summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2021-02-01drivers/intel/fsp2_0: Use CBFS_MCACHE when coreboot tears down CARArthur Heymans
TESTED on ocp/tiogapass. Change-Id: I30560149eeaec62af4c8a982815618be5546531c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01drivers/intel/fsp2_0: Use coreboot postcar with FSP-TArthur Heymans
Allow platforms to use the coreboot postcar code instead of calling into FSP-M TempRamExit API. There are several reasons to do this: - Tearing down CAR is easy. - Allows having control over MTRR's and caching in general. - The MTRR's set up in postcar be it by coreboot or FSP-M are overwritten later on during CPU init so it does not matter. - Avoids having to find a CBFS file before cbmem is up (this causes problems with cbfs_mcache) Change-Id: I6cf10c7580f3183bfee1cd3c827901cbcf695db7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48466 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-30drivers/intel/fsp2_0: factor out and improve UPD signature checkFelix Held
In case of a mismatch print both the UPD signature in the FSP and the expected signature and then calls die(), since it shouldn't try calling into the wrong FSP binary for the platform. Signed-off-by: Justin Frodsham <justin.frodsham@protonmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I469836e09db6024ecb448a5261439c66d8e65daf Reviewed-on: https://review.coreboot.org/c/coreboot/+/50090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-29stage_cache: Add resume_from_stage_cache()Kyösti Mälkki
Factor out the condition when an attempt to load stage from cache can be tried. Change-Id: I936f07bed6fc82f46118d217f1fd233e2e041405 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-29drivers/intel/fsp1_1: Drop s3_resume parameter to load_vbt()Kyösti Mälkki
Change-Id: Iaba88026906132b96fe3db3f05950df0e7eef896 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-29intel/fsp1_1: Declare fsp_load() as staticKyösti Mälkki
The function has only one local call-site. Change-Id: I623953796e6cd3a8e5b4f72293d953b61f14a5a1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49999 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-28bayhub bh720: Factor out common HS200 init codeAngel Pons
Except for one debug print in sarien, both functions are identical. Move them to driver code to avoid unnecessary redundancy. Change-Id: I82635a289e3c05119eab4ee1f7a6bf3a8a1725c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-28drivers/elog: Correct code styleFrans Hendriks
lint report errors Solve the POINTER_LOCATION errors BUG = N/A TEST = N/A Change-Id: I65926abd6bbaff1efce39efad9ec92c4f364b533 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49971 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-28cpu/x86: Rename __protected_start symbolKyösti Mälkki
It was confusing to have this defined while there was another symbol bootblock_protected_mode_entry that was not really used as an entry point. Change-Id: I3da07ba9c0a9fc15b1515452adfb27f963659951 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48404 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25drivers/intel/fsp2_0/header_display.c: Correct component_attribute checkBenjamin Doron
According to FSP_INFO_HEADER structure in FSP EAS v2.0-v2.2, BIT1 indicates an "official" build. Change-Id: I94df6050a1ad756bbeff60cda0ebac76ae5f8249 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25bayhub bh720: Configure VIH tuning via devicetreeAngel Pons
There's no need to repeat the same code on every board. Change-Id: I2e19decfe8609fa644e609673a56ee5109bafefa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49831 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24drivers/intel/gma/opregion.c: Use __func__Elyes HAOUAS
Change-Id: Ia45825ade0c9d24d5b87882e21bfc6df82a693e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24drivers/elog/elog.c: Use __func__Elyes HAOUAS
Change-Id: I024a0c2d7c53634c58d5d80522933ecad554d7c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24arch/x86/car.ld: Account for FSP-T reserved areaArthur Heymans
Tested - on ocp/deltalake: boots (with FSP-T). - qemu/i440fx: BUILD_TIMELESS=1 results in the same binary. Change-Id: I7e364ab039b65766eb95538db6b3507bbfbfb487 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23drivers/intel/fsp2_0: Add meaningful ERROR messageSubrata Banik
Add the "ERROR:" tag so that it ease debug effect. TEST=Test tools like "suspend_stress_test" (specific to Chrome OS) can identify the obvious coreboot ERROR prior running S3 resume test. Change-Id: I64717ce0412d43697f42ea2122b932037d28dd48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49798 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22drivers/intel/usb4: Enable retimer FW upgrade mux interactionBrandon Breitenstein
In order to update the BB retimers for usb4/tbt they need to be turned on and into TBT mode. Expand the current DSM to allow for the use of an EC RAM byte RFWU to get the current state of each port and whether or not it has a retimer. It also allows Kernel to issue state transitions for the retimer to be put into TBT mode for firmware update. BUG=b:162528867 TEST=Along with work in progress kernel and EC patches, the Retimer firmware update is verified under device attached and no device attached scenarios. Change-Id: I768cfb56790049c231173b0ea0f8e08fe6b64b93 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21src/drivers/smmstore: Fix SMMSTOREv1 clear commandTim Crawford
The `clear` command for SMMSTORE version 1 does not require a parameter. Change-Id: I992b7ce5962bf7ee62b7e1970ae7aa1b975ef42e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49724 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21drivers/intel/fsp1_1/temp_ram_exit.c: Initialize CBMEMFrans Hendriks
prog_locate() will load FSP, before CBMEM is initialized. The vboot workbuffer is used for loading, but CBMEM_ID_VBOOT_WORKBUF is not available. A NULL pointer is returned as workbuffer resulting in error 'Ramstage was not loaded!' at second boot. Initialize CBMEM before calling prog_locate(). BUG = N/A TEST = Build and boot on Facebook FBG1701 Change-Id: I2f04a326a95840937b71f6ad65a7c011268ec6d6 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-19drivers/spi/tpm/tpm.c: Use __func__Elyes HAOUAS
Change-Id: I8a8b0575689d7b63fd37edc457abc42710a13e97 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-01-19drivers/spi/tpm/tis.c: Use __func__Elyes HAOUAS
Change-Id: I2941d4480a7c88b6c020a9da584135a0030fccfe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-01-19drivers/i2c/tpm/cr50.c: Use __func__Elyes HAOUAS
Change-Id: If2751f3672072b7fa421ae33dc6e1490fdf35247 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-01-19drivers/i2c/tpm/tpm.c: Use __func__Elyes HAOUAS
Change-Id: I28f976118a380ef05a98257e9d57aadc26b69cb5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-01-19drivers/i2c/tpm/tis.c: Use __func__Elyes HAOUAS
Change-Id: I598d27995fad7582ff41f4e7deaeb2e75e8ebde9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-01-18drivers/ocp/dmi/Kconfig: Set FRU_DEVICE_ID depend on OCP_DMIElyes HAOUAS
This will remove "CONFIG_FRU_DEVICE_ID=0" from ".config" when unused. Change-Id: Ic50de165c1f3de3886d3cd1ae66853c9fad35ed2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-01-18drivers/ti/sn65dsi86bridge: Add parentheses to MacrosElyes HAOUAS
Change-Id: I2f3a9885171995633d0bfb22b7ff8ef8a68683b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-01-18drivers/maxim/max77686/max77686.h: Remove repeated wordElyes HAOUAS
Change-Id: Iac77f401d80027231f8b6a3449cb57abf3d337ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2021-01-18drivers/intel/gma/intel_bios.h: Remove repeated wordElyes HAOUAS
Change-Id: I5866a5e3240e49119e29f728202b33dd82ceaf77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2021-01-18drivers/i2c/sx9324: Add IrqCfg1 registerStanley Wu
Add IrqCfg1 register for proximity IRQ function and polarity setting. BUG=b:175932166 BRANCH=dedede TEST=Build passed. Change-Id: I3cee84a5658fecf55d2d8b8621879588ffe0158d Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49220 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18ACPI: Select ACPI_SOC_NVS only where suitableKyösti Mälkki
Having some symmetry with <soc/nvs.h> now allows to reduce the amount of gluelogic to determine the size and cbmc field of struct global_nvs. Since GNVS creation is now controlled by ACPI_SOC_NVS, drivers/amd/agesa/nvs.c becomes obsolete and soc/amd/cezanne cannot have this selected until <soc/nvs.h> exists. Change-Id: Ia9ec853ff7f5e7908f7e8fc179ac27d0da08e19d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-01-12drivers/genesyslogic/gl9763e: Add HS400ES compatibility settingsBen Chuang
By default, the HS400 mode of GL9763E is slow mode (150MHz). Therefore, the slow mode is disabled for HS400 running at 200MHz. For eMMCs such as Hynix (H26M74002HMR) on HS400, adjust the internal Rx latch dealy of HS400 to have better compatibility. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I84844c2432d4223d9929182c5c430915e52875b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11drivers/genesyslogic/gl9763e: Fix boot on eMMC failed issue on VolteerRenius Chen
Booting on Kingston (EMMC64G-TA29/TX29-HP) and Hynix (H26M74002HMR) eMMC currently fails due to R/W error. This is a workaround to finetune the data latch timing by verdor-specific setting of GL9763E. For improving the compatibility of GL9763E with these two eMMC. Signed-off-by: Renius Chen <reniuschengl@gmail.com> Change-Id: Iddb145ed6a9edb2d7a50248e64659cda78b88ae6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-10ACPI: Drop redundant CBMEM_ID_ACPI_GNVS allocationsKyösti Mälkki
Allocation now happens prior to device enumeration. The step cbmem_add() is a no-op here, if reached for some boards. The memset() here is also redundant and becomes harmful with followup works, as it would wipe out the CBMEM console and ChromeOS related fields without them being set again. Change-Id: I9b2625af15cae90b9c1eb601e606d0430336609f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48701 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07arch/x86: Move prologue to .init sectionKyösti Mälkki
For arch/x86 the realmode part has to be located within the same 64 KiB as the reset vector. Some older intel platforms also require 4 KiB alignment for _start16bit. To enforce the above, and to separate required parts of .text without matching *(.text.*) rules in linker scripts, tag the pre-C environment assembly code with section .init directive. Description of .init section for ELF: This section holds executable instructions that contribute to the process initialization code. When a program starts to run, the system arranges to execute the code in this section before calling the main program entry point (called main for C programs). Change-Id: If32518b1c19d08935727330314904b52a246af3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47599 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04drivers/vpd: Add support to read device serial from VPDMatt DeVillier
Add functions to read the system and mainboard serial numbers from VPD tables stored in flash. Remove board-specific implementations for google/drallion and google/sarien and select the new Kconfig instead. Test: build/boot google/akemi with RO_VPD region persisted from stock Google firmware, verify system/mainboard serial numbers present via dmidecode. Change-Id: I14ae07cd8b764e1e22d58577c7cc697ca1496bd5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49050 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04drivers/vpd: Add VPD region to default FMAP when selectedMatt DeVillier
Currently, use of the VPD driver to read VPD tables from flash requires the use of a custom FMAP with one or more VPD regions. Extend this funtionality to boards using the default FMAP by creating a dedicated VPD region when the driver is selected. Test: build qemu target with CONFIG_VPD selected, verify entry added to build/fmap.fmd. Change-Id: Ie9e3c7cf11a6337a43223a6037632a4d9c84d988 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-03drivers/intel/gma: add macro for one internal panel in gfx structMichael Niewöhner
Add a new macro `GMA_DEFAULT_PANEL(ssc)` as shortcut for specifying one internal panel at port A (0) in the devicetree. Change-Id: I5308b53667657d0b255ae5bc543f1a00431f5818 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-30drivers/intel/gma: Include gfx.asl by default for all platforms...Matt DeVillier
which select INTEL_GMA_ACPI. Rework brightness level includes and platform-level asl files to avoid duplicate device definition for GFX0. Include gfx.asl for Skylake/Kabylake, since all other soc/intel/common platforms already do. Adjust mb/51nb/x210 to prevent device redefinition. Some OSes (e.g. Windows, MacOS) require/prefer the ACPI device for the IGD to exist, even if ACPI brightness controls are not utilized. This change adds a GFX0 ACPI device for all boards whose platforms select INTEL_GMA_ACPI without requiring non-functional brightness controls to be added at the board level. Change-Id: Ie71bd5fc7acd926b7ce7da17fbc108670fd453e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/intel/common: Move gfx.asl to drivers/intel/gmaMatt DeVillier
Adjust platform-level includes as needed. Change-Id: I376349ccddb95c166f0836ec1273bb8252c7c155 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/intel/cnl: add Kconfig values for GMA backlight registersMichael Niewöhner
Add the right register values for backlight control to CNL's Kconfig. To make iasl happy about the reversed register order, split the field. Change-Id: I05a06cc42397c202df9c9a1ebc72fb10da3b10ec Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-30drivers/ipmi: implement "POST complete" notification functionalityMichael Niewöhner
Some server boards like OCP Tiogapass and X11-LGA1151 boards use a gpio for signalling "POST complete" to BMC/IPMI. Add a new driver devicetree option to set the gpio and configure a callback that pulls the gpio low right before jumping to the payload. Test: Check that sensor readings appear in BMC web interface when the payload gets executed. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: I34764858be9c7f7f1110ce885fa056591164f148 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30drivers/ipmi: add code to set BMC/IPMI enablement from jumperMichael Niewöhner
Some boards, like the Supermicro X11SSM-F, have a jumper for enabling or disabling the BMC and IPMI. Add a new devicetree driver option to set the GPIO used for the jumper and enable or disable IPMI according to its value. This gets used in a follow-up change by Supermicro X11SSM-F. Test: Boot with jumper set to each enabled and disabled and check debug log if IPMI gets enabled/disabled accordingly. Successfully tested on Supermicro X11SSM-F with CB:48095. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icde3232843a7138797a4b106560f170972edeb9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-28drivers/intel/gma: drop unused register to resolve name conflictMichael Niewöhner
The register `ESR` conflicts with the `Exception syndrome register` in UDK2017. To resolve the conflict, drop the unused `ESR` register from gma registers. It can be readded and prefixed or renamed if it's required at a later point. Change-Id: Icfdd834aea59ae69639a180221f5e97170fbac15 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-28drivers/libgfxinit: Add Comet Lake to supported platformsFelix Singer
Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I002ade555c0544e4ef738c1ad45ee3d8aa38e03e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-283rdparty/libgfxinit: Update for Cannon Point supportNico Huber
We missed that Cannon Point, the PCH usually paired with Coffee, Whiskey and Comet Lake, differs a bit from its predecessors. Hence, libgfxinit now has a new Kconfig setting for the PCH. Change-Id: I1c02c0d9abb7340aabe94185ee5e17ef4c2b0d36 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-27vpd: Add vpd_get_int() functionNico Huber
Change-Id: I1c1b5710a5236fe4a3bdda1fc978393e636e9817 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45773 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-25drivers/ipmi: Add Supermicro OEM commandsPatrick Rudolph
Add a new driver for OEM commands and select it from x11-lga1151-series. The driver communicates the BIOS version and date to the BMC using OEM commands. The command should be supported on all X11 series mainboards, but might work with older BMC, too. Tested on X11SSH-TF: The BIOS version strings are updated on boot and are visible in the BMC web UI. Change-Id: I51c22f83383affb70abb0efbcdc33ea925b5ff9f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-21drivers/tpm/ppi_stub: Fix interface versionPatrick Rudolph
The latest version defined by TCG is 1.3. Change-Id: Idb12e2212d6d38c720c8fe989678724c871af6ef Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45569 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21drivers/tpm: Implement full PPIPatrick Rudolph
Implement the ACPI PPI interface as described in "TCG PC Client Physical Presence Interface Specification" Version 1.3. Add a new Kconfig that allows to use the full PPI instead of the stub version compiled in. This doesn't add code to execute the PPI request, as that's up to the payload with graphical UI support. Tested on GNU/Linux 5.6 using the sysfs interface at: /sys/class/tpm/tpm0/ppi/ Change-Id: Ifffe1d9b715e2c37568e1b009e86c298025c89ac Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45568 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21drivers/intel/fsp2_0: recreate FSP targets on config changeMichael Niewöhner
When a different FSP binary was chosen in menuconfig, the split fd files do not get updated. Thus, make them depend on `.config` to trigger a rebuild when the config changes. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I54739eae50fa1a47bf8f3fe2e79334bc7f7ac3d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-17drivers: Replace set_vbe_mode_info_validPatrick Rudolph
Currently it's not possible to add multiple graphics driver into one coreboot image. This patch series will fix this issue by providing a single API that multiple graphics driver can use. This is required for platforms that have two graphic cards, but different graphic drivers, like Intel+Aspeed on server platforms or Intel+Nvidia on consumer notebooks. The goal is to remove duplicated fill_fb_framebuffer(), the advertisment of multiple indepent framebuffers in coreboot tables, and better runtime/build time graphic configuration options. Replace set_vbe_mode_info_valid with fb_add_framebuffer_info or fb_new_framebuffer_info_from_edid. Change-Id: I95d1d62385a201c68c6c2527c023ad2292a235c5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-14drivers: Replace multiple fill_lb_framebuffer with single instancePatrick Rudolph
Currently it's not possible to add multiple graphics drivers into one coreboot image. This patch series will fix this issue by providing a single API that multiple graphics drivers can use. This is required for platforms that have two graphic cards, but different graphic drivers, like Intel+Aspeed on server platforms or Intel+Nvidia on consumer notebooks. The goal is to remove duplicated fill_fb_framebuffer(), the advertisment of multiple independent framebuffers in coreboot tables, and better runtime/build time graphic configuration options. Replace all duplications of fill_fb_framebuffer and provide a single one in edid_fill_fb.c. Should not change the current behaviour as still only one graphic driver can be active at time. Change-Id: Ife507f7e7beaf59854e533551b4b87ea6980c1f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-12drivers/ipmi: Handle the condition when (dev->chip_info == NULL)Bill XIE
Some former commits (e.g. Ieb41771c75aae902191bba5d220796e6c343f8e0) blindly assume that dev->chip_info is capable to be dereferenced, making at least compilers complain about potential null pointer dereference. They might cause crash if truly (dev->chip_info == NULL). Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I1d694b12f6c42961c104fe839d4ee46c0f111197 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-10drivers/genesyslogic/gl9755: Adjust L1 exit latency to enable ASPMDuncan Laurie
Configure the CFG2 register to set the latency to <64us in order to ensure the L1 exit latency is consistent across devices and that L1 ASPM is always enabled. This moves the setup code from device init to device enable so it executes before coreboot does ASPM configuration, and removes the call to pci_dev_init() as that is just for VGA Option ROMs. BUG=b:173207454 TEST=Verify the device and link capability and control for L1: DevCap: Latency L1 <64us LnkCap: Latency L1 <64us LnkCtl: ASPM L1 Enabled Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ie2b85a6697f164fbe4f84d8cd5acb2b5911ca7a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-10drivers/intel/fsp1_1/cache_as_ram.S: Correct commentFrans Hendriks
Stack is set up for bootblock. Tested on Facebook FBG1701. Change-Id: I0dd3fc91c90bf76e0d93925da35dc197d68d3e88 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47802 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10drivers/crb/tpm: Fix compilation on x86_64Patrick Rudolph
Change-Id: I19cce90f44b54e4eb6dd8517793ae887f0bd1e22 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-08coreboot tables: Add SPI flash memory map windows to coreboot tablesFurquan Shaikh
This change adds details about the memory map windows to translate addresses between SPI flash space and host address space to coreboot tables. This is useful for payloads to setup the translation using the decode windows already known to coreboot. Until now, there was a single decode window at the top of 4G used by all x86 platforms. However, going forward, platforms might support more decode windows and hence in order to avoid duplication in payloads this information is filled in coreboot tables. `lb_spi_flash()` is updated to fill in the details about these windows by making a call to `spi_flash_get_mmap_windows()` which is implemented by the driver providing the boot media mapping device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I00ae33d9b53fecd0a8eadd22531fdff8bde9ee94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48185 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08drivers/i2c/tpm: Unconditionally allow I2C TPM ACPI nodeJes Klinke
DRIVER_I2C_TPM_ACPI is used to enable the "driver" needed for coreboot to present a TPM node in the devicetree. It would usually only do so, if coreboot itself is communicating with the TPM via I2C (I2C_TPM). However, technically, there is no dependency. In order to not show the ACPI option in menuconfig if the board is not using I2C, a dependency was declared in Kconfig. However, the same can be achieved without making it an error to manually declare DRIVER_I2C_TPM_ACPI without I2C_TPM. For Volteer, we have just such a need, since it has two "sub-variants" sharing the same overridetree.cb, one having SPI TPM and another having I2C TPM. The former will have a disabled ACPI node representing the I2C TPM, while its Kconfig is such that coreboot itself does not have I2C TPM support. In order to export even a disabled ACPI node representing the I2C connected TPM, coreboot needs DRIVER_I2C_TPM_ACPI. Hence, that will have to be enabled in a case where coreboot does not have I2C_TPM (for one of the two sub-variants, namely volteer2). BUG=b:173461736 TEST=Tested as part of next CL in chain Change-Id: I9717f6b68afd90fbc294fbbd2a5b8d0c6ee9ae55 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48222 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05drivers/intel/fsp2_0/memory_init: Wrap calls into FSPPatrick Rudolph
Use a wrapper code that does nothing on x86_32, but drops to protected mode to call into FSP when running on x86_64. Tested on Intel Skylake when running in long mode. Successfully run the FSP-M which is compiled for x86_32 and then continued booting in long mode. Change-Id: I9fb37019fb0d04f74d00733ce2e365f484d97d66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48202 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05drivers/i2c/sx9324: Add more registers and reorderEric Lai
Export all registers that driver is looking for. And put in alphabetic order. The missing registers for kernel v5.4 sx93xx are: reg_irq_msk reg_irq_cfg0 reg_irq_cfg2 reg_afe_ph0/1/2/3 BUG=b:172397658 BRANCH=zork TEST=Build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic9d7a959b1769b6846bba302e3aeab9a3a1cedac Reviewed-on: https://review.coreboot.org/c/coreboot/+/47866 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04drivers/intel/fsp2_0: FSP-T requires NO_CBFS_MCACHEArthur Heymans
When FSP-T is used, the first thing done in postcar is to call FSP-M to tear down CAR. This is done before cbmem is initialized, which means CBFS_MCACHE is not accessible, which results in FSP-M not being found, failing the boot. TESTED: ocp/deltalake boots again. Change-Id: Icb41b802c636d42b0ebeb3e3850551813accda91 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48282 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03spi/flashconsole: Fix internal buffer overflowNico Huber
Once the console's FMAP region is full, we stop clearing the line buffer and `line_offset` is not reset anymore. Hence, sanity check `line_offset` everytime before writing to the buffer. The issue resulted in boot hangs and potentially a brick if the log was very verbose. Change-Id: I36e9037d7baf8c1ed8b2d0c120bfffa58c089c95 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48074 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02lib/trace: Remove TRACE supportKyösti Mälkki
Looks like the option is generally not compatible with garbage collections. Nothing gets inlined, for example is_smp_boot() no longer evaluates to constant false and thus the symbols from secondary.S would need to be present for the build to pass even if we set SMP=n. Also the addresses of relocatable ramstage are currently not normalised on the logs, so util/genprof would be unable dress those. Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02drivers/i2c/nct7802y: Move the sensor initialization procedureMaxim Polyakov
The current location for the sensor initialization procedure was chosen by mistake. Move this into a separate function in nct7802y.c . Change-Id: I093ae75db5f0051bff65375b0720c86642b9148a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01drivers/aspeed/common/ast: Fix compilation under x86_64Patrick Rudolph
Change-Id: I5fb6594ff83904df02083bcbea14b2d0b89cd9dd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01drivers/intel/fsp2_0/notify: Fix compilation under x86_64Patrick Rudolph
Change-Id: Id63b9b372bf23e80e25b7dbef09d1b8bfa9be069 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-30drivers/intel/fsp2_0: Remove console in weak functionArthur Heymans
This pollutes the log on all platforms not implementing an override. Change-Id: I0d8371447ee7820cd8e86e9d3d5e70fcf4f91e34 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48128 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30drivers/intel/i210: Request Bus Master in .final opsAngel Pons
Commit bd31642ad8 (intel/i210: Set bus master bit in command register) is only necessary because a buggy OS expects Bus Master to be set, not because the hardware requires Bus Master during initialization. It is thus safe to defer the Bus Master request into the .final callback. Change-Id: Iecfa6366eb4b1438fd12cd9ebb1a77ada97fa2f6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47401 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot
2020-11-30drivers/intel/i210: Define MAC_ADDR_LENAngel Pons
Define and use the MAC_ADDR_LEN macro in place of the `6` magic value. Change-Id: Icfa2ad9bca6668bea3d84b10f613d01e437ac6a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47404 Tested-by: siemens-bot Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-11-26drivers/intel/fsp2_0: move the FSP FD PATH option down in menuconfigMichael Niewöhner
Move the FSP FD PATH option down, so it gets shown in place of the split FD files, when the users chooses to use a full FD binary. Change-Id: Ie03a418fab30a908d020abf94becbaedf54fbb99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-26drivers/intel/fsp2_0: introduce possibility of using a full FD binaryMichael Niewöhner
Currently, setting a custom FSP binary is only possible by using split FSP-T/M/S FD files. This change introduces the possibility to pass a combined FD file (the "standard" FSP format). This is done by adding a new boolean Kconfig FSP_FULL_FD, specifying that the FSP is a single FD file instead of split FSP-T/M/S FD files, and making FSP_FD_PATH user-visible when the option is chosen. In this case, the other options for split files get hidden. When the user chooses to use a full FD file instead of the split ones, the FD file gets split during build, just like it is done when selecting the Github FSP repo (FSP_USE_REPO). Test: Supermicro X11SSM-F builds and boots fine with custom FSP FD set. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I1cb98c1ff319823a2a8a95444c9b4f3d96162a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22drivers/tpm: Move PPI stubPatrick Rudolph
As preparation to a full PPI implementation move the acpi code out of the pc80/tpm/tis driver into the generic tpm driver folder. This doesn't change any functionality. Change-Id: I7818d0344d4a08926195bd4804565502717c48fa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22drivers/i2c/hid: Use ACPI device name if provided by configMatt DeVillier
Follow model of drivers/i2c/generic and use user-supplied device name if specified in the chip config. Change-Id: Ia783bac2797e239989c03a3421b9293a055db3d0 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47782 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22drivers/i2c/generic: Only write DDN field if description not emptyMatt DeVillier
DDN field isn't required, no point in writing an empty string to it. Change-Id: Ifea6e48c324598f114178e86a79f519ee35f5258 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47781 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22drivers/i2c: Add a driver for Semtech SX9324Eric Lai
This adds a new driver for the SX9324 proximity detector device. Follow SX9324 datasheet Rev3. BUG=b:172397658 BRANCH=zork TEST=Test sx9324 is working as expected. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifd582482728a2f535ed85f6696b2f5a4529ba421 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47640 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22drivers/intel/fsp1_1: Add function to report FSP-T outputFrans Hendriks
This allows to compare the FSP-T output in %ecx and %edx to coreboot's CAR symbols. Tested on Facebook FBG1701 Change-Id: Ice748e542180f6e1dc1505e7f37b6b6c68772bda Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22src/drivers/intel/fsp1_1/cache_as_ram.S: Clear _bss area onlyFrans Hendriks
Whole car region is cleared, while only small part needs to be done. Clear .bss area only Tested on Facebook FBG1701 Change-Id: I021c2f7d3531c553015fde98d155915f897b434d Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-20intel/fsp2_0: Add soc_validate_fsp_version for FSP version checkJohnny Lin
Only need to check this once so check it at romstage where the console is usually ready. Also define union fsp_revision to avoid code duplication. Change-Id: I628014e05bd567462f50af2633fbf48f3dc412bc Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-11-20drivers/intel/fsp1_1/cache_as_ram.S: Use _car_stack area for stackFrans Hendriks
Top of Temp RAM is used as bootloader stack, which is the _car_region_end area. This area is not equal to CAR stack area as defined in car.ld file. Use _ecar_stack (end of CAR stack) as starting stack location. Tested VBOOT, Vendorboot security and no security on Facebook FBG1701. Change-Id: I16b077f60560de334361b1f0d3758ab1a5cbe895 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47737 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20vc/google/chromeos/sar: Make "SAR not found" log a debug messageMaulik V Vaghela
coreboot might not store wifi SAR values in VPD and may store it in CBFS. Logging the message with 'error' severity may interfere with automated test tool. Lowering severity to BIOS_DEBUG avoids this issue. BUG=b:171931401 BRANCH=None TEST=Severity of message is reduced and we don't see it as an error Change-Id: I5c122a57cfe92b27e0291933618ca13d8e1889ba Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-19src/drivers/i2c/rx6110sa: Omit _HID temporarilyWerner Zeh
The current HID "RX6110SA" does not comply with the ACPI spec in terms of the naming convention where the first three caracters should be a vendor ID and the last 4 characters should be a device ID. For now there is a vendor ID for Epson (SEC) but there is none for this particular RTC. In order to avoid the reporting of a non ACPI-compliant HID it will be dropped completely for now. Once Epson has assigned a valid HID for this RTC, this valid HID will be used here instead. Change-Id: Ib77ffad084c25f60f79ec7d503f14731b1ebe9e2 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47706 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-16src/drivers/intel: Correct Kconfig option in MakefileMartin Roth
This Kconfig option was just added incorrectly, so would never add the verstage.c file. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4c39dca9d429ed786ea42c0d421d6ee815e8c419 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-16drivers/i2c/tpm: Remove ifdef of non-existant Kconfig optionMartin Roth
The CONFIG_TPM_I2C_BURST_LIMITATION was never added, so this has never been turned on. The Kconfig linter generates three warnings about this block: Warning: Unknown config option CONFIG_TPM_I2C_BURST_LIMITATION Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I53fa8f5b4eac6a1e7efec23f70395058bad26299 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47367 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16src: Update some incorrect config options in commentsMartin Roth
This is a trivial patch to fix some comments that were generating notes in the kconfig lint test. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I26a95f17e82910f50c62215be5c29780fe98e29a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47366 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16drivers/i2c/dw: Check for TX_ABORT in transferKangheui Won
When the host sends data in i2c bus, device might not send ACK. It means that data is not processed on the device side, but for now we don't check for that condition thus wait for the response which will not come. Designware i2c detect such situation and set TX_ABORT bit. Checking for the bit will enable other layers to immediately retry rather than wait-timeout-retry cycle. BUG=b:168838505 BRANCH=zork TEST=test on zork devices, now we see "Tx abort detected" instead of I2C timeout for tpm initializtion. Change-Id: Ib0163fbce55ccc99f677dbb096f67a58d2ef2bda Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12drivers/i2c/rx6110sa: Delete unused definesWerner Zeh
The defines for RX6110SA_SLAVE_ADR and RX6110SA_I2C_CONTROLLER are not used anymore and can be deleted. Change-Id: I3cddf7a9e2f757a22c729ae0f0ff767d55909b9c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-11-12drivers/i2c/rx6110sa: Add basic ACPI supportWerner Zeh
This patch adds basic ACPI support for the RTC so that the OS is able to use this RTC via the ACPI interface. If the Linux kernel is able to find the RTC in ACPI scope, you should see the following lines in dmesg, where [n] is an enumerated number: rx6110 i2c-RX6110SA:00: rtc core: registered RX6110SA:00 as rtc[n] rtc rtc[n]: Update timer was detected Change-Id: I9b319e3088e6511592075b055f8fa3e2aedaa209 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-11-10drivers/wifi: Check device is of type PCI before checking vendor IDFurquan Shaikh
CB:46865 ("mb, soc/intel: Reorganize CNVi device entries in devicetree") reorganized the devicetree entries to make the representation of CNVi device consistent with other internal PCI devices. Since a dummy generic device is added for the CNVi device, `emit_sar_acpi_structures()` needs to first check if the device is PCI before checking the vendor ID. This ensures that SAR table generation is skipped only for PCIe devices with non-Intel vendor IDs and not for the dummy generic device. BUG=b:165105210 Change-Id: I3c8d18538b94ed1072cfcc108552f3a1ac320395 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2020-11-09drivers/usb/acpi: Add support for privacy_gpioRicardo Ribalda
Some devices, such as cameras, can implement a physical switch to disable the input on demand. Think of it like the typical privacy sticker on the notebooks, but more elegant. In order to notify the system about the status this feature, a GPIO is typically used. The map between a GPIO and the feature is done via ACPI, the same way as the reset_gpio works. This patch implements an extra field for the described privacy gpio. This gpio does not require any extra handling from the power management. BUG=b:169840271 Change-Id: Idcc65c9a13eca6f076ac3c68aaa1bed3c481df3d Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09driver/usb/acpi: Add power resources for devices on USB portsKarthikeyan Ramasubramanian
Allow a USB device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: * Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. * Reset delay - Delay after reset GPIO is asserted (default 0). * Reset off delay - Delay after reset GPIO is de-asserted (default 0). * Enable GPIO - Optional, GPIO to enable device. * Enable delay - Delay after enable GPIO is asserted (default 0). * Enable off delay - Delay after enable GPIO is de-asserted (default 0). BUG=b:163100335 TEST=Ensure that the Power Resource ACPI object is added under the concerned USB device. Change-Id: Icc1aebfb9e3e646a7f608f0cd391079fd30dd1c0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46713 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09drivers/intel/gma: Add Kconfig option for vbt data sizeSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib. This change adds Kconfig option to choose vbt data size based on platform. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia294fc94ce759666fb664dfdb910ecd403e6a2e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47151 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09acpi: Call acpi_fill_ssdt() only for enabled devicesKarthikeyan Ramasubramanian
Individual drivers check whether the concerned device is enabled before filling in the SSDT. Move the check before calling acpi_fill_ssdt() and remove the check in the individual drivers. BUG=None TEST=util/abuild/abuild Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-02soc/intel/common: Create common Intel FSP reset code blockSubrata Banik
Create SOC_INTEL_COMMON_FSP_RESET Kconfig to have IA common code block to handle platform reset request raised by FSP. The FSP will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that a reset is required. Make FSP_STATUS_GLOBAL_RESET depends on SOC_INTEL_COMMON_FSP_RESET. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I934b41affed7bb146f53ff6a4654fdbc6626101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02drivers/intel/fsp2_0: Add function to report FSP-T outputArthur Heymans
This allows to compare the FSP-T output in %ecx and %edx to coreboot's CAR symbols: Change-Id: I8d79f97f8c12c63ce215935353717855442a8290 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02drivers/wifi/generic: Use is_dev_enabled() instead of dev->enabledFurquan Shaikh
This change replaces the checks for dev->enabled with the helper function `is_dev_enabled()`. Change-Id: Iacceda396c9300bbfa124e76fb9c99d86313ea0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46904 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02wifi: Drop PCI IDs for JfP and HrPFurquan Shaikh
This change drops the PCI IDs for Jefferson Peak and Harrison Peak CNVi modules from wifi/generic drivers as well as pci_ids.h. These IDs actually represent the CNVi WiFi controller PCI IDs and are now supported by intel/common/block/cnvi driver. The only ID that is being dropped without adding support in intel/common/block/cnvi driver is PCI_DEVICE_ID_HrP_6SERIES_WIFI(0x2720) since this was not found in the list of PCI IDs for any SoC. Change-Id: I82857a737b65a6baa94fb3c2588fe723412a7830 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46866 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>