| Age | Commit message (Collapse) | Author |
|---|
|
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port
is connected to a device with alternate mode(s) and the call is made
for the mode with the index higher than 0 (e.g. Zinger).
Cros EC manages alternative modes entered in an array (amode[]). The
command is designed to accept a query for an particular index and a
particular SVID.
Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries
first time for DisplayPort with index=0, EC says 'no' as expected.
AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00)
is sent instead because cmd_code is cleared by google_chromeec_command.
res.svid is supposed to be 0 when EC hits the last index + 1 but
res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because
EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to
the next index and this repeats forever.
Any USB-C device with non-DisplayPort alternate mode can cause this
hang unless HDMI port is used.
This patch resets all the fields of chromeec_command in each iteration
in case google_chromeec_command changes them.
BUG=b:78630899
BRANCH=none
TEST=Verify Fizz boots without monitors on Zinger. Verify the svid
enumeration happens as expected.
Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/25878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
google_chromeec_command() may only write the 1 or 2 bytes to
variable r (4 bytes). However, this api returns 4 bytes data.
To avaid returning the incorrect data, we need to initialize the
local variable.
BUG=b:76442548
BRANCH=none
TEST=write 2 bytes data into the flash, then, read by cbi_get_uint32
Change-Id: I3395c97ab6bfd7882d7728310de8a29041190e76
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/25460
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC needs to set the PPCM value depending on whether
Turbo is enabled or not, and the values differ between
Broadwell (0, 1) and Skylake (1, 2) platforms.
Change-Id: I662dce54415e685c054ffc00b6afde0f1f7765e2
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/25329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Update build so that we can get the board ID in bootblock.
BUG=b:74248569
TEST=build and boot grunt with follow-on patch.
Bayhub part is disabled.
Change-Id: I6353bcb4abcef4e8dc2b625082e33b73525c8525
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/25014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I12ae0d556c43d3d6537cac5d8f640e6a960101ae
Signed-off-by: Ben Pye <ben@curlybracket.co.uk>
Reviewed-on: https://review.coreboot.org/25017
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some type-c monitors do not immediately assert HPD. If we continue
to boot without HPD asserted, Depthcharge fails to show pictures
on a monitor even if HPD is asserted later.
Also, if an HDMI monitor is connected, no wait is needed. If only
an HDMI monitor is connected, currently the API always loops until
the stopwatch expires.
This patch will make the AP skip DisplayPort wait loop if it detects
an HDMI monitor. And if an HDMI monitor is not detected, the AP will
wait for DisplayPort mode (like before) but also its HPD signal.
This patch also extends the wait loop time-out to 3 seconds.
BUG=b:72387533
BRANCH=none
TEST=Verify firmware screen is displayed even when a type-c monitor
does not immediately assert HPD. Verify if HDMI monitor is connected,
AP does not wait (and firmware screen is displayed on HDMI monitor).
Change-Id: I0e1afdffbebf4caf35bbb792e7f4637fae89fa49
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Commit 1dfc2c3
[google/chromeec: Enable unified host event programming interface]
added support for UHEPI, but google_chromeec_is_uhepi_supported()
incorrectly treats negative error return codes from
google_chromeec_check_feature() as supported. Fix this check to only
treat positive return values as supported, as per the original intent.
Test: boot google/lulu, verify cbmem console reports UHEPI not
supported even if feature check returns error code, verify lid/kb
wake events correctly wakes the device from S3/sleep.
Change-Id: I7846efb340bc1546b074e8502daf906c444bd146
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/24982
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When clearing events from the EC, an error is returned when we try
to clear an event that doesn't exist. This is normal, but can
be distracting when trying to track down an error, so add a message
saying that the error is expected.
BUG=None
Test=Build Grunt with SMM debug enabled. See message before
"EC returned error result code 1".
Change-Id: Ib2e684e357e821c795de4b59658432c91a8d63fc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/24914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change removes extra newline characters from print statements for
wake masks.
Change-Id: I13cde76bfb0f10b1dda8117c27f2891e909f9669
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/23858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch syncs ec_commands.h with the one in chromeec.
BUG=b:70294260
BRANCH=none
TEST=Verify SKU_ID and OEM_ID are correctly recognized on Fizz.
Change-Id: I451ec9f6f9d7257915b7d4cb1e5adbee82d107de
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The google_chromeec_wait_for_display API checks whether a display is
ready or not. It waits in a loop until EC says it entered DisplayPort
alternative mode or times out in 2 seconds.
BUG=b:72387533
BRANCH=none
TEST=See 23746 "mb/google/fizz: Wait until display is ready"
Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The google_chromeec_pd_get_amode API checks whether TCPM is in a
specified alternate mode or not.
BUG=b:72387533
BRANCH=none
TEST=See 23746 "mb/google/fizz: Wait until display is ready"
Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Commit 07fe618 [chromeec: Add support for reading second battery info]
added a mutex as part of the ACPI code to determine battery statuses.
Windows is extremely picky about ACPI code, and attempting to acquire
a level 1 mutex without first having acquired a level 0 mutex causes
Windows to hang on boot. Since there's no reason to use a level 1
mutex here, change it to level 0.
Test: Boot Windows on device with ChromeEC without hanging
Change-Id: Icfb0817cfe0c49eb4527a12b507362939a6d32c6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/23697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For system without secondary battery, current DSDT will report warning
during build time. Add a conditional check to make sure only battery
index 0 can return success.
TEST=Build pass.
Change-Id: Iae12c5d1aa749948ef4025c8b5e60c97e1b747a5
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/23661
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We share the same shared memory fields for both batteries. When
the host wants to switch battery to read out, it will:
- Set BTID (EC_ACPI_MEM_BATTERY_INDEX) to the required index
- Wait for BITX (EC_MEMMAP_BATT_INDEX) to have the required value
- Then fetch the data
BRANCH=none
BUG=b:65697620
TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are
present, data is valid.
Change-Id: Ib06176e6ab4c45a899259f0917e6292121865ed6
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/23598
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch
OEM ID and SKU ID from cros EC.
CBI abbreviates Cros Board Info.
BUG=b:70294260
BRANCH=none
TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz.
Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/23549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The keyboard IRQ was changed to ExclusiveAndWake in order to support
waking from suspend-to-idle (S0ix) with commit
f611fcfacac5be14a51e04ae4d0b1e25cd5439c0 http://review.coreboot.org/11712
However this is triggering a kernel panic on Windows 10 because it
apparently does not like legacy device interrupts to to be set as
wake capable.
This change is no longer necessary because the linux kernel was
changed to always treat the keyboard as wake capable:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/input/serio/i8042.c?id=f13b2065de8147a1652b830ea5db961cf80c09df
Change-Id: I26e27de68095f8d176108f39312338522d7cfba0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/23563
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change decouples EC tablet event and TBMC device by guarding
TBMC definition and notification using EC_ENABLE_TBMC_DEVICE. It
allows mainboards to use tablet events without having to define a TBMC
device.
BUG=b:72554519
Change-Id: Ie38b6d68486e8e644dd0d6d406def3ae7fdb5152
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/23461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This change adds _PRW property to CREC device that allows Linux kernel
to identify CREC as a wakeup source.
BUG=b:69118395
TEST=Verified following steps:
1. Under sys devices for CREC: "echo enabled > wakeup"
2. Lid close/Lid open -- Verified that wakeup_count increases
3. Mode change -- Verified that wakeup_count increases
Change-Id: Ib0a687e171c7e5c81325b39f47c9a2462553fe3e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/23399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Unified Host Event Programming Interface (UHEPI) enables a unified host
command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events.
Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E,
0x8F) is supported for backward compatibility. But newer version of
BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT)
The UHEPI also enables the active and lazy wake masks. Active wake mask
is the mask that is programmed in the LPC driver (i.e. the mask that is
actively used by LPC driver for waking the host during suspended state).
It is same as the current wake mask that is set by the smihandler on host
just before entering sleep state S3/S5. On the other hand, lazy wake masks
are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set
the active wake mask depending upon the type of sleep that the host has
entered. This allows the host BIOS to perform one-time programming of
the wake masks for each supported sleep type and then EC can take care
of appropriately setting the active mask when host enters a particular
sleep state.
BRANCH=none
BUG=b:63969337
TEST=verify masks with ec hostevent command on S0,S3,S5 and S0ix
1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix
2). suspend_stress_test with S3 and S0ix
3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm
wake sources (Lid, power buttton and Mode change)
4). Verified "mosys eventlog list" in S5 resume to confirm wake sources
(Power Button)
5). Verified above scenarios with combination of Old BIOS + New EC and
New BIOS + Old EC
Change-Id: I4917a222c79b6aaecb71d7704ffde57bf3bc99d9
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://review.coreboot.org/21085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
PWRS is is the power source gnvs.
Notifying CPU is needed to change P- and C-states on these events.
Change-Id: I0818d10474523fb14f7ba7cfbf61166b89442083
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC does enable bluetooth on wifi cards and BDC at the same time.
Check the new Kconfig to support bluetooth on wifi in case no BDC
is installed and the BDC detection fails.
Change-Id: I23f14c937252a296dc543db49ec9e093e7e24604
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using Kconfig options USE_OPTION_TABLE, BOOTBLOCK_NORMAL makes the
bootblock to 4200 bytes, so the offsets of these blobs need to be put
at a lower address.
Change-Id: I8754e43ff318a03447633f7a9a8326d315328607
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/22978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This resolves the IASL remark:
dsdt.aml 2141: Method (\ISTR, 2, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
Change-Id: I36e814acc0746cb011b595493d8254f3fb73baf5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/21668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which
overrides the max input current and voltage when a barrel jack
adapter supplies power.
BUG=b:64442692
BRANCH=none
TEST=Boot Fizz. Use chgsup console command to verify the max
current and voltage are set as expected.
Change-Id: I8c6fc54e519ce13e3db82ee2cecaa96c6eb42d8a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch makes AP send EC_REBOOT_HIBERNATE_CLEAR_AP_OFF, which makes
EC clear AP_OFF flag then hibernate.
This is needed to make Chromebox boot when cr50 toggles the EC's reset
line after TURN_UPDATE_ON command.
BUG=b:69721737
BRANCH=none
CQ-DEPEND=CL:802632
TEST=Verify Fizz reboot after cr50 update.
Change-Id: I5f590286393ac21382cab64afdccae92d3fc14ba
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/22657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Merge the different coreboot table strapping ID structures into one
because they're really just all the same, and I want to add more. Make
the signature of the board_id() function return a uint32_t because
that's also what goes in the coreboot table. Add a printk to the generic
code handling strapping IDs in ramstage so that not every individual
mainboard implementation needs its own print. (In turn, remove one such
print from fsp1_1 code because it's in the way of my next patch.)
Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix a regression introduced by #21227 0709dc04
(ec/lenovo/h8/acpi/thermal: Add ACPI fan control).
The commit caused Windows to crash as EC reads aren't allowed in the fan
device or it's powerresource's methods. Implement the same approach as all
other platforms using a GNVS variable named FLVL instead of reading from EC.
In addition to EC reads writing to FIELD elements, in another ACPI scope,
seems to be broken. Introduce a new method to set the fan disengage mode.
Tested on Windows 7 and Lenovo T500.
Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Whenever there is a new EC event that could be wake-capable, notify
CREC device of this using notification value 0x2 i.e. device
wake. This allows Linux kernel to track active_count value correctly
for CREC device.
BUG=b:69118395
BRANCH=None
TEST=Verified on Soraka:
1. Put device into suspend
2. Wake up using mode change/lid open
3. Check that the active_count for GOOG0004 has increased
(cat wakeup_sources | grep GOOG0004)
Change-Id: I723f7f4e4c99e7a5b57c6296da66cf30cd413c27
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22625
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
ChromeEC is getting ready to bump up the hostevents and wake masks to
64-bits. The current commands to program hostevents/wake masks will
still operate on 32-bits only. A new EC host command will be added to
handle 64-bit hostevents/wake masks. In order to prevent individual
callers in coreboot from worrying about 32-bit/64-bit, the same API
provided by google/chromeec will be updated to accept 64-bit
parameters and return 64-bit values. Internally, host command handlers
will take care of masking these parameters/return values to
appropriate 32-bit/64-bit values.
BUG=b:69329196
Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add register HPPI and GSTS.
Add method WLSW that is used by thinkpad_acpi kernel module.
Seperate method by an empty newline.
Change-Id: I5a125047fad0e08cd9256bc53c3f5a7db7e56e7d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Sometimes (observed on Thinkpad T400s during cold boot) a few (only one
observed) garbage bytes may detained in the output queue of EC after power
up, and they should be cleared otherwise later communications will be
disrupted.
Change-Id: Id1733f7350232d0b10ac0d1bc912b62e7fa4da75
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22181
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
EC's output could be considered as a queue, and sometimes (observed on
Thinkpad T400s during cold boot) a few (only one observed) garbage bytes
may detained in such queue after power up. Those garbage bytes should be
checked and discarded first before real interactions, otherwise they may
disrupt the interaction during EC's enablement, causing a locked rfkill.
Change-Id: Iee031306c02f5211a4512c6b4ec90f7f0db196ae
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Disengage the fan 10 degree below passive threshold as the automatic EC fan
control does not disengage the FAN even when CPU starts melting ...
* Add EC registers FAND and FANA.
* Add ACPI methods _AC0 and _AL0.
* Add fan device and PowerResource for fan control.
Tested on Lenovo T430:
* The fan disengages at 80°C and keeps running at full speed until temperature
drops below 80°C.
* Fan can be disengaged using sysfs:
/sys/devics/virtual/thermal/cooling_device0/cur_state
Tested on Lenovo T500:
* The fan disengages at 80°C and keeps running at full speed until temperature
drops below 80°C.
* Fan cannot be disengaged using sysfs, but the current state can be read:
/sys/devics/virtual/thermal/cooling_device0/cur_state
Change-Id: I075ff5c69676927db1c5e731294e18796884f97e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21227
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI spec requires _TSP, _TC1, _TC2 and _PSL for passive cooling.
_TSP already has been added in a previous commit.
Copy the coefficients used on google devices to activate the feature.
Tested on Lenovo T430:
The CPU is throttled once the passive threshold has been reached.
Tested on Lenovo T500:
The CPU is throttled once the passive threshold has been reached.
Change-Id: I922923a9029de77158988ac254bab4aad9536935
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This commit just moves the vboot sources into
the security directory and fixes kconfig/makefile paths.
Fix vboot2 headers
Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add google_chromeec_get_usb_pd_power_info(), which will
call the EC_CMD_USB_PD_POWER_INFO host command to retrieve
the current and voltage info of the usb c charger.
Returns power info in watts.
BUG=b:37473486
BRANCH=None
TEST=output debug info to make sure that correct power
is returned.
Change-Id: Ie14a0a6163e1c2699cb20b4422c8062164d92076
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/21771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Earlier the EC expected the host to set appropriate masks before
reading host events. However, with recent change in EC, this is no
longer required. This change removes the setting of wake_mask before
and after reading the host events. However, in order to support older
versions of EC, a new feature flag is added on the EC side that
informs the host whether or not it is using the new way of reporting
host events without having to set wake mask.
CQ-DEPEND=CL:719578
TEST=Verified that EC wake events are correctly logged with both old
and new versions of EC.
Change-Id: Ib17e1296fb7d3bbc84fc7581fd0a9bd179ac87b9
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22006
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change makes google_chromeec_log_events available to callers
outside ec.c.
BUG=b:67874513
Change-Id: I36cc1e66e035eda707297d8153cd3fabeadfee45
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
EC maintains a FIFO of all MKBP events and sets host event whenever
a new entry is added to the FIFO. Clearing only the host event for
MKBP creates an inconsistent state where there are pending MKBP events
in the FIFO but host event for MKBP is cleared. In order to maintain a
consistent view, host should clear all MKBP events in the FIFO if host
event is being cleared.
This change drains out all the MKBP events in the FIFO when
clear_pending_events is called.
TEST=Verified by adding debug logs in EC to verify that all the MKBP
events that occur before clear_pending_events is called get cleared
from the FIFO.
Change-Id: I131722dc01608dff30230fe341e6b23ae4cc409e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds a new helper function google_chromeec_get_mkbp_event
that allows coreboot to query EC for the next available MKBP event.
Change-Id: Ia6d64586ca62378d08025c96c2689c00c816041f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
```
dsdt.aml 1461: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
```
Change-Id: Iaf9455b16b061b32248139a85890f49de7467261
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
mainboard_ec_init implemented by all x86-based mainboards using
chromeec performed similar tasks for initializing and recording ec
events. Instead of duplicating this code across multiple boards,
provide a library function google_chromeec_events_init that can be
called by mainboard with appropriate inputs to perform the required
actions.
This change also adds a new structure google_chromeec_event_info to
allow mainboards to provide information required by the library
function to handle different event masks.
Also, google_chromeec_log_device_events and google_chromeec_log_events
no longer need to be exported.
Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch removes checks that ensure EC to be in RO for recovery
boot. We do not need these checks because when recovery is requested
automatically (as opposed to manually), we show 'broken' screen where
users can only reboot the device or request recovery manually.
If recovery is requested, Depthcharge will check whether EC is in RO
or not and recovery switch was pressed or not. If it's a legitimate
manual recovery, EC should be in RO. Thus, we can trust the recovery
button state it reports.
This patch removes all calls to google_chromeec_check_ec_image,
which is called to avoid duplicate memory training when recovery
is requested but EC is in RW.
BUG=b:66516882
BRANCH=none
CQ-DEPEND=CL:693008
TEST=Boot Fizz.
Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Instead of duplicating the code across multiple mainboards, provide a
helper function to read boardid from Chrome EC.
Change-Id: I2008de7032bc880e90b2c3c385b2a67bfb8724cc
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Dump PMH7 revision and ID for diagnostic purposes.
Tested on Lenovo T430: PMH7: ID 05 Revision 12
Change-Id: I60d15a8f740aeb974a79b27507e974a730cec174
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
The ACPI spec requires devices with children to have an HID,
and Windows enforces this strictly. Without the SIO device
having an HID, Windows will not detect the attached PS2 keyboard
and trackpad. Therefore, add the proper HID.
TEST: boot Windows on google/stout, observe PS2 keyboard and
trackpad detected and functional.
Change-Id: I61d7341c15483f8e1fe0e485a25591ceb92eaae1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
ToString() requires the input buffer data to be null-terminated,
but the data returned by the EC is not, leading Windows to fail
to report any battery data at all. Correct this by concatenating
a null terminator (0x00) to the end of the buffer data before
inputting to ToString() where needed
TEST: boot Windows on google/stout, observe battery data
reported correctly.
Change-Id: I974afcd6ff1c617301d0897d6bd1fe14200aa3b9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
EC ACPI code is calculating the drain rate, but does not store it
in the battery status package before returning it. Correct this
omission, and set the drain rate to a preset minimum if calculated
value is less. Taken from vendor firmware ACPI dump.
Change-Id: I52837d5879112ab3103976bda28906fac8f880ec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
|
|
EC needs to have command to set SKU ID from APU to support
specific feature (ex: keyboard backlight) for variant board.
BUG=b:65359225
BRANCH=reef
TEST=emerge-snappy coreboot
Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/21504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Add support for detecting WWAN.
* Allows to turn off power to WWAN if no card is installed.
Add the following devicetree values:
* has_wwan_detection
Set to one to indicate that the following register are sane.
* wwan_gpio_num
SB GPIO num to read.
* wwan_gpio_lvl
SB GPIO level for card to be present (usually zero).
Don't enable WWAN power if no card is detected.
As there are no devicetree values yet, the new code doesn't have any effect.
Change-Id: Ie53275b384c85df8adf71fe79b3d54211c868756
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
* Add support for detecting BDC.
* Allows to turn off power to BDC if no card is installed.
* Should fix https://ticket.coreboot.org/issues/99 .
Add the following devicetree values:
* has_bdc_detection
Set to one to indicate that the following register are sane.
* bdc_gpio_num
SB GPIO num to read.
* bdc_gpio_lvl
SB GPIO level for card to be present (usually zero).
Don't enable BDC power if no card is detected.
As there are no devicetree values yet, the new code doesn't
have any effect.
Change-Id: I506de2eca4b820e6d82de6b2c48a5440462e1db5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
The EC side of the feature bits in ACPI EC space isn't stable yet, and
we're now going for matching them up with the EC host command of the
same purpose.
Change-Id: I9c1f0e5390e840ea0c32315a3da8eea6f3e12f54
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for board specific critical and passive
limits using GNVS table. Use default values if no
board specific limit exists.
* Add ACPI methods _TZP, _TSP and _PSV.
* Update ACPI method _CRT to use board specific if available.
Tested on Lenovo T500.
Change-Id: If438a909f4415f50cd7a764fb5fba7ec29599606
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This enables adding the backlight driver to boards that may or may not
come with a keyboard backlight function.
It's the responsibility of the EC to report if that feature exists, but
that's not a big extra burden given that it already keeps track of
everything else related to the backlight.
BUG=b:64705535
BRANCH=none
CQ-DEPEND=CL:620595
TEST=configured KBLE manually and noticed the presence/absence of
/sys/devices/platform/GOOG0002:00/ on a Chrome OS Linux kernel,
corresponding to the value reported by the EC.
Change-Id: Idc36bfaa6e69581ba19b52d37af6956f63cfdb8f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add two additional LED IDs.
Add Kconfig menu entries to allow selecting the action
to execute on death.
Overwrite weak die_notify method to notify user on death.
Flash all LEDs and play beep code 10 depending on Kconfig
options.
Successfully tested on:
Tested on Lenovo T500.
Tested on Lenovo X200.
Tested on Lenovo T430, but only LEDs are flashing.
Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8
Signed-off-by: Patrick Rudolph <siro@das-labor.org
Reviewed-on: https://review.coreboot.org/19695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Split `i2c.h` into three pieces to ease reuse of the generic defi-
nitions. No code is changed.
* `i2c.h` - keeps the generic definitions
* `i2c_simple.h` - holds the current, limited to one controller driver
per board, devicetree independent I2C interface
* `i2c_bus.h` - will become the devicetree compatible interface for
native I2C (e.g. non-SMBus) controllers
Change-Id: I382d45c70f9314588663e1284f264f877469c74d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:64468585
BRANCH=none
TEST=with the other sku-id related patches applied, coreboot obtains the
right SKU ID from EC
Change-Id: I82e324407b4b96495a3eb3d4caf110f9eae05116
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Our current struct for I2C segments `i2c_seg` was close to being compa-
tible to the Linux version `i2c_msg`, close to being compatible to SMBus
and close to being readable (e.g. what was `chip` supposed to mean?) but
turned out to be hard to fix.
Instead of extending it in a backwards compatible way (and not touching
current controller drivers), replace it with a Linux source compatible
`struct i2c_msg` and patch all the drivers and users with Coccinelle.
The new `struct i2c_msg` should ease porting drivers from Linux and help
to write SMBus compatible controller drivers.
Beside integer type changes, the field `read` is replaced with a generic
field `flags` and `chip` is renamed to `slave`.
Patched with Coccinelle using the clumsy spatch below and some manual
changes:
* Nested struct initializers and one field access skipped by Coccinelle.
* Removed assumption in the code that I2C_M_RD is 1.
* In `i2c.h`, changed all occurences of `chip` to `slave`.
@@ @@
-struct i2c_seg
+struct i2c_msg
@@ identifier msg; expression e; @@
(
struct i2c_msg msg = {
- .read = 0,
+ .flags = 0,
};
|
struct i2c_msg msg = {
- .read = 1,
+ .flags = I2C_M_RD,
};
|
struct i2c_msg msg = {
- .chip = e,
+ .slave = e,
};
)
@@ struct i2c_msg msg; statement S1, S2; @@
(
-if (msg.read)
+if (msg.flags & I2C_M_RD)
S1 else S2
|
-if (msg.read)
+if (msg.flags & I2C_M_RD)
S1
)
@@ struct i2c_msg *msg; statement S1, S2; @@
(
-if (msg->read)
+if (msg->flags & I2C_M_RD)
S1 else S2
|
-if (msg->read)
+if (msg->flags & I2C_M_RD)
S1
)
@@ struct i2c_msg msg; expression e; @@
(
-msg.read = 0;
+msg.flags = 0;
|
-msg.read = 1;
+msg.flags = I2C_M_RD;
|
-msg.read = e;
+msg.flags = e ? I2C_M_RD : 0;
|
-!!(msg.read)
+(msg.flags & I2C_M_RD)
|
-(msg.read)
+(msg.flags & I2C_M_RD)
)
@@ struct i2c_msg *msg; expression e; @@
(
-msg->read = 0;
+msg->flags = 0;
|
-msg->read = 1;
+msg->flags = I2C_M_RD;
|
-msg->read = e;
+msg->flags = e ? I2C_M_RD : 0;
|
-!!(msg->read)
+(msg->flags & I2C_M_RD)
|
-(msg->read)
+(msg->flags & I2C_M_RD)
)
@@ struct i2c_msg msg; @@
-msg.chip
+msg.slave
@@ struct i2c_msg *msg; expression e; @@
-msg[e].chip
+msg[e].slave
@ slave disable ptr_to_array @ struct i2c_msg *msg; @@
-msg->chip
+msg->slave
Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Copy from chrome-ec codebase, except for keeping the long-form license
header.
BUG=b:64468585
BRANCH=none
TEST=with the other sku-id related patches applied, coreboot obtains the
right SKU ID from EC
Change-Id: I513123547f3854945e827d2f7f6c0df6591886eb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/20945
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- let the coreboot build system insert the two blobs to the coreboot image
- EC and Super I/O initialization
- ACPI support
Tested on 2760p, 8460p, 2570p, 8470p.
Issue:
Kernel gives the following error:
ACPI Error: No handler for Region [ECRM] (...) [EmbeddedControl]
ACPI Error: Region EmbeddedControl (ID=3) has no handler
TODO:
- consider moving the Super I/O initialization code to ramstage, or
reuse the existing sio/smsc/kbc1100 code (if so, how to add the
additional kbc1126 specific functions to sio/kbc1100)
- sort out the ACPI code which is mostly from the ACPI dump of vendor
firmware
- find out why the digitizer in hp/2760p doesn't work
- GRUB payload freezing on all HP Elitebooks may be related to EC
Change-Id: I6b16eb7e26303eda740f52d667dedb7cc04b4ef0
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/19072
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Always enable tp-smapi and thermal managment.
The devicetree already configures the correct values. This patch makes
sure that invalid user-settings are ignored.
The tp-smapi bit is required for the SMM handler.
The thermal bit should be set to allow the EC to monitor thermal state
of the platform.
Change-Id: Ia5aa50e0b1148a7cc8e51480623368ee62edb849
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Returing FSL# for _STA causes Windows to BSOD. Re-work _STA to instead
return 0/1 based on FLVL, using google/beltino as a model.
Also correct serialization type for _CRS.
Change-Id: Ibf3af15bab3590f7c1c4401e1978dbcf2a495216
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for UAO AC only mode.
Needs tests on all platforms.
Change-Id: Ib52aab427ff687b00129024cde65b78060d21e32
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Add support for the new EC device event interface which is used to
report events from devices that are connected behind the EC.
This can be used to differentiate wake sources from the EC in the case
that the EC has the wake pins from various devices.
This can be used in case the AP is unable to directly wake from the
device itself, for example when using the Deep S3 state on Intel
platforms only a few pins can directly wake the AP.
BUG=b:30624430
TEST=build google/* boards that use chrome EC. Feature is used and
tested further in a subsequent commit.
Change-Id: I5126c6d6ffb6b0ef6e8db8dcd5aec62db925a371
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update this header from the upstream source so new host
commands can be used in coreboot.
https://chromium.googlesource.com/chromiumos/platform/ec
commit bbb759ceaa843f548f90c35d1668e17c8879bad3
BUG=b:30624430
TEST=build google/* and intel* boards
Change-Id: I56c9f891262d8984b6a9a69d96752c2dd6bb2371
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic2cdfa08cdae9f698eb2f8fa4c4ae061f1a7d903
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The 'set' field was not used anywhere. Replace the struct with a simple
integer representing the mask.
initializer updates performed with:
sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \
src/ec/*/*/ec.c
sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \
src/ec/*/*/ec_lpc.c \
src/superio/*/*/superio.c \
src/superio/smsc/fdc37n972/fdc37n972.c \
src/superio/smsc/sio10n268/sio10n268.c \
src/superio/via/vt1211/vt1211.c
src/ec/kontron/it8516e/ec.c was manually updated. The previous value for
IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and
had a zero bit in the middle of the mask.
Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-on: https://review.coreboot.org/20078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Myles Watson <mylesgw@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Test: boot OS (Ubuntu, Windows 10) on librem13v2, verify BT
function key toggle now works correctly.
Change-Id: I68dc99e72a09f7affbcd691d03dd4607a898313e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These Kconfig files had help text that was not indented further than
the 'help' keyword.
Change-Id: Ia9fdb22c0f5f0cec0c9d08aa6603b4ce8d60d9a3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
ToString() requires the input buffer data to be null-terminated,
but the data returned by the EC is not, leading Windows to fail
to report any battery data at all. Correct this by concatenating
a null terminator (0x00) to the end of the buffer data before
inputting to ToString() where needed
TEST: boot Windows on google/butterfly, observe battery data
reported correctly.
Change-Id: I395cc7fbdf26c8cc816e47107e552c0533580fa1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The IO region defined for EC_HOST_CMD_REGION1 was incorrectly
using EC_HOST_CMD_REGION0 for the range maximum so the region
was showing a minimum of 0x880 and a maximum of 0x800.
Both min and max should report the same value as this region
is fixed and cannot be relocated by the OS.
Change-Id: I387b1c36aa115e03d0c6f9939eb13c93b14ad909
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the
ThinkLight from the Operating System. This patch adds partial support for
that method, enough to enable or disable the ThinkLight:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
With the original BIOS the UCMS method exposes a wide range of values
through a generic /proc/acpi/ibm/cmos interface. With the changes suggested
in this patch that interface is also exposed but only accepts the commands
to enable or disable the ThinkLight; all other commands are ignored.
This change would potentially benefit all currently supported Thinkpad
models, I only have an X201 available for tests though.
Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/19644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Provide a common function to issue reboot commands to the EC.
Expose that function for external use and use it internal to
the module.
BUG=b:35580805
Change-Id: I1458bd7119b0df626a043ff3806c15ffb5446c9a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19573
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The EC may take very long for the first command on a cold boot (~180ms
witnessed). Since this needs an incredibly long timeout, we do this
single command manually.
Change-Id: I3302622a845ac6651bc7f563370d8f0511836f94
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18707
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I7b690d1f23ecf4083952c173be1d3a1246bc1593
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18706
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining a separate LID device for mainboards using
chromeec, define EC_ENABLE_LID_SWITCH for these boards.
Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18964
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since we want to support devices that do not have a lid but still use
EC, we need to conditionally check if referencing \_SB.LID0 is valid.
BUG=b:35775024
Change-Id: I92433460ec870fb07f48e67a6dfc61e3c036a129
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18941
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The Lenovo H8 battery interface uses a paged EC memory area.
Some Thinkpads (in particular the S230U) use a different EC controller
(ENE KB9012) with mostly compatible firmware, which requires an explicit
delay between writing the page register and reading the page data.
Change-Id: Iaeb8c4829efa29139396b519de803f10dd93f03f
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18348
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Old dock.c copied from x201 was incorrect. Do a rewrite of t60 dock
code as pnp devices.
Fixes USB and serial on the dock, if it is already connected when
computer is powered on. DVI and ethernet worked without this patch.
Hot-plug is yet to be fixed.
Change-Id: Ib20a0eff10d0cde92dd089baf4fca28b117dc999
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18054
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This is required to pass button information from EC to kernel without
using 8042 keyboard driver.
1. Define EC buttons device using GOOG0007 ACPI ID.
2. Guard enabling of this device using EC_ENABLE_MKBP_DEVICE.
BUG=b:35774934
BRANCH=None
TEST=Verified using evtest that kernel is able to get button
press/release information from EC.
Change-Id: I4578f16648305350d36fb50f2a5d2285514daed4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18641
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Currently, when using `iasl` 20140926-32 [Oct 1 2014] from Debian 8
(Jessie/stable), the build of the Lenovo X60 fails due to syntax errors.
ASL 2.0 supports `<<`. For consistency, right now, coreboot still uses
the old syntax. So use `ShiftLeft` instead, which also fixes the build
issue with older ASL compilers.
Change-Id: Id7e309c31612387da3920cf7d846b358ac2bdc71
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18520
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
thinkpad_acpi expects a SSMS method to turn on/off the mute LED
and a MMTS method to turn on/off the microphone mute LED. With
these methods implemented the driver can correctly sync the LEDs
with the corresponding statuses.
There seems to be two different bits to mute the audio in the
Lenovo H8 EC:
* AMUT, used internally (for example to disable the audio before
entering S3).
* ALMT, controllable by the OS, which also toggles the mute LED
(if present).
Tested on a X220T and on a X201.
Change-Id: I578f95f9619a53fd35f8a8bfe5564aeb6c789212
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18329
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
|
|
On the models that support it (like the X220) the LED pulses, on
the others (like the X201) the LED powers off.
Change-Id: I2ac7dbc30609179e4ca5fc0a7b06763431fe3344
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18325
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
thinkpad_acpi expects a MHKG method which returns the current
state of the tablet mode switch shifted left by 3. If such
method is not found, subsequent laptop/tablet mode events are
ignored.
Tested on a X220T.
Change-Id: Ic9ffea2ffe507b3692d1dd7411c52b813ec32146
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18328
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
This timeout is probably needed on all devices with Lenovo H8 embedded
controllers so set the default there.
Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18274
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
On my Thinkpad with an H8-compatible ENE KB9012 EC (GDHT92WW 1.52), when
the battery is nearly full and we switch from battery to AC by plugging
in the cable, the current rate will not drop to 0 immediately, but the
discharging state is cleared immediately.
This leads to the code trying to process an invalid rate value >0x8000,
leading to a displayed rate of >1000W.
This patch changes the logic to deal with these corner cases.
Change-Id: Ideb588d00757f259792e5ae97729e371b63a096c
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18349
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Not selecting the Kconfig option `GENERATE_SMBIOS_TABLES` the build
fails with the error below.
```
CC ramstage/ec/lenovo/h8/h8.o
src/ec/lenovo/h8/h8.c:201:2: error: unknown field 'get_smbios_strings' specified in initializer
.get_smbios_strings = h8_smbios_strings,
^
src/ec/lenovo/h8/h8.c:201:2: error: initialization from incompatible pointer type [-Werror]
src/ec/lenovo/h8/h8.c:201:2: error: (near initialization for 'h8_dev_ops.read_resources') [-Werror]
cc1: all warnings being treated as errors
```
So add the appropriate preprocessor guards to fix the build error.
Change-Id: I3baed452d422539a805c628a8c4a6a8c2a809317
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17770
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This fixes an issue on systems where the S3 state in the pm1 control
registers are not cleared when vboot determines recovery mode is
required on an S3 resume. The EC code will reboot the system knowing
that the EC was in RW. However, on subsequent entry into romstage the
S3 path will be taken and fails to recover cbmem -- forcing another
reboot. To work around that, signal to the platform a reboot is
happening and let the platform perform the necessary fix ups to the
register state.
BUG=chrome-os-partner:62627
Change-Id: Ic144b11b4968c92a1273b8d9eb9dc10f0056bf3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18295
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a new driver GOOG0006 to report tablet switch
to user space.
On glados based convertible, check that with a new kernel driver
(cros_ec_tbmc) that evtest collects tablet switch changes.
Change-Id: I6821eaac1feb6c182bc973aaa2f747e687715afb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/430951
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/18173
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
ToString() requires the input buffer data to be null-terminated,
but the data returned by the EC is not, leading Windows to fail
to report any battery data at all. Correct this by concatenating
a null terminator (0x00) to the end of the buffer data before
inputting to ToString() where needed
Change-Id: Ic86048d1d6354b9b0dac3c8957df318d0825c905
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17783
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The EC switches, including the hardware retrain flag, are
cleared when handing off the vboot state in romstage. However,
one may still want to query the state of the hardware retrain
flag. Thus, add a method to get the flag from cbmem.
BUG=chrome-os-partner:60592
BRANCH=reef
Change-Id: Ic76cfb3255a8d3c179d5f8b13fa13c518f79faa2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17869
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
ToString() requires the input buffer data to be null-terminated,
but the data returned by the EC is not, leading Windows to fail
to report any battery data at all. Correct this by concatenating
a null terminator (0x00) to the end of the buffer data before
inputting to ToString().
Change-Id: I4fdbf97e9b75030374dffc99a954dd9faa6a5209
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
ITE super-i/o chips need a fourth byte and have a special register
to exit config mode.
Change-Id: Ic40873649d567b87d3a937f2bf068649e67715de
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17286
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Normally firmware should have no business messing with the USB PD role
(source/sink/whatever) in the EC. But, as so often happens, ugly issues
crop up that require weird work-arounds, and before you know it you need
to do this for some reason that only makes sense in context. I do now,
so add this function to send the necessary host command in the simplest
possible fashion.
BRANCH=gru
BUG=chrome-os-partner:59346
TEST=Used it in a follow-up patch.
Change-Id: I07d40feafd6a8387a633d6384efb205baf578d76
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b71767caccff9b77d458182ce8066f7abf6321c
Original-Change-Id: Ie8d0be98f6b703f4db062fe2f728cd2588347202
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/413030
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://review.coreboot.org/17627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
