| Age | Commit message (Collapse) | Author |
|---|
|
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It was originally designed such that if usbdebug_init() was called
before cbmem_initialize(), it would fetch the already-initialized
state from CBMEM. This changed when cbmem_find() behaviour changed
to require cbmem_initialize() to be called first. As a result,
ramstage had to reinitialize all of the EHCI controller and USB
endpoints on entry. This was slow, specially with AMD hardware
where one can scan USB ports to probe for the debug dongle.
For postcar and ramstage, move usbdebug entry such that it is
triggered from CBMEM_INIT_HOOK instead of console_init().
Side-effect of this is usbdebug console shows 'coreboot-xxx ...
starting...' line only for romstage.
Initialisation for usbdebug is never done in postcar. If you have
USBDEBUG_IN_ROMSTAGE=n, postcar will not have console output on
usb either.
While at it, fix also some other __PRE_RAM__ cases to ENV_ROMSTAGE
and alike.
Change-Id: If8ab973321a801abc5529f3ff68c5dccae9512ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Call weak method die_notify.
The method should be overwritten in mainboard directory to signal that
a fatal error had occurred. On boards that do share the same EC and where
the EC is capable of controlling LEDs or a buzzer the method can be
overwritten in EC directory instead.
Tested on Lenovo T500.
Change-Id: I71f8ddfc96047e8a0d39f084588db1fe2f251612
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19696
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
New post codes are
POST_FSP_MEMORY_EXIT
POST_FSP_SILICON_EXIT
This patch will make it more consistent to debug FSP hang
and reset issues.
Bug=none
Branch=none
TEST=Build and Boot on eve
Change-Id: I93004a09c2a3a97ac9458a0f686ab42415af19fb
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: I3d0c61c37399e96c1d154c1d3af5c47db967a07a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19763
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: Ib92550fe755293ce8c65edf59242a2b04327128e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19332
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: line over 80 characters
Changed a few comments to reduce line length. File
src/include/cpu/amd/vr.h was skipped.
TEST=Build and run on Galileo Gen2
Change-Id: Ie3c07111acc1f89923fb31135684a6d28a505b61
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18687
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Comparisons should place the constant on the right side of the test
TEST=Build and run on Galileo Gen2
Change-Id: Id790e0034ea5c926fcaef95486319d6c0c936f28
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18682
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: please, no space before tabs
TEST=Build and run on Galileo Gen2
Change-Id: If60a58021d595289722d1d6064bea37b0b0bc039
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18652
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error found by checkpatch.pl:
ERROR: Macros with complex values should be enclosed in parentheses
False positives are detected for attribute macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define BOOT_STATE_INIT_ATTR __attribute__ ((used, section
(".bs_init")))
False positive also generated for macros for linker script files. An
example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define CBFS_CACHE(addr, size) \
+ REGION(cbfs_cache, addr, size, 4) \
+ ALIAS_REGION(cbfs_cache, preram_cbfs_cache) \
+ ALIAS_REGION(cbfs_cache, postram_cbfs_cache)
False positives generated for assembly code macros. An example is:
ERROR: Macros with complex values should be enclosed in parentheses
+#define DECLARE_OPTIONAL_REGION(name) asm (".weak _" #name ", _e" #name
)
False positive detected when macro includes multiple comma separated
values. The following code is from src/include/device/azalia_device.h:
#define AZALIA_SUBVENDOR(codec, val) \
(((codec) << 28) | (0x01720 << 8) | ((val) & 0xff)), \
(((codec) << 28) | (0x01721 << 8) | (((val) >> 8) & 0xff)), \
(((codec) << 28) | (0x01722 << 8) | (((val) >> 16) & 0xff)), \
(((codec) << 28) | (0x01723 << 8) | (((val) >> 24) & 0xff))
TEST=Build and run on Galileo Gen2
Change-Id: I6e3b6950738e6906851a172ba3a22e3d5af1e35d
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18649
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
TEST=Build and run on Galileo Gen2
Change-Id: I297bfc3d03dc95b471d3bb4b13803e81963841b5
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18647
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Messages from AGESA proper are additionally controlled
by various IDS parameters in board/OptionsIds.h file.
Change-Id: I83e975d37ad2bdecb09c483ecae71c0ed6877731
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18545
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The end of firmware notification is currently not being tracked
so it's hard to get good data on how long it takes. Update the
code to provide timestamp data as well as post codes.
BUG=chrome-os-partner:56656
Change-Id: I74c1043f2e72d9d85b23a99b8253ac465f62a7f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17373
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
|
|
Implement postcar stage cbmem console support. The postcar stage
is more like ramstage in that RAM is already up. Therefore, in
order to make the cbmem console reinit flow work one needs the cbmem
init hook infrastructure in place and the cbmem recovery called.
This call is added to x86/postcar.c to achieve that. Additionally,
one needs to provide postcar stage cbmem init hook callbacks for
the cbmem console library to use. A few other places need to
become postcar stage aware so that the code paths are taken.
Lastly, since postcar is backed by ram indicate that to the
cbmem backing store.
BUG=chrome-os-partner:57513
Change-Id: I51db65d8502c456b08f291fd1b59f6ea72059dfd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16619
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The declarations for console_init() were unconditionally
exposed even though there is a Kconfig option. Correct this
by honoring the CONFIG_POSTCAR_CONSOLE condition.
BUG=chrome-os-partner:57513
Change-Id: Id45ae3d7c05a9f4ebcf85c446fc68a709513bb0f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16617
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic8ffd26e61c0c3f27872699bb6aa9c39204155b7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16390
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
CONFIG_VBOOT was recently moved to be independent from CONFIG_CHROMEOS.
Change the code guard for do_printk_va_list() accordingly, since it's
used by vboot (not Chrome OS) code.
Change-Id: I44e868d2fd8e1368eeda2f10a35d0a2bd7259759
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16230
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add write line routine which is called indirectly by FSP.
TEST=Build and run on Galileo Gen2.
Change-Id: Idefb6e9ebe5a2b614055dabddc1882bfa3bba673
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16127
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I4d529f6393937e5b97d8546f9348b44a448330e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/16007
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a Kconfig value to enable the console during postcar. Add a call
to console_init at the beginning of the postcar stage in exit_car.S.
TEST=Build and run on Galileo Gen2
Change-Id: I66e2ec83344129ede2c7d6e5627c8062e28f50ad
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/16001
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id40c1bf868820c77ea20146d19c6d552c2f970c4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15942
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Build the UART drivers for the postcar stage.
TEST=Build and run on Galileo Gen2
Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15843
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I72f894fd14bf0e333d9fda970397a3c82de598c3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15121
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allow the platform to override the input clock divider by adding the
uart_input_clock_divider routine. This routine combines the baud-rate
oversample divider with any other input clock divider. The default
routine returns 16 which is the standard baud-rate oversampling value.
A platform may override this default "weak" routine by providing a new
routine and selecting UART_OVERRIDE_INPUT_CLOCK_DIVIDER. This works
around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Ieb6453b045d84702b8f730988d0fed9f253f63e2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- occured -> occurred
- accomodate -> accommodate
- existant -> existent
- asssertion -> assertion
- manangement -> management
- cotroller -> controller
Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add post codes for the various FSP phases and use them as appropriate
in FSP 1.0 and 1.1 implementations.
This will make it more consistent to debug FSP hangs and resets.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados and chell
Change-Id: I32f8dde80a0c6c117fe0fa48cdfe2f9a83b9dbdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3b616ff3c9d8b6d05c8bfe7f456f5c189e523547
Original-Change-Id: I081745dcc45b3e9e066ade2227e675801d6f669a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313822
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The conditions in cbmem console for supporting verstage
were implicitly utilizing CONFIG_BOOTBLOCK_CONSOLE to handle
the cbmem console enablement. Fix it so verstage is a first
class citizen for deciding actions pertaining to cbmem console.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados using verstage. cbmem console
shows verstage output.
Change-Id: Iba79efd1c1d4056f1a105a5e10ffc95f3e69b597
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11820
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The proper log level for any given printk statement is up to the
interpretation of the developer. This results in console output with
somewhat inconsistent levels of verbosity. This patch clearly defines each
log level and its use case, hopefully resulting in less ambiguity for
developers.
The concern with this patch might be that it leaves a lot of preexisting
printk statements using a log level that is inconsistent with the
description. I think that *most* statements map to these extended
definitions very nicely. The most discrepancies are between debug and
spew, but I'm willing to say that 95% of statements with a level lower than
debug are correct by these definitions.
There was some discussion dating back to 2010 on the mailing list about
renaming these constants to lose the 'BIOS_' prefix and to consolidate
some of them into a single constant. I disagree that it is necessary
to merge any of them, I think they all have unique use cases. But I do
think that if you all agree with these definitions, it might be useful to
rename them to reflect their use cases.
I also will add that I believe removing BIOS_NEVER is a good idea. I do
not see the use case, and it's used in only 4 files.
Change-Id: I8aefdd9dee4cb4ad2fc78ee7133a93f8ddf0720b
Signed-off-by: Nicky Sielicki <nlsielicki@wisc.edu>
Reviewed-on: http://review.coreboot.org/10444
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The __console attribute as well as linker binding
was dropped at some point. Kill of the dead code and
infrastructure.
Change-Id: I15e1fb4468fffe2e148ec9ac8539dfd958551807
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10279
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Add necessary checks and objects for secmon serial console.
Change-Id: Ibafa19061255ef6847a424922565a866328ff34c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10197
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
verstage previously lacked serial console support.
Add the necessary objects and macro checks to allow
verstage to include the serial console.
Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The name is more consistent with what we have elsewhere,
and the callsite didn't build at all (with vboot enabled)
Change-Id: I3576f3b8f737d360f68b67b6ce1683199948776d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10096
Tested-by: build bot (Jenkins)
|
|
The new function can be compiled in only when serial console is
disabled.
When invoked, this function initializes the serial interface and dumps
the contents of the CBMEM console buffer to serial output.
BRANCH=none
BUG=chromium:475347
TEST=compiled for different platforms with and without serial console
enabled. No actual test of this function yet.
Change-Id: Ia8d16649dc9d09798fa6970f2cfd893438e00dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a38a8254dd788ad188ba2509b9ae117d6f699579
Original-Change-Id: Ib85759a2727e31ba1ca21da7e6c346e434f83b52
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9984
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Kconfig options pertaining cbmem console in the preram
environment no longer make sense with the linker script
changes. Remove them and their usage within cbmem_console.
Change-Id: Ibf61645ca2331e4851e748e4e7aa5059e1192ed7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9851
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Coreboot is designed to have a single serial console at most, on top
of that it may have a CBMEM (virtual) console. Matters are complicated
by the fact that console interface is different between bootblock and
later stages.
A linker list of console driver descriptors is used to allow to
determine the set and type of console drivers at compile time. Even
though the upstream seems to have done away with this approach, which
does not seem the best idea.
As an alternative this patch introduces a common wrapper which
different UART drivers can plug in into. The driver exports a single
API which can be used both directly (in bootblock) and through the
wrapper (in later stages).
The existing drivers can be adjusted to fit this scheme one by one.
The common UART driver API also aligns fine with the upstream
approach.
BUG=chrome-os-partner:27784
TEST=none yet
Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196660
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Reviewed-on: http://review.coreboot.org/7872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Make compilation fail if this is included in non-romcc compiles.
I am a bit surprised that this ever compiled.
Change-Id: I8dfc1229681819d2381821a0195a89b44dd76b6a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8420
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can
do CBMEM console in bootblock and romstage. Kconfig forces it to zero
if _BASE is unset or we cannot do CAR migration on x86.
Add CBMEM console to bootblock, except for x86. Only one of bootblock
and romstage clears the pre-RAM buffer.
To start with empty console log on S3 wakeup, ramstage now clears
previous contents of CBMEM buffer if there was no pre-RAM buffer.
Unify Kconfig variable naming.
TODO: ARM configurations do not define PRERAM_BUFFER_BASE values.
Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7862
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*.
Back in the day, like more than half a decade ago, we migrated a lot
of boards to printk, but we never cleaned up the existing code to be
consistent. Instead, we worked around the problem with a very messy
console.h (nowadays the mess is hidden in romstage_console.c and
early_print.h)
This patch cleans up the generic code pieces to use printk() on all
non-ROMCC boards.
Our two remaining ROMCC boards are fixed up in this commit:
bifferos/bifferboard and dmp/vortex86ex.
Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8115
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Join doxygen file command with the file description
- Give extended file location so doxygen knows which early_sbmus.h
the file is. (I don't get this either, but it fixes the warning)
Change-Id: Ia91fb1ac1e9687e1a5a5cb5234696b3c24d4cd24
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8174
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
If the kernel does not properly handle the TPM and send it a
TPM_SaveState command before suspend then it will not be in
the correct state on resume. In order to easily detect this
case add a new post code for TPM failure and use it in the
vboot resume path.
BUG=chromium:371105
TEST=Build and boot on wtm2.
Original-Change-Id: I412520b521387a8e18ad1c6f5a64b39cdd5c88ec
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199371
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ff2f0dc56c1a783295710f81567af02729fe1da2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5baf894fd72922acd79d191e5485ae8ef7e0d559
Reviewed-on: http://review.coreboot.org/7936
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There is no need to call cbmemc_reinit() exclusively in romstage,
that is done as part of the CAR migration of cbmem_recovery().
CBMEM console for romstage remains disabled for boards flagged with
BROKEN_CAR_MIGRATE, but with this change it is possible to have it for
ramstage.
Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
We had lots of casts that caused warnings when compiling on RISCV.
Clean them up.
Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7066
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Connection of UARTs to GDB stub got lost in the console transition
process, bring it back. In theory, GDB stub should work also over
usbdebug, but that solution is not really tested at all yet.
Change-Id: I90e05e8132889e788b92e055ee191f35add43bbc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5343
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
We have means to easily disable a specific console in romstage if
necessary, so this global option makes little sense.
The option was initially introduced as a work-around for build issues
around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs.
Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5607
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The port for console remains to be a compile time constant.
The Kconfig option is changed to select an UART port with index
to avoid putting map of UART base addresses in Kconfigs.
With this change it is possible to have other than debug console
on different UART port.
Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5342
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Consoles on CBMEM and USB have somewhat complex rules and dependencies
when they can be active. Use simple variables to test which stage
of boot is being built for each console.
Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These are potentially useful with GDB or SerialICE too.
Also it reduces the amount of actual code we put in romcc_console.
Change-Id: Id8c56e979660ad9f4eef39c648f68c7ec60edfba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5339
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Console is arch-agnostic and there is no need for separate
implementations for romstage and ramstage.
For SMM there is console only if DEBUG_SMI is selected.
Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5338
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This framework was only available in ramstage. So we had to define
console output functions separately for bootblock, romstage and SMM.
Follow-up patches will re-enable all the consoles removed here,
in a more flexible fashion, and with less lines-of-code and copy-paste.
Also the driver list is not in a well-defined order and some of the
loops could exit without visiting all drivers.
NOTE: This build has no console in ramstage.
Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5337
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Do this for symmetry with romstage_console.c.
Change-Id: If17acfc3da07b1dbefa87162c3c7168deb7b354a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5330
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
No longer needed as wrap_putchar() survives SMM relocation to TSEG.
Change-Id: I6143844b0b9902ef63baf3e5781a5dc4f54234be
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5335
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
We do not need ROMCC support here and using wrappers for
console_tx_byte we can simplify this code.
Change-Id: I7f3b5acdfd0bde1d832b16418339dd5e232627e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This gives us completely transparent low-level function to transmit
data.
Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Do not expose console_tx_flush() to ChromeOS as that function
is part of lower-level implementation.
Change-Id: I1e31662da88a60e83f8e5d307a4b53441c130aab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5347
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I7bdc468bc3f74516abb2c583bdb5b6d7555d987c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5333
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Splitting the version prompt satisfies some requirements ROMCC
sets for the order in which we include source files. Also GDB
stub will need console hardware before entering main().
Change-Id: Ibb445a2f8cfb440d9dd69cade5f0ea41fb606f50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5331
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
None of the PCI bridge management here is specific to the PCI UART
device/function. Also the Kconfig variable defaults are not globally
valid, fill samsung/lumpy with working values.
Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5237
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Also fixes the reported baudrate to take get_option() into account.
Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5310
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Prepare low-level register access to take UART base address as a
parameter. This is done to support a list of base addresses defined
in the platform.
Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5309
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This preprocessor guard was used to disable CBMEM console from
romstage of ROMCC boards. It unintentionally disabled it for ARM
too as they do not have CACHE_AS_RAM selected.
Option EARLY_CBMEM_INIT implies CAR migration which is required
to have CBMEM console in romstage. This change should have been
done in commit f8bf5a10 already, but we missed it.
Change-Id: I03e95183be0e78bc7dd439d5fef5b10e54966dc3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5356
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
UARTs now have unified prototypes and can use a single entry
in the list of drivers for ramstage.
Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5308
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Existing code compiled serial communication and printk() for SMM
even when DEBUG_SMI was not selected.
Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5142
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
NOTE: UART base for SMM continues to be broken, as it does not use
the address resource allocator has assigned.
Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5235
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5234
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do not pull in console hw-specific prototypes everywhere
with console.h as those are not needed for higher levels.
Move prototypes for UARTs next to other consoles.
Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5232
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Struct dbgp_pipe would not be suitable for use with xHCI.
Just use an index, it is easy to setup in Kconfig if our
future debug setup has separate pipes for console
output and debugging/traceings.
Change-Id: Icbbd28f03113b208016f80217ab801d598d443a8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5227
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Needs printk and is not a console core function.
Change-Id: Id90a363eca133af4469663c1e8b504baa70471e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5155
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Read from USB endpoint_in 8 bytes at a time, the maximum what
EHCI debug port capability has to offer.
Change-Id: I3d012d758a24b24f894e587b301f620933331407
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4700
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Also prepare this console for use in romstage.
Change-Id: I26a4d4b5db1e44a261396a21bb0f0574d72aa86d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5136
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Also relocate and split header files, there is some interest
for EHCI debug support without PCI.
Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
If the firwmare is flashed and the MRC cache is blown away
then it is not possible to resume.
Right now this can be inferred from the event log but it can
be made very clear by adding a unique post code for this event.
1) boot falco
2) flash firmware
3) suspend and then resume
4) check for post code 0xef in log
0 | 2013-08-08 16:27:47 | Log area cleared | 4096
1 | 2013-08-08 16:27:47 | ACPI Enter | S3
2 | 2013-08-08 16:27:55 | System boot | 48
3 | 2013-08-08 16:27:55 | Last post code in previous boot | 0xef | Resume Failure
4 | 2013-08-08 16:27:55 | System Reset
5 | 2013-08-08 16:27:55 | ACPI Wake | S5
Change-Id: I7602d9eef85d3b764781990249ae32b84fe84134
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65259
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4458
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
It was suggested to eliminate the lock for sprintf. One way to do it is
to make the fake tx_byte into a closure. This patch allows it.
It's a bit tricky since we need to preserve compatibility with romcc.
Change-Id: I877ef0cef54dcbb0589fe858c485f76f3dd27ece
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4287
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that there is a clearly defined boot state machine
we can add some useful post codes to indicate the current
point in the state machine by having it log a post code
before the execution of each state.
This removes the currently defined POST codes that were
used by hardwaremain in favor of a new contiguous range
that are defined for each boot state.
The reason for this is that the existing codes are mostly
used to indicate when something is done, which is confusing
for actual debug because POST code debugging relies on knowing
what is about to happen (to know what may be at fault) rather
than what has just finished.
One additonal change is added during device init step as this
step often does the bulk of the work, and frequently logs POST
codes itself. Therefore in order to keep better track of what
device is being initialized POST_BS_DEV_INIT is logged before
each device is initialized.
interrupted boot with reset button and
gathered the eventlog. Mosys has been extended to
decode the well-known POST codes:
26 | 2013-06-10 10:32:48 | System boot | 120
27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize
28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0
29 | 2013-06-10 10:32:48 | Reset Button
30 | 2013-06-10 10:32:48 | System Reset
Change-Id: Ida1e1129d274d28cbe8e49e4a01483e335a03d96
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58106
Reviewed-on: http://review.coreboot.org/4231
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
One of the most common hangs during coreboot execution
is during ramstage device init steps. Currently there
are a set of (somewhat misleading) post codes during this
phase which give some indication as to where execution
stopped, but it provides no information on what device
was actually being initialized at that point.
This uses the new CMOS "extra" log banks to store the
encoded device path of the device that is about to be
touched by coreboot. This way if the system hangs when
talking to the device there will be some indication where
to investigate next.
interrupted boot with reset button and
gathered the eventlog after several test runs:
26 | 2013-06-10 10:32:48 | System boot | 120
27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize
28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0
29 | 2013-06-10 10:32:48 | Reset Button
30 | 2013-06-10 10:32:48 | System Reset
Change-Id: I6045bd4c384358b8a4e464eb03ccad639283939c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58105
Reviewed-on: http://review.coreboot.org/4230
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This can be used to indicate sub-state within a POST
code range which can assist in debugging BIOS hangs.
For example this can be used to indicate which device
is about to be initialized so if the system hangs
while talking to that device it can be identified.
Change-Id: I2f8155155f09fe9e242ebb7204f0b5cba3a1fa1e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58104
Reviewed-on: http://review.coreboot.org/4229
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
the part !CAR && PRE_RAM is obviously meant as dummies. Unfortunately
cbmemc_tx_byte has wrong number of arguments and hence causes compilation
failure.
Found out when compiling for vexpress-a9.
Change-Id: Ic84d142bac5c455c2371fbc9439c898de04a974e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4267
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add a function to display memory locations in the console
logfile.
Change-Id: Iddb8d2e7a24357075f32c2fdf7916ae7a732247d
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/4013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Header file is not compatible with romcc, just drop it as a romstage
built with romcc cannot use usbdebug anyway.
Change-Id: If7f8f22d6a8fa1f02157df281f82f02b72b6a609
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4006
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These features depend on CAR_GLOBAL region, which is not available
when romstage is built with ROMCC. Exclude these from romstage, keep
them available for ramstage.
A follow-up patch will fix the dependencies and allows enabling these
features in menuconfig.
Change-Id: I9de5ad41ea733655a3fbdc734646f818e39cc471
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3919
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Iadc813bc8208278996b2b1aa20cfb156ec06fac9
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/3755
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It might be that you want an early console in romstage before RAM is up, but
you can't or don't want to support the console all the way back in the
bootblock. By making the console in those two different environments
configurable seperately that becomes possible.
On the 5250 console output as early as the bootblock works, but on the 5420 it
only starts working in the ROM stage after clocks have been initialized.
Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3671
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
... and drop the wrapper on ARMv7
Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3639
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
binary
This option has never had much if any use. It solved a problem over 10
years ago that resulted from an argument over the value or lack thereof
of including all the debug strings in a coreboot image. The answer is
in: it's a good idea to maintain the capability to print all messages,
for many reasons.
This option is also misleading people, as in a recent discussion, to
believe that log messges are controlled at build time in a way they are
not. For the record, from this day forward, we can print messages at all
log levels and the default log level is set at boot time, as directed by
DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and
if you are having trouble override it in CMOS and get more messages.
Besides, a quick glance shows it's always set to max (9 in this case) in
the very few cases (1) in which it is set.
Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/3188
Tested-by: build bot (Jenkins)
|
|
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1]
made romcc not choke on function prototypes anymore. This
allows us to get rid of a lot of ifdefs guarding __ROMCC__ .
[1] http://review.coreboot.org/2424
Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3216
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ie497e4c8da05001ffe67c4a541bd24aa859ac0e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/2987
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The vboot module relied on being able to flush the console
after it called vtxprintf() from its log wrapper function.
Expose the console_tx_flush() function in romstage so the
vboot module can ensure messages are flushed.
Change-Id: I578053df4b88c2068bd9cc90eea5573069a0a4e8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2882
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
Revise console source file dependency (especially for EARLY_CONSOLE) and
interpret printk/console_init according to EARLY_CONSOLE setting (no-ops if
EARLY_CONSOLE is not defined).
Verified to boot on x86/qemu and armv7/snow. Disabling EARLY_CONSOLE correctly
stops romstage messages on x86/qemu (armv7/snow needs more changes to work).
Change-Id: Idbbd3a26bc1135c9d3ae282aad486961fb60e0ea
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2300
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
