| Age | Commit message (Collapse) | Author |
|---|
|
Use correct GUID for DmaProperty in ACPI _DSD.
Reference:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Before:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
After:
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
BUG=b:259716145
TEST=Verified the new GUID is reflected in ACPI SSDT at runtime.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I05b8c3bf23cc43863527bc514d9a96096d45003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch provides the functionality to enable downshift on Marvell
PHY. By setting a downshift counter, the PHY is correspondingly often
attempted to establish Gigabit link before the PHY downshifts to the
next highest speed. The range is limited to 8 trials. To activate
downshift, a software reset must follow to take effect.
Change-Id: I4224eab6c1fc13824d53556c80435bc130a13bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69853
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
INTn on Marvell PHY can be routed to LED[2] pin. This setting must be
made via LED Timer Control Register on page 3.
Change-Id: Ida1efbb604c382676b9d13ac8bf14de768f93637
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69433
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Marvel PHY it could be necessary to customize the shown LED status
at the connector. The LED status can be changed via Function Control
Register on page 3.
Link to the Marvell PHY 88E1512 datasheet:
https://web.archive.org/web/20221109080111/https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-phys-transceivers-alaska-88e151x-datasheet.pdf
Change-Id: Ia71c43f4286f9201f03cb759252ebb405ab81904
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This driver enables the usage of an external Marvell PHY 88E1512 which
should be connected to a SOC internal MAC controller. In a first step it
is only the framework of the driver. Functionality will follow with a
second patch.
Change-Id: I24011860caa7bb206770f9779eb34b689293db10
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the logging message prefix to the device name instead of the
device path in order to make the output consistent with other
logging messages in this and other drivers.
Change-Id: Ib63b93d52aad220d17f1f4ee0d47a949933ec26d
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69718
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add ACPI generation callback to the driver after obtaining the
ACPI HID "MCRY3028" for this device from Microcrystal AG (VID: "MCRY").
Also add I2C bus speed field to the device config structure, which
is a required ACPI entry.
BUG=none
TEST=Disassemble the SSDT table and see whether the device entry
"MC28" is generated correctly. Also check whether the RV3028 driver
in Linux (drivers/rtc/rtc-rv-3028.c) is bound correctly after adding
an ACPI match table to it containing the HID. A proper kernel patch
is pending.
Change-Id: I3b8cf5c8dc551439755992ff05b6693e91cc3f21
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Change-Id: I43e6b57477cb4fd2c8ab399e9cc74591b0a44684
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Not all functions that call fsp_print_guid print their output with the
BIOS_SPEW log level, so introduce a new log level parameter so that the
caller of fsp_print_guid can specify which log level fsp_print_guid
should use for printing the GUID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b37afe703f506d4913f95a954368c0eec0f862d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69599
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit b6ebcdfde58a77bea03a67b376401b9f0f3edefb restructured
the DSM implementation which resulted in a regression
and DSM values gets filled with junk values.
This CL fixes this issue and passes the right pointer to the dsm
ids structure.
BUG=b:256938177
TEST=Build, boot Nivviks and check if the DSM values are parsed
correctly in the SSDT dump.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I88782b0b7dde1fca0230472a38628e82dfd9c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69427
Reviewed-by: Haribalaraman Ramasubramanian <haribalaraman.r@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Use the new fsp_hob_iterator_get_next_guid_extension function in
fsp_find_extension_hob_by_guid instead of iterating through the HOB list
in this function.
TEST=AMD_FSP_DMI_HOB is still found and the same type 17 DMI info is
printed on the console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d4ce14c8a5494763de3f65ed049f98a768c40a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Drop the find_resource_hob_by_guid implementation and use the new
fsp_hob_iterator_init and fsp_hob_iterator_get_next_guid_resource
functions in fsp_find_range_hob.
TEST=Mandolin still finds the TSEG range HOB and uses the correct TSEG
location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00786cbeea203fba195ddc953c3242be544a7d70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Introduce iterator function to go through the HOBs that will be used in
follow-up commits both from the rest of the common FSP HOB access code
and from SoC-specific code that needs to access specific HOBs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If86dde2a9f41d0ca7941493a92f11b91a77e2ae0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This disables MP table generation for the affected boards
since interrupt routing entries would now be completely missing.
The mechanism itself is flawed and redundant. The mapping
of integrated PCI devices' INTx pins to IOAPIC pins is
dependent of configuration registers and needs not appear
in the devicetree.cb files at all.
The write_smp_table implementation would skip writing
any entry delivering to destination IOAPIC ID 0. This
does not follow MP table specification.
There were duplicate calls to register_new_ioapic_gsi0(),
with another present under southbridge LPC device.
Change-Id: I383d55ba2bc0800423617215e0bfdfad5136e9ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69488
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fix the following warning:
error: use of logical '&&' with constant operand
[-Werror,-Wconstant-logical-operand]
Change-Id: I9a2f03a0e05088a780ce1e829859421b461032ca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69437
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Since the characters per line limit was increased from 80 to 96, some
line breaks can be removed to improve code readability.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The WCH CH347 presents a USB CDC serial port on interface 4 while in
operating modes 0, 1, and 3. Mode 0 also presents a UART on interface
2 but this is ignored for compatibility with the other modes. Mode 2
uses vendor defined HID usages for communication and is not currently
supported. Like the FT232H the data format is hard coded to 8n1.
Tested using a CH347 breakout board and a Dell Latitude E6400.
Change-Id: Ibd4ad17b7369948003fff7e825b46fe852bc7eb9
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68264
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I8fedea1d566f0c35a9e028d4b2bb939592bd5f74
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There are SoCs (for instance Intel Elkhart Lake) that do use 100 MHz as
the base clock for I2C controllers. To support them properly add a
frequency setting for 100 MHz to the designware I2C controller driver.
Change-Id: I9ea11c6a41fd3758b771a416251e108cbe722769
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
SX9324 driver is updated per Linux's documentation found at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
Supporting logic for the deprecated SX932x driver is hence guarded by
DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
This patch by itself does not introduce functional changes to any board.
The legacy SX932x Linux driver never reached upstream Linux and is only
available in ChromeOS kernel fork of 4.4 and 5.4. Linux later accepted
a different implementation named SX9324 and has been available since
5.4. Ideally all variants should adopt the new driver; however, during
the transition phase, coreboot must support both drivers. It is better
to have a single firmware build that can work with both Linux kernel
drivers by specifying both sets of properties. Legacy driver support
should be deleted once all variants finish migration.
BUG=b:242662878
TEST=Dump ACPI SSDT then verify _DSD entries related to the legacy
SX932x driver are identical w/ and w/o this patch
(Tested on Craask and Nivviks)
Change-Id: I42cd6841c3a270c242ed2e739db245e858eadb3b
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69192
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
These functions are added for ramstage:
* add IPMI OEM command to get board configuration.
* add function to get blade index in the sled.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I85ec7ba68d580c13e368e7d656dba47ea043d33e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68779
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig SOC_RAS_BMS_SEL and corresponding support for
generating PCIe error SEL records and sending them to BMC.
Add PCIe error definitions.
This is needed for SMM, so build the ipmi kcs driver in SMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I1ee46c8da7dbccbe1e2cc00bfe62e5df2f072d65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68758
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No need to call a function that just instantly returns.
It greatly enhances readability to just check before calling a funtion
and it also removes an extra argument.
Change-Id: I4d57c45ede520160ef615725c023b7e92289a995
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is now unused by any platform.
Change-Id: I60afbde6ead70f0c887866fc351b4a6a15a89287
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69120
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all agesa CPUs are removed this code is unused.
Change-Id: If0c082bbdb09457e3876962fa75725add11cb67c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69118
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO. I'm making this an error because we should really clean these up.
BUG=b:210694108
TEST=Boot guybrush and see error:
> I2C: 02:5d: ERROR: Exposing GPIOs in Power Resource and _CRS
> \_SB.I2C1.H05D: Goodix Touchscreen at I2C: 02:5d
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcc42ed81fff295fb168a0b343e96b3a650b1c84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Instead of having callbacks into serial console code to set up the
coreboot table have the coreboot table code call IP specific code to get
serial information. This makes it easier to reuse the information as the
return value can be used in a different context (e.g. when filling in a
FDT).
This also removes boilerplate code to set up lb_console entries by
setting entry based on the type in struct lb_uart.
Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This reverts commit 059902882ce56502124375c9395ebe8b49640710.
A dependency of the previous patch that added the get_ewl_hob function
used by this patch was missing, so this patch needs to be temporary
reverted to revert the patch that breaks the build due to the missing
dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb2fa27e75eede1648ddbf82c8bfbeeb2e9220a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69228
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Add EWL (Enhanced Warning Log) driver which handles Intel EWL HOB
and prints EWL type 3 primarily associated with MRC training failures.
Change-Id: Ibd5b521bafd457505db4147c5d3fe41364a09045
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69145
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also sort includes.
Change-Id: I1727bf56b4090d040aab413006dec7aca0587d44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
- drop ERROR prefix since already provided by cbmem log
- make error text more clear about cause of error
BUG=none
Change-Id: I1795aee240a5383b21108c697e930a2e4972a0b4
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69062
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BMC major/minor revision may be 0. Get the value directly from
BMC without checking to accommodate such situation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I0e08c6d02de8f6efceb69b6d6cebad9d61cfd20e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68685
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Align with BMC on the SEL record format.
Change-Id: Icfcef684caa253663503eadffc819ad2ab65550f
Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68757
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: TangYiwei
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia40678019b2a54deb246dbfbf33ec37a8c3839e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Interrupt Identification Register (IIR) is a I/O read-access register.
Add definition of FIFO enabled for this register so that we can check
whether FIFO is enabled or not.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I12e8566822693004418cf83cae466dc3e2d612c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68566
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards which use an I2C TPM and do not use vboot will not have the
I2C bus initialized/ready at the start of the device init phase.
If TPM init is called before the bus, init will fail with I2C
transfer timeouts and a significantly lengthened boot time.
Resolves: https://ticket.coreboot.org/issues/429
TEST=build/boot google/reef w/o vboot, verify successful TPM init.
Change-Id: Ic47e465db1c06d8b79a1f0a06906843149b6dacd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68550
Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit 672bd9bee5c0045694ef20fe3e2f7a003bef0edd.
Reason for revert: Gmeet resolution dropped. When system starts
Gmeet video call, it uses the hardware accelerated encoder as per
the expectation. But, as soon as another system connects to the call,
the immediate fallback observed from hardware to software encoder.
Due to this, Gmeet resolution dropped from 720p to 180p.
Currently, this issue observed on AlderLake-N SoC based fanless
platforms. This issue is not seen on fan based systems.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alderlake-N systems. With this revert
Gmeet resolution drop not observed.
Change-Id: Idaeaeaed47be44166a7cba9a0a1fac50d2688e50
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
When system_uuid CBFS file is present and contains the UUID
in a string format, the driver will parse it and convert to binary
format to populate the SMBIOS type 1 UUID field.
TEST=Add UUID file and boot MSI PRO Z690-A DDR4 WIFI and check with
dmidecode if the UUID is populated correctly.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I22f22f4e8742716283d2fcaba4894c06cef3a4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64639
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On newer systems such as Alder Lake it has been noticed that Intel PTT
control area is not writable until PTT is switched to ready state. The
EDK2 CRB drivers always initialize the command/response buffer address
and size registers before invoking the TPM command. See STEP 2 in
PtpCrbTpmCommand function in
tianocore/edk2/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
Doing the same in coreboot allowed to perform PTT TPM startup
successfully and measure the components to PCRs in ramstage on an
Alder Lake S platform.
TEST=Enable measured boot and see Intel PTT is started successfully
and no errors occur during PCR extends on MSI PRO Z690-A DDR4 WIFI.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia8e473ecc1a520851d6d48ccad9da35c6f91005d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63957
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This patch adds the functionality to initialize the sc16is750
i2c to uart converter chip with a 14.7MHz input clock to support
115200 baud rate.
Change-Id: Ib31188b8c0f9b0ce9454da984e630eca9101d145
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
De-duplicate common initialization code (self-test and device
identification) and put it in a new ipmi_if.c unit, which is
supposed to work with any underlying IPMI interface.
Change-Id: Ia99da6fb63adb7bf556d3d6f7964b34831be8a2f
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
CB:67670 recently changed the format of the MRC metadata header, but
left the signature the same. That kinda defeats the purpose of having a
signature which is to make a data structure recognizable (because now
the same signature can refer to two different structures that cannot be
otherwise distinguished). While we don't know of any use case where
anything other than coreboot currently parses this data structure (other
than a ChromeOS-internal utility that's about to be removed), it's
probably better to still switch to a different signature for the new
header format just to stay on the safe side (e.g. if we ever need to
start parsing this somewhere else in the future).
CB:67670 only landed a week ago so hopefully the old signature + new
format variant hasn't had much time to escape into the wild yet.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic08b23862720db832a08dc4c6818894492f43cc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68012
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Example for Alder Lake PTT:
Handle 0x004C, DMI type 43, 31 bytes
TPM Device
Vendor ID: INTC
Specification Version: 2.0
Firmware Revision: 600.18
Description: Intel iTPM
Characteristics:
TPM Device characteristics not supported
OEM-specific Information: 0x00000000
TEST=Execute dmidecode and see the type 43 is populated with PTT
on MSI PRO Z690-A WIFI DDR4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I05289f98969bd431017aff1aa77be5806d6f1838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The current IPU ES entry value is always set to true for ADL-N and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
Alderlake-N silicon has the same CPU id for all the SKU's and
also the production binaries are backward compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:248249032
TEST=Verify the Camera functionality by enabling the IPU secure mode
on ADL-N variants with both ES/QS silicon.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I75b222e6f2b1ccdc5b6c448eb60afff3c1da3a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The current MRC cache update process is slow (28 ms on nissa), because
cbmem is not cached in romstage. Specifically, the new MRC data returned
by the FSP is stored in the FSP reserved memory in cbmem, so operations
on the new data (computing the checksum, comparing to the old data) are
slow.
Replace the data checksum in the MRC header with a hash, and compare
hashes instead of comparing the full data. This has two benefits:
1. The xxhash function is faster than computing an IP checksum (4 ms vs
14 ms on uncached data on nissa).
2. There's no need to memcmp() the full MRC data, which takes 14 ms on
nissa.
Before:
550:starting to load ChromeOS VPD 867,930 (4,664)
3:after RAM initialization 896,020 (28,090)
4:end of romstage 906,274 (10,254)
After:
550:starting to load ChromeOS VPD 864,820 (4,649)
3:after RAM initialization 869,652 (4,831)
4:end of romstage 879,909 (10,257)
BUG=b:242667207
TEST=Check that MRC caching still works as expected on nissa. Corrupt
the MRC cache and check that memory is retrained.
Change-Id: I1b7848d1d05e555b61e0f1cb605550dfe3449c6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67670
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create Kconfig options and boot state machine callback in ramstage for
an early initialization of the PTN3460 DP-to-LVDS bridge. This allows
showing the bootsplash screen on mainboards utilizing this chip during
the PCI device enumeration.
BUG=none
TEST=Select PTN3460_EARLY_INIT config switch in mainboard Kconfig and
check the log for "Attempting PTN3460 early init" message. If the
board (e.g. siemens/mc_apl7 in this case) is also configured for
showing the bootsplash logo, it should be now visible.
Change-Id: I5424d062b3fb63c78cfced3971376353be11c504
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67681
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new smbus console driver and Kconfig
options to enable the driver.
Change-Id: Ife77fb2c3e1cc77678a4972701317d50624ceb95
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67339
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using malloc would increase the heap use each time this function is
called. Instead allocate a per struct device buffer inside the
chip_info struct.
Found by coverity scan, CID 1488815.
Change-Id: Ie24870b34338624b3bf3a6f420debdd24a68ffbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64338
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add a property to control the driving of ADCOUT.
BUG=b:234789689
TEST= build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibbedd5838a795ee645a5458b960062c5530ff3b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This reverts commit 510a55d4eeaeb32047c17328ef238b55b89e7296.
Reason for revert: Observed `missing read resource` issue for
cnvi device
BUG=b:244687646
TEST=No error seen in AP log while booting Google/rex
Without this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[ERROR] GENERIC: 0.0 missing read_resources
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
With this patch:
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0
[SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e881313729f1088cffa7c161722ee79bb9acc49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67566
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This reverts commit f83b7d494e3ceb6bec11027ae5f21999ee5ad196.
It turns out we have tests which use `futility validate_rec_mrc` to
validate the MRC cache, which includes verifying the data checksum.
Revert this to allow the tests to pass while we figure out how to fix
this.
BUG=b:245277259, b:242667207
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: Id913d00584444c21cb94668bdc96f4de51af7cee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On some platforms the HFSTS4 bit 19 does not indicate active PTT.
Instead of ME HFSTS4, use TXT FTIF register to check active TPM for
the current boot. Discrete TPM shall be deactivated when PTT is
enabled so this always should return true value of PTT state.
Leave the old method for backwards compatibility if TXT FTIF would not
be applicable for older microarchitectures.
Based on DOC #560297.
TEST=Check if PTT is detected as active on MSI PRO Z690-A DDR4 WIFI
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a55c9f38f5bb94fb1186592446a28e675c1207c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Currently, the "loading FSP-S" timestamp is added in fsp_silicon_init().
However, most Intel platforms actually load FSP-S earlier than this, in
soc_fsp_load(). So the timestamp is added in the wrong place.
Add the timestamp in fsps_load() instead, after the load_done early
return so that it will only be added for the first call.
Before:
949:finished CSE firmware sync 961,833 (17,998)
17:starting LZ4 decompress (ignore for x86) 1,018,328 (56,495)
18:finished LZ4 decompress (ignore for x86) 1,018,797 (469)
30:device enumeration 1,035,096 (16,298)
971:loading FSP-S 1,048,082 (12,986)
954:calling FspSiliconInit 1,049,331 (1,249)
After:
949:finished CSE firmware sync 959,355 (16,370)
971:loading FSP-S 978,139 (18,784)
17:starting LZ4 decompress (ignore for x86) 1,015,796 (37,656)
18:finished LZ4 decompress (ignore for x86) 1,016,271 (475)
30:device enumeration 1,032,567 (16,295)
954:calling FspSiliconInit 1,046,867 (14,300)
BUG=b:239769975
TEST="loading FSP-S" is added in the right place on nivviks (see above).
Change-Id: Ib26cf96ae97766333fe75ae44381d4f7c6cc7b61
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a driver for a new RTC from Micro Crystal. Supported
features are:
* configure backup voltage switchover via devicetree
* configure backup capacitor charging mode via devicetree
* set date if a voltage drop on backup voltage was detected
to either a user definable (devicetree) or coreboot build date
Change-Id: I37176ea726e50e4e74d409488981d7618ecff8bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add multiple fan support for dptf policies
BUG=b:235254828
BRANCH=None
TEST=Built and tested on Redrix system for two fans
Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ic8e04ae043145a3633c0b8379a797724f95fd7ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This workaround was added since reading the firmware version on Ti50
versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is
using Ti50 this old anymore, so remove the workaround.
BUG=b:224650720,b:236911319
TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the
firmware version:
[INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c
Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
When MRC_SAVE_HASH_IN_TPM is selected, mrc_data_valid() uses the TPM
hash to verify the MRC cache data, not the checksum. However, we still
calculate the checksum when updating the cache. Skip this calculation
when MRC_SAVE_HASH_IN_TPM is selected to save boot time.
On nissa, this reduces boot time by ~14 ms:
Before:
3:after RAM initialization 854,298 (28,226)
After:
3:after RAM initialization 849,626 (14,463)
Note, the reason the calculation is so slow is that the new MRC data
lives in CBMEM, which is not yet marked as cacheable in romstage.
BUG=b:242667207
TEST=MRC caching still works as expected on nivviks. After clearing
the MRC cache, memory training happens on the next boot, but doesn't on
subsequent boots.
Change-Id: Ifbb75ecfa17421c0565aec1f3eb48d950244f821
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This patch implements EFI_PEI_MP_SERVICES_PPI structure definitions
with APIs that return mp_api_unsupported().
The reason behind this change is to fix an FSP issue where FSP assumes
ownership of the APs (Application Processors) upon passing a `NULL`
pointer to the CpuMpPpi FSP-S UPD.Hence, this patch implements
`MP_SERVICES_PPI_DEFAULT` config to fill EFI_PEI_MP_SERVICES_PPI with
`mp_api_unsupported` APIs.
Later this data structure can be passed to the CpuMpPpi UPD to avoid
APs from getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
TEST=Able to build and boot Google/Taeko with this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I31fcaa2aa633071b6d6bfa05dbe891ef87978d2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=none
TEST=See "[INFO ] Initialized TPM device TI50 revision 83"
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I3af5f4653b6b8ecd086f85ec573530a4e5c57211
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
earyl ---> early
Change-Id: I06412fd9487aaa1115fdbd86ff44b34db97d97d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Reading firmware_version register is supported on Ti50 version
0.22.4. Therefore correct the help text of the Kconfig option
TI50_FIRMWARE_VERSION_NOT_SUPPORTED.
Also change the message level to BIOS_WARNING.
BUG=b:234533588
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I66a0ef896c9dc4cd0f586555a55dbcd1cfd863f9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66906
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Pronin <apronin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add GPIO configuration and device tree to enable the chip.
BUG=b:240607130
BRANCH=firmware-brya-14505.B
TEST=Patch linux with NXP's pending drivers
UWB device is probed and can respond to a simple hello packet
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I83be712d243c365a5cbfe6f69a6bd85440c5bec7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add MAX98396 support.
BUG=b:232606045
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I835b51ea1fcc9363992d43a625f80cb545802fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move the `offset` parameter into pciexp_find_extended_cap(). If it's
called with `0`, we start a new search. If it's an existing offset,
we continue the search.
This makes it easier to search for multiple occurences of a capa-
bility in a single loop.
Change-Id: I80115372a82523b90460d97f0fd0fa565c3f56cb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add a new driver for NXP UWB SR1xx (e.g., SR150) device.
The driver was originally written by Tim Wawrzynczak as a WIP in
CL:3503703, and was based on drivers/spi/acpi.
BUG=b:240607130
BRANCH=firmware-brya-14505.B
TEST=On ghost (with follow-up CL), patch linux with NXP's pending
drivers
-> UWB device is probed and can respond to a simple hello
packet
Co-authored-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I5b1b0a5c1b48d0b09e7ab5f2ea6b6bc2fba2a7d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66466
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds SPDX identifiers to the remaining source files in the
drivers directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I97f96de857515214069c3b77f3c781f7f0555c6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66499
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The check was recently removed to allow callers to pass `count == 0`.
Dereferencing the `msg` array is invalid in that case, though. Linux,
where we borrowed the i2c interface from, also treats this with -EINVAL.
Change-Id: I1eec02dd3a3fcf2d477a62cc65292fca40e469d3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
clang shows the warning below:
src/drivers/elog/elog.c:171:13: error:
format string is not a string literal
(potentially insecure) [-Werror,-Wformat-security]
elog_debug(msg);
^~~
Found-by: clang (13.0.1)
Change-Id: I3f8949f9ce0c4ef4823530c61c503b0883bb5efc
Signed-off-by: Matei Dibu <matdibu@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66262
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
wifi
This reverts commit 5e6fd360de7fe92f1e8b1b3eb20241809e2a6aff.
On nereid, the SSDT entry for the PCIe wifi device is missing, causing
wake-on-WLAN not to work since the _PRW is missing.
It seems like when commit 5e6fd360de changed the SSDT generation logic
for CNVi and PCIe wifi, it broke the PCIe case. `wifi_pcie_ops` are
never assigned to any device, so
`parent && parent->ops == &wifi_pcie_ops` always returns false, and the
`wifi_cnvi_ops` are used even for PCIe devices.
Undo the changes in that CL. This allows both the CNVi and PCIe cases to
work. That CL was meant to fix an issue with the CNVi _PRW containing
garbage, but I can't reproduce this when the change is undone.
It was also meant to fix the following error on CNVi devices, but I
don't see any errors with this change:
[ERROR] NONE missing set_resources
BUB=b:233325709
TEST=On both nivviks (CNVi) and nereid (PCIe), check that the SSDT
contains the correct wifi device entries (below), including a _PRW
containing the correct GPE, and check that wake-on-WLAN works.
nivviks:
```
Scope (\_SB.PCI0.CNVW)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x6D,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
nereid:
```
Device (\_SB.PCI0.RP01.WF00)
{
Name (_UID, 0x923ACF1C) // _UID: Unique ID
Name (_DDN, "WIFI Device") // _DDN: DOS Device Name
Name (_ADR, 0x0000000000000000) // _ADR: Address
}
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
<snip>
}
}
```
Fixes: 5e6fd360de ("drivers/wifi/generic: Fix properties in generic-under-PCI device case")
Change-Id: I100c5ee3842997c50444e5ce68d583834ed3a8ad
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66063
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds support for `_PRW` in this driver.
BUG=b:237682766
TEST=Built and booted on Skyrim device, dumped SSDT
Change-Id: Ife4ba48994cbf993bc88df8354576336438e4258
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65799
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds code to allow the driver to use an ACPI device name
that is set in the device tree.
BUG=b:237682766
TEST=Boot changes on Skyrim device, dumped SSDT
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: Ie40a335e35b8ac83658e67d7cfba0750dd4784ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65798
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes unneeded and unused functionality in the driver as part of
an effort to make the driver more generic and useful. The things that
have been removed are: `DmaProperty` and its associated `is_untrusted`
config, `_DSD` generation, and the companion device functionality. This
driver isn't currently used anywhere so there won't be any issues from
removing the above functionality.
BUG=b:237682766
TEST=Built and booted coreboot on Skyrim device
Change-Id: I0abd9148ab66ea9426069102ecc8c2fa77fea98e
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65797
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I0a11d303d2e2c83cb72773656f5caedec666dc66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id33ef66e7388df2173ee8888265ed4379f05a93e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ic1b38e93d919c1286a8d130700a4a2bfd6b55258
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
As per Intel Dynamic Tuning Spec revision 1.3.13, section 14.1.2 TBAT
_UID should match the _UID implemented for battery device ACPI object
for OS
_UID for TBAT is currently set to "TBAT" but should be 1.
Battery device is define at src/ec/google/chromeec/acpi/battery.asl
Setting _UID to 1 because right now ChromeOS is the only user
of DPTF driver
TEST: Build and boot brya0
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I1e4474e59cf01f937fbd51e5b674a609f0c47625
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As part of this CL https://review.coreboot.org/c/coreboot/+/61020
this function was decoupled and support for new DSM was added.
This function is no longer used so remove it.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Iad9dca8e50bad87178dfcc1951276703721d5f60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65850
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This moves the die() statement to a common place.
Change-Id: I24c9f00bfee169b4ca57b469c089188ec62ddada
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Since there are many identifiers whose name contain "__unused" in
headers of musl libc, introducing a macro which expands "__unused" to
the source of a util may have disastrous effect during its compiling
under a musl-based platform.
However, it is hard to detect musl at build time as musl is notorious
for having explicitly been refusing to add a macro like "__MUSL__" to
announce its own presence.
Using __always_unused and __maybe_unused for everything may be a good
idea. This is how it works in the Linux kernel, so that would at least
make us match some other standard rather than doing our own thing
(especially since the other compiler.h shorthand macros are also
inspired by Linux).
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I547ae3371d7568f5aed732ceefe0130a339716a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution")
Resolves:
https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/
5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing
the value at '_estack' into %esp rather than the address '_estack'.
Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
CPUID_RAPTORLAKE_P_Q0 is ES. Add it to generate is_es = 1 in ACPI
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: zhixingma <zhixing.ma@intel.com>
Change-Id: I67d70dc7e916a4818869aef86e7e642b66ea5dae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Having PTT means mocking secdata, so saving/reading the hash always
succeeds, but there is no data stored/read from/to TPM. The code
comparing MRC hashes did not care if secdata mocking was enabled
and failed during hash comparison with invalid data. This broke the
fastboot even if the MRC cache data was filled and correctly
checksummed. If mocking is enabled simply fallback to checksum
computing to proceed with fastboot.
TEST=Boot MSI PRO Z690-A WIFI DDR4 in fastboot mode with PTT and vboot
enabled.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic0cf04b129fe1c5e94cd8a803bb21aa350c3f8da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The TPM PPI code was only generated for memory mapped non-CRB TPMs.
There is no reason why CRB TPM should not have the PPI, e.g. PTT.
Call the relevant method to add the PPI to SSDT.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3d3f08ea686c95ef75ae8fe7a5dcf16f7492ce68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
dprintk(BIOS_,...) was probably useed for debug print, so use
printk(BIOS_, ...) instead.
Change-Id: Ia4171c8b4b42f6b0c1c9c0438bab2eef73f8c416
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: Ib1b3f85f95511e903948b385e86e5102d5b43add
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: I56479726f91f33e1d3062a31f1efb82c0814316c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: I043ffad90737f4217d01c49e03af81549a0ffb1b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I965a0718f6bca1dc27b928bdd9374857f5ea3215
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
