| Age | Commit message (Collapse) | Author |
|---|
|
Move the FSP-specific call for tearing down cache-as-RAM out of
postcar.c and replace it with an empty weak function.
This patch omits checking if (IS_ENABLED(CONFIG_FSP_CAR)). The
temp_ram_exit.c file with the real fsp_temp_ram_exit() is only built
when CONFIG_FSP_CAR is true.
Change-Id: I9adbb1f2a7b2ff50d9f36d5a3640f63410c09479
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/20965
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize postcar frame once finish FSP memoryinit
This patch was merged too early and reverted.
Originally reviewed on https://review.coreboot.org/#/c/20534
Change-Id: Id36aa44bb7a89303bc22e92e0313cf685351690a
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20688
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Our current struct for I2C segments `i2c_seg` was close to being compa-
tible to the Linux version `i2c_msg`, close to being compatible to SMBus
and close to being readable (e.g. what was `chip` supposed to mean?) but
turned out to be hard to fix.
Instead of extending it in a backwards compatible way (and not touching
current controller drivers), replace it with a Linux source compatible
`struct i2c_msg` and patch all the drivers and users with Coccinelle.
The new `struct i2c_msg` should ease porting drivers from Linux and help
to write SMBus compatible controller drivers.
Beside integer type changes, the field `read` is replaced with a generic
field `flags` and `chip` is renamed to `slave`.
Patched with Coccinelle using the clumsy spatch below and some manual
changes:
* Nested struct initializers and one field access skipped by Coccinelle.
* Removed assumption in the code that I2C_M_RD is 1.
* In `i2c.h`, changed all occurences of `chip` to `slave`.
@@ @@
-struct i2c_seg
+struct i2c_msg
@@ identifier msg; expression e; @@
(
struct i2c_msg msg = {
- .read = 0,
+ .flags = 0,
};
|
struct i2c_msg msg = {
- .read = 1,
+ .flags = I2C_M_RD,
};
|
struct i2c_msg msg = {
- .chip = e,
+ .slave = e,
};
)
@@ struct i2c_msg msg; statement S1, S2; @@
(
-if (msg.read)
+if (msg.flags & I2C_M_RD)
S1 else S2
|
-if (msg.read)
+if (msg.flags & I2C_M_RD)
S1
)
@@ struct i2c_msg *msg; statement S1, S2; @@
(
-if (msg->read)
+if (msg->flags & I2C_M_RD)
S1 else S2
|
-if (msg->read)
+if (msg->flags & I2C_M_RD)
S1
)
@@ struct i2c_msg msg; expression e; @@
(
-msg.read = 0;
+msg.flags = 0;
|
-msg.read = 1;
+msg.flags = I2C_M_RD;
|
-msg.read = e;
+msg.flags = e ? I2C_M_RD : 0;
|
-!!(msg.read)
+(msg.flags & I2C_M_RD)
|
-(msg.read)
+(msg.flags & I2C_M_RD)
)
@@ struct i2c_msg *msg; expression e; @@
(
-msg->read = 0;
+msg->flags = 0;
|
-msg->read = 1;
+msg->flags = I2C_M_RD;
|
-msg->read = e;
+msg->flags = e ? I2C_M_RD : 0;
|
-!!(msg->read)
+(msg->flags & I2C_M_RD)
|
-(msg->read)
+(msg->flags & I2C_M_RD)
)
@@ struct i2c_msg msg; @@
-msg.chip
+msg.slave
@@ struct i2c_msg *msg; expression e; @@
-msg[e].chip
+msg[e].slave
@ slave disable ptr_to_array @ struct i2c_msg *msg; @@
-msg->chip
+msg->slave
Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These Kconfig options can be reused for the same purpose of selecting
the correct i2c pins for probing the analog output EDID in C native
graphic init. For this purpose this patch makes those options
independent of GFX_GMA and MAINBOARD_HAS_LIBGFXINIT.
Change-Id: If29c541d414e12b95d96ae9c249a7a20e863fe06
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Migrate opregion code from northbridge/intel/common to
drivers/intel/gma in preparation for consolidation with
soc/intel/common opregion code. Rename init_igd_opregion()
for clarity and disambiguation with other implementations.
Change-Id: I2d0bae98f04dbe7e896ca34e15f24d29b6aa2ed6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
EvLoader is FSP module which loads and runs MMA tests.
With Change-Id Id31ddd4595e36c91ba7c888688114c4dbe4db86a, EvLoader
needs to be enabled with UPD param from coreboot.
Change-Id: Ifb860b98d6e6f21c116473a962f647e491e8546f
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/20863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Get rid of old hybrid graphics driver and use the new one.
1. Disable IGD and PEG in early romstage.
The PEG port will get disabled on devices that do not have a
discrete GPU. The power savings are around ~1Watt.
The disabled IGD does no longer waste GFX stolen memory.
2. Get rid of PCI driver
The Nvidia GPU can be handled by the generic PCI driver and allows
to use the ACPI _ROM generator for Switchable graphics.
3. Settings are stored in devicetree.
One driver for all Lenovo hybrid graphics capable devices.
4. Add support for Thinker1 GPU power handling.
Only boards that do use reference design 2012 are known to be
supported. Needs test on boards that do you use reference design 2013.
Should reduce idle power consumption when using IGD by ~5Watt.
Tested on Lenovo T430 without DGPU. PEG port is disabled.
Needs test on all devices.
Change-Id: Ibf18b75e8afe2568de8498b39a608dac8db3ba73
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use new hybrid graphics driver to get device state.
Move remaining code to romstage.c.
Tested on Lenovo T500:
* Linux 4.11.4 on Fedora 25
* Integrated (using NGI)
* Discrete (using VGA OpROM)
* Switchable (using NGI and VGA OpROM), tested with DRI_PRIME
No regressions found.
Change-Id: Iad2eccaab19c71f11308853ba9326d8186e67c93
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Introduce a chip_driver that uses devicetree instead of Kconfig.
The new driver has the following advantages:
* No more wasted IGD GFX stolen memory
* Can be used by T500 series
* Is even run on devices that do not have a dGPU installed
* Can disable unused PEG port on devices without dGPU (and save power)
* Use devicetree instead of Kconfig options
* Support for multiple hybrid GPIO active levels
* Support for backlight control GPIO
* Support for _ROM on Optimus capable devices
The driver is split into romstage part and ramstage part.
Every mainboard has to call the driver in romstage to get the requested
GPU state. The mainboard code then has to toggle GPU power or disable
the IGD or PEG port.
The ramstage part does handle the hygrid graphics GPIO, including
optional backlight mux GPIO. Every GPIO can have it's own active level,
as defined in devicetree. Devices are no longer disabled in ramstage.
The existing hybrid graphics driver does the same configuration and
should not interfere with this commit until it has been removed.
Change-Id: Ie467f9a18b35ab3b8a523dbf51c5575db5b374a5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
If all strings in SMBIOS table are empty, smbios_string_table_len
function should return 2, cause every table must end with "\0\0".
Also replace "eos" field type in smbios structures
from char to u8.
Change-Id: Ia3178b0030aa71e1ff11a3fd3d102942f0027eb1
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-on: https://review.coreboot.org/20840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This commit adds a new driver for the RT5663 codec to use instead
of the generic i2c driver. Since the kernel needs additional
driver-specific device properties we need a BIOS driver that can
provide those properties.
The kernel driver devicetree properties for this codec are at:
linux/Documentation/devicetree/bindings/sound/rt5663.txt
This was tested by booting and verifying the generated SSDT
contains the expected device properties in _DSD.
Scope (\_SB.PCI0.I2C4)
{
Device (RT53)
{
Name (_HID, "10EC5663")
Name (_UID, Zero)
Name (_DDN, "Realtek RT5663 Codec")
Method (_STA, 0, NotSerialized)
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate ()
{
I2cSerialBus (0x0013, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C4",
0x00, ResourceConsumer)
GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer)
{
0x0051
}
})
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package (0x05)
{
Package (0x02)
{
"irq-gpios",
Package (0x04)
{
\_SB.PCI0.I2C4.RT53,
Zero,
Zero,
Zero
}
},
Package (0x02)
{
"realtek,dc_offset_l_manual",
0x00FFD160
},
Package (0x02)
{
"realtek,dc_offset_r_manual",
0x00FFD1C0
},
Package (0x02)
{
"realtek,dc_offset_l_manual_mic",
0x00FF8A10
},
Package (0x02)
{
"realtek,dc_offset_r_manual_mic",
0x00FF8AB0
}
}
})
}
}
Change-Id: I3425fcbe13c9a5987fc91086d283a86db55c0819
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Ensure that the VLF bit will be cleared after a power loss event even if
the stopwatch has expired before the code to clear the bit is reached.
Change-Id: Ib2cfdabf4cd4df834395d6a102c6ae70568e71db
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
When resuming from ACPI S3 suspend, EHCI controller
may be in D3 power-management state. Bring it to D0
early so it is functional for console.
NOTE: D3hot->D0 transition was observed to reset
previous programming of PCI_COMMAND register.
Change-Id: Id177ce61926beb057fe67ba42a306d8e565d2657
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Always sanity check for EHCI class device and move
PCI function power enablement up.
Change-Id: I1eebe813fbb420738af2d572178213fc660f392a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is assumption of static EHCI_BAR_INDEX, try to
clean it up by bringing BAR programming at one spot.
Change-Id: Ie16090536ac5470c24720a54813015250ae2d0dd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If TTYS0_BAUD is not configured, then by default use baudrate of 115200.
BUG=b:64030366
Change-Id: Ida4c7ae77aba5dfd4ec331e22a54ce43a91bde00
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In S3 resume, wifi is one of the wake sources.
If elog is enabled in config, then log wifi wakes in elog.
BUG=b:36992859
TEST= Build for Soraka. Do WoWlan during S3. Verify elog having update
on wake due to Wifi.
Change-Id: I7d42c5c81e0a3f7a3f94c3f6b7d2ebdf029d1aff
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/20455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This excludes files which are mostly spaces, which I felt should be
handled separately.
Change-Id: I33043a3090e2fc6e9d2fd81e8a5e46fb6cb0aa35
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The functionality of the FAN controller is extended to provide a
lowest startup speed of the FAN. Add the parameter "fanmin" to
the fan_ctrl_t structure and initialize the value.
Change-Id: Ib2e093ed6f5fc29bbea879779eb4777eb371b937
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Gather related code in the new file drivers/pc80/rtc/mc146818rtc_boot.c,
call sanitize_cmos() from C environment bootblock.
Change-Id: Ia5c64de208a5986299c0508d0e11eeb8473deef1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fixes builds with BOOTBLOCK_CONSOLE && USE_OPTION_TABLE.
Change-Id: I1c7e9baa60f33c2c3651e2def0335454f7e20451
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Assert incase unable to locate hob list pointer due to cbmem
is not available.
Change-Id: I17f54b07ab149ae06d09226ed9063189d829efe2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit 399c022a8c6cba7ad6d75fdf377a690395877611.
This was merged too early. I'll repost it.
Change-Id: Iabac0aaa0a16404c885875137cf34bf64bf956f7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20686
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize postcar frame once finish FSP memoryinit
Change-Id: I888d471fa620b7fc9f8975524a31f662e1fc5079
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
New post codes are
POST_FSP_MEMORY_EXIT
POST_FSP_SILICON_EXIT
This patch will make it more consistent to debug FSP hang
and reset issues.
Bug=none
Branch=none
TEST=Build and Boot on eve
Change-Id: I93004a09c2a3a97ac9458a0f686ab42415af19fb
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
FSP doesn't publish smbios_memory_info_guid during S3 resume
path. Hence it's recommended to skip consuming this HOB in
S3 resume.
Bug=none
Branch=none
TEST=Build and boot Lars system with this patch.
Change-Id: I321751523b1ea3326ffc23f4d4c53d5362482674
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The function find_fsp() parses the FSP header and returns either a valid
pointer to the FSP_INFO_HEADER or an error code. The caller of
find_fsp() only takes care about a NULL-pointer but not about a possible
error code. This leads to memory access violations in case of error when
FspTempRamInit is called.
To avoid this and to let the user know that there was an error while
parsing the FSP header show an error message and the error code.
Change-Id: I67fef0a53fb04c8ba5d18b5d4ef2fdc1aeba869e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We don't need another level of indirection for these
hardware accesses.
Change-Id: Ic567d8272e5dd943ce19babbd7ad57ba5d86c354
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As "var" is not a pointer but a variable there is no need to cast it to
a pointer before using the value.
Change-Id: I7f8e3ceadaa4301c50c5f5480cccab2be904aa9a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The function prototype isn't used any more, remove it.
Change-Id: Ie5bd4e4ec8f28bc0768d5427cf734ef77855a15e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Including <fsp/gop.h> in util.h causes issues with
redeclarations when using SOC_INTEL_COMMON_GFX_OPREGION
along with FSP 1.1. Separating it out and including
directly in vbt.c has no negative side effects.
Change-Id: I2d82c2da40b067272d876929fc73b97f490146a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some of these can be changed from #if to if(), but that will happen
in a follow-on commmit.
Change-Id: Ib3a1cf04482a8f19b159c31cfb16a7b492748d91
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new method to restore ASLS on S3 resume.
Use new interface introduced in last commit.
Change-Id: I254683081cbaf3a5938794dcba140ac9ee07f48a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add and use new interface to set and get GNVS' ASLB register.
To be used by Intel's gma driver to set ASLB at ACPI table
creation and to get ASLB on S3 resume.
Change-Id: If30c6b2270069783b0892774802f47406404da5f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new method to set ASLS register that holds the
ACPI OpRegion base address.
Change-Id: I4850500ac6d58f80b0eddc81514053c87774405c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The macro FPGA_SET_PARAM was introduced to make the setting of different
FPGA registers with the appropriate values from hwinfo more
transparent. The hwilib takes care about the size of the provided buffer
where the requested value should be stored in. The fields in hwinfo have
not always the same size as the matching registers in the FPGA. So to
avoid errors resulting in a too small buffer when calling hwilib_get_field()
the buffer is now fixed to 32 bit and will be casted to the destination
type when the value is written into the FPGA register.
Changing the field size in hwilib would be the wrong way as the defined
lengths are specified this way to be expandable in the future.
In addition the number of maximum supported temperature sensors is
increased to 8 as the FPGA now supports more.
Change-Id: I0c697106783158420708a973c3cff2be90fa4fce
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix undefined behavior found by clang's -Wshift-sign-overflow, find,
and source inspection. Left shifting an int where the right operand is
>= the width of the type is undefined. Add UL suffix since it's safe
for unsigned types.
Change-Id: I5240a19647c8ad59f64925f3e1c199446a886d2d
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix reports found by undefined behavior sanitizer. Left shifting an int
where the right operand is >= the width of the type is undefined. Add
UL suffix since it's safe for unsigned types.
Change-Id: If2d34e4f05494c17bf9b9dec113b8f6863214e56
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some of these can be changed from #if to if(), but that will happen
in a follow-on commmit.
Change-Id: If80e0c4e1c9911b44853561b03aef1c741255229
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The flag FF_FreezeDis marks if this feature is disabled. For a better
readability rename freeze_mode to freeze_disable and invert the meaning
of this information.
Change-Id: I648b2392d2c8046965479511fde485a9cb934378
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
According to the datasheet the RTC needs a power rising slope of no more
than 100µs/V to ensure a correct power-on reset. If the mainboard that
hosts the RTC cannot guarantee this, a software reset sequence is needed
in the case where the battery was drained completely.
As the rising slope of the power supply depends on so many parameters
and is highly mainboard specific, refactor the initialization code to
perform a software reset every time a power loss event is recognized by
the RTC.
Change-Id: If64d672e51667523058041bd00e1e50ac047143d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The warning -Wstack-usage= doesn't seem to exist on clang, so trying
to disable it makes the compiler unhappy about non-existent pragmas.
Catching this on gcc is good enough, so let's disable it for the clang
case
Change-Id: Ia3716a83ba41743ac1dbe73e70abd170de30d7ab
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use full text GPLv2 header.
Change-Id: I937aed725ebf0d2e12c52ac4d94794830fbd764d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
If RT8168_GET_MAC_FROM_VPD selected, use r8168
driver with some slight mods to check the VPD
for a mac address. Otherwise, check for mac
address in cbfs. Use default mac address if
cannot find one.
BUG=b:62090148, b:35775024
BRANCH=None
TEST=Boot to kernel. Insert mac address into VPD
vpd -s ethernet_mac=<address>
reboot the system.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: I7ff29de2c4c3635dc786686cc071c68d51b0f975
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This driver reinvented MAINBOARD_DO_NATIVE_VGA_INIT in a very special
way: If it wasn't set, perform native gfx init in textmode, if it was
set, perform native gfx init in linear framebuffer mode. Test for
LINEAR_FRAMEBUFFER instead and make the native gfx init optional.
Also, make Kconfig reflect the actual behaviour.
Change-Id: If20fd1f5b0f4127b426e8ff94acc61fcd4eb49af
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Commit 2e7f6cc introduced the 'no graphics init' option for
FSP 1.1 SoCs using a GOP driver to init the display, but selecting
that option while including a VBT breaks compilation for Braswell
and Skylake devices because the VBT and GOP driver are intertwined.
This patch decouples the VBT from the GOP driver execution,
allowing the 'no graphics init' option to compile (and work)
properly when CONFIG_ADD_VBT_DATA_FILE=y.
Change-Id: Ifbcf32805177c290c4781b32bbcca679bcb0c297
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20210
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
|
|
The siemens/mc_apl1 mainboard needs more functionality provided by
Siemens NC FPGA. The additional functionality contains backlight
brightness/PWM control and Dsave time for board reset.
Change-Id: I6b65b01f0d67afe598b7c005868f71b00dec56fd
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I1c4b30ab47e12ec35cb681ec5c6635ecd20aa2e5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19121
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The RTC RX6110SA has several configuration options which might be
interesting to set. To make this setup independent of the driver itself
but let it still be configurable on mainboard level, add more
configuration options to the chip driver.
Change-Id: I7f8b2aa7cd001a887f271be36f655e10e60e778b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
The new config choice is called RUN_FSP_GOP. Some things had to happen
on the road:
* Drop confusing config GOP_SUPPORT,
* Add HAVE_FSP_GOP to chipsets that support it,
* Make running the GOP an option for FSP2.0 by returning 0
in random VBT getters.
Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix regression introduced by commit 5c026445
(drivers/intel/wifi: Add support for generating SSDT table)
In case the regular PCI path is taken, there're no chip_ops and the code
will segfault. The bug was covered by other bugs that caused this code
to never execute.
Add NULL pointer checks and only fill in device name if one is provided.
Tested on Lenovo T430 and wifi card 8086:0085.
Change-Id: I84e804f033bcd3af1a7f76670275fdf5159d381f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
These Kconfig files had help text that was not indented further than
the 'help' keyword.
Change-Id: Ia9fdb22c0f5f0cec0c9d08aa6603b4ce8d60d9a3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
FSP_IMAGE_ID and FSP_IMAGE_REV are defined in `FspUpdVpd.h`. Check
against these to avoid mismatching definitions in coreboot and the
FSP blob.
Change-Id: Ic86229e7f0c2d0525b8a79add292c6c81a349aa6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This typo existed in code before rewriting for using
defines and it's clearly visible after rewrite.
Previously it was writing to reserved area of GMBUS0 register,
while values are matching those of GMBUS1.
This line probably is a no-op since it's just sending the STOP
again (without an address set this time).
Change-Id: Ic85ef925c41ad01ed469f9d4f4412cbe44ca6d8e
Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/16341
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put
it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are
two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt
and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for
`HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model
that with additional symbols.
Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers
that support a linear framebuffer. Some related settings moved to the
drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are
hardcoded.
Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER.
* Let drivers select it if they are in charge.
* Don't select it on the mainboard level if a driver handles it.
Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The driver for the RTC RX6110SA is designed to be used with I2C bus.
This patch adds the possibility to use SMBus operations to access the
RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It
is not enabled per default so that I2C will be used. One can set this
switch on board level to use SMBus instead.
Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/19978
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Place it into new edid_fill_fb.c, and invert the logic of the Kconfig
guard (NATIVE_VGA_INIT_USE_EDID is now !NO_EDID_FILL_FB). It has to be
selected by all drivers that use MAINBOARD_DO_NATIVE_VGA_INIT but pro-
vide their own fill_lb_framebuffer() implementation.
Change-Id: I90634b835bd8e2d150b1c714328a5b2774d891bd
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As the comment above the change indicates, and per ACPI spec,
_DSS has one argument.
Change-Id: Ic05832d412cd0c89ed3a275c4db694a9118dac28
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Now that all platforms are updated to provide spi bus map, there is no
need to keep the spi_setup_slave as a weak symbol.
BUG=b:38430839
Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6e710b95cade0ea68f787f33c0070613d64b6da6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I786848cd48c6fcfecf9b72c60623cadcfcbb7db7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Define a new spi_flash_ops structure, move all spi flash operations to
this structure and add a pointer to this structure in struct spi_flash.
BUG=b:38330715
Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it
so that drivers can use it outside spi_flash.c.
2. Make southbridge intel spi driver use spi_flash_generic_probe if
spi_is_multichip returns 0.
3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to
provide specialized probe functions. With this change, the specialized
spi flash probe functions are now associated with a particular spi
ctrlr structure and no longer disconnected from the spi controller.
BUG=b:38330715
Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Pointer to spi_slave structure can be passed in as const to spi flash
probe functions since the probe functions do not need to modify the
slave properties.
BUG=b:38330715
Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19707
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused function declaration spi_fram_probe_ramtron.
BUG=b:38330715
Change-Id: I05e6c5c2b97d6c8a726c0e443ad855f9bcb703f9
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19706
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of making all SPI drivers allocate space for a spi_flash
structure and fill it in, udpate the API to allow callers to pass in a
spi_flash structure that can be filled by the flash drivers as
required. This also cleans up the interface so that the callers can
maintain and free the space for spi_flash structure as required.
BUG=b:38330715
Change-Id: If6f1b403731466525c4690777d9b32ce778eb563
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new member page_size to spi_flash structure so that the various
spi flash drivers can store this info in spi_flash along with the
other sizes (sector size and total size) during flash probe. This
removes the need to have {driver}_spi_flash structure in every spi
flash driver.
This is part of patch series to clean up the SPI flash and SPI driver
interface.
BUG=b:38330715
Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of storing spi flash device structure in spi flash driver, use
boot_device_spi_flash callback to obtain pointer to boot device spi
flash structure.
BUG=b:38330715
Change-Id: Idd50b7644d1a4be8b62d38cc9239feae2215103c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows callers to retrieve handle to the boot device spi_flash structure.
BUG=b:38330715
Change-Id: I1c07327115e0449cbd84d163218da76a6fa2cea0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There's no users of vbe_mode_info_valid() aside from the local
compilation units. Remove the declaration and make the function
static to the current global implementers.
Change-Id: I4872ac6ad15ba6a86bba69d51a8348b9921c152d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For some reason the "interface" for adding framebuffer information
is sitting in src/include/vbe.h while also guarding the call to
fill_lb_framebuffer() with vbe_mode_info_valid() along with some
macro if CONFIG_* for good measure.
Move the fill_lb_framebuffer() declaration to coreboot_tables.h and
provide a comment about how it should be used. Also, now that
there's no need for the notion of a global vbe_mode_info_valid()
remove it from the conditional call path of fill_lb_framebuffer().
Change-Id: Ib3ade6314624091ae70424664527a02b279d0c9b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We have several different UART implementations of which three support a
timeout when receiving characters. In all of these three implementations
there is a bug where when the timeout is hit the last received character
will be returned instead of the needed 0.
The problem is that the timeout variable i is decremented after it has
been checked in the while-loop. That leads to the fact that when the
while-loop is aborted due to a timeout i will contain 0xffffffff and not
0. Thus in turn will fool the following if-statement leading to wrong
return value to the caller in this case. Therefore the caller will see a
received character event if there is none.
Change-Id: I23ff531a1e729e816764f1a071484c924dcb0f85
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/19731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
And don't link it. It's for ROMCC.
To make code happy that uses the ROMCC interface read_option(),
read_option_lowlevel() is ported to mc146818rtc.c along with
a message to use get_option() instead.
Change-Id: I54ea08de034766c8140b320075d36d5e811582fa
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Move drivers/storage into commonlib/storage to enable access by
libpayload and indirectly by payloads.
* Remove SD/MMC specific include files from include/device
* Remove files from drivers/storage
* Add SD/MMC specific include files to commonlib/include
* Add files to commonlib/storage
* Fix header file references
* Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver
* Add Kconfig source for commonlib/storage
* Rename *DEVICE* to *COMMONLIB*
* Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE*
TEST=Build and run on Galileo Gen2
Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Delay for a while after the switch operations to let the card recover.
TEST=Build and run on Galileo Gen2
Change-Id: I938e227a142e43ed6afda80d56af90df0bae1b05
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This driver enables the usage of the external RTC chip RX6110 SA
(http://www5.epsondevice.com/en/products/i2c/rx6110sab.html) which is
connected to the I2C bus. The I2C address of this device is fixed. One
can change parameters in the device tree so that the used setup can be
adapted to match the configuration of the device on the mainboard.
Change-Id: I1290a10c2d5ad76a317c99c8b92a013309a605d6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/19625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Fix bug detected by coverity to handle the zero capacity case. Specific
changes:
* Reduce loop count by one to handle zero capacity case
* Use structure instead of dual arrays
* Move structures into display_capacity routine
Coverity Issues:
* 1374931
* 1374932
* 1374933
* 1374934
TEST=Build and run on Galileo Gen2
Change-Id: Ie5c96e78417b667438a00ee22c70894a00d13291
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove unused field in generic SD/MMC controller data structure.
TEST=Build and run on Galileo Gen2
Change-Id: I7169dca07509a6f2513d62b593742daf764010b2
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Provide a failing get_wifi_sar_limits() to allow SAR Kconfig
options to be selected without relying on CHROMEOS which currently
has the only code to provide SAR data.
Change-Id: I1288871769014f4c4168da00952a1c563015de33
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19580
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
spi_crop_chunk is a property of the SPI controller since it depends
upon the maximum transfer size that is supported by the
controller. Also, it is possible to implement this within spi-generic
layer by obtaining following parameters from the controller:
1. max_xfer_size: Maximum transfer size supported by the controller
(Size of 0 indicates invalid size, and unlimited transfer size is
indicated by UINT32_MAX.)
2. deduct_cmd_len: Whether cmd_len needs to be deducted from the
max_xfer_size to determine max data size that can be
transferred. (This is used by the amd boards.)
Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19386
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested-by: coreboot org <coreboot.org@gmail.com>
|
|
tis_close() must be called after tis_open() otherwise the locked
locality isn't released and the sessions hangs.
Tested=PC Engines APU2
Change-Id: I1a06f6a29015708e4bc1de6e6678827c28b84e98
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/19535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
device is run before drivers to generate .config and the first default
takes precedence so this override achieves nothing.
Change-Id: Ib8d333a53a0dadcc94e47ca5460b23d49cf7eb52
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Id90aa210ff72092c4ab638a7bafb82bd11889bdc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On Chrome OS systems a memory setting change is needed to be deployed
without updating the FSP blob proper. Under such conditions one needs
to trigger retrain of the memory. For ease of use provide an option,
FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS, which incorproates the SoC
and mainboard memory setting version number into the FSP version
passed to the platform. The lower 8 bits of the FSP version are the
build number which in practice is normally 0. Use those 8 bits to
include the SoC and mainboard memory settings version. When FSP,
SoC, or mainboard memory setting number is bumped a retrain will be
triggered.
BUG=b:37687843
Change-Id: I6a269dcf654be7a409045cedeea3f82eb641f1d6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19452
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The devicetree data structures have been available in more than just
ramstage and romstage. In order to provide clearer and consistent
semantics two new macros are provided:
1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE
2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST
The ROMSTAGE_CONST attribute is used in the source code to mark
the devicetree data structures as const in early stages even though
it's not just romstage. Therefore, rename the attribute to
DEVTREE_CONST as that's the actual usage. The only place where the
usage was not devicetree related is console_loglevel, but the same
name was used for consistency. Any stage that is not ramstage has
the const C attribute applied when DEVTREE_CONST is used.
Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19333
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The SD/MMC support is broken into several pieces. There are three main
data structures:
* sdhci_ctrlr - This is SDHCI controller specific and defined in
include/device/sdhci.h
* sd_mmc_ctrlr - This contains generic controller management data and
defined in include/device/sd_mmc_ctrlr.h
* storage_media - This contains the flash storage device management data
and is defined in include/device/storage.h
The SD/MMC driver consists of several components:
* SDHCI controller code
* bouncebuf.c
* bouncebuf.h
* pci_sdhci.c
* sdhci.c
* sdhci.h
* sdhci_adma.c
* sdhci_display.c
* Flash storage device support
* mmc.c
* mmc.h
* sd.c
* sd_mmc.c
* sd_mmc.h
* storage.c
* storage.h
* storage_erase.c
* storage_write.c
Kconfig values enable various portions of the controller and storage
drivers to be built to reduce the overall size of what is included in
the final image.
Full read/write/erase operations are provided for those platforms which
want to take advantage. It is also possible to build the driver to
perform initialization only. By default, this driver is not included in
any platform, platforms must specifically select DRIVERS_STORAGE to add
the SD/MMC support.
After this patch is reviewed and merged, there are some additional
patches:
* Common CAR storage area - Use a predefined region of CAR to pass data
structures between bootblock through to romstage. This allows early
stages to preform the SD/MMC device initialization and later stages
to use the SD/MMC device without further initialization. The example
code initializes the SD/MMC device in bootblock and uses the SD/MMC
device in romstage without further initialization.
* CBMEM ID - Add a CBMEM ID value for the data structures so that they
may be passed from romstage to ramstage and eventually the payload.
The example uses the SD/MMC device in ramstage without further
initialization.
* Move the SD/MMC driver into commonlib
* Have libpayload build the SD/MMC driver from commonlib. The intent
is to pass the controller state to libpayload so that the SD/MMC
device can be used without further initialization.
* On some platforms, have depthcharge use the commonlib SD/MMC driver
History:
Copy the SD/MMC driver from depthcharge revision eb583fa8 into coreboot
and make the following changes:
* Removed #include "config.h" from mmc.c, allow the lint tests to pass.
* Move include files from drivers/storage into include/device.
* Rename mmc.h to storage.h.
* Add the Kconfig and Makefile and make edits to get the code to build.
* Add support to initialize a PCI controller.
* Fix formatting issues detected by checkpatch.
* Fix data flow issues detected by checkpatch.
* Add the missing voltage (MMC_VDD_35_36) into the voltage mask.
* Rename the macros mmc_debug, mmc_trace and mmc_error to sd_mmc_*.
* Replace printf with sd_mmc_error.
* Add sdhc_debug, sdhc_trace and sd_error macros.
* Add Kconfig values to enable storage device debugging and tracing.
* Add tracing and debug support to the SDHCI driver.
* Allow SOC to override more controller features.
* Split out ADMA support.
* Move 1V8 support into SOC routine.
* Move HS400 support into SOC routine.
* Rework clock handling.
* Change all controller references to use ctrlr.
* Update the voltage handling.
* Update modes of operation.
* Move DMA fields into MmcCtrlr.
* Update bus width support.
* Change MMC_TIMING_* to BUS_TIMING_*.
* Rename MMC_MODE_ to DRVR_CAP.
* Move quirks into ctrlr->caps.
* Associate removeable with the controller.
* Statically allocate MmcMedia.
* Replace the SdhciHost structure with the MmcCtrlr structure.
* Split the code to support other SD/MMC controllers.
* Split out erase and write support.
* Update the code to be more consistent with the coreboot coding style.
* Only expose calling APIs.
* Divide up mmc.c into 4 modules: MMC, SD, storage card, common code.
* Update debug and error messages.
* Add partition support.
* Display clock frequencies once in MHz.
* Remove mmc_send_cmd, use ctrlr->send_cmd instead.
* Handle error from sd_send_op_cond.
* Allow mainboard to control delays around CMD 0.
* Support command logging.
* Mainboard may set delay after SD/MMC command.
* Display serial number with sd_mmc_trace.
* Remove cmd set parameter from mmc_switch.
* Display errors for timeout and comm errors.
* Add LED support.
* Move 64bit DMA flag into ctrlr->caps.
* Rework PIO transfer routine.
* Add HS200 bus tuning.
* Add support for HS400.
* Use same format for HS400, HS200 and HS52.
* Reduce storage_media structure size
* Add routine to update code pointers
* Add display of storage setup
* Display controller setup
TEST=Build and run on Reef and Galileo Gen2
Change-Id: I9b5f9db1e27833e4ce4a97ad4f5ef3a46f64f2a2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19208
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The vendor.irq field was originally intended for use as the TPM 1.2
"command complete" interrupt. However, all actual coreboot tpm drivers
and hardware use the vendor.status method of checking command completion
instead, and this irq field is not used.
Let's just remove this unused functionality to simplify the code.
BRANCH=none
BUG=b:36786804
TEST=Boot reef w/ serial enabled firmware, verify verstage sees
"cr50 TPM" and does not complain about lack of tis_plat_irq_status().
TEST=Boot eve w/ serial enabled firmware, verify verstage sees
"cr50 TPM" and does not complain about lack of tis_plat_irq_status().
Change-Id: I994c5bfbd18124af9cb81d9684117af766ab0124
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/19396
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The Cr50 TPM uses an IRQ to provide a "status" signal used for hand-shaking
the reception of commands. Real IRQs are not supported in firmware,
however firmware can still poll interrupt status registers for the same
effect.
Commit 94cc485338a3 ("drivers/i2c/tpm/cr50: Support interrupts for status")
added support for the Cr50 driver on X86 platforms to use a KConfig file
to supply an IRQ which it would poll using acpi_get_gpe. If the IRQ is
not supplied, the Cr50 driver inserts a 20 ms wait.
Unfortunately this doesn't work so well when using the i2c connected Cr50
on ARM platforms. Luckily, a more generic implementation to allow a
mainboard to supply a Cr50 IRQ status polling function was solved for SPI
connected Cr50s by commit 19e3d335bddb ("drivers/spi/tpm: using tpm irq to
sync tpm transaction").
Let's refactor the i2c c50 driver to use this same approach, and change
eve and reef boards to make use of DRIVER_TPM_TIS_ACPI_INTERRUPT for
specifying the TPM flow control interrupt.
This essentially reverts these two commits:
48f708d199 drivers/i2c/tpm/cr50: Initialize IRQ status handler before probe
94cc485338 drivers/i2c/tpm/cr50: Support interrupts for status
And ports this commit to i2c/tpm/cr50:
19e3d335bd drivers/spi/tpm: using tpm irq to sync tpm transaction
As a side effect the tpm_vendor_specific IRQ field goes back to its
original usage as the "TPM 1.2 command complete" interrupt, instead of
being repurposed to hold the flow control IRQ.
BRANCH=none
BUG=b:36786804
TEST=Boot reef w/ serial enabled firmware, verify verstage sees
"cr50 TPM" and does not complain about lack of tis_plat_irq_status().
TEST=Boot eve w/ serial enabled firmware, verify verstage sees
"cr50 TPM" and does not complain about lack of tis_plat_irq_status().
Change-Id: I004329eae1d8aabda51c46b8504bf210484782b4
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/19363
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
MAINBOARD_HAS_SPI_TPM_CR50 describes a capability of the board and SPI_TPM
is only on if we actually want to compile in the TPM code. For example,
in src/drivers/i2c/tpm/Kconfig MAINBOARD_HAS_I2C_TPM_CR50 also doesn't
depend on SPI_TPM.
This problem manifests itself as the following build issue when building
with MAINBOARD_HAS_I2C_TPM_CR50 but without an explict "select TPM2":
src/Kconfig:296:error: recursive dependency detected!
src/Kconfig:296: symbol MAINBOARD_HAS_TPM2 is selected by MAINBOARD_HAS_TPM_CR50
src/Kconfig:408: symbol MAINBOARD_HAS_TPM_CR50 depends on MAINBOARD_HAS_SPI_TPM_CR50
src/drivers/spi/tpm/Kconfig:15: symbol MAINBOARD_HAS_SPI_TPM_CR50 depends on SPI_TPM
src/drivers/spi/tpm/Kconfig:1: symbol SPI_TPM depends on TPM2
src/Kconfig:396: symbol TPM2 is selected by MAINBOARD_HAS_TPM2
MAINBOARD_HAS_SPI_TPM_CR50 shouldn't depend on SPI_TPM.
BRANCH=none
BUG=b:36786804
TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are
configured to use IRQ flow control when talking to the Cr50 TPM.
Change-Id: I0cb3f6d3aa4159bad563a6a4b006d7f4825e04b4
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Suggested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19411
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use spi_setup_slave to fill up the spi_slave structure with
pointer to spi_ctrlr structure which can then be used to perform all
spi operations.
Change-Id: I2804ed1e85402426a654352e1ceaf0993546cd8b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19385
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Depend on I2C_TPM to prevent showing the menu entry on systems
that do not have an I2C TPM installed.
Change-Id: I7cd647c9c7e9721eab96ab64b844a882f156ee68
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19374
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
TPM ACPI entries are automatically generated, and the old static
TPM ASL file is obsolete. Remove the reference to this obsolete
static and empty ASL file.
Delete src/drivers/pc80/tpm/acpi/tpm.asl.
Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add SSDT generator for MIPI CSI camera to create ACPI objects
used by the Intel kernel drivers.
* SSDB: Sensor specific database for camera sensor.
* PWDB: Power database for all the camera devices.
* CAMD: ACPI object to specify the camera device type.
BUG=b:36580624
BRANCH=none
TEST=Build and boot poppy. Dump and verify that the generated SSDT table
has the required entries.
Change-Id: Ief9e56d12b64081897613bf1c7abcdf915470b99
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/18967
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
We're already reading the RTC whenever we file an event, we might as
well print out the value at that time. Having a few RTC timestamps in
the firmware log makes it easier to correlate that part of the log to a
particular boot once we start having multiple boots in the log.
Change-Id: I750dd18aa2c43c95b8c1fbb8f404c1e3a77bec73
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19305
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
