| Age | Commit message (Collapse) | Author |
|---|
|
Commit d25277666829 ("tree: Replace And(a,b) with ASL 2.0 syntax")
replaced two instances of `And(var, mask) == 0` with `var & mask == 0`.
This expression needs parentheses - `(var & mask) == 0`.
Without parentheses, it is always false, since the masks are nonzero
(`var & (mask == 0)`; `var & 0`; `0`).
This caused brightness changes on Intel GMA to take longer than
normal since the status was never checked. The brightness would
change immediately, but another brightness change could not occur until
the first change timed out.
This was most noticeable in KDE, which waits for the brightness change
to complete before accepting another brightness up/down keypress.
Tapping brightness up/down repeatedly would take much longer to reach
max/min brightness due to many presses being ignored.
It is noticeable in GNOME as well but less obvious. Tapping brightness
up/down repeatedly would handle all keypresses, but the display's
actual brightness would lag behind and skip some intermediate steps.
I tested both Librem 13v2 and Librem 14, as far as I know this would
apply to all systems configuring brightness with Intel GMA.
Test: Verify brightness keys respond quickly again on Librem 13v2 / 14.
Change-Id: I57895e8c654c83368b452d7adfe1856c0a0341fb
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80260
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Added Lunar Lake device IDs the device specific functions
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
Change-Id: Id31d567287b9921d60909b1eb617c7cfaf6672c9
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
1. Adjust VFP and CLK to meet 60 +- 0.01 Hz
2. Fine tune init code for panel internal circuit
Fixes: 520137f("drivers/mipi: Add support for IVO_T109NW41 panel")
BUG=b:320892589
TEST=boot ciri with IVO_T109NW41 panel and see firmware screen
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I4d7c7bd4d79301fbb6d555117d190c358bceafcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80086
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cf3d2e2cd1b6ebe4e941ad64f27698379fef696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80080
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id47a5ef3c53f767d1e03c788e0022d05b21f5c28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80079
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I358b878b97adfd9be156a5dd4a9cbaf9e81bca1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2f299920eb7c6d6f8888cfe5e223ae03093a1d88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80077
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Add and use inline method to identify the root device.
Change-Id: I394c8668245bcfea6414b8ca5f14ef8135897e59
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80169
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
1. Correct bank1 to bank0
2. Adjust CLK duty
3. Fix abnormal power off setting
4. Change VDDE power off frame from VGL to VGH
Fixes: 0d50536("drivers/mipi: Add support for BOE_NV110WUM_L60 panel")
BUG=b:319398058
TEST=boot Ciri with BOE_NV110WUM_L60 and see firmware screen
Change-Id: I2f068ba0ec9dede3e3361b55c38a8eca8793905a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use call_smm instead of open-coding the same in inline assembly
functionality in init_store. The local ebx variable is dropped, since
call_smm takes a pointer to the argument instead of an integer, and the
local eax variable is renamed to res to make the code a bit clearer,
since the EAX register is used for both passing the command and
subcommand to the APMC SMI handler and to get the return value from the
handler.
TEST=SMMSTORE V2 still works with the EDK2 payload on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib14de0d120ae5c7db3bb7a529837ababe653e1a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This commit adds support for showing different logos on the ChromeOS
firmware splash screen based on the device model (between
Chromebook-Plus and regular ChromeOS devices like Chromebook and
Chromebox). This allows OEMs to customize the branding on their
devices.
This patch also introduces three new Kconfigs:
- CHROMEOS_FW_SPLASH_SCREEN
- CHROMEOS_LOGO_PATH
- CHROMEBOOK_PLUS_LOGO_PATH
which allow users to enable the fw splash screen feature in the
vendorcode. Previously, we were using the BMP_LOGO Kconfig in
drivers/intel/fsp2_0, but we didn't want the top level Kconfigs to be
located inside the architecture specific files.
BUG=b:317880956
BRANCH=None
TEST=emerge-rex coreboot chromeos-bootimage
verify that FW splash screen appears
Change-Id: I56613d1e7e81e25b31ad034edae0f716c94c4960
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79775
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add IVO_T109NW41 serializable data to CBFS.
Datasheet: T109NW41 R0 Tentative Product Specification.docx
BUG=b:319025360
TEST=build and check the CBFS include the panel
BRANCH=None
Change-Id: Id740e3a21f72bbcd6e5c2b56b31ac90f4990d475
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79844
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add BOE_NV110WUM_L60 serializable data to CBFS.
Datasheet: B5NV110WUM-L60 V5.0Product SpecificationRev.P0
BUG=b:308968270
TEST=build and check the CBFS include the panel
BRANCH=None
Change-Id: I830a41555131cfc51ef6976ac5428bf9bc03c097
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78956
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DDR RFIM _DSM method function 3 need to return:
- 0: Enable DDR RFIM feature.
- 1: Disable DDR RFIM feature.
BUG=b:302084312
TEST=Build, dump SSDT to check _DSM function 3 return value
Change-Id: I642c56a9c3160cdb41b254dc75e126cacf905b14
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3bb71da8ea47f7365ae3895f5477f2a765256e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The FSP boot mode showing in serial log is a magic number.
In order to let user understand its meaning directly, add
the strings to describe the modes.
TEST=build, boot the device and check the logs:
without this change, the log is like:
[SPEW ] bootmode is set to: 2
with this change:
[SPEW ] bootmode is set to: 2 (boot assuming no config change)
Change-Id: I49a409edcde7f6ccb95eafb0b250f86329817cba
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch implements debug logging to aid debugging and
analysis of Firmware Splash Screen feature behavior.
BUG=b:284799726
BRANCH=firmware-rex-15709.B
TEST=Able to build and boot google/screebo and check the
FW splash screen state.
[DEBUG] Firmware Splash Screen : Enabled
Change-Id: I1ec7badf620e8dbe3d48674d93d640161de6a830
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
datasheet: https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20221129/DS-00562-GD25LQ255E-Rev1.1.pdf
BUG=b:311336475
BRANCH=firmware-rex-15709.B
TEST=Build AP-firmware and test on karis, system can boot to OS.
Change-Id: Id952ba3a4a45a51571d3735cf6b5764cece2c5e4
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79087
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
datasheet: IS25WP256D Rev A13 (2023-08-03)
tested:
boot SiFive Hifive Unmatched board
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I655776258cbcf464becf38cbb5045cda5bca711c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Configure UART baud rate, Line Control register as 8n1 with FIFO
enable and enable UART TX and RX.
Change-Id: I090344a20430dc370a0b93ff7fbbae54111fae24
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I926ec4c1c00339209ef656995031026935e52558
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77637
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=build karis firmware pass
Change-Id: I67b4ca4c8fde795d4206eaa0b9ea9d9bfc768ac6
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Proposed in the comment of commit 29030d0f3dad
("drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume"),
during sanitize_cmos(), only reset CMOS range covered by checksum and
the checksum itself from the file cmos.default in CBFS, in order to
prevent other runtime data in CMOS (e.g. the DRAM training data on
GM45 platforms for s3 resume) being erased.
Tested: cherry-pick this commit before commit 44a48ce7a46c ("Kconfig:
Bring HEAP_SIZE to a common, large value"), which is already
before my commit 29030d0f3dad , Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can resume from s3 again,
indicating that DRAM training data are no longer erased.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Co-authored-by: Jonathon Hall <jonathon.hall@puri.sm>
Change-Id: I872bf5f41422bc3424cd8631e932aaae2ae82f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
init() was always followed by open() and after successful initialization
we only need send-receive function which is now returned by tis_probe()
on success, thus further reducing number of functions to export from
drivers.
This also removes check for opening TIS twice that seems to have no
value.
Change-Id: I52ad8d69d50d449f031c36b15bf70ef07986946c
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76954
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The coreboot_version global variable just gets filled with the
COREBOOT_VERSION macro so there is no reason to use a runtime strconcat.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3a2be7293d07ac591855ebd784bba350cdffa70f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78945
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4113dc3208fe15305d1132136dd33417dd086bfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I708e8a3b503eb3a7fdf6063803d666529096f651
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I30e4b02a9ca6a15c9bc4edcf4143ffa13a21a732
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78799
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Thanks to x86 CBFS cache support, we can leverage cbfs_map() function
to load the VBT binary regardless of if it is compressed or not.
Change-Id: I1e37e718a71bd85b0d7dee1efc4c0391798f16f7
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
No driver available or needed under Windows, so hide from OS.
TEST=build/boot Win11 on google/kahlee (liara), verify ADAU7002
device no longer listed as unknown under Device Manager.
Boot Linux and verify audio still functional.
Change-Id: If6d250a123825a69441b5c4d3cde35d5a68f568d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78510
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce Kconfig choice to pick between lzma, lz4 and no compression
at all of the VBT binary.
If VBT is needed in romstage, it can be used to set VBT lz4
compression as an alternative to enabling lzma compression support.
Indeed, the extra lzma code needed to de-compress VBT undermines the
compression size reduction between lzma and lz4.
BUG=b:279173035
TEST=Verified that vbt.bin is lz4 compressed with
VBT_CBFS_COMPRESSION_LZ4 and not compressed at all with
VBT_CBFS_COMPRESSION_NONE
Change-Id: I1df6a96c2ec122f0ef8ee6a1e96ffbd621b14941
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Checking to see if a the location of a static variable is NULL isn't
super useful. If the check ever fails, there are much larger issues.
Found-by: Coverity Scan #1452607
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6d3e012542287511f61807075c998efd6d10441e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78614
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The macro ENV_HAS_CBMEM achieves the same as this inline function.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6d65ca51c863abe2106f794398ddd7d7d9ac4b5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77166
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Create an event handler for the PEWAKE# GPIO and notify the device
driver to wake up the device.
BUG=b:301150499
TEST=Compiled and tested on google/redrix:
1. Enable runtime suspend for linux mtk_t7xx driver
2. Wait for device to enter suspended state
3. Modem should be able to wake up driver, e.g. on SIM card insert/eject
The interrupts should show up under /proc/interrupts as ACPI:Event
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Change-Id: I32257689da85ea71f9de781093b3ede0cfe70a0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78297
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After commit e12b313844da ("drivers/pc80/rtc/option.c: Allow CMOS
defaults to extend to bank 1"), Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can no longer resume from s3 (detected via
bisect).
Further inspection shows that DRAM training result of GM45 is stored
in CMOS above 128 bytes in raminit_read_write_training.c, for s3 resume
to restore, but it will be erased by sanitize_cmos(), which now clears
both bank 0 and bank 1, leaving only "untrained" result restored, so s3
resume will fail.
However, resetting CMOS seems unnecessary during s3 resume. Now,
cmos_need_reset will be negated when acpi_is_wakeup_s3() returns true.
Tested: Thinkpad X200 with CONFIG(STATIC_OPTION_TABLE) can resume from
s3 again with these changes.
Change-Id: I533e83f3b95f327b0e24f4d750f8812325b7770b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78288
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Bayhub BH720 eMMC bridge is a fixed internal device, and needs to
me marked as non-removable in order for Windows to properly recognize/
utilize the device. Add the necessary ACPI to be generated at runtime.
TEST=build/boot/install Win11 on google/kahlee (liara)
Change-Id: I0815abf1d2dc5cfe785dc04670ab91f2a6a1af23
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Support embedding a second FSP-M/FSP-S binary for an SoC that can
select one at runtime.
Comet Lake v1 and v2 are different steppings of the same SKUs, but they
require different FSP binaries. Supporting both in a single build
requires embedding both FSPs and selecting one at runtime based on the
CPUID. This is desirable for a product that may have different CPU
steppings but is not otherwise differentiated enough for a separate
firmware build.
An SoC can select PLATFORM_USES_SECOND_FSP to indicate that two FSP-M/
FSP-S binaries are required. Implement soc_select_fsp_m_cbfs() and
soc_select_fsp_s_cbfs() to choose one based on platform-specific
criteria. For Comet Lake, the first FSP is CML v1 and the second is
CML v2, but in principle a platform could define any meaning for the
first and second FSP.
FSP-T is not affected, only one FSP-T can be embedded if FSP_CAR is
used.
Only one set of FSP headers is used, which is sufficient for Comet Lake
v1/v2; their headers are equivalent.
ADD_FSP_BINARIES, FSP_USE_REPO, and FSP_FULL_FD are supported for both
sets of FSP-S/FSP-M but cannot be configured separately, both use the
same configuration.
Change-Id: Ied4c6c49a6bdf278238272edd47a2006258be8e5
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78344
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This consolidates the bp, tb, cmp, srp0 and srp1 variables under the new
spi_flash_bpbits struct to allow treating them as one unit in the
refactoring to follow.
Change-Id: I2a1a77fb73047df733498c0fa8b8de1153c3b09e
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42113
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a new coreboot table entry named
"has_external_display" to understand if external display is attached.
This information is useful to prevent graceful shutdown by payload
when the LID is closed but an external display is present.
This piece of the information will be gathered by coreboot and passed
into the payload using this new entry aka external_display because
payload (i.e., deptcharge) doesn't have any other way to determine
if external display is available.
BUG=b:299137940
TEST=Able to build and boot google/rex.
w/o this patch:
LID closed and external display attached (HDMI) in developer mode
(GBB 0x39):
> System is powered off by depthcharge
w/ this patch:
LID closed and external display attached (HDMI) in developer mode
(GBB 0x39):
> Booted to OS and device is alive/usable
Change-Id: I0fa7eee4c5a50371a7a66c6ca1ac2c7d046d010b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77796
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit updates the port select bit definitions for the
TRANS_DDI_FUNC_CTL registers in the Intel GMA driver to accommodate
the changes introduced since TGL SoC.
Specifically, the following changes were made:
- Updated the DDI select bit definitions from 3-bits (bit 28-30) to
4-bits (bit 27-30).
- Introduces `INTEL_GMA_VERSION_2` config to accommodate the port and
pipe related differences between previous generation GMA register
(TRANS_DDI_FUNC_CTL) to the current generation GMA register.
This commit backports the change from the following upstream patch:
https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3-
lucas.demarchi@intel.com
BUG=b:299137940
TEST=Able to build and boot google/rex.
Change-Id: I815ffa90c2e235afd70baa7e3837e1f9af89b1b0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Separate these so a mainboard can describe a PS/2 keyboard without a
PS/2 mouse or vice-versa.
Librem 11 has a PS/2 keyboard for the volume keys, but does not have a
PS/2 mouse, and the presence of a mouse device can cause the cursor to
appear on the desktop incorrectly.
ps2_controller.asl remains since many boards include it, it now just
includes the two new files.
Change-Id: I13a4c2caf8dc9e5004b775dc0a9ac2488e39f184
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78096
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional failure mode reporting to the TPM driver to provide
additional visibility into what failures are occurring.
BUG=b:296439237
TEST=Verify code paths on Skyrim, ensure behavior is unchanged.
BRANCH=None
Change-Id: I77a653201acf1bddc1ed1e2af701c8d3dd4f0606
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77491
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
Convert TPM functions to return TPM error codes(referred to as
tpm_result_t) values to match the TCG standard.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: Ifdf9ff6c2a1f9b938dbb04d245799391115eb6b1
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77666
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert hex print values to use the %#x qualifier to print 0x{value}.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: I0d1ac4b920530635fb758c5165a6a99c11b414c8
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables correct identification of boards using rt5650 codec for either
speaker or headset output (or both) by SOF Windows drivers.
Change-Id: Ied9717955fcfca33bd63a34f3f6961deb045239c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables correct identification of boards using rt1019 speaker amplifier
by SOF Windows drivers.
TEST=tested with rest of patch train
Change-Id: I550dc8614e6e21d6d8715c12b7a4af35117497b5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Allows device to be hidden from OS (Windows) via devicetree 'hidden'
keyword.
TEST=tested with rest of patch train
Change-Id: I81482bd19e24627cab80deed2b9057f45b6ac0a0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78037
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make naming convention consistent across all functions return values.
BUG=b:296439237
TEST=Boot to OS on Skyrim
BRANCH=None
Change-Id: If86805b39048800276ab90b7687644ec2a0d4bee
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77536
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
tis_init calls into tis_probe and returns an error or success, simplify
the call stack by removing the current tis_init implementation and
renaming tis_probe to tis_init.
BUG=None
TEST=builds
Change-Id: I8e58eda66a44abf5858123cf9bcf620626f1b880
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Update an invalid error message printed when the timer expires.
BUG=None
TEST=None
BRANCH=None
Change-Id: If6d35290e9cb8281cd33892dc052f49277474a59
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add some noop device_operations for devices below chip drivers/pc80/tpm
in the case CONFIG_TPM is unset. This avoids the warning "... missing
read_resources" when probing all devices for resources.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ibc37642a8b5f37b95c648141e03025a04ffa36bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77386
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
x86 pre-memory stages do not support the `.data` section and as a
result developers are required to include runtime initialization code
instead of relying on C global variable definition.
To illustrate the impact of this lack of `.data` section support, here
are two limitations I personally ran into:
1. The inclusion of libgfxinit in romstage for Raptor Lake has
required some changes in libgfxinit to ensure data is initialized at
runtime. In addition, we had to manually map some `.data` symbols in
the `_bss` region.
2. CBFS cache is currently not supported in pre-memory stages and
enabling it would require to add an initialization function and
find a generic spot to call it.
Other platforms do not have that limitation. Hence, resolving it would
help to align code and reduce compilation based restriction (cf. the
use of `ENV_HAS_DATA_SECTION` compilation flag in various places of
coreboot code).
We identified three cases to consider:
1. eXecute-In-Place pre-memory stages
- code is in SPINOR
- data is also stored in SPINOR but must be linked in Cache-As-RAM
and copied there at runtime
2. `bootblock` stage is a bit different as it uses Cache-As-Ram but
the memory mapping and its entry code different
3. pre-memory stages loaded in and executed from
Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`).
eXecute-In-Place pre-memory stages (#1) require the creation of a new
ELF segment as the code segment Virtual Memory Address and Load Memory
Address are identical but the data needs to be linked in
cache-As-RAM (VMA) but to be stored right after the code (LMA).
Here is the output `readelf --segments` on a `romstage.debug` ELF
binary.
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20
LOAD 0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW 0x4
Section to Segment mapping:
Segment Sections...
00 .text
01 .data
Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they
are totally different for the Segment 1 holding the `.data`
section. Since we need the data section `VirtAddr` to be in the
Cache-As-Ram and its `PhysAddr` right after the `.text` section, the
use of a new segment is mandatory.
`bootblock` (#2) also uses this new segment to store the data right
after the code and load it to Cache-As-RAM at runtime. However, the
code involved is different.
Not eXecute-In-Place pre-memory stages (#3) do not really need any
special work other than enabling a data section as the code and data
VMA / LMA translation vector is the same.
TEST=#1 and #2 verified on rex and qemu 32 and 64 bits:
- The `bootblock.debug`, `romstage.debug` and
`verstage.debug` all have data stored at the end of the `.text`
section and code to copy the data content to the Cache-As-RAM.
- The CBFS stages included in the final image has not improperly
relocated any of the `.data` section symbol.
- Test purposes global data symbols we added in bootblock,
romstage and verstage are properly accessible at runtime
#3: for "Intel Apollolake DDR3 RVP1" board, we verified that the
generated romstage ELF includes a .data section similarly to a
regular memory enabled stage.
Change-Id: I030407fcc72776e59def476daa5b86ad0495debe
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
_STR should return Unicode string. From ACPI spec:
6.1.10 _STR (String)
The _STR object evaluates to an Unicode string that describes the
device or thermal zone.
BUG=NA
TEST=Check the changed _STR in SSDT to see if Unicode() macro is used
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1f4b55a268c1dadbae456afe5821ae161b8e15a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77695
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This adds DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC to provide
the option to load pre-production or production signed IPU FW from IPU
kernel driver.
BUG=None
TEST=Build rex and brya to check if the build passes without an
error.
Change-Id: Ib507bceb6fd85d8ed764df82db400526a10e4d6e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77854
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The sta_himax83102 panel sometimes shows abnormally flickering
horizontal lines. The front gate output will precharge the X point of
the next pole circuit before TP term starts, and wait until the end of
the TP term to resume the CLK. For this reason, the X point must be
maintained during the TP term. In abnormal case, we measured a slight
leakage at point X. This is because during the TP term, the GPW does not
fully pull the VGL low, causing the TFT to not be closed tightly.
To fix this, we completely pull GPW to VGL before entering the TP term.
This will ensure that the TFT is closed tightly and prevent the abnormal
display.
BUG=b:299249186
BRANCH=corsola
TEST=FW Screen display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I5dddaaa38917a65990c1474b657db5eb551940b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77692
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I42e995952a72a23a5f3aeadf428ad13f25546854
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Also move the semicolon on next line.
Change-Id: I68412407ec8c8f99c15f39b0ec08d4fb33eb1b3f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic52f01d1d5d86334e0fd639b968b5eed43a35f1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77633
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Parentheses are not required.
Change-Id: Iad1f766a3eb569af39030e43365e8a0a609f5944
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77706
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I6ff11df45ddc396391efd651f9938e04646dc0d3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77707
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds support for Intel WIFI-7 series PCIe based WLAN module.
Change-Id: Ia31fdb87e15b50471dc7664e42b1e2625ce1ac58
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Convert camel case macros to uppercase and underscore separated macros,
such as:
PCI_DID_CyP_6SERIES_WIFI -> PCI_DID_CP_6SERIES_WIFI
PCI_DID_TyP_6SERIES_WIFI -> PCI_DID_TP_6SERIES_WIFI
This makes the macros more consistent with the rest of the code and
easier to read.
Change-Id: I9c739aab93dc0d043a3c9d9ce799087952c1e20b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77644
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch refactors the existing MRC cache storing logic, which was
spread between the ROM and RAM stages, into a single early MRC cache
store stage. The only exception is when SoC user selects
FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after
FSP-S).
It reverts all the boot-state logic previously used to locate and store
MRC cache from NVS HOB into NVS because majority of the platform can
potentially use the early MRC cache store with improved memory caching
at the pre-RAM phase (with the ramtop implementation).
The only exception is the Xeon SP platform, which currently locates
the MRC cache post in FSP-S (at ramstage). Therefore, this patch
provides an API to the FSP 2.x silicon init code to perform late
storing of the MRC cache.
In majority cases the updated logic, the romstage (post FSP-M) will
attempt to save the MRC cache. Platform that selects
FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post
FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is
enabled, the MRC cache will either be written directly to NVRAM at the
romstage or stashed into CBMEM for a late NVRAM write at ramstage.
Below table captures the change in the boot state w/ and w/o this
patch for storing the MRC cache. Overall the goal is to ensure the
platform behavior is remain unchanged before and after this patch.
w/o this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV |
| DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | BS_PRE | BS_DEV | BS_DEV |
| w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
w/ this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | Post FSP-S | BS_DEV | BS_DEV |
| DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | Post FSP-M | BS_DEV | BS_DEV |
| w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
BUG=b:296704537
TEST=Able to build and boot google/rex without any boot time impact.
Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch renames `SAVE_MRC_AFTER_FSPS` config to
`FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon
SP FSP implementation, where the FSP Silicon Init API produces
Non-Volatile Storage (NVS) instead of the FSP-Memory Init API.
According to the FSP 2.x specification (section 11.3), the FSP
populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and
expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB
after the FspMemoryInit() API in API mode.
However, not all Intel SoC platforms that support the FSP 2.x
specification adhere to this requirement. For example, the FSP binary
for XEON SP platform produces NVS data (aka
FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API.
Therefore, attempting to locate NVS data after the FspMemoryInit() API
on these platforms would result in an error. The `save_mrc_data.c`
implementation provides the required hooks to locate the NVS post
FSP-Silicon Init and store into Non-Volatile Storage.
BUG=b:296704537
TEST=Able to build and boot Intel Xeon SP w/o any functional impact.
Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic49cb6c67aa707efa6495788137b550683008868
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add an option to invert write protect polarity for GL9750.
Change-Id: I5761f3066291a2400caecbecc79ae893f0a0c146
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77403
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds logic for logging the FW splash screen event to
the event log.
There could be three possible scenarios as below:
1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT
or BMP_LOGO configs not enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not
present in the event log.
39 | 2023-08-27 12:42:54-0700 | System boot | 12
40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5
41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0
2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT
and BMP_LOGO configs are enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
enabled in the event log.
34 | 2023-08-27 12:07:29-0700 | System boot | 11
35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled
36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5
37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0
3. Failed to render FW splash screen (due to any reason if FSP failed
to render the splash screen)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
disabled in the event log.
43 | 2023-08-27 13:06:10-0700 | System boot | 13
44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled
45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5
46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
'useable' -> 'usable'.
Change-Id: Iad2e1ef97a5c98ffa6f33806bce5b77722e687e8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9804fcd9076b5a4813f099db0852a5af5ac36609
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77523
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Idc38c759489976cbdf51d9c4bb950ef6d470b93a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Id7634099e40c0bf97944be124b494c41d6335ad7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When LZMA compression is selected, then it's not needed to check if LZ4
compression is selected in addition. So instead of handling both cases
separately, check for LZ4 only if LZMA is not selected.
This applies to the cases of both, FSP-M and FSP-S.
Change-Id: I4ea61a38baf4c29bf522a50a26c6b47292e67960
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77323
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix the issue by adding the "ifeq" keyword which makes the extraneous
text a correct conditional directive.
Change-Id: Id8a8aa7acfdaeb0549f417fb013b2535a7298045
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77286
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch uses the CSE firmware specific data to store Intel
ISH firmware related information. Sending an ISH partition version
information command on every boot cycle would impact the overall boot
performance.
This information is used by the auto-test framework to ensure the ISH
firmware update is proper for in-field devices.
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified ISH FW version is
getting displayed across warm resets without impacting the boot time.
Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch adds a new configuration option to allow the compression
algorithm for the logo cbfs file to be specified. By default, the logo
cbfs file is compressed using LZMA. However, enabling LZ4 compression
can save ~2ms of boot time when the BMP_LOGO config is enabled.
This patch verified that the logo cbfs file can be booted using either
LZMA or LZ4 compression.
BUG=b:284799726
TEST=Able to boot google/rex and verified firmware splash screen using
either LZMA or LZ4 compression.
Change-Id: Ib0aa5320632ae3f734004d2b1d495af11c2e1928
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set the ACPI device status to hidden, since no driver is necessary or
available under Windows.
Linux is unaffected as it does not use the ACPI device status.
TEST=build/boot Win11 on google/akemi
Change-Id: Ib1e274084400fa47e483267d331e632ceb5be757
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75178
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an API to convert BMP images into GOP BLT buffers for
Intel FSP-S. This is required to display the OEM splash screen at
pre-boot phase.
Previously, Intel FSP-S had provision to consume the *.BMP file as is.
However, starting with the Alder Lake platform, Intel FSP has dropped
this conversion logic and expects the boot firmware to pass the BLT
buffer directly.
This patch implements the conversion logic in coreboot.
BUG=b:284799726
TEST=Able to build and boot google/rex
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
It makes no sense to expose these symbols to the user in the menu.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6eb78d12afdc0828bf5e2d305f033d2f0cf4622a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
Width of registers are always dwords on pl011, not bytes.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I955319d31bba5c0cd4d50f2b34111d51fea653ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This is unused - other references were removed long ago.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia7a65f54c736db20a5440795fdfaa8be31ef971f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the drivers directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9241d713fb8cc26c768746c8e442b46292036d20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76694
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ideed4b333632df5068b88dde6f89d3831e3046d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In the datasheet of ILI9882T [1] section 3.11 Power On/Off Sequence,
the TReset-CMD (Reset to First Command in Display Sleep In Mode) should
be larger than 10ms, but it's 1.1ms now. This may cause abnormal
display as some commands may be lost during power on. Fix this and
leave some margins by increasing TReset-CMD to 20ms. Also, to align
with the kernel driver structure starry_ili9882t_init_cmd, add 20ms
delay at the end of command.
[1] ILI9882T_Datasheet_20220428.pdf
BUG=b:293380212
TEST=Boot and display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ifdcaf0e34753fc906817c763f1c8e7389448d1dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76766
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iab55c57ee5cac60911c9fe4cee8d86a252bde372
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7c9c938bd20d36be8fdfb0d95bb58a7259650693
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I03c21e180e9e399e5cb451bf3b9cfb6484cab68b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76778
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I80b4b2df4a38dcbb28d928018446e91acae90ee6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is a problem of screen shake on the old panel[1]. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code is
mainly adjusted for GOP timing. When Display sleep in, raise all GOP
signals to VGHO and then drop to GND. In order to be consistent with
the current panel model, let's rename this file.
[1]: INX old panel product number is HJ110IZ-01A-B1, and the new
panel product number is HJ110IZ-01A-B2. We have recalled the shipment
old panel.
BUG=b:270276344
BRANCH=trogdor
TEST= test firmware display pass
Change-Id: I2b2534afee1ed700c39d3c360aafd685b63ccbfb
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Allows the new Infineon TPM chip used on Clevo laptops to be recognized.
Change-Id: I2ee31b787d80c0b9c24c748b1b28906a22a1dee7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The OxPCIe952 serial cards currently fails after entering
postcar, since the state of oxpcie_present is not maintained
from previous stage.
As a quick work-around test the expected UART register space
to see if anyone decodes the address.
Change-Id: I5601034be6e413616fb3433c894fb008a3e02138
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74597
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot logs the error below, since the value of hporch is too small. Increasing hbl from 80 to 174, and hso from 40 to 72 to revise the HBP(Horizontal Back Porch) and HFP(Horizontal Front Porch). After revising this, the actual measurement frame rate is 60.1Hz.
[ERROR]HFP plus HBP is not greater than d_phy, the panel may not work
properly.
BUG=b:284812193
TEST=cbmem -c | grep "ERROR" and measure frame rate
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I7de5984ce8aec12d8ebe292974e05776835330d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76218
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I40b8482f41e8fece55fd60fec7ec3f63f83bd030
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76280
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserving resources needs to have inclusive region ends.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I88a09d205ef9699de7f18e0a2f33c9ad3ce9fa36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76279
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
