| Age | Commit message (Collapse) | Author |
|---|
|
When the entry delay of L0s is less than the entry delay of L1, GL9755
will enter L0s state first. When it exits from L0s state, the time of L1
entry will be reset. Therefore, the conditions for entering L1 state
cannot be met. In order to enter L1 state, L0s needs to be disabled.
BUG=b:195611000
TEST=Verify GL9755 enters L1 by observing CLKREQ# de-asserts.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: If121b5cb534eb32bac8992683c3f0eee8946acec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change drops the function `find_gfx_dev()` as it is unused now.
Change-Id: Ie42707bd45348dc7485ca0ca12ebff2994897e6b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add two properties (maxim, vmon-slot-no/maxim, imon-slot-no) in maxim9839 driver.
This is I/V source destination definition that from below properties .
maxim,vmon-slot-no => PCM_IVADC_V_DEST
maxim,imon-slot-no => PCM_IVADC_I_DEST
BUG=b:197076844
TEST=build and check SSDT
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Idb24d19c7cfea559bf6d53f401d66cadb8b3acc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This include provides the definition of enum cb_err.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idfee720de920377796e3fd64cb47514b8cb08c34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
smp_processor_id is defined in src/arch/arm64/include/armv8/arch/cpu.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b610189bf439774cb900f74559dee314cbc5854
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add mipi panel support for wormdingler
- Add the following panel for wormdingler:
INX P110ZZD-DF0
BOE TV110C9M-LL0
- Use panel_id to distinguish which mipi panel to use.
- Setup panel orientation
BUG=b:195898400,b:198548221
BRANCH=none
TEST=emerge-strongbad coreboot
Change-Id: I8cd28e024ecbfdcd473bc39efb529eb4aca1b5d0
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
FspMultiPhaseSiInit API was introduced with FSP 2.2 specification
onwards. EnableMultiPhaseSiliconInit is an arch UPD also introduced
as part of FSP 2.2 specification to allow calling FspMultiPhaseSiInit
API.
However, some platforms adhere to the FSP specification but
don't have arch UPD structure, for example : JSL, TGL and Xeon-SP.
Out of these platforms, TGL supports calling of FspMultiPhaseSiInit
API and considered EnableMultiPhaseSiliconInit as a platform-specific
UPD rather than an arch UPD to allow calling into FspMultiPhaseSiInit
API.
It is important to ensure that the UPD setting and the callback for
MultiPhaseInit are kept in sync, else it could result in broken
behavior e.g. a hang is seen in FSP if EnableMultiPhaseSiliconInit
UPD is set to 1 but the FspMultiPhaseSiInit API call is skipped.
This patch provides an option for users to choose to bypass calling
into MultiPhaseSiInit API and ensures the EnableMultiPhaseSiliconInit
UPD is set to its default state as `disable` so that FSP-S don't
consider MultiPhaseSiInit API is a mandatory entry point prior to
calling other FSP API entry points.
List of changes:
1. Add `FSPS_HAS_ARCH_UPD` Kconfig for SoC to select if
`FSPS_ARCH_UPD` structure is part of `FSPS_UPD` structure.
2. Drop `soc_fsp_multi_phase_init_is_enable()` from JSL and Xeon-SP
SoCs, a SoC override to callout that SoC doesn't support calling
MultiPhase Si Init is no longer required.
3. Add `FSPS_USE_MULTI_PHASE_INIT` Kconfig for SoC to specify if
SoC users want to enable `EnableMultiPhaseSiliconInit` arch UPD (using
`fsp_fill_common_arch_params()`) and execute FspMultiPhaseSiInit() API.
4. Presently selects `FSPS_USE_MULTI_PHASE_INIT` from IA TCSS common
code.
5. Add `fsp_is_multi_phase_init_enabled()` that check applicability of
MultiPhase Si Init prior calling FspMultiPhaseSiInit() API to
honor SoC users' decision.
6. Drop `arch_silicon_init_params()` from SoC as FSP driver (FSP 2.2)
would check the applicability of MultiPhase Si Init prior calling
FspMultiPhaseSiInit() API.
Additionally, selects FSPS_HAS_ARCH_UPD for Alder Lake as Alder Lake
FSPS_UPD structure has `FSPS_ARCH_UPD` structure and drops
`arch_silicon_init_params()` from SoC
`platform_fsp_silicon_init_params_cb()`.
Skip EnableMultiPhaseSiliconInit hardcoding for Tiger Lake and uses
the fsp_is_multi_phase_init_enabled() function to override
EnableMultiPhaseSiliconInit UPD prior calling MultiPhaseSiInit FSP API.
TEST=EnableMultiPhaseSiliconInit UPD is getting set or reset based on
SoC user selects FSPS_USE_MULTI_PHASE_INIT Kconfig.
Change-Id: I019fa8364605f5061d56e2d80b20e1a91857c423
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of always passing LB_FB_ORIENTATION_NORMAL, allow the chipsets
implementing the callback to pass in an orientation.
BUG=b:194967458
BRANCH=dedede
Change-Id: I4aacab9449930a75aca9d68bf30d019f86035405
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Maxim driver look for "maxim,dsm_param_name" to load dsm parameter file.
dsm param file name consist of {dsm_param_file_name} filled in devicetree,
{MAINBOARD_VENDOR} and {MAINBOARD_PART_NUMBER}.
=> {dsm_param_file_name}_{MAINBOARD_VENDOR}_{MAINBOARD_PART_NUMBER}.bin
BUG=b:197076844
TEST=build, and check ssdt
Change-Id: I006572d6a6ea55298374c688dfd9d877835da82d
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The call to the `get_smbios_data` device operation is followed by
calls to unconditional default functions, which lacks flexibility.
Instead, have devices that implement `get_smbios_data` call these
default functions as needed.
Most `get_smbios_data` implementations are in mainboard code, and are
bound to the root device. The default functions only operate with PCI
devices because of the `dev->path.type != DEVICE_PATH_PCI` checks, so
calling these functions for non-PCI devices is unnecessary. QEMU also
implements `get_smbios_data` but binds it to the domain device, which
isn't PCI either.
Change-Id: Iefbf072b1203d04a98c9d26a30f22cfebe769eb4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
...because I just spent hours chasing a refactoring bug that would have
been way more obvious with a little more error transparency in here.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3354ff0370ae79f05e5c37d292ac16d446898606
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The MIPI source video data has a large variation (e.g. 59Hz ~ 61Hz),
anx7625 defines K ratio for matching MIPI input video clock and
DP output video clock. A bigger k value can match a bigger video data
variation. IVO panel has smaller variation than DP CTS spec, so decrease
k value to 0x3b.
BUG=b:194659777
BRANCH=none
TEST=Display is normal on Asurada
Change-Id: If3a09811999babda45e9a9a559dd447920109204
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Our MIPI panel initialization framework differentiates between DCS and
GENERIC commands, but the exact interpretation of those terms is left to
the platform drivers. In practice, the MIPI DSI transaction codes for
these are standardized and platforms always need to do the same
operation of combining the command length and transfer type into a
correct DSI protocol code. This patch factors out the various
platform-specific DSI protocol definitions into a single global one and
moves the transaction type calculation into the common panel framework.
The Qualcomm SC7180 implementation which previously only supported DCS
commands is enhanced to (hopefully? untested for now...) also support
GENERIC commands. While we're rewriting that whole section also fix some
other issues about how exactly long and short commands need to be passed
to that hardware which we identified in the meantime.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I09ade7857ca04e89d286cf538b1a5ebb1eeb8c04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Moves MAX_EVENT_SIZE to commonlib/bsd/include, and renames it
ELOG_MAX_EVENT_SIZE to give it an "scoped" name.
The moving is needed because this defined will be used from
util/cbfstool (see next CL in the chain).
BUG=b:172210863
TEST=compiles Ok
Change-Id: I86b06d257dda5b325a8478a044045b2a63fb1a84
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
As per the connectivity document deny list entry size should be uint16
559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf
Fixes: cc50770cd0("wifi: Add support for wifi time average SAR config")
Change-Id: I045c21350cf4c2266df108eede6350d090322ba0
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Retype loop variable `i` to `uint32_t` for consistency with the types of
the `number_of_phases` and `phase_index` struct fields and the parameter
of the `platform_fsp_multi_phase_init_cb()` function.
Change-Id: I82916f33c2dc5dab6a31111c9acba2a18a5cfb0b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57491
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Platforms that rely on the FSP for parts of the hardware initialization
likely won't boot successfully when no FSP binaries are added during the
build, so print a warning at the end of the build in this case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Suggested-by: Martin Roth <martinroth@google.com>
Change-Id: I6efc184ecc4059818474937fd31574f703c9bdc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add new thermal control mechanism for pch device under dptf driver.
This provides support of different control knobs for FIVR.
BUG=b:198582766
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: I035d2844b9ba6a9532ae006fc1c43e34cb94328a
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Error out when the FSP binaries that are supposed to be added aren't
specified.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ie5f2d75d066f0b4e491e9c8420b7a0cbd4ba9e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Make adding the FSP-T file to CBFS depend on both ADD_FSP_BINARIES and
FSP_CAR Kconfig options being set. The FSP_T_FILE Kconfig option depends
on both, so also check if both are selected in the Makefile where it
tries to add the FSP-T to the CBFS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id347336f2751c6d871f31d89c30a1222037c2d69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add support for DSM methods as per the connectivity document
559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf
BUG=b:191720858
TEST=Check the generated SSDT tables for DSM methods
Change-Id: Ie154edf188531fe6c260274edaa694cf3b3605d3
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add support for the WTAS ACPI BIOS configuration table as per the
connectivity document:
559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf
BUG=b:193665559
TEST=Generated SAR file with the WTAS related configuration values and
verified that the SSDT has the WTAS ACPI table.
Change-Id: I42cf3cba7974e6db0e05de30846ef103a15fd584
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add support for the PPAG ACPI BIOS configuration table as per the
connectivity document:
559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf
BUG=b:193665559
TEST=Generated SAR file with the PPAG related configuration values and
verified that the SSDT has the PPAG ACPI table.
Change-Id: Ie8d25113feeeb4a4242cfd7d72a5091d2d5fb389
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Existing SAR infrastructure supports only revision 0 of the SAR tables.
This patch modifies it to extend support for intel wifi 6 and wifi 6e
configurations as per the connectivity document:
559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf
The SAR table and WGDS configuration block sizes were static in the
legacy SAR file format. Following is the format of the new binary file.
+------------------------------------------------------------+
| Field | Size | Description |
+------------------------------------------------------------+
| Marker | 4 bytes | "$SAR" |
+------------------------------------------------------------+
| Version | 1 byte | Current version = 1 |
+------------------------------------------------------------+
| SAR table | 2 bytes | Offset of SAR table from start of |
| offset | | the header |
+------------------------------------------------------------+
| WGDS | 2 bytes | Offset of WGDS table from start of |
| offset | | the header |
+------------------------------------------------------------+
| Data | n bytes | Data for the different tables |
+------------------------------------------------------------+
This change supports both the legacy and the new format of SAR file
BUG=b:193665559
TEST=Checked the SSDT entries for WRDS, EWRD and WGDS with different
binaries generated by setting different versions in the config.star
Change-Id: I08c3f321938eba04e8bcff4d87cb215422715bb2
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
It doesn't make sense to store the orientation field directly in the
panel information structure, which is supposed to be reuseable between
different boards. The thing that determines orientation is how that
panel is built into the board in question, which only the board itself
can know. The same portrait panel could be rotated left to be used as
landscape in one board and rotated right to be used as landscape in
another. This patch moves the orientation field out of the panel
structure back into the mainboards to reflect this.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If2b716aa4dae036515730c12961fdd8a9ac34753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57324
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Braswell this is done in the bootblock before C code is executed.
Change-Id: I72c7b821e04169ae237d8adb6a8348f06e87b047
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
This CL indroduces the ELOG_RW_REGION_NAME. This constant replaced the
hardcoded "RW_ELOG" value. This constant will be used also by elogtool
(see CL in the commit chain).
BUG=b:172210863
Change-Id: Ie8d31204e65fd67d52b0f8ced7b8c1ffdcf5b539
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56986
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit moves some drivers/elog/ functionality to commonlib/bsd
since they will be called from util/cbfstool/.
In particular:
* elog_fill_timestamp(), elog_update_checksum(), elog_checksum_event()
were moved to commonlib/bsd/elog
* elog_fill_timestamp() receives the time parameters and updates the
event based on the "time" arguments.
The original elog_*() functions were written by Duncan Laurie
(see CB:1311) and he gave permission to re-license the code to BSD.
BUG=b:172210863
Change-Id: I67d5ad6e7c4d486b3d4ebb25be77998173cee5a9
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Rename soc_validate_fsp_version to soc_validate_fspm_header, since it
can not only be used to check the version info in the FSP-M binary's
header, but also to check every other field in the binary's header. This
is a preparation for a follow-up patch that implements this function to
check the FSP-M binary's size.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ifadcfd1869bea0774dc17b69c5d1e1c241a45de1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Sounds like we prefer to have this under drivers/ instead of device/.
Also move all MIPI-related headers out from device/ into their own
directory.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ib3e66954b8f0cf85b28d8d186b09d7846707559d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move bcd2bin() / bin2bcd() functions to commonlib/bsd/include/
Also, the license is changed from GPL to BSD.
This is because it is needed from "utils" (see CL in the chain).
For reference bin2bcd() & bcd2bin() are very simple functions.
There are already BSD implementations, like these ones (just to
name a few):
https://chromium.googlesource.com/chromiumos/platform/mosys/+/refs/heads/main/include/lib/math.h#67
http://web.mit.edu/freebsd/head/sys/contrib/octeon-sdk/cvmx-cn3010-evb-hs5.c
BUG=b:172210863
TEST=make (everything compiled Ok).
Change-Id: If2eba82da35838799bcbcf38303de6bd53f7eb72
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56904
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add TGL-H PCI IDs from the Processor and PCH EDS docs.
Reference:
- Intel doc 615985
- Intel doc 575683
Change-Id: I751d0d59aff9e93e2aa92546db78775bd1e6ef22
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC1019 will use the ACPI compatible and share the same driver with
ALC1015. Add HID to support more compatible ICs.
BUG=b:195891240
TEST=ALC1019P driver can probe properly.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3e98297f3a39048b24d61e61ca95c60cd2037eb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In order to support wake from D3cold, most devices require extra
circuitry and possibly out-of-band communications to the host.
Therefore, assume that most UARTs that do have wake capabilities support
wake from D3hot rather than D3cold.
BUG=b:187228954
TEST=compile
Change-Id: I24d6d0e81d980fc9c910d8f47f557c88990b6400
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to support wake from D3cold, most devices require extra
circuitry and possibly out-of-band communications to the host.
Therefore, assume that most SPI peripherals that do have wake
capabilities support wake from D3hot rather than D3cold.
This also allows coreboot to expose a power resource to perform power
sequencing for a SPI peripheral that is intended to retain power in
S3/S0ix.
If support for a device with d3cold wake support is needed, it could be
added in later as an option.
BUG=b:187228954
TEST=compile
Change-Id: I1d739b49c1a43007eb0199fe39b3b7d7375e6577
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The DA7219 does not support wake from D3cold, therefore update the
return value of _S0W from D3cold to D3hot.
BUG=b:187228954
TEST=compile
Change-Id: If03f83bb00ec90a2a6646d2c99d8bcc7e5533ac2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move elog_internal.h to commonlib/bsd/include/bsd/.
And rename it from elog_internal.h to elog.h.
Since this file will be included from util/ it also converts the "uNN"
types into "uintNN_t" types.
The two defines that are not used by util/ are moved to
drivers/elog/elog.c, the only file that includes them.
Move also the function elog_verify_header() from drivers/elog/, to
commonlib/bsd/elog.c since this function will be called from util/
as well.
The rationale behind moving elog's defines & structs to
commonlib/bsd/include is to make them available to util/ tools and/or
payloads (should it be needed in the future).
The files that are being relicensed to BSD were coded by Duncan Laurie,
and he is Ok with the relicense.
BUG=b:172210863
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Change-Id: Ia1aefea705ddd417a1d9e978bb18ab6d9a60cad6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This is in preparation for migrating EDK2 to more recent version(s). In
EDK2 repo commit f2cdb268ef appended an additional field to FSP 2.0
header (FspMultiPhaseSiInitEntryOffset). This increases the length of
the header from 72 to 76. Instead of checking for exact length check
reported header length against known minimum length for a given FSP
version.
BUG=b:180186886
TEST=build/boot with both header flavors
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Change-Id: Ie8422447b2cff0a6c536e13014905ffa15c70586
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56190
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the bus master bit only if the global Kconfig switch
PCI_ALLOW_BUS_MASTER_ANY_DEVICE is enabled. For now the bus master bit
is needed for i210 because of some old OS drivers that do not set it
and won't work properly without it.
Change-Id: I6f727e7f513f4320740fbf49e741cea86edb3247
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This legacy alt-century byte sits amidst CMOS and conflicts many option
tables. It usually has no meaning to the hardware and needs to be main-
tained manually. Let's disable its usage by default if the CMOS option
table is enabled.
Change-Id: Ifba3d77120c2474393ac5e64faac1baeeb58c893
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Update proper number of sectors info for winbond W25Q512NW-IM chip
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: I12a22321bb9180e32cd47faa6ac3960ba5b2dfb8
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56038
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Define new configs for Opregion versions.
2. Assign RVDA to relative address of the Opregion buffer
in case of opregion 2.1+.
BUG=b:190019970
BRANCH=None
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I95a9f3df185002a4e38faa910f867ace0b97ac2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Fast Read Dual Output and Fast Read Dual I/O commands are
practically identical, the only difference being how the read address is
transferred (saving a whooping 2 bytes which is totally irrelevant for
the amounts of data coreboot tends to read). We originally implemented
Fast Read Dual Output since it's the older command and some older
Winbond chips only supported that one... but it seems that some older
Macronix parts for whatever reason chose to only support Fast Read Dual
I/O instead. So in order to make this work for as many parts as
possible, I guess we'll have to implement both. (Also, the Macronix
device ID situation is utter madness with different chips with different
capabilities often having the same ID, so we basically have to make a
best-effort guess to strike a trade-off between fast speeds and best
chance at supporting all chips. If this turns out to be a problem later,
we may have to add Kconfig overrides for this or resort to SFDP parsing,
although that would defeat the whole point of trying to be fast.)
BUG=b:193486682
TEST=Booted CoachZ (with Dual I/O)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia1a20581f251615127f132eadea367b7b66c4709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Define a structure for opregion version information to align
with spec/kernel.
BUG=b:190019970
BRANCH=None
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I93a9f2df186002a4e38caa910f867bce0b97ac2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Do not dereference a pointer before checking whether it is NULL.
Change-Id: Icbe9ae99d91fd587d8e56cf3a0dcb59834ee6d07
Found-by: Coverity CID 1458232
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56266
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A regular assignment works just as well and also allows type-checking.
It also avoids a common mistake where `sizeof` is applied to a pointer
to obtain the size of the data it points to, without dereferencing it.
Found-by: Coverity CID 1458231
Change-Id: I7ed05322c3c911f3da4145f81e4d9760a275fec2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56265
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since initial_lapicid() returns an unsigned int, change the type of the
local variables the return value gets assigned to to unsigned int as
well if applicable. Also change the printk format strings for printing
the variable's contents to %u where it was %d before.
Change-Id: I289015b81b2a9d915c4cab9b0544fc19b85df7a3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55063
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit ce0e2a014009390c4527e064efb59260ef4d3a3b which was
originally introduced as a workaround for the bug that the Linux kernel
doesn't know what to do with type 16 memory region in the e820 table
where CBMEM resides and disallowed accessing it. After depthcharge was
patched to mark the type 16 region as a normal reserved region, the
Linux kernel now can access the BERT region and print BERT errors. When
SeaBIOS was used as payload it already marked the memory region
correctly, so it already worked in that case.
After commit 8c3a8df1021b8a2789c2a285557401837f9fc2b8 that removed the
usage of the BERT memory region reserved by the FSP driver by the AMD
Picasso and Cezanne SoCs and made them use CBMEM for the BERT region,
no other SoC code uses this functionality. The Intel Alderlake and
Tigerlake SoCs put the BERT region in CBMEM and never used this reserved
memory region and the change for the Intel server CPU to use this was
abandoned and never landed in upstream coreboot. AMD Stoneyridge is the
only other SoC/chipset that selects ACPI_BERT, but since it doesn't
select or use the FSP driver, it also won't be affected by this change.
TEST=Behavior of the BERT code doesn't change on Mandolin
Change-Id: I6ca095ca327cbf925edb59b89fff42ff9f96de5d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56163
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we get PLD information from USB port structure itself, so
devicetree does not need to fill PLD structure anymore. Thus remove
obsolete variable.
Change-Id: I7a561677ab65ddb870d1b00b35ee9d7a22ef9c70
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since TBT controller can have maximum 2 ports per controller, our
code will loop over DFP structure twice and determine port number.
Retimer driver used to assign port number as below:
1. Check if power GPIO is assigned for particular DFP entry or not
2. If entry is there, assign loop count as port number
Since loop count is 2, retimer will never assign port number = 2
even if it's present. In case of more than 1 controller, port number
assigned will still be 0 or 1 even though actual port index might
be 2 or 3. This will create an issue where even if you do transaction
on device on controller 2 (port index 2 or 3), EC will route it on
port 0 or 1 due to incorrect port index.
Update the driver flow as per below to handle this scenario:
1. Check if power GPIO is assigned for particular DFP entry or not
2. Get USB port number from config since it's stored in usb port
information under devicetree
3. Pass the port number to ACPI SSDT and EC code
Above changes will ensure that we're assigning correct port
number as per calculation and EC will use correct port index.
BUG=b:189476816
BRANCH=None
TEST=Checked that retimer firmware update works on both ports and update
happens on correct port index.
Change-Id: Ib11637ae39046e0afdacd33bc34e8a59e6f2bfb1
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create a separate function to get PLD information from USB device.
This is helpful in retimer driver where we can attach same USB
port information to retimer instance and we can avoid duplication
of information.
BUG=None
BRANCH=None
TEST=Check if code compiles and function returns correct value
Change-Id: Iaaf140ce1965dce3a812aa2701ce0e29b34ab3e7
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add IMOK method support for DPTF
BRANCH=None
BUG=b:187797417
TEST=Built and tested on dedede board
Change-Id: I8edfa3bcaa6bde0b9690fcace000cd582dcc81d2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This message is not an error, but just informational.
BUG=none
TEST=Boot with CONSOLE_LOGLEVEL_3 and no longer see it printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb64edbe029cafa82aec99aa50de47f51cd50dce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Currently the flow for opregion init is as below:
1. Allocate memory for opregion first (cbmem_add(opregion))
2. Check if VBT size > 6 KiB (this requires extended VBT support)
3. In case of extended VBT requirement, we allocate another chunk
of memory which is equal to size of VBT (cbmem_add(extended_vbt))
4. Pass physical address pointer to OS via RVDA
We can optimize the above flow to allocate single chunk of memory by
checking VBT size in earlier step. The new optimized flow for opregion
init is as below:
1. Check if VBT size > 6 KiB (this requires extended VBT support)
2. In case of extended VBT requirement, total memory to be allocated
is calculated as sizeof(opregion) + sizeof (extended_vbt)
In case where VBT size is < 6 KiB, total memory requirement would
be equal to sizeof(opregion)
3. Based on above calculation, allocate single chunk of memory based on
total size.
This will also be helpful for the case of virtualization where guest
users don't have access to physical address and when it needs relative
address of VBT compared to absolute address.
In case of opregion 2.1 spec, we need to pass relative address of
VBT from opregion base in RVDA. This optimization will help in meeting
this requirement since relative address of extended VBT is easy to get.
This change will ensure that it meets opregion specification
requirement and will be compatible with future versions as well.
BUG=b:190019970
BRANCH=None
TEST=check the address of extended VBT region and address is coming
correctly.
Change-Id: Ic0e255df63145409096b0b9312c6c51c05f49931
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This adds OEM variables feature under DPTF as per BWG doc #541817. Using
this, platform vendors can expose an array of OEM-specific values as OEM
variables to be used in determining DPTF policy. These are obtained via
the ODVP method, and then simply exposed under sysfs. In addition, these
gets updated when a notification is received or when the DPTF policy is
changed by userspace.
BRANCH=None
BUG=b:187253038
TEST=Built and tested on dedede board
Change-Id: Iaf3cf7b40e9a441b41d0c659d76895a58669c2fb
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Now that the refactoring is complete, the unions for the table header
are no longer needed. Therefore, drop them.
Change-Id: I4e170e84a12646386d3fd84ae973dd6c18f25809
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce the `smbios_full_table_len` function to consolidate table
length calculation. The case where the length of a table equals the
length of the structure happens when a table has no strings.
Change-Id: Ibc60075e82eb66b5d0b7132b16da000b153413f9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Factor out some boilerplate code into a helper `smbios_carve_table`
function, which zeroes out the table memory and fills in the header
fields common to all tables.
Change-Id: Iece2f64f9151d3c79813f6264dfb3a92d98c2035
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
All SMBIOS `type X` tables start with the same 4-byte header. Add a
struct definition for it, and use it where applicable. The union is
temporary and allows doing the necessary changes in smaller commits.
Change-Id: Ibd9a80010f83fd7ebefc014b981d430f5723808c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Where applicable, use the size of the associated variable.
Change-Id: Ibbac2a82893232a6f87182a6a965b84a599d633e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Where applicable, use the size of the associated variable.
Change-Id: Icf4f1c8fe9f54c44b041a65eb46d6ec9f9fd6367
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
gpio_num is used to indicate the GPIO which is taken from gpio_soc_defs.h file.
Support for dynamic generation of ASL file for Camera was added for JSL
when there were less than 256 GPIOs. ADL now has more GPIOs and therefore
uint8_t is not enough any more
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I0a5fdb612c8cf689d356af8591b9ad101360c25d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55538
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FSP_ARRAY_LOAD macro for checking and loading
array type configs into array type UPDs to increase readability.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I307340a2bfc0a54f2ab7241af2f24dfbf8bb111d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55559
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 926949d64c1d8ef49dcc6774dd8535a2cb1fd423 (drivers/intel/gma:
Restructure IGD opregion init code) accidentally dropped this print
statement. As it can be useful for debugging purposes, add it back.
Change-Id: Iebd9e02bccc77538c0eed1e549294408586322f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55567
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes unnecessary __packed attribute from the structure
defined in chip.h
BUG=None
TEST=Tested WFC camera on Brya
Change-Id: I1174606cd22cd353f01d865d0c25bb6f8f8de055
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55566
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
APIC Serial Bus pins were removed with ICH5 already, so a choice
'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG
0x3 is also not documented since ICH5.
For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was
wrong and ignored as BOOT_CONFIG register emulation was never implemented.
For ICH4 and earlier, the choice to use FSB can be made based on the
installed CPU model but this is now just hardwired to match P4 CPUs of
aopen/dxplplusu.
For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined
and the only possible operation mode there is APIC Serial Bus, which
requires no configuration.
Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Restructuring opregion VBT related code to make it more generalize
for future revision of opregion spec.
Moved logic to locate VBT from different region (CBMEM, PCI option
ROM or VBIOS) into separate function.
Created a new function to check if extended VBT region is required.
This will be helpful in the subsequent changes to determine if
extended VBT region is needed and handle memory allocation
accordingly.
BUG=None
BRANCH=None
TEST=check the address of extended VBT region and address is coming
correctly.
Change-Id: I479d57cd326567192a3cd1969f8125ffe1934399
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Added winbond W25Q512NW chip details.
Change-Id: I5545c9431891f7fa74c1527591fb7c3cd3aba687
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The loads of the FSPM and FSPS binaries are not insignificant amounts of
time, and without these timestamps, it's not clear what's going on in
those time blocks. For FSPM, the timestamps can run together to make it
look like that time is still part of the romstage init time.
Example:
6:end of verified boot 387,390 (5,402)
13:starting to load romstage 401,931 (14,541)
14:finished loading romstage 420,560 (18,629)
970:loading FSP-M 450,698 (30,138)
15:starting LZMA decompress (ignore for x86) 464,173 (13,475)
16:finished LZMA decompress (ignore for x86) 517,860 (53,687)
...
9:finished loading ramstage 737,191 (18,377)
10:start of ramstage 757,584 (20,393)
30:device enumeration 790,382 (32,798)
971:loading FSP-S 840,186 (49,804)
15:starting LZMA decompress (ignore for x86) 853,834 (13,648)
16:finished LZMA decompress (ignore for x86) 888,830 (34,996)
BUG=b:188981986
TEST=Build & Boot guybrush, look at timestamps.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I5796d4cdd512799c2eafee45a8ef561de5258b91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ibfaf6693288005463e45831fe100a5052e97cf2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55185
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver was inspired from soc/intel/common/block/pci/rtd3. I decided
to copy and modify it because the Intel driver has a lot of Intel
specific code.
This driver has been stripped down to only provide a power resource and
set the StorageD3Enable property. This driver is SoC agnostic and does
not handle suspending the actual PCIe root port. That should be
implemented by an SoC specific driver.
This is required for Guybrush to suspend/resume properly because the
NVMe power is tied to the S0 power rails, so the kernel needs to place
the device into D3.
BUG=b:184617186
TEST=Guybrush is able to suspend/resume properly. Also see power
resource get enabled / disabled.
[ 56.075559] power-0416 __acpi_power_off : Power resource [RTD3] turned off
[ 56.075562] device_pm-0279 device_set_power : Device [PXSX] transitioned to D3cold
[ 56.075567] pci_pm_suspend_noirq: nvme 0000:02:00.0: PCI PM: Suspend power state: D3cold
[ 56.075569] nvme 0000:02:00.0: pci_pm_suspend_noirq+0x0/0x413 returned 0 after 15978 usecs
[ 123.464874] nvme 0000:02:00.0: calling pci_pm_resume_noirq+0x0/0x11d @ 7, parent: 0000:00:02.4
[ 123.464891] acpi_device_set_power: ACPI: \_SB_.PCI0.GP14.PXSX: Power state change: D3cold -> D0
[ 123.464982] power-0360 __acpi_power_on : Power resource [RTD3] turned on
[ 123.464984] device_pm-0279 device_set_power : Device [PXSX] transitioned to D0
[ 123.465039] nvme 0000:02:00.0: pci_pm_resume_noirq+0x0/0x11d returned 0 after 158 usecs
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2adfc925183ff7a19ab97e89212bc87c40d552d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tianocore UEFIPAYLOAD now supports SMMSTORE V2, so enable it by default
Change-Id: I33582427fe9d3fc7c15014d3a04fcdc533cb1ac8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Since the OS provides its own driver for the I2C controller it can
choose to use a bus speed other than the one used at coreboot runtime.
In this case it would be good to provide a way how the needed bus
timings are communicated to the OS, since these are very board-specific
and there is no way that the OS can know them other than read the
appropriate ACPI reported timings.
This patch adds some code to report additional bus speed timings if
there are some defined in the devicetree.
Change-Id: If921e0613864660dc1bb8d7c1b30fb9db8ac655d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
As per the comments in CB:54090 mainboard api
mainboard_tcss_get_port_info() is simplified and moved to tcss common
block code.
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com>
Change-Id: I7894363df4862f7cfe733d93e6160677fb8a9e31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This will be used to pass information to driver through ACPI in devicetree.
Example https://review.coreboot.org/c/coreboot/+/52013
register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
TEST=Add these macros in devicetree, build and check static.c for consistency
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.corp-partner.google.com>
Change-Id: Ia4137e09c934bf06857ceedb933e616bed5070dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55097
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are cases where the RTC_VRT bit in register D stays set after a
power failure while the real date and time registers can contain rubbish
values (can happen when RTC is not buffered). If we do not detect this
invalid date and/or time here and keep it, Linux will use these bad
values for the initial timekeeper init. This in turn can lead to dates
before 1970 in user land which can break a lot assumptions.
To fix this, check date and time sanity when the RTC is initialized and
reset the values if needed.
Change-Id: I5bc600c78bab50c70372600347f63156df127012
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54914
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In commit b64db833d6 a basic ACPI support was added to the driver.
With this support an SSDT-entry is created for this RTC and it is now
visible to the OS via ACPI. In Linux the PNP-devices, which are
reported over ACPI, are scanned rather early and if the entry is found,
the device is claimed even if there is no driver available yet.
In this case, when the native RTC-driver without ACPI-support is loaded
and tries to register this device, the RTC is already blocked by the
PNP-drivers and cannot be used anymore. This leads to a non-usable RTC
on kernels where the needed ACPI-extension is not yet merged into the
RTC driver.
This patch provides a way to disable the ACPI-support for the RTC if
needed.
Change-Id: Ic65794d409d13a78d17275c86ec14ee6f04cd2a6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55003
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54b296563940cd46fe9da9fe789b746f2fc1987d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
fsp_temp_ram_exit() function is only getting called by
late_car_teardown() function inside temp_ram_exit.c file.
Hence, make function as static and removed from include/fsp/api.h.
Change-Id: I2239400e475482bc21f771d41a5ac524222d40fc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The only FSP 1.1 platform is Braswell. Drop unnecessary functions which
only have a weak stub definition.
Change-Id: Ie60213e5a6ae67bd8b982ee505f4b512253577c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The only FSP 1.1 platform is Braswell, which has a non-weak definition
for the `soc_silicon_init_params` function. This changes the resulting
BUILD_TIMELESS=1 coreboot image for Facebook fbg1701, for some reason.
Change-Id: I2a1b51cda9eb21d7af8372c16a43195a4bdd9543
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The only FSP 1.1 platform is Braswell. Drop unused weak definitions for
functions where a non-weak definition always exists.
Tested with BUILD_TIMELESS=1, Facebook fbg1701 remains identical.
Change-Id: Ifaf40a1cd661b123911fbeaafeb2b7002559a435
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Commit 736a1028fbaef97d32221cadb1f512c9a8960a76 (drivers/intel/fsp1_1:
Drop dead MMA code) dropped FSP 1.1 MMA code, but missed a few things.
Change-Id: I556e7125eff21c49609bb1e5e1f23e99e692756f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
No board uses AMD PI 00630F01, so drop it. And drop a single reference
to the now-removed `NORTHBRIDGE_AMD_PI_00630F01` Kconfig option inside
the `drivers/amd/agesa/acpi_tables.c` file.
Change-Id: Ibc45a4a6041220ed22273c1d41f9b796e1acb901
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54897
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Defined as TPM1 || TPM2.
Change-Id: I18c26d6991c2ccf782a515a8e90a3eb82b53b0e6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Prepare to allow using other backends to store options.
Change-Id: I3f838d27bf476207c6dc8f2c1f15c3fa9ae47d87
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Added SW_MUTE_DEVICE event type for mic mute switch.
BUG=b:184593945
BRANCH=puff
TEST=build image and verify with evtest on puff:
/dev/input/event3: mic_mute_switch
UI event_device_info receives the proper name.
Change-Id: I09c52dc3df63e266c73741b102a22f8a2b896791
Signed-off-by: Ben Zhang <benzh@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Added the label field to the gpio_keys _DSD so that the kernel driver
can use a meaningful name instead of the generic _HID PRP0001.
BUG=b:184593945
BRANCH=puff
TEST=build image and verify with evtest on puff:
/dev/input/event3: mic_mute_switch
UI event_device_info receives the proper name.
Change-Id: I0377851b9cf23bab31930aed6e7de91b4ac3505b
Signed-off-by: Ben Zhang <benzh@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Given the following device tree entry:
chip drivers/acpi/thermal_zone
register "description" = ""CPU""
use chrome_ec as temperature_controller
register "sensor_id" = "0"
register "polling_period" = "10"
register "critical_temperature" = "91"
register "passive_config" = "{
.temperature = 85,
}"
register "use_acpi1_thermal_zone_scope" = "true"
device generic 0 on end
end
It will generate the following:
Scope (\_TZ)
{
ThermalZone (TM00)
{
Name (_STR, "CPU") // _STR: Description String
Name (_RTV, Zero) // _RTV: Relative Temperature Values
Name (_TZP, 0x64) // _TZP: Thermal Zone Polling
Name (_CRT, 0x0E39) // _CRT: Critical Temperature
Name (_PSV, 0x0DFD) // _PSV: Passive Temperature
Name (_PSL, Package (0x10) // _PSL: Passive List
{
\_SB.CP00,
\_SB.CP01,
\_SB.CP02,
\_SB.CP03,
\_SB.CP04,
\_SB.CP05,
\_SB.CP06,
\_SB.CP07,
\_SB.CP08,
\_SB.CP09,
})
Name (_TC1, 0x02) // _TC1: Thermal Constant 1
Name (_TC2, 0x05) // _TC2: Thermal Constant 2
Name (_TSP, 0x14) // _TSP: Thermal Sampling Period
Method (_TMP, 0, Serialized) // _TMP: Temperature
{
Return (\_SB.PCI0.LPCB.EC0.CREC.TMP (Zero))
}
}
}
BUG=b:186166365
TEST=Boot guybrush to OS and verify thermal zone works
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iee2a42db749f18eef6c3f73cdbb3441567301e5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Along with upstream kernel for Retimer firmware upgrade, coreboot
provides DFPx under host router where each DFP has its PLD and DSM. The
DFPx's functions encapsulates power control through GPIO, PD
suspend/resume and modes setting for Retimer firmware update under NDA
scenario.
BUG=b:186521258
TEST=Booted to kernel and validated host router's DFPx properties after
decomposing SSDT table.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I81bef80729f6df57119f5523358620cb015e5406
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52712
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
HSBIAS_SENSE_EN configures HSBIAS output current sense through
the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
the potential pop noise during the headset plug out slowly. But on some
platforms ESD voltage will affect it causing test to fail, especially
with CTIA headset type. For different hardware setups, a designer might
want to tweak default behavior.
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com>
Change-Id: I87c6f01af1bdb5b1cb8e399191519598d7fbe9ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52981
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Make the FSP notify phases name prior in comments section.
2. Fix discrepancies in FSP notify before and after postcode comments.
3. Add FSP notify postcode macros for after pci enumeration(0xa2)
and ready to boot(0xa3) call.
Change-Id: Ib4c825d5f1f31f80ad2a03ff5d6006daa7104d23
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52894
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add backlight support in sn65dsi86bridge through the AUX channel using
eDP DPCD registers, which is needed on the GOOGLE_HOMESTAR board.
Change-Id: Ie700080f1feabe2d3397c38088a64cff27bfbe55
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52663
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SN65DSI86 eDP bridge supports two ways to read the EDID: for now
we've been using "direct mode", which works by basically making the
bridge I2C device listen to another chip address besides its own and
proxy all requests received there directly to the eDP AUX channel. The
great part about that mode is that it is super easy and hassle-free to
use. The not so great part about it is that it doesn't work: for EDID
extensions, the last byte (which happens to contain the checksum) is
somehow always read as zero. We presume this is a hardware bug in the
bridge part.
The other, much more annoying way is "indirect mode", where each byte
transmitted over the AUX channel has to be manually set up in the I2C
registers of the bridge, just like we're already doing with DPCD
transactions. Thankfully, we can reuse most of the DPCD code for this so
it's not a lot of extra code. It's a bit slower but not as much as you'd
expect (26ms instead of 18ms on my board), and the difference is not
very relevant compared to common total times for display init.
Also, some of the (previously unused) enum definitions for the AUX_CMD
mode field of the bridge had just been plain wrong for some reason, and
needed to be fixed to make this work.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I65f80193380d3c3841f9f5c26897ed672f45e15a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52959
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of the options accessed within coreboot is a string, and there are
no guarantees that the code works as intended with them. Given that the
current option API only supports integers for now, do not try to access
options whose type is 's' (string).
Change-Id: Ib67b126d972c6d55b77ea5ecfb862b4e9c766fe5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The CMOS option system does not support negative integers. Thus, retype
and rename the option API functions to reflect this.
Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
When using a hardware assisted root of trust measurement, like Intel
TXT/CBnT, the TPM init needs to happen inside the bootblock to form a
proper chain of trust.
Change-Id: Ifacba5d9ab19b47968b4f2ed5731ded4aac55022
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51923
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only use case for FSP-T in coreboot is for 'Intel Bootguard'
support at the moment. Bootguard can do verification FSP-T but there
is no verification on whether the FSP found by walkcbfs_asm is the one
actually verified as an IBB by Bootguard. A fixed pointer needs to be
used.
TESTED on OCP/Deltalake, still boots.
Change-Id: I1ec8b238384684dccf39e5da902d426d3a32b9db
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order for short circuit protection and over current protection to work, the
debug mode needs to be turned off.
BUG=b:185749961
TEST=build and test
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: Iacfa3c668a52d1bae15fe82f1c614d0ebd93a957
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
If device is supported as a wake source, _S0W should be set to D3hot.
This ensures that the device is put into D3hot by the OSPM.
Power resource(PRIC) for the device is listed in both _PR0 and _PR3. Thus, it ensures that the OSPM does not turn off power resource when device is put into D0 and D3hot. Hence, it is capable of waking the system from D3hot state. However, if it is put into D3cold, then the power resource is turned off by the OSPM.
The devices we are currently looking at for touchscreen/touchpad
do not really support auxiliary power and so do not support wake from D3cold.
BUG=b:186070097
TEST=build and check device wake state _S0W set to 3 in ssdt table.
Change-Id: I34e4b2350875530d3337be700276bcc4fb1f810a
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
