summaryrefslogtreecommitdiff
path: root/src/ec
AgeCommit message (Collapse)Author
2018-05-03ec/google/chromeec: Update Tablet event callMartin Roth
The tablet event handler method TPET is defined as an extern, then defined again in skylake, the only platform that supports it. In newer versions of IASL, this generates an error, as the method is defined in two places. Remove the extern and the CondRefOf check. That's not needed if we only set the EC_ENABLE_TABLET_EVENT define on platforms that have a TPET handler. Change-Id: I8bee069fc95637446593dfaaae1254e931421517 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-05-01chromeec platforms: Update ACPI thermal event handler callMartin Roth
Currently the thermal event handler method TEVT is defined as an extern, then defined again in platforms with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30cros-ec: Avoid infinitely looping in google_chromeec_pd_get_amodeDaisuke Nojiri
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port is connected to a device with alternate mode(s) and the call is made for the mode with the index higher than 0 (e.g. Zinger). Cros EC manages alternative modes entered in an array (amode[]). The command is designed to accept a query for an particular index and a particular SVID. Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries first time for DisplayPort with index=0, EC says 'no' as expected. AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00) is sent instead because cmd_code is cleared by google_chromeec_command. res.svid is supposed to be 0 when EC hits the last index + 1 but res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to the next index and this repeats forever. Any USB-C device with non-DisplayPort alternate mode can cause this hang unless HDMI port is used. This patch resets all the fields of chromeec_command in each iteration in case google_chromeec_command changes them. BUG=b:78630899 BRANCH=none TEST=Verify Fizz boots without monitors on Zinger. Verify the svid enumeration happens as expected. Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/25878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-01chromeec: fix an uninitialized local variableZhuohao Lee
google_chromeec_command() may only write the 1 or 2 bytes to variable r (4 bytes). However, this api returns 4 bytes data. To avaid returning the incorrect data, we need to initialize the local variable. BUG=b:76442548 BRANCH=none TEST=write 2 bytes data into the flash, then, read by cbi_get_uint32 Change-Id: I3395c97ab6bfd7882d7728310de8a29041190e76 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25460 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26ec/purism: Fix CPU Turbo value (PPCM) set by the ECYouness Alaoui
The EC needs to set the PPCM value depending on whether Turbo is enabled or not, and the values differ between Broadwell (0, 1) and Skylake (1, 2) platforms. Change-Id: I662dce54415e685c054ffc00b6afde0f1f7765e2 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-09ec/google/chromeec: Add boardid.c to bootblockMartin Roth
Update build so that we can get the board ID in bootblock. BUG=b:74248569 TEST=build and boot grunt with follow-on patch. Bayhub part is disabled. Change-Id: I6353bcb4abcef4e8dc2b625082e33b73525c8525 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-07ec/google/chromeec: Fix typo preventing PD EC firmware inclusionBen Pye
Change-Id: I12ae0d556c43d3d6537cac5d8f640e6a960101ae Signed-off-by: Ben Pye <ben@curlybracket.co.uk> Reviewed-on: https://review.coreboot.org/25017 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
Some type-c monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Also, if an HDMI monitor is connected, no wait is needed. If only an HDMI monitor is connected, currently the API always loops until the stopwatch expires. This patch will make the AP skip DisplayPort wait loop if it detects an HDMI monitor. And if an HDMI monitor is not detected, the AP will wait for DisplayPort mode (like before) but also its HPD signal. This patch also extends the wait loop time-out to 3 seconds. BUG=b:72387533 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I0e1afdffbebf4caf35bbb792e7f4637fae89fa49 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-05ec/chromeec: Fix check for UHEPI supportMatt DeVillier
Commit 1dfc2c3 [google/chromeec: Enable unified host event programming interface] added support for UHEPI, but google_chromeec_is_uhepi_supported() incorrectly treats negative error return codes from google_chromeec_check_feature() as supported. Fix this check to only treat positive return values as supported, as per the original intent. Test: boot google/lulu, verify cbmem console reports UHEPI not supported even if feature check returns error code, verify lid/kb wake events correctly wakes the device from S3/sleep. Change-Id: I7846efb340bc1546b074e8502daf906c444bd146 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24982 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-02ec/google/chromeec: Add note before error messageMartin Roth
When clearing events from the EC, an error is returned when we try to clear an event that doesn't exist. This is normal, but can be distracting when trying to track down an error, so add a message saying that the error is expected. BUG=None Test=Build Grunt with SMM debug enabled. See message before "EC returned error result code 1". Change-Id: Ib2e684e357e821c795de4b59658432c91a8d63fc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/24914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-26ec/google/chromeec: Remove extra newline characters from printkFurquan Shaikh
This change removes extra newline characters from print statements for wake masks. Change-Id: I13cde76bfb0f10b1dda8117c27f2891e909f9669 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/23858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-17chromeec: Sync ec_commands.h for CBI tagsDaisuke Nojiri
This patch syncs ec_commands.h with the one in chromeec. BUG=b:70294260 BRANCH=none TEST=Verify SKU_ID and OEM_ID are correctly recognized on Fizz. Change-Id: I451ec9f6f9d7257915b7d4cb1e5adbee82d107de Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17chromeec: Add google_chromeec_wait_for_displayDaisuke Nojiri
The google_chromeec_wait_for_display API checks whether a display is ready or not. It waits in a loop until EC says it entered DisplayPort alternative mode or times out in 2 seconds. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-17chromeec: Add google_chromeec_pd_get_amodeDaisuke Nojiri
The google_chromeec_pd_get_amode API checks whether TCPM is in a specified alternate mode or not. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-12ec/chromeec: Fix battery ACPI mutex levelMatt DeVillier
Commit 07fe618 [chromeec: Add support for reading second battery info] added a mutex as part of the ACPI code to determine battery statuses. Windows is extremely picky about ACPI code, and attempting to acquire a level 1 mutex without first having acquired a level 0 mutex causes Windows to hang on boot. Since there's no reason to use a level 1 mutex here, change it to level 0. Test: Boot Windows on device with ChromeEC without hanging Change-Id: Icfb0817cfe0c49eb4527a12b507362939a6d32c6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-09chromeec: Fix ACPI compile warningLijian Zhao
For system without secondary battery, current DSDT will report warning during build time. Add a conditional check to make sure only battery index 0 can return success. TEST=Build pass. Change-Id: Iae12c5d1aa749948ef4025c8b5e60c97e1b747a5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23661 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07chromeec: Add support for reading second battery infoNicolas Boichat
We share the same shared memory fields for both batteries. When the host wants to switch battery to read out, it will: - Set BTID (EC_ACPI_MEM_BATTERY_INDEX) to the required index - Wait for BITX (EC_MEMMAP_BATT_INDEX) to have the required value - Then fetch the data BRANCH=none BUG=b:65697620 TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are present, data is valid. Change-Id: Ib06176e6ab4c45a899259f0917e6292121865ed6 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/23598 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-02-05ec/google: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch OEM ID and SKU ID from cros EC. CBI abbreviates Cros Board Info. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-02ec/google/chromeec: Remove wake flag from keyboard IRQDuncan Laurie
The keyboard IRQ was changed to ExclusiveAndWake in order to support waking from suspend-to-idle (S0ix) with commit f611fcfacac5be14a51e04ae4d0b1e25cd5439c0 http://review.coreboot.org/11712 However this is triggering a kernel panic on Windows 10 because it apparently does not like legacy device interrupts to to be set as wake capable. This change is no longer necessary because the linux kernel was changed to always treat the keyboard as wake capable: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/input/serio/i8042.c?id=f13b2065de8147a1652b830ea5db961cf80c09df Change-Id: I26e27de68095f8d176108f39312338522d7cfba0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23563 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-01-30chromeec: Decouple EC tablet event and TBMC deviceFurquan Shaikh
This change decouples EC tablet event and TBMC device by guarding TBMC definition and notification using EC_ENABLE_TBMC_DEVICE. It allows mainboards to use tablet events without having to define a TBMC device. BUG=b:72554519 Change-Id: Ie38b6d68486e8e644dd0d6d406def3ae7fdb5152 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-01-26ec/google/chromeec: Add _PRW property to CREC deviceFurquan Shaikh
This change adds _PRW property to CREC device that allows Linux kernel to identify CREC as a wakeup source. BUG=b:69118395 TEST=Verified following steps: 1. Under sys devices for CREC: "echo enabled > wakeup" 2. Lid close/Lid open -- Verified that wakeup_count increases 3. Mode change -- Verified that wakeup_count increases Change-Id: Ib0a687e171c7e5c81325b39f47c9a2462553fe3e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-01-17google/chromeec: Enable unified host event programming interfaceJenny TC
Unified Host Event Programming Interface (UHEPI) enables a unified host command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events. Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F) is supported for backward compatibility. But newer version of BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT) The UHEPI also enables the active and lazy wake masks. Active wake mask is the mask that is programmed in the LPC driver (i.e. the mask that is actively used by LPC driver for waking the host during suspended state). It is same as the current wake mask that is set by the smihandler on host just before entering sleep state S3/S5. On the other hand, lazy wake masks are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set the active wake mask depending upon the type of sleep that the host has entered. This allows the host BIOS to perform one-time programming of the wake masks for each supported sleep type and then EC can take care of appropriately setting the active mask when host enters a particular sleep state. BRANCH=none BUG=b:63969337 TEST=verify masks with ec hostevent command on S0,S3,S5 and S0ix 1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix 2). suspend_stress_test with S3 and S0ix 3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm wake sources (Lid, power buttton and Mode change) 4). Verified "mosys eventlog list" in S5 resume to confirm wake sources (Power Button) 5). Verified above scenarios with combination of Old BIOS + New EC and New BIOS + Old EC Change-Id: I4917a222c79b6aaecb71d7704ffde57bf3bc99d9 Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/21085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-17ec/h8: Store PWRS and notify CPU on AC power plug/unplug eventsArthur Heymans
PWRS is is the power source gnvs. Notifying CPU is needed to change P- and C-states on these events. Change-Id: I0818d10474523fb14f7ba7cfbf61166b89442083 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-12ec/lenovo/h8: Add support for bluetooth on wifiPatrick Rudolph
The EC does enable bluetooth on wifi cards and BDC at the same time. Check the new Kconfig to support bluetooth on wifi in case no BDC is installed and the BDC detection fails. Change-Id: I23f14c937252a296dc543db49ec9e093e7e24604 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-25ec/hp/kbc1126: change the default offset of the blobsIru Cai
Using Kconfig options USE_OPTION_TABLE, BOOTBLOCK_NORMAL makes the bootblock to 4200 bytes, so the offsets of these blobs need to be put at a lower address. Change-Id: I8754e43ff318a03447633f7a9a8326d315328607 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-19ec/hp/kbc1126/acpi/battery.asl: Make \ISTR serializedIru Cai
This resolves the IASL remark: dsdt.aml 2141: Method (\ISTR, 2, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) Change-Id: I36e814acc0746cb011b595493d8254f3fb73baf5 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-08chromeec: Add command to override charger limitDaisuke Nojiri
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which overrides the max input current and voltage when a barrel jack adapter supplies power. BUG=b:64442692 BRANCH=none TEST=Boot Fizz. Use chgsup console command to verify the max current and voltage are set as expected. Change-Id: I8c6fc54e519ce13e3db82ee2cecaa96c6eb42d8a Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08cr50: Make EC clear AP_OFF before hibnernateDaisuke Nojiri
This patch makes AP send EC_REBOOT_HIBERNATE_CLEAR_AP_OFF, which makes EC clear AP_OFF flag then hibernate. This is needed to make Chromebox boot when cr50 toggles the EC's reset line after TURN_UPDATE_ON command. BUG=b:69721737 BRANCH=none CQ-DEPEND=CL:802632 TEST=Verify Fizz reboot after cr50 update. Change-Id: I5f590286393ac21382cab64afdccae92d3fc14ba Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-03ec/lenovo/h8/acpi: Fix regression (MS Windows crash on boot)Patrick Rudolph
Fix a regression introduced by #21227 0709dc04 (ec/lenovo/h8/acpi/thermal: Add ACPI fan control). The commit caused Windows to crash as EC reads aren't allowed in the fan device or it's powerresource's methods. Implement the same approach as all other platforms using a GNVS variable named FLVL instead of reading from EC. In addition to EC reads writing to FIELD elements, in another ACPI scope, seems to be broken. Introduce a new method to set the fan disengage mode. Tested on Windows 7 and Lenovo T500. Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-11-30chromeec: Notify CREC device of wakeup eventsFurquan Shaikh
Whenever there is a new EC event that could be wake-capable, notify CREC device of this using notification value 0x2 i.e. device wake. This allows Linux kernel to track active_count value correctly for CREC device. BUG=b:69118395 BRANCH=None TEST=Verified on Soraka: 1. Put device into suspend 2. Wake up using mode change/lid open 3. Check that the active_count for GOOG0004 has increased (cat wakeup_sources | grep GOOG0004) Change-Id: I723f7f4e4c99e7a5b57c6296da66cf30cd413c27 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
ChromeEC is getting ready to bump up the hostevents and wake masks to 64-bits. The current commands to program hostevents/wake masks will still operate on 32-bits only. A new EC host command will be added to handle 64-bit hostevents/wake masks. In order to prevent individual callers in coreboot from worrying about 32-bit/64-bit, the same API provided by google/chromeec will be updated to accept 64-bit parameters and return 64-bit values. Internally, host command handlers will take care of masking these parameters/return values to appropriate 32-bit/64-bit values. BUG=b:69329196 Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-14ec/lenovo/h8/acpi/ec: Add registersPatrick Rudolph
Add register HPPI and GSTS. Add method WLSW that is used by thinkpad_acpi kernel module. Seperate method by an empty newline. Change-Id: I5a125047fad0e08cd9256bc53c3f5a7db7e56e7d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-11-07ec/lenovo/h8: Clear EC output queue before enablementBill XIE
Sometimes (observed on Thinkpad T400s during cold boot) a few (only one observed) garbage bytes may detained in the output queue of EC after power up, and they should be cleared otherwise later communications will be disrupted. Change-Id: Id1733f7350232d0b10ac0d1bc912b62e7fa4da75 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22181 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-07ec/acpi: add mechanisms to clear EC output queueBill XIE
EC's output could be considered as a queue, and sometimes (observed on Thinkpad T400s during cold boot) a few (only one observed) garbage bytes may detained in such queue after power up. Those garbage bytes should be checked and discarded first before real interactions, otherwise they may disrupt the interaction during EC's enablement, causing a locked rfkill. Change-Id: Iee031306c02f5211a4512c6b4ec90f7f0db196ae Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-04ec/lenovo/h8/acpi/thermal: Add ACPI fan controlPatrick Rudolph
Disengage the fan 10 degree below passive threshold as the automatic EC fan control does not disengage the FAN even when CPU starts melting ... * Add EC registers FAND and FANA. * Add ACPI methods _AC0 and _AL0. * Add fan device and PowerResource for fan control. Tested on Lenovo T430: * The fan disengages at 80°C and keeps running at full speed until temperature drops below 80°C. * Fan can be disengaged using sysfs: /sys/devics/virtual/thermal/cooling_device0/cur_state Tested on Lenovo T500: * The fan disengages at 80°C and keeps running at full speed until temperature drops below 80°C. * Fan cannot be disengaged using sysfs, but the current state can be read: /sys/devics/virtual/thermal/cooling_device0/cur_state Change-Id: I075ff5c69676927db1c5e731294e18796884f97e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21227 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04ec/lenovo/h8/acpi/thermal: Add support for passive coolingPatrick Rudolph
The ACPI spec requires _TSP, _TC1, _TC2 and _PSL for passive cooling. _TSP already has been added in a previous commit. Copy the coefficients used on google devices to activate the feature. Tested on Lenovo T430: The CPU is throttled once the passive threshold has been reached. Tested on Lenovo T500: The CPU is throttled once the passive threshold has been reached. Change-Id: I922923a9029de77158988ac254bab4aad9536935 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-20chromeec: Add function to retrieve usb c charger infoShelley Chen
Add google_chromeec_get_usb_pd_power_info(), which will call the EC_CMD_USB_PD_POWER_INFO host command to retrieve the current and voltage info of the usb c charger. Returns power info in watts. BUG=b:37473486 BRANCH=None TEST=output debug info to make sure that correct power is returned. Change-Id: Ie14a0a6163e1c2699cb20b4422c8062164d92076 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19google/chromeec: Do not set wake mask before logging EC eventsFurquan Shaikh
Earlier the EC expected the host to set appropriate masks before reading host events. However, with recent change in EC, this is no longer required. This change removes the setting of wake_mask before and after reading the host events. However, in order to support older versions of EC, a new feature flag is added on the EC side that informs the host whether or not it is using the new way of reporting host events without having to set wake mask. CQ-DEPEND=CL:719578 TEST=Verified that EC wake events are correctly logged with both old and new versions of EC. Change-Id: Ib17e1296fb7d3bbc84fc7581fd0a9bd179ac87b9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22006 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19ec/google/chromeec: Export google_chromeec_log_events in ec.hFurquan Shaikh
This change makes google_chromeec_log_events available to callers outside ec.c. BUG=b:67874513 Change-Id: I36cc1e66e035eda707297d8153cd3fabeadfee45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18google/chromeec: Drain all MKBP events while clearing host eventsFurquan Shaikh
EC maintains a FIFO of all MKBP events and sets host event whenever a new entry is added to the FIFO. Clearing only the host event for MKBP creates an inconsistent state where there are pending MKBP events in the FIFO but host event for MKBP is cleared. In order to maintain a consistent view, host should clear all MKBP events in the FIFO if host event is being cleared. This change drains out all the MKBP events in the FIFO when clear_pending_events is called. TEST=Verified by adding debug logs in EC to verify that all the MKBP events that occur before clear_pending_events is called get cleared from the FIFO. Change-Id: I131722dc01608dff30230fe341e6b23ae4cc409e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-18google/chromeec: Add new helper function to read MKBP eventsFurquan Shaikh
This change adds a new helper function google_chromeec_get_mkbp_event that allows coreboot to query EC for the next available MKBP event. Change-Id: Ia6d64586ca62378d08025c96c2689c00c816041f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-10ec/lenovo/h8: Serialize control method _CRSPaul Menzel
``` dsdt.aml 1461: Method (_CRS, 0) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ``` Change-Id: Iaf9455b16b061b32248139a85890f49de7467261 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-08ec/google/chromeec: Add library function google_chromeec_events_initFurquan Shaikh
mainboard_ec_init implemented by all x86-based mainboards using chromeec performed similar tasks for initializing and recording ec events. Instead of duplicating this code across multiple boards, provide a library function google_chromeec_events_init that can be called by mainboard with appropriate inputs to perform the required actions. This change also adds a new structure google_chromeec_event_info to allow mainboards to provide information required by the library function to handle different event masks. Also, google_chromeec_log_device_events and google_chromeec_log_events no longer need to be exported. Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-04chromeec: Remove checks for EC in RODaisuke Nojiri
This patch removes checks that ensure EC to be in RO for recovery boot. We do not need these checks because when recovery is requested automatically (as opposed to manually), we show 'broken' screen where users can only reboot the device or request recovery manually. If recovery is requested, Depthcharge will check whether EC is in RO or not and recovery switch was pressed or not. If it's a legitimate manual recovery, EC should be in RO. Thus, we can trust the recovery button state it reports. This patch removes all calls to google_chromeec_check_ec_image, which is called to avoid duplicate memory training when recovery is requested but EC is in RW. BUG=b:66516882 BRANCH=none CQ-DEPEND=CL:693008 TEST=Boot Fizz. Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-26chromeec: Provide helper routine to read boardid from Chrome ECFurquan Shaikh
Instead of duplicating the code across multiple mainboards, provide a helper function to read boardid from Chrome EC. Change-Id: I2008de7032bc880e90b2c3c385b2a67bfb8724cc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-25ec/lenovo/pmh7: Dump revision and IDPatrick Rudolph
Dump PMH7 revision and ID for diagnostic purposes. Tested on Lenovo T430: PMH7: ID 05 Revision 12 Change-Id: I60d15a8f740aeb974a79b27507e974a730cec174 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-19ec/quanta/it8518: add missing HID to SIO deviceMatt DeVillier
The ACPI spec requires devices with children to have an HID, and Windows enforces this strictly. Without the SIO device having an HID, Windows will not detect the attached PS2 keyboard and trackpad. Therefore, add the proper HID. TEST: boot Windows on google/stout, observe PS2 keyboard and trackpad detected and functional. Change-Id: I61d7341c15483f8e1fe0e485a25591ceb92eaae1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-19ec/quanta/it8518: correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString() where needed TEST: boot Windows on google/stout, observe battery data reported correctly. Change-Id: I974afcd6ff1c617301d0897d6bd1fe14200aa3b9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-19ec/purism/librem: fix battery present rateMatt DeVillier
EC ACPI code is calculating the drain rate, but does not store it in the battery status package before returning it. Correct this omission, and set the drain rate to a preset minimum if calculated value is less. Taken from vendor firmware ACPI dump. Change-Id: I52837d5879112ab3103976bda28906fac8f880ec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-13ec/google: Add command to set APU SKU ID to ECKevin Chiu
EC needs to have command to set SKU ID from APU to support specific feature (ex: keyboard backlight) for variant board. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-11ec/lenovo/h8: Add WWAN detection supportPatrick Rudolph
* Add support for detecting WWAN. * Allows to turn off power to WWAN if no card is installed. Add the following devicetree values: * has_wwan_detection Set to one to indicate that the following register are sane. * wwan_gpio_num SB GPIO num to read. * wwan_gpio_lvl SB GPIO level for card to be present (usually zero). Don't enable WWAN power if no card is detected. As there are no devicetree values yet, the new code doesn't have any effect. Change-Id: Ie53275b384c85df8adf71fe79b3d54211c868756 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-06ec/lenovo/h8: Add BDC detection supportPatrick Rudolph
* Add support for detecting BDC. * Allows to turn off power to BDC if no card is installed. * Should fix https://ticket.coreboot.org/issues/99 . Add the following devicetree values: * has_bdc_detection Set to one to indicate that the following register are sane. * bdc_gpio_num SB GPIO num to read. * bdc_gpio_lvl SB GPIO level for card to be present (usually zero). Don't enable BDC power if no card is detected. As there are no devicetree values yet, the new code doesn't have any effect. Change-Id: I506de2eca4b820e6d82de6b2c48a5440462e1db5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-08-30ec/google: Use feature flag layout that matches the EC host commandPatrick Georgi
The EC side of the feature bits in ACPI EC space isn't stable yet, and we're now going for matching them up with the EC host command of the same purpose. Change-Id: I9c1f0e5390e840ea0c32315a3da8eea6f3e12f54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-27ec/lenovo/h8/acpi/thermal: Don't hardcode limitsPatrick Rudolph
Add support for board specific critical and passive limits using GNVS table. Use default values if no board specific limit exists. * Add ACPI methods _TZP, _TSP and _PSV. * Update ACPI method _CRT to use board specific if available. Tested on Lenovo T500. Change-Id: If438a909f4415f50cd7a764fb5fba7ec29599606 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-22ec/google: Detect keyboard backlight at runtimePatrick Georgi
This enables adding the backlight driver to boards that may or may not come with a keyboard backlight function. It's the responsibility of the EC to report if that feature exists, but that's not a big extra burden given that it already keeps track of everything else related to the backlight. BUG=b:64705535 BRANCH=none CQ-DEPEND=CL:620595 TEST=configured KBLE manually and noticed the presence/absence of /sys/devices/platform/GOOG0002:00/ on a Chrome OS Linux kernel, corresponding to the value reported by the EC. Change-Id: Idc36bfaa6e69581ba19b52d37af6956f63cfdb8f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21ec/lenovo/h8: Add panic methodPatrick Rudolph
Add two additional LED IDs. Add Kconfig menu entries to allow selecting the action to execute on death. Overwrite weak die_notify method to notify user on death. Flash all LEDs and play beep code 10 depending on Kconfig options. Successfully tested on: Tested on Lenovo T500. Tested on Lenovo X200. Tested on Lenovo T430, but only LEDs are flashing. Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8 Signed-off-by: Patrick Rudolph <siro@das-labor.org Reviewed-on: https://review.coreboot.org/19695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15ec/google: Add command to fetch SKU ID from ECPatrick Georgi
BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I82e324407b4b96495a3eb3d4caf110f9eae05116 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-11ec/google: update ec_commands.hPatrick Georgi
Copy from chrome-ec codebase, except for keeping the long-form license header. BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I513123547f3854945e827d2f7f6c0df6591886eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20945 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-11ec: add support for KBC1126 in HP laptopsIru Cai
- let the coreboot build system insert the two blobs to the coreboot image - EC and Super I/O initialization - ACPI support Tested on 2760p, 8460p, 2570p, 8470p. Issue: Kernel gives the following error: ACPI Error: No handler for Region [ECRM] (...) [EmbeddedControl] ACPI Error: Region EmbeddedControl (ID=3) has no handler TODO: - consider moving the Super I/O initialization code to ramstage, or reuse the existing sio/smsc/kbc1100 code (if so, how to add the additional kbc1126 specific functions to sio/kbc1100) - sort out the ACPI code which is mostly from the ACPI dump of vendor firmware - find out why the digitizer in hp/2760p doesn't work - GRUB payload freezing on all HP Elitebooks may be related to EC Change-Id: I6b16eb7e26303eda740f52d667dedb7cc04b4ef0 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19072 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-18ec/lenovo/h8/h8: Always enable tp-smapi and thermalPatrick Rudolph
Always enable tp-smapi and thermal managment. The devicetree already configures the correct values. This patch makes sure that invalid user-settings are ignored. The tp-smapi bit is required for the SMM handler. The thermal bit should be set to allow the EC to monitor thermal state of the platform. Change-Id: Ia5aa50e0b1148a7cc8e51480623368ee62edb849 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-08ec/mec1308: Fix fan control ACPIMatt DeVillier
Returing FSL# for _STA causes Windows to BSOD. Re-work _STA to instead return 0/1 based on FLVL, using google/beltino as a model. Also correct serialization type for _CRS. Change-Id: Ibf3af15bab3590f7c1c4401e1978dbcf2a495216 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-07ec/lenovo/h8/smm: Support USB always on AC onlyPatrick Rudolph
Add support for UAO AC only mode. Needs tests on all platforms. Change-Id: Ib52aab427ff687b00129024cde65b78060d21e32 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-07-01ec/google/chromeec: Add support for EC device eventsDuncan Laurie
Add support for the new EC device event interface which is used to report events from devices that are connected behind the EC. This can be used to differentiate wake sources from the EC in the case that the EC has the wake pins from various devices. This can be used in case the AP is unable to directly wake from the device itself, for example when using the Deep S3 state on Intel platforms only a few pins can directly wake the AP. BUG=b:30624430 TEST=build google/* boards that use chrome EC. Feature is used and tested further in a subsequent commit. Change-Id: I5126c6d6ffb6b0ef6e8db8dcd5aec62db925a371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01ec/google/chromeec: Sync header with Chromium EC codebaseDuncan Laurie
Update this header from the upstream source so new host commands can be used in coreboot. https://chromium.googlesource.com/chromiumos/platform/ec commit bbb759ceaa843f548f90c35d1668e17c8879bad3 BUG=b:30624430 TEST=build google/* and intel* boards Change-Id: I56c9f891262d8984b6a9a69d96752c2dd6bb2371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-28src/ec: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: Ic2cdfa08cdae9f698eb2f8fa4c4ae061f1a7d903 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-12ec/librem/ec: Fix offset for Bluetooth enable (BTLE)Matt DeVillier
Test: boot OS (Ubuntu, Windows 10) on librem13v2, verify BT function key toggle now works correctly. Change-Id: I68dc99e72a09f7affbcd691d03dd4607a898313e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07Kconfig: Indent help textMartin Roth
These Kconfig files had help text that was not indented further than the 'help' keyword. Change-Id: Ia9fdb22c0f5f0cec0c9d08aa6603b4ce8d60d9a3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-04ec/ene_kb3940q: correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString() where needed TEST: boot Windows on google/butterfly, observe battery data reported correctly. Change-Id: I395cc7fbdf26c8cc816e47107e552c0533580fa1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02ec/google/chromeec: Fix typo in ECUI deviceDuncan Laurie
The IO region defined for EC_HOST_CMD_REGION1 was incorrectly using EC_HOST_CMD_REGION0 for the range maximum so the region was showing a minimum of 0x880 and a maximum of 0x800. Both min and max should report the same value as this region is fixed and cannot be relocated by the OS. Change-Id: I387b1c36aa115e03d0c6f9939eb13c93b14ad909 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-11mb/lenovo/x201: Add support for ThinkLightStefan Ott
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the ThinkLight from the Operating System. This patch adds partial support for that method, enough to enable or disable the ThinkLight: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light With the original BIOS the UCMS method exposes a wide range of values through a generic /proc/acpi/ibm/cmos interface. With the changes suggested in this patch that interface is also exposed but only accepts the commands to enable or disable the ThinkLight; all other commands are ignored. This change would potentially benefit all currently supported Thinkpad models, I only have an X201 available for tests though. Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/19644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-05ec/google/chromeec: provide reboot functionAaron Durbin
Provide a common function to issue reboot commands to the EC. Expose that function for external use and use it internal to the module. BUG=b:35580805 Change-Id: I1458bd7119b0df626a043ff3806c15ffb5446c9a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19573 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2017-04-08ec/roda/it8518: Do EC write manually with long timeoutNico Huber
The EC may take very long for the first command on a cold boot (~180ms witnessed). Since this needs an incredibly long timeout, we do this single command manually. Change-Id: I3302622a845ac6651bc7f563370d8f0511836f94 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18707 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-08ec/acpi: Add function to read EC status registerNico Huber
Change-Id: I7b690d1f23ecf4083952c173be1d3a1246bc1593 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18706 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
Instead of defining a separate LID device for mainboards using chromeec, define EC_ENABLE_LID_SWITCH for these boards. Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22google/chromeec: Ensure \_SB.LID0 is present before using itFurquan Shaikh
Since we want to support devices that do not have a lid but still use EC, we need to conditionally check if referencing \_SB.LID0 is valid. BUG=b:35775024 Change-Id: I92433460ec870fb07f48e67a6dfc61e3c036a129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18941 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-21ec/lenovo/h8: Support an optional battery page flip delayTobias Diedrich
The Lenovo H8 battery interface uses a paged EC memory area. Some Thinkpads (in particular the S230U) use a different EC controller (ENE KB9012) with mostly compatible firmware, which requires an explicit delay between writing the page register and reading the page data. Change-Id: Iaeb8c4829efa29139396b519de803f10dd93f03f Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18348 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-11lenovo/t400: Rewrite dock from t60Kyösti Mälkki
Old dock.c copied from x201 was incorrect. Do a rewrite of t60 dock code as pnp devices. Fixes USB and serial on the dock, if it is already connected when computer is powered on. DVI and ethernet worked without this patch. Hot-plug is yet to be fixed. Change-Id: Ib20a0eff10d0cde92dd089baf4fca28b117dc999 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-09google/chromeec: Add support for cros_ec_keyb deviceFurquan Shaikh
This is required to pass button information from EC to kernel without using 8042 keyboard driver. 1. Define EC buttons device using GOOG0007 ACPI ID. 2. Guard enabling of this device using EC_ENABLE_MKBP_DEVICE. BUG=b:35774934 BRANCH=None TEST=Verified using evtest that kernel is able to get button press/release information from EC. Change-Id: I4578f16648305350d36fb50f2a5d2285514daed4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-06ec/lenovo/h8: Use older syntax for bit shiftPaul Menzel
Currently, when using `iasl` 20140926-32 [Oct 1 2014] from Debian 8 (Jessie/stable), the build of the Lenovo X60 fails due to syntax errors. ASL 2.0 supports `<<`. For consistency, right now, coreboot still uses the old syntax. So use `ShiftLeft` instead, which also fixes the build issue with older ASL compilers. Change-Id: Id7e309c31612387da3920cf7d846b358ac2bdc71 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18520 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-28ec/lenovo/h8: Fix mute LEDsNicola Corna
thinkpad_acpi expects a SSMS method to turn on/off the mute LED and a MMTS method to turn on/off the microphone mute LED. With these methods implemented the driver can correctly sync the LEDs with the corresponding statuses. There seems to be two different bits to mute the audio in the Lenovo H8 EC: * AMUT, used internally (for example to disable the audio before entering S3). * ALMT, controllable by the OS, which also toggles the mute LED (if present). Tested on a X220T and on a X201. Change-Id: I578f95f9619a53fd35f8a8bfe5564aeb6c789212 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18329 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins)
2017-02-28ec/lenovo/h8: Pulse the power LED during S3, if supportedNicola Corna
On the models that support it (like the X220) the LED pulses, on the others (like the X201) the LED powers off. Change-Id: I2ac7dbc30609179e4ca5fc0a7b06763431fe3344 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18325 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-28ec/lenovo/h8: Add tablet mode switch methodNicola Corna
thinkpad_acpi expects a MHKG method which returns the current state of the tablet mode switch shifted left by 3. If such method is not found, subsequent laptop/tablet mode events are ignored. Tested on a X220T. Change-Id: Ic9ffea2ffe507b3692d1dd7411c52b813ec32146 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18328 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-28Select a default SeaBIOS PS2 timeout in H8 KconfigArthur Heymans
This timeout is probably needed on all devices with Lenovo H8 embedded controllers so set the default there. Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18274 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-02-24ec/lenovo/h8: Guard against EC bugs in the battery status logic.Tobias Diedrich
On my Thinkpad with an H8-compatible ENE KB9012 EC (GDHT92WW 1.52), when the battery is nearly full and we switch from battery to AC by plugging in the cable, the current rate will not drop to 0 immediately, but the discharging state is cleared immediately. This leads to the code trying to process an invalid rate value >0x8000, leading to a displayed rate of >1000W. This patch changes the logic to deal with these corner cases. Change-Id: Ideb588d00757f259792e5ae97729e371b63a096c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18349 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-20ec/lenovo: Add guards to fix build errors without SMBIOSPaul Menzel
Not selecting the Kconfig option `GENERATE_SMBIOS_TABLES` the build fails with the error below. ``` CC ramstage/ec/lenovo/h8/h8.o src/ec/lenovo/h8/h8.c:201:2: error: unknown field 'get_smbios_strings' specified in initializer .get_smbios_strings = h8_smbios_strings, ^ src/ec/lenovo/h8/h8.c:201:2: error: initialization from incompatible pointer type [-Werror] src/ec/lenovo/h8/h8.c:201:2: error: (near initialization for 'h8_dev_ops.read_resources') [-Werror] cc1: all warnings being treated as errors ``` So add the appropriate preprocessor guards to fix the build error. Change-Id: I3baed452d422539a805c628a8c4a6a8c2a809317 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17770 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-02-07ec/google/chromeec: let platform prepare for reboot when resetting ECAaron Durbin
This fixes an issue on systems where the S3 state in the pm1 control registers are not cleared when vboot determines recovery mode is required on an S3 resume. The EC code will reboot the system knowing that the EC was in RW. However, on subsequent entry into romstage the S3 path will be taken and fails to recover cbmem -- forcing another reboot. To work around that, signal to the platform a reboot is happening and let the platform perform the necessary fix ups to the register state. BUG=chrome-os-partner:62627 Change-Id: Ic144b11b4968c92a1273b8d9eb9dc10f0056bf3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18295 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-07ec/google/chromeec: Add support for tablet mode switch driverGwendal Grignou
Add a new driver GOOG0006 to report tablet switch to user space. On glados based convertible, check that with a new kernel driver (cros_ec_tbmc) that evtest collects tablet switch changes. Change-Id: I6821eaac1feb6c182bc973aaa2f747e687715afb Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/430951 Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/18173 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-15ec/ene932: correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString() where needed Change-Id: Ic86048d1d6354b9b0dac3c8957df318d0825c905 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17783 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-15ec/google/chromeec: query cbmem for retrain statusAaron Durbin
The EC switches, including the hardware retrain flag, are cleared when handing off the vboot state in romstage. However, one may still want to query the state of the hardware retrain flag. Thus, add a method to get the flag from cbmem. BUG=chrome-os-partner:60592 BRANCH=reef Change-Id: Ic76cfb3255a8d3c179d5f8b13fa13c518f79faa2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17869 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-15ec/chromeec: Correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString(). Change-Id: I4fdbf97e9b75030374dffc99a954dd9faa6a5209 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17782 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)