| Age | Commit message (Collapse) | Author |
|---|
|
Add PROP method under \_SB.DPTF.TPWR scope which will return static
worst case rest of platform power in miliWatts.
This value is static, which has to configured from devicetree of
overridetree for each platform
BUG=b:205928013
TEST=Build, boot brya0 and dump SSDT to check PROP method
Scope (\_SB)
{
Device (DPTF)
{
Device (TPWR)
{
Method (PROP, 0, Serialized)
{
Return (XXXX)
}
}
}
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I1415d2a9eb55cfadc3a7b41b53ecbec657002759
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=None
TEST=Build and boot to OS in Skyrim. Ensure that the XHCI controllers
are enumerated successfully and ACPI device objects are added in SSDT.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7ad4555212ed38ea0f9029275345e4945855a8c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the member `use_gpio_for_status` to the structure
`drivers_usb_acpi_config`, so the `devicetree.cb` can specify it.
This field is then used to initialize the corresponding field in the
structure `acpi_power_res_params` in `usb_acpi_fill_ssdt_generator()`.
The member `acpi_power_res_params::use_gpio_for_status()` is already
being used by `acpi_device_add_power_res()` to determine which version
of the `_STA()` method to output.
BRANCH=None
BUG=b:225022810
TEST=Dump SSDT table for guybrush
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I69eb5f1ad79f3b2980f43dcf4a36585fca198ec9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Before:
[DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns
[DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7
[DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7
After:
[DEBUG] dw_i2c: SoC 400/3000 ns Bus: 400/1000000 ns
[DEBUG] dw_i2c: period 334 rise 13 fall 2 tlow 174 thigh 80 spk 7
[DEBUG] dw_i2c: hcnt = 104 lcnt = 202 sda hold = 7
BUG=None
TEST=Check that the formatting looks correct, as above.
Change-Id: I6703a5d6512cee7848edae27afcfd82eb89bcacb
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit 3ba6f8cdf (drivers/intel/fsp2_0: Add native implementation for
FSP Debug Handler) implements a native FSP debug handler.
However, coreboot still can't control when to redirect FSP debug
output to the serial console, i.e., at present, integrating a FSP debug
binary is enough to output FSP serial messages irrespective of whether
user is intended to see FSP debug log.
coreboot needs additional mechanism to control FSP debug binary to
redirect debug messages over serial port. This patch introduces a
config `FSP_ENABLE_SERIAL_DEBUG` to control the FSP debug output, user
to enable this config from site-local config file in case like to override
the default FSP serial redirection behaviour in more controlled way from
coreboot.
There could be scenarios as below:
Scenario 1: coreboot release image integrated with the FSP debug
binaries, is capable of redirecting to the serial console, but coreboot
decides to override the config as below to skip FSP debug output
redirection to the serial port.
`#`FSP Serial console disabled by default (do not remove)
`#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set
Scenario 2: For coreboot serial image with FSP debug binaries integrated
but coreboot decides to skip FSP debug output redirection to the serial
port.
`#`FSP Serial console disabled by default (do not remove)
`#`CONFIG_FSP_ENABLE_SERIAL_DEBUG is not set
CONFIG_CONSOLE_SERIAL=y
CONFIG_CONSOLE_SERIAL_115200=y
CONFIG_UART_DEBUG=y
CONFIG_UART_FOR_CONSOLE=0
Scenario 3: The final image could be a coreboot serial image with FSP
serial redirection enabled to output to the serial port.
CONFIG_FSP_ENABLE_SERIAL_DEBUG=y
CONFIG_CONSOLE_SERIAL=y
CONFIG_CONSOLE_SERIAL_115200=y
CONFIG_UART_DEBUG=y
CONFIG_UART_FOR_CONSOLE=0
BUG=b:227151510
TEST=Able to build and boot google/redrix with all scenarios between #1--#3
and able to meet the expectation as mentioned above.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0b008ca9d4f40bfa6a989a6fd655c234f91fde65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow-up commits move this to a common place.
Change-Id: I26a37f9384a581a8a750efccc2100a5c6a6f0f85
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The hob finding functions are never looped over so there is no point
for the 'next' inside their name.
Change-Id: I18e452d313612ba14edda479d43f2797f6c84034
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As per Intel Dynamic Tuning revision 1.3.13 (Doc no: 541817) add
support for TBAT device under \_SB.DPTF
BUG=b:205928013
TEST=Build, boot brya0 and dump SSDT to check TBAT device
Device (TBAT)
{
Name (_HID, "INTC1061") // _HID: Hardware ID
Name (_UID, "TBAT") // _UID: Unique ID
Name (_STR, "Battery Participant") // _STR: Description String
Name (PTYP, 0xC)
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I9104318fd838f30253ab1eeac4e212b3b917f516
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Checking whether a pointer is NULL after it has been dereferenced makes
zero sense. Make sure the `wifi_ssdt_write_properties()` function never
gets invoked with a NULL argument for the `dev` parameter, and simplify
the logic around the `is_cnvi_ddr_rfim_enabled` variable accordingly.
Change-Id: I3fbc9565e7e9b4e1c14a68f6a5fd779577045236
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update ADL CPU IDs per correct steppings listed in Intel Doc 626774.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I722043c493b8c3de8965bcaa13f33c907d51f284
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch replaces the implementation that is used to get the number of
variable MTRRs with `get_var_mtrr_count()` function.
BUG=b:225766934
TEST=Able to build and boot google/redrix board to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4751add9c45374e60b7a425df87d06f52e6fcb8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch enriches coreboot FSP2.0 driver to extract the FSP timestamp
from FPDT (Firmware Performance Data Table) and display right after
FSP-S exits (from `fsp_silicon_init()` function), based on SoC user
selects the required `DISPLAY_FSP_TIMESTAMPS` config.
The prerequisite to this implementation is to have FSP binary built with
`PcdFspPerformanceEnable` PCD set to `TRUE` to allow FSP to populate
the FPDT HOB.
BUG=b:216635831
TEST=Able to dump FSP performance data with DISPLAY_FSP_TIMESTAMPS
Kconfig selected and met the FSP prerequisites.
+--------------------------------------------------+
|------ FSP Performance Timestamp Table Dump ------|
+--------------------------------------------------+
| Perf-ID Timestamp(ms) String/GUID |
+--------------------------------------------------+
0 460253 SEC/52c05b14-0b98-496c-bc3b04b50211d680
50 460263 PEI/52c05b14-0b98-496c-bc3b04b50211d680
40 460274 PreMem/52c05b14-0b98-496c-bc3b04b50211d680
1 495803 9b3ada4f-ae56-4c24-8deaf03b7558ae50
2 508959 9b3ada4f-ae56-4c24-8deaf03b7558ae50
1 515253 6141e486-7543-4f1a-a579ff532ed78e75
2 525453 6141e486-7543-4f1a-a579ff532ed78e75
1 532059 baeb5bee-5b33-480a-8ab7b29c85e7ceab
2 546806 baeb5bee-5b33-480a-8ab7b29c85e7ceab
1 553302 1b04374d-fa9c-420f-ac62fee6d45e8443
2 563859 1b04374d-fa9c-420f-ac62fee6d45e8443
1 569955 88c17e54-ebfe-4531-a992581029f58126
2 575753 88c17e54-ebfe-4531-a992581029f58126
1 582099 a8499e65-a6f6-48b0-96db45c266030d83
50f0 599599 unknown name/3112356f-cc77-4e82-86d53e25ee8192a4
50f1 716649 unknown name/3112356f-cc77-4e82-86d53e25ee8192a4
2 728507 a8499e65-a6f6-48b0-96db45c266030d83
1 734755 9e1cc850-6731-4848-87526673c7005eee
....
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia1b7f6b98bafeec0afe843f0f78c99c2f34f50b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Add a stack in .bss for C execution. This will make it easier to move
the setup of MTRRs in C code.
Change-Id: I67cbc988051036b1a0519cec9ed614acede31fd7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
As per Intel Dynamic Tuning revision 1.3.13 (Doc no: 541817)
Add support for TPWR device under \_SB.DPTF
BUG=b:205928013
TEST=Build, boot brya0 and dump SSDT to check TPWR device
Device (TPWR)
{
Name (_HID, "INTC1060") // _HID: Hardware ID
Name (_UID, "TPWR") // _UID: Unique ID
Name (_STR, "Power Participant") // _STR: Description String
Name (PTYP, 0x11)
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I437e509f58df1777d75e5981f0a5a63095ccb6a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62944
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce scope of get_next_hob and drop unused functions.
Change-Id: I81007295ed2d1592c4d829cbb277c0726d89ea4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Ifc95a093cf86c834d63825bf76312ed21ec68215
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only Cr50 versions starting at 0.5.5 support long IRQ pulses, so this
feature is enabled based on the value of the board_cfg register (see
CB:61722).
However, Ti50 versions below 0.0.15 don't support the board_cfg
register, and trying to access it will cause I2C errors (see CB:63011).
Also, all Ti50 versions only support long IRQ pulses. Therefore, add a
workaround to force enable long IRQ pulses for boards using Ti50
versions under 0.0.15, instead of enabling it based on board_cfg. This
workaround will be removed once all Ti50 stocks are updated to 0.0.15 or
higher.
BUG=b:225941781
TEST=Boot nivviks and nereid to OS with Ti50 0.0.14 and check there are
none of these I2C errors:
[ERROR] I2C stop bit not received
[ERROR] cr50_i2c_read: Address write failed
[ERROR] cr50_i2c_tis_status: Failed to read status
Change-Id: Iaba71461d8ec79e8d6efddbd505339cdf1176485
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63160
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<"
Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This patch implements coreboot native debug handler to manage the FSP
event messages.
`FSP Event Handlers` feature introduced in FSP to generate event
messages to aid in the debugging of firmware issues. This eliminates
the need for FSP to directly write debug messages to the UART and FSP
might not need to know the board related UART port configuration.
Instead FSP signals the bootloader to inform it of a new debug message.
This allows the coreboot to provide board specific methods of reporting
debug messages, example: legacy UART or LPSS UART etc.
This implementation has several advantages as:
1. FSP relies on XIP `DebugLib` driver even while printing FSP-S debug
messages, hence, without ROM being cached, post `romstage` would
results into sluggish boot with FSP debug enabled.
This patch utilities coreboot native debug implementation which is
XIP during FSP-M and relocatable to DRAM based resource for FSP-S.
2. This patch simplifies the FSP DebugLib implementation and remove the
need to have serial port library. Instead coreboot `printk` can be
used for display FSP serial messages. Additionally, unifies the debug
library between coreboot and FSP.
3. This patch is also useful to get debug prints even with FSP
non-serial image (refer to `Note` below) as FSP PEIMs are now
leveraging coreboot debug library instead FSP `NULL` DebugLib
reference for release build.
4. Can optimize the FSP binary size by removing the DebugLib dependency
from most of FSP PEIMs, for example: on Alder Lake FSP-M debug binary
size is reduced by ~100KB+ and FSP-S debug library size is also
reduced by ~300KB+ (FSP-S debug and release binary size is exactly
same with this code changes). The total savings is ~400KB for each
FSP copy, and in case of Chrome AP firmware with 3 copies, the total
savings would be 400KB * 3 = ~1.2MB.
Note: Need to modify FSP source code to remove `MDEPKG_NDEBUG` as
compilation flag for release build and generate FSP binary with non-NULL
FSP debug wrapper module injected (to allow FSP event handler to execute
even with FSP non-serial image) in the final FSP.fd.
BUG=b:225544587
TEST=Able to build and boot brya. Also, verified the FSP debug log is
exactly same before and with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1018e67d70492b18c76531f9e78d3b58fa435cd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
FSP 2.3 spec introduced new version of NV storage HOB
FSP_NON_VOLATILE_STORAGE_HOB2. This new HOB addresses the limitation of
FSP_NON_VOLATILE_STORAGE_HOB which can support data length
upto 64KB. FSP_NON_VOLATILE_STORAGE_HOB2 allows >64KB of NVS data to be
stored by specifying a pointer to the NVS data.
FSP_NON_VOLATILE_STORAGE_HOB HOB is deprecated
from FSP 2.3 onwards and is maintained for backward compatibility only.
This patch implements the parsing method for
FSP_NON_VOLATILE_STORAGE_HOB2 HOB structure .The HOB list is first
searched for FSP_NON_VOLATILE_STORAGE_HOB2. If not found we continue
to search for FSP_NON_VOLATILE_STORAGE_HOB HOB.
BUG=b:200113959
TEST=Verified on sapphire rapids and meteor lake FSP platform that
introduces FSP_NON_VOLATILE_STORAGE_HOB2 for retrieving MRC cached data.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27647e9ac1a4902256b3f1c34b60e1f0b787a06e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Ti50 FW under 0.15 is not support board cfg command which causes I2C
errors and entering recovery mode. And ODM stocks are 0.12 pre-flashed.
Add workaround for the old Ti50 chip.
BUG=b:224650720
TEST=no I2C errors in coreboot.
[ERROR] cr50_i2c_read: Address write failed
[INFO ] .I2C stop bit not received
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ieec7842ca66b4c690df04a400cebcf45138c745d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The Realtek RT8168 and RTL8111K have a similar programming interface,
therefore add the PCI device ID for the RTL8111K into driver for support.
BUG=b:226253265
TEST=emerge-brask coreboot chromeos-bootimage.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I5ad8f14483393d6f25026847cc0d4229d362bba0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
coreboot needs to propagate the CnviDdrRfim value info of the feature
enable/disable state into the CNVi via the WiFi DSM ACPI object. This
will be consumed by the Wi-Fi driver and it will act according to
CB enablement configuration. This patch adds _DSM method for that.
Add support for following 2 functions in _DSM method
- Function 0: Function Support Query Returns a bitmask of functions
supported.
- Function 3: RFI enablement 0 Feature Enable 1 Feature Disable
Note: Wifi Dsm already has provision for SAR. This patch will add
additional support to return RFIM structure based on UUID.
BUG=b:201724512
TEST=Build, boot brya0 and dump SSDT entries
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
ToBuffer (Arg0, Local0)
If ((Local0 == ToUUID ("7266172c-220b-4b29-814f-75e4dd26b5fd")))
{
ToInteger (Arg2, Local1)
If ((Local1 == Zero))
{
Return (Buffer (One)
{
0x09
})
}
If ((Local1 == One)){}
If ((Local1 == 0x02)){}
If ((Local1 == 0x03))
{
Return (Zero)
}
Return (Buffer (One)
{
0x00
})
}
Return (Buffer (One)
{
0x00
})
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I217b736df3d4224a6732d1941a160abcddbd8f37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Windows 11 installer expects the TPM to reside under \\_SB_.PCI0 in
ACPI device hierarchy, otherwise the TPM is not detected. Hardcode
the path to fix the issue.
TEST=Boot Windows 11 on Clevo NV41MZ and see the TPM is detected
correctly
TEST=Boot Ubuntu 20.04 on Clevo NV41MZ and see the TPM is detected
correctly
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: If0b3136e3eb8eb1bb132132a5f3a7034bdd3b424
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
cr50_get_board_cfg() may be called in ramstage for some mainboards in
order to determine the BOARD_CFG register's value. The code was
written assuming that the firmware version was already retrieved, but
for boards calling this in ramstage, this is not the case. Therefore,
instead of using the cached cr50_firmware_version (which is all 0s in
ramstage at that time), use the cr50_get_firmware_version function
instead.
BUG=b:225206079, b:220685274
BRANCH=firmware-brya-14505.B
TEST=boot on brya0 and see:
[INFO ] Firmware version: B2-C:0 RO_B:0.0.11/4d655eab RW_B:0.6.93/cr50_v3.94
[INFO ] Enabling GPIO PM b/c CR50 has long IRQ pulse support
in the logs.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia6e5f4965a8852793d2f95e6eb21ea87860335a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add an option to set L1 entry delay to Max for GL9763E. The L1 entry
delay will be changed to expected value by sdhci-pci-gli driver in
Linux v5.14.
BUG=b:220079865
TEST=build and verify the value of GL9763E's 0x8A4[28:19] register is
0x3FF.
Change-Id: I19d4dfb7b873d09ff30ad4d2d63b876047c21601
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
This patch is adding support for Cirrus Logic CS35l41/CS35l53
smart amplifier. This part is now used in number of new chromebook's
HW designs by several vendors.
This driver uses the ACPI Device Property interface to generate
the required parameters into the _DSD table format expected by
the kernel. For detailed information about these properties, please
check Linux kernel documentation:
/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
Change-Id: I2cbb1cef89f8d56ee73fab06c68933a2ab8c3606
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
serially""
This reverts a change that was causing hangs and exceptions during boot
on an ADL brya4es.
The hang (or APIC exception) occurs at what appears to be the FSP MP
initialization sequence, prior to the "Display FSP Version Info HOB"
log being displayed :
[DEBUG] Detected 10 core, 12 thread CPU.
[DEBUG] Display FSP Version Info HOB
This reverts commit 40ca79714ad7d5f2aa201d83db4d97f21260d924.
BUG=b:224873032
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and verify brya4es
is able to successfully reboot 200 times without any issues.
Change-Id: I88c15a51c5d27fbd243478c923e75962d3f8d67d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In the devicetree case where a generic device underneath the Intel PCI
CNVi device carries the device properties, the incorrect device was
passed to wifi_ssdt_write_properties.
Also while here, update the UUID for `DmaProperty` to match what
Microsoft defined here:
https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
BUG=b:215424986, b:220639445
TEST=dump SSDT and see that _PRW for CNVi device is no longer garbage,
but contains the value from the devicetree (GPE0_PME_B0).
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iafd86458d2f65ccb7e74d1308d37fd3ebbf7f520
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
|
|
In usb4_retimer_fill_ssdt(), it search all dpf ports and shows message
in not support dpf ports.
It's not error and changes the loglevel prefix to BIOS_INFO.
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I508ec7662e078893f944edb3d68364c57d5c5a73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
dev->ops = &wifi_cnvi_ops need is_cnvi be true. This cause the exclusive
statement so is_cnvi never be true in !DEVTREE_EARLY.
BUG=b:224317408
TEST=no assertion in coreboot.
[EMERG] ASSERTION ERROR: file 'src/acpi/acpigen_pci.c', line 24
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I1ca6312ce164c43021686b483f6579164614cede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US,
which controls how long to wait for an I2C devices to
produce/accept all the data bytes in a single transfer.
(The device can delay transfer by stretching the clock of
the ack bit.)
The default value of this new setting is 500ms. Existing
code had timeouts anywhere from tens of milliseconds to a
full second beween various drivers. Drivers can still have
their own shorter timeouts for setup/communication with the
I2C host controller (as opposed to transactions with I2C
devices on the bus.)
In general, the timeout is not meant to be reached except in
situations where there is already serious problem with the
boot, and serves to make sure that some useful diagnostic
output is produced on the console.
Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
instead
Only one ACPI device should be added to a PCIe root port. For the root
ports which already have device created, the generated code from this
driver needs to be merged with the existing device.
By default, this driver will create new device named DEV0.
This change allows to generate code under an existing device.
ex: (generate code under PXSX):
Scope (\_SB.PCI0.RP01.PXSX)
{
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package (0x01)
{
Package (0x02)
{
"UntrustedDevice",
One
}
}
})
}
BUG=b:221250331
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I80634bbfc2927f26f2a55a9c244eca517c437079
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 6af980a2aeca9b8cedfb3d7734389e6e36099c88.
BUG=b:199246420
Change-Id: Iddb7aa6d52b563485a496798f2fe31ed64b4f4a8
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Reference: chapter2 in Meteor Lake EDS vol1 (640228)
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie71abb70b88db0acec8a320c3e2c20c54bbb4a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62581
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some non-SoC code might want to know whether or not the CNVi DDR RFIM
feature is enabled. Also note that future SoCs may also support this
feature. To make the CnviDdrRfim property generic, move it from
soc/intel/alderlake to drivers/wifi/generic instead.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Idf9fba0a79d1f431269be5851b026ed966600160
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
|
|
This patch replaces remaining `cb_err_t` with `enum cb_err` after commit
hash 69cc557c (commonlib/bsd: Remove cb_err_t) removes majority of
`cb_err_t` instances.
TEST=Able to build the brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3392f9c2cfb4a889a999c8ea25066c89979f0900
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
cb_err_t was meant to be used in place of `enum cb_err` in all
situations, but the choice to use a typedef here seems to be
controversial. We should not be arbitrarily using two different
identifiers for the same thing across the codebase, so since there are
no use cases for serializing enum cb_err at the moment (which would be
the primary reason to typedef a fixed-width integer instead), remove
cb_err_t again for now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch aims to make timestamps more consistent in naming,
to follow one pattern. Until now there were many naming patterns:
- TS_START_*/TS_END_*
- TS_BEFORE_*/TS_AFTER_*
- TS_*_START/TS_*_END
This change also aims to indicate, that these timestamps can be used
to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Set the log level to BIOS_NOTICE for the case where the mainboard can
not provide a MAC address since this can be a valid case. Showing this
message with log level BIOS_ERR is not appropriate.
In addition, rephrase the message to make clear that if the mainboard
does not provide a MAC address the one stored in the MAC will be used.
Change-Id: Ibfc58845f0ea47ced048b446e685c4860a29f075
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This allows mainboards using an I2C bus to communicate with the cr50
to reuse the functionality related to firmware version and BOARD_CFG.
BUG=b:202246591
TEST=boot on brya0, see cr50 FW version in logs
Change-Id: Ide1a7299936193da3cd3d15fdfd1a80994d70da0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Mainboards accessing the cr50 over an I2C bus may want to reuse some of
the same firmware version and BOARD_CFG logic, therefore refactor this
logic out into a bus-agnostic file, drivers/tpm/cr50.c. This file uses
the new tis_vendor_read/write() functions in order to access the cr50
regardless of the bus which is physically used. In order to leave SPI
devices intact, the tis_vendor_* functions are added to the SPI driver.
BUG=b:202246591
TEST=boot to OS on google/dratini, see the same FW version and board_cfg
console prints as before the change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie68618cbe026a2b9221f93d0fe41d0b2054e8091
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Similar to commit 09c047c, the WWAN device might be considered an
untrusted device by some platforms, therefore add an option to add the
same `DmaProperty` to the WWAN _DSD.
BUG=b:215424986
BRANCH=brya
TEST=dump SSDT, see new property
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If485ac5314fae6e6faefac43fcfcea4f4cdd02c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with
PCI_{DID,VID}_ using the commands below, which also take care of some
spacing issues. An additional clean up of pci_ids.h is done in
CB:61531.
Used commands:
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g'
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g'
Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In order to align with established standards for establishing DMA
boundaries[1] from ACPI, the UntrustedDevice property has been renamed
to DmaProperty, which follows Microsoft's implementation. After
discussions with Microsoft, they have agreed to make the `UID` property
optional, so it is left out here, and instead it can be applied to:
1) Internal PCI devices
2) PCIe root ports
3) Downstream PCI(e) devices
[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
BUG=b:215424986
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id70e916532e3d3d70305fc61473da28c702fc397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Instead of using raw integers to indicate success/failure, enum cb_err
can be used to makes things clearer, so this patch converts most
functions to return that instead of int.
TEST=boot to OS on google/dratini, no TPM errors seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ifb749c931fe008b16d42fcf157af820ec8fbf5ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add DPTS (device prepare to sleep) method that is to be called in
mainboard's \_SB.MPTS, which is called in _PTS.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ie308f74940a33711a398bc11d0550cb06b55cdcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Turns out 200ms still isn't enough in the worst reset conditions.
There's been some reports of failures at 200ms with some older
cr50 versions. Let's not take any chances and bump this way up
since if this fails, it prevents boot.
BUG=b:213828947
BRANCH=None
TEST=Reboot and suspend_stress on Nipperkin
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5be0a80c064546fd277f66135abc9d0572df11cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since commit 7cd8ba6eda (console: Add loglevel prefix to interactive
consoles) on the very first boot some errors occur because no MRC data
is present in the MRC cache. This is normal because the memory training
is not done yet.
This patch changes the loglevel to BIOS_NOTICE which will prevent an
error in the log in this case.
Change-Id: I1e36590e33507515e5b9dd4eb361b3dbe165511e
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61973
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPUID_ALDERLAKE_N_A0 is ES. Add it to generate is_es = 1 in ACPI
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Icc65c52a9dadebe4ebab3d0c30599eb0db38bc3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change-Id: I1cb517323e7d609ae6624363e116e9814fc631cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ie9f4562be9b019d8dd65d4e9040fefbb6834fa03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Spaces before tabs are not allowed.
Change-Id: I1aa8490cb81a77f48d69c16c175eb4fec70dc0db
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62054
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
To get verbose MRC log includes RMT log, we need to set
FSP_LOG_LEVEL_ERR_WARN_INFO instead.
TEST=tested on gimble, see MRC verbose and RMT log are printed
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Change-Id: I3896f0482dfde090b4e087490b7937683b5de091
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix always-true conditions to properly test whether a bit is set.
Change-Id: I54b5dbfdbb99a47ef0dfdb9497179f516d6e1f23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As 4-byte addressing mode is not support in coreboot, change the
addressing mode of SPI NOR from 4-bytes to 3-bytes.
BUG=b:215605946
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
Change-Id: Ied5b647d0fcc8e3effff3bb7c8680ed5a0c1f3d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This fixes building with -jx
Change-Id: I51efc03839c53b96fa248e6fe5dc0e00b773aa53
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add a new configuration parameter "enable_aspm_l1_2".
Write value 0xe059000f to register offset 0xb0 to allow kernel driver to
enable ASPM L1.2.
Use Kconfig "PCIEXP_ASPM" and "enable_aspm_l1_2" to decide whether to
enable ASPM L1.2.
BUG=b:204309459
TEST=emerge and test if the driver can read the correct value
Change-Id: I944dbf04d3ca19df4de224540bee538bff4d1f12
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `chip` argument passed around to many functions in this driver is
actualy unused, so remove it where it is unused.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib8d32fdf340c8ef49fefd11da433e3b6ee561f29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Instead of having runtime failures that are hard to debug because SMM
debugging is disabled by default assert some properties of fmap at
buildtime.
Change-Id: I5b5b511142d93d5799565a8936e9a087117044b3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Guard macro via CONFIG_INTEL_GMA_ADD_VBT, rather than guarding
each of the calls to it (most of which are currently unguarded).
Test: build google/coral w/ and w/o CONFIG_INTEL_GMA_ADD_VBT selected,
verify VBTs added (or not) to CBFS based on Kconfig selection.
Change-Id: Ic25554cb2c61b81bdb4b0987094c3558e0bbcbd8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This new chip driver will be used for attaching ACPI properties to PCIe
endpoints. The first property it supports is "UntrustedDevice." This
property can be used by a payload to, e.g., restrict the device to its
own IOMMU domain for security purposes. The new property is added by
adding a _DSD and an integer property set to 1.
Example of the property from google/brya0:
Scope (\_SB.PCI0.RP01)
{
Device (DEV0)
{
Name (_ADR, 0x0000000000000000) // _ADR: Address
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"UntrustedDevice",
One
}
}
})
}
}
BUG=b:215424986
TEST=boot patch train on google/brya0, dump SSDT, see above for snippet
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I53986614dcbf4d10a6bb4010e131f5ff5a9d25cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: I25f56a6f3ca1814666929e91400f52b75a5d607d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Support PXSX._RST and PXSX.MRST._RST for warm and cold reset.
PXSX._RST is invoked on driver removal.
build dependency:
soc/intel/common/block/pcie/rtd3
This driver will use the rtd3 methods for the same parent in the device
tree. The rtd3 chip needs to be added on the same root port in the
devicetree separately.
Test:
Add chip entry to the corresponding root port and check PXSX Device
is generated in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1e0b9fd405f6cfb1e216ea27558bb9299a09e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61354
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The UART8250_FCR_TRIGGER bits are bits 6 and 7 in the register, so
rewrite the mask and constants as constants shifted by 6.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0663c1a641355b7bfb59f41479d17117178fb895
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib726dd77eaf1a4f8a7d9fbf8ab6d46a7bb1de6c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
UART8250_FCR_RXSR is a redefinition of UART8250_FCR_CLEAR_RCVR,
UART8250_FCR_TXSR a redefinition of UART8250_FCR_CLEAR_XMIT and
UART8250_LCR_BKSE a redefinition of UART8250_LCR_DLAB. None of those
redefinitions are used, so just drop them.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b9edae67180b04ff1c887c5742c07c774fc9c59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
The Linux kernel has the idea of an "untrusted" PCI device, which may
have limited I/O and memory access permissions, depending on which IOMMU
domains it may be a part of.
https://crrev.com/c/3406512 is a backport to the ChromiumOS kernel which
checks for this property.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: I1a02ca7c5f717097ec97cf6373b9e0b81a13e05d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The speed control bits of the Designware I2C controller are bits 1 and 2
in the control register, so the values should be written as number
shifted by the number of the first bit. The resulting constant is
identical.
TEST=Timeless build for amd/chausie results in identical binary
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0881dfcd7703ab6a70a9b1a355d5a93771aebc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch aligns fsp_header with the Intel specification 2.0 and 2.3.
The main impetus for this change is to make the fsp_info_header fully
accessible in soc/vendor code. Here items such as image_revision can be
checked.
TEST=verify image revision output in the coreboot serial log.
compare to FSP version shown in serial debug output.
verify Google Guybrush machine boots into OS.
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: Ibf50f16b5e9793d946a95970fcdabc4c07289646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d96e5f72a8b3552ab39c1d298bafcc224bf9e55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61512
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie5c83f16146517d0aa37cd1975de725f57323094
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2313dc209eb9035f1026a1f37ef8146c57c60986
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Outside of the designware I2C driver the generic platform_i2c_transfer
function should be used instead, so don't make dw_i2c_transfer available
outside of this file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8b6a08b6aa2cd63adc2ef69b828661fa0ed154a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic1812c4d8d2b4d9ad331a787bd302a4f0707c1fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55e6d93ca141b687871ceaa763bbbbe966c4b4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code. This commit only changes the return value of the static
functions in this file keeping the external interface identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I80300e0b24591fc660c3134139b9257e002cdbbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
size_t is defined in stddef.h and not stdint.h, so include types.h to
get both.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3782d3a949b72d1530ebd8078c46bc695f76dc4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will provide the definitions for size_t, uint32_t and uintptr_t.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icda8d458565bf981545d720d612cbdace04bedd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Current max count for camera power ops is 5 which is not sufficient.
If we increase the ops by 1 in current variants the compiler
will not throw error for intel mipi camera driver.
Hence increase current max count for camera power ops to 6 from 5.
BUG=b:214665783
TEST=Build and boot to OS
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I4f4c090f2275616816dfc697f27520cd1cbc1a80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61146
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without acpi name, acpi_device_path will return NULL.
<NULL>: Intel USB4 Retimer at GENERIC: 0.0
Replace with usb4_retimer_scope for the identify.
BUG=b:215742472
TEST=show below meaasge in coreboot log
\_SB.PCI0.TMD0.HR : Intel USB4 Retimer at GENERIC: 0.0
\_SB.PCI0.TMD1.HR : Intel USB4 Retimer at GENERIC: 0.0
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idfa8b204894409b11936e5f221c218daa206cc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The FSP API is used to notify the FSP about different phases in the
boot process. The current FSP specification supports three notify
phases:
- Post PCI enumeration
- Ready to Boot
- End of Firmware
This patch attempts to make calling into the FSP Notify Phase APIs
optional by using native coreboot implementations to perform the
required lock down and chipset register configuration prior boot to
payload.
BUG=b:211954778
TEST=Able to build brya without any compilation issue and coreboot
log with this code changes when SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT
and SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE config enabled.
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia95e9ec25ae797f2ac8e1c74145cf21e59867d64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add driver for setting up Semtech sx9360 SAR sensor.
The driver is based on sx9310.c. The core of the driver is the same, but
the bindings are slightly different.
Registers are documented in the kernel tree:
Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
[https://patchwork.kernel.org/project/linux-iio/patch/20211213024057.3824985-4-gwendal@chromium.org/]
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Change-Id: I0a912f184e6f3501f894cca24c0d71a2c3087516
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Turns out 150ms isn't enough in the worst reset conditions. On guybrush
the TPM is reset in S0i3 and the CR50 is allowed to hibernate. The CR50
is woken up and initialized early during S0i3 resume. Occasionally the
CR50 isn't ready before the probe times out.
BUG=b:213828947
BRANCH=None
TEST=suspend_stress_test -c 1000
Change-Id: Ifda438080cf1ad2796c7061223a6a97b8e6e9987
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Keith Short <keithshort@chromium.org>
|
|
FSP 2.3 specification introduces following changes:
1. FSP_INFO_HEADER changes
Updated SpecVersion from 0x22 to 0x23
Updated HeaderRevision from 5 to 6
Added ExtendedImageRevision
FSP_INFO_HEADER length changed to 0x50
2. Added FSP_NON_VOLATILE_STORAGE_HOB2
Following changes are implemented in the patch to support FSP 2.3:
- Add Kconfig option
- Update FSP build binary version info based on ExtendedImageRevision
field in header
- New NV HOB related changes will be pushed as part of another patch
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ica1bd004286c785aa8a431f39d8efc69982874c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
I2C bus and address of the TPM are typically fixed on hardware so
there is no need to be able to configure this in menuconfig.
Change-Id: I1b6afa68fe753fb76348e0461209d218b14df7cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: Ifad13ef418db204cf132fe00f75c6e66cd2bc51b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<"
Change-Id: Ifda7b3a798c8b1736e125b2527f95e697951d7bd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using:
diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l 'memalign(\|malloc(\|calloc(\|free(' -- src/)
Change-Id: Id3bd3d8a2d3609a13ecbc4eab14ba745e6365cab
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The variable `custom_count` is the number of custom fields, so only
holds non-negative values, so change the struct member type from int to
size_t.
Change-Id: Ic35aafefc870092298523ba2e10adf4fcb687a01
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60790
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Building an image for OCP DeltaLake with `x86_64-linux-gnu-gcc-11` fails
with the format warning below as the size of char * differs between
32-bit and 64-bit.
CC ramstage/drivers/ipmi/ipmi_fru.o
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_chassis_info_area':
src/drivers/ipmi/ipmi_fru.c:192:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
192 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
193 | "chassis custom data array.\n", __func__,
194 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_board_info_area':
src/drivers/ipmi/ipmi_fru.c:291:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
291 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
292 | "board custom data array.\n", __func__,
293 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_product_info_area':
src/drivers/ipmi/ipmi_fru.c:398:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
398 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
399 | "product custom data array.\n", __func__,
400 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
Fix the mismatches in `read_fru_chassis_info_area()` by using the length
modifier `z` for size_t as that is what `size_of` yields to.
Change-Id: If0c4266b19d56fa88abc397f305154d473ae1a93
Found-by: gcc (Debian 11.2.0-10) 11.2.0
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Found using following command:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/)
Change-Id: I2a6c5b67af1d2544159e92d4b8c06cc1f5504bd2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch maps coreboot console level to FSP debug level. This
is useful to suppress MRC (FSP-M) debug logs.
Callers have to select HAVE_DEBUG_RAM_SETUP config to get verbose MRC
debug log,
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I398d576fad68a0d0fc931c175bbc04fcbc2e54ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Group all data specific to each notify phase in a struct to avoid
redundant code.
Change-Id: Ib4ab3d87edfcd5426ce35c168cbb780ade87290e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Sort includes alphabetically, drop spaces after type casts and unbreak
some long lines that are less than 96 characters long.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I2dafd677abbdd892745fea1bf4414f6e0d5549bb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When coreboot goes to die because FSP returned an error, log the return
value in the message printed by `die()` or `die_with_post_code()`.
Change-Id: I6b9ea60534a20429f15132007c1f5770760481af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
