summaryrefslogtreecommitdiff
path: root/src/ec/google
AgeCommit message (Collapse)Author
2018-11-15google/chromeec/acpi/ec: Add support for Device DPTF Profile NumberKarthikeyan Ramasubramanian
In order to support Multi-DPTF profile, Device DPTF Profile Number is introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset 0x09. This bit field stays along with Tablet Mode Device flag. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-12ec/google/chromeec: Configure EC_SYNC_IRQ as level triggeredFurquan Shaikh
EC_SYNC_IRQ from EC to host is level-triggered in practice and configuring it as edge-triggered on the host results in host missing events if there are multiple events queued on the EC side. This is because Linux kernel driver reads one event per irq and the EC does not de-assert the interrupt line until all events are drained out. This results in event queue being filled up completely on the EC and the host failing to see any of those events. This change configures EC_SYNC_IRQ as level triggered to allow the host to read events from the the EC as long as the line is asserted. BUG=b:118949877 Change-Id: Id3fcfa0445f83865d57975a7bbc179dca047ba4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2018-11-06chromeec: Disable battery remaining capacity workaroundDaisuke Nojiri
If remaining charge is more than x% of the full capacity, the remaining charge is raised to the full capacity before it's reported to the rest of the system. Some batteries don't update full capacity timely or don't update it at all. On such systems, compensation is required to guarantee the remaining charge will be equal to the full capacity eventually. On some systems, Rohm charger generates audio noise when the battery is fully charged and AC is plugged. A workaround is to do charge- discharge cycles between 93 and 100%. On such systems, compensation was also applied to mask this cycle from users. This used to be done in ACPI, thus, all software components except EC was able to see the compensated charge. This patch is part of the effort of moving the logic to EC. With this and the EC changes, EC can see what the rest of the system sees, thus, can control LEDs synchronously (to the display percentage). Another rationale of this move is EC can perform more granular and precise compensation than ACPI since it has more knowledge about the battery and the charger. CQ-DEPEND=CL:1312204 BUG=b:109954565,b:80270446,chromium:899120 BRANCH=none TEST=Verify charge LED changes to white (full) on Sona synchronously to the display percentage. TEST=Verify charge LED changes to blinking white (low) on Sona within 30 seconds synchronously to the display percentage. Change-Id: I0b51911b90dc2e7fcf5c730c54d9fda1fea76aa9 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/29441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-02ec/google/wilco: Add wake pin configurationDuncan Laurie
Add a way for the mainboard to provide a wake pin that the EC will use to wake the system. This defines a _PRW object. Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29408 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Unmute audio on initDuncan Laurie
The speakers start up muted, and the EC must be told by the BIOS to unmute it. This helps prevent popping noises on boot/resume. Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add ACPI SuperIO devicesDuncan Laurie
Add ACPI devices for the basic SuperIO functionality provided by the EC for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART. The specific defines to enable these devices should be declared by the mainboard before including this ASL, the same as the Chrome EC behavior. Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC event handlersDuncan Laurie
Add methods to handle ACPI EC events at runtime. Currently only some common events are handled like lid switch and battery info, and the event status is printed for debug on other events. Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI battery and AC objectsDuncan Laurie
Add the expected objects (_BST, _BIF, _BIX) for reading battery information and status from the embedded controller, and the expected objects for reporting AC power status. The battery was tested by booting with a battery attached and checking that it is present in /sys/class/power_supply/BAT0 and that the values are consistent and within expected ranges. The AC device was tested by checking the AC status in sysfs when AC is inserted or removed while the system is running. Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC infrastructureDuncan Laurie
Add the base ACPI support for the Wilco embedded controller, using ASL 2.0 syntax throughout. This includes the EC device and its resources, as well as the layout for the EC RAM and the functions needed to read and write to the EC RAM. The EC RAM address space is typically read/write, and so the ACPI EC device expects that a defined Field can be read and/or written. With this EC the read and write address spaces are different. For example, a read from address zero will return data that is unrelated to what a write to address zero expects. This makes using a typical OperationRegion to describe the EC RAM address space somewhat impracticle, since field definitions would overlap. Instead, methods are provided for reading and writing to an EC RAM offset, and the EC RAM layout is defined as a Package that describes offset+mask for read or write fields within the EC RAM. Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add a bootblock function for early initDuncan Laurie
Add a function for use in bootblock stage that performs early init of the EC, in particular setting it up for UART passthrough so a legacy serial port can be used by the host. This needs to be called by the mainboard that intends to use it in bootblock in order for the UART to be available in later stages. Some of the PNP style programming may look odd, but it is following the EC specification which is not entirely standard. This code has been tested on a board with this EC and it is functional. Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Save and restore PS/2 data for S3Duncan Laurie
Send a command to the EC on the way into S3 suspend state telling it to save the PS/2 data, and on resume send it a command for restoring the PS/2 data that was previously saved. Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29120 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add SMM handlersDuncan Laurie
Add EC handlers for specific SMM actions: - on entry to sleep state tell the EC to save state and to prepare for the host to enter sleep - on ACPI enable/disable send command to the EC - add a function to print SMI reasons when eSPI SMI is received These need to be called by the mainboard handlers which will be done when a board is added that uses this EC. Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29119 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Report BIOS progress to the ECDuncan Laurie
The EC expects to receive updates about the BIOS boot progress. This is used for the EC logging to track system boot completeness. If the EC is not informed about BIOS progress it will turn the system off 30 seconds after the boot starts. Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add devicetree chip infrastructureDuncan Laurie
Add a chip_operations structure for Wilco EC and hook it into the device tree so it can be initialized at boot. Reserve the device resources specified in Kconfig, which will also create the device IO windows if they have not been created in bootblock. If the IO windows already exist (becauase they were specified in the mainboard devicetree.cb) then this will find the existing entry instead. During device init stage prepare the keyboard for use, which is required for it to be functional in firmware and OS with this EC. Also send a command to the EC telling it to pass the power button through to the host for processing. Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add power related mailbox commandsDuncan Laurie
Add EC mailbox commands that are related to the power and state of the system. These commands include: - read the power status registers from the EC - read & clear the power status registers - helper function to read the current lid state - tell the EC why the host is about to power off - tell the EC that the host is about to enter a sleep state Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29116 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox commandsDuncan Laurie
Add basic supported mailbox commands for this embedded contrlller, and define some command functions to retrieve and print information about the EC. Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox helper functionsDuncan Laurie
Add helper functions that make it more convenient to send and receive the most common types of commands to the Wilco embedded controller. Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29114 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add Wilco EC mailbox interfaceDuncan Laurie
The Google "Wilco" Embedded Controller is a new embedded controller that will be used in some future devices. The mailbox interface is simliar to the existing Chromium EC protocol version 3, but not close enough that it was convenient to re-use the full Chrome EC driver. This commit adds the basic mailbox interface for ramstage which will be used by future commits to send varous mailbox commands during the boot process. The IO base addresses for the mailbox interface are defined in Kconfig so they can be changed by the mainboard if needed. Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18ec/google/chromeec: Use common MEC interfaceDuncan Laurie
Switch to using the common MEC interface instead of the Chrome EC specific code. Tested on a Chell chromebook that has a MEC based Chrome EC to ensure that the EC interface is still functional. Change-Id: Idf26e62c2843993c2df2ab8ef157b263a71a97c9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-18ec/google/common: Add a common MEC interfaceDuncan Laurie
In order to re-use the MEC interface code in the Chrome EC driver move it to a common directory within the ec/google directory. The Chrome EC driver itself is changed to use this interface in the next commit, and future commits will introduce a new EC that also uses this interface. Change-Id: I13516b5e4c4c49f53bb998366284a26703142e2a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11ec/google/chromeec: Add support for querying ec board id in smm stageFurquan Shaikh
This change adds ec_boardid.c to smm stage, which is required to allow mainboards to query the ec to get board version in this stage. BUG=b:112366846,b:112112483,b:112111610 Change-Id: Iccbba96ebb94a12745a62cbfe3496f9e6f921e3d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org>
2018-10-11ec/google/chromeec: Get rid of __SMM__ guard for chromeec functionsFurquan Shaikh
There doesn't seem to be a reason why we would want to protect certain chromeec functions with __SMM__ guard. So, this change gets rid of it. If the functions remain unused, then they would be removed during linking. Change-Id: I8196406074b01fe8ea15173c55d45bb86384be1b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29006 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-04ec/google/chromeec: Define a sync IRQ if neededDuncan Laurie
Some boards are adding a second pin used for synchronization between the EC and AP. This is a direct connection between the EC and the SOC that is intended to provide a lower latency interrupt signal for sensors on the EC. Currently the runtime EC interrupts assert an SCI before eventually resulting in a Notify() on the MKBP device that the sensor driver users. These extra layers add processing time and require additional EC communication to determine the event source. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: I49a11363ce82882e572bcb8923fd114ab6593fea Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-09-17ec/google/chromeec: check to see if s0ix is enabledPaul Moy
Make sure S0Ix is supported before trying to set up the EC's lazy wake mask. Change-Id: I78896ffe6312409c9f241b3b3224169c188bb265 Signed-off-by: Paul Moy <pmoy@chromium.org> Reviewed-on: https://review.coreboot.org/28610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-02chromeec: PS2K node can't be under SIO nodeStefan Reinauer
Some operating systems won't find the keyboard if it is under the SIO node. BRANCH=none BUG=none TEST=Boot Windows, observe that keyboard is working Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> Original-Change-Id: I76b1ca9bf9243ffa861bed9c356a45377e7f43ef Original-Reviewed-on: https://chromium-review.googlesource.com/895364 Change-Id: If99e15bef2173c44cecaa8fdeaa69381bd0e499a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-28acpi: Hide Chrome and coreboot specific devicesDavid Wu
Some ACPI interfaces introduced by Chrome or coreboot do not need drivers outside ChromeOS, for example Chrome EC or coreboot table; or will be probed by direct ACPI calls (instead of trying to find drivers by device IDs). These interfaces should be set to hidden so non-ChromeOS systems, for example Windows, won't have problem finding driver. Interfaces changed: - coreboot (BOOT0000), only used by Chrome OS / Linux kernel. - Chrome OS EC - Chrome OS EC PD - Chrome OS TBMC - Chrome OS RAMoops BUG=b:72200466 BRANCH=eve TEST=Boot into non-ChromeOS systems (for example Windows) and checked ACPI devices on UI. Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1078211 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28eve: Specify a unique ID for PS2 devicesLucas Chen
Windows certification tests will fail if the PS2 devices are using Plug and Play ID (PNP0303). For all Chromebooks we should use GOOG000A. BRANCH=eve BUG=b:110066056 TEST=AltOS certification test verify. Change-Id: I479471fdb3102e3b492612a4e6ad07612273083a Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1098874 Reviewed-by: Matt Delco <delco@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28334 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23google/chromeec: Add support for "base attached switch" deviceDmitry Torokhov
On some detachables, the mere presence of attached base is not enough to determine whether the device is in tablet mode or not, so we introducing a new "switch" in EC, separate from "Tablet Mode" switch, to signal whether the base is attached or not. We also want the driver to be separate from cros_ec_keyb, so we create a new ACPI device, C(hrome)B(ase)A(ttached)S(witch), with HID GOOG000B, and guard it with EC_ENABLE_CBAS_DEVICE. Change-Id: Id73a12f04a1a48f7fbd9365c2a501afadf3878fa Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28260 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17ec/google/chromeec: Fix ACPI FWTS errorMarc Jones
Fix the following FWTS error: FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line 3038 Line | AML source -------------------------------------------------------------------------------- 03035| Return (One) 03036| } 03037| 03038| Method (_Q09, 0, NotSerialized) // _Qxx: EC Query | ^ | Warning 3115: Not all control paths return a value (_Q09) 03039| { 03040| If (Acquire (PATM, 0x03E8)) 03041| { ================================================================================ ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths do not return a value. All control paths that return must return a value otherwise unexpected behaviour may occur. This error occurs because a branch on an conditional op-code returns a value and another does not, which is inconsistent behaviour. _Q09 is a reserved method and can't return a value. Change the logic so that no return is used and avoid this test error. BUG=b:112476331 TEST=Run FWTS. Change-Id: Ibbda1649ec2eb9cdf9966d4ec92bfd203bb78d07 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-13ec/google/chromeec: de-dup a _UIDMatt Delco
There's two instances od _UID 1 for PNP0C02. This change moves the more system-specific instance of the two to a higher number. I believe these are the 4 I'm seeing. soc/intel/skylake/acpi/systemagent.asl Device (PDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) soc/intel/skylake/acpi/lpc.asl Device (LDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 2) ec/google/chromeec/acpi/superio.asl Device (ECMM) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) ec/google/chromeec/acpi/superio.asl Device (ECUI) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 3) Change-Id: I2b0f1064726a1fa3940ccfb2a4627c79a26684e4 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09src/ec/google/chromeec: Fix typoElyes HAOUAS
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08ec/google/chromeec: add support for retrieving DRAM part numberAaron Durbin
The DRAM part number can be stored in the CBI data. Therefore, add support for fetching the DRAM part number from CBI. BUG=b:112203105 TEST=Fetched data from CBI on phaser during testing. Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-27chromeec: Read EC uptime info on bootJonathan Brandmeyer
Additional diagnostic information about the EC and the most recent reasons why it has reset the AP are read out and logged via printk. This may aid in debugging spurious hangs and/or resets on the AP by providing traceability to the EC when it triggered the reset. Merely knowing that the EC was also recently reset may provide valuable intelligence. See also https://crrev.com/c/1139028. Change-Id: Ie6abe645d5acefb570b9f6a3c4a4b60d5bcd63cd Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://review.coreboot.org/27621 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-27chromeec: Sync ec_commands.h with CrOS upstreamJonathan Brandmeyer
Update ec_commands.h to be a verbatim copy of upstream, except retain the complete copyright notice found in coreboot's copy. Upstream refers to a file not present in coreboot. Change-Id: Ic3daa09ffd83c089b6874e0ea9aab8aa60016775 Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org> Reviewed-on: https://review.coreboot.org/27620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-26ec/google: pass ops to pnp_enable_devices instead of LDN-specific overrideFelix Held
Since ops was passed as override in the pnp_dev_info struct, the generic pnp_ops that was passed to pnp_enable_devices was never used. Change-Id: Id09c6cffb9a0cbbd9189c18801121449c9504422 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27394 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-09src/{ec,include,lib}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-03ec/google/chromeec: Remove keyboard initializationFurquan Shaikh
Since none of the boards using chromeec select DRIVERS_PS2_KEYBOARD now, there is no need to call pc_keyboard_init anymore. This change gets rid of the call and adds an error message in case any mainboard using chromeec tries to select this config. BUG=b:110024487 Change-Id: Ia0b56abe0a5990e527277eaf3397e00dccda3e50 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-02ec/google/chromeec: Remove notify for power buttonFurquan Shaikh
None of the mainboards using Chrome EC set SCI mask for power button. Thus, the EC will never generate SCI for power button events. This change removes the Notify call for power button as part of clean up for getting rid of the power button device in coreboot. BUG=b:110913245 Change-Id: I86c72fd82f1a0e6d5693ebbcd58e2aea808f8817 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-07google/chromeec: Set proper dev opsNaresh G Solanki
For enable_resource & set_resource, use default DEVICE_NOOP so that they are not reported as missing during enumeration. BUG=None BRANCH=None TEST= Build & boot soraka. Change-Id: I0fcfb8df39c6313c8a5bab5b780a8ffa7531d210 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04src/ec: Remove whitespace before tabElyes HAOUAS
Change-Id: Ib47cc1ee617aae74a8cfbcb25c1d0c083196f417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-01ec/google/chromeec: Initialize SMI mask in google_chromeec_events_initFurquan Shaikh
This change adds smi_events to google_chromeec_event_info and allows mainboards to set SMI mask if current boot type is not S3 wakeup. Change-Id: I899a6af6e57d295b4eac2039c8245ebcc73a42bb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-29chromeec platforms: Update ACPI throttle handler callMartin Roth
Currently the throttle event handler method THRT is defined as an extern, then defined again in the platform with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I6337c52edaf9350843848b31c5d87bbfca403930 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-24chromeec: Add support for controlling USB port powerEmil Lundmark
This maps a bit field to the EC (EC_ACPI_MEM_USB_PORT_POWER) that can be used to control the power state of up to 8 individual USB ports. Some Chromeboxes have their GPIO pins for controlling USB port power wired to the EC, so they cannot be accessed directly by coreboot. Change-Id: I6a362c2b868b296031a4170c15e7c0dedbb870b8 Signed-off-by: Emil Lundmark <lndmrk@chromium.org> Reviewed-on: https://review.coreboot.org/26471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08ec/google/chromeec: add config for wake event typesPatrick Georgi
Avoids array overflow Change-Id: Ia49a782ba6729c740e3b91c500120132983f6b3c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/25992 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-03ec/google/chromeec: Update Tablet event callMartin Roth
The tablet event handler method TPET is defined as an extern, then defined again in skylake, the only platform that supports it. In newer versions of IASL, this generates an error, as the method is defined in two places. Remove the extern and the CondRefOf check. That's not needed if we only set the EC_ENABLE_TABLET_EVENT define on platforms that have a TPET handler. Change-Id: I8bee069fc95637446593dfaaae1254e931421517 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-05-01chromeec platforms: Update ACPI thermal event handler callMartin Roth
Currently the thermal event handler method TEVT is defined as an extern, then defined again in platforms with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30cros-ec: Avoid infinitely looping in google_chromeec_pd_get_amodeDaisuke Nojiri
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port is connected to a device with alternate mode(s) and the call is made for the mode with the index higher than 0 (e.g. Zinger). Cros EC manages alternative modes entered in an array (amode[]). The command is designed to accept a query for an particular index and a particular SVID. Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries first time for DisplayPort with index=0, EC says 'no' as expected. AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00) is sent instead because cmd_code is cleared by google_chromeec_command. res.svid is supposed to be 0 when EC hits the last index + 1 but res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to the next index and this repeats forever. Any USB-C device with non-DisplayPort alternate mode can cause this hang unless HDMI port is used. This patch resets all the fields of chromeec_command in each iteration in case google_chromeec_command changes them. BUG=b:78630899 BRANCH=none TEST=Verify Fizz boots without monitors on Zinger. Verify the svid enumeration happens as expected. Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/25878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-01chromeec: fix an uninitialized local variableZhuohao Lee
google_chromeec_command() may only write the 1 or 2 bytes to variable r (4 bytes). However, this api returns 4 bytes data. To avaid returning the incorrect data, we need to initialize the local variable. BUG=b:76442548 BRANCH=none TEST=write 2 bytes data into the flash, then, read by cbi_get_uint32 Change-Id: I3395c97ab6bfd7882d7728310de8a29041190e76 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25460 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09ec/google/chromeec: Add boardid.c to bootblockMartin Roth
Update build so that we can get the board ID in bootblock. BUG=b:74248569 TEST=build and boot grunt with follow-on patch. Bayhub part is disabled. Change-Id: I6353bcb4abcef4e8dc2b625082e33b73525c8525 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-07ec/google/chromeec: Fix typo preventing PD EC firmware inclusionBen Pye
Change-Id: I12ae0d556c43d3d6537cac5d8f640e6a960101ae Signed-off-by: Ben Pye <ben@curlybracket.co.uk> Reviewed-on: https://review.coreboot.org/25017 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
Some type-c monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Also, if an HDMI monitor is connected, no wait is needed. If only an HDMI monitor is connected, currently the API always loops until the stopwatch expires. This patch will make the AP skip DisplayPort wait loop if it detects an HDMI monitor. And if an HDMI monitor is not detected, the AP will wait for DisplayPort mode (like before) but also its HPD signal. This patch also extends the wait loop time-out to 3 seconds. BUG=b:72387533 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I0e1afdffbebf4caf35bbb792e7f4637fae89fa49 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-05ec/chromeec: Fix check for UHEPI supportMatt DeVillier
Commit 1dfc2c3 [google/chromeec: Enable unified host event programming interface] added support for UHEPI, but google_chromeec_is_uhepi_supported() incorrectly treats negative error return codes from google_chromeec_check_feature() as supported. Fix this check to only treat positive return values as supported, as per the original intent. Test: boot google/lulu, verify cbmem console reports UHEPI not supported even if feature check returns error code, verify lid/kb wake events correctly wakes the device from S3/sleep. Change-Id: I7846efb340bc1546b074e8502daf906c444bd146 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24982 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-02ec/google/chromeec: Add note before error messageMartin Roth
When clearing events from the EC, an error is returned when we try to clear an event that doesn't exist. This is normal, but can be distracting when trying to track down an error, so add a message saying that the error is expected. BUG=None Test=Build Grunt with SMM debug enabled. See message before "EC returned error result code 1". Change-Id: Ib2e684e357e821c795de4b59658432c91a8d63fc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/24914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-26ec/google/chromeec: Remove extra newline characters from printkFurquan Shaikh
This change removes extra newline characters from print statements for wake masks. Change-Id: I13cde76bfb0f10b1dda8117c27f2891e909f9669 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/23858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-17chromeec: Sync ec_commands.h for CBI tagsDaisuke Nojiri
This patch syncs ec_commands.h with the one in chromeec. BUG=b:70294260 BRANCH=none TEST=Verify SKU_ID and OEM_ID are correctly recognized on Fizz. Change-Id: I451ec9f6f9d7257915b7d4cb1e5adbee82d107de Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17chromeec: Add google_chromeec_wait_for_displayDaisuke Nojiri
The google_chromeec_wait_for_display API checks whether a display is ready or not. It waits in a loop until EC says it entered DisplayPort alternative mode or times out in 2 seconds. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-17chromeec: Add google_chromeec_pd_get_amodeDaisuke Nojiri
The google_chromeec_pd_get_amode API checks whether TCPM is in a specified alternate mode or not. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-12ec/chromeec: Fix battery ACPI mutex levelMatt DeVillier
Commit 07fe618 [chromeec: Add support for reading second battery info] added a mutex as part of the ACPI code to determine battery statuses. Windows is extremely picky about ACPI code, and attempting to acquire a level 1 mutex without first having acquired a level 0 mutex causes Windows to hang on boot. Since there's no reason to use a level 1 mutex here, change it to level 0. Test: Boot Windows on device with ChromeEC without hanging Change-Id: Icfb0817cfe0c49eb4527a12b507362939a6d32c6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-09chromeec: Fix ACPI compile warningLijian Zhao
For system without secondary battery, current DSDT will report warning during build time. Add a conditional check to make sure only battery index 0 can return success. TEST=Build pass. Change-Id: Iae12c5d1aa749948ef4025c8b5e60c97e1b747a5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23661 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07chromeec: Add support for reading second battery infoNicolas Boichat
We share the same shared memory fields for both batteries. When the host wants to switch battery to read out, it will: - Set BTID (EC_ACPI_MEM_BATTERY_INDEX) to the required index - Wait for BITX (EC_MEMMAP_BATT_INDEX) to have the required value - Then fetch the data BRANCH=none BUG=b:65697620 TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are present, data is valid. Change-Id: Ib06176e6ab4c45a899259f0917e6292121865ed6 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/23598 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-02-05ec/google: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch OEM ID and SKU ID from cros EC. CBI abbreviates Cros Board Info. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-02ec/google/chromeec: Remove wake flag from keyboard IRQDuncan Laurie
The keyboard IRQ was changed to ExclusiveAndWake in order to support waking from suspend-to-idle (S0ix) with commit f611fcfacac5be14a51e04ae4d0b1e25cd5439c0 http://review.coreboot.org/11712 However this is triggering a kernel panic on Windows 10 because it apparently does not like legacy device interrupts to to be set as wake capable. This change is no longer necessary because the linux kernel was changed to always treat the keyboard as wake capable: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/input/serio/i8042.c?id=f13b2065de8147a1652b830ea5db961cf80c09df Change-Id: I26e27de68095f8d176108f39312338522d7cfba0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23563 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-01-30chromeec: Decouple EC tablet event and TBMC deviceFurquan Shaikh
This change decouples EC tablet event and TBMC device by guarding TBMC definition and notification using EC_ENABLE_TBMC_DEVICE. It allows mainboards to use tablet events without having to define a TBMC device. BUG=b:72554519 Change-Id: Ie38b6d68486e8e644dd0d6d406def3ae7fdb5152 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-01-26ec/google/chromeec: Add _PRW property to CREC deviceFurquan Shaikh
This change adds _PRW property to CREC device that allows Linux kernel to identify CREC as a wakeup source. BUG=b:69118395 TEST=Verified following steps: 1. Under sys devices for CREC: "echo enabled > wakeup" 2. Lid close/Lid open -- Verified that wakeup_count increases 3. Mode change -- Verified that wakeup_count increases Change-Id: Ib0a687e171c7e5c81325b39f47c9a2462553fe3e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-01-17google/chromeec: Enable unified host event programming interfaceJenny TC
Unified Host Event Programming Interface (UHEPI) enables a unified host command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events. Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F) is supported for backward compatibility. But newer version of BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT) The UHEPI also enables the active and lazy wake masks. Active wake mask is the mask that is programmed in the LPC driver (i.e. the mask that is actively used by LPC driver for waking the host during suspended state). It is same as the current wake mask that is set by the smihandler on host just before entering sleep state S3/S5. On the other hand, lazy wake masks are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set the active wake mask depending upon the type of sleep that the host has entered. This allows the host BIOS to perform one-time programming of the wake masks for each supported sleep type and then EC can take care of appropriately setting the active mask when host enters a particular sleep state. BRANCH=none BUG=b:63969337 TEST=verify masks with ec hostevent command on S0,S3,S5 and S0ix 1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix 2). suspend_stress_test with S3 and S0ix 3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm wake sources (Lid, power buttton and Mode change) 4). Verified "mosys eventlog list" in S5 resume to confirm wake sources (Power Button) 5). Verified above scenarios with combination of Old BIOS + New EC and New BIOS + Old EC Change-Id: I4917a222c79b6aaecb71d7704ffde57bf3bc99d9 Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/21085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-08chromeec: Add command to override charger limitDaisuke Nojiri
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which overrides the max input current and voltage when a barrel jack adapter supplies power. BUG=b:64442692 BRANCH=none TEST=Boot Fizz. Use chgsup console command to verify the max current and voltage are set as expected. Change-Id: I8c6fc54e519ce13e3db82ee2cecaa96c6eb42d8a Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08cr50: Make EC clear AP_OFF before hibnernateDaisuke Nojiri
This patch makes AP send EC_REBOOT_HIBERNATE_CLEAR_AP_OFF, which makes EC clear AP_OFF flag then hibernate. This is needed to make Chromebox boot when cr50 toggles the EC's reset line after TURN_UPDATE_ON command. BUG=b:69721737 BRANCH=none CQ-DEPEND=CL:802632 TEST=Verify Fizz reboot after cr50 update. Change-Id: I5f590286393ac21382cab64afdccae92d3fc14ba Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-30chromeec: Notify CREC device of wakeup eventsFurquan Shaikh
Whenever there is a new EC event that could be wake-capable, notify CREC device of this using notification value 0x2 i.e. device wake. This allows Linux kernel to track active_count value correctly for CREC device. BUG=b:69118395 BRANCH=None TEST=Verified on Soraka: 1. Put device into suspend 2. Wake up using mode change/lid open 3. Check that the active_count for GOOG0004 has increased (cat wakeup_sources | grep GOOG0004) Change-Id: I723f7f4e4c99e7a5b57c6296da66cf30cd413c27 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
ChromeEC is getting ready to bump up the hostevents and wake masks to 64-bits. The current commands to program hostevents/wake masks will still operate on 32-bits only. A new EC host command will be added to handle 64-bit hostevents/wake masks. In order to prevent individual callers in coreboot from worrying about 32-bit/64-bit, the same API provided by google/chromeec will be updated to accept 64-bit parameters and return 64-bit values. Internally, host command handlers will take care of masking these parameters/return values to appropriate 32-bit/64-bit values. BUG=b:69329196 Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-20chromeec: Add function to retrieve usb c charger infoShelley Chen
Add google_chromeec_get_usb_pd_power_info(), which will call the EC_CMD_USB_PD_POWER_INFO host command to retrieve the current and voltage info of the usb c charger. Returns power info in watts. BUG=b:37473486 BRANCH=None TEST=output debug info to make sure that correct power is returned. Change-Id: Ie14a0a6163e1c2699cb20b4422c8062164d92076 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19google/chromeec: Do not set wake mask before logging EC eventsFurquan Shaikh
Earlier the EC expected the host to set appropriate masks before reading host events. However, with recent change in EC, this is no longer required. This change removes the setting of wake_mask before and after reading the host events. However, in order to support older versions of EC, a new feature flag is added on the EC side that informs the host whether or not it is using the new way of reporting host events without having to set wake mask. CQ-DEPEND=CL:719578 TEST=Verified that EC wake events are correctly logged with both old and new versions of EC. Change-Id: Ib17e1296fb7d3bbc84fc7581fd0a9bd179ac87b9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22006 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19ec/google/chromeec: Export google_chromeec_log_events in ec.hFurquan Shaikh
This change makes google_chromeec_log_events available to callers outside ec.c. BUG=b:67874513 Change-Id: I36cc1e66e035eda707297d8153cd3fabeadfee45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18google/chromeec: Drain all MKBP events while clearing host eventsFurquan Shaikh
EC maintains a FIFO of all MKBP events and sets host event whenever a new entry is added to the FIFO. Clearing only the host event for MKBP creates an inconsistent state where there are pending MKBP events in the FIFO but host event for MKBP is cleared. In order to maintain a consistent view, host should clear all MKBP events in the FIFO if host event is being cleared. This change drains out all the MKBP events in the FIFO when clear_pending_events is called. TEST=Verified by adding debug logs in EC to verify that all the MKBP events that occur before clear_pending_events is called get cleared from the FIFO. Change-Id: I131722dc01608dff30230fe341e6b23ae4cc409e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-18google/chromeec: Add new helper function to read MKBP eventsFurquan Shaikh
This change adds a new helper function google_chromeec_get_mkbp_event that allows coreboot to query EC for the next available MKBP event. Change-Id: Ia6d64586ca62378d08025c96c2689c00c816041f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-08ec/google/chromeec: Add library function google_chromeec_events_initFurquan Shaikh
mainboard_ec_init implemented by all x86-based mainboards using chromeec performed similar tasks for initializing and recording ec events. Instead of duplicating this code across multiple boards, provide a library function google_chromeec_events_init that can be called by mainboard with appropriate inputs to perform the required actions. This change also adds a new structure google_chromeec_event_info to allow mainboards to provide information required by the library function to handle different event masks. Also, google_chromeec_log_device_events and google_chromeec_log_events no longer need to be exported. Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-04chromeec: Remove checks for EC in RODaisuke Nojiri
This patch removes checks that ensure EC to be in RO for recovery boot. We do not need these checks because when recovery is requested automatically (as opposed to manually), we show 'broken' screen where users can only reboot the device or request recovery manually. If recovery is requested, Depthcharge will check whether EC is in RO or not and recovery switch was pressed or not. If it's a legitimate manual recovery, EC should be in RO. Thus, we can trust the recovery button state it reports. This patch removes all calls to google_chromeec_check_ec_image, which is called to avoid duplicate memory training when recovery is requested but EC is in RW. BUG=b:66516882 BRANCH=none CQ-DEPEND=CL:693008 TEST=Boot Fizz. Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-26chromeec: Provide helper routine to read boardid from Chrome ECFurquan Shaikh
Instead of duplicating the code across multiple mainboards, provide a helper function to read boardid from Chrome EC. Change-Id: I2008de7032bc880e90b2c3c385b2a67bfb8724cc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-13ec/google: Add command to set APU SKU ID to ECKevin Chiu
EC needs to have command to set SKU ID from APU to support specific feature (ex: keyboard backlight) for variant board. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30ec/google: Use feature flag layout that matches the EC host commandPatrick Georgi
The EC side of the feature bits in ACPI EC space isn't stable yet, and we're now going for matching them up with the EC host command of the same purpose. Change-Id: I9c1f0e5390e840ea0c32315a3da8eea6f3e12f54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22ec/google: Detect keyboard backlight at runtimePatrick Georgi
This enables adding the backlight driver to boards that may or may not come with a keyboard backlight function. It's the responsibility of the EC to report if that feature exists, but that's not a big extra burden given that it already keeps track of everything else related to the backlight. BUG=b:64705535 BRANCH=none CQ-DEPEND=CL:620595 TEST=configured KBLE manually and noticed the presence/absence of /sys/devices/platform/GOOG0002:00/ on a Chrome OS Linux kernel, corresponding to the value reported by the EC. Change-Id: Idc36bfaa6e69581ba19b52d37af6956f63cfdb8f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15ec/google: Add command to fetch SKU ID from ECPatrick Georgi
BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I82e324407b4b96495a3eb3d4caf110f9eae05116 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-11ec/google: update ec_commands.hPatrick Georgi
Copy from chrome-ec codebase, except for keeping the long-form license header. BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I513123547f3854945e827d2f7f6c0df6591886eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20945 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-01ec/google/chromeec: Add support for EC device eventsDuncan Laurie
Add support for the new EC device event interface which is used to report events from devices that are connected behind the EC. This can be used to differentiate wake sources from the EC in the case that the EC has the wake pins from various devices. This can be used in case the AP is unable to directly wake from the device itself, for example when using the Deep S3 state on Intel platforms only a few pins can directly wake the AP. BUG=b:30624430 TEST=build google/* boards that use chrome EC. Feature is used and tested further in a subsequent commit. Change-Id: I5126c6d6ffb6b0ef6e8db8dcd5aec62db925a371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01ec/google/chromeec: Sync header with Chromium EC codebaseDuncan Laurie
Update this header from the upstream source so new host commands can be used in coreboot. https://chromium.googlesource.com/chromiumos/platform/ec commit bbb759ceaa843f548f90c35d1668e17c8879bad3 BUG=b:30624430 TEST=build google/* and intel* boards Change-Id: I56c9f891262d8984b6a9a69d96752c2dd6bb2371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-28src/ec: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: Ic2cdfa08cdae9f698eb2f8fa4c4ae061f1a7d903 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-02ec/google/chromeec: Fix typo in ECUI deviceDuncan Laurie
The IO region defined for EC_HOST_CMD_REGION1 was incorrectly using EC_HOST_CMD_REGION0 for the range maximum so the region was showing a minimum of 0x880 and a maximum of 0x800. Both min and max should report the same value as this region is fixed and cannot be relocated by the OS. Change-Id: I387b1c36aa115e03d0c6f9939eb13c93b14ad909 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05ec/google/chromeec: provide reboot functionAaron Durbin
Provide a common function to issue reboot commands to the EC. Expose that function for external use and use it internal to the module. BUG=b:35580805 Change-Id: I1458bd7119b0df626a043ff3806c15ffb5446c9a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19573 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
Instead of defining a separate LID device for mainboards using chromeec, define EC_ENABLE_LID_SWITCH for these boards. Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22google/chromeec: Ensure \_SB.LID0 is present before using itFurquan Shaikh
Since we want to support devices that do not have a lid but still use EC, we need to conditionally check if referencing \_SB.LID0 is valid. BUG=b:35775024 Change-Id: I92433460ec870fb07f48e67a6dfc61e3c036a129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18941 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>