| Age | Commit message (Collapse) | Author |
|---|
|
Move `locality` field to `struct tpm_inf_dev` and put the rest directly
into `tpm_chip`.
Change-Id: Ic3644290963aca9f8dc7cd8ef754352865ef8d2c
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Replace `Or (a, b)` with `a | b`.
Change-Id: I73842cd4843ebb0b48440059ae9dcf6c82235a76
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70845
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch implements mps2_noop_get_number_of_processors() API with
minimal information required for Intel MTL FSP to utilise the
`MP_SERVICES_PPI_V2_NOOP` config.
The major difference between Intel ADL and MTL FSP in terms of doing
CPU feature programming aka utilizing MP PPI wrapper code is that,
starting with MTL, FSP has dropped the `SkipMpInit` UPD.
It means now, coreboot doesn't have any way to skip FSP doing MP Init
operation. But during ADL, coreboot had introduced the
MP_SERVICES_PPI_V2_NOOP config that is used to skip FSP about
actually running any CPU feature programming on APs.
The idea is to use the same config even in MTL to provide only the
must have information (to bypass any assert in FSP during debug image)
to FSP.
Passing `FSP_UNSUPPORTED` from mps2_noop_get_number_of_processors()
results in `assert` while compiling FSP in debug mode hence,
implementing the function to pass only the information about BSP being
the active processor along with passing `FSP_SUCCESS` (eventually it
makes FSP happy and doesn't run into any issue in debug and/or release
mode).
TEST=Able to build and boot Google/Rex and Google/Kano while
coreboot skip calling into FSP for doing MP init.
Change-Id: I75d7e151699782210e86be564b0055d572cacc3f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70555
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch is to change method of HID assignment with compatible id
style in nau8315_config and allow mainboards to set it.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Change-Id: Ia6f02e495eeb06290947edc9e44fa25a4ce18956
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69965
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
dw_i2c_transfer returns an enum cb_err type, but dw_i2c_dev_transfer
returns an int, so explicitly translate between the types. Since
dw_i2c_transfer only returns either CB_SUCCESS or CB_ERR which are
defined as 0 and -1, this won't change behavior of dw_i2c_dev_transfer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaf2cbcf6564035d5c0fc13f5d5e7ac0d0425e85d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
dw_i2c_soc_dev_to_bus will return -1 if it failed to find an I2C bus
number for a device. In this case return -1 instead of implicitly
casting the -1 to an unsigned int and passing that as bus number to
dw_i2c_transfer. The dw_i2c_base_address call inside _dw_i2c_transfer
already ended up handling this error case correctly, but better handle
the error more directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06b6005cee0c5c43855cb5b388a9911fc286c984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch fixes a typo by adding `Arg0 = 0` to define warm reset.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I92b81697a254c9dab127b200174d32554db1b5cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70721
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Replace `Store (a, b)` with `b = a`.
Change-Id: Ifd3a814228df6a399fe1110abf5b5bc18e6fd6d2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
On nissa, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Allow adding
DmaProperty to the _DSD of the ISH device. This will result in the
kernel marking the device as untrusted.
BUG=b:249846505
TEST=Check SSDT is correct, and kernel detects the DmaProperty and
firmware-name properties.
SSDT entry on yaviks with both add_acpi_dma_property and firmware_name
set in devictree:
Scope (\_SB.PCI0.ISHB)
{
Name (_DSD, Package (0x04) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"firmware-name",
"adl_ish_lite.bin"
}
},
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
Change-Id: Ie1539fc757e72e995e98c3ecf83e705e3bede8c0
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace `ShiftRight (a, b)` with `a >> b`.
Change-Id: I0751d00186e8dff38e02e7bf7d8ebf5a17514a58
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
- Use `size_t' for iteration index variables
- Use the `VGA_COLUMN' macro definition instead of the hard-coded
value
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Verified on Skolas
Change-Id: I1d6595871363ec7602219e72d1260df3722f64de
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70453
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:259716145
TEST=Dump SSDT and see that _PRW and _DSD for CNVi device contains
the value from the devicetree on google/redrix.
Before:
Scope (\_SB.PCI0.WFA3)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
...
}
After:
Scope (\_SB.PCI0.CNVW)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
...
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia4ffedcb53afe350694eb03a144d12f714190cc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70447
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The following are considered "expected" situations, where we shouldn't
print error messages as in other unexpected errors:
1. When the previous boot is in recovery mode, under certain config
combination the normal MRC cache would have been invalidated.
Therefore the "couldn't read metadata" error is expected to show in
the current normal boot. Special-case this situation by printing a
different message.
2. If the platform doesn't have recovery cache (!HAS_RECOVERY_MRC_CACHE)
and vboot starts before romstage (!VBOOT_STARTS_IN_ROMSTAGE), then
there should be no region for recovery cache. In this case, "failed
to locate region type 0" will be shown. Since it's pretty clear from
the code that this is the only case for the error to happen, simply
change it to BIOS_DEBUG. Also remove a duplicate message when
mrc_header_valid() fails.
BUG=b:257401937
TEST=emerge-corsola coreboot
TEST=Ran `cbmem -1 | grep ERROR` in recovery boot
TEST=Ran `cbmem -1 | grep ERROR` in normal boot following recovery boot
BRANCH=corsola
Change-Id: Ia942eeecaca3f6b2b90bac725279d2dc6174e0fd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69542
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic7139f0adc0ce4556268612f5e77eb01738fc068
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70471
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idc9dd4434a8023af4758f921f6279d09059166d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I97b073bfc291b13719a199b277f22b477647db8e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70470
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I43c6dc0eb19d9be908c98fb6316f87747605b91e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51798
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Currently the MRC cache is updated in romstage, immediately after
returning from FSP-M. Since cbmem is not cached in romstage, the update
is slow (~6 ms on nissa). Specifically, the new MRC data returned by the
FSP is stored in the FSP reserved memory in cbmem, so hashing the new
data is slow.
Move the MRC cache update to ramstage, where cbmem is cached. On nissa,
this saves ~5 ms of boot time.
Before:
552:finished loading ChromeOS VPD (RW) 631,667 (16)
3:after RAM initialization 637,703 (6,036)
4:end of romstage 650,307 (12,603)
After:
552:finished loading ChromeOS VPD (RW) 631,832 (15)
3:after RAM initialization 633,002 (1,169)
4:end of romstage 645,582 (12,580)
In ramstage, save_mrc_data() takes ~138 us.
BUG=b:242667207
TEST=MRC caching still works as expected on nivviks - after clearing the
MRC cache, memory is retrained on the next boot, but cached data is used
on subsequent boots.
Change-Id: Ie6aa2dee83a3ab8913830746593935d36a034b8d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add retry up to 10 seconds maximal in ipmi_get_device_id.
Without this retry, on OCP Craterlake with BMC version v2022.28.1,
there's a chance that ipmi_get_device_id failed then ipmi device
won't be enabled.
Change-Id: I2b972c905fb0f8223570212432a4a10bd715f3f7
Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
This function was never called from outside of drivers and
src/drivers/pc80/tpm/tis.c was the only one doing it in a questionable
way.
tpm_vendor_cleanup() also isn't needed as one of tis_close() functions
was its only caller.
Change-Id: I9df76adfc21fca9fa1d1af7c40635ec0684ceb0f
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:259716145
TEST=Verified SSDT on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib57dea9b16e4590ca2d75ac1512fdaf773ec50f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70065
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic64625bdaf8c4e9f8a5c1c22cece7f4070012da7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69903
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 095c931cf12924da9011b47aa64f4a6f11d89f13.
Previously cpu_info() was implemented with a struct on top of an
aligned stack. As FSP changed the stack value cpu_info() could not be
used in FSP context (which PPI is). Now cpu_info() uses GDT segments,
which FSP does not touch so it can be used.
This also exports cpu_infos from cpu.c as it's a convenient way to get
the struct device * for a certain index.
TESTED on aldrvp: FSP-S works and is able to run code on APs.
Change-Id: I3a40156ba275b572d7d1913d8c17c24b4c8f6d78
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69509
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=Verified SSDT on google/osiris.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I647230082362b1093b63793a201eba23a6289121
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70016
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=Build google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I991bc822fbb72cfaa9485abe882950fc7bcef498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70023
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current IPU ES entry value is always set to true for RPL and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
On Raptor Lake silicon, the production binaries are backward
compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:258125833
TEST=Verify the Camera functionality by enabling the IPU secure mode
on RPL variants with both ES/QS silicon.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use correct GUID for DmaProperty in ACPI _DSD.
Reference:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Before:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
After:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
BUG=b:259716145
TEST=Verified the new GUID is reflected in ACPI SSDT at runtime.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I05b8c3bf23cc43863527bc514d9a96096d45003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Marvel PHY it could be necessary to customize the shown LED status
at the connector. The LED status can be changed via Function Control
Register on page 3.
Link to the Marvell PHY 88E1512 datasheet:
https://web.archive.org/web/20221109080111/https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-phys-transceivers-alaska-88e151x-datasheet.pdf
Change-Id: Ia71c43f4286f9201f03cb759252ebb405ab81904
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver enables the usage of an external Marvell PHY 88E1512 which
should be connected to a SOC internal MAC controller. In a first step it
is only the framework of the driver. Functionality will follow with a
second patch.
Change-Id: I24011860caa7bb206770f9779eb34b689293db10
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the logging message prefix to the device name instead of the
device path in order to make the output consistent with other
logging messages in this and other drivers.
Change-Id: Ib63b93d52aad220d17f1f4ee0d47a949933ec26d
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69718
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add ACPI generation callback to the driver after obtaining the
ACPI HID "MCRY3028" for this device from Microcrystal AG (VID: "MCRY").
Also add I2C bus speed field to the device config structure, which
is a required ACPI entry.
BUG=none
TEST=Disassemble the SSDT table and see whether the device entry
"MC28" is generated correctly. Also check whether the RV3028 driver
in Linux (drivers/rtc/rtc-rv-3028.c) is bound correctly after adding
an ACPI match table to it containing the HID. A proper kernel patch
is pending.
Change-Id: I3b8cf5c8dc551439755992ff05b6693e91cc3f21
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Change-Id: I43e6b57477cb4fd2c8ab399e9cc74591b0a44684
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Not all functions that call fsp_print_guid print their output with the
BIOS_SPEW log level, so introduce a new log level parameter so that the
caller of fsp_print_guid can specify which log level fsp_print_guid
should use for printing the GUID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b37afe703f506d4913f95a954368c0eec0f862d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69599
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit b6ebcdfde58a77bea03a67b376401b9f0f3edefb restructured
the DSM implementation which resulted in a regression
and DSM values gets filled with junk values.
This CL fixes this issue and passes the right pointer to the dsm
ids structure.
BUG=b:256938177
TEST=Build, boot Nivviks and check if the DSM values are parsed
correctly in the SSDT dump.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I88782b0b7dde1fca0230472a38628e82dfd9c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69427
Reviewed-by: Haribalaraman Ramasubramanian <haribalaraman.r@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Use the new fsp_hob_iterator_get_next_guid_extension function in
fsp_find_extension_hob_by_guid instead of iterating through the HOB list
in this function.
TEST=AMD_FSP_DMI_HOB is still found and the same type 17 DMI info is
printed on the console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d4ce14c8a5494763de3f65ed049f98a768c40a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Drop the find_resource_hob_by_guid implementation and use the new
fsp_hob_iterator_init and fsp_hob_iterator_get_next_guid_resource
functions in fsp_find_range_hob.
TEST=Mandolin still finds the TSEG range HOB and uses the correct TSEG
location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00786cbeea203fba195ddc953c3242be544a7d70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Introduce iterator function to go through the HOBs that will be used in
follow-up commits both from the rest of the common FSP HOB access code
and from SoC-specific code that needs to access specific HOBs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If86dde2a9f41d0ca7941493a92f11b91a77e2ae0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This disables MP table generation for the affected boards
since interrupt routing entries would now be completely missing.
The mechanism itself is flawed and redundant. The mapping
of integrated PCI devices' INTx pins to IOAPIC pins is
dependent of configuration registers and needs not appear
in the devicetree.cb files at all.
The write_smp_table implementation would skip writing
any entry delivering to destination IOAPIC ID 0. This
does not follow MP table specification.
There were duplicate calls to register_new_ioapic_gsi0(),
with another present under southbridge LPC device.
Change-Id: I383d55ba2bc0800423617215e0bfdfad5136e9ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69488
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fix the following warning:
error: use of logical '&&' with constant operand
[-Werror,-Wconstant-logical-operand]
Change-Id: I9a2f03a0e05088a780ce1e829859421b461032ca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69437
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Since the characters per line limit was increased from 80 to 96, some
line breaks can be removed to improve code readability.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The WCH CH347 presents a USB CDC serial port on interface 4 while in
operating modes 0, 1, and 3. Mode 0 also presents a UART on interface
2 but this is ignored for compatibility with the other modes. Mode 2
uses vendor defined HID usages for communication and is not currently
supported. Like the FT232H the data format is hard coded to 8n1.
Tested using a CH347 breakout board and a Dell Latitude E6400.
Change-Id: Ibd4ad17b7369948003fff7e825b46fe852bc7eb9
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68264
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I8fedea1d566f0c35a9e028d4b2bb939592bd5f74
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There are SoCs (for instance Intel Elkhart Lake) that do use 100 MHz as
the base clock for I2C controllers. To support them properly add a
frequency setting for 100 MHz to the designware I2C controller driver.
Change-Id: I9ea11c6a41fd3758b771a416251e108cbe722769
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
SX9324 driver is updated per Linux's documentation found at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
Supporting logic for the deprecated SX932x driver is hence guarded by
DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
This patch by itself does not introduce functional changes to any board.
The legacy SX932x Linux driver never reached upstream Linux and is only
available in ChromeOS kernel fork of 4.4 and 5.4. Linux later accepted
a different implementation named SX9324 and has been available since
5.4. Ideally all variants should adopt the new driver; however, during
the transition phase, coreboot must support both drivers. It is better
to have a single firmware build that can work with both Linux kernel
drivers by specifying both sets of properties. Legacy driver support
should be deleted once all variants finish migration.
BUG=b:242662878
TEST=Dump ACPI SSDT then verify _DSD entries related to the legacy
SX932x driver are identical w/ and w/o this patch
(Tested on Craask and Nivviks)
Change-Id: I42cd6841c3a270c242ed2e739db245e858eadb3b
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69192
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
These functions are added for ramstage:
* add IPMI OEM command to get board configuration.
* add function to get blade index in the sled.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I85ec7ba68d580c13e368e7d656dba47ea043d33e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68779
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig SOC_RAS_BMS_SEL and corresponding support for
generating PCIe error SEL records and sending them to BMC.
Add PCIe error definitions.
This is needed for SMM, so build the ipmi kcs driver in SMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I1ee46c8da7dbccbe1e2cc00bfe62e5df2f072d65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68758
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No need to call a function that just instantly returns.
It greatly enhances readability to just check before calling a funtion
and it also removes an extra argument.
Change-Id: I4d57c45ede520160ef615725c023b7e92289a995
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is now unused by any platform.
Change-Id: I60afbde6ead70f0c887866fc351b4a6a15a89287
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69120
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all agesa CPUs are removed this code is unused.
Change-Id: If0c082bbdb09457e3876962fa75725add11cb67c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69118
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO. I'm making this an error because we should really clean these up.
BUG=b:210694108
TEST=Boot guybrush and see error:
> I2C: 02:5d: ERROR: Exposing GPIOs in Power Resource and _CRS
> \_SB.I2C1.H05D: Goodix Touchscreen at I2C: 02:5d
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcc42ed81fff295fb168a0b343e96b3a650b1c84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Instead of having callbacks into serial console code to set up the
coreboot table have the coreboot table code call IP specific code to get
serial information. This makes it easier to reuse the information as the
return value can be used in a different context (e.g. when filling in a
FDT).
This also removes boilerplate code to set up lb_console entries by
setting entry based on the type in struct lb_uart.
Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This reverts commit 059902882ce56502124375c9395ebe8b49640710.
A dependency of the previous patch that added the get_ewl_hob function
used by this patch was missing, so this patch needs to be temporary
reverted to revert the patch that breaks the build due to the missing
dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb2fa27e75eede1648ddbf82c8bfbeeb2e9220a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69228
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Add EWL (Enhanced Warning Log) driver which handles Intel EWL HOB
and prints EWL type 3 primarily associated with MRC training failures.
Change-Id: Ibd5b521bafd457505db4147c5d3fe41364a09045
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69145
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also sort includes.
Change-Id: I1727bf56b4090d040aab413006dec7aca0587d44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
- drop ERROR prefix since already provided by cbmem log
- make error text more clear about cause of error
BUG=none
Change-Id: I1795aee240a5383b21108c697e930a2e4972a0b4
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69062
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BMC major/minor revision may be 0. Get the value directly from
BMC without checking to accommodate such situation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I0e08c6d02de8f6efceb69b6d6cebad9d61cfd20e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68685
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Align with BMC on the SEL record format.
Change-Id: Icfcef684caa253663503eadffc819ad2ab65550f
Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68757
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: TangYiwei
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia40678019b2a54deb246dbfbf33ec37a8c3839e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Interrupt Identification Register (IIR) is a I/O read-access register.
Add definition of FIFO enabled for this register so that we can check
whether FIFO is enabled or not.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I12e8566822693004418cf83cae466dc3e2d612c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68566
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards which use an I2C TPM and do not use vboot will not have the
I2C bus initialized/ready at the start of the device init phase.
If TPM init is called before the bus, init will fail with I2C
transfer timeouts and a significantly lengthened boot time.
Resolves: https://ticket.coreboot.org/issues/429
TEST=build/boot google/reef w/o vboot, verify successful TPM init.
Change-Id: Ic47e465db1c06d8b79a1f0a06906843149b6dacd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68550
Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit 672bd9bee5c0045694ef20fe3e2f7a003bef0edd.
Reason for revert: Gmeet resolution dropped. When system starts
Gmeet video call, it uses the hardware accelerated encoder as per
the expectation. But, as soon as another system connects to the call,
the immediate fallback observed from hardware to software encoder.
Due to this, Gmeet resolution dropped from 720p to 180p.
Currently, this issue observed on AlderLake-N SoC based fanless
platforms. This issue is not seen on fan based systems.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alderlake-N systems. With this revert
Gmeet resolution drop not observed.
Change-Id: Idaeaeaed47be44166a7cba9a0a1fac50d2688e50
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
When system_uuid CBFS file is present and contains the UUID
in a string format, the driver will parse it and convert to binary
format to populate the SMBIOS type 1 UUID field.
TEST=Add UUID file and boot MSI PRO Z690-A DDR4 WIFI and check with
dmidecode if the UUID is populated correctly.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I22f22f4e8742716283d2fcaba4894c06cef3a4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64639
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On newer systems such as Alder Lake it has been noticed that Intel PTT
control area is not writable until PTT is switched to ready state. The
EDK2 CRB drivers always initialize the command/response buffer address
and size registers before invoking the TPM command. See STEP 2 in
PtpCrbTpmCommand function in
tianocore/edk2/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
Doing the same in coreboot allowed to perform PTT TPM startup
successfully and measure the components to PCRs in ramstage on an
Alder Lake S platform.
TEST=Enable measured boot and see Intel PTT is started successfully
and no errors occur during PCR extends on MSI PRO Z690-A DDR4 WIFI.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia8e473ecc1a520851d6d48ccad9da35c6f91005d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63957
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This patch adds the functionality to initialize the sc16is750
i2c to uart converter chip with a 14.7MHz input clock to support
115200 baud rate.
Change-Id: Ib31188b8c0f9b0ce9454da984e630eca9101d145
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
De-duplicate common initialization code (self-test and device
identification) and put it in a new ipmi_if.c unit, which is
supposed to work with any underlying IPMI interface.
Change-Id: Ia99da6fb63adb7bf556d3d6f7964b34831be8a2f
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
CB:67670 recently changed the format of the MRC metadata header, but
left the signature the same. That kinda defeats the purpose of having a
signature which is to make a data structure recognizable (because now
the same signature can refer to two different structures that cannot be
otherwise distinguished). While we don't know of any use case where
anything other than coreboot currently parses this data structure (other
than a ChromeOS-internal utility that's about to be removed), it's
probably better to still switch to a different signature for the new
header format just to stay on the safe side (e.g. if we ever need to
start parsing this somewhere else in the future).
CB:67670 only landed a week ago so hopefully the old signature + new
format variant hasn't had much time to escape into the wild yet.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic08b23862720db832a08dc4c6818894492f43cc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68012
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Example for Alder Lake PTT:
Handle 0x004C, DMI type 43, 31 bytes
TPM Device
Vendor ID: INTC
Specification Version: 2.0
Firmware Revision: 600.18
Description: Intel iTPM
Characteristics:
TPM Device characteristics not supported
OEM-specific Information: 0x00000000
TEST=Execute dmidecode and see the type 43 is populated with PTT
on MSI PRO Z690-A WIFI DDR4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I05289f98969bd431017aff1aa77be5806d6f1838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The current IPU ES entry value is always set to true for ADL-N and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
Alderlake-N silicon has the same CPU id for all the SKU's and
also the production binaries are backward compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:248249032
TEST=Verify the Camera functionality by enabling the IPU secure mode
on ADL-N variants with both ES/QS silicon.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I75b222e6f2b1ccdc5b6c448eb60afff3c1da3a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The current MRC cache update process is slow (28 ms on nissa), because
cbmem is not cached in romstage. Specifically, the new MRC data returned
by the FSP is stored in the FSP reserved memory in cbmem, so operations
on the new data (computing the checksum, comparing to the old data) are
slow.
Replace the data checksum in the MRC header with a hash, and compare
hashes instead of comparing the full data. This has two benefits:
1. The xxhash function is faster than computing an IP checksum (4 ms vs
14 ms on uncached data on nissa).
2. There's no need to memcmp() the full MRC data, which takes 14 ms on
nissa.
Before:
550:starting to load ChromeOS VPD 867,930 (4,664)
3:after RAM initialization 896,020 (28,090)
4:end of romstage 906,274 (10,254)
After:
550:starting to load ChromeOS VPD 864,820 (4,649)
3:after RAM initialization 869,652 (4,831)
4:end of romstage 879,909 (10,257)
BUG=b:242667207
TEST=Check that MRC caching still works as expected on nissa. Corrupt
the MRC cache and check that memory is retrained.
Change-Id: I1b7848d1d05e555b61e0f1cb605550dfe3449c6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67670
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create Kconfig options and boot state machine callback in ramstage for
an early initialization of the PTN3460 DP-to-LVDS bridge. This allows
showing the bootsplash screen on mainboards utilizing this chip during
the PCI device enumeration.
BUG=none
TEST=Select PTN3460_EARLY_INIT config switch in mainboard Kconfig and
check the log for "Attempting PTN3460 early init" message. If the
board (e.g. siemens/mc_apl7 in this case) is also configured for
showing the bootsplash logo, it should be now visible.
Change-Id: I5424d062b3fb63c78cfced3971376353be11c504
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67681
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new smbus console driver and Kconfig
options to enable the driver.
Change-Id: Ife77fb2c3e1cc77678a4972701317d50624ceb95
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67339
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using malloc would increase the heap use each time this function is
called. Instead allocate a per struct device buffer inside the
chip_info struct.
Found by coverity scan, CID 1488815.
Change-Id: Ie24870b34338624b3bf3a6f420debdd24a68ffbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64338
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add a property to control the driving of ADCOUT.
BUG=b:234789689
TEST= build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibbedd5838a795ee645a5458b960062c5530ff3b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This reverts commit 510a55d4eeaeb32047c17328ef238b55b89e7296.
Reason for revert: Observed `missing read resource` issue for
cnvi device
BUG=b:244687646
TEST=No error seen in AP log while booting Google/rex
Without this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[ERROR] GENERIC: 0.0 missing read_resources
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
With this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e881313729f1088cffa7c161722ee79bb9acc49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67566
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This reverts commit f83b7d494e3ceb6bec11027ae5f21999ee5ad196.
It turns out we have tests which use `futility validate_rec_mrc` to
validate the MRC cache, which includes verifying the data checksum.
Revert this to allow the tests to pass while we figure out how to fix
this.
BUG=b:245277259, b:242667207
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: Id913d00584444c21cb94668bdc96f4de51af7cee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On some platforms the HFSTS4 bit 19 does not indicate active PTT.
Instead of ME HFSTS4, use TXT FTIF register to check active TPM for
the current boot. Discrete TPM shall be deactivated when PTT is
enabled so this always should return true value of PTT state.
Leave the old method for backwards compatibility if TXT FTIF would not
be applicable for older microarchitectures.
Based on DOC #560297.
TEST=Check if PTT is detected as active on MSI PRO Z690-A DDR4 WIFI
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a55c9f38f5bb94fb1186592446a28e675c1207c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Currently, the "loading FSP-S" timestamp is added in fsp_silicon_init().
However, most Intel platforms actually load FSP-S earlier than this, in
soc_fsp_load(). So the timestamp is added in the wrong place.
Add the timestamp in fsps_load() instead, after the load_done early
return so that it will only be added for the first call.
Before:
949:finished CSE firmware sync 961,833 (17,998)
17:starting LZ4 decompress (ignore for x86) 1,018,328 (56,495)
18:finished LZ4 decompress (ignore for x86) 1,018,797 (469)
30:device enumeration 1,035,096 (16,298)
971:loading FSP-S 1,048,082 (12,986)
954:calling FspSiliconInit 1,049,331 (1,249)
After:
949:finished CSE firmware sync 959,355 (16,370)
971:loading FSP-S 978,139 (18,784)
17:starting LZ4 decompress (ignore for x86) 1,015,796 (37,656)
18:finished LZ4 decompress (ignore for x86) 1,016,271 (475)
30:device enumeration 1,032,567 (16,295)
954:calling FspSiliconInit 1,046,867 (14,300)
BUG=b:239769975
TEST="loading FSP-S" is added in the right place on nivviks (see above).
Change-Id: Ib26cf96ae97766333fe75ae44381d4f7c6cc7b61
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a driver for a new RTC from Micro Crystal. Supported
features are:
* configure backup voltage switchover via devicetree
* configure backup capacitor charging mode via devicetree
* set date if a voltage drop on backup voltage was detected
to either a user definable (devicetree) or coreboot build date
Change-Id: I37176ea726e50e4e74d409488981d7618ecff8bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add multiple fan support for dptf policies
BUG=b:235254828
BRANCH=None
TEST=Built and tested on Redrix system for two fans
Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ic8e04ae043145a3633c0b8379a797724f95fd7ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This workaround was added since reading the firmware version on Ti50
versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is
using Ti50 this old anymore, so remove the workaround.
BUG=b:224650720,b:236911319
TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the
firmware version:
[INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c
Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
When MRC_SAVE_HASH_IN_TPM is selected, mrc_data_valid() uses the TPM
hash to verify the MRC cache data, not the checksum. However, we still
calculate the checksum when updating the cache. Skip this calculation
when MRC_SAVE_HASH_IN_TPM is selected to save boot time.
On nissa, this reduces boot time by ~14 ms:
Before:
3:after RAM initialization 854,298 (28,226)
After:
3:after RAM initialization 849,626 (14,463)
Note, the reason the calculation is so slow is that the new MRC data
lives in CBMEM, which is not yet marked as cacheable in romstage.
BUG=b:242667207
TEST=MRC caching still works as expected on nivviks. After clearing
the MRC cache, memory training happens on the next boot, but doesn't on
subsequent boots.
Change-Id: Ifbb75ecfa17421c0565aec1f3eb48d950244f821
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This patch implements EFI_PEI_MP_SERVICES_PPI structure definitions
with APIs that return mp_api_unsupported().
The reason behind this change is to fix an FSP issue where FSP assumes
ownership of the APs (Application Processors) upon passing a `NULL`
pointer to the CpuMpPpi FSP-S UPD.Hence, this patch implements
`MP_SERVICES_PPI_DEFAULT` config to fill EFI_PEI_MP_SERVICES_PPI with
`mp_api_unsupported` APIs.
Later this data structure can be passed to the CpuMpPpi UPD to avoid
APs from getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
TEST=Able to build and boot Google/Taeko with this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I31fcaa2aa633071b6d6bfa05dbe891ef87978d2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=none
TEST=See "[INFO ] Initialized TPM device TI50 revision 83"
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I3af5f4653b6b8ecd086f85ec573530a4e5c57211
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
earyl ---> early
Change-Id: I06412fd9487aaa1115fdbd86ff44b34db97d97d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Reading firmware_version register is supported on Ti50 version
0.22.4. Therefore correct the help text of the Kconfig option
TI50_FIRMWARE_VERSION_NOT_SUPPORTED.
Also change the message level to BIOS_WARNING.
BUG=b:234533588
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I66a0ef896c9dc4cd0f586555a55dbcd1cfd863f9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66906
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Pronin <apronin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add GPIO configuration and device tree to enable the chip.
BUG=b:240607130
BRANCH=firmware-brya-14505.B
TEST=Patch linux with NXP's pending drivers
UWB device is probed and can respond to a simple hello packet
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I83be712d243c365a5cbfe6f69a6bd85440c5bec7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add MAX98396 support.
BUG=b:232606045
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I835b51ea1fcc9363992d43a625f80cb545802fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move the `offset` parameter into pciexp_find_extended_cap(). If it's
called with `0`, we start a new search. If it's an existing offset,
we continue the search.
This makes it easier to search for multiple occurences of a capa-
bility in a single loop.
Change-Id: I80115372a82523b90460d97f0fd0fa565c3f56cb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
