summaryrefslogtreecommitdiff
path: root/src/ec/kontron
AgeCommit message (Collapse)Author
2022-02-16Use the fallthrough statement in switch loopsArthur Heymans
Clang does not seem to work with 'fall through' in comments. Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-10src/ec: Remove unused <delay.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<" Change-Id: Id3b79789c66e68aa06c63467f4733adecfee24ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-01ec/kontron/it8516e/acpi: Replace Divide(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Divide (a, b)` with `a / b`. Change-Id: Ic705dce7303b6bcd1c679a1ae7c81e0809fefa5b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60570 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-01ec/kontron/it8516e/acpi: Replace Multiply(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Multiply (a, b)` with `a * b`. Change-Id: Iabddeb97c045ee211011ffe5cd947321a5fafaab Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60568 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-31ec/kontron/it8516e/acpi: Replace Add(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Add (a, b)` with `a + b`. Change-Id: Ie1c21437a0d97ff1039775adcb915547fac71bf5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-07-16ec/kontron/kempld: Add minimal GPIO driverMaxim Polyakov
The patch adds an interface for configuring GPIOs inside the Kontron CPLD/EC. This allows to statically define the mode for each GPIO pin in devicetree.cb of the motherboard or carrier board. For example: chip ec/kontron/kempld device gpio 0 on register "gpio[0]" = "KEMPLD_GPIO_INPUT" register "gpio[4]" = "KEMPLD_GPIO_OUTPUT_LOW" register "gpio[5]" = "KEMPLD_GPIO_OUTPUT_HIGH" register "gpio[11]" = "KEMPLD_GPIO_DEFAULT" end end In this case, <device gpio 0>, like all other devices, is not a real device inside the EC. These definitions are used to understand the EC resources and systematize configuration options, but if mark this as <off>, the initialization step will be skipped in the driver code. Use KEMPLD_GPIO_DEFAULT or skip it in devicetree.cb to not configure the GPIO and keep the default mode after CPLD reset. This work is based on code from the drivers/gpio/gpio-kempld.c linux driver. Tested on Kontron mAL-10 COMe module [1]. [1] CB:54380 , Change-Id: I7d354aa32ac8c64f54b2bcbdb4f1b8915f55264e Change-Id: Id767aa451fbf2ca1c0dccfc9aa2c024c6f37c1bb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47595 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-28ec/kontron/kempld: Guard macro parametersAngel Pons
Add parentheses around macro parameters to avoid operation order issues. Change-Id: I2d4552abaeda5702619cc53e9dfae1f17b048e67 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-06src: Retype option API to use unsigned integersAngel Pons
The CMOS option system does not support negative integers. Thus, retype and rename the option API functions to reflect this. Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-04-21ec/kontron: Use get_int_option()Angel Pons
Change-Id: Ibca7660ed03525903a1146a1fb2937550406bee8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-10-11ec/kontron/kempld: Reflow long linesMaxim Polyakov
Change-Id: Ia5ad0715b742427dffa6c0c507269d904fe19bcb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-11ec/kontron/kempld: add option to configure I2C frequencyMaxim Polyakov
Allows to change the I2C bus frequency by overriding i2c_frequency option from the board devicetree. Thus, the I2C controller can use Fast-mode (Fm), with a bit rate up to 400 kbit/s and Fast-mode Plus (Fm+), with a bit rate up to 1 Mbit/s [1]. Tested on Kontron mAL10 COMe module with T10-TNI carrierboard [2]. [1] I2C-bus specification and user manual, doc #UM10204, Rev. 6, 4 April 2014. [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: If0eb477af10d00eb4f17f9c01209f170b746ad3d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44476 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08{drivers,ec/kontron}: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: Ide6cfd6f79bd54f50d9fde37c55f2b0df702478a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06treewide: move copyrights and authors to AUTHORSPatrick Georgi
Also split "this is part of" line from copyright notices. Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-05src/ec: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I422d072a9ab3350e364004ba34911cd183fc6612 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-17src (minus soc and mainboard): Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09drivers/pc80/rtc: Separate {get|set}_option() prototypesKyösti Mälkki
Long-term plan is to support loading runtime configuration from SPI flash as an alternative, so move these prototypes outside pc80/. Change-Id: Iad7b03dc985550da903d56b3deb5bd736013f8f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38192 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30ec/kontron/kempld: Add fall-through comments where appropriateNico Huber
Fixes related GCC warnings. Change-Id: I803fc0e005390ebd8a5e3ac6886ee968c56c3a34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-02ec/kontron/kempld: Select DRIVERS_UART_8250IONico Huber
Change-Id: I1d0a46b6e4fc3aea403e2adce987de30703358c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31366 Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-22src/ec: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Change-Id: Ifdb2dee08da45d698174583ee5ed44bf5a0243ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-21ec/kontron/kempld/kempld_i2c.c: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I0843bebe48e4b91fc76c440ae33bbca838621de9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-24ec/kontron: Add support for Kontron kempldNico Huber
A programmable logic device used by Kontron as EC on their COM express modules. The name `kempld` is taken from Linux kernel sources, as is the I2C driver. The meaning of the acronym is unclear, probably: Kontron Embedded Module PLD. Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-12-07sio/acpi: Add more magic bytes to ENTER/EXIT_CONFIG_MODENico Huber
ITE super-i/o chips need a fourth byte and have a special register to exit config mode. Change-Id: Ic40873649d567b87d3a937f2bf068649e67715de Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-29kbuild: automatically include ECsStefan Reinauer
This change switches all ECs and the generic EC ACPI code to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in ec/Makefile.inc or in ec/<vendor>/Makefile.inc. This means, vendor and ec directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I29d757d1f8c10a1d0167a76fd0d0f97bac576f6d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9798 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-27{arch,cpu,drivers,ec}: Don't hide pointers behind typedefsEdward O'Callaghan
Change-Id: Id88bb4367d6045f6fbf185f0562ac72c04ee5f84 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/7146 Tested-by: build bot (Jenkins)
2014-07-23src/.../Kconfig: various small fixes to textsDaniele Forsi
Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2013-07-29ec/kontron/it8516e: Add sanity checks for values from nvramNico Huber
Change-Id: Ie52d80fc8657064efdcec51c31dc9309fcc28121 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3787 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Comment low-level EC functionsNico Huber
Change-Id: I5f75998356554e08f8c9920e7612494e4710ab15 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3786 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Remove some unsafe bit shiftingNico Huber
The EC expects the temperature in 64ths degree C. Alter it8516e_set_fan_temperature() to just export this interface and make the calculation more obvious. Change-Id: Ibe241b7909f4c02b30b1e1200a1850d47695a765 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3785 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-29ec/kontron/it8516e: Add PWM limits optionNico Huber
Add an option to set minimal and maximal PWM percentages when the fan is in temperature controlled mode. Also fix a non-ascii flaw. Change-Id: I85ae244bee2145bf17d6c29e93dd4871540985c8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3774 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Correct fan setting for PWM modeNico Huber
The EC firmware expects a 255th while we provide a percentage. Change-Id: Ib06a061b431ac728329043179800729e39e6166b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3773 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Add option for external temperature sensorNico Huber
The IT8516E firmware of Kontron supports some selected external sensors attached to the EC via SMBUS or GPIO16. Change-Id: I4c451c360a393e916430e3bea04a95847455cef7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3772 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17pnp: Unify some alignment to ease autogenerating patchesNico Huber
Most PnP drivers align the initialization of their `device_operations` with spaces. Unify this, so next autogenerated patches always match the alignment. Change-Id: I3f6baef6c8bb294c136354754125ea88c07a61a1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3479 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-06ec/kontron/it8516e: Add it8516e EC driverNico Huber
This driver communicates with the IT8516e on the Kontron KTQM77. Since we don't know if the firmware and protocol are standard for the chip or customized to the board, call it kontron/it8516e. Change-Id: I7382172c6d865d60106c929124444821a07a5184 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 21:40:17 +0000