| Age | Commit message (Collapse) | Author |
|---|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There are two known reverse-engineered ways to manage battery
thresholds.
This patch implements them and adds a way to enable them for
different mainboards.
Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11.
Works fine with new Linux userspace API for controlling battery
thresholds, available since 4.17.
(/sys/class/power_supply/BAT0/charge_(start|stop)_threshold).
The new API is supported by TLP (you might need to set NATACPI_ENABLE=1
in /etc/tlp.conf).
tpacpi-bat works fine too.
Signed-off-by: Alexey Kharlamov <der@2-47.ru>
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I91158452680586ac676ea11c8589062880a31f91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31692
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On my Thinkpad T420 the default 3000ms SeaBIOS timeout is too short,
it takes nearly 5000ms for my keyboard to become ready.
Timing out before it's ready leads to pretty bad behavior: I cannot use
my keyboard at all to control SeaBIOS, nor the subsequent GRUB instance.
Linux is fine though, possibly because it does its own keyboard init.
Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com>
Change-Id: Id1681bf3921c8b5dc124d4c4e9072f146f84f3a2
Reviewed-on: https://review.coreboot.org/c/31279
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Re-write the UAO handling code as it had stopped working (#171)
(the flag was not getting read from the RTC properly in SMM)
Remove the SMM code as it's not needed (but EC flag won't be set
upon entering S3 now)
Set the EC flags on boot the same way other flags are set
Document bitwise operators for clarity
Propagate changes to other Thinkpads
(updated X201 to have 2 bits for the flag as it only had 1)
Per Nicola Corna's previous commits, 0x0d is set for "AC only"
"AC only" does exhibit different behaviour - the USB port is
turned on a few seconds after entering S3, rather than < 1 sec,
regardless of AC status
Tested on X220
Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Use acpigen_write_processor_cnot to implement notifications to the CPU.
Automatically generate \PPKG in SSDT.
Change-Id: Iecc54e94484f5f11e0ba8ef6d1d844276e484b4d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29886
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The pmh7 has at least a 9bit address space.
The h8s allows to access the 9th address space by using io port
0x15ed as second address register.
The pmh7 is connected via SPI to the h8s. The h8s is acting as
proxy to access the address space.
Change-Id: I0d7ce00950862adf928a88d70afbc33df8b87d9a
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
|
|
Add CMOS option that allows to use both integrated and discrete GPU.
Tested on ThinkPad W530.
Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Reviewed-on: https://review.coreboot.org/28393
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the code simpler and improve readability.
Change-Id: Ifa9308c32e4646c122254931b55fb83541a10a3c
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Store the power on defaults in the _REG method after the ERAM region
is ready for use. It might not be ready when accessed from _INI.
Tested on Lenovo T430.
Change-Id: I70f22f8ac61dd850180fa159313bb0f8e4ab31d9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement ACPI S3 resume control to restore the state before entering
sleep.
* Store the requested state wake state for bluetooth and WWAN.
* Add new methods to init the state and apply the requested state on wake.
* Call the new method on all devices.
Change-Id: I13c08b8c6b1bf0f3deb25a464b26880d8469c005
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add ACPI methods GUWB and SUWB for thinkpad_acpi.
Required for power control of the UWB module.
Change-Id: I8f9a56e45c0d765b0e06b8d3600bd3575dd09491
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add methods MLCG and MLCS for thinkpad_acpi kernel module.
Required for backlight or thinklight control from userspace.
Change-Id: Ia65e770e772936c9c32be33c30839a2dee2a107c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Implement GWAN and SWAN for thinkpad_acpi kernel module.
Both methods allow power control of the WWAN module.
Change-Id: I5550c78e0d36884eca7a8d8ece19b64aaee44045
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Add SSDT generator to add dynamic ACPI code.
* Implement GBDC and SBDC for thinkpad_acpi kernel module.
Required for BDC power control from userspace.
Tested on Lenovo T430:
The bluetooth module is detected and can be powercycled using network manager.
Change-Id: Ida825196650966194a883945896a038b0790fe45
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the APCI HKEY device to a new file and include it.
The follow-up commits will extend it and this way it remains readable.
Change-Id: Ie59b59e5a4148807125c71a362161026f685a97e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Change-Id: Ib47cc1ee617aae74a8cfbcb25c1d0c083196f417
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26460
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use of device_t has been abandoned in ramstage.
Change-Id: I3db9487c46b29510e59ec5c019d022f5cbaff354
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
PWRS is is the power source gnvs.
Notifying CPU is needed to change P- and C-states on these events.
Change-Id: I0818d10474523fb14f7ba7cfbf61166b89442083
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC does enable bluetooth on wifi cards and BDC at the same time.
Check the new Kconfig to support bluetooth on wifi in case no BDC
is installed and the BDC detection fails.
Change-Id: I23f14c937252a296dc543db49ec9e093e7e24604
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix a regression introduced by #21227 0709dc04
(ec/lenovo/h8/acpi/thermal: Add ACPI fan control).
The commit caused Windows to crash as EC reads aren't allowed in the fan
device or it's powerresource's methods. Implement the same approach as all
other platforms using a GNVS variable named FLVL instead of reading from EC.
In addition to EC reads writing to FIELD elements, in another ACPI scope,
seems to be broken. Introduce a new method to set the fan disengage mode.
Tested on Windows 7 and Lenovo T500.
Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Add register HPPI and GSTS.
Add method WLSW that is used by thinkpad_acpi kernel module.
Seperate method by an empty newline.
Change-Id: I5a125047fad0e08cd9256bc53c3f5a7db7e56e7d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Sometimes (observed on Thinkpad T400s during cold boot) a few (only one
observed) garbage bytes may detained in the output queue of EC after power
up, and they should be cleared otherwise later communications will be
disrupted.
Change-Id: Id1733f7350232d0b10ac0d1bc912b62e7fa4da75
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22181
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Disengage the fan 10 degree below passive threshold as the automatic EC fan
control does not disengage the FAN even when CPU starts melting ...
* Add EC registers FAND and FANA.
* Add ACPI methods _AC0 and _AL0.
* Add fan device and PowerResource for fan control.
Tested on Lenovo T430:
* The fan disengages at 80°C and keeps running at full speed until temperature
drops below 80°C.
* Fan can be disengaged using sysfs:
/sys/devics/virtual/thermal/cooling_device0/cur_state
Tested on Lenovo T500:
* The fan disengages at 80°C and keeps running at full speed until temperature
drops below 80°C.
* Fan cannot be disengaged using sysfs, but the current state can be read:
/sys/devics/virtual/thermal/cooling_device0/cur_state
Change-Id: I075ff5c69676927db1c5e731294e18796884f97e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21227
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI spec requires _TSP, _TC1, _TC2 and _PSL for passive cooling.
_TSP already has been added in a previous commit.
Copy the coefficients used on google devices to activate the feature.
Tested on Lenovo T430:
The CPU is throttled once the passive threshold has been reached.
Tested on Lenovo T500:
The CPU is throttled once the passive threshold has been reached.
Change-Id: I922923a9029de77158988ac254bab4aad9536935
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
```
dsdt.aml 1461: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
```
Change-Id: Iaf9455b16b061b32248139a85890f49de7467261
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Dump PMH7 revision and ID for diagnostic purposes.
Tested on Lenovo T430: PMH7: ID 05 Revision 12
Change-Id: I60d15a8f740aeb974a79b27507e974a730cec174
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
* Add support for detecting WWAN.
* Allows to turn off power to WWAN if no card is installed.
Add the following devicetree values:
* has_wwan_detection
Set to one to indicate that the following register are sane.
* wwan_gpio_num
SB GPIO num to read.
* wwan_gpio_lvl
SB GPIO level for card to be present (usually zero).
Don't enable WWAN power if no card is detected.
As there are no devicetree values yet, the new code doesn't have any effect.
Change-Id: Ie53275b384c85df8adf71fe79b3d54211c868756
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
* Add support for detecting BDC.
* Allows to turn off power to BDC if no card is installed.
* Should fix https://ticket.coreboot.org/issues/99 .
Add the following devicetree values:
* has_bdc_detection
Set to one to indicate that the following register are sane.
* bdc_gpio_num
SB GPIO num to read.
* bdc_gpio_lvl
SB GPIO level for card to be present (usually zero).
Don't enable BDC power if no card is detected.
As there are no devicetree values yet, the new code doesn't
have any effect.
Change-Id: I506de2eca4b820e6d82de6b2c48a5440462e1db5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Add support for board specific critical and passive
limits using GNVS table. Use default values if no
board specific limit exists.
* Add ACPI methods _TZP, _TSP and _PSV.
* Update ACPI method _CRT to use board specific if available.
Tested on Lenovo T500.
Change-Id: If438a909f4415f50cd7a764fb5fba7ec29599606
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add two additional LED IDs.
Add Kconfig menu entries to allow selecting the action
to execute on death.
Overwrite weak die_notify method to notify user on death.
Flash all LEDs and play beep code 10 depending on Kconfig
options.
Successfully tested on:
Tested on Lenovo T500.
Tested on Lenovo X200.
Tested on Lenovo T430, but only LEDs are flashing.
Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8
Signed-off-by: Patrick Rudolph <siro@das-labor.org
Reviewed-on: https://review.coreboot.org/19695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Always enable tp-smapi and thermal managment.
The devicetree already configures the correct values. This patch makes
sure that invalid user-settings are ignored.
The tp-smapi bit is required for the SMM handler.
The thermal bit should be set to allow the EC to monitor thermal state
of the platform.
Change-Id: Ia5aa50e0b1148a7cc8e51480623368ee62edb849
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for UAO AC only mode.
Needs tests on all platforms.
Change-Id: Ib52aab427ff687b00129024cde65b78060d21e32
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the
ThinkLight from the Operating System. This patch adds partial support for
that method, enough to enable or disable the ThinkLight:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
With the original BIOS the UCMS method exposes a wide range of values
through a generic /proc/acpi/ibm/cmos interface. With the changes suggested
in this patch that interface is also exposed but only accepts the commands
to enable or disable the ThinkLight; all other commands are ignored.
This change would potentially benefit all currently supported Thinkpad
models, I only have an X201 available for tests though.
Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/19644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The Lenovo H8 battery interface uses a paged EC memory area.
Some Thinkpads (in particular the S230U) use a different EC controller
(ENE KB9012) with mostly compatible firmware, which requires an explicit
delay between writing the page register and reading the page data.
Change-Id: Iaeb8c4829efa29139396b519de803f10dd93f03f
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18348
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Old dock.c copied from x201 was incorrect. Do a rewrite of t60 dock
code as pnp devices.
Fixes USB and serial on the dock, if it is already connected when
computer is powered on. DVI and ethernet worked without this patch.
Hot-plug is yet to be fixed.
Change-Id: Ib20a0eff10d0cde92dd089baf4fca28b117dc999
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18054
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Currently, when using `iasl` 20140926-32 [Oct 1 2014] from Debian 8
(Jessie/stable), the build of the Lenovo X60 fails due to syntax errors.
ASL 2.0 supports `<<`. For consistency, right now, coreboot still uses
the old syntax. So use `ShiftLeft` instead, which also fixes the build
issue with older ASL compilers.
Change-Id: Id7e309c31612387da3920cf7d846b358ac2bdc71
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/18520
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
thinkpad_acpi expects a SSMS method to turn on/off the mute LED
and a MMTS method to turn on/off the microphone mute LED. With
these methods implemented the driver can correctly sync the LEDs
with the corresponding statuses.
There seems to be two different bits to mute the audio in the
Lenovo H8 EC:
* AMUT, used internally (for example to disable the audio before
entering S3).
* ALMT, controllable by the OS, which also toggles the mute LED
(if present).
Tested on a X220T and on a X201.
Change-Id: I578f95f9619a53fd35f8a8bfe5564aeb6c789212
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18329
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
|
|
On the models that support it (like the X220) the LED pulses, on
the others (like the X201) the LED powers off.
Change-Id: I2ac7dbc30609179e4ca5fc0a7b06763431fe3344
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18325
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
thinkpad_acpi expects a MHKG method which returns the current
state of the tablet mode switch shifted left by 3. If such
method is not found, subsequent laptop/tablet mode events are
ignored.
Tested on a X220T.
Change-Id: Ic9ffea2ffe507b3692d1dd7411c52b813ec32146
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/18328
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
This timeout is probably needed on all devices with Lenovo H8 embedded
controllers so set the default there.
Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18274
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
On my Thinkpad with an H8-compatible ENE KB9012 EC (GDHT92WW 1.52), when
the battery is nearly full and we switch from battery to AC by plugging
in the cable, the current rate will not drop to 0 immediately, but the
discharging state is cleared immediately.
This leads to the code trying to process an invalid rate value >0x8000,
leading to a displayed rate of >1000W.
This patch changes the logic to deal with these corner cases.
Change-Id: Ideb588d00757f259792e5ae97729e371b63a096c
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/18349
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Not selecting the Kconfig option `GENERATE_SMBIOS_TABLES` the build
fails with the error below.
```
CC ramstage/ec/lenovo/h8/h8.o
src/ec/lenovo/h8/h8.c:201:2: error: unknown field 'get_smbios_strings' specified in initializer
.get_smbios_strings = h8_smbios_strings,
^
src/ec/lenovo/h8/h8.c:201:2: error: initialization from incompatible pointer type [-Werror]
src/ec/lenovo/h8/h8.c:201:2: error: (near initialization for 'h8_dev_ops.read_resources') [-Werror]
cc1: all warnings being treated as errors
```
So add the appropriate preprocessor guards to fix the build error.
Change-Id: I3baed452d422539a805c628a8c4a6a8c2a809317
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17770
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
USB AO is the internal name for the dedicated charging port on
ThinkPads when in S3 or lower.
AOEN (bit 0) is internal name for enabling this feature while AOCF
(bits 2 and 3) is the configuration field. According to Peter Stuge,
AOCF can be configured in this way:
00 => AC S3 S4 S4 USB on, battery S3 USB on, battery S4 S5 off
11 => AC S3 S4 S4 USB on, battery S3 S4 S5 USB off
10, 01 => equivalent to 00
This commit also adds a new configuration field in the CMOS of the
X220 and the X201 to activate this feature. It probably can be also
added to all the ThinkPads that support this functionality.
With this functionality USB devices are able to negotiate full power
from the dedicated port (usually the yellow one) even in S3.
Tested on a X201 and X220 with an Android smartphone: with this
feature enabled it shows "Charging" when connected during S3, without
it it shows "Charging slowly" (or it doesn't charge at all on the
X201).
For some reasons the "AC only" mode doesn't work, so it has been
disabled.
Change-Id: Ie1269a4357e2fbd608ad8b7b8262275914730f6e
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/17252
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This reverts commit 83df672d2ce481686c5c4e04625bc1b97d7a4a8b.
It's based on the assumption that the H8 keeps its configuration
during a suspend/resume cycle. User reports indicate that this might
not be true.
Caching the settings in a cbtable entry might be a better approach.
Change-Id: Ic4ba862ee7068ffe214c2aeaadecb4390a0e0529
Reviewed-on: https://review.coreboot.org/17411
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Change-Id: Ib147d90c31421c46faf99517fd07d290fd6b90a9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/17036
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some user might change some devices. After a suspend this reset
to the (nvram) defaults which breaks the user expectation.
Change-Id: Ifacca35210474ec3db41a53d2ad18f3798b14077
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16215
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I53c7cffd0f32f9babc5fb70d5a2440a7d3377602
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/17035
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib60061fa60e81e36234355aeecd6fefad8f5fed1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/17037
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I93b71ca577c973046d1651d92665168b329eda1b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16503
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Omar Pakker
|
|
On s3 wakeup h8_enable is called which resets the (audio) volume. But the
volume should be the same as before the s3 state. In particular, userland
programs (e.g. pulseaudio) may be out of sync, if the volume can be changed
by hardware buttons also emitting acpi events. Hence, do not reset the
volume on s3 wakeup.
Tested on a Lenovo ThinkPad X220.
Change-Id: I2af08dea1a3f14a40734d67d372e845cc18c5e09
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-on: https://review.coreboot.org/14183
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Idf74e400efa3fea8eb74f372e4f261ab6567db8a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13513
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
thermal.asl was written as part of the coreboot project, so gets
the standard coreboot license header.
ec_commands.h came from the chrome ec tree, so gets the BSD license
from that tree as mentioned in the header that has been replaced.
Change-Id: I514138fd4ed236105998b25d1d2d8eb8441cf91d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12918
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If any path in a method returns a value, IASL expects that all paths
within that method will return a value.
Presumably the MKHP method wouldn't get called unless there were a
pending event, but if no event is found, return a zero.
Fixes IASL warning:
dsdt.aml 1785: Method (MHKP, 0, NotSerialized)
Warning 3115 - ^ Not all control paths return a value (MHKP)
This was the only IASL warning in most lenovo mainboards.
Change-Id: Id93dcc4a74bd4c18b78f1dde821e7ba0f3444da3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12517
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fix a bug when a sound was generated while going into suspend.
E.g. When a low battery sound is played while going into suspend
a sample is stuck in this register. The user will hear a sample forever.
Change-Id: I103a5f462c8044ef5875a9adf812234b5e6960ac
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/10297
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
PS/2 emulation is part of H8, so should be inited in relevant files.
Change-Id: Ie873ea7f6f88f68f622351799462d0b000d17585
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10348
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
h8.h uses u8 without including stdint.h.
Change-Id: I7e46f6b8ca92ed23af93597fe2f08add464eb176
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10330
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Without this some radios may remain operational. They may consume power but
the immediate demonstrable effect is wireless LED still being on.
Coreboot will reenable radios on resume or poweron.
Change-Id: I9fcb08880964b1594f779a246840bc3013a44afe
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10190
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
This change switches all ECs and the generic EC ACPI code
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in ec/Makefile.inc or in
ec/<vendor>/Makefile.inc.
This means, vendor and ec directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: I29d757d1f8c10a1d0167a76fd0d0f97bac576f6d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9798
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Id88bb4367d6045f6fbf185f0562ac72c04ee5f84
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/7146
Tested-by: build bot (Jenkins)
|
|
Fixes "Discharge rate invalid message" and fwts error.
Change-Id: I51f9d819f164552567d75f83c95ba7523e97343e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6793
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
OEM strings should not be handled by mobo code but by common code with strings
collected from all devices.
Change-Id: Ibde61a1ca79845670bc0df87dc6c67fa868d48a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6788
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9998b0b4a1413ab65f1dbdf59b2f84d331ce9c3d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9fd7f894d0e611f61e8702e4eacb12d7b81154d8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6789
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
_QXX numbers are determined experimentally, hotkey scancodes from thinkpad-acpi
module.
Change-Id: I1f7548ef62529ae25dcdcbed0fc74390b7529a2e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6765
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I655536f64faaa7e1600d4fec62ba80730e2cc45a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6674
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
It's the third minipcie slot in x200.
Change-Id: Ibfa8d787698cd23b4abcffe5cff2d62039cf0f86
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6641
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It's not really used.
Change-Id: I760d5a4cbe46d17ef37ea34e29eecdb0721cb945
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6588
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This makes S3 work.
Change-Id: Ife14372f5f9bb151d7e6e98c6069eb99d5369baf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6392
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Comment #endif /* FOO */ pairings.
Alphabetise headers and remove any #if CONFIG_ guards around them.
Background rational:
Remove guarding the inclusion of headers based on CONFIG_ options. This
*potentially* could hide issues such as functions being swapped from
under our feet, since different runtime behaviour could be declared with
the same function same name and type-signature. Hence, depending on the
header we happen to get may change runtime behaviour.
Change-Id: Ic61bdfb64d99f0e2998c6451ae6686915b7bb3d4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6059
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I45fe44a91f9f83a510b204e01dbaff9e8a9696ca
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5099
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I773793bf53d91ae787bd0d0ae7bd882243196d56
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4678
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
To be consistent with touchpad counterpart.
Change-Id: I72d09b41b964f80a81fbf409ef69dd368834a3e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I6652e0ad4e0179950f775bbd0200484907bfc976
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
To stay in line with wwan and bluetooth.
Change-Id: Iafe2dc97fc2aec5c2ad1834659b796a6b079c1bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I2f422e83f2afcf0cc3f3ecbace01a8f4f39e87d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4663
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
They're pretty annoying.
Change-Id: I44d26dc168927a9cedfd6ecc4c9a51a3a7b362c7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Useful for accessibility.
Sticky modifier (sticky Fn) is a behaviour of modifier key when
you don't have to hold it pressed to achieve the result. E.g.
with normal Fn brightness up is:
<Press Fn> <Press Home> <Despress Home> <Depress Fn>
With sticky Fn you can do:
<Press Fn> <Depress Fn> <Press Home> <Despress Home>
Change-Id: I4da5adcea02428d936023891de08684cae77c44e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Tested on my X201 and X230.
Change-Id: I3c7ec65681157d15c6e87eea64779a08e03ae5a8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
wwan_enable was never used.
wlan_enable isn't something for device tree but for CMOS config if at all.
Change-Id: I765d9d6f0b73b7dc5a57c0c630a53b4b7a0b48cb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4651
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
THis reduces risks of bufer overflows.
Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Just like bluetooth and wlan it need to be enabled in EC.
Set the appropriate bit in EC if CMOS config says so.
Change-Id: Ia48ca3201f013d3b4c4153f32ff536e06b6a2f6d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4516
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Currently H8 skips important init if unable to access CMOS config.
Change default to enable all features to have a sane system without
using CMOS config.
Change-Id: I4448ccd21beae8ad23eb22391770c6fe3b83e3b4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4515
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Instead of depending on exact mobo configure general characteristic whether
dock is configured in romstage or ramstage.
X60 and T60 have superio in dock so it needs to be inited to get serial, so
it should be inited in romstage.
On X201 there is nothing useful that early in boot but it's needed to init more
to get dock working, in particular EC init needs to be done first.
Change-Id: If5072e3dec883a94cd2d5643a92f7f6c3c9feee9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4294
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead define brightness up/down function and gfx device and use
preprocessor magic to glue it together.
Change-Id: I03074ae07b33c1546d229efc3e80606ddbee6300
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4282
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
|
|
Do not directly check the return value of get_option, but instead compare
the returned value against a CB_CMOS_ error code, or against CB_SUCCESS.
Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4266
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The function reads the Build ID and the supported function specification
version from the running EC firmware, and stores a text representation
in the provided output buffer.
Change-Id: I3b647d7f315c9b4922fa9a9c5167a80f6d82e753
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/3617
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Iefc481f09268dd15bbc3cbfa8bdd110d44383f6a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4281
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Needed to make dock work on X201.
Change-Id: Id0b32266cacf04bb48530bedf50818c268f947ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4081
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Implement proprietary lenovo ACPI hotkeys
Change-Id: I36a6d3a280b0ac76d9ea063cdc10197a57e306f9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4055
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
X201 has GPE at 0x11 (17) instead of 28.
Tested on X201.
Change-Id: Ib6306e6f085c4f6811df0789aa402a0d6901ed13
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4053
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Unlike on X60/T60 dock has to be inited at the same time as EC.
Change-Id: If6eb3140c871859ce99027a50908f72bcc560243
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4082
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reverts commit 7d1ebbff5ad224591a2d1972737611f96a13145c
Change-Id: I4a9d0cd31a3df3d1e092193953f334697ca65167
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/3616
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Until ME boots (which takes seconds on X201) the reported temperature
is 128 °C which triggers Linux overheat alarm which shuts down.
Pretend temperature is 40°C until ME boots.
Change-Id: Ia49fa03c6eb27f539a23711f2c8ebfde72b1dc18
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/3404
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
