summaryrefslogtreecommitdiff
path: root/src/ec
AgeCommit message (Collapse)Author
2013-07-10ec: Add romstage function for checking and rebooting ECDuncan Laurie
Now that we are executing VbInit() in coreboot we can end up in a situation where the recovery reason is consumed during VbInit (end of romstage) and then the EC is rebooted to RO during ramstage EC init, thereby losing the recovery reason. Two possiblities are to remove the EC check+reboot from ramstage and let it happen in depthcharge. This however means that the system has to boot all the way into depthcharge and then reboot the EC and the system again. Instead if we do a check in romstage before VbInit() is called then we can reboot the EC into RO early and avoid booting all the way to depthcharge first. This change adds a ramstage version the EC init function and calls it from the shared romstage code immediately after the PCH decode windows are setup. Change-Id: I30d2a0c7131b8e4ec30c63eea36944ec111a8fba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3744 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10chrome ec: Update EC header from EC repositoryDuncan Laurie
- Updated ec_commands.h is copied in directly from EC repo - Removed "old" interface and update resources for "new" interface - Updated temp sensor constants and added "not calibrated" - Update mainboards to remove check for EC_SWITCH_KEYBOARD_RECOVERY Change-Id: Ic93c1914f86b6f5bc224178270624ed92b5c1e15 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec: Remove hardcoded GPI offset in EC SCIDuncan Laurie
With LynxPoint-LP the SCI GPE is no longer a GPIO that is offset by 16. Remove the Add and fix up the link definition so it is still accurate. Change-Id: I091141183a09345b5ffe28365583e48019f9f5e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec: Fix spellingMartin Roth
Change-Id: I5e4d35572c43f07bec5ec0bcd75c717723228e2f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3757 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ChromeEC: Fix the default, depends for EC_GOOGLE_CHROMEEC_I2C.Gabe Black
The default for this variable should be n, it should only depend on EC_GOOGLE_CHROMEEC, and it should be (and is) explicitly enabled when needed. This prevents it from being turned on when the EC bus is SPI. Change-Id: Idc6651a764be4f055341a36b9b4a58990f050b0c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3737 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-08Revert "Radio and dock support in EC on X60 and X201"Peter Stuge
This reverts commit 7d1ebbff5ad224591a2d1972737611f96a13145c Change-Id: I4a9d0cd31a3df3d1e092193953f334697ca65167 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3616 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-17pnp: Unify some alignment to ease autogenerating patchesNico Huber
Most PnP drivers align the initialization of their `device_operations` with spaces. Unify this, so next autogenerated patches always match the alignment. Change-Id: I3f6baef6c8bb294c136354754125ea88c07a61a1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3479 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Avoid tripping overheat alarm on X201 before ME bootsVladimir Serbinenko
Until ME boots (which takes seconds on X201) the reported temperature is 128 °C which triggers Linux overheat alarm which shuts down. Pretend temperature is 40°C until ME boots. Change-Id: Ia49fa03c6eb27f539a23711f2c8ebfde72b1dc18 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3404 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Make acpi/ec.c usable in romstageVladimir Serbinenko
On X201 to enable EHCI debug you need to go through EC if USB power is disabled so we need to inclue ec.c. Change-Id: I8f8b7de639ecaebceaa53cd338136befaeec8214 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3405 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Radio and dock support in EC on X60 and X201Vladimir Serbinenko
Enable UMTS on Lenovo X60 and X201. Enable radios if no options are available. Enable dock on Lenovo X201. Based on my X201 branch. Change-Id: I6e8d3bbd6a6b1a8e59473dd5cc8125a1583d75df Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-06ec/acpi: Add ACPI methods for generic EC accessNico Huber
Port most of the functions found in ec/acpi/ec.c to ACPI Source Language (ASL). These functions are used to control embedded controllers with the standard ACPI interface (mostly through i/o ports 0x62 / 0x66). The following methods are implemented and tested against the power managements channels of a ITE IT8516E embedded controller: * WAIT_EC_SC Wait for a bit in the EC_SC register * SEND_EC_COMMAND Send one command byte to the EC_SC register * SEND_EC_DATA Send one data byte to the EC_DATA register * RECV_EC_DATA Read one byte of data from the EC_DATA register * EC_READ Read one byte from ec memory (through cmd 0x80) * EC_WRITE Write one byte to ec memory (through cmd 0x81) To use the provided methods, one should include `ec/acpi/ec.asl` in the EC device code. Prior doing so, two macros should be defined to identify the used i/o ports: * EC_SC_IO I/o address of the EC_SC register * EC_DATA_IO I/o address of the EC_DATA register Change-Id: I8c6706075fb4980329c228e5b830d5f4e9b188dd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3285 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-06ec/kontron/it8516e: Add it8516e EC driverNico Huber
This driver communicates with the IT8516e on the Kontron KTQM77. Since we don't know if the firmware and protocol are standard for the chip or customized to the board, call it kontron/it8516e. Change-Id: I7382172c6d865d60106c929124444821a07a5184 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-18ChromeEC: Drop unneeded Kconfig variable EC_GOOGLE_API_ROOTStefan Reinauer
This used to contain the path for the EC include files, but those files are included in coreboot now. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I4fce9831c5e21b0a69a6295dbda2580e1ca83369 Reviewed-on: https://gerrit.chromium.org/gerrit/47606 Reviewed-by: Randall Spangler <rspangler@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3057 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16ec/google: Move plug-n-play initialization to LPC protocol.Hung-Te Lin
"Plug-n-play" is not supported on all platforms using Google's Chrome EC. For example, EC on I2C bus will need explicit configuration and initialization. So move the plug-n-play initialization to the LPC implementation. Verified by building Google/Link (with EC/LPC) successfully. Change-Id: I49e5943503fd5301aa2b2f8c1265f3813719d7e3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3089 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-16ec/google: Support Google's Chrome EC on I2C interface.Hung-Te Lin
Google's Chrome EC can be installed on LPC or I2C bus, using different command protocol. This commit adds I2C support for devices like Google/Snow. Note: I2C interface cannot be automatically probed so the bus and chip number must be explicitly set. Verified by booting Google/Snow, with following console output: Google Chrome EC: Hello got back 11223344 status (0) Google Chrome EC: version: ro: snow_v1.3.108-30f8374 rw: snow_v1.3.128-e35f60e running image: 1 Change-Id: I8023eb96cf477755d277fd7991bdb7d9392f10f7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3074 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-12ec/google: Isolate EC bus protocol implementation.Hung-Te Lin
The Chrome EC can be connected by different types of bus like LPC / I2C / SPI, and the current implementation is only for LPC. To support other types, we must first isolate the LPC protocol stuff and add configuration variable (EC_GOOGLE_CHROMEEC_LPC) to specify bus type. Verified by building google/link (with chromeec) configuration successfully. Change-Id: Ib2920d8d935bcc77a5394e818f69e9265e26e8a0 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3068 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14Support ITE IT8518 embedded controller running Quanta's firmwareStefan Reinauer
Change-Id: Ib406b9d5005243d79eea5d2c0c6c86b5aa949891 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2721 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-22Add support for Google ChromeECStefan Reinauer
Google ChromeEC is an EC with completely open source firmware. See https://gerrit.chromium.org/gerrit/gitweb?p=chromiumos/platform/ec.git;a=summary for the EC firmware source code (aka more information about the ChromeEC) This patch adds support for the ChromeEC on coreboot's side. Great thanks to the ChromeEC team for this amazing work. It's another important milestone towards a free and open firmware stack on modern hardware. Change-Id: Iace78af9d291791d2f5f80ccca1587b418738cec Signed-off-by: Stefan Reinauer <reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2481 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-11Add support for "Butterfly" ChromebookStefan Reinauer
We're happy to announce coreboot support for the "Butterfly" Chromebook, a.k.a HP Pavilion Chromebook. More information at: http://www.google.com/intl/en/chrome/devices/hp-pavilion-chromebook.html This commit also includes support for the ENE KB3940Q embedded controller running on Quanta's firmware. Change-Id: I194f847a94005218ec04eeba091c3257ac459510 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2359 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-12-12Add support for ENE932 EC w/ Compal firmwareStefan Reinauer
Change-Id: I19b03139e7edfee6ff3e0bcef735bb36bfadc354 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2024 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-04Make the device tree available in the rom stageStefan Reinauer
We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Add EC component for SMSC MEC1308/1310Stefan Reinauer
Change-Id: I92109fb633a1a3090b4b1767dd119b8c8a1b5f81 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/828 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-31X60/T60: Add option to enable/disable bluetoothSven Schnelle
Change-Id: I9761a8a9a7cc708fe95169cb8b79b413b97ee523 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/598 Tested-by: build bot (Jenkins)
2011-12-14Lenovo X60/T60: add first_battery settingSven Schnelle
The EC allows to select the order in which batteries are (dis)charged. Make this setting available to the user. Change-Id: Id2a98192565419dbb53f3a7cf0b2c46b672a3ed8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/475 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-25Lenovo H8: Fix h8_set_audio_mute()Sven Schnelle
Logic is inverted (if argument is true, one would expect that mute is enabled) and the wrong bit was used (1 instead 0) Change-Id: I71133ba639f1fb0d3c3582f16211dd266a11cc64 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/334 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-20T60: Add support for Ultrabay Legacy I/O devices (40Y8122)Sven Schnelle
Those modules have basically the same Super I/O capabilities as the Docking station. Unfortunately, the Super I/O in the module shares the same I/O address as the Docking station, so we're not allowed to connect the LPC Docking Bus if such a module is present. To be able to detect this device and use it as early console for coreboot, we have to initialize the GPIO Controller before, as this device is detected via GPIO06. Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/282 Tested-by: build bot (Jenkins)
2011-08-19Lenovo H8: Always clear audio muteSven Schnelle
The mute bit is set by ACPI before poweroff/going to suspend. So clear it after resume, to have working volume control even if the ACPI doesn't clear it on resume. OSPM should control Audio mute with ec bit 0x30:6, so it is safe to clear this bit even if the user has audio muted. Change-Id: I18bebe532bf21cfb61b3d294a396bf15012f9f1a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/162 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2011-06-23T60: undock on external power lossSven Schnelle
If power is unplugged/lost, we should undock the docking station. The power loss can also be caused by the fact that the user removed the thinkpad from the docking station without pressing the Undock button/hotkey first. Without undocking it on this event, the thinkpad LPC switch will still connect the Docking connector, which causes crashes when docking it again. Change-Id: I9ed783e491827bde20264868eab2b3a79c232922 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/62 Tested-by: build bot (Jenkins)
2011-06-22H8: add missing License HeaderSven Schnelle
Change-Id: If472e1e8bb93d64cc52a9084ad33fb9abbf0fb33 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/56 Tested-by: build bot (Jenkins)
2011-06-22PMH7: add missing License HeaderSven Schnelle
Change-Id: I3468689408fce05142a0959d5d725bdbd03faea7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/55 Tested-by: build bot (Jenkins)
2011-06-16Lenovo H8 EC: add usb_power_enable()Sven Schnelle
Can be used to disable/enable Power output on USB ports. Change-Id: I5eb52b33c9e3359b0e5874bda2c0c8d75c196bc2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/37 Tested-by: build bot (Jenkins)
2011-06-12log ec data with DEBUG_SPEWSven Schnelle
Change-Id: I26424e80c776bfc134528f42e87fde42d6a13108 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/28 Tested-by: build bot (Jenkins)
2011-06-09H8 EC: add volume CMOS settingSven Schnelle
Change-Id: I5332c8fa52556db34dfb5e772bf544f0323e823d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/12 Tested-by: build bot (Jenkins)
2011-06-07T60/PMH7: move 'touchpad' option to pmh7Sven Schnelle
This option is PMH7 specific, and should be moved there, so all Notebook utilizing a PMH7 have this option. For Thinkpads without Touchpad (like the X60), simply don't add 'touchpad' to cmos.layout. Change-Id: Icdd0093670d565f1b16e2483aa286f4d63ccc52a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/6 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-04-28Thinkpad: Enable Battery eventsSven Schnelle
Enable the following events for battery objects on Thinkpad X60/T60: 24: BAT0 critical 25: BAT1 critical 4A: BAT0 present 4B: BAT0 state change 4C: BAT1 present 4D: BAT1 state change Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27Lenovo PMH7: add pmh7_ultrabay_power_enable()Sven Schnelle
Can be used to enable/disable Ultrabay power on Thinkpads who control that with the PMH7. (i.e. T60) Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6546 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27Lenovo H8: add h8_ultrabay_device_present()Sven Schnelle
returns 1 if a CDROM/HDD device is plugging in the ultrabay. Return 0 if there's a battery or superio extensions plugged in. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Lenovo PMH7: add pmh7_touchpad_enable()Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6520 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-17Lenovo H8 EC: add missing systemstatus.asl includeSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6510 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-17PMH7: Add dock event controlSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6509 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-13Lenovo H8 EC: add missing include for thermal.aslSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6491 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-12Lenovo H8 EC: Set fancontrol to Automatic managementSven Schnelle
My Notebook gets far to hot without fan, so just enable automatic fan control by default. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6490 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11PMH7: Add chip configSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6486 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11EC: Add Lenovo H8Sven Schnelle
Move the EC support code from the X60 mainboard to a generic driver, as this EC is used in many thinkpads. Also move the ACPI code to this directory for this reason. This patch also adds a chip config, so that the initial setting for basic register can be specified in devicetree.cb Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-15ACPI EC: add ec_query functionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6447 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14ec/acpi: make ACPI register pair configurableSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-14ACPI EC: add ec_set_bit() / ec_clr_bit()Sven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6441 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-02pmh7.[ch]: Add missing license headers.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6328 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-01Properly add Lenovo EC to buildSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6326 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-01Add support for the Lenovo PMH7 embedded controllerSven Schnelle
Lenovo PMH7 (Power Management Hardware Hub) is found in most recent (starting with X60/T60 AFAIK) Lenovo/IBM Laptops. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Only add EC code if EC is selected in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6305 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Add new ec subdir for Embedded Controllers and common ACPI EC supportSven Schnelle
Adds a new src/ec subdir for embedded controllers (mostly found in laptops) and converts Getac P470 and Roda RK886EX to use the new ACPI EC instead of having their own copies of those functions. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6304 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 05:19:55 +0000