| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Iac4f275c14646b40ffe04fc5a6f6e1402cebfddf
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11464
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The #error messages only say that "CONFIG_* must be defined", which
conveys no more information that the compiler or assembler failing
when it encounters an undefined CONFIG_* symbol.
Change-Id: I6058474d4cd454cfc20290650425d379f388abd9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Avoid ASSERT() when a better solution exists, avoid UPPERCASE types
when C99 types exist, and use stdlib functions where possible.
Change-Id: Ia40ec8ff34ec82994b687d517dc4b145fb58716c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11455
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We don't need the code in romstage, and it saves us a few #ifdefs.
Change-Id: I26d867566f07c7d80890cd01bf055be7497130d3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For some reason fsp 1.1 has a duplicate mechanism for saving
mrc data as soc/intel/common. Defer to the common code as all
the existing users were already using the common code.
BUG=chrome-os-partner:44620
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I951d47deb85445a5f010d23dfd11abb0b6f65e5e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Original-Commit-Id: 2138b6ff1517c440d24f72a5f399bd6cb6097274
Original-Change-Id: I06609c1435b06b1365b1762f83cfcba532eb8c7a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295236
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11454
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Using struct prog and struct region_device allows for the
caller to be none-the-wiser about where FSP gets placed. It
also allows for the source location to be abstracted away
such that it doesn't require a large mapping up front to
do the relocation. Lastly, it allows for simplifying the
intel/commmon FSP support in that it can pass around a
struct prog.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30
Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290830
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c
Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Reviewed-on: http://review.coreboot.org/11193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There was no implementation for uart_fill_lb() in the 8250mem
driver. Rectify this so when 8250MEM and CONSOLE_SERIAL are
employed then the build doesn't fail.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Built with glados using 8250MEM
Original-Change-Id: I35d6b15e47989c1854ddcee9c6d46711edffaf3e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289899
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I972b069a4def666f509268816de91ed6c0f655d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11169
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Run `indent -linux src/drivers/pc80/i8254.c` and manually put the `;` in
the while loop back on a separate line.
Change-Id: I58c4c5df3846a91ef92aafb608962dc26a21f811
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10452
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds UART8250MEM_32 feature flag to support
UART8250 compatible with 32bit access in memory mapped mode.
[pg: rebuilt to reuse the existing UART8250 8bit access driver
which reduces code duplication.]
Change-Id: I310e70dfab81dcca575e9931e0ccf93af70efa40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0c3b2c628b854e8334540ff5158c2587dbfabf95
Original-Change-Id: I07ee256f25e48480372af9a9255bf487c331e51d
Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271759
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10998
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For hex and int type kconfig symbols, IS_ENABLED() doesn't work. Instead
check to make sure they're defined and not zero. In some cases, zero
might be a valid value, but it didn't look like zero was valid in these
cases.
Change-Id: Ib51fb31b3babffbf25ed3ae4ed11a2dc9a4be709
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10886
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Makefile.inc to use the simplified CBFS image type.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Ibb8413ab90b147e9d26d32639a8822c57ca54a46
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The many different places to put vboot support in can be confusing.
Instead of using libverstage (which isn't enough since those functions are
sometimes called outside that, too), mention all stages where it can resides
explicitly.
Change-Id: Idddb9f5e2ef7bcc273f429d9f432bd37b4573567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10728
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
That way it's available wherever the verstage code ends up, bootblock,
verstage or romstage.
Change-Id: I0665e297f199acd60cff93e1b39812f183115d33
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10707
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Because of a misunderstanding of how Kconfig files are parsed, the
OVERRIDE_MRC_CACHE_LOC symbol was added to make sure that the value
was correctly set. This is not needed unless for some reason the
Kconfig parser is suddenly rewritten to parse everything differently.
At some point, the value in the FSP's Kconfig file was updated to
OVERRIDE_CACHE_CACHE_LOC, while the entries in the mainboard
Kconfig files were not updated. This resulted in the default values
not getting set correctly by default on the FSP Bay Trail boards.
This removes the whole bunch of incorrect and unnecessary symbols and
just sets the default for the MRC cache location directly.
Change-Id: I1cec758576866b7e0677272b8309bfde8d4a1ee4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10611
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Move the 'Intel FSP' Kconfig comment inside the 'if' block so that it
doesn't show up on platforms that aren't using it.
- Update the comment to reflect that this is version 1.1 of the FSP
interface.
Change-Id: I7182c5b07332c4f95620f7374526ab1de0484d01
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10650
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Use 3rdparty/blobs subdirectory for binary files
Display the MTRRs after TempRamExit and before the MTRR setup
Clear all of the variable MTRRs before the MTRR setup
Define the FSP attributes location and bits
Properly display the FSP_RESERVED_MEMORY_RESOURCE_HOB and the
FSP_BOOTLOADER_TOLUM_HOB.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: I788a5f1e7676b1a06c1bcd66ddbd0a2249cad47c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's derived from EEPROM on Lenovo machines and not from user config
which is ignored.
Change-Id: I54fb76a3160e47cd36d33d2937c4bfaddcd36a69
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7055
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
It can be helpful to certain users of the cbmem init hooks
to know if recovery was done or not. Therefore, add this
as a parameter to the hooks.
Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
All other Kconfig locations start with tabs.
Change-Id: I0ee5f0b0b82f85c8ae58b3626f142f159554efb3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10438
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: Idcd059f05523916f726b94931c2487ab028b7d72
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10409
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Change-Id: Ieb6f70f5b2863336bd6143b2dfbb1d67c4c26109
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10323
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This should be an internal selectable variable rather than user-visible config.
Moreover the description is misleading.
This is a typical case of an option "Should it work?" where there is only one
right answer yet we still ask it.
Change-Id: Idc0ce2e1b9f89eddd034966cc877483d994ce0eb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10378
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch provides support for TPM Infineon SLB9670 by adding its
device ID to the list.
BRANCH=None
BUG=chrome-os-partner:40640
TEST=Built and test SLB9670 on SKL U Reference board Fab 2
Change-Id: I2d26fc6c7d074881f2e6189e1325808544b7d26d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c92884be75b631c302801e162292c245ed7bf5d
Original-Change-Id: I4607fc96f70175b2461b40ba61e7a821e187de40
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/274053
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch provides support for TPM Infineon TT1.2
devices by enumerating the TT1.2 ID in the Infineon
device list.
BRANCH=None
BUG=None
TEST=Built for sklrvp and tested on RVP3.
Change-Id: I9daecc09311477fd9947e829d80abc040b2c9e3d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3ff86f96cb3e2f203dbc86e7004f1a037b98b90a
Original-Change-Id: I8b59eba348fc44632e22600646eb0b10eb2f4901
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271256
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/10302
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
Current TPM driver does not support multiple devices for
a given vendor. As the device object never takes the 2nd
ID in the list. This patch fixes the same.
BRANCH=None
BUG=None
TEST=Built for sklrvp and tested on RVP3.
Change-Id: I82c3267c6c74b22650fc53dc6abdc2eb3daa138e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ff42613f11b4f1a79e907601f1ecb7b83a3aeaab
Original-Change-Id: Ieb44735c37208bfe90a8e22e0348dd41c8c642d2
Original-Signed-off-by: Subrata <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271727
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Commit-Queue: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Reviewed-on: http://review.coreboot.org/10303
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
Change-Id: I534f992ed479c7cdc049bd598259b1f1cf2953b9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10354
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Old igd.asl had inconsistent addresses (between _DOD and actual device)
and ghost devices. Any of those is enough to make brightness on windows
fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous
copying of the same thing 6 times per chipset. Leave only hooking up and
chipset-specific part in chipset directory. Move NVS handling and ACPI-spec
parts to a common file.
Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7472
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10322
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Just not exporting TPM isn't good enough as it can still be accessed.
You need to send it a deactivate command.
Change-Id: I3eb84660949c2d1e2b492d541e01d4ba78037630
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10270
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This code is not specific to ChromeOS and is useful outside of it.
Like with small modifications it can be used to disable TPM altogether.
Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10269
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of being pointer based use the region infrastrucutre.
Additionally, this removes the need for arch-specific compilation
paths. The users of the new API can use the region APIs to memory
map or read the region provided by the new fmap API.
Change-Id: Ie36e9ff9cb554234ec394b921f029eeed6845aee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
TPM_TIS_BASE_ADDRESS is technical setting, shouldn't be user-visible.
Change-Id: Ibf74f52be16fb7d2cfa78419087a4c3e7607368a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10271
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
Update the FSP driver files from 1.0 to 1.1.
Updates will occur manually to these files only for FSP 1.1 support. An
fsp_x_y should be added in the future to support newer versions of the
FSP specification.
Please note that due to the interface with EDK2, these files make
references to data structures and fields that use CamelCase.
BRANCH=none
BUG=None
TEST=Build for Braswell or Skylake boards using FSP 1.1.
Change-Id: I2914c047d786a3060075356783ac9758bc41f633
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10049
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I8df5b7f6707957b925f7bb4dc06a717252c70868
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10275
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
|
|
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
0x20 was incorrectly represented as 4 * 5 while in fact it's 4 * 8
Change-Id: I6053a3baa6de0da9f1d648009353bc1fe542f81f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10237
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not
disabled by GIC CPU interface. This is done by adding a bypass override
capability when the interrupts are disabled at the CPU interface. To
support this, there are four bits about IRQ/FIQ BypassDisable in CPU
interface Control Register. So the CPU can exit from WFI when an
asserted IRQ is coming. This is critical for power gating a CPU.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=testing with CPU idle with power down state support and CPU can
wake up normally
Change-Id: I71ac642e28024a562db898665b74a5791fce325a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a3f098cbf3fbfdab8150ebd4fd688fdb472b529
Original-Change-Id: I20569a18f34a4b11b8c8c67ea255b3d0f021839f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269116
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10172
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is based on commit f2b3cd63
(lenovo/x60: Support digitizer on X60t and X201t)
Tested on Thinkpad X200 Tablet (7450): all pen functionallity
works (i.e. movements, presure sensitivity and buttons)
Change-Id: I9bd18642a6ea4211dc3be065456a507fc0b72561
Signed-off-by: Alex David <opdecirkel@gmail.com>
Reviewed-on: http://review.coreboot.org/10208
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Inclusion of ricoh driver was lost in 1d7b9de3504e90f0886fccec3a1f8a783fd4cc58.
So the relevant code wasn't even compiled.
Fix copy-paste mistakes without significance while on it as well.
Change-Id: Ie548cb43f986f147658fc9c67963f8a055250598
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
verstage previously lacked serial console support.
Add the necessary objects and macro checks to allow
verstage to include the serial console.
Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Add FSP 1.0 source for comparison with FSP 1.1.
BRANCH=none
BUG=None
TEST=None
Change-Id: I8df349f97acfa74f4de3607d49633da3d4884546
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Tested with gizmosphere/gizmo1 Explorer add-on board, which
exposes the following device:
0x0403 Future Technology Devices International, Ltd
0x6014 FT232H Single HS USB-UART/FIFO IC
For now UART is hard-coded to 115200, 8n1, no flow-control.
Change-Id: I4081f84f7700751ccbf079e7fcbb1467aa71d872
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10063
Tested-by: build bot (Jenkins)
|
|
secmon is referring to uart's default_baudrate() and
various coreboot version strings.
Change-Id: I40a8d1979146058409a814d94ea24de83ee4d634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows the backlight control register to be set via devicetree.cb
Change-Id: I32b42dfc1cc609fb6f8995c6158c85be67633770
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9330
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id1685c0b28ec8e3ab972a671af6f2de6f321c645
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9805
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The 'A' indicates the production process(64 nm). All other chips from
the same family leave this out.
TEST=Build and booted on Minnowboard Max
Change-Id: I21e6c01de5d547bbc2252e679a001948e7ab752c
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'.op_erase' was not specified for this chip. Set it to sub sector
erase(CMD_M25PXX_SSE). Adjust page/sector size for sub sector erase
to work.
TEST=Untested, due to lack of hardware.
Change-Id: Icc2748fbd3afeb56693e1c17d97eb490fba67064
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10077
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
N25Q064 is similar to N25Q128.
TEST=Build and booted twice on Minnowboard Max
Change-Id: Iec105f8b81f619846cf40b40042cc59150b81149
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10076
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
What is described by the comment has already been fixed in f0d038f4
(flash: use two bytes of device ID to identify stmicro chips).
This also means that STM_ID_N25Q128 doesn't have to be at the top of
stmicro_spi_flash_table anymore.
TEST=Untested, due to lack of hardware
Change-Id: I7a9e9a0cdfdb1cf34e914e186fc6957c1d9b5ca6
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The log message says 'page size' while actually the sector size is
printed. This is confusing since for stmicro page size != sector size.
Also add '0x' prefix to numbers to make it clear they are in hex.
TEST=Build and booted on Minnowboard Max
Change-Id: I795a4b7c1bc8de2538a87fd4ba56f5a78d9ca2ac
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix up commit c13ad6c6 (driver/intel/fsp: Correct the fastboot data (MRC
data) printing length) unintentionally making the changed files
executable.
Change-Id: I909c323023a9ccfb0c20094d9085ae90043b9e04
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10060
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
The build system includes a bunch of files into verstage that
also exist in romstage - generic drivers etc.
These create link time conflicts when trying to link both the
verstage copy and romstage copy together in a combined configuration,
so separate "stage" parts (that allow things to run) from "library" parts
(that contain the vboot specifics).
Change-Id: Ieed910fcd642693e5e89e55f3e6801887d94462f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I0024c4d56f93eb6c9a54103e79c9d8a8b7d8d6fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10043
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
trivial whitespace fixes. Mostly changing leading spaces to tabs.
Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Consolidate the FspNotify calls into the FSP driver directory,
using BOOT_STATE_INIT_ENTRY to set up the call times.
Change-Id: I184ab234ebb9dcdeb8eece1537c12d03f227c25e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/9780
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Remove Kconfig files that are no longer used:
src/vencorcode/Kconfig
src/soc/marvell/Kconfig
- Fix the drivers/sil/Kconfig to point to drivers/sil/3114 which had
the same code.
- Make sure all Kconfig files have linefeeds at the end. This can cause
problems, although it wasn't in this case.
- Include cpu/intel/model_65x/Kconfig which was not being included.
Change-Id: Ia57a1e0433e302fa9be557525dc966cae57059c9
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/9998
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The offset of 0x2000 was for a configuration with two separate OxPCIe
chips. The setup we support is a single chip with 8 UART pors.
Change-Id: If4be046a14464af7b90b86aca5464c6b3400dffc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8780
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fastboot data in Intel FSP project is printed by hexdump32() in dword
length. So the data length needs to be divided by 4 when printing it.
Change-Id: I959d538bd6e60282882dd138045cc730b4bd8159
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/9976
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific
directory. See follow-on patches for sharing of common code.
Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/9970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It became necessary to indicate the beginning of the normal boot
process. This patch adds a new pattern, a slow (over 2 seconds) fade
in into the 0, 87, 155 color.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=tested by the next patch.
Change-Id: Idd977688e5aa2cc55fc295072c0766526ae95016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 577c8bd6f8c69073cfdd7acd4a87e7ae603d48e6
Original-Change-Id: I9aff3f4558e733ff2e47206075533556e400f183
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265535
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9922
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
After testing on a final assembly the PD team adjusted the wipeout
request and recovery request modes' colors.
BRANCH=storm
BUG=none
TEST=verified new colors while booting an SP5 device in recovery mode
Change-Id: I9bd2dac63b99140573533c2cda8eaa9213478ab1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41c34a619dc0317af67907f18ee844c71a73d623
Original-Change-Id: Iab84710ebdeed35ddd4a8a163bbb6b8ac9cdb799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262602
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Modify colors as suggested by product review folks. This is not final,
to make it easier to identify RGB locations in the hex dumps, express
their values in decimal as opposed to hex.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified new all three color schemes while pressing the recovery
button at boot for 20 seconds.
Change-Id: I7461acd7004e3d10cba6665a9bfe25ec8aa6f3ba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a075824a1954eb5d1b65ce887304924724a6d21
Original-Change-Id: I7f5968e361333572fd1f84aa11b7150194ad902a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261690
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The originally loaded blinking program was written to allow gradual
change in LED brightness, which required controlling each LED with its
own engine. In fact there is no need in gradual brightness changes
when the firmware is controlling the ring. This allows to control all
LEDs by one engine, making the code simpler and more robust (no need
to synchronize the three engines any more).
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified that recovery boot WW ring patterns work as expected.
Change-Id: I89d231fb61693f4e834d8d9323ae5a7ddd149525
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 19809cf8120df8865da9b5b9e7b8e932334bf4b5
Original-Change-Id: I41038fd976dc9600f223dc0e9c9602331baf68f9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9873
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The two controllers on the ring are programmed independently, and if
the second controller is running the old pattern while the first one
was loaded with a new pattern, there is a window of when the two
unrelated patterns might interact.
To avoid this shut down execution on both controllers before starting
downloading the new pattern code.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=verified recovery/wipeout LED ring behavior did not change.
Change-Id: I163f2983d414fe839208054ae3e9025663a46aeb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3502ca6b119c033855b45388e7b782d35cfdd82b
Original-Change-Id: I0f71f94a7e82f6c0e7f98d3aad1f93ece207248f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add compiled lp55231 code snippets to allow display certain patterns
when booting the device with the recovery button pressed.
As soon as the press is detected, the low intensify solid white
pattern is enabled. Holding recovery button long enough causes the
device transition between the wipeout requested and recovery requested
states, with the appropriate changes in the displayed pattern.
The patch also includes the source code for the LED controller as well
as instructions on how to compile and modify the code to result in
different colors, intensities, blink periods and duty cycles.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=reboot an SP5 device with the LED ring attached, keep the
recovery button pressed, observe the changes in the LED display
pattern while the device progresses through the boot sequence.
Change-Id: Ic7d45fc7c313b6d21119d4ae6adaeb4f46f7d181
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0fd6a5c0067d705197816629f41640a931d2f7cd
Original-Change-Id: Ib5cc5188c2eeedbba128101bf4092a0b9a74e155
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260670
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9870
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The patterns displayed on the LED ring while under the coreboot
control are not driven by the vboot, but by the board code instead,
The four distinct states of the LED display are:
- all off
- recovery button push detected, waiting for it to be released
- wipeout request pending - recovery button was pushed long enough
to trigger this request
- recovery request pending - recovery button was pushed long enough
to trigger this request.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=no functional changes
Change-Id: I38d9a3028013b902a7a67ccd4eb1c5d533bf071c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bdfff0e646283da6a2faaacf33e0179d2fea221c
Original-Change-Id: Ie279151b6060a2888268a2e9a0d4dc22ecaba460
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260649
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9868
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When in development environment, some SP5 devices might not have the
LED ring attached. They are still fully functional, but when booting
up are generating massive amount of i2c error messages. This patch
prevents accesses to non-existing lp55321 devices.
When loading the program into the device the vendor recommends 1 ms
delay when accessing the program control register. This patch
separates these accesses into a function and add a delay after every
access.
Another fix - advance the program address when loading multipage
programs.
Set the global variable register 3c, not used by coreboot programs, to
a fixed value. This will allow depthcharge to avoid re-initializing
the controller when not necessary.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=booted firmware on an SP5 with no LED ring attached, no excessive
error messages are generated, saw the default pattern displayed
when the recovery button is pressed during reset.
Change-Id: I6a2a27968684c40dae15317540a16405b1419e30
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e0b4c84aca27460db594da1faf627ddee56f399
Original-Change-Id: I10f1f53cefb866d11ecf76ea48f74131d8b0ce77
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260648
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a copy of the depthcharge ww ring driver implementation ported
into coreboot. The main differences are:
- direct use of the i2c driver instead of using the callback driver
description
- no dynamic memory allocation for the controller structures
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applied the LED ring gets
initialized to the default pattern at coreboot start.
Change-Id: I6902c8b76fc173ad2ec28b8cc94695e892df338a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eda24b78f8aff311dd6296d458bdfecf26c3d65a
Original-Change-Id: I5660dc3f255aab8fbe3a87041c72916a645c193b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257730
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When RTC is not selected, return all 0.
Change-Id: I892a9489fc1d82fb8e61cf02666f797dc6412e05
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9955
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
RTC drivers now select RTC, so that code which depends on them
can implement fallback behavior for systems that lack the
hardware or driver.
Change-Id: I0f5a15d643b0c45c511f1151a98e071b4155fb5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Disable and enable GIC before switching off a CPU and after bringing
it up back respectively.
BUG=None
BRANCH=None
TEST=Compiles successfully and psci commands work for ryu.
Change-Id: Ib43af60e994e3d072e897a59595775d0b2dcef83
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5271d731f0a569583c2b32ef6726dadbfa846d3
Original-Change-Id: I672945fcb0ff416008a1aad5ed625cfa91bb9cbd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265623
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9926
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
These Kconfig options provided a level of configurability that is
almost never necessary, so they are being moved into ordinary
preprocessor defines in elog_internal.h. The new threshold to
trigger shrinking is relative to the number of additional
(maximum-size) events that can fit, and the new target
post-shrink size is a percentage of the total ELOG area size.
BUG=chromium:467820
TEST=Add loop at the end of elog_init() that fills the ELOG area
to just below full_threshold with dummy events. Observe
successful shrinkage when the next event is logged.
BRANCH=None
Change-Id: I414c4955a2d819d112ae4f0c7d3571576f732336
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce439361e3954a2bf5186292f96936329171cf56
Original-Change-Id: I926097f86262888dcdd47d73fba474bb2e19856a
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260501
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9869
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes quite a bit of code duplication between cpu_to_le32()
and clrsetbits_le32() style macros on the different architectures. This
also syncs those macros back up to the new write32(a, v) style IO
accessor macros that are now used on ARM and ARM64.
CQ-DEPEND=CL:254862
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu,
Storm and Urara. Booted on Jerry. Tried to compare binary images...
unfortunately something about the new macro notation makes the compiler
evaluate it more efficiently (not recalculating the address between the
read and the write), so this was of limited value.
Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b
Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254866
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a manual cleanup of all the rubble left by coccinelle
waltzing through our code base. It's generally not very good with line
breaks and sometimes even eats comments, so this patch is my best
attempt at putting it all back together.
Also finally remove those hated writel()-style macros from the headers.
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d
Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254865
Reviewed-on: http://review.coreboot.org/9837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to src/:
@@
expression A, V;
@@
- writel(V, A)
+ write32(A, V)
@@
expression A, V;
@@
- writew(V, A)
+ write16(A, V)
@@
expression A, V;
@@
- writeb(V, A)
+ write8(A, V)
@@
expression A;
@@
- readl(A)
+ read32(A)
@@
expression A;
@@
- readb(A)
+ read8(A)
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6
Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254864
Reviewed-on: http://review.coreboot.org/9836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:
@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)
This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.
BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
stmicro flash chips use 2 bytes as a device id: upper byte for memory
type and lower byte for capacity. with this change, we will use all 2
bytes to identify a chip.
BUG=none
BRANCH=broadcom-firmware
TEST=booted purin and verified n25q256a was identified.
Change-Id: I8f382eddc4fa70d3deceb4f9d2e82026a7025629
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f70a1d4b7e1142afec9ce097c4a21b6225f66e
Original-Change-Id: Id3378a77318fabb74ddb30f1a9549010636872ba
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199387
Original-Reviewed-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/251305
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Bootblock does not allow using malloc, use statically allocated chip
structures instead.
BRANCH=storm
BUG=chrome-os-partner:33489
TEST=both drivers compile when configured in, also booted whirlwind
with an STM compatible SPI NOR flash.
Change-Id: I154c33ce5fc278d594205d8b8e62a56edb4e177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eedbb959a595e0898e7a1dd551fc7c517a02f370
Original-Change-Id: I29b37107ac1d58a293f531f59ee76b3d8c4b3e7c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some SOCs (like pistachio, for instance) provide an 8250 compatible
UART, which has the same register layout, but mapped to a bus of a
different width.
Instead of adding a new driver for these controllers, it is better to
have coreboot report UART register width to libpayload, and have it
adjust the offsets accordingly when accessing the UART.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the rest of the patches integrated depthcharge console messages
show up when running on the FPGA board
Change-Id: I30b742146069450941164afb04641b967a214d6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42
Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240027
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9738
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The AS3277 RTC code seems to closely follow the corresponding Linux
driver. Unfortunately, while coreboot (and even other parts of Linux,
like mktime()) directly follows the standard IBM PC RTC time
representation (except for the BCD part), Linux' struct rtc_time decided
to use 0-based (instead of 1-based) months instead.
This patch removes the faulty month offset that was copied into our
driver so that we will generate correct timestamps again.
BRANCH=nyan
BUG=chrome-os-partner:34108
TEST=firmware_EventLog (pre-release version) gets further than before
(and then craps up on unrelated problems with suspend/resume events).
Change-Id: Ica221a8bcfd7c1c6cd7ba382d760b586d511e3a3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b55c3f5bbecc776a71338256b910aecccac1e04
Original-Change-Id: I163fa4778ec534cd9e6f92a6b6dc55e9871a6a82
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238122
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9723
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ia8ddd689a3bf09ed68f94907ea19d4d2ee874542
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9594
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI
read and write transactions. Limiting transfer size in the wrapper
allows to provide the API user with unlimited transfer size
transactions.
The tranfer size limitation is added to the spi_slave structure, which
is set up by the controller driver. The value of zero in this field
means 'unlimited transfer size'. It will work with existion drivers,
as they all either keep structures in the bss segment, or initialize
them to all zeros.
This patch addresses the problem for reads only, as coreboot is not
expected to require to write long chunks into SPI devices.
BRANCH=none
BUG=chrome-os-partner:32441, chrome-os-partner:31438
TEST=set transfer size limit to artificially low value (4K) and
observed proper operation on both Pistachio and ipq8086: both
Storm and Urara booted through romstage and ramstage.
Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45
Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232239
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As per the TCG PC Client TPM Interface Specification v1.2, bit 7 of the
access register (tmpRegValiSts bit) stays "0" until the TPM has complete
through self test and initialization. This bit is set "1" to indicate that
the other bits in the register are valid.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:35328
TEST=Booted up storm p0.2 and whirwind sp3.
Verified TPM chip is detected and reported in coreboot logs.
Change-Id: I1049139fc155bfd2e1f29e3b8a7b9d2da6360857
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 006fc93c6308d6f3fa220f00708708aa62cc676c
Original-Change-Id: I9df3388ee1ef6e4a9d200d99aea1838963747ecf
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242222
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9567
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
CL:243671 moved the initialization of elog_initialized around, which is
now unfortunately so late that the ELOG_TYPE_BOOT event gets omitted
because the code believes the log to be broken at that time. Good thing
we now have a FAFT test for these things that I had of course been too
lazy to run. -.-
The real reason for moving that line was to put it after any point in
elog_init() that could still error out. The problem is that we might add
the "cleared" event before we try to shrink (which can fail and cause an
error)... but those two things cannot happen at the same time, so it
should be okay to flip them around and mark the elog as initialized in
between.
BRANCH=none
BUG=chrome-os-partner:35940
TEST=Ran firmware_EventLog on a Pinky, manually confirmed that I once
again get "System boot" events.
Change-Id: I12dcf4a8e47d302f6cd317194912c31db502bbaf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4a1c0b861017ca25229b1042c4b37dda33e869f9
Original-Change-Id: I4103779790e1a8a53ecabffd4316724035928ce6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246715
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9503
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The elog driver has a really stupid bug that checks a result which is
stored in an unsigned variable for < 0. Surprisingly GCC does not catch
this nonsense right now, and I spent an hour trying out different
warning options without finding one that doesn't also bring a load of
stupid and unavoidable false positives (the biggest offender being
-Wtype-limits, which does exactly what we'd want except for flagging
things like if ((u8)var >= CONFIG_VAR_MIN) where the VAR_MIN Kconfig may
or may not be 0).
So, the only thing we can do is fix this one and wait for the next time
something like that blows up. -.- Also change some more code to make the
behavior more explicit (the old code already intended to work this way
since flash_base is statically initialized to 0, never assigned in the
error path and checked later in elog_init()... but there was an error
message that incorrectly claimed a different fallback behavior, and
explicitly assigning the values makes this easier to see). Finally, add
another state to the elog_initialized variable to avoid trying to
reinitialize a broken eventlog on every event (if it doesn't work the
first time, chances are that it won't work later on during the same boot
either).
BRANCH=None
BUG=chrome-os-partner:35940
TEST=Flashed Jerry with RO 6588.4 and RW 6588.23, observed how it now
cleanly enters recovery mode without blowing its bootblock away with
stray eventlog entries.
Change-Id: I0e5348ba961ce4835c30f7108a2453522095f2ee
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f9798dbf0c2b2e337062ecd84d0f45434343c0d9
Original-Change-Id: I4d93f48d2d01d75a04550d419e023aa42ca95a7a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/243671
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9557
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The TPM driver by default allocates a 4K transfer buffer on the stack,
which leads to lots of fun on boards with 2K or 3K stack sizes. On
RK3288 this ends up writing over random memory sections which dependent
on the memlayout of the day might contain timestamp data (no big deal)
or page tables (-> bad time).
This patch fixes the problem by reducing the buffer size to slightly
above 1K, which still seems to work as far as I can tell. There was
already some really odd code that #undef'ed this value and redefined it
with the lower number in one .c file (unfortunately not the one with the
buffer declaration), with no explanation whatsoever... I'm removing that
and just assume the smaller value will be fine for everything.
BRANCH=veyron
BUG=None
TEST=Booted Pinky and Falco.
Change-Id: I440a5662b41cbd8b7becab3113262e1140b7f763
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3d3288041b6629b7623b9d58816e782e72836b81
Original-Change-Id: Idf80f44cbfb9617c56b64a5c88ebedf7fcb4ec71
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236976
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9481
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is being triggered because the base address is added, but
there is nothing that needs done with it in set_resources step
and the ERROR message is tripping suspend resume test scripts.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=boot on samus and check for ERROR strings,
successfully run suspend_stress_test without failures
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231603
(cherry picked from commit bb789492965d92e309a913dc7b9f09f7036c5480)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I565c8af954f1c5a406d2c65f01c274e9259e43ec
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9062734d884f814dc880589ee615b4d7e1fdc61a
Original-Change-Id: I2b5f44795f1ee445d509b29bd56f498aea7b7fe3
Original-Reviewed-on: https://chromium-review.googlesource.com/231604
Original-Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9476
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This adds a ramstage driver for the TPM and allows the interrupt
to be configured in devicetree.cb.
The interrupt vector is set like other PNP devices, and the
interrupt polarity is set with a register configuration variable.
These values are written into locality 0 TPM_INT_VECTOR and
TPM_INT_ENABLE and then all interrupts are disabled so they are
not used in firmware but can be enabled by the OS.
It also adds an ACPI device for the TPM which will configure the
reported interrupt based on what has been written into the TPM
during ramstage. The _STA method returns enabled if CONFIG_LPC_TPM
is enabled, and the _CRS method will only report an interrupt if one
has been set in the TPM itself.
The TPM memory address is added by the driver and declared in the
ACPI code. In order to access it in ACPI a Kconfig entry is added for
the default TPM TIS 1.2 base address. Note that IO address 0x2e is
required to be declared in ACPI for the kernel driver to probe correctly.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=manual testing on samus:
1) Add TPM device in devicetree.cb with configured interrupt and
ensure that it is functional in the OS.
2) Test with active high and active low, edge triggered and level
triggered setups.
3) Ensure that with no device added to devicetree.cb that the TPM
is still functional in polling mode.
Change-Id: Iee2a1832394dfe32f3ea3700753b8ecc443c7fbf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fc2c106caae939467fb07f3a0207adee71dda48e
Original-Change-Id: Id8a5a251f193c71ab2209f85fb470120a3b6a80d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226661
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9469
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This moves the LPC TPM driver to drivers/pc80/tpm so it can
be turned into a ramstage driver with a chip.h
It includes no other changes yet.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=emerge-samus coreboot
Change-Id: Iac83e52db96201f37a0086eae9df244f8b8d48d9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: be2db391f9da80b8b75137af0fe81dc4724bc9d1
Original-Change-Id: I60ddd1d2a3e72bcf169a0b44e0c7ebcb87f4617d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226660
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9468
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The TPS65913 PMIC has an RTC built into it. This change adds
a driver for it which implements the new RTC API.
BUG=chrome-os-partner:33764
BRANCH=None
TEST=Compiles and boots to kernel prompt on ryu. Timestamps for event log
verified across multiple boots.
Change-Id: I49ec9b78afc53f1cbd4be09e448cdae6077fb710
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c16c11e620c830e7a73a2a24fe4823ccea0f3c39
Original-Change-Id: If1d549ea2361d0de6be75fd24b9e9810a6df7457
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229414
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9425
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Iaef9d4755f07ca03ca823831c3272183b5d6aed1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7c3db3d5c8e00b6c273ae240da137062597749aa
Original-Change-Id: I5e38966fe06aa3302a7c1b536f5ffd8bb22d4947
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229413
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9450
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
