| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Ic2df7fb1e4a3d3c52561b949c4b359ea59824387
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19664
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move drivers/storage into commonlib/storage to enable access by
libpayload and indirectly by payloads.
* Remove SD/MMC specific include files from include/device
* Remove files from drivers/storage
* Add SD/MMC specific include files to commonlib/include
* Add files to commonlib/storage
* Fix header file references
* Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver
* Add Kconfig source for commonlib/storage
* Rename *DEVICE* to *COMMONLIB*
* Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE*
TEST=Build and run on Galileo Gen2
Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Promote DRVR_CAP_8BIT from controller specific to controller independent
TEST=Build and run on Galileo Gen2
Change-Id: I51e4c990d3941a9f31915a5703095f92309760f1
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove unused field in generic SD/MMC controller data structure.
TEST=Build and run on Galileo Gen2
Change-Id: I7169dca07509a6f2513d62b593742daf764010b2
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add host of PCI device Ids for IPs in Intel platforms.
Change-Id: I0eee9409df3e6dc326b60bc82c2b715c70e7debd
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/19541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The devicetree data structures have been available in more than just
ramstage and romstage. In order to provide clearer and consistent
semantics two new macros are provided:
1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE
2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST
The ROMSTAGE_CONST attribute is used in the source code to mark
the devicetree data structures as const in early stages even though
it's not just romstage. Therefore, rename the attribute to
DEVTREE_CONST as that's the actual usage. The only place where the
usage was not devicetree related is console_loglevel, but the same
name was used for consistency. Any stage that is not ramstage has
the const C attribute applied when DEVTREE_CONST is used.
Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19333
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The SD/MMC support is broken into several pieces. There are three main
data structures:
* sdhci_ctrlr - This is SDHCI controller specific and defined in
include/device/sdhci.h
* sd_mmc_ctrlr - This contains generic controller management data and
defined in include/device/sd_mmc_ctrlr.h
* storage_media - This contains the flash storage device management data
and is defined in include/device/storage.h
The SD/MMC driver consists of several components:
* SDHCI controller code
* bouncebuf.c
* bouncebuf.h
* pci_sdhci.c
* sdhci.c
* sdhci.h
* sdhci_adma.c
* sdhci_display.c
* Flash storage device support
* mmc.c
* mmc.h
* sd.c
* sd_mmc.c
* sd_mmc.h
* storage.c
* storage.h
* storage_erase.c
* storage_write.c
Kconfig values enable various portions of the controller and storage
drivers to be built to reduce the overall size of what is included in
the final image.
Full read/write/erase operations are provided for those platforms which
want to take advantage. It is also possible to build the driver to
perform initialization only. By default, this driver is not included in
any platform, platforms must specifically select DRIVERS_STORAGE to add
the SD/MMC support.
After this patch is reviewed and merged, there are some additional
patches:
* Common CAR storage area - Use a predefined region of CAR to pass data
structures between bootblock through to romstage. This allows early
stages to preform the SD/MMC device initialization and later stages
to use the SD/MMC device without further initialization. The example
code initializes the SD/MMC device in bootblock and uses the SD/MMC
device in romstage without further initialization.
* CBMEM ID - Add a CBMEM ID value for the data structures so that they
may be passed from romstage to ramstage and eventually the payload.
The example uses the SD/MMC device in ramstage without further
initialization.
* Move the SD/MMC driver into commonlib
* Have libpayload build the SD/MMC driver from commonlib. The intent
is to pass the controller state to libpayload so that the SD/MMC
device can be used without further initialization.
* On some platforms, have depthcharge use the commonlib SD/MMC driver
History:
Copy the SD/MMC driver from depthcharge revision eb583fa8 into coreboot
and make the following changes:
* Removed #include "config.h" from mmc.c, allow the lint tests to pass.
* Move include files from drivers/storage into include/device.
* Rename mmc.h to storage.h.
* Add the Kconfig and Makefile and make edits to get the code to build.
* Add support to initialize a PCI controller.
* Fix formatting issues detected by checkpatch.
* Fix data flow issues detected by checkpatch.
* Add the missing voltage (MMC_VDD_35_36) into the voltage mask.
* Rename the macros mmc_debug, mmc_trace and mmc_error to sd_mmc_*.
* Replace printf with sd_mmc_error.
* Add sdhc_debug, sdhc_trace and sd_error macros.
* Add Kconfig values to enable storage device debugging and tracing.
* Add tracing and debug support to the SDHCI driver.
* Allow SOC to override more controller features.
* Split out ADMA support.
* Move 1V8 support into SOC routine.
* Move HS400 support into SOC routine.
* Rework clock handling.
* Change all controller references to use ctrlr.
* Update the voltage handling.
* Update modes of operation.
* Move DMA fields into MmcCtrlr.
* Update bus width support.
* Change MMC_TIMING_* to BUS_TIMING_*.
* Rename MMC_MODE_ to DRVR_CAP.
* Move quirks into ctrlr->caps.
* Associate removeable with the controller.
* Statically allocate MmcMedia.
* Replace the SdhciHost structure with the MmcCtrlr structure.
* Split the code to support other SD/MMC controllers.
* Split out erase and write support.
* Update the code to be more consistent with the coreboot coding style.
* Only expose calling APIs.
* Divide up mmc.c into 4 modules: MMC, SD, storage card, common code.
* Update debug and error messages.
* Add partition support.
* Display clock frequencies once in MHz.
* Remove mmc_send_cmd, use ctrlr->send_cmd instead.
* Handle error from sd_send_op_cond.
* Allow mainboard to control delays around CMD 0.
* Support command logging.
* Mainboard may set delay after SD/MMC command.
* Display serial number with sd_mmc_trace.
* Remove cmd set parameter from mmc_switch.
* Display errors for timeout and comm errors.
* Add LED support.
* Move 64bit DMA flag into ctrlr->caps.
* Rework PIO transfer routine.
* Add HS200 bus tuning.
* Add support for HS400.
* Use same format for HS400, HS200 and HS52.
* Reduce storage_media structure size
* Add routine to update code pointers
* Add display of storage setup
* Display controller setup
TEST=Build and run on Reef and Galileo Gen2
Change-Id: I9b5f9db1e27833e4ce4a97ad4f5ef3a46f64f2a2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19208
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: line over 80 characters
Changed a few comments to reduce line length. File
src/include/cpu/amd/vr.h was skipped.
TEST=Build and run on Galileo Gen2
Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18687
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Avoid gcc v4.3+ binary constant extension: <...>
TEST=Build and run on Galileo Gen2
Change-Id: Iab29c494060df3f60eff5317259e0fdbfea06f27
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18685
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Unnecessary space before function pointer arguments
TEST=Build and run on Galileo Gen2
Change-Id: I2b56af20d5f74cc2625d3cb357fbb137bd440af0
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18660
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: space prohibited between function name and open parenthesis '('
TEST=Build and run on Galileo Gen2
Change-Id: I0ac30b32bab895ca72f91720eeae5a5067327247
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18656
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors detected by checkpatch.pl:
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo* bar" should be "foo *bar"
ERROR: "foo*bar" should be "foo *bar"
TEST=Build and run on Galileo Gen2
Change-Id: I5a3ff8b92e3ceecb4ddf45d8840454d5310fc6b3
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18655
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: braces {} are not necessary for single statement blocks
TEST=Build and run on Galileo Gen2
Change-Id: I00b59f6a27c3acb393deaa763596363b7e958efd
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18654
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix the following errors and warning detected by checkpatch.pl:
ERROR: open brace '{' following enum go on the same line
ERROR: open brace '{' following struct go on the same line
ERROR: that open brace { should be on the previous line
WARNING: missing space after struct definition
TEST=Build and run on Galileo Gen2
Change-Id: I856235d0cc3a3e59376df52561b17b872b3416b2
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18653
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: please, no space before tabs
TEST=Build and run on Galileo Gen2
Change-Id: If60a58021d595289722d1d6064bea37b0b0bc039
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18652
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error messages found by checkpatch.pl:
ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
TEST=Build and run on Galileo Gen2
Change-Id: I2a9a0df640c51ff3efa83dde852dd6ff37ac3c06
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18651
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error found by checkpatch.pl:
ERROR: Macros with complex values should be enclosed in parentheses
False positives are detected for attribute macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define BOOT_STATE_INIT_ATTR __attribute__ ((used, section
(".bs_init")))
False positive also generated for macros for linker script files. An
example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define CBFS_CACHE(addr, size) \
+ REGION(cbfs_cache, addr, size, 4) \
+ ALIAS_REGION(cbfs_cache, preram_cbfs_cache) \
+ ALIAS_REGION(cbfs_cache, postram_cbfs_cache)
False positives generated for assembly code macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define DECLARE_OPTIONAL_REGION(name) asm (".weak _" #name ", _e" #name
)
False positive detected when macro includes multiple comma separated
values. The following code is from src/include/device/azalia_device.h:
#define AZALIA_SUBVENDOR(codec, val) \
(((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)), \
(((codec) << 28) | (0x01721 << 8) | (((val) >> 8) & 0xff)), \
(((codec) << 28) | (0x01722 << 8) | (((val) >> 16) & 0xff)), \
(((codec) << 28) | (0x01723 << 8) | (((val) >> 24) & 0xff))
TEST=Build and run on Galileo Gen2
Change-Id: I6e3b6950738e6906851a172ba3a22e3d5af1e35d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18649
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Decode DDR2 SPD similar to DDR3 SPD decoder to ease
readability, reduce code complexity and reduce size of
maintainable code.
Rename dimm_is_registered to spd_dimm_is_registered_ddr3 to avoid
compilation errors.
Change-Id: I741f0e61ab23e3999ae9e31f57228ba034c2509e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18273
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
|
|
Fix the following error detected by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
TEST=Build and run on Galileo Gen2
Change-Id: I297bfc3d03dc95b471d3bb4b13803e81963841b5
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18647
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error and warning detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
TEST=Build and run on Galileo Gen2
Change-Id: I487771b8f4d7e104457116b772cd32df5cd721a6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18646
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
BRANCH=none
BUG=None
TEST=Build and run on Galileo Gen2
Change-Id: I23d9b4b715aa74acc387db8fb8d3c73bd5cabfaa
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18607
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
scan_smbus routine does not perform any smbus specific operation. Thus,
rename the routine to scan_generic_bus so that it can be used by other
buses like SPI. Add a wrapper scan_smbus to allow other users of smbus
scan to continue working as before.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I8ca1a2b7f2906d186ec39e9223ce18b8a1f27196
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18363
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for a new "SPI" device type in the devicetree to bind a
device on the SPI bus. Allow device to provide chip select number for
the device as a parameter.
Add spi_bus_operations with operation dev_to_bus which allows SoCs to
define a translation method for converting "struct device" into a unique
SPI bus number.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully.
Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18340
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I14c044bb32713ef4133bce8a8238a2bc200c4959
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18085
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add VFCT table to provide PCI Optiom Rom for
AMD graphic devices.
Useful for GNU Linux payloads and embedded dual GPU systems.
Tested on Lenovo T500 with AMD RV635 as secondary gpu.
Original Change-Id: I3b4a587c71e7165338cad3aca77ed5afa085a63c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422
Reviewed-on: https://review.coreboot.org/18192
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add helper function to find a device by path type
in the device tree.
Change-Id: I8846f63bd2488788ea3c7ab5154e7cf431a252bc
Credits-to: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Dhaval V Sharma <dhaval.v.sharma@intel.com>
Reviewed-on: https://review.coreboot.org/17731
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17695
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
MMCONF operations are already the default so these
would never be used.
Change-Id: I671f3d2847742e400bc4ecfccc088e3b79d43070
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The defines of device IDs reflects the vendor namespace
the ID has been allocated from.
Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17510
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add declaration for smbus write. Early smbus access also needs smbus
write function specially to read spd for DDR4 wherein page has to be
switched by smbus write.
Change-Id: I246cbdf0b52923f01dd036f63df17bf9af043c9f
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17557
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Specification allows for the unique identifier bytes 117..125
to be excluded of CRC calculation. For such SPD, the CRC
would not identify replacement between two identical DIMM parts,
while memory training needs to be redone.
Change-Id: I8e830018b15c344d9f72f921ab84893f633f7654
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17486
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to PCI LOCAL BUS SPECIFICATION, REV. 3.0 page 305,
the sub-class for Entertainment en/decryption is 0x1010
Change-Id: Ia069e2ec328a8180fc1e2e70146c3710e703ee59
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17436
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Adjust the names to match AMD's convention for family and model.
This patch is relevant for:
Trinity & Richland: Family 15h Models 00h-0Fh
Carrizo: Family 15h Models 60h-6Fh
Mullins & Steppe Eagle: Family 16h Models 30h-3Fh
Change-Id: I613b84ed438fb70269d789c9901f1928b5500757
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17169
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Martin Roth <martinroth@google.com>
|
|
Add the D18F0 device ID for the Stoney APU.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
(cherry picked from commit c0fd7f70527c273bcbdce5655a21ca4de4854428)
Change-Id: Ib599fc6119a3cef53f4f179c2fcd0e45905d81a4
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17141
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change the argument to #ifdef from __PRE_RAM__ to __SIMPLE_DEVICE__
in order to account for the coreboot stages that do not define device_t
and are not __PRE_RAM__ (i.e. smm) device_t
Change-Id: Ic6e9b504803622b60b5217c9432ce57caefc5065
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16369
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Correct the definitions for 16b and 32b SO-DIMM modules.
Regarding JEDEC Standard No. 21-C
Annex K: Serial Presence Detect for DDR3 SDRAM Modules (2014),
the hex values used for 16b-SO-DIMM is 0x0c
and for 32b-SO-DIMM module type is 0x0d
Change-Id: I9210ac3409a4aaf55a0f6411d5960cfdca05068d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15262
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
IvyBridge memory controller supports more frequencies than SandyBridge.
Required for future patches.
Change-Id: I0bcb670c20407ec0aec20bae85c4cbe6ccc44b16
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15182
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In order to support doing bus operations on an I2C device that is
described in the devicetree there needs to be some linkage of the
device and the existing opaque I2C controller bus number.
This is provided in a similar fashion to the existing SMBUS operations
but modified to fit within the existing I2C infrastructure.
Variants of the existing I2C helper functions are provided that will
obtain the bus number that corresponds to this device by looking for
the SOC-provided I2C bus operation structure to provide a function
that will make that translation.
For example an SOC using a PCI I2C controller at 0:15.0 could use:
soc/intel/.../i2c.c:
static int i2c_dev_to_bus(struct device *dev)
{
if (dev->path.pci.devfn == PCI_DEVFN(0x15, 0))
return 0;
return -1;
}
static struct i2c_bus_operation i2c_bus_ops = {
.dev_to_bus = &i2c_dev_to_bus
}
static struct device_operations i2c_dev_ops = {
.ops_i2c_bus = &i2c_bus_ops
...
}
With an I2C device on that bus at address 0x1a described in the tree:
devicetree.cb:
device pci 15.0 on # I2C0
chip drivers/i2c/sample
device i2c 1a.0 on end
end
end
That driver can then do I2C transactions with the device object
without needing to know that the SOC-specific bus number that this
I2C device lives on is "0".
For example it could read a version value from register address 0
with a byte transaction:
drivers/i2c/sample/sample.c:
static void i2c_sample_enable(struct device *dev)
{
uint8_t ver;
if (!i2c_dev_readb(dev, 0x00, &ver))
printk(BIOS_INFO, "I2C %s version 0x02x\n", dev_path(dev), ver);
}
Change-Id: I6c41c8e0d10caabe01cc41da96382074de40e91e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15100
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add required definitions to describe an ACPI I2C bus and a method to
write the I2cSerialBus() descriptor to the SSDT.
This will be used by device drivers to describe their I2C resources to
the OS. The devicetree i2c device can supply the address and 7 or 10
bit mode as well as indicate the GPIO controller device, and the bus
speed can be fixed or configured by the driver.
chip.h:
struct drivers_i2c_generic_config {
enum i2c_speed bus_speed;
};
generic.c:
void acpi_fill_ssdt_generator(struct device *dev) {
struct drivers_i2c_generic_config *config = dev->chip_info;
struct acpi_i2c i2c = {
.address = dev->path->i2c.device,
.mode_10bit = dev->path.i2c.mode_10bit,
.speed = config->bus_speed ? : I2C_SPEED_FAST,
.resource = acpi_device_path(dev->bus->dev)
};
...
acpi_device_write_i2c(&i2c);
...
}
devicetree.cb:
device pci 15.0 on
chip drivers/i2c/generic
device i2c 10.0 on end
end
end
SSDT.dsl:
I2cSerialBus (0x10, ControllerInitiated, 400000, AddressingMode7Bit,
"\\_SB.PCI0.I2C0", 0, ResourceConsumer)
Change-Id: I598401ac81a92c72f19da0271af1e218580a6c49
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14935
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a function to "struct device_operations" to return the ACPI name
for the device, and helper functions to find this name (either from
the device or its parent) and to build a fully qualified ACPI path
from the root device.
This addition will allow device drivers to generate their ACPI AML in
the SSDT at boot, with customization supplied by devicetree.cb,
instead of needing custom DSDT ASL for every mainboard.
The root device acpi_name is defined as "\\_SB" and is used to start
the path when building a fully qualified name.
This requires SOC support to provide handlers for returning the ACPI
name for devices that it owns, and those names must match the objects
declared in the DSDT. The handler can be done either in each device
driver or with a global handler for the entire SOC.
Simplified example of how this can be used for an i2c device declared
in devicetree.cb with:
chip soc/intel/skylake # "\_SB" (from root device)
device domain 0 on # "PCI0"
device pci 19.2 on # "I2C4"
chip drivers/i2c/test0
device i2c 1a.0 on end # "TST0"
end
end
end
end
And basic SSDT generating code in the device driver:
acpigen_write_scope(acpi_device_scope(dev));
acpigen_write_device(acpi_device_name(dev));
acpigen_write_string("_HID", "TEST0000");
acpigen_write_byte("_UID", 0);
acpigen_pop_len(); /* device */
acpigen_pop_len(); /* scope */
Will produce this ACPI code:
Scope (\_SB.PCI0.I2C4) {
Device (TST0) {
Name (_HID, "TEST0000")
Name (_UID, 0)
}
}
Change-Id: Ie149595aeab96266fa5f006e7934339f0119ac54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14840
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
i2c_read_field() - read the value from the specific register field
i2c_write_field() - write the value to the specific register field
BRANCH=none
BUG=none
TEST=none
Change-Id: I2098715b4583c1936c93b3ff45ec330910964304
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c
Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add multi-bytes read support.
BRANCH=none
BUG=none
TEST=saw edid log and dev screen
Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306
Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/325211
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13978
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The PLL multiplier value is off by one for DDR3-1866 due to a
wrong TCK value, resulting in DDR3-1600 being used by the PLL.
Needs test on real hardware !
Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Parse manufacturer id and ASCII serial.
Required for SMBIOS type 17 field.
Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13862
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of hardcoding the maximum supported DDR frequency to
800Mhz (DDR3-1600), read the fuse bits that encode this information.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13487
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some vendors store lower frequency profiles in the regular SPD,
if the SPD contains a XMP profile. To make use of the board's and DIMM's
maximum supported DRAM frequency, try to parse the XMP profile and
use it instead.
Validate the XMP profile to make sure that the installed DIMM count
per channel is supported and the requested voltage is supported.
To reduce complexity only XMP Profile 1 is read.
Allows my DRAM to run at 800Mhz instead of 666Mhz as encoded in the
default SPD.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Change-Id: Ib4dd68debfdcfdce138e813ad5b0e8e2ce3a40b2
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13486
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Add an optional routine to translate the device path types into a string
for display.
TEST=Build and run on Galileo
Change-Id: Iea5d0a2430d9a8546105324e2beda0955210dca9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
pci_def.h is supposed to only contain definitions, such that it may be
included in assembly files. Declaration of functions in said file
prevents that.
Change-Id: I0f90a74291c8a2ef7a1e1027d2d2182f896050fb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/13300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
According to the PNP ISA v1.0a spec, config registers in the range of
0xf0 up to 0xfe are vendor defined and may be used for any purpose.
Config register 0xff is reserved and is defined as such.
Currently, only vendor specific registers 0xf0, 0xf1, 0xf4, and 0xfa
are able to be set using the PNP_MSCx bit flag masks.
This patch adds support for all 15 vendor specific config registers,
and updates the existing superio pnp_info to use them where appropriate.
Change-Id: Id43b85f74e3192b17dbd7e54c4c6136a2e59ad55
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12808
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I2083d0c5653515c27d4626c62a6499b850f7547b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12044
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11981
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I37763a59d2546cd0c0e57b31fdb7aa77c2c50bee
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11937
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12079
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
|
|
To help hypervisors to assign PCI devices individually to virtualization
guests, page align dynamically allocated MMIO resources.
Tested with kontron/ktqm77 which has dynamically configured onboard
devices on the root bus and secondary buses. Booted Linux and checked
the configuration with `lspci -v`. Got the configuration through Muen's
tools which are very picky about overlapping and alignment. Booted a
Muen based system that uses many onboard devices. GMA, xHCI and one NIC
(on a secondary bus) were verified to function properly.
Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12111
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add some missing devices to device tree and header.
Remove the obsolete devices.
Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to prepare for more unification of the linker
scripts prefix pci_drivers, epci_drivers, cpu_drivers, and
ecpu_drivers with an underscore.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built different boards includes ones w/ and w/o relocatable
ramstage.
Change-Id: I8918b38db3b754332e8d8506b424f3c6b3e06af8
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11506
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kconfigs symbols of type bool are always defined, and can be tested with
the IS_ENABLED() macro.
symbol type except string.
Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Tested on Bettong. Windows 7, Windows 8.1 and Ubuntu 14.04 can boot.
Change-Id: Ifcbfa0eab74875638a40e74ba2a3bb7c4fb02761
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10419
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I5ff309948c36289eedeb8a18030cdd2b4c337690
Reviewed-on: http://review.coreboot.org/10595
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
It's not used outside of very old AMD CPUs.
Change-Id: Ide51ef1a526df50d88bf229432d7d36bc777f9eb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10538
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Kern is the southbridge of AMD Merlin Falcon(Carrizo).
This add support of HD audio, lpc, sata and usb for Kern.
Change-Id: Ie47e38bc1099cdb72002619cb1da269f3739678b
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10418
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The type of a resource is really an enumeration but our implementation
is as a bitmask. Compare all relevant bits and remove the shadowed
declarations of IORESOURCE bits.
Change-Id: I7f605d72ea702eb4fa6019ca1297f98d240c4f1a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8891
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9599
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9597
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ice7cb89c19585cf725b6f73c33443050f8d65418
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8565
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I1e935a6b848a59f7f2e58779bceea599032de9e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8562
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I3b00e5e4e45089fbd7d0d6243d5e441bd8929c0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8557
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
The input/output value max is no longer used for tracking the
bus enumeration sequence, everything is handled in the context
of devicetree bus objects.
Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ifd277992a69a4182e2fac92aaf746abe4fec2a1b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8540
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8539
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I1766c92abe7a74326c49df74ba38930a502fcb5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8536
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Allows to remove parameter max from the call, it is not involved
with the unitid assignment.
Change-Id: I087622f4ff69474f0b27cfd8709106ab8ac4ca98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8687
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Replace the multiple indexed I/O read and write
functions with common functions.
Change-Id: Idfe7a8784c28d51b3fbcb2f4e26beaa0b91741a8
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/10145
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add support to display class and subclass names for PCI devices.
BRANCH=none
BUG=None
TEST=Build and run on strago/cyan.
Change-Id: I5136fae45b8a1cd02541f233d29a246cdfcd8331
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c9b0d7201b09a06ea32f0db84187d15f767c80
Original-Change-Id: Ibf2ee89dd84040ca6ab0e52857a69f7ed0c28f37
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/263342
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9901
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes quite a bit of code duplication between cpu_to_le32()
and clrsetbits_le32() style macros on the different architectures. This
also syncs those macros back up to the new write32(a, v) style IO
accessor macros that are now used on ARM and ARM64.
CQ-DEPEND=CL:254862
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu,
Storm and Urara. Booted on Jerry. Tried to compare binary images...
unfortunately something about the new macro notation makes the compiler
evaluate it more efficiently (not recalculating the address between the
read and the write), so this was of limited value.
Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b
Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254866
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=None
TEST=Build Braswell/Strago
Change-Id: I11a4c02af3b40edf2252b9e20298941b99f31d21
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1629d7454a3d4adb8930d14849c41c9a711f4c9a
Original-Change-Id: Ie907637f7c823de681ef2e315e803dffc6ad33d3
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241081
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9487
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable L1 Sub-State when both root port and endpoint support it.
[pg: keyed the feature to MMCONF_SUPPORT, otherwise boards
without that capability fail to build.]
Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092
Original-BUG=chrome-os-partner:31424
Original-TEST=Build a image and run on Samus proto boards to check if the
settings are applied correctly. I just only have proto boards and
need someone having EVT boards to confirm the settings.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a
Original-Reviewed-on: https://chromium-review.googlesource.com/221436
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also fix a typo in a config option for SteppeEagle.
Change-Id: Iad51cc917217aa0eac751dc805c304652d20e066
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7247
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Set PCIe "Enable Clock Power Management", if endpoint supports it.
BUG=chrome-os-partner:31424
BRANCH=none
TEST=build and boot on rambi, check Enable Clock Power Management
in link control register is set properly
Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/220742
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
[Edit commit message.]
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8447
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
src/include/device/ is the place for include files of the resource
allocator. Hence, drop the i915 include file copies and use the ones
supplied with the i915 driver instead. The only remaining user of this
was the Intel Whitetip Mountain 2 reference board, all other occurences
have been previously fixed already.
Change-Id: Ib9f72df4e8f847597508971e9dbf671f49019767
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8140
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is just dead code.
Should we decide that we want some of these calls made, they would
be implemented in the mainboard context.
Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8532
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I198f2ad321e1a8b6d932f5624b129e312e36a309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8349
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
|
|
There is no auto-detection for AGP type and we have no hardware that
selects this. Furthermore, we treat AGP bridges just like PCI bridges,
there is no optimisation for higher bandwidth.
Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8367
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add native XGI Z9s framebuffer support to coreboot
XGI initialization code largely taken from Linux 3.18.5
TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS
with SeaVGABIOS enabled. Text appeared correctly on screen
and interaction with graphical comboot menu was successful.
However, Linux cleared the framebuffer on boot, rendering the
screen useless until Linux loaded its native xgifb driver.
Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8331
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Copied from device_util.c with added ROMSTAGE_CONST.
Change-Id: If872631ed96a79b9a0b15e09382d6f81098c8db3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8297
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
- Join doxygen file command with the file description
- Give extended file location so doxygen knows which early_sbmus.h
the file is. (I don't get this either, but it fixes the warning)
Change-Id: Ia91fb1ac1e9687e1a5a5cb5234696b3c24d4cd24
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8174
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds I2C emulation in software through raw toggling of the
SDA/SCL lines. Platforms need to provide bindings to toggle their
respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs,
currently only enabled for Tegra).
This is mostly useful as a debugging feature, to drive unusual states on
a bus and closely monitor the device output without the need of a bus
analyzer. It provides a few functions to "wedge" an I2C bus by aborting
a transaction at certain points, which can be used to test if a system
can correctly recover from an ill-timed reboot. However, it can also
dynamically replace the existing I2C transfer functions and drive
some/all I2C transfers on the system, which might be useful if a driver
for the actual I2C controller hardware is not (yet) available.
Based on original code by Doug Anderson <dianders@chromium.org> and
Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded
controller project.
BRANCH=None
BUG=chrome-os-partner:28323
TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable()
through the code and see that everything still works.
Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198791
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682
Reviewed-on: http://review.coreboot.org/7947
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
After relocation the weak symbol map_oprom_vendev is no longer NULL.
Always have empty stub function defined.
Change-Id: I5b1bdeb3f37bb04363cf3d9dedaeafc9e193aaae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7956
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The new API is in use in depthcharge and is based around the "i2c_transfer"
function instead of i2c_read and i2c_write. The new function takes an array of
i2c_seg structures which represent each portion of the transfer after a start
bit and before the stop bit. If there's more than one segment, they're
seperated by repeated starts.
Some wrapper functions have also been added which make certain common
operations easy. These include reading or writing a byte from a register or
reading or writing a blob of raw data. The i2c device drivers generally use
these wrappers but can call the i2c_transfer function directly if the need
something different.
The tegra i2c driver was very similar to the one in depthcharge and was simple
to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and
replace the ones in coreboot. The Exynos 5420 driver was ported from the high
speed portion of the one in coreboot and was straightforward to port back. The
low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot
and were replaced with the depthcharge implementation.
BUG=None
TEST=Built and booted on nyan with and without EFS. Built and booted on, pit
and daisy.
BRANCH=None
Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193561
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe)
This cherry-pick required additional changes to the following:
src/cpu/allwinner/a10/twi.c
src/drivers/xpowers/axp209/axp209.c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7
Reviewed-on: http://review.coreboot.org/7751
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Useful for distinguishing registered modules.
Change-Id: Ibf4a0f2cde6d50a1c5c1da0f50e3022a2bc7ccd7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7686
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
As build.h is an auto-generated file it was necessary to add it as
an explicit prerequisite in the Makefiles. When this was forgotten
abuild would sometimes fail with following error:
fatal error: build.h: No such file or directory
Fix this error by compiling version.c into all stages.
Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7510
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
