| Age | Commit message (Collapse) | Author |
|---|
|
As DRIVERS_PS2_KEYBOARD isn't set, this function is not doing anything.
Change-Id: Ie8842a32fca56f330a0f044cf96112dc5cae6546
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
In EC versions older than 1.18, if the mirror flag was enabled, the
EC would mirror once the system reached S5.
When a mirror is successful, the system will automatically power
on, as it acts like it's been in G3. This led to machines turning on
when the intention was them to be off.
In 1.18 and later, they're installed when turning on. The result was
slower boot times when mirroring, but no unwanted powering on.
Because of this, coreboot no longer needs to power off when setting
the mirror flag.
Change-Id: I973c1ecd59f32d3353ca392769b44aadf5fcc9c3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
KBL_STATE was originally intended to provide more granular control
of the keyboard backlight. However, KBL_BRIGHTNESS has a valid value
of "off" which achieves the same thing.
Therefore, unconditionally set the KBL_STATE to enabled, and rely on
KBL_BRIGHTNESS.
Change-Id: Ic7ee6b96b1dcaa6633b111e92097bce87908885e
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77201
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the variable `mirror_flag_attempts` isn't accessible, or doesn't
have a value, don't attempt to mirror the EC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia39b2ce4ffcb8db3a335449c8bdb0d5c8a28a52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The EC should be mirrored (if it's out of date) unconditionally if
the board support Thunderbolt. Use DRIVERS_INTEL_USB4_RETIMER instead
of SOC_INTEL_COMMON_BLOCK_TCSS as it's more suitable.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27b238d4d404746c9a70bacf8e60d9e0b0e1ccca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76579
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the version of the EC firmware in coreboot doesn't match
the firmware that the EC is running, print the versions.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I55c09b8d5ffe8ca9135384c823d005b55cfd83d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76380
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the fallback value of the `fn_ctrl_swap` option to 0, which
is disabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9fcbb497f14ed0c97ff05c6c01a3929522786781
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When enabled, the EC will mirror the firmware contained inside the
coreboot ROM. This allows it to be updated at the same time as
coreboot.
Enable the mirror flag if the installed EC firmware does not match
the target version or if a CMOS option, "manual_mirror_flag" is
set.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I377abbb37dc4d3e535e518a73e73969b25967daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit b42ca4d0b2fafe7214396d30a1a833ac33cf85bc.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When enabled, the EC will mirror the firmware contained inside the
coreboot ROM. This allows it to be updated at the same time as
coreboot.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ief088e012b65be32648f581fc3190e1000bca241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rather than using `ite_`, use `ec_` so the same functions
can be called for different ECs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie61af233f731eb47772af1c82c6abdc515bc89cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0bac5e4c101792dd4c6a0d4a1ae4a4c7fcd837d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
