summaryrefslogtreecommitdiff
path: root/src/ec/google
AgeCommit message (Collapse)Author
2020-02-18ec/google/chromeec: Add SSDT generator for ChromeOS ECTim Wawrzynczak
Upcoming patches for the Linux kernel (5.6 ?) would like to consume information about the USB PD ports that are attached to the device. This information is obtained from the CrOS EC and exposed in the SSDT ACPI table. Also, the device enable for this PCI device is moved from ec_lpc.c to a new file, ec_chip.c, where EC-related ACPI methods can live. It still allows other code to call functions on device enable (so that PnP enable for the LPC device still gets called). BUG=b:146506369 BRANCH=none TEST=Verify the SSDT contains the expected information Change-Id: I729caecd64d9320fb02c0404c8315122f010970b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17vboot: push clear recovery mode switch until BS_WRITE_TABLESJoel Kitching
Serves two purposes: (1) On some platforms, FSP initialization may cause a reboot. Push clearing the recovery mode switch until after FSP code runs, so that a manual recovery request (three-finger salute) will function correctly under this condition. (2) The recovery mode switch value is needed at BS_WRITE_TABLES for adding an event to elog. (Previously this was done by stashing the value in CBMEM_ID_EC_HOSTEVENT.) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-01ec/google/wilco: Set cpu id and cores to ECEric Lai
Set CPU ID and cores to EC then EC will adapt power table according to the CPU ID and number of cores. BUG=b:148126144 BRANCH=None TEST=check EC can get correct CPU id and cores. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I23f5580b15a20a01e03a5f4c798e73574f874c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38566 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01ec/google/chromeec: Add new wrappers for host commandsTim Wawrzynczak
Add new functions to get (from the EC): 1) The number of USB-PD ports 2) The capabilities of each port (EC_CMD_GET_PD_PORT_CAPS) BUG=b:146506369 BRANCH=none TEST=Instrumented calls to these and verified the data Change-Id: I57edbe1592cd28b005f01679ef8a8b5de3e1f586 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-01ec/google/chromeec: Add new host command, EC_CMD_GET_PD_PORT_CAPSTim Wawrzynczak
The new host command provides these static capabilities of each USB-PD port: 1) Port number 2) Power role: source, sink, dual 3) Try-power role: none, sink, source 4) Data role: dfp, ufp, dual 5) Port location: these come from power_manager BUG=b:146506369 BRANCH=none TEST=compiles Change-Id: I923e4b637a2f41ce173d378ba5030f1ae8c22222 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27ec/google/wilco: add ec command set cpu idEric Lai
Add new mailbox command support. Set CPU ID and cores to EC. EC will according to different CPU to set different power table. BUG=b:148126144 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I135d2421d2106934be996a1780786f6bb0bf6b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-01-22ec/google/chromeec: add support for fw_config cbi fieldJett Rink
The firmware configuration (fw_config) field is store in the CBI EEPROM and it should be used to make firmware customization instead of sku/variant id. BUG=b:145519081 TEST=builds Change-Id: I790998a29e724ecdff8876cca072267537b7cea6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-01-22ec/google/chromeec: update ec_commands.hJett Rink
Copy ec_commands.h directly from Chromium OS EC repo at sha e57217a250. This is needed for the FW_CONFIG CBI field definition. Change-Id: Id010721033ebe32ac9c9482d666cf790442a26ee Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-01-18ec/google/wilco: Set minimum UCSI_ACPI region lengthBernardo Perez Priego
IMD provides support for small and large allocations. Region IMD Small memory is 1 KB with 32 Bytes alignment, this region holds smaller entries without having to reserve a whole 4 KB page. Remaining space is assigned to IMD Large to hold various regions with 4 KB alignment. The UCSI kernel (kernel version 4.19) driver maps the UCSI_ACPI memory as not cached. Cache mapping is set on page boundaries and all IMD Small is within the same page. If another driver maps the memory as write-back before the UCSI driver is loaded then the UCSI driver will fail to map the memory as not cached. Placing UCSI_ACPI in IMD Large region will prevent this mapping issue since it will now be located within its own page. This patch will force UCSI_ACPI region to be located in IMD Large region. BUG=b:144826008 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Id00e76dca240279773a95c8054831e05df390664 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38414 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/{skylake,common}/acpi/dptf/thermal.asl: Prevent iasl remarksWim Vervoorn
Prevent iasl remarks about unused parameters. BUG=N/A TEST=build Change-Id: I54fa4712e618038fdd5a96c2012c2ec64ca34706 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-29ec/google/chromeec: ignore LIMIT_POWER based on command code in responseRizwan Qureshi
Assume that LIMIT_POWER is not requested if the ec does not support it. Do this by checking the command code in the response message instead of return value. BUG=b:146165519 BRANCH=None TEST=Boot puff with EC which does not support LIMIT_POWER param. Change-Id: Ib2f5f69a53f204acebfab3e36aab2960eeec1204 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-27ec/google: Fix wedging AP on early ec sw syncTim Wawrzynczak
If the EC doesn't support the EARLY_EC_SYNC we don't properly set power limits to reasonable defaults and can wedge the AP by browning out at the end of vboot. BRANCH=none BUG=b:146165519 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4e683e5a1c5b453b3742a12a519cad9069e8b7f7 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37930 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19src/{drivers,device,ec}: Remove unused <stdlib.h>Elyes HAOUAS
Change-Id: I05422ee4b0aa5c02525ef0b4eccb4dc3ecf871e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32822 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-17src: Conditionally include TEVTFrans Hendriks
ACPI method TEVT is reported as unused by iASL (20190509) when ChromeEC support is not enabled. The message is “Method Argument is never used (Arg0)” on Method (TEVT, 1, NotSerialized), which indicates the TEVT method is empty. The solution is to only enable the TEVT code in mainboard or SoC when an EC is used that uses this event. The TEVT code in the EC is only enabled if the mainboard or SoC code implements TEVT. The TEVT method will be removed from the ASL code when the EC does not support TEVT. BUG=N/A TEST=Tested on facebook monolith. Change-Id: I8d2e14407ae2338e58797cdc7eb7d0cadf3cc26e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-16ec/google/chromeec/acpi: move PS2K under PCI0Matt DeVillier
Commit 77ad581ce [chromeec: PS2K node can't be under SIO node] moved the PS2K ACPI device from under the SIO device to under the LPCB, and while this fixed the keyboard under Windows for Skylake devices, it was insufficient for Baytrail and Braswell devices (and likely Apollo Lake/Gemini Lake too). Moving the PS2K device under PCI0 allows the PS2K to be functional under Windows for all Chrome-EC platforms. Test: build/boot various Chrome-EC devices from IVB, HSW, BDW, BYT, SKL, BSW, and KBL platforms, verify keyboard functional under both Linux (4.x and 5.x) and Windows 10. Change-Id: If773eea69dc46030b6db9d64c3855be49951d4c0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37542 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02ec/google/wilco: Add EC ACPI methods for privacy screenMathew King
Add ACPI methods to the Wilco EC for controlling a privacy screen on the device. BUG=b:142237145, b:142656363 TEST=none Change-Id: Ic3c136f9d2de90eeb3c9e468e4c7430ccf6dcc42 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36044 Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-29ec/google/chromeec: Drop CAR_GLOBAL_MIGRATION supportArthur Heymans
Change-Id: I09bca1897920871a6b29c25dc2bad94a8061da29 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37038 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-18include: Make stdbool.h a separate fileJulius Werner
This patch moves the traditional POSIX stdbool.h definitions out from stdint.h into their own file. This helps for using these definitions in commonlib code which may be compiled in different environments. For coreboot everything should chain-include this stuff via types.h anyway so nothing should change. Change-Id: Ic8d52be80b64d8e9564f3aee8975cb25e4c187f5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-09ELOG: Introduce elog_gsmi variantsKyösti Mälkki
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate. Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04include: Remove EC_EVENT_* from elog.hYu-Ping Wu
All of the EC_EVENT_* macros can be replaced with the EC_HOST_EVENT_* macros defined in ec_commands.h, which is synchronized from Chromium OS ec repository. BRANCH=none BUG=none TEST=emerge-kukui coreboot Change-Id: I12c7101866d8365b87a6483a160187cc9526010a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-10-31ec/google/chromeec: Add EC driver support for software syncTim Wawrzynczak
Quite a few new functions added here in order to support the use-case of performing EC software sync within coreboot. Most of these functions are related to retrieving the EC's hash, and writing a new image into the EC's flash. BUG=b:112198832 BRANCH=none TEST=With whole patch series, successfully performed EC software sync Change-Id: I0d3c5184dbe96f04b92878f2c19c7875503a910a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-29ec/google/chromeec: Clean up ec.[ch]Tim Wawrzynczak
Change all uN integral types to uintN_t. Make the names of host command params/responses consistent. Use static struct initialization to ensure all fields are initialized. BUG=none BRANCH=none TEST=compiles Change-Id: Ibe1e29e88975c85eea215adedc5f5e483243e0d6 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-25ec/{compal,google,quanta}: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Change-Id: If3ee38f3eaa8e6d1c1b0393d0ba289f708e0ae5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36293 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24(acpi) superio.asl: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Found-by: ACPICA 20191018 Change-Id: Ic0bcaa37ac017ab61e1fb4e78d3c7dfbbcc0899d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-10-24ec/google/chromeec/acpi: Drop wrong _ADR objectElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Change-Id: Ieb54664a6528ce67634991f64a5f3c411822cdf4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36260 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-09ec/google/chromeec: fix format security warningGreg V
Change-Id: I7a7bcb56523d595e8d4f32849aac53d66d416a12 Signed-off-by: Greg V <greg@unrelenting.technology> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35866 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03ec/google/chromec: Default EC_GOOGLE_CHROMEEC_LPC to disabledMartin Roth
Don't set a default bus type for the Chrome EC on x86. The platform must select the bus, typically LPC or ESPI. BUG=b:140055300 TEST=Build tested only Change-Id: I736cb9e43292a1b228cd083ca81a8e5db383e878 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-163rdparty/chromeec: Update to latest masterElyes HAOUAS
It's been some time and there are 1420 new commits. Including one that allows reproducible builds \o/ and one that breaks building with empty $(CC) :-/ Change-Id: I5e81d5a2f1018481b9103fc5a1f4b8c72fb9deec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30679 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02vboot: remove fastboot supportJoel Kitching
Fastboot support in vboot_reference is unused, unmaintained, and produces compile errors when enabled. Since there is no current or planned use cases for fastboot, remove it. BUG=b:124141368, chromium:995172 TEST=make clean && make test-abuild BRANCH=none Change-Id: I06ea816ffb910163ec2c3c456b3c09408c806d0b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35002 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30ec/google/chromeec: Add config option for eSPIMartin Roth
The Intel platforms using eSPI EC communication have just been enabling the EC_GOOGLE_CHROMEEC_LPC option for simplicity. This does basically the same, but at least marks it as eSPI in Kconfig for clarity. BUG=b:140055300 TEST=Build tested only. Change-Id: Ib56ec9d1dc204809a05c846494ff0e0d69cf70ea Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35128 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
These are required to cover the absensce of .data and .bss sections in some programs, most notably ARCH_X86 in execute-in-place with cache-as-ram. Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-23google/chromeos: Support AP watchdog flag from Chrome ECYou-Cheng Syu
After ChromiumOS CL:1293132 and CL:1295890, Chrome EC can store the flag telling if the last reboot was triggered by AP watchdog for some boards (e.g., Kukui). This CL adds a new function google_chromeec_get_ap_watchdog_flag(), which reads the AP watchdog flag from Chrome EC, and updates the tables of reset causes and reset flags. A new Kconfig option CHROMEOS_USE_EC_WATCHDOG_FLAG is added for elog_handle_watchdog_tombstone() to determine if watchdog reset was triggered by the AP watchdog flag from EC instead of the tombstone in AP. BUG=b:109900671,b:118654976 BRANCH=none TEST=test with https://review.coreboot.org/c/coreboot/+/31843 Change-Id: I7a970666a8c6da32ac1c6af8280e808fe7fc106d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-23ec/google/chromeec: Update ec_commands.hYou-Cheng Syu
Copy ec_commands.h directly from ChromiumOS EC repository (CL:1520574). Since ec_commands.h already defines usb_charge_mode and only USB_CHARGE_MODE_DISABLED is used in coreboot, enum usb_charge_mode is removed from ec.h. To avoid redefinition of the BIT macro, #ifndef check is added to include/types.h. BUG=b:109900671,b:118654976 BRANCH=none TEST=emerge-kukui -j coreboot Change-Id: I7ed5344fc8923e45e17c3e2a34371db6f80b079d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31885 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21chromeec: Depend on events_copy_b to identify the wake sourceRavi Chandra Sadineni
google_chromec_get_event() depends on the main copy of EC which is used by ACPI subsytem in the kernel for querying events. google_chromeec_get_event() also clears the event from EC. Thus if the kernel has to identify the wake source, it has no way to do that. Thus instead depend on events_copy_b to log the wake source. Please look at go/hostevent-refactor for more info. BUG=b:133262012 BRANCH=None TEST=Hack hatch bios and make sure hostevent log is correct. Change-Id: I39caae2689e0c2a7bec16416978877885a9afc6c Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-20src/ec: Drop __PRE_RAM__ and __SMM__ guardsKyösti Mälkki
For files built in ramstage and smm -classes, testing for !__PRE_RAM__ is redundant. All chip_operations are exluded with use of DEVTREE_EARLY in static devicetree, so garbage collection will take care of the !__SMM__ cases. Change-Id: Id7219848d6f5c41c4a9724a72204fa5ef9458e43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-20devicetree: Remove duplicate chip_ops declarationsKyösti Mälkki
These are only referenced inside auto-generated static.c files, and util/sconfig also generates the declarations automatically from source file pathnames. Change-Id: Id324790755095c36fbeb73a4d8f9d01cdf6409cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34979 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-19ec/google/chromeec: Use MAYBE_STATICKyösti Mälkki
Change-Id: I4c6238b0e5f41fcc667baf6b486c7fff4c90a7cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34944 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25ec/google/wilco: Hide wilco symbols when unusedElyes HAOUAS
This cleans up .config file from unused wilco symbols. Change-Id: I813d3fe57b97e2c1ba67e1e3674de256c2529029 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34539 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18ec/google/chromeec: Pass reference of object to BBST() methodDuncan Laurie
The BBST() method writes an updated status flag mask that is intended to be stored back in the battery object. This value needs to be passed as a reference to an object to prevent it from being evaluated at the time the method is loaded or it will not actually update the BSTP value in the battery device. This was tested by instrumenting the _BST method in the primary battery and ensuring the value can be updated by the BBST method. Change-Id: Ia8e207a2990059a60d96d8e0f3ed3c16a55c50f4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-22src/ec: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Change-Id: Ifdb2dee08da45d698174583ee5ed44bf5a0243ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-21ec/google/chromeec/ec_lpc: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I98d0ab0d139186b312e8c1086c475ba6ef0b7d3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-13ec/google/wilco: Read back from EC RAM after S0ix entryDuncan Laurie
We are seeing an EC interrupt after setting the EC RAM offset that indicates that the EC should transition to S0ix mode and this is preventing the kernel from going into S0ix on the first try. As a workaround if we read back from the EC RAM while still in the _DSM handler it seems to prevent this problem. BUG=b:130644677 BRANCH=sarien TEST=ensure s0ix entry works on the first try with sarien Change-Id: Id607c4c2b14b79d0cd1bcea0c2032be2f2c0c141 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33455 Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-07ec/google/wilco: Add UCSI supportDuncan Laurie
This change adds support for the UCSI specification in order to provide information about the Type-C port and an interface to perform power and data role swap. This change is split across the DSDT and SSDT, with the shared memory and operation region declared in the SSDT after being allocated in CBMEM. The OS will fill in the registers in the system memory region and then call the _DSM method wtih a read or write argument. The DSM method will copy the required registers to/from the system memory and the EC and perform the write or read action. Responses from the EC will generate a new SCI with event code 0x79 which will notify this UCSI ACPI device and the OS driver will take action to read status from the EC. BUG=b:131083691 Change-Id: I438a2bdfaf6720acd8354e0339dcef2844b63a4e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-24ec/google/wilco: Fix radio control commandDuncan Laurie
This command is working as written, but it is not actually correct as to what the format of the command should be. Fix this and add define the other radios. There is no change in the command send to the EC. Change-Id: Ia551b08561b673d27bec2f900d97b746699b30c4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-05-22ec/google/wilco: set diagnostic LEDs on boot failureKeith Short
On Wilco devices, if any of the coreboot stages fails with a fatal error, set the diagnostic LEDs with the Wilco EC. The last saved post code is used to determine the error code sent to the EC. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). TEST=Forced a fatal error in both bootblock and verstage to confirm diagnostic LEDs during these stages. This works on cold-boots only. Bug b:132622888 tracks the mailbox failures on warm boots. Change-Id: If865ab8203f89e499130f4677fec166b40d80174 Signed-off-by: Keith Short <keithshort@chromium.org> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18ec/google/wilco: Support board_id with EC provided IDDuncan Laurie
The EC can return a board ID value similar to the Chrome EC. In order to use this for the board version returned by SMBIOS this commit implements the board_id() function for mainboards that use this EC. BUG=b:123261132 TEST=Check /sys/class/dmi/id/board_version to see that it is reflecting the value that the EC provides. Change-Id: I3fbe0dc886701f37d2424fe7a2867fd860fa1ec0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32276 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18ec/google/wilco: Send "logo displayed" progress codeDuncan Laurie
This progress code enables keyboard backlight control that otherwise would only work 30 seconds after boot. This code is already defined but it was not being sent by coreboot. It is run in the "post device" step between the other defined progress codes. BUG=b:130754032 Change-Id: Ica6c622e568cb236c17bf3edb6639d0177510846 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-28ec/google/wilco: Add ACPI _BIX method for batteryDuncan Laurie
I added a method to fill out the _BIX package structure but never hooked it up to the expected _BIX method that the OS uses. This change adds _BIX method and uses the existing method to fill it out. It also adds ^ before the _UID in _BIF to match _BIX as the _UID is one level above the method. Change-Id: I0de91369b6780fd9432990732c1078a73f6a3419 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28ec/google/wilco: Add a romstage init function to send progress codeDuncan Laurie
When using FSP with debug enabled it takes too long to get to ramstage and send the first progress code to the EC. The same thing has been reported to happen when 2x16GB memory is installed. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5676354f5e53540273a9029411507f91864735a1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-21Revert "UPSTREAM: ec/google/wilco: Enable software sync for VBOOT"Duncan Laurie
This reverts commit 51169b7dda4a1978d622e329a1c40e384471c165. I was not ready to enable this option yet, until it is enabled in depthcharge it needs to stay off in coreboot or depthcharge will attempt to do software sync without a proper driver. Change-Id: I4840812d0541f822502cfc5c66bed27edf4d2ecc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32007 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21ec/google/wilco: Add function to indicate if EC uses signed FWDuncan Laurie
This will be used to distinguish the mainboard SKU so that the correct EC firmware can be bundled with the board. This is read from EC RAM so it can be used by an ACPI method in the future. BUG=b:119490232 Change-Id: I71b8017fc4b88e793dfe709e1cb1ab0f0bcdc4fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Enable software sync for VBOOTDuncan Laurie
Enable software sync by default if VBOOT is enabled. The slow update option is also needed, but this is moving to depthcharge so it is not defined here. Change-Id: I046661fae7315f84e96293532b4e1568558df962 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Fix handling of commands that do not respondDuncan Laurie
If the command does not respond the driver should not wait for it to complete before returning. Tested with SMI debug enabled to ensure that the final command does not report a failure. Change-Id: I7c1bfa19a92e8332ac1aa6ff95f94ff4cbdf789d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-15ec/google/wilco: Clear S0ix support bit at bootDuncan Laurie
To ensure the power button functions as expected in firmware ensure that the EC is not in "S0ix supported OS" mode and expecting the power button to be handled by the virtual button interface. BUG=b:128409889 TEST=Verify that the power button works at the developer screen when the system is rebooted from within Chrome OS. Also ensure that it works when external warm reset signal is asserted by H1. Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-15ec/google/wilco: coalesce tent mode to tablet modeJett Rink
Both tent mode (0x01) and tablet mode (0x02) should be considered tablet mode by ChromeOS. BRANCH=none BUG=b:122052438 TEST=ChromeOS enters tablet mode when lid angle exceeds 180 Change-Id: I89ba8141350fc628c8cff89d5f33aa47c6ae6afe Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04Fix indirect include for endianessKyösti Mälkki
The function (preprocessor macro) we need is defined in <endian.h> not <swab.h>. Change-Id: I3a86c7050bf853e3a56a15421132240e19f40912 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-27ec/google/chromeec: fix the error status passingYH Lin
Various instances of google_chromeec_command() can return non-zero number (both positive and negative) to indicate error -- fixing cbi_get_uint32() and cbi_get_string() so they follow the same convention. BUG=b:123676982 BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I7f0a8a61d01d942cba57036a17dd527fdbbf940c Reviewed-on: https://review.coreboot.org/c/31585 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-26ec/google/chromeec: Clarify return value of google_chromeec_commandDaisuke Nojiri
This patch clarifies the definition of google_chromeec_command. Currently absence of the definition isn't causing any problem because wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an interface which returns only negative error codes. However, there is a chance that a new wrapper API will be addedl which check 'ret < 0' to catch errors, assuming other interfaces behave the same. Or existing wrapper APIs will be broken as soon as they're compiled for another interface. BUG=chromium:935038 TEST=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f Reviewed-on: https://review.coreboot.org/c/31613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-25ec/google/wilco: Fix ACPI power status eventsDuncan Laurie
This change fixes the power status events for AC and battery events from the EC. The register that was being used is not returning the expected information. BUG=b:125472740 TEST=enable ACPI debug in the kernel and verify that AC and battery insert/remove are detected properly. Change-Id: I15f71fcf0ca6aa9438e951865787c9fc273792d8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data. On this platform, interrupts are routed via the GPIO controller so need to be registered using GpioInt instead of Interrupt. BUG=b:123750725 BRANCH=grunt TEST=MKBP events still received (with matching EC and kernel changes) Change-Id: If499d24511bbaa7054207b7e0b98445723332c4f Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/c/31278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-02-05ec/google/wilco: Add virtual button supportDuncan Laurie
Add an ACPI device that is compatible with the Intel Virtual Button kernel driver for reporting tablet mode state and various virtual button events that may come from the EC. This driver is used in Windows and in the Linux kernel at drivers/platform/x86/intel-vbtn.c Because of a check in the kernel driver it expects the board to define the SMBIOS enclosure type as convertible for the check at driver load time for tablet/laptop and dock/undock to work. The virtual tablet mode button will proxy the tablet mode state sent from the Sensor Hub to a SW_TABLET_MODE event in the kernel. The virtual power button is used during S0ix for the EC to wake the system with an SCI. There are separate press and release events which are sent for completeness, although the kernel driver will ignore the release event. BUG=b:73137291 TEST=Test that the power button can wake the system from S0ix. Also verify that the device is reported as laptop mode at boot. Change-Id: I0d5dc985a3cfb1d01ff164c4e67f17e6b1cdd619 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31208 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-04ec/google/wilco: Add ACPI device for event interfaceDuncan Laurie
Add a separate ACPI device for the Wilco EC event interface so that the OS drivers can bind to it separately. Since the event handling is all done with ACPI and not mailbox calls this will be implemented as a standard acpi_driver in the kernel. BUG=b:119046283 TEST=veriy device exists in DSDT Change-Id: I5259a926fb6d5faea835bcdefa12f0184c5adf4a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-04ec/google/wilco: Add S0ix support handlersDuncan Laurie
1) In the EC _REG method set the flag indicating S0ix support in the OS. 2) Add a function that can be called by the LPI _DSM method to indicate to the EC that the OS is entering or exiting S0ix. BUG=b:73137291 Change-Id: Iddc33a08542a6657694c47a9fda1b02dd39d89f7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31094 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30ec/google/chromeec: Add boardid.c to verstageYou-Cheng Syu
Modifiy Makefile so that we can get board ID in verstage. BRANCH=none BUG=b:117916698 TEST=manually Change-Id: Idcdb6e07f565c937185cab811abac0ce47e5e3a7 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-24ec/google/wilco: Turn on wake up from lidLijian Zhao
Send required EC command to enable ACPI S3 wake up from lid switch. BUG=b:120748824 TEST=Put Sarien system into S3 and then wake up from lid switch successful. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I13f3469847b0886147b8b624311a1ece796f847b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-28ec/chromeec: fix LPC read/write for MEC devicesMatt DeVillier
Commit 8cf8aa2 [ec/google/chromeec: Use common MEC interface] changed the return mechanism for the checksum on reads/writes for MEC devices, but incorrectly handled the passed-in csum parameter by not dereferencing. This led to the returned csum value always being zero, which causes all EC commands with non- NULL data_in to fail with a checksum error. Fix this by storing the returned checksum in a temp variable, and only assigning to csum when the pointer isn't NULL; Test: build/boot google/chell, verify EC hello command succeeds, keyboard backlight turned on at boot. Change-Id: I7122c3fdc5a19f87f12975ee448728cf29948436 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-04ec/google/wilco: Turn camera power onDuncan Laurie
Send the EC command required to turn the camera power on and verify that it shows up on the USB bus. Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Guard DTPF with ifdefDuncan Laurie
There is a dependency issue with the EC DPTF code accessing methods that are external, but once the mainboard includes the relevant code they become internal and the current version of IASL used by jenkins will fail to compile it. Until the new IASL is deployed everywhere wrap the EC DPTF code and expect that the mainboard will explicitly enable it. Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco/acpi: Add DPTF supportDuncan Laurie
Add the support needed for DPTF. This includes the methods to write trip point values, read temperatures, and handle events. This was tested on a sarien board by inspecting AML debug output with the kernel while monitoring temperatures and trip points in sysfs and controlling temperatures with a fan to ensure that when a trip point is crossed an SCI is generated and the event is handled properly. Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29761 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco/acpi: Fix issues and clean upDuncan Laurie
- Disable debug output from read/write methods by default - Use argument to _REG to disable SCI when EC is unregistered - Change read/write macros to sync level 2 so they can be called when a mutex is already held - Define some missing events Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29760 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Fix extended event handlingDuncan Laurie
Extended events will be handled by the OS kernel driver, but that driver needs a method exposed by ACPI to read the event data from the EC and into a buffer. Tested by generating a hotkey event and reading the buffer from the Linux kernel driver with acpi_evaluate_object(). Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29674 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable WiFi radioDuncan Laurie
Add EC command to enable WiFi radio and send that command at startup. Tested to ensure WiFi is functional on a sarien board. Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29673 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable COM1 ACPI deviceDuncan Laurie
Enable the COM1 ACPI device based on the existing Kconfig option CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to also define another value for ACPI. Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29672 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16ec/google/chromeec: add support for retrieving OEM nameWisley Chen
OEM name can be stored in CBI. This change can support for fetching the OEM name from CBI. BUG=b:118798180 TEST=Verified to get data from CBI Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-15google/chromeec/acpi/ec: Add support for Device DPTF Profile NumberKarthikeyan Ramasubramanian
In order to support Multi-DPTF profile, Device DPTF Profile Number is introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset 0x09. This bit field stays along with Tablet Mode Device flag. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-12ec/google/chromeec: Configure EC_SYNC_IRQ as level triggeredFurquan Shaikh
EC_SYNC_IRQ from EC to host is level-triggered in practice and configuring it as edge-triggered on the host results in host missing events if there are multiple events queued on the EC side. This is because Linux kernel driver reads one event per irq and the EC does not de-assert the interrupt line until all events are drained out. This results in event queue being filled up completely on the EC and the host failing to see any of those events. This change configures EC_SYNC_IRQ as level triggered to allow the host to read events from the the EC as long as the line is asserted. BUG=b:118949877 Change-Id: Id3fcfa0445f83865d57975a7bbc179dca047ba4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2018-11-06chromeec: Disable battery remaining capacity workaroundDaisuke Nojiri
If remaining charge is more than x% of the full capacity, the remaining charge is raised to the full capacity before it's reported to the rest of the system. Some batteries don't update full capacity timely or don't update it at all. On such systems, compensation is required to guarantee the remaining charge will be equal to the full capacity eventually. On some systems, Rohm charger generates audio noise when the battery is fully charged and AC is plugged. A workaround is to do charge- discharge cycles between 93 and 100%. On such systems, compensation was also applied to mask this cycle from users. This used to be done in ACPI, thus, all software components except EC was able to see the compensated charge. This patch is part of the effort of moving the logic to EC. With this and the EC changes, EC can see what the rest of the system sees, thus, can control LEDs synchronously (to the display percentage). Another rationale of this move is EC can perform more granular and precise compensation than ACPI since it has more knowledge about the battery and the charger. CQ-DEPEND=CL:1312204 BUG=b:109954565,b:80270446,chromium:899120 BRANCH=none TEST=Verify charge LED changes to white (full) on Sona synchronously to the display percentage. TEST=Verify charge LED changes to blinking white (low) on Sona within 30 seconds synchronously to the display percentage. Change-Id: I0b51911b90dc2e7fcf5c730c54d9fda1fea76aa9 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/29441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-02ec/google/wilco: Add wake pin configurationDuncan Laurie
Add a way for the mainboard to provide a wake pin that the EC will use to wake the system. This defines a _PRW object. Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29408 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Unmute audio on initDuncan Laurie
The speakers start up muted, and the EC must be told by the BIOS to unmute it. This helps prevent popping noises on boot/resume. Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add ACPI SuperIO devicesDuncan Laurie
Add ACPI devices for the basic SuperIO functionality provided by the EC for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART. The specific defines to enable these devices should be declared by the mainboard before including this ASL, the same as the Chrome EC behavior. Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC event handlersDuncan Laurie
Add methods to handle ACPI EC events at runtime. Currently only some common events are handled like lid switch and battery info, and the event status is printed for debug on other events. Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI battery and AC objectsDuncan Laurie
Add the expected objects (_BST, _BIF, _BIX) for reading battery information and status from the embedded controller, and the expected objects for reporting AC power status. The battery was tested by booting with a battery attached and checking that it is present in /sys/class/power_supply/BAT0 and that the values are consistent and within expected ranges. The AC device was tested by checking the AC status in sysfs when AC is inserted or removed while the system is running. Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC infrastructureDuncan Laurie
Add the base ACPI support for the Wilco embedded controller, using ASL 2.0 syntax throughout. This includes the EC device and its resources, as well as the layout for the EC RAM and the functions needed to read and write to the EC RAM. The EC RAM address space is typically read/write, and so the ACPI EC device expects that a defined Field can be read and/or written. With this EC the read and write address spaces are different. For example, a read from address zero will return data that is unrelated to what a write to address zero expects. This makes using a typical OperationRegion to describe the EC RAM address space somewhat impracticle, since field definitions would overlap. Instead, methods are provided for reading and writing to an EC RAM offset, and the EC RAM layout is defined as a Package that describes offset+mask for read or write fields within the EC RAM. Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add a bootblock function for early initDuncan Laurie
Add a function for use in bootblock stage that performs early init of the EC, in particular setting it up for UART passthrough so a legacy serial port can be used by the host. This needs to be called by the mainboard that intends to use it in bootblock in order for the UART to be available in later stages. Some of the PNP style programming may look odd, but it is following the EC specification which is not entirely standard. This code has been tested on a board with this EC and it is functional. Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Save and restore PS/2 data for S3Duncan Laurie
Send a command to the EC on the way into S3 suspend state telling it to save the PS/2 data, and on resume send it a command for restoring the PS/2 data that was previously saved. Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29120 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add SMM handlersDuncan Laurie
Add EC handlers for specific SMM actions: - on entry to sleep state tell the EC to save state and to prepare for the host to enter sleep - on ACPI enable/disable send command to the EC - add a function to print SMI reasons when eSPI SMI is received These need to be called by the mainboard handlers which will be done when a board is added that uses this EC. Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29119 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Report BIOS progress to the ECDuncan Laurie
The EC expects to receive updates about the BIOS boot progress. This is used for the EC logging to track system boot completeness. If the EC is not informed about BIOS progress it will turn the system off 30 seconds after the boot starts. Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add devicetree chip infrastructureDuncan Laurie
Add a chip_operations structure for Wilco EC and hook it into the device tree so it can be initialized at boot. Reserve the device resources specified in Kconfig, which will also create the device IO windows if they have not been created in bootblock. If the IO windows already exist (becauase they were specified in the mainboard devicetree.cb) then this will find the existing entry instead. During device init stage prepare the keyboard for use, which is required for it to be functional in firmware and OS with this EC. Also send a command to the EC telling it to pass the power button through to the host for processing. Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add power related mailbox commandsDuncan Laurie
Add EC mailbox commands that are related to the power and state of the system. These commands include: - read the power status registers from the EC - read & clear the power status registers - helper function to read the current lid state - tell the EC why the host is about to power off - tell the EC that the host is about to enter a sleep state Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29116 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox commandsDuncan Laurie
Add basic supported mailbox commands for this embedded contrlller, and define some command functions to retrieve and print information about the EC. Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox helper functionsDuncan Laurie
Add helper functions that make it more convenient to send and receive the most common types of commands to the Wilco embedded controller. Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29114 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>