summaryrefslogtreecommitdiff
path: root/src/ec/lenovo/h8/Kconfig
AgeCommit message (Collapse)Author
2020-05-26ec/lenovo/h8: Config the ec hardware ids for newer thinkpadsDa Lao
Currently coreboot is using the ec hardware id IBM0068 for all thinkpads, but for newer thinkpads the id maybe LEN0068 or LEN0268. On Windows, the Lenovo Vantage app can't get battery details when using IBM0068. This patch config this id by motherboard. The hardware IDs for the following models can be found by searching for disassembled dsdt.asl on vendor BIOS: (But this info is not easy to find online. So I only changed some of the thinkpads.) T420: https://github.com/tluck/Lenovo-T420-Clover/blob/master/EFI/CLOVER/ACPI/1600x900-EDID/DSDT.edid-2e2-hs.dsl LEN0068 T430: https://github.com/ThiagoSchetini/macosx-thinkpad-t430/blob/master/vanilla%20ACPI%20dsl's/DSDT.dsl LEN0068 T520: Confirmed by Patrick Rudolph LEN0068 W520: Confirmed by Patrick Rudolph LEN0068 T530: Confirmed by Prasun Gera LEN0068 W530: https://bugzilla.kernel.org/show_bug.cgi?id=66731 LEN0068 X230/X230T: https://github.com/tuandzung/ThinkPad-X230-macOS-10.12.x/blob/master/DSDT/DSDT.dsl LEN0068 T440p: https://github.com/doudou/t440p/blob/master/acpi/2.30/dsdt.dsl LEN0068 Signed-off-by: Da Lao <dalao@tutanota.com> Change-Id: I797080ec8ba7ce39d47fe587319f8f32d6938875 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-11-12ec/lenovo/h8: Make dock init in ramstage fully mainboard-specificBill XIE
Discussed in CB:36093, in the past many lenovo boards need to declare an empty h8_mainboard_init_dock() to satisfy h8.c. Now the confusing H8_DOCK_EARLY_INIT might be retired, and if a mainboard needs dock init (done with h8_mainboard_init_dock() in the past) in ramstage, (discussed in CB:4294 where H8_DOCK_EARLY_INIT is introduced) it can just do it in its own chip_ops.enable_dev function. Tested on X200. Testing on other affected targets may be necessary. Change-Id: I5737406d1f6cb6e91b2e2fa349a206a3dba988d1 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-21ec/lenovo/h8: Add option to set F1-F12 as primary functionIru Cai
Tested on Lenovo ThinkPad T440p. Change-Id: I83dc2c19341475abeeacd374a1b6cf152ec9b497 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-08ec/lenovo/h8: Add VBOOT board supportPatrick Rudolph
Use Fn-Key as recovery mode switch. Tested using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: I2c682431b3f09839db265259205104bd9ef4abfc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-03-06ec/lenovo/h8: Implement ACPI methods to set battery thresholdsAlexey Kharlamov
There are two known reverse-engineered ways to manage battery thresholds. This patch implements them and adds a way to enable them for different mainboards. Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11. Works fine with new Linux userspace API for controlling battery thresholds, available since 4.17. (/sys/class/power_supply/BAT0/charge_(start|stop)_threshold). The new API is supported by TLP (you might need to set NATACPI_ENABLE=1 in /etc/tlp.conf). tpacpi-bat works fine too. Signed-off-by: Alexey Kharlamov <der@2-47.ru> Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-02-11ec/lenovo/h8/Kconfig: increase ps2 kbd timeout from 3000 to 5000msMichael Bacarella
On my Thinkpad T420 the default 3000ms SeaBIOS timeout is too short, it takes nearly 5000ms for my keyboard to become ready. Timing out before it's ready leads to pretty bad behavior: I cannot use my keyboard at all to control SeaBIOS, nor the subsequent GRUB instance. Linux is fine though, possibly because it does its own keyboard init. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: Id1681bf3921c8b5dc124d4c4e9072f146f84f3a2 Reviewed-on: https://review.coreboot.org/c/31279 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-12ec/lenovo/h8: Add support for bluetooth on wifiPatrick Rudolph
The EC does enable bluetooth on wifi cards and BDC at the same time. Check the new Kconfig to support bluetooth on wifi in case no BDC is installed and the BDC detection fails. Change-Id: I23f14c937252a296dc543db49ec9e093e7e24604 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-21ec/lenovo/h8: Add panic methodPatrick Rudolph
Add two additional LED IDs. Add Kconfig menu entries to allow selecting the action to execute on death. Overwrite weak die_notify method to notify user on death. Flash all LEDs and play beep code 10 depending on Kconfig options. Successfully tested on: Tested on Lenovo T500. Tested on Lenovo X200. Tested on Lenovo T430, but only LEDs are flashing. Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8 Signed-off-by: Patrick Rudolph <siro@das-labor.org Reviewed-on: https://review.coreboot.org/19695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-28Select a default SeaBIOS PS2 timeout in H8 KconfigArthur Heymans
This timeout is probably needed on all devices with Lenovo H8 embedded controllers so set the default there. Change-Id: I830ab1894f7c0f10f55c82e398becf44d810852d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18274 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2013-12-02Introduce a config whether dock is inited in romstage or notVladimir Serbinenko
Instead of depending on exact mobo configure general characteristic whether dock is configured in romstage or ramstage. X60 and T60 have superio in dock so it needs to be inited to get serial, so it should be inited in romstage. On X201 there is nothing useful that early in boot but it's needed to init more to get dock working, in particular EC init needs to be done first. Change-Id: If5072e3dec883a94cd2d5643a92f7f6c3c9feee9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4294 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-04-11EC: Add Lenovo H8Sven Schnelle
Move the EC support code from the X60 mainboard to a generic driver, as this EC is used in many thinkpads. Also move the ACPI code to this directory for this reason. This patch also adds a chip config, so that the initial setting for basic register can be specified in devicetree.cb Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1