| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/smm.h>' -- src/) <(git grep -l 'SMM_DEFAULT_BASE\|SMM_DEFAULT_SIZE\|SMM_BASE\|SMM_ENTRY_OFFSET\|SMM_SAVE_STATE_BEGIN\|APM_CNT\|APM_STS\|apm_control\|set_smm_gnvs_ptr\|set_acpi_mode_on_exit\|io_trap_handler\|southbridge_io_trap_handler\|mainboard_io_trap_handler\|southbridge_smi_set_eos\|smm_southbridge_clear_state\|global_smi_enable\|global_smi_enable_no_pwrbtn\|cpu_smi_handler\|northbridge_smi_handler\|southbridge_smi_handler\|mainboard_smi_gpi\|mainboard_smi_apmc\|mainboard_smi_sleep\|smramc_dev\|smramc_reg\|run_smm_relocate\|smm_is_really_enabled\|is_smm_enabled\|smram_open\|smram_close\|smram_lock\|smm_open\|smm_close\|smm_lock\|_binary_smm_start\|_binary_smm_end\|smm_runtime\|smm_module_params\|smm_handler_start\|smm_get_save_state\|smm_handler_t\|smm_loader_params\|smm_setup_relocation_handler\|smm_load_module\|backup_default_smm_area\|restore_default_smm_area\|smm_region\|SMM_SUBREGION_HANDLER\|SMM_SUBREGION_CACHE\|SMM_SUBREGION_CHIPSET\|SMM_SUBREGION_NUM\|smm_subregion\|smm_list_regions' -- src/)|grep '<'
Change-Id: Id96ddad974a1460a6e6580cee1e45c863761af06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a
hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move
it out of the `if GFX_GMA` block to break this unwanted dependency.
TEST=Build for Librem 13v4 with no graphics init successfully.
Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The previous DPTF patch train missed the proper scope operator around
all of the TSR options. Without this, the optional GTSH and/or _STR
Methods end up in the wrong scope.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the initial DPTF refactor, the scope of the TCPU device was
incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the
way that the acpi_inject_dsdt() callback currently works (it injects
contents before the dsdt.aml file), the Scope where the TCPU
device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing
games with *when* things are defined in the DSDT, switch to defining all
of the DPTF devices in the SSDT.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a new driver for AMD I2S machine device. Currently,
this device is added as part of `acp_fill_ssdt()` in Picasso, but with
addition of this driver, this device can be added just like any other
device in the devicetree.
BUG=b:157708581
Change-Id: I49d1a867d7941397acca1054632b6ad855a021de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/tsc.h>' -- src/) <(git grep -l 'TSC_SYNC\|tsc_struct\|rdtsc\|tsc_t\|multiply_to_tsc\|rdtscll\|tsc_to_uint64\|tsc_freq_mhz\|tsc_constant_rate' -- src/)|grep '<'
Change-Id: Id090e232a96323adb8d9a24b81f7ae5669248f57
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42393
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: I1ca111a30153526c3915bf393208fb2b4c569c01
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43347
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>. This is needed for 'u64'.
Change-Id: Ie99c27bd6a7d982bba9a93342f3e3b83a1c09e8d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Files found using:
diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<'
Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch converts the current DPTF policies from static ASL files into
the new SSDT-based DPTF implementation. All settings are intended to be
copied exactly.
Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We only want to return an ACPI name for a USB port if the controller
physically has the port. This has the desired side effect of making the
usb_acpi driver skip generating an ACPI node for a device which has
no port. This prevents writing an invalid SSDT table which the OS then
complains about.
BUG=b:154756391, b:158096224
TEST=Boot picasso trembyle and verify HS05, HS06 and SS05 are no longer
generated. Also checked the logs and saw the devices being ignored.
\_SB.PCI0.LPCB.EC0.CREC.TUN0: Cros EC I2C Tunnel at GENERIC: 0.0
\_SB.PCI0.LPCB.EC0.CREC.MSTH: Cros EC I2C Tunnel at GENERIC: 1.0
\_SB.PCI0.LPCB.EC0.CREC.ECA0: Cros EC audio codec at GENERIC: 0.0
\_SB.PCI0.PBRA.XHC0.RHUB.HS01: Left Type-C Port at USB2 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.HS02: Left Type-A Port at USB2 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.HS03: Right Type-A Port at USB2 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.HS04: Right Type-C Port at USB2 port 3
xhci_acpi_name: USB2 port 4 does not exist on xHC PCI: 03:00.3
xhci_acpi_name: USB2 port 5 does not exist on xHC PCI: 03:00.3
\_SB.PCI0.PBRA.XHC0.RHUB.SS01: Left Type-C Port at USB3 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.SS02: Left Type-A Port at USB3 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.SS03: Right Type-A Port at USB3 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.SS04: Right Type-C Port at USB3 port 3
xhci_acpi_name: USB3 port 4 does not exist on xHC PCI: 03:00.3
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia645380bea74f39fd94e2f9cbca3fcd4d18a878e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes some boilerplate code.
BUG=b:154756391
TEST=Dump ACPI table for trembyle and verify it didn't change.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idcda4356f4e6cb7f6066c67e8fabe0299a1a75b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43353
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to use ugly preprocessor here when regular C conditional
statements will work just fine.
Change-Id: I5abd445a335b43fb95e4df087d44e82c3f44349b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Code has evolved such that there seems to be little
use for global definition of cbmem_top_chipset().
Even for AMD we had three different implementations.
Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nothing selects this driver. Drop it before it grows moss.
Change-Id: I4d0e678a8725c1fdf9263b9fae4e4fb6bb5ab4de
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43268
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:154756391
TEST=Dump ACPI table and see xHCI nodes being created.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1541dc8ebf314a204708a7767f30f4db72990907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43331
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We can use xhci_for_each_ext_cap to inspect the xHC so we generate the
correct number of device nodes.
Scope (\_SB.PCI0.PBRA)
{
Device (XHC1)
{
Name (_ADR, 0x0000000000000004) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x1F,
0x03
})
Device (RHUB)
{
Name (_ADR, Zero) // _ADR: Address
Device (HS01)
{
Name (_ADR, 0x01) // _ADR: Address
}
Device (HS02)
{
Name (_ADR, 0x02) // _ADR: Address
}
Device (SS01)
{
Name (_ADR, 0x03) // _ADR: Address
}
}
Name (_S0W, Zero) // _S0W: S0 Device Wake State
Name (_S3W, 0x04) // _S3W: S3 Device Wake State
Name (_S4W, 0x04) // _S4W: S4 Device Wake State
}
}
BUG=b:154756391
TEST=Boot trembyle and look at ACPI table. See all xHCI nodes.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44ebaef342e45923bc181ceebef882358d33f0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41900
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nothing selects this driver. Drop it before it grows moss.
Change-Id: I9311dd07b8259384badec65da649fa0cf2da1e01
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43267
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nothing selects this driver. Drop it before it grows moss.
Change-Id: I7f06ea45f90d502053c52ea0b7cd7aa6d52295c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43266
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I27e4d66a1c8e2ed0eb5152f6bd56cc3fec2dea8e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
Nothing is selecting this driver. Drop it before it grows moss.
Change-Id: I9e2ba205154a9b37455c522721f5eb2ef9d76b40
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Iebd9080cd0e859dce5e6c5398429c38d1aa075dc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Iff5007256fedebd98082a575773d7de181b321ab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I5bafcda2f8958e1ea4467749b40802deebe1cd3a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
\_SB.DPTF.IDSP adverties to the DPTF daemon which policies the
implementation supports. Added a new acpigen function to figure out
which policies are used, and fills out IDSP appropriately.
Change-Id: Idf67a23bf38de4481c02f98ffb27afb8ca2d1b7b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
DPTF has several options on how to control the fan (fine-grained speed
control, minimum speed change in percentage points, and whether or not
the DPTF device should notify the Fan if it detects low speed).
Individual TSRs can also set GTSH, which is the amount of hysteresis
inherent in the measurement, either from circuitry (if analog), or in
firmware (if digital).
BUG=b:143539650
TEST=compiles
Change-Id: I42d789d877da28c163e394d7de5fb1ff339264eb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for emitting the PPCC table, which describes
the ranges available as knobs for DPTF to tune. It can support min/max
power, min/max time window for averaging, and the minimum adjustment size
(granularity or step size) of each power limit. The current implementation
only supports PL1 and PL2.
BUG=b:143539650
TEST=compiles
Change-Id: I67e80d661ea5bb79980ef285eca40c9a4b0f1849
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for generating the _FPS table for the DPTF Fan
object. The table describes different levels of fan activity that may be
applied to the system in order to actively cool it. The information
includes fan speed at a (rough) percentage level, fan speed in RPM,
potential noise level in centibels, and power in mA.
BUG=b:143539650
TEST=compiles
Change-Id: I5591eb527f496d0c4c613352d2a87625d47d9273
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change generates the DPTF TCHG.PPSS table in the SSDT. This table
describes different charging rates which are available to use. DPTF
can pick different rates in order to passively cool (or not) the
system.
BUG=b:143539650
TEST=compiles
Change-Id: I6df6bfbac628fa4e4d313e38b8e6c53fce70a7f2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds support for DPTF Critical Policies, which are consist
of Method definitions only. They are `_CRT` and `_HOT`, which are
defined as temperature thresholds that, when exceeded, will execute a
graceful suspend or a graceful shutdown, respectively.
BUG=b:143539650
TEST=compiles
Change-Id: I711ecdcf17ae8f6e653f33069201da4515ace85e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch adds support for emitting the Thermal Relationship Table, as
well as _PSV Methods, which together form the basis for DPTF Passive
Policies.
BUG=b:143539650
TEST=compiles
Change-Id: I82e1c9022999b0a2a733aa6cd9c98a850e6f5408
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support for generating the different pieces of DPTF
Active Policies. This includes the Active Relationship Table, in
addition to _ACx methods.
BUG=b:143539650
TEST=compiles
Change-Id: Iea0ccbd96f88d0f3a8f2c77a7d0f3a284e5ee463
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
In this DPTF implementation, the participant device objects are written
into the DSDT with only minimal Names attached (_HID/_ADR, _STA, _UID,
PTYP, and _STR). All other Methods & Names will be written into the
SSDT. If a device is not used in any policy, then its _STA is set to
return 0 ("off").
BUG=b:143539650
TEST=Compiles.
Change-Id: Ief69a57adce9ee0b19056ce6a11ed8a5b51b3f87
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change adds support function to parse entries in the devicetree to
generate PowerResource entries for the MIPI camera.
Change-Id: I31e198b50acf2c64035aff9cb054fbe3602dd83e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41624
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to handle CIO2 device type.
Change-Id: I521740524bc1c4da3d8593f011a033542e4a872c
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42470
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to add PLD section to SSDT.
Change-Id: If65b9cbabca95e9645d8e5023ce7fd78b0625d1e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42469
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to add DSM section to SSDT.
Change-Id: Ic60e972b6aebad171a7b77fe0d99781693adfb20
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42468
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates mipi_camera driver to handle camera sensor.
Change-Id: I581c9bf9b87eac69e88ec11724c3b26ee5fa9431
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42467
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support in mipi_camera driver to handle NVM and VCM
device types.
Change-Id: I24cb7f010d89bc8d14e0b4c8fe693ba6e9c68941
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42466
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the mipi_camera driver to handle acpi_name based on
device_type, if acpi_name is not set in the devicetree and moves some of
the common code to separate methods.
Change-Id: I15979f345fb823df2560db269e902a1ea650b69e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41607
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As the booting the system can be delayed for a noticeable amount of
time, often 60 seconds is the default, this is not a debug message.
Chose log level BIOS_INFO.
Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Change-Id: I7015d4bf6f536c5cea8e1174db81f09f756ae0e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Michael Niewöhner
|
|
Fix integer with different size to pointer conversion on x86_64.
Change-Id: Ic06a32d549b694310f4c724246f28fed15acf83f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42983
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For historical reasons, Windows has issues with certain names being
used for files and directories, 'con' or 'CON' being one of
them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in
order to work around this issue.
TEST=built volteer (only user of this driver as of now)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
It implements the SMBIOS IPMI FRU mapping table defined in
https://www.opencompute.org/documents/facebook-xeon-motherboard-v31
22.3 SMBIOS FRU mapping table.
Mainboard needs to configure the correct values for FRU_DEVICE_ID and BMC_KCS_BASE.
For type 11 string 1 to 6 are common and implemented in this driver, the
rest are project dependent and can be added in the mainboard code.
Tested on OCP Tioga Pass.
Change-Id: I08c958dfad83216cd12545760a19d205efc2515b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40308
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new LB_TAG_PLATFORM_BLOB_VERSION for FSP version, it would
add Intel FSP version to coreboot table LB_TAG_PLATFORM_BLOB_VERSION
when PLATFORM_USES_FSP2_0 is selected.
Tested=On OCP Delta Lake, with an updated LinuxBoot payload cbmem utility
can see "LB_TAG_PLATFORM_BLOB_VERSION": "2.1-0.0.1.120"
Change-Id: I92a13ca91b9f66a7517cfd6784f3f692ff34e765
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Replace uses with MAINBOARD_HAS_LPC_TPM, if drivers/pc80/tpm
is present in devicetree.cb it is necessary to always include
the driver in the build.
Change-Id: I9ab921ab70f7b527a52fbf5f775aa063d9a706ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
It's necessary to run IPMI commands in romstage for writing error SEL
such as memory initialization error SEL, and also for other usages
such as starting FRB2 timer, OEM commands, etc.
Add CONFIG_BMC_KCS_BASE for BMC KCS port address that can be used
across romstage and ramstage.
Change-Id: Ie3198965670454b123e570f9056673fdf515f52b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40234
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie64b267ac01afa9774105e1ab8a7c18021726ff3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41871
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per ACPI spec, GpioIo does not have any polarity associated with
it. Linux kernel uses `active_low` argument within GPIO _DSD property
to allow BIOS to indicate if the corresponding GPIO should be treated
as active low. Thus, if GPIO has active high polarity or if it does
not have any polarity associated with it, then the `active_low`
argument is supposed to be set to 0.
Having a `polarity` field in acpi_gpio seems confusing because GPIOs
might not always have polarity associated with them. Example, in case
of DMIC-select GPIO where 0 means select DMIC0 and 1 means select
DMIC1, there is no polarity associated with the GPIO. Thus, it would
be clearer for mainboard to use macros without having to specify a
particular polarity. In order to enable mainboards to provide GPIO
information without polarity for GpioIo usage, this change also adds
`ACPI_GPIO_OUTPUT` and `ACPI_GPIO_INPUT` macros.
BUG=b:157603026
Change-Id: I39d2a6ac8f149a74afeb915812fece86c9b9ad93
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Proposal for gpio_regulator usage in ACPI never got accepted upstream
for Linux kernel. So, the gpio_regulator driver in coreboot remains
unused. This change drops this unused driver.
Change-Id: Ia1e0ae4f955b9ffc8346d957f755499419d8cbc7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Coverity detects dereferencing pointers that might be "NULL" when
calling acpigen_write_scope and acpigen_write_device. Add sanity
check for both of scope and name to prevent NULL pointer dereference.
Found-by: Coverity CID 1429979, 1429982
TEST=Built and boot up to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: If17d12861f562dc0d6c98a5c91a9d3c0360ca2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42835
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on OCP Tioga Pass
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ib05fdb34b2b324b6eb766de15727668ce91d2844
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40522
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change allows mainboard to configure different wakeup routes that
can be used by a GPIO key:
1. SCI: This is selected when SCI route is used to wake the system. It
results in _PRW property being exposed in ACPI tables.
2. GPIO IRQ: This is selected when GPIO controller wake is used to
wake the system. It is typically used when the input signal is not
dual routed and the GPIO controller block is not capable of applying
filters for IRQ and wake separately. In this case, _PRW is not exposed
in ACPI tables for the key device.
3. Disabled: No wakeup supported.
Based on these wakeup routes, gpio_keys_add_child_node() is updated to
expose _PRW and _DSD properties for wakeup appropriately.
Additionally, the change updates mainboards that were already using
gpio_keys to set wakeup_route attribute correctly and renames "wake"
to "wake_gpe" to make the usage clear.
BUG=b:159942427
Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Not all FSPs based on FSP 2.1 supports the feature of external PPI
interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE.
Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is
selected.
Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake).
Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Implemented according to IPMI "Platform Management FRU Information
Storage Definition" specification v1.0 for reading FRU data Chassis
Info Area.
Tested on OCP Tioga Pass.
Change-Id: Ieb53c20f8eb4b7720bf1fe349e6aaebaa4c37247
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40306
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on OCP Tioga Pass.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I1da8abaa682af802e5cda65e5021069daf4ee717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
This change will add these files to verstage only if the verstage
architecture is X86 - either 32 or 64 bit.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I797b67394825172bd44ad1ee693a0c509289486b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Having speparate types for the status register with three and four block
protection bits respectively doesn't really make sense, it's the same
size either way just a different representation, so one union type will
do.
This allows us to de-duplicate the status register read in
winbond_get_write_protection as well as removing another layer of union
in 'struct status_regs'.
Change-Id: Ie99b98fb6762c8d84d685b110cfc2fd5458b702e
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42111
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SPI_WRITE_PROTECTION_REBOOT seems to be a Winbond thing, other vendors
such as Macronix only support permanent protection but conditional on
the WP# pin state.
Change-Id: Iba7c1229c82c86e1303d74c7bc8f89662b5bb58c
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41747
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused includes.
Change-Id: I91dd92b54822dd0d10051ccd600ce787860c8ff6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The former is not standard C, and we primarily use the latter form.
Change-Id: Ia7091b494ff72588fb6910710fd72165693c1ac5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Change-Id: Idfb89ceabac6b6906e31a3dbe9096d48ba680599
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Kconfig 4.17 started using the $(..) syntax for environment variable
expansion while we want to keep expansion to the build system.
Older Kconfig versions (like ours) simply drop the escapes, not
changing the behavior.
While we could let Kconfig expand some of the variables, that only
splits the handling in two places, making debugging harder and
potentially messing with reproducible builds (e.g. when paths end up
in configs), so escape them all.
Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
Header was moved outside arch/.
Change-Id: Id96c2bdcee49cddab6610c7e2cd6f07638279256
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the introduced functions and verify pointers in the SMMSTORE.
Make sure to not overwrite or leak data from SMM and update the
documentation as well.
Change-Id: I70df08657c3fa0f98917742d8e1a6cb1077e3758
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41085
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
As a generalization, remove all-y for CONFIG_ARCH_xx guarded
makefiles.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia7dcfed699ee1c0cd5a5250431c5f05bf6d8b9c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
• Based on FSP EAS v2.1 – Backward compatibility is retained.
• Add multi-phase silicon initialization to increase the modularity of the
FspSiliconInit() API.
• Add FspMultiPhaseSiInit() API
• FSP_INFO_HEADER changes
o Added FspMultiPhaseSiInitEntryOffset
• Add FSPS_ARCH_UPD
o Added EnableMultiPhaseSiliconInit, bootloaders designed for
FSP 2.0/2.1 can disable the FspMultiPhaseSiInit() API and
continue to use FspSiliconInit() without change.
FSP 2.2 Specification:
https://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html
Change-Id: If7177a267f3a9b4cbb60a639f1c737b9a3341913
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41728
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, configuring and reviewing DPTF parameters is difficult
because DPTF tables and methods are defined in static ASL files, and are
littered with #ifdefs which both define parameters and influence
behavior (e.g., whether a method is included or not). This patch train
is an effort to bring DPTF support to our ACPI DSDT/SSDT generation
framework.
This first patch is very minimal, and includes only creation of the
DPTF device (in the DSDT).
BUG=b:143539650
TEST=compiles (later tests get more comprehensive).
Change-Id: I14df9f422c911677aeea25552ac1822a9462c58a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41883
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the check for NvsBufferPtr in S3 resume case to
happen just before FSP-M is called. This allows SoC/mainboard code to
set NvsBufferPtr if it doesn't use the default MRC cache driver.
BUG=b:155990176
Change-Id: Ia272573ad7117a0cb851f0bfe6a4c7989bc64cde
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Not strictly required for binaryPI boards, but do this for
consistency.
Change-Id: Id0bbbfb6f695c4bb920bc57a1e9362a23884efb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Only Winbond parts seem to support making status register writes
volatile. So this flag should not be exposed in the generic interface.
Change-Id: Idadb65ffaff0dd7809b18c53086a466122b37c12
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41746
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When MRC cached data update is performed, messages are written to
event log, which is flash based. For system that does not have flash
based event log, the messages are lost.
Added corresponding BIOS_DEBUG messages.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I1ef4794151fea7213c8317ddc898b0e37da280b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41981
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3f08b9cc34582165785063580b3356135030f63e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
|
|
Change-Id: I1632d03a7a73de3e3d3a83bf447480b0513873e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41685
Reviewed-by: David Guckian
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver generates an ACPI device object for a UART attached device
with all of the expected device support handlers like different interrupt
sources and power control GPIOs.
Example use:
chip drivers/uart/acpi
register "name" = ""UDEV""
register "desc" = ""UART Attached Device""
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "compat_string" = ""google,cros-ec-uart""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_C20)"
register "uart" = "ACPI_UART_RAW_DEVICE(115200, 64)"
device generic 0 on end
end
Resulting in this ACPI device:
Device (UDEV)
{
Name (_HID, "PRP0001")
Name (_UID, Zero)
Name (_DDN, "UART Attached Device")
Method (_STA, 0, NotSerialized)
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate ()
{
UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.PCI0.UAR2",
0x00, ResourceConsumer, , Exclusive)
GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer)
{
0x0114
}
})
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x01)
{
Package (0x02)
{
"compatible",
"google,cros-ec-uart"
}
}
})
}
Change-Id: Idfd2d9d2ab6990a82ddd401734c0d9b1b0b8f82d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If the device is missing the HID, the code would previously leave an
open scope and device on the stack.
BUG=b:154756391
TEST=Verify stack ACPI stack does not exceed limit on Trembyle.
Fixes: a1c82c5ebee ("drivers/generic/max98357a: Allow custom _HID from config")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I798ed08ef0a0575def12937a66a7ce99f743e60d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Now that there is a generic solution in mtrr subsystem utilize
the API.
BUG=b:155426691,b:155322763
Change-Id: Ie349d5669808928c7470c99d25c57c784174b4e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41850
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cbfs.h>' -- src/) <(git grep -l 'cbfs_boot_map_optionrom\|cbfs_boot_map_optionrom_revision\|cbfs_boot_locate\|cbfs_boot_map_with_leak\|cbfs_locate_file_in_region\|cbfs_boot_load_file\|cbfs_load_and_decompress\|cbfs_prog_stage_load\|cbfs_boot_region_device' -- src/) |grep '<' |grep -v vendorcode
Also add missing 'include <cbfs.h>' in src/soc/qualcomm/sc7180/qupv3_config.c
Change-Id: Icaecb5b910888f34cddedab7b2f64eaf6d01ad66
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41682
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change is based on the concept that system user's (overwrite)
settings are held in VPD_RW region, while system owner's (default)
settings are held in VPD_RO region.
Add VPD_RW_THEN_RO region type, so that VPD_RW region is searched
first to get overwrite setting, otherwise VPD_RO region is searched
to get default setting.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Icd7cbd9c3fb2a6b02fc417ad45d7d22ca6795457
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Rename VPD_ANY to VPD_RO_THEN_RW, to reflect the VPD region search
preference. Update all existing code references for VPD_ANY.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I960688d1f6ab199768107ab73b8a7400a3fdf473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41586
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ChromeOS EC is adding new entries to its USBC.CONx devices (see later
patch), and it needs to get access to the PMC.MUX device so that its
ACPI path can be retrieved. This provides a weak function to return NULL
for all Intel SoCs except for Tiger Lake, which locates the device if it
is found in the devicetree.
Change-Id: I3fe3ef25e9fac8748142f5b1bd870c9bc70b97ff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40948
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow the ability for chipset or mainboard to choose to
compress FSP-M in cbfs using LZMA or LZ4 routines. However, only
non-XIP platforms will support FSP-M compression. Since the main
cbfs decompression paths are utilized add the appropriate checks
for including compression algorithms under the FSP-M compression
options.
On picasso FSP-M (debug builds) the following savings were measured:
no-compression:
fspm.bin 720896 none
FSP_COMPRESS_FSP_M_LZ4:
fspm.bin 138379 LZ4 (720896 decompressed) -80%
FSP_COMPRESS_FSP_M_LZMA:
fspm.bin 98921 LZMA (720896 decompressed) -86%
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I5c88510c134b56a36ff1cd97a64b51ab2fea0ab0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Allow the ability for chipset or mainboard to choose to
compress FSP-S in cbfs using LZMA or LZ4 routines. To accomplish
this fsp_load_component() is added as an assist for performing
the necessary logic and allow the caller to provide the destination
selection. Since the main cbfs decompression paths are utilized add
the appropriate checks for including compression algorithms under
the FSP-S compression options.
On picasso FSP-S (debug builds) the following savings were measured:
no-compression:
fsps.bin 327680 none
FSP_COMPRESS_FSP_S_LZ4:
fsps.bin 98339 LZ4 (327680 decompressed) -70%
FSP_COMPRESS_FSP_S_LZMA:
fsps.bin 71275 LZMA (327680 decompressed) -78%
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I8aa5d8c1cbaf4d08f38a918a9031a2570bc5247e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CB:34634 expanded the VPD code to also be usable from romstage,
shuffling a few things around and adding some extra infrastructure in
the process. Unfortunately, the changes seem to have only been written
with x86 devices in mind and make coreboot always load the whole VPD
FMAP section (not just the used part) on devices where rdev_mmap() is
not a no-op.
This patch rewrites the VPD code to be based on region_device structures
that only represent the VPD area actually used (rather than the whole
FMAP section), and that only get mapped when accessed. (It would be even
better to pull this concept into the VPD decoder itself, but since that
is taken from third-party code and accesses in early stages aren't very
common, let's not go there for now.) It also moves the copying into
CBMEM to romstage so that late romstage accesses can already benefit
from it, and makes early decoding available in all stages because at
this point, why not.
Also fix a long-standing bug where the 'consumed' counter was not reset
between vpd_decode_string() calls to the RO and the RW VPD.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I55a103180b290c1563e35a25496188b6a82e49ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This feature is only available if properly hooked up to an
smihandler.
Change-Id: I99baef07b0623f9a6b41e8b8e000a89589c298d0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41730
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It never was in GNVS, it never belonged among the ACPI tables. Having
it in CBMEM, makes it easy to look the location up on resume, and saves
us additional boilerplate.
TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and
intel_backlight + acpi_video synchronize, both before and
after suspend.
Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Tiger Lake PMC device has a MUX device which is expected to be
exposed in ACPI tables. The MUX device simply has a _HID and _DDN.
The CON devices link the USB-2 and USB-3 port numbers (from SoC
point of view) to the physical connector. They also have orientation
options for the sideband (SBU) and USB High Speed signals (HSL),
meaning that they can be fixed (i.e, another device besides the SoC
controls the orientation, and effectively the SoC is following only
CC1 or CC2 orientation), or they can follow the CC lines.
BUG=b:151646486
TEST=Tested with next patch in series (see TEST line there)
Change-Id: I8b5f275907601960410459aa669e257b80ff3dc2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Some SoC specific hobs are of HOB_TYPE_GUID_EXTENSION.
Call SoC specific soc_display_hob() to display the content as necessary.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ib4e4abe2d89b04504d1988d8d3c2fde268b5345a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
After removal of CAR_MIGRATION there are no more reasons
to carry around ENV_STAGE_HAS_BSS_SECTION=n case.
Replace 'MAYBE_STATIC_BSS' with 'static' and remove explicit
zero-initializers.
Change-Id: I14dd9f52da5b06f0116bd97496cf794e5e71bc37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic3eb8fca22e73a0d485a6c1bf35c33b1fc606e4a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41488
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert the remaining files in src/drivers to use SPDX identifiers.
int15.h and default_brightness_levels.asl did not have license headers,
but they were both copied from other GPL2 files, so they should be under
the GPL2 as well.
ne2k.c and drm_dp_helper.h are licensed under custom BSD-like licenses
that do not have an SPDX equivalent, so they are added as exceptions
to the license header lint.
Change-Id: I87fb1c637b8d11b0463f7c19f70b847413e14aed
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The ALC5682 headset codec can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is supported
- Data Ports 1-4 are supported as both source and sink
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 1:
chip drivers/soundwire/alc5682
register "desc" = ""Headset Codec""
device generic 0.1 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW01)
{
Name (_ADR, 0x000021025D568200)
Name (_DDN, "Headset Codec")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
[...]
}
}
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-bra-flow-controlled", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
