summaryrefslogtreecommitdiff
path: root/src/include/console
AgeCommit message (Collapse)Author
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-14usbdebug: Fix init and add support for postcarKyösti Mälkki
It was originally designed such that if usbdebug_init() was called before cbmem_initialize(), it would fetch the already-initialized state from CBMEM. This changed when cbmem_find() behaviour changed to require cbmem_initialize() to be called first. As a result, ramstage had to reinitialize all of the EHCI controller and USB endpoints on entry. This was slow, specially with AMD hardware where one can scan USB ports to probe for the debug dongle. For postcar and ramstage, move usbdebug entry such that it is triggered from CBMEM_INIT_HOOK instead of console_init(). Side-effect of this is usbdebug console shows 'coreboot-xxx ... starting...' line only for romstage. Initialisation for usbdebug is never done in postcar. If you have USBDEBUG_IN_ROMSTAGE=n, postcar will not have console output on usb either. While at it, fix also some other __PRE_RAM__ cases to ENV_ROMSTAGE and alike. Change-Id: If8ab973321a801abc5529f3ff68c5dccae9512ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14console: Add weak method to notify about deathPatrick Rudolph
Call weak method die_notify. The method should be overwritten in mainboard directory to signal that a fatal error had occurred. On boards that do share the same EC and where the EC is capable of controlling LEDs or a buzzer the method can be overwritten in EC directory instead. Tested on Lenovo T500. Change-Id: I71f8ddfc96047e8a0d39f084588db1fe2f251612 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19696 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-17intel/fsp: Add and use new post codes for FSP phase indicationSubrata Banik
New post codes are POST_FSP_MEMORY_EXIT POST_FSP_SILICON_EXIT This patch will make it more consistent to debug FSP hang and reset issues. Bug=none Branch=none TEST=Build and Boot on eve Change-Id: I93004a09c2a3a97ac9458a0f686ab42415af19fb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-04console/flashsconsole: Add spi flash console for debuggingYouness Alaoui
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem messages to the 'CONSOLE' area in FMAP which allows us to grab the log when we read the flash. This is useful when you don't have usb debugging, and UART lines are hard to find. Since a failure to boot would require a hardware flasher anyways, we can get the log at the same time. This feature should only be used when no alternative is found and only when we can't boot the system, because excessive writes to the flash is not recommended. This has been tested on purism/librem13 v2 and librem 15 v3 which run Intel Skylake hardware. It has not been tested on other archs or with a driver other than the fast_spi. Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22include/console: Use IS_ENABLED() macroNico Huber
Change-Id: I3d0c61c37399e96c1d154c1d3af5c47db967a07a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19763 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-19console: Add convenient debug level macros for raminitNico Huber
Change-Id: Ib92550fe755293ce8c65edf59242a2b04327128e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19332 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-13src/include: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters Changed a few comments to reduce line length. File src/include/cpu/amd/vr.h was skipped. TEST=Build and run on Galileo Gen2 Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18687 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13src/include: Move constants to the right hand sideLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Comparisons should place the constant on the right side of the test TEST=Build and run on Galileo Gen2 Change-Id: Id790e0034ea5c926fcaef95486319d6c0c936f28 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18682 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-12src/include: Remove spaces before tabsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: please, no space before tabs TEST=Build and run on Galileo Gen2 Change-Id: If60a58021d595289722d1d6064bea37b0b0bc039 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18652 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-10src/include: Add parenthesis around macrosLee Leahy
Fix the following error found by checkpatch.pl: ERROR: Macros with complex values should be enclosed in parentheses False positives are detected for attribute macros. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define BOOT_STATE_INIT_ATTR __attribute__ ((used, section (".bs_init"))) False positive also generated for macros for linker script files. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define CBFS_CACHE(addr, size) \ + REGION(cbfs_cache, addr, size, 4) \ + ALIAS_REGION(cbfs_cache, preram_cbfs_cache) \ + ALIAS_REGION(cbfs_cache, postram_cbfs_cache) False positives generated for assembly code macros. An example is: ERROR: Macros with complex values should be enclosed in parentheses +#define DECLARE_OPTIONAL_REGION(name) asm (".weak _" #name ", _e" #name ) False positive detected when macro includes multiple comma separated values. The following code is from src/include/device/azalia_device.h: #define AZALIA_SUBVENDOR(codec, val) \ (((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)), \ (((codec) << 28) | (0x01721 << 8) | (((val) >> 8) & 0xff)), \ (((codec) << 28) | (0x01722 << 8) | (((val) >> 16) & 0xff)), \ (((codec) << 28) | (0x01723 << 8) | (((val) >> 24) & 0xff)) TEST=Build and run on Galileo Gen2 Change-Id: I6e3b6950738e6906851a172ba3a22e3d5af1e35d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18649 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-09src/include: Add space after commaLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) TEST=Build and run on Galileo Gen2 Change-Id: I297bfc3d03dc95b471d3bb4b13803e81963841b5 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18647 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07console: Enable printk for ENV_LIBAGESAKyösti Mälkki
Messages from AGESA proper are additionally controlled by various IDS parameters in board/OptionsIds.h file. Change-Id: I83e975d37ad2bdecb09c483ecae71c0ed6877731 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18545 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-12drivers/intel/fsp2_0: track end of firmware notificationsAaron Durbin
The end of firmware notification is currently not being tracked so it's hard to get good data on how long it takes. Update the code to provide timestamp data as well as post codes. BUG=chrome-os-partner:56656 Change-Id: I74c1043f2e72d9d85b23a99b8253ac465f62a7f2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17373 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-09-19arch/x86,lib: make cbmem console work in postcar stageAaron Durbin
Implement postcar stage cbmem console support. The postcar stage is more like ramstage in that RAM is already up. Therefore, in order to make the cbmem console reinit flow work one needs the cbmem init hook infrastructure in place and the cbmem recovery called. This call is added to x86/postcar.c to achieve that. Additionally, one needs to provide postcar stage cbmem init hook callbacks for the cbmem console library to use. A few other places need to become postcar stage aware so that the code paths are taken. Lastly, since postcar is backed by ram indicate that to the cbmem backing store. BUG=chrome-os-partner:57513 Change-Id: I51db65d8502c456b08f291fd1b59f6ea72059dfd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16619 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19console: honor CONFIG_POSTCAR_CONSOLEAaron Durbin
The declarations for console_init() were unconditionally exposed even though there is a Kconfig option. Correct this by honoring the CONFIG_POSTCAR_CONSOLE condition. BUG=chrome-os-partner:57513 Change-Id: Id45ae3d7c05a9f4ebcf85c446fc68a709513bb0f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16617 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-05src/include: Improve code formattingElyes HAOUAS
Change-Id: Ic8ffd26e61c0c3f27872699bb6aa9c39204155b7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16390 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-16console: Change CONFIG_CHROMEOS requirement from do_printk_va_list()Julius Werner
CONFIG_VBOOT was recently moved to be independent from CONFIG_CHROMEOS. Change the code guard for do_printk_va_list() accordingly, since it's used by vboot (not Chrome OS) code. Change-Id: I44e868d2fd8e1368eeda2f10a35d0a2bd7259759 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16230 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-10console: Add write line routineLee Leahy
Add write line routine which is called indirectly by FSP. TEST=Build and run on Galileo Gen2. Change-Id: Idefb6e9ebe5a2b614055dabddc1882bfa3bba673 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16127 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-02console: Drop leftover struct console_driverKyösti Mälkki
Change-Id: I4d529f6393937e5b97d8546f9348b44a448330e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/16007 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-01arch/x86: Enable postcar consoleLee Leahy
Add a Kconfig value to enable the console during postcar. Add a call to console_init at the beginning of the postcar stage in exit_car.S. TEST=Build and run on Galileo Gen2 Change-Id: I66e2ec83344129ede2c7d6e5627c8062e28f50ad Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16001 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31src/include: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: Id40c1bf868820c77ea20146d19c6d552c2f970c4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15942 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-25drivers/uart: Enable debug serial output during postcarLee Leahy
Build the UART drivers for the postcar stage. TEST=Build and run on Galileo Gen2 Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15843 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-22soc/intel/common/acpi: Add _PTS, _WAK methodsHannah Williams
Change-Id: I72f894fd14bf0e333d9fda970397a3c82de598c3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15121 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09drivers/uart: Enable override for input clock dividerLee Leahy
Allow the platform to override the input clock divider by adding the uart_input_clock_divider routine. This routine combines the baud-rate oversample divider with any other input clock divider. The default routine returns 16 which is the standard baud-rate oversampling value. A platform may override this default "weak" routine by providing a new routine and selecting UART_OVERRIDE_INPUT_CLOCK_DIVIDER. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: Ieb6453b045d84702b8f730988d0fed9f253f63e2 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14611 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03intel/fsp: Add post codes for FSP phasesDuncan Laurie
Add post codes for the various FSP phases and use them as appropriate in FSP 1.0 and 1.1 implementations. This will make it more consistent to debug FSP hangs and resets. BUG=chrome-os-partner:40635 BRANCH=none TEST=build and boot on glados and chell Change-Id: I32f8dde80a0c6c117fe0fa48cdfe2f9a83b9dbdf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3b616ff3c9d8b6d05c8bfe7f456f5c189e523547 Original-Change-Id: I081745dcc45b3e9e066ade2227e675801d6f669a Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313822 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12595 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-07arm64: remove secmonAaron Durbin
It's been decided to only support ARM Trusted Firmware for any EL3 monitor. That means any SoC that requires PSCI needs to add its support for ATF otherwise multi-processor bring up won't work. Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11897 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-11cbmem console: make verstage first class citizenAaron Durbin
The conditions in cbmem console for supporting verstage were implicitly utilizing CONFIG_BOOTBLOCK_CONSOLE to handle the cbmem console enablement. Fix it so verstage is a first class citizen for deciding actions pertaining to cbmem console. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using verstage. cbmem console shows verstage output. Change-Id: Iba79efd1c1d4056f1a105a5e10ffc95f3e69b597 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11820 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-11Clearly define printk log level use cases.Nicky Sielicki
The proper log level for any given printk statement is up to the interpretation of the developer. This results in console output with somewhat inconsistent levels of verbosity. This patch clearly defines each log level and its use case, hopefully resulting in less ambiguity for developers. The concern with this patch might be that it leaves a lot of preexisting printk statements using a log level that is inconsistent with the description. I think that *most* statements map to these extended definitions very nicely. The most discrepancies are between debug and spew, but I'm willing to say that 95% of statements with a level lower than debug are correct by these definitions. There was some discussion dating back to 2010 on the mailing list about renaming these constants to lose the 'BIOS_' prefix and to consolidate some of them into a single constant. I disagree that it is necessary to merge any of them, I think they all have unique use cases. But I do think that if you all agree with these definitions, it might be useful to rename them to reflect their use cases. I also will add that I believe removing BIOS_NEVER is a good idea. I do not see the use case, and it's used in only 4 files. Change-Id: I8aefdd9dee4cb4ad2fc78ee7133a93f8ddf0720b Signed-off-by: Nicky Sielicki <nlsielicki@wisc.edu> Reviewed-on: http://review.coreboot.org/10444 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-09cbmem: Unify CBMEM init tasks with CBMEM_INIT_HOOK() APIKyösti Mälkki
Squashed and adjusted two changes from chromium.git. Covers CBMEM init for ROMTAGE and RAMSTAGE. cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API There are several use cases for performing a certain task when CBMEM is first set up (usually to migrate some data into it that was previously kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them differently: timestamp migration is called explicitly from cbmem_initialize(), certain x86-chipset-specific tasks use the CAR_MIGRATION() macro to register a hook, and the CBMEM console is migrated through a direct call from romstage (on non-x86 and SandyBridge boards). This patch decouples the CAR_MIGRATION() hook mechanism from cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer description of what it really does. All of the above use cases are ported to this new, consistent model, allowing us to have one less line of boilerplate in non-CAR romstages. BRANCH=None BUG=None TEST=Built and booted on Nyan_Blaze and Falco with and without CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after boot (and the resume log after S3 resume on Falco). Compiled for Parrot, Stout and Lumpy. Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/232612 Reviewed-by: Aaron Durbin <adurbin@chromium.org> cbmem: Extend hooks to ramstage, fix timestamp synching Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since timestamp_sync() was no longer called there. Oops. This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism to the cbmem_initialize() call in ramstage. The macro is split into explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as possible and prevent surprises (although just using a single macro and relying on the Makefiles to link an object into all appropriate stages would also work). This allows us to get rid of the explicit cbmemc_reinit() in ramstage (which I somehow accounted for in the last patch without realizing that timestamps work exactly the same way...), and replace the older and less flexible cbmem_arch_init() mechanism. Also added a size assertion for the pre-RAM CBMEM console to memlayout that could prevent a very unlikely buffer overflow I just noticed. BRANCH=None BUG=None TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once again show up. Compile-tested for Rambi and Samus. Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/233533 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7878 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-26consoles: remove unused infrastructureAaron Durbin
The __console attribute as well as linker binding was dropped at some point. Kill of the dead code and infrastructure. Change-Id: I15e1fb4468fffe2e148ec9ac8539dfd958551807 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10279 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-13secmon: allow for serial consoleAaron Durbin
Add necessary checks and objects for secmon serial console. Change-Id: Ibafa19061255ef6847a424922565a866328ff34c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10197 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-05-13verstage: provide support for serial consoleAaron Durbin
verstage previously lacked serial console support. Add the necessary objects and macro checks to allow verstage to include the serial console. Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10196 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-05-05console: rename do_vtxprintf to do_printk_va_list and use itAaron Durbin
The name is more consistent with what we have elsewhere, and the callsite didn't build at all (with vboot enabled) Change-Id: I3576f3b8f737d360f68b67b6ce1683199948776d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10096 Tested-by: build bot (Jenkins)
2015-04-27cbmem: add and use a function to dump console bufferVadim Bendebury
The new function can be compiled in only when serial console is disabled. When invoked, this function initializes the serial interface and dumps the contents of the CBMEM console buffer to serial output. BRANCH=none BUG=chromium:475347 TEST=compiled for different platforms with and without serial console enabled. No actual test of this function yet. Change-Id: Ia8d16649dc9d09798fa6970f2cfd893438e00dc5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a38a8254dd788ad188ba2509b9ae117d6f699579 Original-Change-Id: Ib85759a2727e31ba1ca21da7e6c346e434f83b52 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/265293 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9984 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-23cbmem_console: fix it for x86Aaron Durbin
The Kconfig options pertaining cbmem console in the preram environment no longer make sense with the linker script changes. Remove them and their usage within cbmem_console. Change-Id: Ibf61645ca2331e4851e748e4e7aa5059e1192ed7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9851 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14Add console wrapper for UART driverVadim Bendebury
Coreboot is designed to have a single serial console at most, on top of that it may have a CBMEM (virtual) console. Matters are complicated by the fact that console interface is different between bootblock and later stages. A linker list of console driver descriptors is used to allow to determine the set and type of console drivers at compile time. Even though the upstream seems to have done away with this approach, which does not seem the best idea. As an alternative this patch introduces a common wrapper which different UART drivers can plug in into. The driver exports a single API which can be used both directly (in bootblock) and through the wrapper (in later stages). The existing drivers can be adjusted to fit this scheme one by one. The common UART driver API also aligns fine with the upstream approach. BUG=chrome-os-partner:27784 TEST=none yet Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196660 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Reviewed-on: http://review.coreboot.org/7872 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-28arm64: Add support for secure monitorFurquan Shaikh
Secure monitor runs at EL3 and is responsible for jumping to the payload at specified EL and also to manage features like PSCI. Adding basic implementation of secure monitor as a rmodule. Currently, it just jumps to the the payload at current EL. Support for switching el and PSCI will be added as separate patches. CQ-DEPEND=CL:218300 BUG=chrome-os-partner:30785 BRANCH=None TEST=Compiles succesfully and secure monitor loads and runs payload on ryu Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34 Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/214371 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9080 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-09console: Fix broken early_print.h include guardsStefan Reinauer
Make compilation fail if this is included in non-romcc compiles. I am a bit surprised that this ever compiled. Change-Id: I8dfc1229681819d2381821a0195a89b44dd76b6a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8420 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-27CBMEM console: Fix and enhance pre-RAM supportKyösti Mälkki
Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-09misc: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. Instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the generic code pieces to use printk() on all non-ROMCC boards. Our two remaining ROMCC boards are fixed up in this commit: bifferos/bifferboard and dmp/vortex86ex. Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8115 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Andrew Wu <arw@dmp.com.tw> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09src/include: Doxygen fixesMartin Roth
- Join doxygen file command with the file description - Give extended file location so doxygen knows which early_sbmus.h the file is. (I don't get this either, but it fixes the warning) Change-Id: Ia91fb1ac1e9687e1a5a5cb5234696b3c24d4cd24 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8174 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30vboot: Add a new post code for TPM failureDuncan Laurie
If the kernel does not properly handle the TPM and send it a TPM_SaveState command before suspend then it will not be in the correct state on resume. In order to easily detect this case add a new post code for TPM failure and use it in the vboot resume path. BUG=chromium:371105 TEST=Build and boot on wtm2. Original-Change-Id: I412520b521387a8e18ad1c6f5a64b39cdd5c88ec Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199371 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit ff2f0dc56c1a783295710f81567af02729fe1da2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5baf894fd72922acd79d191e5485ae8ef7e0d559 Reviewed-on: http://review.coreboot.org/7936 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-16CBMEM console: Fix boards with BROKEN_CAR_MIGRATEKyösti Mälkki
There is no need to call cbmemc_reinit() exclusively in romstage, that is done as part of the CAR migration of cbmem_recovery(). CBMEM console for romstage remains disabled for boards flagged with BROKEN_CAR_MIGRATE, but with this change it is possible to have it for ramstage. Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-10-16uarts: 32/64 cleanupRonald G. Minnich
We had lots of casts that caused warnings when compiling on RISCV. Clean them up. Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7066 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-26console: Add console for GDBKyösti Mälkki
Connection of UARTs to GDB stub got lost in the console transition process, bring it back. In theory, GDB stub should work also over usbdebug, but that solution is not really tested at all yet. Change-Id: I90e05e8132889e788b92e055ee191f35add43bbc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5343 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30console: Drop EARLY_CONSOLE optionKyösti Mälkki
We have means to easily disable a specific console in romstage if necessary, so this global option makes little sense. The option was initially introduced as a work-around for build issues around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs. Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5607 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18console: Simplify the enable rulesKyösti Mälkki
Consoles on CBMEM and USB have somewhat complex rules and dependencies when they can be active. Use simple variables to test which stage of boot is being built for each console. Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18console: Split ROMCC helpersKyösti Mälkki
These are potentially useful with GDB or SerialICE too. Also it reduces the amount of actual code we put in romcc_console. Change-Id: Id8c56e979660ad9f4eef39c648f68c7ec60edfba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5339 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Drop driver list in ramstageKyösti Mälkki
This framework was only available in ramstage. So we had to define console output functions separately for bootblock, romstage and SMM. Follow-up patches will re-enable all the consoles removed here, in a more flexible fashion, and with less lines-of-code and copy-paste. Also the driver list is not in a well-defined order and some of the loops could exit without visiting all drivers. NOTE: This build has no console in ramstage. Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5337 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09console: Refactor uart8250/NE2KKyösti Mälkki
Do this for symmetry with romstage_console.c. Change-Id: If17acfc3da07b1dbefa87162c3c7168deb7b354a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5330 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Remove old fix for DEBUG_SMIKyösti Mälkki
No longer needed as wrap_putchar() survives SMM relocation to TSEG. Change-Id: I6143844b0b9902ef63baf3e5781a5dc4f54234be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5335 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Simplify vtxprintfKyösti Mälkki
We do not need ROMCC support here and using wrappers for console_tx_byte we can simplify this code. Change-Id: I7f3b5acdfd0bde1d832b16418339dd5e232627e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
This gives us completely transparent low-level function to transmit data. Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5336 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Add printk helper for ChromeOSKyösti Mälkki
Do not expose console_tx_flush() to ChromeOS as that function is part of lower-level implementation. Change-Id: I1e31662da88a60e83f8e5d307a4b53441c130aab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5347 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Hide global console_loglevelKyösti Mälkki
Change-Id: I7bdc468bc3f74516abb2c583bdb5b6d7555d987c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5333 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Split console_init()Kyösti Mälkki
Splitting the version prompt satisfies some requirements ROMCC sets for the order in which we include source files. Also GDB stub will need console hardware before entering main(). Change-Id: Ibb445a2f8cfb440d9dd69cade5f0ea41fb606f50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5331 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09OxPCIe uart: Split PCI bridge controlKyösti Mälkki
None of the PCI bridge management here is specific to the PCI UART device/function. Also the Kconfig variable defaults are not globally valid, fill samsung/lumpy with working values. Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5237 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09console uart: Fill coreboot table entriesKyösti Mälkki
Also fixes the reported baudrate to take get_option() into account. Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5310 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09uart: Prepare to support multiple base addressesKyösti Mälkki
Prepare low-level register access to take UART base address as a parameter. This is done to support a list of base addresses defined in the platform. Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5309 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-10CBMEM console: Fix build for ARMKyösti Mälkki
This preprocessor guard was used to disable CBMEM console from romstage of ROMCC boards. It unintentionally disabled it for ARM too as they do not have CACHE_AS_RAM selected. Option EARLY_CBMEM_INIT implies CAR migration which is required to have CBMEM console in romstage. This change should have been done in commit f8bf5a10 already, but we missed it. Change-Id: I03e95183be0e78bc7dd439d5fef5b10e54966dc3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5356 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-03-04console: Use single driver entry for UARTsKyösti Mälkki
UARTs now have unified prototypes and can use a single entry in the list of drivers for ramstage. Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5308 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-20usbdebug: Unify console APIKyösti Mälkki
Struct dbgp_pipe would not be suitable for use with xHCI. Just use an index, it is easy to setup in Kconfig if our future debug setup has separate pipes for console output and debugging/traceings. Change-Id: Icbbd28f03113b208016f80217ab801d598d443a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5227 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-11Move hexdump32() to lib/hexdump.Kyösti Mälkki
Needs printk and is not a console core function. Change-Id: Id90a363eca133af4469663c1e8b504baa70471e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5155 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-10usbdebug: Improve receive speedKyösti Mälkki
Read from USB endpoint_in 8 bytes at a time, the maximum what EHCI debug port capability has to offer. Change-Id: I3d012d758a24b24f894e587b301f620933331407 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4700 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06QEMU debugcon: Move under drivers/emulation/qemuKyösti Mälkki
Also prepare this console for use in romstage. Change-Id: I26a4d4b5db1e44a261396a21bb0f0574d72aa86d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5136 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-21Add a specific post code for S3 resume failuresDuncan Laurie
If the firwmare is flashed and the MRC cache is blown away then it is not possible to resume. Right now this can be inferred from the event log but it can be made very clear by adding a unique post code for this event. 1) boot falco 2) flash firmware 3) suspend and then resume 4) check for post code 0xef in log 0 | 2013-08-08 16:27:47 | Log area cleared | 4096 1 | 2013-08-08 16:27:47 | ACPI Enter | S3 2 | 2013-08-08 16:27:55 | System boot | 48 3 | 2013-08-08 16:27:55 | Last post code in previous boot | 0xef | Resume Failure 4 | 2013-08-08 16:27:55 | System Reset 5 | 2013-08-08 16:27:55 | ACPI Wake | S5 Change-Id: I7602d9eef85d3b764781990249ae32b84fe84134 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65259 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4458 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-07vtxprintf: Introduce vtxdprintf for the ease of closuresVladimir Serbinenko
It was suggested to eliminate the lock for sprintf. One way to do it is to make the fake tx_byte into a closure. This patch allows it. It's a bit tricky since we need to preserve compatibility with romcc. Change-Id: I877ef0cef54dcbb0589fe858c485f76f3dd27ece Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4287 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-26Clean up POST codes for Boot State machineDuncan Laurie
Now that there is a clearly defined boot state machine we can add some useful post codes to indicate the current point in the state machine by having it log a post code before the execution of each state. This removes the currently defined POST codes that were used by hardwaremain in favor of a new contiguous range that are defined for each boot state. The reason for this is that the existing codes are mostly used to indicate when something is done, which is confusing for actual debug because POST code debugging relies on knowing what is about to happen (to know what may be at fault) rather than what has just finished. One additonal change is added during device init step as this step often does the bulk of the work, and frequently logs POST codes itself. Therefore in order to keep better track of what device is being initialized POST_BS_DEV_INIT is logged before each device is initialized. interrupted boot with reset button and gathered the eventlog. Mosys has been extended to decode the well-known POST codes: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: Ida1e1129d274d28cbe8e49e4a01483e335a03d96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58106 Reviewed-on: http://review.coreboot.org/4231 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Log device path into CMOS during probe stagesDuncan Laurie
One of the most common hangs during coreboot execution is during ramstage device init steps. Currently there are a set of (somewhat misleading) post codes during this phase which give some indication as to where execution stopped, but it provides no information on what device was actually being initialized at that point. This uses the new CMOS "extra" log banks to store the encoded device path of the device that is about to be touched by coreboot. This way if the system hangs when talking to the device there will be some indication where to investigate next. interrupted boot with reset button and gathered the eventlog after several test runs: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: I6045bd4c384358b8a4e464eb03ccad639283939c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58105 Reviewed-on: http://review.coreboot.org/4230 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Extend CMOS POST code logging to store extra dataDuncan Laurie
This can be used to indicate sub-state within a POST code range which can assist in debugging BIOS hangs. For example this can be used to indicate which device is about to be initialized so if the system hangs while talking to that device it can be identified. Change-Id: I2f8155155f09fe9e242ebb7204f0b5cba3a1fa1e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58104 Reviewed-on: http://review.coreboot.org/4229 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24no-car/cbmemc: Fix compilationVladimir Serbinenko
the part !CAR && PRE_RAM is obviously meant as dummies. Unfortunately cbmemc_tx_byte has wrong number of arguments and hence causes compilation failure. Found out when compiling for vexpress-a9. Change-Id: Ic84d142bac5c455c2371fbc9439c898de04a974e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4267 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-11-10console: Add hexdump32 functionMarc Jones
Add a function to display memory locations in the console logfile. Change-Id: Iddb8d2e7a24357075f32c2fdf7916ae7a732247d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4013 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-05usbdebug: Fix build for ROMCC boardsKyösti Mälkki
Header file is not compatible with romcc, just drop it as a romstage built with romcc cannot use usbdebug anyway. Change-Id: If7f8f22d6a8fa1f02157df281f82f02b72b6a609 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4006 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-21ROMCC boards: Fix builds with CBMEM console, timestamps or usbdebugKyösti Mälkki
These features depend on CAR_GLOBAL region, which is not available when romstage is built with ROMCC. Exclude these from romstage, keep them available for ramstage. A follow-up patch will fix the dependencies and allows enabling these features in menuconfig. Change-Id: I9de5ad41ea733655a3fbdc734646f818e39cc471 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3919 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-11include: Fix spellingMartin Roth
Change-Id: Iadc813bc8208278996b2b1aa20cfb156ec06fac9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3755 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Separate the early console (romstage) from the bootblock console.Gabe Black
It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10Get rid of MAXIMUM_CONSOLE_LOGLEVEL; compile all messages into the coreboot ↵Ronald G. Minnich
binary This option has never had much if any use. It solved a problem over 10 years ago that resulted from an argument over the value or lack thereof of including all the debug strings in a coreboot image. The answer is in: it's a good idea to maintain the capability to print all messages, for many reasons. This option is also misleading people, as in a recent discussion, to believe that log messges are controlled at build time in a way they are not. For the record, from this day forward, we can print messages at all log levels and the default log level is set at boot time, as directed by DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and if you are having trouble override it in CMOS and get more messages. Besides, a quick glance shows it's always set to max (9 in this case) in the very few cases (1) in which it is set. Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3188 Tested-by: build bot (Jenkins)
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-18spkmodem consoleVladimir Serbinenko
Change-Id: Ie497e4c8da05001ffe67c4a541bd24aa859ac0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2987 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-23x86: expose console_tx_flush in romstageAaron Durbin
The vboot module relied on being able to flush the console after it called vtxprintf() from its log wrapper function. Expose the console_tx_flush() function in romstage so the vboot module can ensure messages are flushed. Change-Id: I578053df4b88c2068bd9cc90eea5573069a0a4e8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-08console: Only print romstage messages with EARLY_CONSOLE enabled.Hung-Te Lin
Revise console source file dependency (especially for EARLY_CONSOLE) and interpret printk/console_init according to EARLY_CONSOLE setting (no-ops if EARLY_CONSOLE is not defined). Verified to boot on x86/qemu and armv7/snow. Disabling EARLY_CONSOLE correctly stops romstage messages on x86/qemu (armv7/snow needs more changes to work). Change-Id: Idbbd3a26bc1135c9d3ae282aad486961fb60e0ea Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2300 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>