summaryrefslogtreecommitdiff
path: root/src/ec
AgeCommit message (Collapse)Author
2019-05-29src/{ec,vendorcode}: Add missing 'include <types.h>Elyes HAOUAS
<types.h> is supposed to provide <stdint.h> and <stddef.h>. So when <types.h> is included, <stdint.h> and/or <stddef.h> is removed. Change-Id: I1eb4163fb36a47b584f1fc9dd3c012e2930e9866 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-24ec/google/wilco: Fix radio control commandDuncan Laurie
This command is working as written, but it is not actually correct as to what the format of the command should be. Fix this and add define the other radios. There is no change in the command send to the EC. Change-Id: Ia551b08561b673d27bec2f900d97b746699b30c4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-05-22ec/google/wilco: set diagnostic LEDs on boot failureKeith Short
On Wilco devices, if any of the coreboot stages fails with a fatal error, set the diagnostic LEDs with the Wilco EC. The last saved post code is used to determine the error code sent to the EC. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). TEST=Forced a fatal error in both bootblock and verstage to confirm diagnostic LEDs during these stages. This works on cold-boots only. Bug b:132622888 tracks the mailbox failures on warm boots. Change-Id: If865ab8203f89e499130f4677fec166b40d80174 Signed-off-by: Keith Short <keithshort@chromium.org> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-13src/ec/lenovo/h8/acpi: Serialize Control MethodElyes HAOUAS
IASL reports warning 'Control Method should be made Serialized'. Change-Id: I034f2c00e912e8f9ef87b9918de1db06fade38b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-08ec/lenovo/h8: Add VBOOT board supportPatrick Rudolph
Use Fn-Key as recovery mode switch. Tested using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: I2c682431b3f09839db265259205104bd9ef4abfc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-08ec/lenovo/h8: Add function to query sense statePatrick Rudolph
* Add function to wait for sense registers to become valid. * Add function to retrieve Fn-Key state. Tested on Lenovo T500: * It takes about 700msec for the registers to become valid. Tested on Lenovo T520: * It takes less than 150msec for the registers to become valid. Change-Id: Ie27e2881a256c4efb3def11f05070c446db6e5fc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-18ec/google/wilco: Support board_id with EC provided IDDuncan Laurie
The EC can return a board ID value similar to the Chrome EC. In order to use this for the board version returned by SMBIOS this commit implements the board_id() function for mainboards that use this EC. BUG=b:123261132 TEST=Check /sys/class/dmi/id/board_version to see that it is reflecting the value that the EC provides. Change-Id: I3fbe0dc886701f37d2424fe7a2867fd860fa1ec0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32276 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18ec/google/wilco: Send "logo displayed" progress codeDuncan Laurie
This progress code enables keyboard backlight control that otherwise would only work 30 seconds after boot. This code is already defined but it was not being sent by coreboot. It is run in the "post device" step between the other defined progress codes. BUG=b:130754032 Change-Id: Ica6c622e568cb236c17bf3edb6639d0177510846 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-28ec/google/wilco: Add ACPI _BIX method for batteryDuncan Laurie
I added a method to fill out the _BIX package structure but never hooked it up to the expected _BIX method that the OS uses. This change adds _BIX method and uses the existing method to fill it out. It also adds ^ before the _UID in _BIF to match _BIX as the _UID is one level above the method. Change-Id: I0de91369b6780fd9432990732c1078a73f6a3419 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28ec/google/wilco: Add a romstage init function to send progress codeDuncan Laurie
When using FSP with debug enabled it takes too long to get to ramstage and send the first progress code to the EC. The same thing has been reported to happen when 2x16GB memory is installed. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5676354f5e53540273a9029411507f91864735a1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-21Revert "UPSTREAM: ec/google/wilco: Enable software sync for VBOOT"Duncan Laurie
This reverts commit 51169b7dda4a1978d622e329a1c40e384471c165. I was not ready to enable this option yet, until it is enabled in depthcharge it needs to stay off in coreboot or depthcharge will attempt to do software sync without a proper driver. Change-Id: I4840812d0541f822502cfc5c66bed27edf4d2ecc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32007 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21ec/google/wilco: Add function to indicate if EC uses signed FWDuncan Laurie
This will be used to distinguish the mainboard SKU so that the correct EC firmware can be bundled with the board. This is read from EC RAM so it can be used by an ACPI method in the future. BUG=b:119490232 Change-Id: I71b8017fc4b88e793dfe709e1cb1ab0f0bcdc4fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Enable software sync for VBOOTDuncan Laurie
Enable software sync by default if VBOOT is enabled. The slow update option is also needed, but this is moving to depthcharge so it is not defined here. Change-Id: I046661fae7315f84e96293532b4e1568558df962 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Fix handling of commands that do not respondDuncan Laurie
If the command does not respond the driver should not wait for it to complete before returning. Tested with SMI debug enabled to ensure that the final command does not report a failure. Change-Id: I7c1bfa19a92e8332ac1aa6ff95f94ff4cbdf789d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-15ec/google/wilco: Clear S0ix support bit at bootDuncan Laurie
To ensure the power button functions as expected in firmware ensure that the EC is not in "S0ix supported OS" mode and expecting the power button to be handled by the virtual button interface. BUG=b:128409889 TEST=Verify that the power button works at the developer screen when the system is rebooted from within Chrome OS. Also ensure that it works when external warm reset signal is asserted by H1. Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-15ec/google/wilco: coalesce tent mode to tablet modeJett Rink
Both tent mode (0x01) and tablet mode (0x02) should be considered tablet mode by ChromeOS. BRANCH=none BUG=b:122052438 TEST=ChromeOS enters tablet mode when lid angle exceeds 180 Change-Id: I89ba8141350fc628c8cff89d5f33aa47c6ae6afe Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06ec/lenovo/h8: Implement ACPI methods to set battery thresholdsAlexey Kharlamov
There are two known reverse-engineered ways to manage battery thresholds. This patch implements them and adds a way to enable them for different mainboards. Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11. Works fine with new Linux userspace API for controlling battery thresholds, available since 4.17. (/sys/class/power_supply/BAT0/charge_(start|stop)_threshold). The new API is supported by TLP (you might need to set NATACPI_ENABLE=1 in /etc/tlp.conf). tpacpi-bat works fine too. Signed-off-by: Alexey Kharlamov <der@2-47.ru> Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04Fix indirect include for endianessKyösti Mälkki
The function (preprocessor macro) we need is defined in <endian.h> not <swab.h>. Change-Id: I3a86c7050bf853e3a56a15421132240e19f40912 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-27ec/google/chromeec: fix the error status passingYH Lin
Various instances of google_chromeec_command() can return non-zero number (both positive and negative) to indicate error -- fixing cbi_get_uint32() and cbi_get_string() so they follow the same convention. BUG=b:123676982 BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I7f0a8a61d01d942cba57036a17dd527fdbbf940c Reviewed-on: https://review.coreboot.org/c/31585 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-26ec/google/chromeec: Clarify return value of google_chromeec_commandDaisuke Nojiri
This patch clarifies the definition of google_chromeec_command. Currently absence of the definition isn't causing any problem because wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an interface which returns only negative error codes. However, there is a chance that a new wrapper API will be addedl which check 'ret < 0' to catch errors, assuming other interfaces behave the same. Or existing wrapper APIs will be broken as soon as they're compiled for another interface. BUG=chromium:935038 TEST=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f Reviewed-on: https://review.coreboot.org/c/31613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-25ec/google/wilco: Fix ACPI power status eventsDuncan Laurie
This change fixes the power status events for AC and battery events from the EC. The register that was being used is not returning the expected information. BUG=b:125472740 TEST=enable ACPI debug in the kernel and verify that AC and battery insert/remove are detected properly. Change-Id: I15f71fcf0ca6aa9438e951865787c9fc273792d8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-11ec/lenovo/h8/Kconfig: increase ps2 kbd timeout from 3000 to 5000msMichael Bacarella
On my Thinkpad T420 the default 3000ms SeaBIOS timeout is too short, it takes nearly 5000ms for my keyboard to become ready. Timing out before it's ready leads to pretty bad behavior: I cannot use my keyboard at all to control SeaBIOS, nor the subsequent GRUB instance. Linux is fine though, possibly because it does its own keyboard init. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: Id1681bf3921c8b5dc124d4c4e9072f146f84f3a2 Reviewed-on: https://review.coreboot.org/c/31279 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data. On this platform, interrupts are routed via the GPIO controller so need to be registered using GpioInt instead of Interrupt. BUG=b:123750725 BRANCH=grunt TEST=MKBP events still received (with matching EC and kernel changes) Change-Id: If499d24511bbaa7054207b7e0b98445723332c4f Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/c/31278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-02-05ec/google/wilco: Add virtual button supportDuncan Laurie
Add an ACPI device that is compatible with the Intel Virtual Button kernel driver for reporting tablet mode state and various virtual button events that may come from the EC. This driver is used in Windows and in the Linux kernel at drivers/platform/x86/intel-vbtn.c Because of a check in the kernel driver it expects the board to define the SMBIOS enclosure type as convertible for the check at driver load time for tablet/laptop and dock/undock to work. The virtual tablet mode button will proxy the tablet mode state sent from the Sensor Hub to a SW_TABLET_MODE event in the kernel. The virtual power button is used during S0ix for the EC to wake the system with an SCI. There are separate press and release events which are sent for completeness, although the kernel driver will ignore the release event. BUG=b:73137291 TEST=Test that the power button can wake the system from S0ix. Also verify that the device is reported as laptop mode at boot. Change-Id: I0d5dc985a3cfb1d01ff164c4e67f17e6b1cdd619 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31208 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-04ec/google/wilco: Add ACPI device for event interfaceDuncan Laurie
Add a separate ACPI device for the Wilco EC event interface so that the OS drivers can bind to it separately. Since the event handling is all done with ACPI and not mailbox calls this will be implemented as a standard acpi_driver in the kernel. BUG=b:119046283 TEST=veriy device exists in DSDT Change-Id: I5259a926fb6d5faea835bcdefa12f0184c5adf4a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-04ec/google/wilco: Add S0ix support handlersDuncan Laurie
1) In the EC _REG method set the flag indicating S0ix support in the OS. 2) Add a function that can be called by the LPI _DSM method to indicate to the EC that the OS is entering or exiting S0ix. BUG=b:73137291 Change-Id: Iddc33a08542a6657694c47a9fda1b02dd39d89f7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31094 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30ec/google/chromeec: Add boardid.c to verstageYou-Cheng Syu
Modifiy Makefile so that we can get board ID in verstage. BRANCH=none BUG=b:117916698 TEST=manually Change-Id: Idcdb6e07f565c937185cab811abac0ce47e5e3a7 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-24ec/google/wilco: Turn on wake up from lidLijian Zhao
Send required EC command to enable ACPI S3 wake up from lid switch. BUG=b:120748824 TEST=Put Sarien system into S3 and then wake up from lid switch successful. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I13f3469847b0886147b8b624311a1ece796f847b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-24ec/kontron: Add support for Kontron kempldNico Huber
A programmable logic device used by Kontron as EC on their COM express modules. The name `kempld` is taken from Linux kernel sources, as is the I2C driver. The meaning of the acronym is unclear, probably: Kontron Embedded Module PLD. Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-12-28ec/chromeec: fix LPC read/write for MEC devicesMatt DeVillier
Commit 8cf8aa2 [ec/google/chromeec: Use common MEC interface] changed the return mechanism for the checksum on reads/writes for MEC devices, but incorrectly handled the passed-in csum parameter by not dereferencing. This led to the returned csum value always being zero, which causes all EC commands with non- NULL data_in to fail with a checksum error. Fix this by storing the returned checksum in a temp variable, and only assigning to csum when the pointer isn't NULL; Test: build/boot google/chell, verify EC hello command succeeds, keyboard backlight turned on at boot. Change-Id: I7122c3fdc5a19f87f12975ee448728cf29948436 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-06lenovo/h8,thinkpads: Re-do USB Always OnNathaniel Roach
Re-write the UAO handling code as it had stopped working (#171) (the flag was not getting read from the RTC properly in SMM) Remove the SMM code as it's not needed (but EC flag won't be set upon entering S3 now) Set the EC flags on boot the same way other flags are set Document bitwise operators for clarity Propagate changes to other Thinkpads (updated X201 to have 2 bits for the flag as it only had 1) Per Nicola Corna's previous commits, 0x0d is set for "AC only" "AC only" does exhibit different behaviour - the USB port is turned on a few seconds after entering S3, rather than < 1 sec, regardless of AC status Tested on X220 Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/c/29565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-04ec/google/wilco: Turn camera power onDuncan Laurie
Send the EC command required to turn the camera power on and verify that it shows up on the USB bus. Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Guard DTPF with ifdefDuncan Laurie
There is a dependency issue with the EC DPTF code accessing methods that are external, but once the mainboard includes the relevant code they become internal and the current version of IASL used by jenkins will fail to compile it. Until the new IASL is deployed everywhere wrap the EC DPTF code and expect that the mainboard will explicitly enable it. Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco/acpi: Add DPTF supportDuncan Laurie
Add the support needed for DPTF. This includes the methods to write trip point values, read temperatures, and handle events. This was tested on a sarien board by inspecting AML debug output with the kernel while monitoring temperatures and trip points in sysfs and controlling temperatures with a fan to ensure that when a trip point is crossed an SCI is generated and the event is handled properly. Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29761 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco/acpi: Fix issues and clean upDuncan Laurie
- Disable debug output from read/write methods by default - Use argument to _REG to disable SCI when EC is unregistered - Change read/write macros to sync level 2 so they can be called when a mutex is already held - Define some missing events Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29760 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Fix extended event handlingDuncan Laurie
Extended events will be handled by the OS kernel driver, but that driver needs a method exposed by ACPI to read the event data from the EC and into a buffer. Tested by generating a hotkey event and reading the buffer from the Linux kernel driver with acpi_evaluate_object(). Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29674 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable WiFi radioDuncan Laurie
Add EC command to enable WiFi radio and send that command at startup. Tested to ensure WiFi is functional on a sarien board. Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29673 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable COM1 ACPI deviceDuncan Laurie
Enable the COM1 ACPI device based on the existing Kconfig option CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to also define another value for ACPI. Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29672 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/model_206{5,a}x: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: Iecc54e94484f5f11e0ba8ef6d1d844276e484b4d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29886 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16ec/google/chromeec: add support for retrieving OEM nameWisley Chen
OEM name can be stored in CBI. This change can support for fetching the OEM name from CBI. BUG=b:118798180 TEST=Verified to get data from CBI Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-15google/chromeec/acpi/ec: Add support for Device DPTF Profile NumberKarthikeyan Ramasubramanian
In order to support Multi-DPTF profile, Device DPTF Profile Number is introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset 0x09. This bit field stays along with Tablet Mode Device flag. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-12ec/google/chromeec: Configure EC_SYNC_IRQ as level triggeredFurquan Shaikh
EC_SYNC_IRQ from EC to host is level-triggered in practice and configuring it as edge-triggered on the host results in host missing events if there are multiple events queued on the EC side. This is because Linux kernel driver reads one event per irq and the EC does not de-assert the interrupt line until all events are drained out. This results in event queue being filled up completely on the EC and the host failing to see any of those events. This change configures EC_SYNC_IRQ as level triggered to allow the host to read events from the the EC as long as the line is asserted. BUG=b:118949877 Change-Id: Id3fcfa0445f83865d57975a7bbc179dca047ba4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2018-11-06chromeec: Disable battery remaining capacity workaroundDaisuke Nojiri
If remaining charge is more than x% of the full capacity, the remaining charge is raised to the full capacity before it's reported to the rest of the system. Some batteries don't update full capacity timely or don't update it at all. On such systems, compensation is required to guarantee the remaining charge will be equal to the full capacity eventually. On some systems, Rohm charger generates audio noise when the battery is fully charged and AC is plugged. A workaround is to do charge- discharge cycles between 93 and 100%. On such systems, compensation was also applied to mask this cycle from users. This used to be done in ACPI, thus, all software components except EC was able to see the compensated charge. This patch is part of the effort of moving the logic to EC. With this and the EC changes, EC can see what the rest of the system sees, thus, can control LEDs synchronously (to the display percentage). Another rationale of this move is EC can perform more granular and precise compensation than ACPI since it has more knowledge about the battery and the charger. CQ-DEPEND=CL:1312204 BUG=b:109954565,b:80270446,chromium:899120 BRANCH=none TEST=Verify charge LED changes to white (full) on Sona synchronously to the display percentage. TEST=Verify charge LED changes to blinking white (low) on Sona within 30 seconds synchronously to the display percentage. Change-Id: I0b51911b90dc2e7fcf5c730c54d9fda1fea76aa9 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/29441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-02ec/google/wilco: Add wake pin configurationDuncan Laurie
Add a way for the mainboard to provide a wake pin that the EC will use to wake the system. This defines a _PRW object. Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29408 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Unmute audio on initDuncan Laurie
The speakers start up muted, and the EC must be told by the BIOS to unmute it. This helps prevent popping noises on boot/resume. Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add ACPI SuperIO devicesDuncan Laurie
Add ACPI devices for the basic SuperIO functionality provided by the EC for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART. The specific defines to enable these devices should be declared by the mainboard before including this ASL, the same as the Chrome EC behavior. Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC event handlersDuncan Laurie
Add methods to handle ACPI EC events at runtime. Currently only some common events are handled like lid switch and battery info, and the event status is printed for debug on other events. Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI battery and AC objectsDuncan Laurie
Add the expected objects (_BST, _BIF, _BIX) for reading battery information and status from the embedded controller, and the expected objects for reporting AC power status. The battery was tested by booting with a battery attached and checking that it is present in /sys/class/power_supply/BAT0 and that the values are consistent and within expected ranges. The AC device was tested by checking the AC status in sysfs when AC is inserted or removed while the system is running. Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC infrastructureDuncan Laurie
Add the base ACPI support for the Wilco embedded controller, using ASL 2.0 syntax throughout. This includes the EC device and its resources, as well as the layout for the EC RAM and the functions needed to read and write to the EC RAM. The EC RAM address space is typically read/write, and so the ACPI EC device expects that a defined Field can be read and/or written. With this EC the read and write address spaces are different. For example, a read from address zero will return data that is unrelated to what a write to address zero expects. This makes using a typical OperationRegion to describe the EC RAM address space somewhat impracticle, since field definitions would overlap. Instead, methods are provided for reading and writing to an EC RAM offset, and the EC RAM layout is defined as a Package that describes offset+mask for read or write fields within the EC RAM. Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add a bootblock function for early initDuncan Laurie
Add a function for use in bootblock stage that performs early init of the EC, in particular setting it up for UART passthrough so a legacy serial port can be used by the host. This needs to be called by the mainboard that intends to use it in bootblock in order for the UART to be available in later stages. Some of the PNP style programming may look odd, but it is following the EC specification which is not entirely standard. This code has been tested on a board with this EC and it is functional. Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Save and restore PS/2 data for S3Duncan Laurie
Send a command to the EC on the way into S3 suspend state telling it to save the PS/2 data, and on resume send it a command for restoring the PS/2 data that was previously saved. Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29120 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add SMM handlersDuncan Laurie
Add EC handlers for specific SMM actions: - on entry to sleep state tell the EC to save state and to prepare for the host to enter sleep - on ACPI enable/disable send command to the EC - add a function to print SMI reasons when eSPI SMI is received These need to be called by the mainboard handlers which will be done when a board is added that uses this EC. Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29119 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Report BIOS progress to the ECDuncan Laurie
The EC expects to receive updates about the BIOS boot progress. This is used for the EC logging to track system boot completeness. If the EC is not informed about BIOS progress it will turn the system off 30 seconds after the boot starts. Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add devicetree chip infrastructureDuncan Laurie
Add a chip_operations structure for Wilco EC and hook it into the device tree so it can be initialized at boot. Reserve the device resources specified in Kconfig, which will also create the device IO windows if they have not been created in bootblock. If the IO windows already exist (becauase they were specified in the mainboard devicetree.cb) then this will find the existing entry instead. During device init stage prepare the keyboard for use, which is required for it to be functional in firmware and OS with this EC. Also send a command to the EC telling it to pass the power button through to the host for processing. Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add power related mailbox commandsDuncan Laurie
Add EC mailbox commands that are related to the power and state of the system. These commands include: - read the power status registers from the EC - read & clear the power status registers - helper function to read the current lid state - tell the EC why the host is about to power off - tell the EC that the host is about to enter a sleep state Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29116 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox commandsDuncan Laurie
Add basic supported mailbox commands for this embedded contrlller, and define some command functions to retrieve and print information about the EC. Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox helper functionsDuncan Laurie
Add helper functions that make it more convenient to send and receive the most common types of commands to the Wilco embedded controller. Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29114 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add Wilco EC mailbox interfaceDuncan Laurie
The Google "Wilco" Embedded Controller is a new embedded controller that will be used in some future devices. The mailbox interface is simliar to the existing Chromium EC protocol version 3, but not close enough that it was convenient to re-use the full Chrome EC driver. This commit adds the basic mailbox interface for ramstage which will be used by future commits to send varous mailbox commands during the boot process. The IO base addresses for the mailbox interface are defined in Kconfig so they can be changed by the mainboard if needed. Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18ec/google/chromeec: Use common MEC interfaceDuncan Laurie
Switch to using the common MEC interface instead of the Chrome EC specific code. Tested on a Chell chromebook that has a MEC based Chrome EC to ensure that the EC interface is still functional. Change-Id: Idf26e62c2843993c2df2ab8ef157b263a71a97c9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18ec/google/common: Add a common MEC interfaceDuncan Laurie
In order to re-use the MEC interface code in the Chrome EC driver move it to a common directory within the ec/google directory. The Chrome EC driver itself is changed to use this interface in the next commit, and future commits will introduce a new EC that also uses this interface. Change-Id: I13516b5e4c4c49f53bb998366284a26703142e2a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11ec/google/chromeec: Add support for querying ec board id in smm stageFurquan Shaikh
This change adds ec_boardid.c to smm stage, which is required to allow mainboards to query the ec to get board version in this stage. BUG=b:112366846,b:112112483,b:112111610 Change-Id: Iccbba96ebb94a12745a62cbfe3496f9e6f921e3d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org>
2018-10-11ec/google/chromeec: Get rid of __SMM__ guard for chromeec functionsFurquan Shaikh
There doesn't seem to be a reason why we would want to protect certain chromeec functions with __SMM__ guard. So, this change gets rid of it. If the functions remain unused, then they would be removed during linking. Change-Id: I8196406074b01fe8ea15173c55d45bb86384be1b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29006 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04ec/google/chromeec: Define a sync IRQ if neededDuncan Laurie
Some boards are adding a second pin used for synchronization between the EC and AP. This is a direct connection between the EC and the SOC that is intended to provide a lower latency interrupt signal for sensors on the EC. Currently the runtime EC interrupts assert an SCI before eventually resulting in a Notify() on the MKBP device that the sensor driver users. These extra layers add processing time and require additional EC communication to determine the event source. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: I49a11363ce82882e572bcb8923fd114ab6593fea Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-09-17ec/google/chromeec: check to see if s0ix is enabledPaul Moy
Make sure S0Ix is supported before trying to set up the EC's lazy wake mask. Change-Id: I78896ffe6312409c9f241b3b3224169c188bb265 Signed-off-by: Paul Moy <pmoy@chromium.org> Reviewed-on: https://review.coreboot.org/28610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-14ec/lenovo/pmh7: support 9bit address spaceAlexander Couzens
The pmh7 has at least a 9bit address space. The h8s allows to access the 9th address space by using io port 0x15ed as second address register. The pmh7 is connected via SPI to the h8s. The h8s is acting as proxy to access the address space. Change-Id: I0d7ce00950862adf928a88d70afbc33df8b87d9a Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/28196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
2018-09-05mb/lenovo: Support dual graphics for xx20/xx30 ThinkPadsEvgeny Zinoviev
Add CMOS option that allows to use both integrated and discrete GPU. Tested on ThinkPad W530. Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02chromeec: PS2K node can't be under SIO nodeStefan Reinauer
Some operating systems won't find the keyboard if it is under the SIO node. BRANCH=none BUG=none TEST=Boot Windows, observe that keyboard is working Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> Original-Change-Id: I76b1ca9bf9243ffa861bed9c356a45377e7f43ef Original-Reviewed-on: https://chromium-review.googlesource.com/895364 Change-Id: If99e15bef2173c44cecaa8fdeaa69381bd0e499a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-28acpi: Hide Chrome and coreboot specific devicesDavid Wu
Some ACPI interfaces introduced by Chrome or coreboot do not need drivers outside ChromeOS, for example Chrome EC or coreboot table; or will be probed by direct ACPI calls (instead of trying to find drivers by device IDs). These interfaces should be set to hidden so non-ChromeOS systems, for example Windows, won't have problem finding driver. Interfaces changed: - coreboot (BOOT0000), only used by Chrome OS / Linux kernel. - Chrome OS EC - Chrome OS EC PD - Chrome OS TBMC - Chrome OS RAMoops BUG=b:72200466 BRANCH=eve TEST=Boot into non-ChromeOS systems (for example Windows) and checked ACPI devices on UI. Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1078211 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28eve: Specify a unique ID for PS2 devicesLucas Chen
Windows certification tests will fail if the PS2 devices are using Plug and Play ID (PNP0303). For all Chromebooks we should use GOOG000A. BRANCH=eve BUG=b:110066056 TEST=AltOS certification test verify. Change-Id: I479471fdb3102e3b492612a4e6ad07612273083a Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1098874 Reviewed-by: Matt Delco <delco@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28334 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23google/chromeec: Add support for "base attached switch" deviceDmitry Torokhov
On some detachables, the mere presence of attached base is not enough to determine whether the device is in tablet mode or not, so we introducing a new "switch" in EC, separate from "Tablet Mode" switch, to signal whether the base is attached or not. We also want the driver to be separate from cros_ec_keyb, so we create a new ACPI device, C(hrome)B(ase)A(ttached)S(witch), with HID GOOG000B, and guard it with EC_ENABLE_CBAS_DEVICE. Change-Id: Id73a12f04a1a48f7fbd9365c2a501afadf3878fa Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28260 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20ec/lenovo/pmh7: use read/write function in clear_bit/set_bitAlexander Couzens
Make the code simpler and improve readability. Change-Id: Ifa9308c32e4646c122254931b55fb83541a10a3c Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/28195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-17ec/google/chromeec: Fix ACPI FWTS errorMarc Jones
Fix the following FWTS error: FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line 3038 Line | AML source -------------------------------------------------------------------------------- 03035| Return (One) 03036| } 03037| 03038| Method (_Q09, 0, NotSerialized) // _Qxx: EC Query | ^ | Warning 3115: Not all control paths return a value (_Q09) 03039| { 03040| If (Acquire (PATM, 0x03E8)) 03041| { ================================================================================ ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths do not return a value. All control paths that return must return a value otherwise unexpected behaviour may occur. This error occurs because a branch on an conditional op-code returns a value and another does not, which is inconsistent behaviour. _Q09 is a reserved method and can't return a value. Change the logic so that no return is used and avoid this test error. BUG=b:112476331 TEST=Run FWTS. Change-Id: Ibbda1649ec2eb9cdf9966d4ec92bfd203bb78d07 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-13ec/google/chromeec: de-dup a _UIDMatt Delco
There's two instances od _UID 1 for PNP0C02. This change moves the more system-specific instance of the two to a higher number. I believe these are the 4 I'm seeing. soc/intel/skylake/acpi/systemagent.asl Device (PDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) soc/intel/skylake/acpi/lpc.asl Device (LDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 2) ec/google/chromeec/acpi/superio.asl Device (ECMM) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) ec/google/chromeec/acpi/superio.asl Device (ECUI) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 3) Change-Id: I2b0f1064726a1fa3940ccfb2a4627c79a26684e4 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09src/ec/google/chromeec: Fix typoElyes HAOUAS
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08ec/google/chromeec: add support for retrieving DRAM part numberAaron Durbin
The DRAM part number can be stored in the CBI data. Therefore, add support for fetching the DRAM part number from CBI. BUG=b:112203105 TEST=Fetched data from CBI on phaser during testing. Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-30ec/lenovo/h8/acpi: Fix ACPI error in _INIPatrick Rudolph
Store the power on defaults in the _REG method after the ERAM region is ready for use. It might not be ready when accessed from _INI. Tested on Lenovo T430. Change-Id: I70f22f8ac61dd850180fa159313bb0f8e4ab31d9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-27chromeec: Read EC uptime info on bootJonathan Brandmeyer
Additional diagnostic information about the EC and the most recent reasons why it has reset the AP are read out and logged via printk. This may aid in debugging spurious hangs and/or resets on the AP by providing traceability to the EC when it triggered the reset. Merely knowing that the EC was also recently reset may provide valuable intelligence. See also https://crrev.com/c/1139028. Change-Id: Ie6abe645d5acefb570b9f6a3c4a4b60d5bcd63cd Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://review.coreboot.org/27621 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-27chromeec: Sync ec_commands.h with CrOS upstreamJonathan Brandmeyer
Update ec_commands.h to be a verbatim copy of upstream, except retain the complete copyright notice found in coreboot's copy. Upstream refers to a file not present in coreboot. Change-Id: Ic3daa09ffd83c089b6874e0ea9aab8aa60016775 Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://review.coreboot.org/27620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-26ec/roda: pass ops to pnp_enable_devices instead of LDN-specific overrideFelix Held
Since ops was passed as override in the pnp_dev_info struct, the generic pnp_ops that was passed to pnp_enable_devices was never used. Change-Id: Ic35a232a9867936d3d84aa275ae50e3e3dd9bf97 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27396 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26ec/quanta: pass ops to pnp_enable_devices instead of LDN-specific overrideFelix Held
Since ops was passed as override in the pnp_dev_info struct, the generic pnp_ops that was passed to pnp_enable_devices was never used. Change-Id: I59eb60efeefcdbe8b2dc08e17453cf95bdfd39b1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27395 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26ec/compal: pass ops to pnp_enable_devices instead of LDN-specific overrideFelix Held
Since ops was passed as override in the pnp_dev_info struct, the generic pnp_ops that was passed to pnp_enable_devices was never used. Change-Id: I10e2c6da0043eb291a8c6266b251054dbe599653 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27393 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26ec/google: pass ops to pnp_enable_devices instead of LDN-specific overrideFelix Held
Since ops was passed as override in the pnp_dev_info struct, the generic pnp_ops that was passed to pnp_enable_devices was never used. Change-Id: Id09c6cffb9a0cbbd9189c18801121449c9504422 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27394 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-19ec/lenovo/h8/acpi: Apply state on wakePatrick Rudolph
Implement ACPI S3 resume control to restore the state before entering sleep. * Store the requested state wake state for bluetooth and WWAN. * Add new methods to init the state and apply the requested state on wake. * Call the new method on all devices. Change-Id: I13c08b8c6b1bf0f3deb25a464b26880d8469c005 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-19ec/lenovo/h8/ssdt: Add UWB ACPI interfacePatrick Rudolph
Add ACPI methods GUWB and SUWB for thinkpad_acpi. Required for power control of the UWB module. Change-Id: I8f9a56e45c0d765b0e06b8d3600bd3575dd09491 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-19ec/lenovo/h8/ssdt: Add keyboard backlight interfacePatrick Rudolph
Add methods MLCG and MLCS for thinkpad_acpi kernel module. Required for backlight or thinklight control from userspace. Change-Id: Ia65e770e772936c9c32be33c30839a2dee2a107c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-19ec/lenovo/h8/acpi: Add WWAN ACPI methodsPatrick Rudolph
Implement GWAN and SWAN for thinkpad_acpi kernel module. Both methods allow power control of the WWAN module. Change-Id: I5550c78e0d36884eca7a8d8ece19b64aaee44045 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-09src/{ec,include,lib}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09ec/lenovo/h8/acpi: Add BDC interfacePatrick Rudolph
* Add SSDT generator to add dynamic ACPI code. * Implement GBDC and SBDC for thinkpad_acpi kernel module. Required for BDC power control from userspace. Tested on Lenovo T430: The bluetooth module is detected and can be powercycled using network manager. Change-Id: Ida825196650966194a883945896a038b0790fe45 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>