| Age | Commit message (Collapse) | Author |
|---|
|
This commit simply adds support for a Do Not Disturb key. HUTRR94 added
support for a new usage titled "System Do Not Disturb" which toggles a
system-wide Do Not Disturb setting.
BUG=b:342467600
TEST=Build and flash a board that generates a scancode for a Do Not
Disturb key. Verify that KEY_DO_NOT_DISTURB is generated in the Linux
kernel with patches[0] that add this new event code using `evtest`.
[0] - https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/commit/?id=22d6d060ac77955291deb43efc2f3f4f9632c6cb
Change-Id: I26e719bbde5106305282fe43dd15833a3e48e41e
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82997
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
|
|
Add support for an Accessibility key. HUTRR116 added support for a new
usage titled "System Accessibility Binding" which toggles a
system-wide bound accessibility UI or command.
BUG=b:333095388
TEST=Build and flash a board that contains an accessibility key. Verify
that KEY_ACCESSIBILITY is generated in the Linux kernel with patches[0]
that add this new event code using `evtest`.
```
Testing ... (interrupt to exit)
Event: time 1718924048.882841, -------------- SYN_REPORT ------------
Event: time 1718924054.062428, type 4 (EV_MSC), code 4 (MSC_SCAN), value a9
Event: time 1718924054.062428, type 1 (EV_KEY), code 590 (?), value 1
Event: time 1718924054.062428, -------------- SYN_REPORT ------------
Event: time 1718924054.195904, type 4 (EV_MSC), code 4 (MSC_SCAN), value a9
Event: time 1718924054.195904, type 1 (EV_KEY), code 590 (?), value 0
Event: time 1718924054.195904, -------------- SYN_REPORT ------------
```
[0] - https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/commit/?id=0c7dd00de018ff70b3452c424901816e26366a8a
Change-Id: Ifc639b37e89ec251f55859331ab5c2f4b2b45a7d
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82996
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
d0771e49e7 MKBP: Increase key matrix size
The original include/ec_cmd_api.h version in the EC repo is:
d0771e49e7 MKBP: Increase key matrix size
Change-Id: I4f3dfc3f145e50e6114894352cdc118ad5a9565b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82995
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Under Windows ACPI, GpioInt and _PRW must be mututally exclusive within
the scope of a device, otherwise a BSOD occurs with an ACPI_BIOS_ERROR.
To enforce this, only use _PRW when EC_ENABLE_SYNC_IRQ_GPIO is not set.
If both EC_ENABLE_WAKE_PIN and EC_ENABLE_SYNC_IRQ_GPIO are set, then
ensure that the GpioInt is flagged as ExclusiveAndWake (vs just
Exclusive) so that the CREC device is still able to wake the device
as needed.
TEST=Build/boot google/{nocturne,frostflow} to Win11 w/ sync_irq_gpio
and wake_pin both enabled.
Change-Id: Ia59cce2ee12bfc8d3ac0173a7a4ec88d7079a958
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82233
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9ed1a82fcd3fc29124ddc406592bd45dc84d4628
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
When support for the dictation key was added in commit f2782b8328d5
(acpigen_ps2_keybd: Add support for dictation key), I had failed to
include this portion of the change in that commit. The top row key of
`TK_DICTATE` needs to be converted to the ps2_action_key. This commit
simply adds that mapping so that it can be translated.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel using `evtest`.
Change-Id: I1be8c0a96931cca36e6bbbfa0be7d36c4cd93768
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82274
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the ChromiumOS EC indicates that the device has an assistant key,
we should also add it to the generated linux,keymap binding. This
commit simply does so by examining the keyboard capabilities reported by
the EC.
BUG=b:333088656
TEST=With a device that has an assistant key, flash AP FW and verify
that the key is mapped to `KEY_ASSISTANT` in the Linux kernel using
`evtest`.
Change-Id: I217220e89bce88e3045a4fc3b124954696276442
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81996
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Do not fill the ACPI table entry associated with the cros_ec_typec
driver once we switch to the UCSI kernel driver. Skip the ACPI entry if
EC implements the UCSI_PPM feature, and the CBI flag to enable UCSI is
set.
BUG=b:333078787
TEST=emerge-brox coreboot chromeos-bootimage
Cq-Depend: chromium:5416841
Change-Id: I67dff6445aa7ba3ba48a04d1df3541f880d09d0a
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
b3b35d6433 PPM: Rename ucsi_disabled to ucsi_enabled
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
BUG=b:333078787
TEST=cros build-packages --board brox \
chromeos-bootimage depthcharge coreboot
TEST=cros build-packages --board brya \
chromeos-bootimage depthcharge coreboot
BRANCH=none
Change-Id: I94b509cd6ad8f24bfc3b44ef02633d06320f1e22
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81965
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
9fdd96bfc6 keyboard: Add support for a "Dictation" key
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
Change-Id: I7ec965d07aa4cb1fe54916845780f342ea3debb9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81932
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of having things depend on EC_GOOGLE_CHROMEEC, just put an if/
endif block around the configs.
The 'source' line stays outside of the if block because the source
always happens, even if it's inside an if/endif block. Each of the
sub-Kconfigs here already has an if/endif block surrounding the
contents.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If88ba7d36ae04d879332037292c5cf9a3c8c3cab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Several older ChromeOS boards have issues with fan control on cold boot
and/or on S3 resume, so add functionality to allow those boards to
programmatically enable auto fan control.
TEST=build/boot google/link, verify fan ramps up/down accordingly with
CPU load.
Change-Id: I08a8562531f8af0c71230477d0221d536443f096
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Change-Id: Ie63499a4b432803a78af1c52d49e34cf1653ba17
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80589
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic060f3605cd18d4bf774573c21957f626f984e2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80069
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The ACPI spec defines keywords for the GpioInt and Interrupt resources
to specify whether a given pin is wake capable. Some boards are using
the ec sync interrupt pin to wake the system so the CREC _CRS needs to
be updated accordingly.
Provide a new macro that allows a board to specify whether its ec sync
pin is wake capable.
BUG=b:243700486
TEST=Dump ACPI and verify ExclusiveAndWake share type is set when
EC_SYNC_IRQ_WAKE_CAPABLE is defined
Change-Id: I483c801ff0fee4d3ce0a3b2fc220e0bd9356a612
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
The original include/ec_cmd_api.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
BUG=b:300525571
BRANCH=none
TEST=none
Change-Id: I3570e073a91621cb1d28a24aa35c1f4beedceaab
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79066
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds is_battery_present_and_above_critical_threshold to check the
battery is present and the battery level is above critical level.
BUG=b:296952944
TEST=Build rex and check is_battery_present_and_above_critical_threshold
returns the correct battery status.
Change-Id: Ib38be55bc42559bab4f12d5e8580ddc3e1a6acc1
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Librem 11's volume keys act as a PS/2 keyboard with only those two
keys. Reduce the minimum number of top-row keys to 2. Make the
"rest of keys" (alphanumerics, punctuation, etc.) optional.
Change-Id: Idf80b184ec816043138750ee0a869b23f1e6dcf2
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
With commit b7832de0260b042c25bf8f53abcb32e20a29ae9c ("x86: Add .data
section support for pre-memory stages"), the `ENV_HAS_DATA_SECTION'
flag and its derivatives can now be removed from the code.
Change-Id: Ic0afac76264a9bd4a9c93ca35c90bd84e9b747a2
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77291
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously the clear_ec_ap_idle() is implemented in
cr50_enable_update.c and be called in the file. Move it to
common code so that it can be called in cse_board_reset.c
TEST=emerge-brask coreboot
Change-Id: I2dbe41b01e70f7259f75d967e6df694a3e0fac23
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77631
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Tablet motion control is a function of the EC, and under Windows, the
TBMC device needs to be initialized after CREC, or driver init will
fail. The only way to ensure this happens is for TBMC to be a child
device under CREC.
TEST=build/boot Win11, Linux on google/eve, verify tablet mode drivers
loaded and orientation switching functional under both OSes.
Change-Id: I5e9eab9ae277b5a04dc2666960a727e5680bf6f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76792
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set the ACPI status (_STA) for the PD device enabled+visible, to allow
coolstar's Windows drivers for USB4/Thunderbolt to attach.
TEST=build/boot Win11 on google/drobit, install USB4/TB drivers, verify
USB4/TB ports are functional for PD and data at USB4 speeds.
Change-Id: I84a20cfaf7e077469f8361b3da3b031d9fd84134
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Set the ACPI status (_STA) for the EC ACPI to enabled+visible, to allow
coolstar's Windows drivers for the EC and keyboard backlight to attach.
TEST=build/boot Win11 on google/samus, install EC/kblight drivers,
verify keyboard backlight control functional.
Change-Id: I3e9578f1ef18b3bebb93a9ae2ae4e27bc38f648d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76790
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Split wait-loop for DP and HPD flags as below -
- google_chromeec_wait_for_hpd
- google_chromeec_wait_for_dp_mode_entry
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3e565d6134f6433930916071e94d56d92dc6cb06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76370
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Wait for DP/HPD flags only in AP initiated mode entry
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5137c346fbf1edabc60a53e0978e32f54885c330
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76369
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skip TCSS `wait_for_connection` for AP initiated mode entry.
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia04ff470961831237fe851f7ae3feaa5623d4b4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76368
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Skip TCSS `enter_dp_mode` command when there is no USB device detected
on the port.
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie6cd84cab3631596d4d7178dae2040e25c621f63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use ECRAM field MTNS to determine if motion sensor present, and set
TBMC device status accordingly.
TEST=build/boot google/{jinlon,drobit}, verify ACPI status for TMBC
correct for both devices with and without tablet mode.
Change-Id: Ic06ab6d721f0a3435e6dfd7b5e130f378096afec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update the chromeec driver to use the EC host command API. Large blocks
of repetitive code to set up EC calls are replaced with single function
calls to perform the same operation.
BUG=b:258126464
BRANCH=none
TEST=booted on rex
Change-Id: I0317405b1ed0c58568078133c17c8cfbc7c21d80
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73325
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The new util/chromeos/update_ec_headers.sh utility is used to update
ec_commands.h and introduce ec_cmd_api.h from the chrome EC repo.
ec_cmd_api.h is a new file from the chrome EC repo which defines the API
for communicating with the EC. It is a companion to the existing
ec_commands.h by defining functions corresponding to EC host command
opcodes and request/response struct definitions.
See $EC/docs/ec-host-command-api.md for details.
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
3e35858003 ec: Add another #line directive
The original include/ec_cmd_api.h version in the EC repo is:
59de61f2db zephyr: Add support for RNG devices
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I30f20e34d31b7e19cf03f65fefd58ae64eef1d41
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73324
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While Chromebook hardware originally would not have the
capacity to do suspend-to-disk (ACPI S4), the power management
code in EC should react to S4 request as if it was S5 request.
Change-Id: Ida9118919c8149d94f470847d0c4aad9c0b97d3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CB:16732, EC can provide default lid switch implementation(LID0
ACPI device). Up until that point, mainboard has been providing default
switch implementation. When EC provides lid switch implementation, the
lid switch state is read from EC either through MMAP or LPC interface.
Hence there is no need to keep mainboard's LIDS ACPI object in sync with
EC's lid switch state. Use only EC's lid switch state on boards using
EC's implementation. This paves the way to remove LIDS ACPI object on
those mainboards.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Trigger lid open/close
events and ensure that they are detected properly through
/proc/acpi/button/lid/LID0/state.
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: open
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: closed
Ensure that the system behaves as expected based on powerd
configuration. After signin, system suspends/resumes for lid close/open.
On signin screen, system shuts down/boots for lid close/open.
Change-Id: I013574d7c21761f167ad38aeed27a419677b8000
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Handle the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE.
Previously, the EC sent the host event EC_HOST_EVENT_MODE_CHANGE when
body detection changed between lap/desk mode. However, that event is a
wake event, which resulted in spurious AP wake events being triggered
when the EC detected lap/desk mode changes while the AP was suspended.
To resolve this, the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE was
added, which will not be a wake event. This CL adds handling for the new
event to acpi/ec.asl to switch DPTC tables when a change is detected.
BRANCH=none
BUG=b:261141172
TEST=bodydetectmode on|off, verify host event is received
Change-Id: Iabeb7891489a209f45504804355f1fa817082976
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73298
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update ec_commands.h from the EC repo at:
"8441cf4 Add host event: EC_HOST_EVENT_BODY_DETECT_CHANGE"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:261141172
BRANCH=none
TEST=built coreboot for skyrim
Change-Id: I9892c0c3518f63d357459861e8fa1b7f5f494e68
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Update ec_commands.h from the EC repo at:
"8b6f7de2a7 fan: update fan stalled value reporting"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:258110734
BRANCH=none
TEST=built coreboot for brya
Change-Id: I4ce15e1af40cc54a6cf2ebd6f5d5adf8953dee60
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This is a format-only change: Reformat ec_commands.h using clang-format
according to the EC repo's current formatting style.
The command is:
clang-format --style=file:$EC/.clang-format -i ec_commands.h
where $EC points to the chromeos EC repo.
The EC repo has recently adpoted the practice of formatting all files
through clang-format using its own style. So, run ec_commands.h through
the EC's clang-format so future updates don't get overwhelmed by
inconsequential style changes.
BUG=b:258110734
BRANCH=none
TEST=built coreboot for brya
Change-Id: Icbd6d00922dc5fd4c44ee109d54cea612e15db06
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Not all Chrome-EC devices have a keyboard or use Vivaldi for key
remapping, so demote the printk output when the EC doesn't support
it from ERROR to INFO. Adjust the printk text for clarity.
Change-Id: I14059f4e3e56ff891f302601d5acc1bb842cffc1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72474
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To make the code slightly easier to read, add a comment about the scope
to the #endif of the outer #ifdef block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic2bc83c77750cd8a509f4755fdfa4daaf082d754
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Not all ports have retimers. Add a property to denote that a particular
port has a retimer (instead of assuming that all ports have retimers).
BUG=b:263964979
TEST=Verified on guybrush; SSDT shows retimer-switch on port1 when
device tree is updated accordingly.
Change-Id: I754323236d2912777b63cede0fce2ccf7882cfea
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71663
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I449ec5b0bbf3f24d51688efef151d3018d2848b2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71524
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5c77b6d1e1dc1134f62dcb3e93df01dc9c2f386c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71520
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Not (a)` with `~a`.
Change-Id: I53993fb7b46b3614d18ee001323f17efacbf04c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `And (a, b)` with `a & b`.
Change-Id: Id8bbd1a477e6286bbcb5fa31afd1c7a860b1c7dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `And (a, b, c)` with `c = a & b`, respectively `c &= b` where
possible.
Change-Id: Ie558f9d0b597c56ca3b31498edb68de8877d3a2f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70850
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Or (a, b, c)` with `c = a | b`, respectively `c |= b` where
possible.
Change-Id: Icf194b248075f290de90fb4bc4e9a0cd9d76ec61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70846
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftLeft (a, b)` with `a << b`.
Change-Id: I812b1ed9dcf3a5749b39a9beb9f870258ad6a0de
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70842
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftRight (a, b, c)` with `c = a >> b`. One case was
simplified to just `a >> b`.
Change-Id: I889012b0a3067138e6f02d3fe8e97151effb5c2a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70840
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace `Store (a, b)` with `b = a`.
Change-Id: I2cdb1c9ae3a33bfc72767ff60d8948054d4e151a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust asserts to allow to store and compare (at S3 resume) hashes
without padding to maximum hash length / slot size.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: If6d46e0b58dbca86af56221b7ff2606ab2d1799a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
DTTS is Dynamic Thermal Table Switching Proposal. Add DPTC support for
host event lid-open/lid-close/Thermal Threshold.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I156a9d138ccac7f75cc0dd0d827f7a721fcbc782
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67793
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Clang warns about structs inside a union also needing the packed
attribute.
This files is copied from the chromeec project, so it adds comment next
to the coreboot specific changes as a reference.
TEST: google/vilboz remains the same with BUILD_TIMELESS=1 and gcc.
Change-Id: I8b5233618081db86caedcb2d14870974e109ed9b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie5355e05982b372ef69515cfa081e2afbc7b09fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This removes the dev_index argument from the google_chromeec_reboot
API. It's always set to 0, so don't bother passing it.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: Iadc3d7c6c1e048e4b1ab8f8cec3cb8eb8db38e6a
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69373
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't need to check the lower level error code to determine if an EC
call succeeded. Simply check the return value of the call.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: Iaf0795b0c1a2df0d3f44e6098ad02b82e33c5710
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69372
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
google_chromeec_get_uptime_info() doesn't need to return an error code
from the lower level calls for the caller to interpret. It is more
appropriate to return a success/failure boolean.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I3e27b8b4eed9d23e6330eda863e43ca78bb174a3
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69371
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The EC_CMD_USB_PD_PORTS host command returns a
struct ec_response_usb_pd_ports, not a
struct ec_response_charge_port_count.
Luckily, both structs have the same memory layout, so this is simply a
name change.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I0d7710ca8a45f0ea3939f58bbba6bab31ff41919
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69370
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify the implementation of setting the keyboard backlight PWM
value. Host command stubs typcially don't need to examine the host
command's return value as stored in cmd_code because that level of
detail is not very interesting. Higher value error codes are returned in
actual result structures.
This host command can return EC_RES_ERROR for out of range PWM values
which is already a generic error and unlikely to happen since we already
limit the range to 0..100 here. Finally, none of the callers in coreboot
check the return value.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: If17bc4e31baba02ba2f7ae8e7a5cbec7f97688c5
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69369
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT command does not return data, so
don't specify a result buffer.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I5b9a0d228e187a9337498246a3b9ed8db07b95c7
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
Add an ACPI method to handle EC_HOST_EVENT_PANIC (bit 24) events.
EC panic is not covered by the standard (0-F) ACPI notify values.
Arbitrarily choosing B0 notify, which is in the 84-BF device specific
ACPI notify range.
This will be a no-op until the kernel driver is also updated to handle
this event.
BUG=b:258195448
BRANCH=None
TEST=Observe event with modified cros_ec_lpc driver
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: Iafa642c1c50f9a0083a8e618e1eabec9a7ce39b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69391
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DTTS is Dynamic Thermal Table Switching Proposal.
DTTS needs one bit to save the body detection result from EC.
Define mode change STTB bit for Desktop (1) and laptop (0).
This bit is Switch thermal table by body detection status.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I37b3a0d8f6546361c8d5501e98e3e1b0d814fce3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68077
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 672bd9bee5c0045694ef20fe3e2f7a003bef0edd.
Reason for revert: Gmeet resolution dropped. When system starts
Gmeet video call, it uses the hardware accelerated encoder as per
the expectation. But, as soon as another system connects to the call,
the immediate fallback observed from hardware to software encoder.
Due to this, Gmeet resolution dropped from 720p to 180p.
Currently, this issue observed on AlderLake-N SoC based fanless
platforms. This issue is not seen on fan based systems.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alderlake-N systems. With this revert
Gmeet resolution drop not observed.
Change-Id: Idaeaeaed47be44166a7cba9a0a1fac50d2688e50
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Several EC host commands check for support of a given feature or msg
version, and a non-zero response does not necessarily indicate an actual
error. Since the caller is (should be) handling the non-zero response to
the host command, demote the EC printk from ERR to SPEW to clean up the
console log and prevent non-errors from causing false failures in
firmware tests.
BUG=b:238961053
Change-Id: Ib7afc0b7e5b571acb56252f7adb518a6b2716b62
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68259
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In order to fix the USB port of type-C dongle has no function after
reboot/shutdown, modify ufp which is in google_chromeec_usb_pd_get_info
from the bit1 of type-c role (PD_CTRL_RESP_ROLE_DATA).
BUG=b:239138412
TEST=Built coreboot image and verified that using this patch can detect
usb drive after reboot.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I73a4a6ec37129388783599125f067068d155d93f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67168
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add multiple fan support for dptf policies
BUG=b:235254828
BRANCH=None
TEST=Built and tested on Redrix system for two fans
Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Compile-time support of DPTC is controlled by
EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes
EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
Each variant's run-time support of DPTC continues to be controlled by
the variant's overridetree.cb "dptc_enable" value.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
PNOT() should be called when the battery status changes, to give the SOC
an opportunity to handle it. This is in preparation for the low/no
battery boot changes.
This CL also updates the PNOT() comments to better match the name of the
function and why it's called.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Change-Id: I8b74313d242fd4959315a67579eb6c5f49a31a76
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66993
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The agah EC code will monitor adapter current to choose corresponding
DPTF oem variable table. When it changes, this event will send to the
ACPI FW through host event and then pass onto the DPTF kernel driver.
This patch adds support for that feature.
BUG=b:238921409
TEST=add Printf() calls to the ACPI,
and check these Printf() will show up in the kernel log
when EC send oem variable table change notify.
Change-Id: I1dbbfd9b3d65b56d77050c9ba9957e54530c3a0e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66574
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DPTF power participant device needs to be notified when power
source changes so it can re-evaluate power source and power source
change count, this can be later used by DPTF along with methods
provided by EC.
Corresponding changes in EC are https://crrev.com/c/3545778 and
https://crrev.com/c/3547317
BUG=b:205928013
TEST=Build, boot brya0 and dump DSDT to check change
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I07f58b928a0dba92bec3817177142c586e5014b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The flag EC_BATT_FLAG_CUT_OFF was added with the CL:
3704470: battery: Set battery cutoff flag
https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3704470
This flag is set in the ACPI memory mapped area when the command
`ectool batterycutoff` is issued so ACPI code can respond
appriopriately. This CL adds the flags to coreboot ACPI.
BRANCH=none
BUG=b:217911928
TEST=Boot nipperkin with low & no battery
TEST=Boot skyrim with low & no battery
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I4e63ff4fc2d6b0ecf767a6bffd81f823c74c15bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66803
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there are many identifiers whose name contain "__unused" in
headers of musl libc, introducing a macro which expands "__unused" to
the source of a util may have disastrous effect during its compiling
under a musl-based platform.
However, it is hard to detect musl at build time as musl is notorious
for having explicitly been refusing to add a macro like "__MUSL__" to
announce its own presence.
Using __always_unused and __maybe_unused for everything may be a good
idea. This is how it works in the Linux kernel, so that would at least
make us match some other standard rather than doing our own thing
(especially since the other compiler.h shorthand macros are also
inspired by Linux).
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I547ae3371d7568f5aed732ceefe0130a339716a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There is a new field in EC EMEM for arbitrary GPU data to be passed
from EC to ACPI FW; this patch adds support for it.
Also the current host event for _Q0C (EC_HOST_EVENT_USB_CHARGER) is
unused, and is being repurposed in the next CL, so this patch drops
the handler.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iff6f935a5bdc8c47277eaa6bcbedd5fc5ed311a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65485
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This change copies ec_commands.h directly from the ChromiumOS EC repo,
with the exception of changing the copyright header to SDPX format.
Update to commit SHA1 2cbf6fbf (ec_commands: Drop VBNV read/write
support).
BUG=b:178689388
TEST=none
BRANCH=none
Change-Id: I74fa8b1171ca109dee163a7657659cdac1687450
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65469
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CB:65012, google_chromeec_vbnv_context() is no longer used. Remove
it from the codebase.
BUG=b:178689388
TEST=./util/abuild/abuild -t GOOGLE_STOUT -a -x
Change-Id: I717f600f0f73c3ca932b6a442a9d5b90c35c8f3b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
On some systems, the Chrome EC controls both the USB Type-C mux as well
as the retimer. Introduce a boolean property "mode-switch" to denote
switches which act as a mode-switch.
BUG=b:235834631
TEST=None
BRANCH=None
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: If209a8529ff7ec424f23fd96875ac95a1fe6267d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add fan speed rpm control for DPTF based Active2 policy as per
document #626708, by utilizing existing FAN0 variable from
src/ec/google/chromeec/acpi/emem.asl#18.
There is no corresponding EC change required for this policy
support because EC fan code already exporting this rpm value
using EC_MEMMAP_FAN for FAN0.
BUG=b:224457192
BRANCH=None
TEST=Built and booted on ADL-P based Brya system and
verify the fan speed in rpm under sysfs path
cat /sys/bus/acpi/devices/INTC1048\:00/fan_speed_rpm.
Change-Id: Ibb1646b1fb1659fd853ece97d97bb9dee2a3f57e
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: I2e0c5961fcc90c97666f49837a71f6c0bdc429b3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: Ie6238ead464d79b3576846f3b5b92b658972eec8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: Iea86e77df6c76756ed336f57a906ac0757aef1cf
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `Divide (a, b, , c)` with `c = a / b`.
Change-Id: I26117087c09109cfc480cbe01d3761a02a12c61b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I4d79080ecfe457766983b20a0217ccadcd188fcf
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: I65225a890f9085574a2295e6ccd2cdc3e84f71e0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: I72875f68e143f9384c91588cd453d2987fda526d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some platforms have retimers which can be configured via the EC. Add a
handle to these retimer devices to the Type C connector device, using
devicetree references.
BUG=b:208883648
TEST=Verify disassembled SSDT on brya.
BRANCH=None
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: Ic0480b08c6d6a7562cca57192e49b8ea2a33b51e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce an EC Mux ACPI device, which will control retimer and discrete
(off-AP) mux configuration.
BUG=b:208883648
TEST=None
BRANCH=None
Change-Id: Ia2022810292783583ee5f09ce29a63b96686dbb8
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
If set OEM string as "", it shows "Not Specified" with dmidecode.
Use default string if it is empty.
BUG=b:230039300
TEST=set OEM string "" and show google with dmidecode -t 2.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I097e1be696ae974aadc47feb8d0c1dae672a5c82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
Change-Id: Ief40e790fdee336fd6c786e18cd01c41fa658c2c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Change-Id: I910998a5555319cf9840493a31df4934054e08ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In most boards, it doesn't write OEM_NAME in CBI to override the
manufacturer name in the SMBIOS table. It' better use the "BIOS_INFO" than "BIOS_ERR"
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I52eb1e6926eaac30b1dbee13ab750ef15b466d89
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently, many Linux drivers use DMI quirks to identify ChromeOS
devices and handle them accordingly: namely they look for the SMBIOS
system manufactuer to be "GOOGLE" or "Google", and the bios-vendor to be
coreboot. Historically this was consistently the case, but recent model
ChromeOS devices allow the OEM to set the mainboard manufacturer, which
is also the default system manufacturer. This breaks many DMI quirks,
notably ones used by SOF (sound open firmware) for audio.
To fix this, set the system manufactuer for ChromeOS devices to "Google"
for devices selecting CONFIG_EC_GOOGLE_CHROMEEC_SKUID, leaving the OEM
customization in place for the mainboard manufacturer. Since boards
selecting CONFIG_EC_GOOGLE_CHROMEEC_SKUID are the only ones overriding
the default mainboard manufacturer, they are the only ones which need
this correction.
Test: build/boot google/bloog with Linux 5.16, verify SOF drivers
correctly detect device as a Chromebook and load the appropriate
audio firmware.
Change-Id: I9de17fa12689ab4e627b995818aa3d2653102b04
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62796
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang complains about this.
Change-Id: If7af9d5a81c1c381490c9634e3da68ff7f5edda8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support of MENU key (aka hamburger) for Chromebooks with Vivaldi
keyboard
BUG=b:215038215
TEST=manually tested on Anahera device: pressing T13 key opens menu
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I07873dd9385c743a6512408688ec44a5e97219f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61835
Reviewed-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Lance Zhao
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
