summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07drivers/i2c/tpm/cr50: Increase IRQ timeoutDuncan Laurie
Increase the IRQ timeout to prevent issues if there is a delay in the TPM responding to a command. Split the no-IRQ case out so it doesn't suffer unnecessarily. BUG=chrome-os-partner:59191 TEST=suspend/resume testing on eve board Change-Id: I1ea7859bc7a056a450b2b0ee32153ae43ee8699f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17204 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-31lib/prog_loaders: use common ramstage_cache_invalid()Aaron Durbin
All current implementations of ramstage_cache_invalid() were just resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE Kconfig option. Move that behavior to a single implementation within prog_loaders.c which removes duplication. Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17184 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27driver/intel/fsp2_0: Reset on invalid stage cache.Naresh G Solanki
Add config in fsp 2.0/1.1 driver to reset if ramstage stage cache is invalid during S3 resume. Change-Id: I83fe76957c061f20e9afb308e55923806fda4f93 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-26drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17092 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Re-factor SSDT generation codeFurquan Shaikh
1. Export i2c_generic_fill_ssdt to allow other device-specific i2c drivers to share and re-use the same code for generating AML code for SSDT. In order to achieve this, following changes are required: a. Add macro I2C_GENERIC_CONFIG that defines a structure with all generic i2c device-tree properties. This macro should be placed by the using driver at the start of its config structure. b. Accept a callback function to add any device specific information to SSDT. If generic driver is used directly by a device, callback would be NULL. Other devices using a separate i2c driver can provide a callback to add any properties to SSDT. 2. Allow device to provide _CID. BUG=chrome-os-partner:57846 Change-Id: I3a0054e22b81f9d6d407bef417eae5e9edc04ee4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17089 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Enable support for adding PowerResource for deviceFurquan Shaikh
Add support to allow a device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: 1. Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. 2. Reset delay - Delay after reset GPIO is de-asserted (default 0). 3. Enable GPIO - Optional, GPIO to enabled device. 4. Enable delay - Delay after enable GPIO is asserted (default 0). BUG=chrome-os-partner:55988 Change-Id: Ieb2dd95fc1f555f5de66f3dda425172ac5b75dad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17081 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-24drivers/i2c/generic: Return correct name for acpi_nameFurquan Shaikh
Return config->name if it is not NULL. BUG=chrome-os-partner:55988 Change-Id: I9ae229949b73de6f991383daae8d962d6cf457a7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17077 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-09drivers/intel/wifi: Add depends on ARCH_X86Martin Roth
When compiling a non-x86 platform with DRIVERS_INTEL_WIFI enabled, we get the build error: src/drivers/intel/wifi/wifi.c:17:30: fatal error: arch/acpi_device.h: No such file or directory acpi_device.h only exists in the x86 architecture directory. Change-Id: Id0e29558336bf44e638cfcb97c22f31683ea4ec7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16906 Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-10-07soc/intel/apollolake: Implement stage cache to improve resume timeBrandon Breitenstein
This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-07src/drivers: Remove whitespace after memcpy & memsetElyes HAOUAS
Change-Id: If79eb706b6d44f7c34dfe31a1545f5850870b334 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16866 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-07Gale: Fix the orange color to match the UX docSuresh Rajashekara
UX Doc = go/gale-hw-ui This color wasn't changed earlier as the change wasn't done in the OS also. However, since we cannot change this later in FW (but OS can change anytime), I am making this change after discussing with the UX team. BUG=b:31501528, b:31633562 TEST=Change the device state to 'recovery mode' to observe the new color. BRANCH=none Change-Id: Ia91f14eb77492095cb41a9de0bb9790e72aa4851 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36a3d8c6eabbc0b23d0a15d5bddc5ed3bdeebe70 Original-Change-Id: I88768b94cf91804a6005e44b1a168e059698ec4b Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/388206 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16767 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: LED changes as per UX team feedback.Suresh Rajashekara
Colors and patterns as defined by the UX team BUG=b:31501528 TEST=Move the device to different states in FW using rec and dev button and verify the colors BRANCH=None Change-Id: I66d41a54590cd3ce4e5202c7cfa890f462fe195e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 703559d5dddaeeb7d435d6cadbb2009a1b7a76c8 Original-Change-Id: I95ab1fa59b483396ff1498a28f1ee98ac08d02d7 Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387258 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06spi: Add a way to show SPI transfer speed for readsSimon Glass
SPI read speed directly impacts boot time and we do quite a lot of reading. Add a way to easily find out the speed of SPI flash reads within coreboot. Write speed is less important since there are very few writes and they are small. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru with SPI_SPEED_DEBUG set to 1. See the output messages: read SPI 627d4 7d73: 18455 us, 1740 KB/s, 13.920 Mbps Change-Id: Id3814bd2b7bd045cdfcc67eb1fabc861bf9ed3b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 82cb93f6be47efce3b0a3843bab89d2381baef89 Original-Change-Id: Iec66f5b8e3ad62f14d836a538dc7801e4ca669e7 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376944 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16701 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: Change LED configuration for Gale EVT3Suresh Rajashekara
Gale EVT3 has only one LED controller (earlier we had 2). Remove the support for the second controller and also the corresponding microcode. The color values used are the same as onHub (Arkham to be specific). BUG=b:30890905 TEST=Move the device to different states manually by appropriate actions (like dev mode, rec mode etc) and observe the different colors. BRANCH=None Change-Id: I853035610ea7ea7c8d29c30d2de13c9e2e786b2b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 593905d2d69daa7482318aa5f5c5cd7cf984043e Original-Change-Id: If8f22abd605faac6f6215ef600041740ce15ea0c Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/370821 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16697 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-05drivers/i2c/tpm/cr50: Initialize IRQ status handler before probeDuncan Laurie
Move the setup of the IRQ status handler so it will be set up properly before the early probe happens. BUG=chrome-os-partner:53336 Change-Id: I4380af1233d2a252899459635a3cb69ca196088d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16861 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-30Kconfig: Prefix hex defaults with 0xMartin Roth
Because these variables had "non-hexidecimal" defaults, they were updated by kconfig when writing defconfig files. Change-Id: Ic1a070d340708f989157ad18ddc79de7bb92d873 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16827 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30soc/intel/fsp_broadwell_de/uart: Drop itNico Huber
A copy of our uart8250io driver sneaked in with Broadwell-DE support. The only difference is the lack of initialization (due to FSP handling that). TEST=manually compared resulting object files Change-Id: I09be10b76c76c1306ad2c8db8fb07794dde1b0f2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16786 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30drivers/intel/fsp2_0: Fix debug display supportLee Leahy
Fix errors in debug display support. BRANCH=none BUG=None TEST=Build FSP 2.0 (SEC/PEI core with all FSP debug on) and run on Galileo Gen2 Change-Id: I2ece056d66dc8568a7b7206970f20368ec5bf147 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16809 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-28drivers/i2c/generic: Add config for marking device as probedDuncan Laurie
Add a config option to the generic I2C device driver to indicate to the OS that this device should be probed before being added. This can be used to provide ACPI device instantiations to devices that may not actually exist on the board. For example, if multiple trackpad vendors are supported on the same board they can both be described in ACPI and the OS will probe the address and load the driver only if the device responds to the probe at that address. BUG=chrome-os-partner:57686 Change-Id: I22cffb4b15f25d97dfd37dc58bca315f57bafc59 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-27intel/gma/vbt.c: pad the ID string with spaces.Arthur Heymans
The VBT id string is 20 characters long. If the string is shorter than 20 it needs spaces at the end. This change is cosmetic as all strings were padded by hand. Change-Id: Id6439f1d3dbd09319ee99ce9d15dbc3bcead1f53 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16739 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-21drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: Ic8f805159650c45382cacac8840450a1f8b4d7a1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16672 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: Ie2dfb7ede1bcda0e77070df945c47c1428115907 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16668 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifdcb3be0036b2c02bfbd1bcd326e9519d3726ee0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: I826a7f024f8d137453af86ba920e0a3a734f7349 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16666 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: Ia396fc48b8fe6e56e7071db9d74561de02b5b50e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16665 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: I6f9f71d501b60299edad4b16cc553a85391a1866 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16664 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: I3b62b680773d23cc5a7d2217b9754c6c28bccfa7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16663 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: Ie749f13562be753293448fee2c2d643797bf8049 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16662 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "drivers/i2c/tpm: Move common variables to header"Duncan Laurie
This reverts commit 64df72e8e2d1c086705325533767ca5e201e842a.
2016-09-19Revert "drivers/i2c/tpm: Split cr50 driver from main driver"Duncan Laurie
This reverts commit c565f9910707b91fcc7a27bab28806e558bb474d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Reduce max buffer size"Duncan Laurie
This reverts commit 97a2a1ece152b6d40a524361721405b77c37959d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up timeouts"Duncan Laurie
This reverts commit 93c778688f0bf2f90334505a3082a2cd4ce1623a.
2016-09-19Revert "drivers/i2c/tpm/cr50: Rename i2c read/write functions"Duncan Laurie
This reverts commit 6f5ceb26b9b3e1455ebbd6192e1d2c832bddc77e.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up locality functions"Duncan Laurie
This reverts commit 557e1a729a9ca89e814220b6203b7ac0dc446913.
2016-09-19Revert "drivers/i2c/tpm/cr50: Improve data handling and function names"Duncan Laurie
This reverts commit 1241e7db55aff313e56bf4546d969c11368b08a2.
2016-09-19Revert "drivers/i2c/tpm/cr50: Support interrupts for status"Duncan Laurie
This reverts commit a5e419c51187d24818f056327746a18676fe3a20.
2016-09-19drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: I9f78f520fd089cb4471d8826a8cfecff67398bf8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: I7e3912fb8d8c6ad17d1af2d2a7189bf7c0c52c8e Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifa1445224b475aec38c2ac56e15cb7ba7fcd21ea Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: Ib4a68ce1b3a83ea7c4bcefb9c6f002f6dd4aac1f Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: I77fdd7ea646b8b2fef449f07e3a08bcce174fe8b Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: Ia88facca607f3fd5072d0d986323fde075f15855 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: Ia9a65e72519b95f5739e3b7a16b9c2431d64ebe2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: I0febe98620d0ddd4ec6b46cd3073e48c12926266 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19driver/intel/fsp1_1: Utilise soc/intel/common for adding vbt.binNaresh G Solanki
Remove fsp1.1 driver code that adds vbt.bin & use soc/intel/common instead to add vbt.bin in cbfs. Also, VBT blob is added to CBFS as RAW type hence when walking the CBFS to find vbt.bin, search with type as RAW. Change-Id: I08f2556a34f83a0ea2b67b003e51dcace994361b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16610 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-15driver/intel/fsp20: move lb_framebuffer functionNaresh G Solanki
move lb_framebuffer function in soc/intel/apollolake to driver/intel/fsp20 so that fsp 2.0 bases soc's can use common lb_framebuffer function. Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15driver/intel/fsp2_0: Make FSP-M binary XIPRizwan Qureshi
If FSP_M_XIP is selected, then relocate FSP-M binary while adding it in CBFS so that it can be executed in place. Change-Id: I2579e8a9be06cfe8cc162337fb1064d15842229f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16563 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14drivers/i2c/tpm: Clean up handling of command readyDuncan Laurie
The TPM driver was largely ignoring the meaning of the command ready bit in the status register, instead just arbitrarily sending it at the end of every receive transaction. Instead of doing this have the command ready bit be set at the start of a transaction, and only clear it at the end of a transaction if it is still set, in case of failure. Also the cr50 function to wait for status and burst count was not waiting the full 2s that the existing driver does so that value is increased. Also, during the probe routine a delay is inserted after each status register read to ensure the TPM has time to actually start up. Change-Id: I1c66ea9849e6be537c7be06d57258f27c563c1c2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16591 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-12driver/fsp2_0: Include stdint header file in api.hNaresh G Solanki
'bool' type is reported undefined due to missing stdint.h inclusion, Fix it by including the same. Change-Id: Ib09c121471bd8c490442330a478145a7d1d8855f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16538 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-08intel/gma: Use defines for registers and values in edid.cSebastian "Swift Geek" Grzywna
This replaces magic values with defines without changing any value. Change-Id: I332442045aa4a28ffed88fc52a99a4364684f00c Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/16339 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-08drivers/i2c/tpm: Fix early TPM probeDuncan Laurie
The early TPM probe was done directly in tis.c ignoring the lower layer that provides appropriate access to the chip. Move this into a tpm_vendor_probe() function so it can use iic_tpm_read() with all of the built-in delays and semantics instead of calling i2c_readb() directly from the wrong layer. This fixes early init failures that were seen with the cr50 i2c tpm on the reef mainboard. Change-Id: I9bb3b820d10f6e2ea24c57b90cf0edc813cdc7e0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Fix error handling for tis structure not initializedDuncan Laurie
If the TPM completely fails to respond then the vendor structure may not have assigned handlers yet, so catch that case and return error so the boot can continue to recovery mode instead of asserting over and over. Change-Id: If3a11567df89bc73b4d4878bf89d877974044f34 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16416 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Add support for generating ACPI tableDuncan Laurie
Add code to generate an ACPI descriptor for an I2C TPM based on the device as described in devicetree.cb. This currently requires the devicetree to provide the HID, since we don't currently talk to the TPM in ramstage and I didn't want to add yet another init path for it here. This was tested on a reef board to ensure that the device is described properly in the SSDT. Change-Id: I43d7f6192f48e99a4074baa4e52f0a9ee554a250 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16397 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06drivers/i2c/tpm: Add support for cr50 TPMDuncan Laurie
Add support for the cr50 TPM used in apollolake chromebooks. This requires custom handling due to chip limitations, which may be revisited but are needed to get things working today. - timeouts need to be longer - must use the older style write+wait+read read protocol - all 4 bytes of status register must be read at once - same limitation applies when reading burst count from status reg - burst count max is 63 bytes, and burst count behaves slightly differently than other I2C TPMs - TPM expects the host to drain the full burst count (63 bytes) from the FIFO on a read Luckily the existing driver provides most abstraction needed to make this work seamlessly. To maximize code re-use the support for cr50 is added directly instead of as a separate driver and the style is kept similar to the rest of the driver code. This was tested with the cr50 TPM on a reef board with vboot use of TPM for secdata storage and factory initialization. Change-Id: I9b0bc282e41e779da8bf9184be0a11649735a101 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16396 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-06drivers/i2c/tpm: Allow sleep durations to be set by the chipDuncan Laurie
Allow the sleep durations used by the driver to be set by the specific chip so they can be tuned appropriately. Since we need to read the chip id to know the values use very conservative defaults for the first command and then set it to the current values by default. Change-Id: Ic64159328b18a1471eb06fa8b52b589eec1e1ca2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16395 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Make driver safe for use in x86 pre-ramDuncan Laurie
Use CAR accessors where needed for accessing static data. In some cases this required some minor restructuring to pass in a variable instead of use a global one. For the tpm_vendor_init the structure no longer has useful defaults, which nobody was depending on anyway. This now requires the caller to provide a non-zero address. Tested by enabling I2C TPM on reef and compiling successfully. Change-Id: I8e02fbcebf5fe10c4122632eda1c48b247478289 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16394 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02apollolake: relocate fsp header files to vendorcodeBrandon Breitenstein
FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02drivers/intel/fsp2_0: Make FSP Headers Consumable out of BoxBrandon Breitenstein
The following patch is based off of the UEFI 2.6 patch. The FSP header files are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated since the other headers expect it to be in the root of an includable directory. Any struct defines were removed since they are defined in the headers and no longer need to be explicity declared as struct with the UEFI 2.6 includes. BUG=chrome-os-partner:54100 BRANCH=none TEST=confirmed coreboot builds successfully Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com># Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16308 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31src/drivers: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I4d0087b2557862d04be54cf42f01b3223cb723ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16321 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31parade/ps8640: disable mipi mcsJitao Shi
Disable ps8640 mipi mcs function to avoid recognizing the normal mipi dsi signal as msc cmd. BUG=chrome-os-partner:56346 BRANCH=none TEST=build pass elm and show ui Change-Id: I91c690fb1ff3bd9b5c1f227205829c914347cd30 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4fd441b46300fea9f238b27c9c1cda4e9e53c80d Original-Change-Id: I85b9f1e6677e4bf8ab1e30c2e69445079fff2d18 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/373219 Original-Commit-Ready: Daniel Kurtz <djkurtz@chromium.org> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/16365 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31parade/ps8640: add delay to every loop when polling ps8640 readyJitao Shi
Add delay before and in polling ps8640 ready to reduce the frequency of polling. BUG=chrome-os-partner:54897 BRANCH=none TEST=build pass elm and show ui Change-Id: I43c833af910490e53496a343330a6a6af35623a9 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bc8c3d6f7cf0b2da693a465cf3845e8bbc53825a Original-Change-Id: I5c725eed8110ff9f545c1142ca28bcff336b6860 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/371718 Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/16364 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31driver/intel/fsp2.0: Add External stage cache region helperRizwan Qureshi
If ramstage caching outside CBMEM is enabled i.e CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM, then a helper function to determine the caching region in SMM should be implemented. Add the same to FSP2.0 driver. FSP1.1 driver had the same implementation hence copied stage_cache.c. The SoC code should implement the smm_subregion to provide the base and size of the caching region within SMM. The fsp/memmap.h provides the prototype and we will reuse the same from FPS 1.1. Change-Id: I4412a710391dc0cee044b96403c50260c3534e6f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16312 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-25vboot: consolidate google_chromeec_early_init() callsAaron Durbin
On x86 platforms, google_chromeec_early_init() is used to put the EC into RO mode when there's a recovery request. This is to avoid training memory multiple times when the recovery request is through an EC host event while the EC is running RW code. Under that condition the EC will be reset (along with the rest of the system) when the kernel verification happens. This leads to an execessively long recovery path because of the double reboot performing full memory training each time. By putting this logic into the verstage program this reduces the bootblock size on the skylake boards. Additionally, this provides the the correct logic for all future boards since it's not tied to FSP nor the mainboard itself. Lastly, this double memory training protection works only for platforms which verify starting from bootblock. The platforms which don't start verifying until after romstage need to have their own calls (such as haswell and baytrail). Change-Id: Ia8385dfc136b09fb20bd3519f3cc621e540b11a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16318 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-24drivers/spi: remove unconditional RW boot device initializationAaron Durbin
The SPI drivers for the various chipsets are not consistent in their handling of when they are accessible. Coupled with the unknown ordering of boot_device_init() being called this can lead to unexpected behavior (probing failures or hangs). Instead move the act of initializing the SPI flash boot device to when the various infrastructure requires its usage when it calls boot_device_rw(). Those platforms utilizing the RW boot device would need to ensure their SPI drivers are functional and ready when the call happens. This further removes any other systems failing to boot as reported in https://ticket.coreboot.org/issues/67. BUG=chrome-os-partner:56151 Change-Id: Ib3bddf5e26bf5322f3dd20345eeef6bee40f0f66 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16300 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-08-23drivers/spi: be sure to call spi_init() before spi_flash_probe()Aaron Durbin
It's necessary to call spi_init() prior to calling spi_flash_probe() such that the SPI drivers can do any work required prior to performing SPI transactions. It could be argued that the drivers should handle such situations, however the SPI API implementations seem to assume the callers ensured spi_init() was called before any SPI transactions. This fixes systems that failed to boot introduced by [1]. Issue tracked in https://ticket.coreboot.org/issues/67. [1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8 https://review.coreboot.org/16200 BUG=chrome-os-partner:56151 Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16297 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-20drivers/intel/fsp2_0: Add SMBIOS memory HOB supportRavi Sarawadi
Add SMBIOS memory GUID and functions to retrieve HOB. BUG=chrome-os-partner:55505 TEST='dmidecode -t 17' and 'mosys -k memory spd print all' Change-Id: Ie7e2239bb691c748d9fd852c3dc8cdc05243b164 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-19drivers/elog: use region_device for NV storageAaron Durbin
Instead of assuming SPI backing use a region_device to abstract away the underlying storage mechanism. BUG=chrome-os-partner:55932 Change-Id: I6b0f5a7e9bea8833fb1bca87e02abefab63acec3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16204 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19drivers/spi: provide optional implementation of boot_device_rw()Aaron Durbin
On many x86 platforms the boot device is SPI which is memory mapped. However, in order to write to the boot device one needs to use the SPI api. Therefore, provide a common implementation of boot_device_rw() which has no mmap() functionality. It only reads, writes, and erases. This will be used in the existing infrastructure but in a SPI agnostic way. Two options are added: 1. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP 2. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY The former is auto-selected when COMMON_CBFS_SPI_WRAPPER is not selected. The latter can be used to include the implementation in the early stages such as bootblock, verstage, and romstage. BUG=chrome-os-partner:56151 Change-Id: I2aa75f88409309e3f9b9bd79b52d27c0061139c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16200 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: include SPI flash modules for all stagesAaron Durbin
It shouldn't matter if COMMON_CBFS_SPI_WRAPPER is selected to include the SPI flash support in all stages. Therefore, include the SPI flash support files in all the stages. While there include the same set of files for all stages. They were out of sync for some reason. BUG=chrome-os-partner:56151 Change-Id: I933335104203315cbbcf965185a7c176974e6356 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16198 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: ensure SPI flash is boot device for coreboot tablesAaron Durbin
The spi_flash_probe() routine was setting a global varible unconditonally regardless if the probe was for the boot device or even if the boot devcie was flash. Moreover, there's no need to report the SPI information if the boot device isn't even SPI. Lastly, it's possible that the boot device is a SPI flash, but the platform may never probe (selecting SPI_FLASH) for the actual device connected. In that situation don't fill anything in as no correct information is known. BUG=chrome-os-partner:56151 Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16197 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19lib/cbfs_spi: provide boot_device_rw() supportAaron Durbin
Provide the RW boot device operations for the common cbfs SPI wrapper. The RW region_device is the same as the read-only one. As noted in the boot_device_rw() introduction patch the mmap() support should not be used in conjuction with writing as that results in incoherent operations. That's fine as the current mmap() support is only used in the cbfs layer which does not support writing, i.e. no cbfs regions would be written to with any previous or outstanding mmap() calls. BUG=chrome-os-partner:56151 Change-Id: I7cc7309a68ad23b30208ac961b1999a79626b307 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16199 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: move cbfs_spi.c locationAaron Durbin
The common boot device spi implementation is very much specific to SPI flash. As such it should be moved into that subdirectory. It's still a high-level option but it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally that allows the auto-selection of SPI_FLASH by a platform selecting COMMON_CBFS_SPI_WRAPPER which allows for culling of SPI_FLASH selections everywhere. BUG=chrome-os-partner:56151 Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16212 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16228 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19tpm2: Fixed typoRobert Foss
Fixed "intierface" typo. Change-Id: I65f0156ee059a8bed96c900ca3da3a06f45901e8 Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-on: https://review.coreboot.org/16252 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18Kconfig: lay groundwork for not assuming SPI flash boot deviceAaron Durbin
Almost all boards and chipsets within the codebase assume or use SPI flash as the boot device. Therefore, provide an option for the boards/chipsets which don't currently support SPI flash as the boot device. The default is to assume SPI flash is the boot device unless otherwise instructed. This falls in line with the current assumptions, but it also allows one to differentiate a platform desiring SPI flash support while it not being the actual boot device. One thing to note is that while google/daisy does boot with SPI flash part no SPI API interfaces were ever implemented. Therefore, mark that board as not having a SPI boot device. BUG=chrome-os-partner:56151 Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16191 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15Revert "Kconfig: separate memory mapped boot device from SPI"Aaron Durbin
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d. This was submitted out of order. Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16226 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-15drivers/spi: provide option to not include all flash driversAaron Durbin
All flash drivers are automatically included in the build unless COMMON_CBFS_SPI_WRAPPER was selected. However, there are cases where these drivers are unnecessary such as certain intel platforms where spi controller uses hardware sequencing without any ability to manually probe the device. Therefore, provide an option that the SoC can set the default value for. The COMMON_CBFS_SPI_WRAPPER option is still honored by not including all drivers when that is selected. BUG=chrome-os-partner:56151 Change-Id: Ie9aa447da450f7c8717545f05cff800139a9e2dd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16187 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16193 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14drivers/elog: provide more debug infoAaron Durbin
Provide more informative messages when CONFIG_ELOG_DEBUG is enabled as well as more informative error messages in the case of elog_scan_flash() failing. In the sync path the in-memory buffer is dumped in before the contents are read back from the non-volatile backing store and dumped again if the subsequent parsing fails. BUG=chrome-os-partner:55932 Change-Id: I716adfb246ef6fbefc0de89cd94b3c1310468896 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16184 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-12drivers/intel/fsp2_0: Fix FSP reset pathLee Leahy
Don't verify HOB list pointer or HOBs when FSP returns a reset request. BRANCH=none BUG=chrome-os-partner:56159 TEST=Build and run on Galileo Gen2. Change-Id: I6382f5ff92092623955806ebff340608c4ee156a Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11intel/fsp1_1: Use new per-region position overridePatrick Georgi
It cooperates better with the file sorting heuristic. Change-Id: I1c071243720352970dd2c4c2afed12451f91dcaa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16141 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10drivers/intel/fsp2_0: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: If7bfcea1af82209dcdc5a9f9f2d9334842c1595e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10drivers/intel/fsp1_1: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: Ib01aef448798e47ac613b38eb20bf25537b9221f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16128 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10elog: Ensure eventlog will always get initialized when configured inJulius Werner
Commit 0d9cd92e (chromeos: Clean up elog handling) removed the individual elog_init() calls from mainboards that did them and automated adding certain events through the boot state machine. Unfortunately, the new code would sometimes not log any specific event at all, and thereby also never call elog_init() (through elog_add_event()) which adds the "System boot" event. We can assume that any board that configures the eventlog at all actually wants to use it, so let's just add another call to elog_init() to the boot state machine so we can ensure it gets called at least once. BRANCH=None BUG=chrome-os-partner:56001 TEST=Booted Kevin, confirmed that eventlog code runs again. Change-Id: Ibe7bfc94b3e3d11ba881399a39f9915991c89d8c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16118 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-09drivers/elog: provide return status for all operationsAaron Durbin
Instead of relying on global state to determine if an error occurred provide the ability to know if an add or shrink operation is successful. Now the call chains report the error back up the stack and out to the callers. BUG=chrome-os-partner:55932 Change-Id: Id4ed4d93e331f1bf16e038df69ef067446d00102 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16104 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: clean up SMBIOS related codeAaron Durbin
Don't conditionally compile parts of the code. The unused pieces get culled by the linker, and the #if's just clutter things up. BUG=chrome-os-partner:55932 Change-Id: Ic18b2deb0cfef7167c05f0a641eae2f4cdc848ee Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: consolidate checks in elog_find_flash()Aaron Durbin
There were checks against global variables trying to determine failing cases of elog_find_flash(). Instead move the checks into elog_find_flash() and return value indicating failure. A minimum 4KiB check was added to ensure the eventlog is at least that size which makes the heuristic checks cleaner. BUG=chrome-os-partner:55932 Change-Id: I4d9d13148555e05d4f217a10f995831a0e437fc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16101 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09drivers/elog: remove unnecessary global stateAaron Durbin
There were 3 variables indicating the state of the event log region. However, there's no need to keep track of those individually. The only thing required is to know is if elog_scan_flash() failed. There's no other tracking required beyond that. BUG=chrome-os-partner:55932 Change-Id: I88ad32091d3c37966a2ac6272f8ad95bcc8c4270 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16100 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09drivers/elog: sync events to non-volatile storage lastAaron Durbin
There were multiple paths where writes and erases of the flash were being done. Instead provide a single place for synchronizing the non-volatile storage from the mirrored event log. This synchronization point resides as the very last thing done when adding an event to the log. The shrinking check happens before committing the event to non-volatile storage so there's no need to attempt a shrink in elog_init() because any previous events committed already honored the full threshold. BUG=chrome-os-partner:55932 Change-Id: Iaec9480eb3116fdc2f823c25d028a4cfb65a6eaf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16099 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08drivers/elog: treat offsets relative to start of mirrorAaron Durbin
Instead of treating offsets relative to after the header make the offsets relative to the in-memory mirror buffer. This simplifies the logic in that all offsets are treated the same. It also allows one to remove a global variable. BUG=chrome-os-partner:55932 Change-Id: I42491e05755d414562b02b6f9ae47f5c357d2f8a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16098 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08drivers/elog: use region_device for mirroring into ramAaron Durbin
A region_device can be used to represent the in-memory mirror of the event log. The region_device infrastructure has builtin bounds checking so there's no need to duplicate that. In addition, it allows for removing much of the math juggling for the buffer size, etc. BUG=chrome-os-partner:55932 Change-Id: Ic7fe9466019640b449257c5905ed919ac522bb58 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16097 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: use offsets for checking cleared buffersAaron Durbin
There's only 2 users of checking if the event buffer is cleared to the EOL value. Each were passing pointers of the in-memory mirror while also doing calculations for the size to check. Since the in-memory mirror is one big buffer the only thing required to know is the offset to start checking from. The check is always done through the end of the buffer. BUG=chrome-os-partner:55932 Change-Id: Icd4a7edc74407d6578fc93e9eb533abd3aa17277 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16096 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: perform writes in terms of offsetsAaron Durbin
Instead of taking pointers and back-calculating the proper offset perform writes in terms of the offsets within the elog region in flash. BUG=chrome-os-partner:55932 Change-Id: I5fd65423f5a6e03825c788bc36417f509b58f64d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16095 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-08-08drivers/elog: remove parameters from elog_flash_erase()Aaron Durbin
The elog_flash_erase() was only called to erase the entire elog region in flash. Therefore, drop the parameters and perform the full erase. BUG=chrome-os-partner:55932 Change-Id: I6590347ae60d407bc0df141e9196eb70532f8585 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16094 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>