summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-30{cpu,drivers,nb,sb}/amd: Replace {MSR,MTRR} addresses with macrosElyes HAOUAS
Change-Id: I7e8de35dcdad52bb311b34bfa9b272d17ed3186b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29243 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30drivers/spi: Winbond specific write-protection enablePatrick Rudolph
Extend the SPI interface to enable write-protection. Tested on Cavium EVB CN81xx using W25Q128. Change-Id: Ie3765b013855538eca37bc7800d3f9d5d09b8402 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-29src/drivers/pc80/tpm/tis.c: Dont use port value when invalid.Frans Hendriks
port is allocated in ACPI, without checking for value. Don't use port value when zero. BUG=N/A TEST=Portwell PQ-M107 Change-Id: Ia44281b82d003b29bffbf985b774ddd661b65c4e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/29331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-23{device,drivers}: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: Iebb043a6fbc5803fbb7cad2f35b43917e10d09d4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28700 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-19{cpu,drivers}/amd: Replace MTRR addresses with macrosElyes HAOUAS
Change-Id: I315c0b70c552c5dd7f640b18b913350bb88be81b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29173 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18drivers/intel/fsp*: Use newly added post codes for memory param prepFurquan Shaikh
This change replaces use of post codes 0x34 and 0x36 in fsp drivers to instead use POST_MEM_PREINIT_PREP_{START,END} to make it easy to search from where these post codes are generated during boot flow. Additionally, it adds POST_MEM_PREINIT_PREP_END to fsp2_0 memory_init to make it consistent with fsp1_1 memory init. Change-Id: I307ada1679f212c424e9f7ad2c9d254e24f41fd3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-17drivers/intel/fsp2_0: Add new config option to support FSP CARpraveen hodagatta pranesh
CPU_MICROCODE_CBFS_LEN and CPU_MICROCODE_CBFS_LOC configs pass the CPU microcode length and base address in CBFS to FSPT binary as init parameters. Add new config FSP_T_XIP in Kconfig, which is selected by platform config. If FSP_T_XIP is selected, then relocate FSPT binary while adding it in CBFS so that it can be executed in place. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successfull CAR setup. Change-Id: Ic46e0bb9ee13c38ff322979119c4813653c61029 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-15drivers/net/atl1e: Add driverArthur Heymans
A shortcoming of this driver is that if multiple devices with the same PCI ID are present and don't have an eeprom, they would all get the same macadress set. The r8168 driver deals with such cases so it should be easy to implement if needed. Change-Id: I5c32df00e25453c350a45e7f1ee6834b89c4289f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08smmstore: Add a key/val store facility in flash, mediated through SMMPatrick Georgi
It exposes an interface that is as generic as possible, so payloads and/or kernels can use it for their data. Change-Id: I9553922f9dfa60b9d4b3576973ad4b84d3fe2fb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25182 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06drivers/generic: Add support for providing DSD propertiesFurquan Shaikh
This change adds support in generic device driver to add properties to DSD table. This driver can be used by all generic devices that do not need any special handling other than simply adding device properties to be used by OS. BUG=b:112888584 Change-Id: I0ca6614f1ef322397618676bbf6da898bef18990 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28796 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05drivers/spi/winbond: Add new chipPatrick Rudolph
The W25Q128J is a QSPI flash chip, without ~HOLD and ~WP. Add the device id to make coreboot boot from it. Change-Id: I623fdf7d7e30eb28259bec6294785ad873f1f503 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-01drivers/intel/wifi: Add DID for Intel WIFI module 8260, 8275Subrata Banik
Change-Id: I38d83370e96cff6822a96da5fa3d9af797ba1dc1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-01drivers/spi/winbond: Fix read protection bitsPatrick Rudolph
Don't care about SRPx and print correct protected range. Change-Id: I051f1459c585a7ed6a4878dc217d11df5ef00d74 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-09-16drivers/spi: Read Winbond's flash protection bitsPatrick Rudolph
Extend the generic flash interface to probe for write protected regions. Add Winbond custom code to return flash protection. Tested on Cavium EVB CN81xx using W25Q128. Change-Id: I933a8abdc28174ec32acf323c102d606b58c1ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25082 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16drivers/intel/gma: Fix OpRegion Mailbox3 synchronizationNico Huber
Make XBCM `Serialized` (obvious), and check for the callee clearing the request bit (we checked only the status for 0 which we potentially wrote ourselves). Change-Id: Ic92d525eda8d0a159fa5ddaacf230658d71c1578 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-16acpi: Call acpi_gen_writeSTA by status from device treeHung-Te Lin
The device tree now supports 'hidden' and the status can be found in `struct device.hidden`. A new acpi_device_status() will return the expected setting of STA from a `struct device`. BUG=b:72200466 BRANCH=eve TEST=Builds and boots properly on device eve Change-Id: I6dc62aff63cc3cb950739398a4dcac21836c9766 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28567 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14drivers/intel/gma: Do not rely on CBLV in OpRegion Mailbox3Nico Huber
CBLV is not kept up to date by Linux' i915. We should fix that too, but it will likely take some years until we can always expect it to work. For now read the register values directly. To accomodate that we are not the only one writing those, revise XBQC() to search for the closest value in BRIG (instead of a lower equal one) and round more accurately for better matches. Change-Id: I4e2d8fa34e75463d4cf7242af3e2c67577cfa2a5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-13uart/sifive: make divisor configurablePhilipp Hug
The SiFive UART on the HiFive Unleashed uses the tlclk as input clock which runs at coreclk / 2. The input frequency is configured in the board code depending on the current stage. (bootblock + romstage run at 33.33Mhz, ramstage at 1Ghz) Change-Id: Iaf66723dba3d308f809fde5b05dfc3e43f43bd42 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-10complier.h: add __noreturn and use it in code baseAaron Durbin
Add a __noreturn macro that wraps __attribute__((noreturn)) and replace current users with the macro. Change-Id: Iddd0728cf79678c3d1c1f7e7946c27375a644a7d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-09drivers/vpd: Add VPD supportPatrick Rudolph
VPD reference: https://chromium.googlesource.com/chromiumos/platform/vpd/+/master/README.md Copy ChromeOS VPD driver to add support for VPD without CROMEOS. Possible use case: * Storing calibration data * Storing MAC address * Storing serial * Storing boot options + Now it's possible to define the VPD space by choosing one of the following enums: VPD_ANY, VPD_RW, VPD_RO. + CHROMEOS selects now VPD as part of it. + VPD is implemented as driver. Change-Id: Id9263bd39bf25d024e93daa57053fefcb1adc53a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25046 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-06intel/fsp2_0: Add fsp2.1 shared stack feature supportAamir Bohra
FSP 2.1 implementation is adding features on top of fsp2_0. One such feature is a shared stack implementation that requires coreboot to allocate stack for fspm and then fsp uses the same stack as coreboot. This implementation adds support for shared stack feature. Change-Id: I6581111dbaddfa403eca14100577ccc8a05c4ec7 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/28358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-05mb/lenovo: Support dual graphics for xx20/xx30 ThinkPadsEvgeny Zinoviev
Add CMOS option that allows to use both integrated and discrete GPU. Tested on ThinkPad W530. Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02drivers/intel/fsp1_1: Fix typoWim
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Change-Id: I9c6b063970fa328650de3f4402fe203305b5b760 Reviewed-on: https://review.coreboot.org/28373 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wim Vervoorn Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02src/drivers/spi/tpm: Fix typo & capitalize TPM and IRQElyes HAOUAS
Change-Id: Ifb1e024821153865dd4a27a100f8a9c61151e0e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-30drivers/intel/gma: Fix OpRegion Mailbox3 backlight changeNico Huber
We should always update BCLP, no matter if the driver is ready yet to process the request. This way it will hold the current value when the driver initializes. Change-Id: I4b091d744f95da39abe542966f0a8589a187573b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-30drivers/intel/gma: store uint8_t brightness values in mailbox3Alexander Couzens
The _BCM function requires a percentage value. While the brightness in mailbox3 requires a value in uint8_t. Meaning 255 = 100%. Previous implementation stored the percentage brightness value resulting in limiting the brightness to ~40% of it's maximum power. Only affects brightness control using mailbox3. Fixes: 6838aaebf9ec ("drvs/intel/gma/acpi: Add methods to use MBOX3") Change-Id: I290b5f5b2a8ee406e39e86d3e0de9997798d890d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/28345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-28google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHzKevin Chiu
Bayhub eMMC controller default runs SD base 50MHz at the first power on. After boot into OS, mmc kernel driver will config controller to HS200/208MHz and send MMC CMD21 (tuning block). But Bayhub PCR register 0x3E4[22] (eMMC MODE select) is not clear after system warm reset. So eMMC will still run 208Mhz but there is no block tuning cmd in depthcharge. It will cause two Sandisk eMMC (SDINBDA4-64G-V/SDINBDA4-32G-V) to fail to load kernel and trap in 0x5B error (No bootable kernel found on disk). BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: Ic080682e67323577c7f0ba4ed08f8adafca620cc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28src/drivers/pc80/pc: Remove unneeded includeElyes HAOUAS
Change-Id: Ic238181d5c26ab8cf549137824a7c5e6c6d80ab1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-27drivers/intel/wifi: Make WIFI_SAR_CBFS user visibleFurquan Shaikh
This change makes WIFI_SAR_CBFS user selectable option so that it can be enabled/disabled from menuconfig along with the SAR filepath. BUG=b:112425861 Change-Id: Idf6feaefe68e7ebf6786c2c36e92a054fba4483c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-25Revert "drivers/spi/spi_flash: don't allocate unbounded stack memory"Patrick Georgi
This reverts commit c5ee35ff861fe4447fd80119f645fba7bfd3a184. Reason for revert: breaks boards, uncertain if it _really_ works. Change-Id: I9ba2ba877b9a391306f89295c0c1d0e2d011c5ea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28338 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jean Lucas <jean@4ray.co> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23drivers/spi/spi_flash: don't allocate unbounded stack memoryPatrick Georgi
This open-codes flash_cmd, but until the API is fixed for real, it uses xfer's existing scatter-gather ability to write command and data in one go. BUG=chromium:446201 TEST=emerge-coral coreboot succeeds Change-Id: Ic81b7c9f7e0f2647e59b81d61abd68d36051e578 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-22drivers/elog/elog.c: Create extended eventRichard Spiegel
For debug reasons, sometimes you not only want to log an event, but also some extra information that would help debugging. Create an extended event reporting event type with a dword complement, and define extended events for failing to enter S3 due to pending wake event (one for pm1 and one for gpe0). BUG=b:111100312 TEST=Add a fake pending wake event, build and boot grunt, see the event in eventlog.txt. Change-Id: I3e8df0953db09197d6d8145b0fc1e583379deaa5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-21security/tpm: Fix TPM 1.2 state machine issuesPhilipp Deppenwiese
* Fix ACPI resume path compilation for TPM ramstage driver * Move enabling of the TPM prior activation and remove reboot return status from TPM enable. More information can be found via the TCG specification v1.2 Tested=Elgon Change-Id: Ided110e0c1889b302e29acac6d8d2341f97eb10b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28085 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20drivers/pc80/rtc: do not warn if CMOS options are unavailableStefan Tauner
Callers should have a default ready and get noticed by the return value of get_option(). No need to scare log readers at this location. Change-Id: Ied373d8a02afdc8d1017c9f41d9004e3797dfbb3 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28215 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20src/drivers/usb/Kconfig: increase warning signs for BBB ownersStefan Tauner
The help text is already very clear but some users (first and foremost the author of this patch ;) are still selecting USBDEBUG_DONGLE_BEAGLEBONE when using a BeagleBone Black and waste hours on analyzing the debug output of EHCI debug driver. Change-Id: Ibf002db7d81ed44878f3ce0324170e4b99e780a5 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14src: Remove duplicated 'include <device/device.h>'Elyes HAOUAS
Change-Id: Ia38c6f8d978065090564d449cae11d54ddb96421 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14drivers/i2c/tpm/cr50.c: Check if TPM was readRichard Spiegel
Under some conditions, cr50_i2c_read() can return without actually reading the TPM, which will leave access uninitialized. Set an initial value for access, and if TPM fails to respond in time check if at least TPM was read. This way avoids printing an uninitialized value. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I5ec7a99396db32971dc8485b77158d735ab1d788 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-13driver/spi/stmicro: add 3.3V variant of N25Q032Stefan Tauner
Unfortunately stmicro.c does not distinguish the 1.8V version from the 3.3V versions (yet) although they have distinct RDIDs. I have at least ordered the ID macros accordingly and used a proper name in this patch. Change-Id: Id4fd8d46dcc9e51c1ae5504a32c2f8c5cfd863a1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-12drivers/intel/wifi: Get rid of unused wrdd.aslFurquan Shaikh
This change gets rid of unused wrdd.asl in intel wifi driver. This file became redundant when all boards moved to using SSDT for wifi device. Change-Id: I8b5b3816d77c90e75052c58a3120ab62185873a7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27963 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12drivers/intel/wifi: Skip adding SSDT entry if device is disabledFurquan Shaikh
This change checks to ensure that device is enabled before adding entry into SSDT. BUG=b:112371978 Change-Id: Ibe4811bef8cf0978b7a82d66a32f96247b9c823d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-11drivers/pc80/tpm: add support for SLB9665 TPM2.0 moduleKamil Wcislo
SLB9665 are not initialized correctly. It looks like SLB9665 and SLB9660 return the same DEV ID. Initialize these devices according to TPM Kconfig selections. Tested on apu2 with following change: https://review.coreboot.org/#/c/coreboot/+/28000/ Change-Id: Ic20b9a65ef6a4ee392a9352f7c9bf01b2496f482 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/21983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-08-10src/drivers: Fix typoElyes HAOUAS
Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27916 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09google/grunt: Override BayHub EMMC driving strengthKevin Chiu
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure. It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for this issue. CLK[6:4] CMD,DATA[3:1] original register value: 0x6B enhanced: 0x7F BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27816 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09drivers/spi/spi_flash.c: Check input parameterRichard Spiegel
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and could lead to the return of an invalid (non-initialized) value. Validate the parameter early on. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09drivers/spi/winbond: Improve structure packingPatrick Rudolph
Use bitfields to pack the struct more tightly. Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27815 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04drvs/intel/gma/acpi: Add methods to use MBOX3Patrick Rudolph
* Add Mailbox 3 driver * Request brightness change through Mailbox 3 * Return Ones on error or if unsupported * Mark existing code as legacy (still required if no GMA driver is running) * Call legacy code if Mailbox 3 is unsupported, on error or if gma driver isn't running Tested on Lenovo T430: * Brightness control still works * Brightness is the same on S3 resume Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03security/tpm: Improve TCPA log generationPhilipp Deppenwiese
* Make tcpa_log_init static and move init code into the tcpa_log_add_table_entry routine. * Add more checks for log initialization. * Fix minor issues Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30drivers/i2c/da7219: Allow disabling micbias-pulse featureDaniel Kurtz
These two da7219_aad properties are optional: - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). [<2800>, <2900>] - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) When the Mic Bias Higher Voltage feature is not required, firmware should just not provide the dlg,micbias-pulse-lvl and dlg,micbias-pulse-time properties. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:111700809 TEST=On grunt: No "Invalid micbias pulse level" in dmesg Change-Id: Ie99a8962e78c68b3f6927d0de34168f265d4efa9 Reviewed-on: https://review.coreboot.org/27613 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Akshu Agrawal <akshu.agrawal@amd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-28security/tpm: Add TCPA logging functionalityPhilipp Deppenwiese
* TCG spec only applies to BIOS or UEFI. * Therefore implement coreboot TCPA compliant log in CBMEM. * Write CBMEM log into the coreboot table for CBMEM tool access Change-Id: I0a52494f647d21e2587231af26ed13d62b3a72f5 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25drivers/tpm: Add TPM ramstage driver for devices without vboot.Philipp Deppenwiese
Logic: If vboot is not used and the tpm is not initialized in the romstage makes use of the ramstage driver to initialize the TPM globally without having setup calls in lower SoC level implementations. * Add TPM driver in ramstage chip init which calls the tpm_setup function. * Purge all occurrences of TPM init code and headers. * Only compile TIS drivers into ramstage except for vboot usage. * Remove Google Urara/Rotor TPM support because of missing i2c driver in ramstage. Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24905 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-19drivers/intel/gma: Default to LVDS for Internal on NEHALEMArthur Heymans
Devices using NORTHBRIDGE_INTEL_NEHALEM have an ironlake IGD which does not support eDP, therefore default to LVDS. Change-Id: I669c7793a6f78d72899df21b74b9314ef39a29af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27512 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17security/vboot: Add interface for FSP 2.0 mrc cachingPhilipp Deppenwiese
* Move vboot/tpm specific implementation to vboot. * Only call functions if CONFIG_FSP2_0_USES_TPM_MRC_HASH is set. * Preparation for software hash function support, no logic changed. Change-Id: I41a458186c7981adaf3fea8974adec2ca8668f14 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24904 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13intel/wifi: Add WGDS ACPI method for Geo Aware SARPratik Prajapati
To comply with all relevant bodies throughout the world, SAR settings take into account the lowest common denominator Tx power settings. This setup may lead to non-optimal performance when the user location is in a country that may allow higher power setting. The purpose of Wireless Geo Delta Settings (WGDS) is to provide offset settings for FCC, Europe, Japan and Rest of the world. These offsets would be added (by Intel wifi driver) to the base SAR Tx Power as defined in WRDS and EWRD BUG=b:65155728 BRANCH=none TEST=WGDS ACPI table gets created as expected. Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03drivers/pc80/vga: Fix coding styleElyes HAOUAS
Change-Id: I0452407d1346ca8ead2638e2a31269931ea5d12e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-28drivers/intel/fsp2_0: Fix uncountable "information"Elyes HAOUAS
Change-Id: I91e13a786b12328f1d9200f76788faa19847bbe7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28vboot: Fix linking error with USE_OPTION_TABLE enabledPatrick Rudolph
Fix a linking problem with VBOOT and USE_OPTION_TABLE enabled. Make use of cbfs_locate_file_in_region() and always search the cmos_layout.bin in the 'COREBOOT' region. With this change applied there's no need to include the vboot_locator in SMM any more, we can't break NVRAM with different CMOS layouts, and we keep VBOOT and non VBOOT behaviour the same. Only include cmos_layout.bin and cmos.default in RO region. Add notes explaining the decisions. Tested on Intel Sandybridge, builds and boots with vboot enabled. Change-Id: I10ae94d7936581bbb5ea49384122062bd4934ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27drivers/intel/fsp1_1: Fix vbt_len typeMatt DeVillier
Type of vbt_len should be size_t, change to fix compiler error Change-Id: I22798fa0edb98fcb9acc1b2dd52f34a61bc511e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-24drivers/i2c/alps: Get rid of i2c/alps driverFurquan Shaikh
i2c/alps driver implementation is an exact copy of the i2c/hid driver with only the addition of ALPS0001_HID. This can be supported by the i2c/hid driver using the hid field in devicetree which is what glkrvp mainboard does. So, this change removes the i2c/alps driver which is anyways unused. Change-Id: I60761c384f3d800532b2b346272da7be28b77acd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21drivers/ati/ragexl: Remove dead codeArthur Heymans
Is unused in the tree. Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22132 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-14driver/spi/macronix.c: Add MX25L8005Arthur Heymans
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14AGESA binaryPI: Drop tests for LATE_CBMEM_INITKyösti Mälkki
Change-Id: I4571e8b560559b3d7afe429eca8caa1512e244a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-12drivers/i2c/generic: Ensure config is not NULL before accessing itFurquan Shaikh
This change checks to ensure that config is not NULL before it is accessed for the first time. Reported by: Coverity CID #1393312 Change-Id: Ic248c79783da9c2bfdf3b7f737e5963feff7558c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11{src,util}: Use NULL instead of 0 for pointerElyes HAOUAS
Change-Id: I75fa4577055f25dde0a8b1044c005bba72cabd92 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11drivers/spi: Remove Kconfig prompt from SPI_FLASH_SMMNico Huber
Why would that be a user visible option? Drop the prompt and the `default n` and select it automatically when needed. I hope I caught all its users. TEST=Confirmed that systems with ELOG_GSMI or DEBUG_SMI compile and link. Change-Id: I44aeec530cc333f4ed4c8cfe67c7b5c9d8fb0049 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Treat all stages commonly when adding driversNico Huber
Clean it up and add all flash chip drivers to postcar stage thereby. There seem to be SPI controllers that don't need the individual flash chip drivers. For those postcar support was added in b6b1b23 (console/flashconsole: Enable support for postcar). However for SPI controllers that need the individual drivers (i.e. those with CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y), linking of the postcar stage was broken. For all other stages, the set of compilation units stays the same. Change-Id: Ib8bdb824bfcf2d31ac696e39f797c4355b765756 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11drivers/spi: Remove DEBUG_SMI guardNico Huber
Let the linker take care of it. Change-Id: I67d2636ceb042f833c1b44888b98135d728940e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-08arch/x86: Drop leftover ROMCC console supportKyösti Mälkki
Change-Id: I3e52569a34e1f7bfea8be9da91348c364ab705e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-08libgfxinit: Enable G45 support (for GM45/X4X)Nico Huber
Change-Id: Ia637d32ffaa5d280320955d34141eddc8b7df981 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22222 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06src/driver/i2c/{generic,hid,tpm,max}: Update device name based on devicetree.cbNaresh G Solanki
Name i2c device structure based on that in devicetree.cb Now log looks like: I2C: 01:0a (WCOM Touchscreen) I2C: 03:13 (Realtek RT5663) I2C: 03:39 (SSM4567 Right Speaker Amp) I2C: 03:3a (SSM4567 Left Speaker Amp) BUG=None BRANCH=None TEST=Build & boot Soraka Change-Id: I5dbb66ab705cd8601b8b1dc94bc6ee9f181b7be2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-04src/drivers: Get rid of whitespace before tabElyes HAOUAS
Change-Id: Ia9ca055679c0332613afb2bb2ed86df165de3baf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ib2bb6cc80ac2bdc389c60c7ffac4bba937f0fca8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04drivers/generic/ioapic/ioapic.c: Remove unneeded includeElyes HAOUAS
Change-Id: I670702f092e49bac8d7733d6fa77861e28e09093 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-01drivers/intel/wifi: Add PCI ID for Intel TP2 Wi-FiFurquan Shaikh
This change adds PCI ID for Intel TP2 Wi-Fi and adds that to pci_device_ids in Intel wifi driver. Change-Id: I51abf615fca6001d564e7cd672cc16f3a0fb8dd6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-31i210: Add additional PCI-ID to the i210 driverWerner Zeh
When the i210 MACPHY is operated in the SERDES Backplane mode (which depends on the programmed firmware image), its PCI-ID will be 0x1537. This does however not change the programming interface for the MAC address. Therefore add this new PCI-ID to the driver so that the MAC address can be programmed in this operation mode as well. Change-Id: I608535202c49e40690381c2b2ab26322d62cfb37 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/26683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-31{cpu,drivers,nb,soc}/intel: Use CACHE_ROM_BASE where appropriateNico Huber
Change-Id: Ibc2392cd2a00fde3e15dda4d44c8b6874d7ac8a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
As far as I can see this Kconfig option was used wrong ever since it was added. According to the commit message of 107f72e (Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary to prevent overlapping with CAR. Let's handle the potential overlap in C macros instead and get rid of that option. Currently, it was only used by most FSP1.0 boards, and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?). Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-28drivers/i2c/max98373: update DT property namesSathyanarayana Nujella
Upstream Kernel side codec driver expect DT properties to have 'maxim' prefix. Update accordingly while filling SSDT entries. BUG=b:79362472 TEST=dump DT properties in kerenl side and cross checked TEST=Audio playback works with this change Change-Id: Iaa4b14492dbb5a0087242f1485493f3192336f60 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-25elog: Only log POST code from previous boot on non-S3 resumeDaniel Kurtz
It doesn't make sense to log post codes from a previous (failed) boot if we are resuming from S3, since the previous boot has to have been successful in order to enter S3 in the first place. While we are at it, use a helper function to combine conditionals and improve readability. BUG=none TEST=boot, suspend & resume grunt Change-Id: I4f3bb8526a0c8c0ea1efd924628b33c147543b88 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26528 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Only print TYPE_BOOT on S3-resume if CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Previously, we were unconditionally adding a TYPE_BOOT message to the ELOG on every boot (even S3 resume) if CONFIG_ELOG_BOOT_COUNT was disabled. Now that boot_count_read() returns 0 for the !CONFIG_ELOG_BOOT_COUNT case, the code becomes a bit simpler. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I803fa4c3e03b6cc94751cf0ce34b78021ae2124e Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26527 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25drivers/intel/fsp2_0: Make use of xmalloc for FSP-S UPDSubrata Banik
Don't allocate FSP-S UPD over stack. This patch reduces stack usage for Cannonlake platform. TEST=On CNL platform stack usage reduces from ~3.6KiB to ~1KiB. Change-Id: I07ef0db6720d7e6865ac1641ce2661009332907c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26501 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>