo Gen2 Change-Id: I487771b8f4d7e104457116b772cd32df5cd721a6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18646 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-09src/include: Fix unsigned warningsLee Leahy
Fix warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' BRANCH=none BUG=None TEST=Build and run on Galileo Gen2 Change-Id: I23d9b4b715aa74acc387db8fb8d3c73bd5cabfaa Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18607 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-16device: Add scan_generic_bus supportFurquan Shaikh
scan_smbus routine does not perform any smbus specific operation. Thus, rename the routine to scan_generic_bus so that it can be used by other buses like SPI. Add a wrapper scan_smbus to allow other users of smbus scan to continue working as before. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I8ca1a2b7f2906d186ec39e9223ce18b8a1f27196 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18363 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-16device: Add a new "SPI" device typeFurquan Shaikh
Add support for a new "SPI" device type in the devicetree to bind a device on the SPI bus. Allow device to provide chip select number for the device as a parameter. Add spi_bus_operations with operation dev_to_bus which allows SoCs to define a translation method for converting "struct device" into a unique SPI bus number. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18340 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-02-06devtree: Drop unused parameter show_devs_tree() callKyösti Mälkki
Change-Id: I14c044bb32713ef4133bce8a8238a2bc200c4959 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18085 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-04x86/acpi: Add VFCT tablePatrick Rudolph
Add VFCT table to provide PCI Optiom Rom for AMD graphic devices. Useful for GNU Linux payloads and embedded dual GPU systems. Tested on Lenovo T500 with AMD RV635 as secondary gpu. Original Change-Id: I3b4a587c71e7165338cad3aca77ed5afa085a63c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422 Reviewed-on: https://review.coreboot.org/18192 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-07src/device: Get device structure by path typeSubrata Banik
Add helper function to find a device by path type in the device tree. Change-Id: I8846f63bd2488788ea3c7ab5154e7cf431a252bc Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Dhaval V Sharma <dhaval.v.sharma@intel.com> Reviewed-on: https://review.coreboot.org/17731 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Remove pci_mmio_xx() in ramstageKyösti Mälkki
MMCONF operations are already the default so these would never be used. Change-Id: I671f3d2847742e400bc4ecfccc088e3b79d43070 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17691 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23AGESA binaryPI: Fix PCI ID namespaceKyösti Mälkki
The defines of device IDs reflects the vendor namespace the ID has been allocated from. Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17510 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-23include/device/early_smbus.h: Declare smbus write functionNaresh G Solanki
Add declaration for smbus write. Early smbus access also needs smbus write function specially to read spd for DDR4 wherein page has to be switched by smbus write. Change-Id: I246cbdf0b52923f01dd036f63df17bf9af043c9f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20device/dram/ddr3: Calculate CRC16 of SPD unique identifierKyösti Mälkki
Specification allows for the unique identifier bytes 117..125 to be excluded of CRC calculation. For such SPD, the CRC would not identify replacement between two identical DIMM parts, while memory training needs to be redone. Change-Id: I8e830018b15c344d9f72f921ab84893f633f7654 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17486 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-16include/device/pci_ids.h: Correct Entertainment sub-classElyes HAOUAS
According to PCI LOCAL BUS SPECIFICATION, REV. 3.0 page 305, the sub-class for Entertainment en/decryption is 0x1010 Change-Id: Ia069e2ec328a8180fc1e2e70146c3710e703ee59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17436 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-07pci_ids.h: Correct recent AMD ID namesMarshall Dawson
Adjust the names to match AMD's convention for family and model. This patch is relevant for: Trinity & Richland: Family 15h Models 00h-0Fh Carrizo: Family 15h Models 60h-6Fh Mullins & Steppe Eagle: Family 16h Models 30h-3Fh Change-Id: I613b84ed438fb70269d789c9901f1928b5500757 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17169 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com>
2016-11-02pci_ids.h: Add ID for amd/00670F00 northbridgeMarshall Dawson
Add the D18F0 device ID for the Stoney APU. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit c0fd7f70527c273bcbdce5655a21ca4de4854428) Change-Id: Ib599fc6119a3cef53f4f179c2fcd0e45905d81a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04device/pci.h: change #ifdef argument to __SIMPLE_DEVICE__Antonello Dettori
Change the argument to #ifdef from __PRE_RAM__ to __SIMPLE_DEVICE__ in order to account for the coreboot stages that do not define device_t and are not __PRE_RAM__ (i.e. smm) device_t Change-Id: Ic6e9b504803622b60b5217c9432ce57caefc5065 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16369 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-24SPD: fix DDR3 SDRAM memory module typesElyes HAOUAS
Correct the definitions for 16b and 32b SO-DIMM modules. Regarding JEDEC Standard No. 21-C Annex K: Serial Presence Detect for DDR3 SDRAM Modules (2014), the hex values used for 16b-SO-DIMM is 0x0c and for 32b-SO-DIMM module type is 0x0d Change-Id: I9210ac3409a4aaf55a0f6411d5960cfdca05068d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15262 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-06-20include/device/dram/ddr3: Add additional frequenciesPatrick Rudolph
IvyBridge memory controller supports more frequencies than SandyBridge. Required for future patches. Change-Id: I0bcb670c20407ec0aec20bae85c4cbe6ccc44b16 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15182 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-06-09device: i2c: Add support for I2C bus operationsDuncan Laurie
In order to support doing bus operations on an I2C device that is described in the devicetree there needs to be some linkage of the device and the existing opaque I2C controller bus number. This is provided in a similar fashion to the existing SMBUS operations but modified to fit within the existing I2C infrastructure. Variants of the existing I2C helper functions are provided that will obtain the bus number that corresponds to this device by looking for the SOC-provided I2C bus operation structure to provide a function that will make that translation. For example an SOC using a PCI I2C controller at 0:15.0 could use: soc/intel/.../i2c.c: static int i2c_dev_to_bus(struct device *dev) { if (dev->path.pci.devfn == PCI_DEVFN(0x15, 0)) return 0; return -1; } static struct i2c_bus_operation i2c_bus_ops = { .dev_to_bus = &i2c_dev_to_bus } static struct device_operations i2c_dev_ops = { .ops_i2c_bus = &i2c_bus_ops ... } With an I2C device on that bus at address 0x1a described in the tree: devicetree.cb: device pci 15.0 on # I2C0 chip drivers/i2c/sample device i2c 1a.0 on end end end That driver can then do I2C transactions with the device object without needing to know that the SOC-specific bus number that this I2C device lives on is "0". For example it could read a version value from register address 0 with a byte transaction: drivers/i2c/sample/sample.c: static void i2c_sample_enable(struct device *dev) { uint8_t ver; if (!i2c_dev_readb(dev, 0x00, &ver)) printk(BIOS_INFO, "I2C %s version 0x02x\n", dev_path(dev), ver); } Change-Id: I6c41c8e0d10caabe01cc41da96382074de40e91e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15100 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI I2C descriptorsDuncan Laurie
Add required definitions to describe an ACPI I2C bus and a method to write the I2cSerialBus() descriptor to the SSDT. This will be used by device drivers to describe their I2C resources to the OS. The devicetree i2c device can supply the address and 7 or 10 bit mode as well as indicate the GPIO controller device, and the bus speed can be fixed or configured by the driver. chip.h: struct drivers_i2c_generic_config { enum i2c_speed bus_speed; }; generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_i2c_generic_config *config = dev->chip_info; struct acpi_i2c i2c = { .address = dev->path->i2c.device, .mode_10bit = dev->path.i2c.mode_10bit, .speed = config->bus_speed ? : I2C_SPEED_FAST, .resource = acpi_device_path(dev->bus->dev) }; ... acpi_device_write_i2c(&i2c); ... } devicetree.cb: device pci 15.0 on chip drivers/i2c/generic device i2c 10.0 on end end end SSDT.dsl: I2cSerialBus (0x10, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.PCI0.I2C0", 0, ResourceConsumer) Change-Id: I598401ac81a92c72f19da0271af1e218580a6c49 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14935 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-21device: Add an ACPI device name and path concept to devicesDuncan Laurie
Add a function to "struct device_operations" to return the ACPI name for the device, and helper functions to find this name (either from the device or its parent) and to build a fully qualified ACPI path from the root device. This addition will allow device drivers to generate their ACPI AML in the SSDT at boot, with customization supplied by devicetree.cb, instead of needing custom DSDT ASL for every mainboard. The root device acpi_name is defined as "\\_SB" and is used to start the path when building a fully qualified name. This requires SOC support to provide handlers for returning the ACPI name for devices that it owns, and those names must match the objects declared in the DSDT. The handler can be done either in each device driver or with a global handler for the entire SOC. Simplified example of how this can be used for an i2c device declared in devicetree.cb with: chip soc/intel/skylake # "\_SB" (from root device) device domain 0 on # "PCI0" device pci 19.2 on # "I2C4" chip drivers/i2c/test0 device i2c 1a.0 on end # "TST0" end end end end And basic SSDT generating code in the device driver: acpigen_write_scope(acpi_device_scope(dev)); acpigen_write_device(acpi_device_name(dev)); acpigen_write_string("_HID", "TEST0000"); acpigen_write_byte("_UID", 0); acpigen_pop_len(); /* device */ acpigen_pop_len(); /* scope */ Will produce this ACPI code: Scope (\_SB.PCI0.I2C4) { Device (TST0) { Name (_HID, "TEST0000") Name (_UID, 0) } } Change-Id: Ie149595aeab96266fa5f006e7934339f0119ac54 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14840 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-16sconfig: Add a new generic device typeDuncan Laurie
Add support for a basic generic device in the devicetree to bind to a device that does not have a specific bus, but may need to be described in tables for the operating system. For instance some chips may have various GPIO connections that need described but do not fall under any other device. In order to support this export the basic 'scan_static_bus()' that can be used in a device_operations->scan_bus() method to scan for the generic devices. It has been possible to get a semi-generic device by using a fake PNP device, but that isn't really appropriate for many devices. Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid everything being rewritten. Clean up the local paths that leak into the generated configs. Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14789 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-16sconfig: Add 10bit addressing mode to i2c device typeDuncan Laurie
Use the second token for an i2c device entry in devicetree.cb to indicate if it should use 10-bit addressing or 7-bit. The default if not provided is to use 7-bit addressing, but it can be changed to 10-bit addressing with the ".1" suffix. For example: chip drivers/i2c/generic device i2c 3a.1 on end end Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14788 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-21device: Add i2c read/write register field APIYidi Lin
i2c_read_field() - read the value from the specific register field i2c_write_field() - write the value to the specific register field BRANCH=none BUG=none TEST=none Change-Id: I2098715b4583c1936c93b3ff45ec330910964304 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14105 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12device/i2c: Add i2c_read_bytes() APIJitao Shi
Add multi-bytes read support. BRANCH=none BUG=none TEST=saw edid log and dev screen Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306 Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/325211 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13978 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05include/device/dram: Fix DDR3-1866Patrick Rudolph
The PLL multiplier value is off by one for DDR3-1866 due to a wrong TCK value, resulting in DDR3-1600 being used by the PLL. Needs test on real hardware ! Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03src/device/dram/ddr3: Parse additional informationPatrick Rudolph
Parse manufacturer id and ASCII serial. Required for SMBIOS type 17 field. Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13862 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02nb/intel/sandybridge/romstage: Read fuse bits for max MEM ClkPatrick Rudolph
Instead of hardcoding the maximum supported DDR frequency to 800Mhz (DDR3-1600), read the fuse bits that encode this information. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-20nb/intel/sandybridge/raminit: Add XMP supportPatrick Rudolph
Some vendors store lower frequency profiles in the regular SPD, if the SPD contains a XMP profile. To make use of the board's and DIMM's maximum supported DRAM frequency, try to parse the XMP profile and use it instead. Validate the XMP profile to make sure that the installed DIMM count per channel is supported and the requested voltage is supported. To reduce complexity only XMP Profile 1 is read. Allows my DRAM to run at 800Mhz instead of 666Mhz as encoded in the default SPD. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: Ib4dd68debfdcfdce138e813ad5b0e8e2ce3a40b2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13486 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-18device: Add device path display supportLee Leahy
Add an optional routine to translate the device path types into a string for display. TEST=Build and run on Galileo Change-Id: Iea5d0a2430d9a8546105324e2beda0955210dca9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03include/device: Move inline functions from pci_def.h to pci.hAlexandru Gagniuc
pci_def.h is supposed to only contain definitions, such that it may be included in assembly files. Declaration of functions in said file prevents that. Change-Id: I0f90a74291c8a2ef7a1e1027d2d2182f896050fb Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/13300 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-29device/pnp: Ability to set vendor specific logical device configDamien Zammit
According to the PNP ISA v1.0a spec, config registers in the range of 0xf0 up to 0xfe are vendor defined and may be used for any purpose. Config register 0xff is reserved and is defined as such. Currently, only vendor specific registers 0xf0, 0xf1, 0xf4, and 0xfa are able to be set using the PNP_MSCx bit flag masks. This patch adds support for all 15 vendor specific config registers, and updates the existing superio pnp_info to use them where appropriate. Change-Id: Id43b85f74e3192b17dbd7e54c4c6136a2e59ad55 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12808 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-23southbridge/amd/sr5650: Add IOMMU supportTimothy Pearson
Change-Id: I2083d0c5653515c27d4626c62a6499b850f7547b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12044 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-11southbridge/amd/sb700: Add AHCI supportTimothy Pearson
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24drivers/aspeed: Add native text mode VGA support for the AST2050Timothy Pearson
Change-Id: I37763a59d2546cd0c0e57b31fdb7aa77c2c50bee Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11937 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-22allocator: Page align memory mapped PCI resourcesNico Huber
To help hypervisors to assign PCI devices individually to virtualization guests, page align dynamically allocated MMIO resources. Tested with kontron/ktqm77 which has dynamically configured onboard devices on the root bus and secondary buses. Booted Linux and checked the configuration with `lspci -v`. Got the configuration through Muen's tools which are very picky about overlapping and alignment. Booted a Muen based system that uses many onboard devices. GMA, xHCI and one NIC (on a secondary bus) were verified to function properly. Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12111 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-30AMD Bettong: Fix usb device in devicetree for Carrizozbao
Add some missing devices to device tree and header. Remove the obsolete devices. Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11378 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-05symbols: add '_' to pci_drivers and cpu_drivers symbolsAaron Durbin
In order to prepare for more unification of the linker scripts prefix pci_drivers, epci_drivers, cpu_drivers, and ecpu_drivers with an underscore. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built different boards includes ones w/ and w/o relocatable ramstage. Change-Id: I8918b38db3b754332e8d8506b424f3c6b3e06af8 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11506 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-12Change #ifdef and #if defined CONFIG_ bools to #if IS_ENABLED()Martin Roth
Kconfigs symbols of type bool are always defined, and can be tested with the IS_ENABLED() macro. symbol type except string. Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-22AMD Merlin Falcon: Add northbridge files for new AMD processorWANG Siyuan
Tested on Bettong. Windows 7, Windows 8.1 and Ubuntu 14.04 can boot. Change-Id: Ifcbfa0eab74875638a40e74ba2a3bb7c4fb02761 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10419 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-22device: DDR3 generic code 64bit fixStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I5ff309948c36289eedeb8a18030cdd2b4c337690 Reviewed-on: http://review.coreboot.org/10595 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-13Move remap_bsp_lapic to AMD specific codeStefan Reinauer
It's not used outside of very old AMD CPUs. Change-Id: Ide51ef1a526df50d88bf229432d7d36bc777f9eb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10538 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-13southbridge/amd/pi: Add support for new AMD southbridge KernWANG Siyuan
Kern is the southbridge of AMD Merlin Falcon(Carrizo). This add support of HD audio, lpc, sata and usb for Kern. Change-Id: Ie47e38bc1099cdb72002619cb1da269f3739678b Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10418 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10resource: Refactor IORESOURCE flags useKyösti Mälkki
The type of a resource is really an enumeration but our implementation is as a bitmask. Compare all relevant bits and remove the shadowed declarations of IORESOURCE bits. Change-Id: I7f605d72ea702eb4fa6019ca1297f98d240c4f1a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8891 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05AMD K8 fam10: Drop extra HT scan_chain() parametersKyösti Mälkki
Change-Id: Ice7cb89c19585cf725b6f73c33443050f8d65418 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8565 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-05AMD K8 fam10: Refactor HT link connection testKyösti Mälkki
Change-Id: I1e935a6b848a59f7f2e58779bceea599032de9e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8562 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-05devicetree: Add fields for HyperTransport scansKyösti Mälkki
Change-Id: I3b00e5e4e45089fbd7d0d6243d5e441bd8929c0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8557 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
The input/output value max is no longer used for tracking the bus enumeration sequence, everything is handled in the context of devicetree bus objects. Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Single scan_bridges()Kyösti Mälkki
Change-Id: Ifd277992a69a4182e2fac92aaf746abe4fec2a1b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8540 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Refactor PCI bridge register controlKyösti Mälkki
Change-Id: I1766c92abe7a74326c49df74ba38930a502fcb5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8536 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04HyperTransport: Move pci_scan_bus() callKyösti Mälkki
Allows to remove parameter max from the call, it is not involved with the unitid assignment. Change-Id: I087622f4ff69474f0b27cfd8709106ab8ac4ca98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8687 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-14superio: Replace the indexed I/O functionsDave Frodin
Replace the multiple indexed I/O read and write functions with common functions. Change-Id: Idfe7a8784c28d51b3fbcb2f4e26beaa0b91741a8 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10145 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-04-22device: Add class and subclass name supportLee Leahy
Add support to display class and subclass names for PCI devices. BRANCH=none BUG=None TEST=Build and run on strago/cyan. Change-Id: I5136fae45b8a1cd02541f233d29a246cdfcd8331 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c9b0d7201b09a06ea32f0db84187d15f767c80 Original-Change-Id: Ibf2ee89dd84040ca6ab0e52857a69f7ed0c28f37 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/263342 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/9901 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21Unify byte order macros and clrsetbitsJulius Werner
This patch removes quite a bit of code duplication between cpu_to_le32() and clrsetbits_le32() style macros on the different architectures. This also syncs those macros back up to the new write32(a, v) style IO accessor macros that are now used on ARM and ARM64. CQ-DEPEND=CL:254862 BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu, Storm and Urara. Booted on Jerry. Tried to compare binary images... unfortunately something about the new macro notation makes the compiler evaluate it more efficiently (not recalculating the address between the read and the write), so this was of limited value. Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254866 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10PCI - Add interrupt disable bit definitionLee Leahy
BRANCH=none BUG=None TEST=Build Braswell/Strago Change-Id: I11a4c02af3b40edf2252b9e20298941b99f31d21 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 1629d7454a3d4adb8930d14849c41c9a711f4c9a Original-Change-Id: Ie907637f7c823de681ef2e315e803dffc6ad33d3 Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241081 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9487 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23PCIe: Add L1 Sub-State support.Kenji Chen
Enable L1 Sub-State when both root port and endpoint support it. [pg: keyed the feature to MMCONF_SUPPORT, otherwise boards without that capability fail to build.] Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092 Original-BUG=chrome-os-partner:31424 Original-TEST=Build a image and run on Samus proto boards to check if the settings are applied correctly. I just only have proto boards and need someone having EVT boards to confirm the settings. Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a Original-Reviewed-on: https://chromium-review.googlesource.com/221436 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-10AMD Bald Eagle: Add northbridge files for new AMD processorBruce Griffith
Also fix a typo in a config option for SteppeEagle. Change-Id: Iad51cc917217aa0eac751dc805c304652d20e066 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7247 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-09device/pciexp: Add support for PCIe CLK power managementKane Chen
Set PCIe "Enable Clock Power Management", if endpoint supports it. BUG=chrome-os-partner:31424 BRANCH=none TEST=build and boot on rambi, check Enable Clock Power Management in link control register is set properly Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://chromium-review.googlesource.com/220742 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Edit commit message.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8447 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-08device: drop i915 specific headers from resource allocator includesStefan Reinauer
src/include/device/ is the place for include files of the resource allocator. Hence, drop the i915 include file copies and use the ones supplied with the i915 driver instead. The only remaining user of this was the Intel Whitetip Mountain 2 reference board, all other occurences have been previously fixed already. Change-Id: Ib9f72df4e8f847597508971e9dbf671f49019767 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8140 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-01devicetree: Drop dummy root_dev opsKyösti Mälkki
This is just dead code. Should we decide that we want some of these calls made, they would be implemented in the mainboard context. Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8532 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-20AMD K8 fam10: Refactor offset_unitid configurationKyösti Mälkki
Change-Id: I198f2ad321e1a8b6d932f5624b129e312e36a309 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8349 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>