Age | Commit message (Collapse) | Author |
|
This reverts commit b42ca4d0b2fafe7214396d30a1a833ac33cf85bc.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When enabled, the EC will mirror the firmware contained inside the
coreboot ROM. This allows it to be updated at the same time as
coreboot.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ief088e012b65be32648f581fc3190e1000bca241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Lite Mk IV's can enable fast charging, with support up to 100W
via USB-C PD 3.0.
The default for this is disabled, as it can reduce battery life
span. This patch adds the option to enable fast charging, by
writing 0x01 to 0x18 in the EC space.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie01eb59d3f41b242190973fd9c58b1494320c12a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Support was created for the NPCE9m5x series, using version 1.1
of the datasheet. The specific model tested was the NPCE985P/G,
on the StarLite Mk IV with version 1.00 of the EC firmware.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib66baf1e88f5d548ce955dffa00c9b88255b2f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Guard Max Charge EC write in Kconfig so it's only used on
platforms that support it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7be39cd9543c8253d53070950edc6908a21e864a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Convert EC_GPI_SCI to Kconfig option with default value of
0x50 that is used by most boards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d47ebe76394fe1bcb217e0c6211db1566f82189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add EC support that supports different Q Events and EC memory.
Created from the ITE IT5570E and IT8987E datasheets, all using
data port 0x4e.
Tested with Ubuntu 20.04.3 and Windows 10 on:
* StarBook Mk V (TGL + IT5570E):
* ITE Firmware 1.00
* Merlin Firmware 1.00
* LabTop Mk IV (CML + IT8987E):
* ITE Firmware 1.04
* LabTop Mk III (KBL + IT8987E):
* ITE Firmware 3.12
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58343
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|