summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2020-11-02soc/intel/common: Create common Intel FSP reset code blockSubrata Banik
Create SOC_INTEL_COMMON_FSP_RESET Kconfig to have IA common code block to handle platform reset request raised by FSP. The FSP will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that a reset is required. Make FSP_STATUS_GLOBAL_RESET depends on SOC_INTEL_COMMON_FSP_RESET. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I934b41affed7bb146f53ff6a4654fdbc6626101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02drivers/intel/fsp2_0: Add function to report FSP-T outputArthur Heymans
This allows to compare the FSP-T output in %ecx and %edx to coreboot's CAR symbols: Change-Id: I8d79f97f8c12c63ce215935353717855442a8290 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02drivers/wifi/generic: Use is_dev_enabled() instead of dev->enabledFurquan Shaikh
This change replaces the checks for dev->enabled with the helper function `is_dev_enabled()`. Change-Id: Iacceda396c9300bbfa124e76fb9c99d86313ea0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46904 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02wifi: Drop PCI IDs for JfP and HrPFurquan Shaikh
This change drops the PCI IDs for Jefferson Peak and Harrison Peak CNVi modules from wifi/generic drivers as well as pci_ids.h. These IDs actually represent the CNVi WiFi controller PCI IDs and are now supported by intel/common/block/cnvi driver. The only ID that is being dropped without adding support in intel/common/block/cnvi driver is PCI_DEVICE_ID_HrP_6SERIES_WIFI(0x2720) since this was not found in the list of PCI IDs for any SoC. Change-Id: I82857a737b65a6baa94fb3c2588fe723412a7830 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46866 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02drivers/wifi/generic: Add support for CNVi dummy device opsFurquan Shaikh
This change reorganizes drivers/wifi/generic to add a new device_operations structure for dummy CNVi device. This is done to make the organization of CNVi PCI device in devicetree consistent with all the other internal PCI devices of the SoC i.e. without a chip around the PCI device. Thus, with this change, CNVi entry in devicetree can be changed from: ``` chip drivers/wifi/generic register "wake" = "xxyyzz" device pci xx.y on end # CNVi PCI device end ``` to: ``` device pci xx.y on chip drivers/wifi/generic register "wake" = "xxyyzz" device generic 0 on end # Dummy CNVi device end end # CNVi PCI device ``` The helper functions for ACPI/SMBIOS generation are also accordingly updated to include _pcie_ and _cnvi_ in the function name. Change-Id: Ib3cb9ed9b81ff8d6ac85a9aaf57b641caaa2f907 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46862 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02drivers/wifi/generic: Split wifi_generic_fill_ssdt into two functionsFurquan Shaikh
This change splits `wifi_generic_fill_ssdt()` into following two functions: 1. `wifi_ssdt_write_device()`: This function writes the device, its address, _UID and _DDN. 2. `wifi_ssdt_write_properties()`: This function writes the properties for WiFi device like _PRW, regulatory domain and SAR. This split is done so that the device write can be skipped for CNVi devices in follow-up CLs. It will allow the SoC controller representation for CNVi PCI device to be consistent with other internal PCI devices in the device tree i.e. not requiring a chip driver for the PCI device. Because of this change, _PRW and SAR will be seen in a separate block in SSDT disassembly, but it does not result in any functional change. Observed difference: Before: Scope (\_SB.PCI0.PBR1) { Device (WF00) { Name (_UID, 0xAA6343DC) Name (_DDN, "WIFI Device") Name (_ADR, 0x0000000000000000) Name (_PRW, Package() { 0x08, 0x03 }) } } After: Device (\_SB.PCI0.PBR1.WF00) { Name (_UID, 0xAA6343DC) Name (_DDN, "WIFI Device") Name (_ADR, 0x0000000000000000) } Scope (\_SB.PCI0.PBR1.WF00) { Name (_PRW, Package() { 0x08, 0x03 }) } Change-Id: I8ab5e4684492ea3b1cf749e5b9e2008e7ec8fa28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02drivers/wifi/generic: Move ACPI functions to a separate fileFurquan Shaikh
This change reorganizes the WiFi generic driver to move the ACPI functions to a separate file. This change is done to reduce the noise in generic.c file and improve readability of the file. Change-Id: If5fafb5452fb5bad327be730fcfc43d8a5d3b8ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02drivers/wifi/generic: Move SMBIOS functions to a separate fileFurquan Shaikh
This change reorganizes the WiFi generic driver to move the SMBIOS functions to a separate file. This change is done to reduce the noise in generic.c file and improve readability of the file. Change-Id: I38ed46f5ae1594945d2078b00e8315d9234f36d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02drivers/wifi/generic: Use acpigen_write_ADR_pci_deviceFurquan Shaikh
This change uses the helper function `acpigen_write_ADR_pci_device()` to write _ADR object for the WiFi device. Change-Id: I3ba38f3ec4d8024209840e93bebf2d39bbef7685 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30soc/intel/xeon_sp: Move read_msr_ppin() to common util.cMarc Jones
Move CPX and SKX read_msr_ppin() to common util.c file. Update drivers/ocp/smbios #include to match. Change-Id: I4c4281d2d5ce679f5444a502fa88df04de9f2cd8 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30drivers/soundwire/alc711: Add Realtek ALC711 soundwire deviceAnil Kumar
Bug=None Test=Enabled the device on TGLY RVP and tested that the codec is reflected in SSDT. Checked sound card binding works and soundwire drivers are enabled in kernel. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ia7358927fe8531e609ebe070bef259a2bbc09093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-28drivers/mrc_cache: Fix size comparison in mrc_cache updateTim Wawrzynczak
`mrc_cache_needs_update` is comparing the "new size" of the MRC data (minus metadata size) to the size including the metadata, which causes the driver to think the data has changed, and so it will rewrite the MRC cache on every boot. This patch removes the metadata size from the comparison. BUG=b:171513942 BRANCH=volteer TEST=1) Memory training data gets written the on a boot where the data was wiped out. 2) Memory training data does not get written back on every subsequent boot. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7280276f71fdaa492c327b2b7ade8e53e7c59f51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-26src/drivers/ipmi: Add function to get BMC revisionTim Chu
Provide a way to get BMC revision. Tested=On OCP Delta Lake, function can get BMC revision well. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Iaaa4e8bf181a38452b53c83a762c7b648e95e643 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-10-26src: Include <arch/io.h> when appropriateElyes HAOUAS
Change-Id: I4077b9dfeeb2a9126c35bbdd3d14c52e55a5e87c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45404 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-22drivers/smmstore: Implement SMMSTORE version 2Patrick Rudolph
SMMSTORE version 2 is a complete redesign of the current driver. It is not backwards-compatible with version 1, and only one version can be used at a time. Key features: * Uses a fixed communication buffer instead of writing to arbitrary memory addresses provided by untrusted ring0 code. * Gives the caller full control over the used data format. * Splits the store into smaller chunks to allow fault tolerant updates. * Doesn't provide feedback about the actual read/written bytes, just returns error or success in registers. * Returns an error if the requested operation would overflow the communication buffer. Separate the SMMSTORE into 64 KiB blocks that can individually be read/written/erased. To be used by payloads that implement a FaultTolerant Variable store like TianoCore. The implementation has been tested against EDK2 master. An example EDK2 implementation can be found here: https://github.com/9elements/edk2-1/commit/eb1127744a3a5d5c8ac4e8eb76f07e79c736dbe2 Change-Id: I25e49d184135710f3e6dd1ad3bed95de950fe057 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-10-21drivers/intel/gma: Increase vbt_data sizeSrinidhi N Kaushik
With TGL FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Due to which cbfsf_decompression_info check failed when trying to load vbt binary from cbfs because vbt decompressed_size was greater than vbt_data size. This caused Graphics init and fw screen issues. Increase the vbt_data to 9KiB to accommodate new vbt binary. BUG=b:170656067 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: If6ffce028f9e8bc14596bbc0a3f1476843a9334e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-20mrc_cache: Remove unnecessary data checksum calculationShelley Chen
When MRC_SAVE_HASH_IN_TPM is selected, we can just use the TPM hash to verify the MRC_CACHE data. Thus, we don't need to calculate the checksum anymore in this case. BUG=b:150502246 BRANCH=None TEST=make sure memory training still works on nami Change-Id: I1db4469da49755805b541f50c7ef2f9cdb749425 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-20mrc_cache: Add tpm_hash_index field to cache_region structShelley Chen
Pull selection of tpm hash index logic into cache_region struct. This CL also enables the storing of the MRC hash into the TPM NVRAM space for both recovery and non-recovery cases. This will affect all platforms with TPM2 enabled and use the MRC_CACHE driver. BUG=b:150502246 BRANCH=None TEST=make sure memory training still works on nami and lazor Change-Id: I1a744d6f40f062ca3aab6157b3747e6c1f6977f9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-20security/vboot: Make mrc_cache hash functions genericShelley Chen
We need to extend the functionality of the mrc_cache hash functions to work for both recovery and normal mrc_cache data. Updating the API of these functions to pass in an index to identify the hash indices for recovery and normal mode. BUG=b:150502246 BRANCH=None TEST=make sure memory training still works on nami Change-Id: I9c0bb25eafc731ca9c7a95113ab940f55997fc0f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-20mrc_cache: Move mrc_cache_*_hash functions into mrc_cache driverShelley Chen
This CL would remove these calls from fsp 2.0. Platforms that select MRC_STASH_TO_CBMEM, updating the TPM NVRAM space is moved from romstage (when data stashed to CBMEM) to ramstage (when data is written back to SPI flash. BUG=b:150502246 BRANCH=None TEST=make sure memory training still works on nami Change-Id: I3088ca6927c7dbc65386c13e868afa0462086937 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-20mrc_cache: Add config MRC_SAVE_HASH_IN_TPMShelley Chen
Use this config to specify whether we want to save a hash of the MRC_CACHE in the TPM NVRAM space. Replace all uses of FSP2_0_USES_TPM_MRC_HASH with MRC_SAVE_HASH_IN_TPM and remove the FSP2_0_USES_TPM_MRC_HASH config. Note that TPM1 platforms will not select MRC_SAVE_HASH_IN_TPM as none of them use FSP2.0 and have recovery MRC_CACHE. BUG=b:150502246 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ic5ffcdba27cb1f09c39c3835029c8d9cc3453af1 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19security/vboot: Rename mem_init.h to mrc_cache_hash_tpm.hShelley Chen
As ongoing work for generalizing mrc_cache to be used by all platforms, we are pulling it out from fsp 2.0 and renaming it as mrc_cache_hash_tpm.h in security/vboot. BUG=b:150502246 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I5a204bc3342a3462f177c3ed6b8443e31816091c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19drivers/i2c/gpiomux: Add chip driver for multiplexed I2C busKarthikeyan Ramasubramanian
This chip driver adds ACPI identifiers for multiplexed I2C bus that are selected using GPIO. The multiplexed bus device defines the address to select the I2C lines. These ACPI identifiers are consumed by the i2c-mux-gpio kernel driver: https://www.kernel.org/doc/html/latest/i2c/muxes/i2c-mux-gpio.html BUG=b:169444894 TEST=Build and boot to OS in waddledee. Ensure that the ACPI identifiers are added in appropriate context. Scope (\_SB.PCI0.I2C3.MUX0) { Device (MXA0) { Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_ADR, Zero) // _ADR: Address } } Scope (\_SB.PCI0.I2C3.MUX0) { Device (MXA1) { Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_ADR, One) // _ADR: Address } } Change-Id: If8b983bc8ce212ce05fe6b7f01a6d9092468e582 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19drivers/i2c: Add chip driver for GPIO based I2C multiplexerKarthikeyan Ramasubramanian
Add identifiers in ACPI tables for GPIO based I2C multiplexer. The multiplexer device defines the GPIO resource used to select the adapter/bus lines. The multiplexer adapter device defines the address to select the adapter/client lines. These ACPI identifiers are consumed by the i2c-mux-gpio kernel driver: https://www.kernel.org/doc/html/latest/i2c/muxes/i2c-mux-gpio.html BUG=b:169444894 TEST=Build and boot waddledee to OS. Ensure that the ACPI identifiers are added for I2C devices multiplexed using I2C MUX under the appropriate scope. Here is the output SSDT: Scope (\_SB.PCI0.I2C3) { Device (MUX0) { Name (_HID, "PRP0001") // _HID: Hardware ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0125 } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x02) { Package (0x02) { "compatible", "i2c-mux-gpio" }, Package (0x02) { "mux-gpios", Package (0x04) { \_SB.PCI0.I2C3.MUX0, Zero, Zero, Zero } } } }) } } Change-Id: Ib371108cc6043c133681066bf7bf4b2e00771e8b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19drivers/intel/usb4: Add driver for USB4 retimer deviceDuncan Laurie
The USB4 retimer device needs to declare a _DSM with specific functions that allow for GPIO control to turn off the power when an external device is not connected. This driver allows the mainboard to provide the GPIO that is connected to the power control. BUG=b:156957424 Change-Id: Icfb85dc3c0885d828aba3855a66109043250ab86 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44918 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19drivers/camera: Add config CHROMEOS_CAMERAYu-Ping Wu
Add cros_camera_info struct for camera information, and check_cros_camera_info() for checking the magic, CRC and version. BUG=b:144820097 TEST=emerge-kukui coreboot BRANCH=kukui Change-Id: I1215fec76643b0cf7e09433e1190e8bd387e6953 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46042 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13drivers: snsn65dsi86: Fix link rate parsingJulius Werner
DP link rates are reported in an array of LE16 values. The current code tries to parse them as 8-bit which doesn't get very far, causing us to always drop into the fallback path. This patch should fix the issue (+minor whitespace cleanup). BUG=b:170630766 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1e03088ee2d3517bdb5dcc4dcc4ac04f8b14a391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2020-10-13drivers/wifi/generic: Do not generate SAR tables for non-Intel WiFiFurquan Shaikh
CBFS SAR and SAR tables in ACPI are currently supported only by Intel WiFi devices. This change adds a check in `emit_sar_acpi_structures()` to ensure that the PCI vendor for the device is Intel before generating the SAR tables. BUG=b:169802515 BRANCH=zork Change-Id: Ibff437893a61ac9557cff243a70230f101089834 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46040 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13drivers/wifi/generic: Limit scope of ACPI-related functions to generic.cFurquan Shaikh
This change limits the scope of `wifi_generic_fill_ssdt()` and `wifi_generic_acpi_name()` to generic.c since they are not used outside of this file anymore. Also, since there is no need to split SSDT generator into two separate functions, `wifi_generic_fill_ssdt_generator()` is dropped and `.acpi_fill_ssdt` directly points to `wifi_generic_fill_ssdt()`. BUG=b:169802515 BRANCH=zork Change-Id: I2cbb97f43d2d9f9ed6d3cf8f0a9b13a7f30e922e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46038 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13drivers/{intel/wifi,wifi/generic}: Drop separate Intel WiFi driverFurquan Shaikh
Currently, drivers/intel/wifi is a PCI driver (provides `struct pci_driver`) as well as a chip driver (provides `struct chip_operations`). However, there is no need for a separate chip driver for the WiFi device since drivers/wifi/generic already provides one. Having two separate chip drivers makes it difficult to multi-source WiFi devices and share the same firmware target without having to add a probe property for each of these devices. This is unnecessary since the WiFi driver in coreboot is primarily responsible for: 1. PCI resource allocation 2. ACPI SSDT node generation to expose wake property and SAR tables 3. SMBIOS table generation For the most part, coreboot can perform the above operations without really caring about the specifics of which WiFi device is being used by the mainboard. Thus, this change drops the driver for intel/wifi and moves the PCI driver support required for Intel WiFi chips into drivers/wifi/generic. The PCI driver is retained for backward compatibility with boards that never utilized the chip driver to support Intel WiFi device. For these devices, the PCI driver helps perform the same operations as above (except exposing the wake property) by utilizing the same `wifi_generic_ops`. This change also moves DRIVERS_INTEL_WIFI config to wifi/generic/Kconfig. BUG=b:169802515 BRANCH=zork Change-Id: I780a7d1a87f387d5e01e6b35aac7cca31a2033ac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46036 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13wifi: Move addition of CBFS SAR file to wifi/generic/Makefile.incFurquan Shaikh
This change moves the addition of CBFS SAR file from intel/wifi/Makefile.inc to wifi/generic/Makefile.inc to keep it in the same sub-directory as the Kconfig definition. BUG=b:169802515 BRANCH=zork Change-Id: I7ee33232b6a07bbf929f3a79fabe89130fb6fa6f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-13drivers/{wifi/generic,intel/wifi}: Drop dependency on HAVE_ACPI_TABLESFurquan Shaikh
This change drops the dependency of DRIVERS_WIFI_GENERIC on HAVE_ACPI_TABLES as the driver provides operations other than the ACPI support for WiFi devices. Since the dependency is now dropped, ACPI operations in generic.c are guarded by CONFIG(HAVE_ACPI_TABLES). BUG=b:169802515 BRANCH=zork Change-Id: I16444a9d842a6742e3c97ef04c4f18e93e6cdaa9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46037 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13drivers/wifi/generic: Add support for generating SMBIOS dataFurquan Shaikh
This change adds support in generic WiFi driver in coreboot to generate SMBIOS data for the WiFi device. Currently, this is used only for Intel WiFi devices and the function is copied over from Intel WiFi driver in coreboot. This change is done in preparation for getting rid of the separate chip driver for Intel WiFi in coreboot. BUG=b:169802515 BRANCH=zork Change-Id: If3c056718bdc57f6976ce8e3f8acc7665ec3ccd7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-13src: Rename EM100Pro-specific SPI console Kconfig optionAngel Pons
To avoid confusion with `flashconsole` (CONSOLE_SPI_FLASH), prefix this option with `EM100Pro`. Looks like it is not build-tested, however. Change-Id: I4868fa52250fbbf43e328dfd12e0e48fc58c4234 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-11drivers/i2c/nct7802y: Configure remote diodes and local sensorMaxim Polyakov
The patch allows to configure sensors with a remote diode connected and a on-chip local temperature sensor from the devicetree for the board that uses this HWM. According to the documentation [1], this is done by setting the corresponding bits in the Mode Selection Register (22h). It is necessary for some Intel processors (Apollo Lake SoC) that do not support PECI and the CPU temperature is taken from the thermistor. TEST = After loading the nct7802 module on the Kontron mAL-10 [2] with Linux OS, we can see configuration of the HWM with one sensor in the thermistor mode: user@user-apl:~$ sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 0: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 1: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 2: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 3: +41.0°C (high = +110.0°C, crit = +110.0°C) nct7802-i2c-0-2e Adapter: SMBus CMI adapter cmi in0: +3.35 V (min = +0.00 V, max = +4.09 V) in1: +1.92 V in3: +1.21 V (min = +0.00 V, max = +2.05 V) in4: +1.68 V (min = +0.00 V, max = +2.05 V) fan1: 0 RPM (min = 0 RPM) fan2: 868 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) temp1: +42.5°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) sensor = thermistor temp4: +44.0°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) temp6: +0.0°C [1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y with PECI 3.0 interface, datasheet, revision 1.2, february 2012 [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39766 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/wifi/generic: Log WiFi wake source to event logFurquan Shaikh
This change adds a call to `pci_dev_is_wake_source()` to determine and log WiFi wake source to event log just like the Intel WiFi driver does. This is done in preparation to merge the generic and Intel WiFi drivers in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I20528ae1f72ca633da31e01d777c46fd5f4a337f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/intel/wifi: Use newly added pci_dev_is_wake_sourceFurquan Shaikh
This change uses the newly added `pci_dev_is_wake_source()` helper function to determine and log WiFi wake source instead of assuming a hard-coded register value to check. This is done in preparation to merge the generic WiFi and Intel WiFi drivers in coreboot in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I9bdb453092b4ce7bdab2969f13e0c0aa8166dc0a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-09sc7180: Remove the delay to force hpd detection and always disable HPDVinod Polimera
HPD on this bridge chip is a bit useless. This is an eDP bridge so the HPD is an internal signal that's only there to signal that the panel is done powering up. But the bridge chip debounces this signal by between 100 ms and 400 ms (depending on process, voltage, and temperate). One particular panel asserted HPD 84 ms after it was powered on meaning that we saw HPD 284 ms after power on. Assume that the panel driver will have the hardcoded delay in its prepare and always disable HPD. Change-Id: Iea7dd75b57fa55ec182c0bee09b0f35208357892 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09mrc_cache: Change mrc_cache_load_current to return size of entryShelley Chen
Modify mrc_cache_load current to return the size of the mrc_cache entry so that caller will know what the actual size of the data returned is. This is needed for ARM devices like trogdor, which need to know the size of the training data when populating the QcLib interface table. BUG=b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a Change-Id: Ia314717ad2a7d5232b37a19951c1aecd7f843c27 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-07drivers/intel/wifi: Drop call to pci_dev_initFurquan Shaikh
`pci_dev_init()` is used to load and run option ROM on VGA class devices (PCI_CLASS_DISPLAY_VGA). WiFi device is not a VGA class device and hence the call to `pci_dev_init()` is not required. This change drops the call to `pci_dev_init()` from `wifi_pci_dev_init()` in Intel WiFi driver. BUG=b:169802515 BRANCH=zork Change-Id: I6588ea0a5c848904088d05fd1cbdf677b2dc8ea9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-07drivers/wifi/generic: Use pci_dev_* operations for device opsFurquan Shaikh
WiFi devices supported by the generic WiFi driver are PCIe devices which need to be managed using the standard pci_dev_* operations to read, set and enable resources. This change updates the device_operations structure `wifi_generic_ops` to use the standard pci_dev_* operations for these devices. BUG=b:169802515 BRANCH=zork Change-Id: I8b306259e205ecb963c0563000bd96ec6b978b8b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-06drivers/ipmi/ocp/ipmi_ocp.c: Clean up includesMarc Jones
Remove #include "chip.h", which is not needed and causes a build problem in a later change. Alphabetise the #includes. Add <types.h>. Change-Id: If19ccd144bd352a196adccd75f9f6f139eae4e4a Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45968 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-02mrc_cache: Update mrc_cache data in romstageShelley Chen
Previously, we were writing to cbmem after memory training and then writing the training data from cbmem to mrc_cache in ramstage. We were doing this because we were unable to read/write to SPI simultaneously on older x86 chips. Now that newer chips allow for simultaneously reads and writes, we can move the mrc_cache update into romstage. This is beneficial if there is a reboot for some reason after memory training but before the previous mrc_cache_stash_data call originally in ramstage. If this happens, we would lose all the mrc_cache training data in the next boot even though we've already performed the memory training. Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't do mmapping but still want to use the cbmem to store the mrc_cache data in order to write the mrc_cache data back at a later time. We are maintaining the use of cbmem for these older platforms because we have no way of validating the earlier write back to mrc_cache at this time. BUG=b:150502246 BRANCH=None TEST=reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I3430bda45484cb8c2b01ab9614508039dfaac9a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44196 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-02drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES configShelley Chen
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't allow writing to SPI flash when early stages are running XIP from flash. If BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected, BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms that write to flash in the earlier stages, assuming that they have that capability. BUG=b:150502246 BRANCH=None TEST=diff the coreboot.rom files resulting from running ./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless with and without this change to make sure that there was no difference. Also did this for GOOGLE_CANDY board, which is baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES enabled). Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-02drivers/intel/fsp2_0: use FSP to allocate APEI BERT memory regionJonathan Zhang
APEI (ACPI Platform Error Interface) defines BERT (Boot Error Record Table) memory region: * Bootloader (firmware) generates UEFI CPER (Common Platform Error Record) records, and populates BERT region. * OS parses ACPI BERT table, finds the BERT region address, inteprets the data and processes it accordingly. When CONFIG_ACPI_BERT is defined, update FSP UPD BootLoaderTolumSize, so FSP allocates memory region for it. The APEI BERT region is placed on top of CBMEM, for the size of CONFIG_ACPI_BERT_SIZE. Apart from APEI BERT region, we also have plan to add APEI HEST region which holds OS runtime hardware error record, based on firmware first hardware error handling model. HEST region will be reserved same way as BERT region. Note that CBMEM region can not be used for such purpose, the OS (bert/hest) drivers are not able to access data held in CBMEM region, as CBMEM is set as type 16 (configuration table). An option considered was to reserve the BERT region under CBMEM. However, we do not know the size of CBMEM till acpi tables are set up. On the other hand, BERT region needs to be filled up before ACPI BERT table is finalized. Change-Id: Ie72240e4c5fa01fcf937d33678c40f9ca826487a Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-01drivers: sn65dsi86: Retry link training up to 10 timesJulius Werner
The kernel guys have found that automatic link training from this bridge can occasionally fail and needs to be retried. They have added up to 10 retries just to be sure, so let's do the same in coreboot. BUG=b:169535092 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I713b6851bd51d3527ed4c6e6407dee6b42d09955 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45882 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-30drivers/pc80/rtc: Fix linking verstage (and use `all` target)Nico Huber
`option.c` was already linked into verstage but needs `mc146818rtc.c` to work. While we are at it, also make use of the `all` target. Change-Id: I8f545e036962ed0716bcd3b9a5b5d06e18a367f6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45802 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28drivers/spi: Check return value for error handlingJohn Zhao
Coverity detects calling function spi_sdcard_do_command without checking return value. Fix this issue by checking return value for error handling. Found-by: Coverity CID 1407737 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie0d28806b5c0b4c6d509e583d115358864eeff80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-21drivers/intel/fsp2_0: Add CONFIG_FSP_STATUS_GLOBAL_RESETSubrata Banik
Add CONFIG_FSP_STATUS_GLOBAL_RESET Kconfig to get correct FSP global reset type from respective SoC Kconfig. Supported value: 0x40000003-0x40000008, These are defined in FSP EAS v2.0 section 11.2.2 - OEM Status Code Unsupported value: 0xFFFFFFFF Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Idc04eb3a931d2d353808d02e62bd436b363600d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21src/drivers: Drop unneeded empty linesElyes HAOUAS
Change-Id: I202e5d285612b9bf237b588ea3c006187623fdc3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-21drivers/intel/mipi_camera: Avoid resource leakJohn Zhao
Coverity detects variable dsd going out of scope leaks the storage it points to. Move dsd resource allocation after sanity check for config->nvm_compact to avoid leak. Found-by: Coverity CID 1432727 TEST=Built and boot up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I86af322dc78845b8b312b6815135336c2c56b4dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-18drivers/genesyslogic/gl9755: Add driver for Genesys Logic GL9755Ben Chuang
The device is a PCIe Gen2 to SD 4.0 card reader controller to be used in the Chromebook. The datasheet name is GL9755S and the revision is 05. The patch sets LTR value. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-16drivers/intel/mipi_camera: Add compatible field for NVMPandya, Varshit B
Add compatible field for NVM Make PRP0001 as default HID if device type is INTEL_ACPI_CAMERA_NVM Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Iad7afa7b3170982eb5d6215e766f3e98f7a89213 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16drivers/spi/tpm: Improve error checkingCaveh Jalali
This adds error checking in paths that previously ignored TPM communication errors. We hit this case occasionally during "Checking cr50 for pending updates"; previously we would go down this path and eventually time out using MAX_STATUS_TIMEOUT, which is 2 minutes. Now, we detect the failure and return with an error indication instead of timing out after a long time. The root cause of the communication error is an open issue. BUG=b:168090038 TEST=booted on volteer, observed error handling when "Checking cr50 for pending updates" fails. Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: Ia8a1202000abce1857ee694b06b1478e6b045069 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jes Klinke <jbk@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-16drivers/aspeed/common: Reduce severity of `EDID not found` log messageAngel Pons
Servers often run headless, so a missing EDID isn't a problem. However, we still need to initialize a framebuffer for the BMC's KVM function. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: Ice17bf6fdda0ce34e686dbf8f3a1fa92ba869d7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-14drivers/elog: Remove ELOG_PRERAM configShelley Chen
This change is being done for the following reasons: 1. The CONFIG_ELOG_PRERAM is unused. 2. We need to pull in elog.c into romstage because we are pulling the mrc_cache_stash_data function into romstage. 3. Furquan says that we can rely on the linker to optimize out the unused 4KiB buffer in the early stages of boot, which allows us to get rid of the ELOG_PRERAM config. BUG=b:117884485, b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a -v Change-Id: Id76cabc38e41e9bf79e1580a530c871a4ecef4ec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45303 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-12include/console/uart: make index parameter unsignedFelix Held
The UART index is never negative, so make it unsigned and drop the checks for the index to be non-negative. Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-10sc7180: Add support for sn65dsi86 bridgeVinod Polimera
Add sn65dsi86 bridge driver to enable the eDP bridge. Datasheet used : https://www.ti.com/lit/ds/sllseh2b/sllseh2b.pdf Changes in V1: - fix the dp lanes using mask - separate out the refclk and hpd config to init function Change-Id: I36a68f3241f0ba316c261a73c2f6d30fe6c3ccdc Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09drivers/ipmi: Add CONFIG_IPMI_KCS_TIMEOUT_MS for IPMI KCS timeout valueJohnny Lin
With the current timeout of 1000 cycles of 100 microsecond would see timeout occurs on OCP Delta Lake if the log level is set to values smaller than 8. Because the prink(BIOS_SPEW, ..) in ipmi_kcs_status() creates delay and avoid the problem, but after setting the log level to 4 we see some timeout occurs. The unit is millisecond and the default value is set to 5000 according to IPMI spec v2.0 rev 1.1 Sec. 9.15, a five-second timeout or greater is recommended. Tested=On OCP Delta Lake, with log level 4 cannot observe timeout occurs. Change-Id: I42ede1d9200bb5d0dbb455d2ff66e2816f10e86b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45103 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09drivers/aspeed/common: Support disabled P2A bridgePatrick Rudolph
This ports Linux commit 71f677a91046599ece96ebab21df956ce909c456 "Handle configuration without P2A bridge". Quote: The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". P2A stands for primary to AHB. Tested on Prodrive Hermes, which uses an AST2500. The machine still boots, has a high resolution framebuffer working in EDK2, and its boot time has been reduced by 2.5 seconds as it no longer runs into a timeout due to disabled P2A bridge. Change-Id: I3293dc35ae89c010154e02eff904ec3a68c96683 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-09-07drivers/mrc_cache: Reduce severity of `region not found` log messageAngel Pons
On autogenerated FMAPs, there's no `UNIFIED_MRC_CACHE` region. The current code will print a spurious error message about it, though. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: I0961bb2a7d2d81dc5c0d28f6e6c29b320421fc3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45076 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06soc/intel/apl: Add panel power and backlight configurationNico Huber
Change-Id: Id8892ac7aafce1006831e2d9f2806919f5950756 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-31{intel/gma,include/device}: Delete unused 'drm_dp_helper.h' fileElyes HAOUAS
'drm_dp_helper.h' file is duplicated and not used. Change-Id: Ibb08f7ff91c3914940dfe899be331b06e292c7c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-24mrc_cache: Move mrc_cache_stash_data to end of fileShelley Chen
We need to pull update_mrc_cache into mrc_cache_stash_data, so moving to end of the file to make sure update_mrc_cache is defined before. BUG=b:150502246 BRANCH=None TEST=Testing on a nami (x86) device: reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I9e14fec96e9dabceafc2f6f5663fc6f1023f0395 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-24mrc_cache: Add mrc_cache fetch functions to support non-x86 platformsShelley Chen
Create two new functions to fetch mrc_cache data (replacing mrc_cache_get_current): - mrc_cache_load_current: fetches the mrc_cache data and drops it into the given buffer. This is useful for ARM platforms where the mmap operation is very expensive. - mrc_cache_mmap_leak: fetch the mrc_cache data and puts it into a given buffer. This is useful for platforms where the mmap operation is a no-op (like x86 platforms). As the name mentions, we are not freeing the memory that we allocated with the mmap, so it is the caller's responsibility to do so. Additionally, we are replacing mrc_cache_latest with mrc_cache_get_latest_slot_info, which does not check the validity of the data when retrieving the current mrc_cache slot. This allows the caller some flexibility in deciding where they want the mrc_cache data stored (either in an mmaped region or at a given address). BUG=b:150502246 BRANCH=None TEST=Testing on a nami (x86) device: reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I259dd4f550719d821bbafa2d445cbae6ea22e988 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44006 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-22drivers/spi/tpm: Add helper to get cr50 firmware versionKarthikeyan Ramasubramanian
Introduce a helper to get the cached cr50 firmware version. This information is in turn used to identify the strap configuration supported by Cr50. BUG=None TEST=Ensure that Drawcia board boots to OS. Ensure that the version cached cr50 firmware version is returned. Change-Id: Id84b152993f253878a6c133cc433a0da2c990cf2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44653 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-20drivers/spi/tpm: Enable long cr50 ready pulses for Tiger Lake systemsJes Klinke
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4 only if we know that the Cr50 is generating 100us interrupt pulses. We have to do so, because the SoC is not guaranteed to detect pulses shorter than 100us in S0i3.4 substate. A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, provided that Cr50 firmware is new enough to support the register. BUG=b:154333137 TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Change-Id: If83188fd09fe69c2cda4ce1a8bf5b2efe1ca86da Reviewed-on: https://review.coreboot.org/c/coreboot/+/43741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Ic09fc4ff4ee5524d89366e28d1d22900dd0c5b4d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unuse '<timestamp.h>Elyes HAOUAS
Change-Id: I4fa03c4576bb0256b73f1d36ca840e120b750a74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<option.h>'Elyes HAOUAS
Change-Id: Icb79d60e9ec70a0780d5231698b88cff1db72c9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-17src: Use PCI_BASE_ADDRESS_* macros instead of magic numbersElyes HAOUAS
Change-Id: Id3390c5ac6a9517ffc2d202f41802e6f4d2e314c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44371 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17drivers/intel/fsp2_0/hand_off_block: Remove dead decrementElyes HAOUAS
Value stored to 'size' is never read. Also drop unused parameter. Change-Id: If3e96ac90f06966ee408964e0748730bc237ec19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17drivers/usb: Replace return value -10 with variableJohn Zhao
Coverity detects that value assigned to variable "ret" is overwritten before it is used. Fix the issue by returning right value. Found-by: Coverity CID 1255942, 1241836 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I2e1fb5400ff64c6178bb30601896780f8d67b5c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44185 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13drivers/intel/fsp2_0: don't select FSP_USES_CB_STACK on FSP 2.0 platformFelix Held
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0 based, so it doesn't reuse coreboot's stack, but sets up its own stack. In contrast to all other FSP 2.0 based platforms, this stack isn't in the CAR region, since AMD Picasso doesn't support CAR and the DRAM is already available when the x86 cores are released from reset. Selecting FSP_USES_CB_STACK ended up doing the right thing, but is semantically wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso we take the corresponding code path if ENV_CACHE_AS_RAM is false which is only the case for non-CAR platforms. BUG=b:155501050 TEST=Timeless build results in an identical binary for amd/mandolin, asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases here. Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-08-13drivers/intel/fsp2_0: Fill EFI_CPU_PHYSICAL_LOCATION structure informationSubrata Banik
Latest EDK2 code inside "UefiCpuPkg\Library\RegisterCpuFeaturesLib\CpuFeaturesInitialize.c" is now looking for EFI_CPU_PHYSICAL_LOCATION structure variables hence coreboot need to fill required information (package, core and thread count). TEST=Able to see package, core and thread information as part of FSP debug log. Change-Id: Ieccf20a116d59aaafbbec3fe0adad9a48931cb59 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-08-06drivers/intel/fsp2_0: Do AP re-init after FSP-S if USE_INTEL_FSP_MP_INIT enableSubrata Banik
This patch ensures that coreboot is able to take control of APs back by doing a full AP re-initialization after FSP-S is done. TEST=Able to see all cores available after booting to OS using below command when coreboot is built with USE_INTEL_FSP_MP_INIT enable. > cat /proc/cpuinfo Without this CL : shows only 1 core (only BSP) With this CL : shows all possible cores available (BSP + APs) Change-Id: I247d8d1166c77bd01922323b6a0f14ec6640a666 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-05drivers/intel/mipi_camera: Fix SSDT generation for IPU devicesSugnan Prabhu S
Includes changes in mipi_camera driver to fix following issues related to SSDT generation for IPU devices. 1. acpigen_write_device was not getting called for IPU devices 2. acpigen_pop_len was called for a generic devices without calling acpigen_write_device Change-Id: I309edd065719cb8250f1241898bb5854004d2a9f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05drivers/genesyslogic/gl9763e: Add driver for Genesys Logic GL9763EBen Chuang
The device is a PCIe to eMMC bridge controller to be used in the Chromebook as the boot disk. The datasheet name is GL9763E and the revision is 02. The patch sets single request AXI, disables ASPM L0s and enables SSC. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-03drivers/ipmi/ocp: Add ipmi set processor informationTim Chu
Implement setting processor information to BMC based on document YosemiteV3_BMC_Feature_Spec_v1.7. TEST=Use get command in OpenBMC to check. Command and information are shown as below: root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 1 DC 11 00 47 65 6E 75 69 6E 65 20 49 6E 74 65 6C 28 52 29 20 43 50 55 20 30 30 30 30 25 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 2 DC 11 00 1A 34 00 DC 05 41 30 root@bmc-oob:~# Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I3d53ac241a11ca962572816283a0c653fcde9f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-03drivers/amd/i2s_machine_dev: return if scope is NULLMartin Roth
Avoid dereferencing a null pointer. Found-by: Coverity CID 1430549 BUG=None TEST=Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I53f6a38aac6e7f94c3c370996b3b82ca0d88dac4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-03drivers/intel/mipi_camera: Add reference counting for shared resourcesSugnan Prabhu S
This change updates the mipi_camera driver to handle shared power resource between multiple cameras. This is achieved by adding a guard variable and methods to manipulate the guard variable before calling the actual platform method which enables or disables the resource. PowerResource will call these guarded methods to enable or disable the resource. This protects the shared resource from being enabled or disabled multiple times while the other camera is using the resource. Example: Consider a platform where two cameras are sharing a GPIO resource 0xXX and both the cameras calls enable and disable guarded methods for this GPIO. Actual platform disable method for the GPIO is called only after the last camera using the GPIO calls DSBx method and RESx becomes 0. Scope (\_SB.PCI0) { Name (RESx, Zero) Method (ENBx, 0, Serialized) { If ((RESx == Zero)) { \_SB.PCI0.STXS (0xXX) } RESx++ } Method (DSBx, 0, Serialized) { If ((RESx > Zero)) { RESx-- } If ((RESx == Zero)) { \_SB.PCI0.CTXS (0xXX) } } } Change-Id: I1468459d5bbb2fb07bef4e0590c96dd4dbab0d9c Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-31drivers/ipmi/ocp: Add function to support OCP specific ipmi commandTim Chu
Add driver for OCP specific ipmi commands. With this driver, OCP specific ipmi command can be used after implementing functions here. TEST=Build with CB:42242 on Delta Lake, select Kconfig option: IPMI_OCP and add device in devicetree to open this function. Use ipmi-util in OpenBMC to dump raw data and check if this function work. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I2efa85978ec4ad3d75f2bd93b4139ef8059127ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/43996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28drivers/i2c/max98373: fix error message formattingCaveh Jalali
This adds a missing newline to a printk in the max98373 driver. BUG=none TEST=verified BIOS boot log is properly formatted on volteer. Change-Id: I1c989729bdc71736975901566023e0057a6d0556 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28drivers/wifi: Adapt generic wifi driver into a chip driverKarthikeyan Ramasubramanian
Re-organize the existing generic wifi driver into a generic wifi chip driver. This allows generic wifi chip information to be added to the devicetree. BUG=None TEST=./util/abuild/abuild Change-Id: I63f957a008ecf4a6a810c2a135ed62ea81a79fe0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43768 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28Revert "src: Remove unused include <cpu/x86/smm.h>"Patrick Rudolph
This reverts commit 6f739184dd153e0f7c3fa42990e008578b51b2c1. Fixes compiling the SMMSTORE driver. Change-Id: I3b4d4063ded50529bea48f8d865c1689fe9e26d1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/drivers/intel/soundwire/soundwire.h: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: Icf8b77713e7b5deb9def19c3e14e89a40ba46107 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26drivers/intel/dptf: Remove prompts from DPTF config optionsTim Wawrzynczak
The prompts for the DPTF Kconfig options were not necessary, they should be selected based on what DPTF implementation is being used, ASL files or generated at runtime. It's not really meant to be fiddled with at build-time. Also rewrite the help text for the _HID selection, to try and make it more clear when to use y or n. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6edcabd28426916d9586d501b95b510dfc163fc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43830 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/mrc_cache: Avoid unused variable assignmentPaul Menzel
Fix the scan-build warning below: CC romstage/drivers/mrc_cache/mrc_cache.o src/drivers/mrc_cache/mrc_cache.c:450:26: warning: Value stored to 'flash' during its initialization is never read const struct spi_flash *flash = boot_device_spi_flash(); ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. The function can return early before the value is read. Fix this, by getting rid of the variable, as the value is only read once. Change-Id: I3c94b123f4994eed9d7568b63971fd5b1d94bc09 Found-by: scan-build (clang-tools-9 1:9.0.1-12) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-26src: Update bare access to BOOL CONFIG_ vals to CONFIG()Martin Roth
BOOL type Kconfig values should be used through the CONFIG() macro. These instances were not, so update them. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Change BOOL CONFIG_ to CONFIG() in comments & stringsMartin Roth
The Kconfig lint tool checks for cases of the code using BOOL type Kconfig options directly instead of with CONFIG() and will print out warnings about it. It gets confused by these references in comments and strings. To fix it so that it can find the real issues, just update these as we would with real issues. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove whitespace between 'sizeof' and '('Elyes HAOUAS
Change-Id: Iaf22dc1986427e8aa4521b0e9b40fafa5a29dbbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26drivers/usb: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing pointers that might be "NULL" when calling acpigen_write_scope and acpigen_write_device. Add sanity check for both of scope and name to prevent NULL pointer dereference. Found-by: Coverity CID 1430454 TEST=Built and boot up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I8ece3831bbd2641ceafbd71b9dc3db7e04a8eae4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43449 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/intel/dptf: Add missing Scope operator for _FIFTim Wawrzynczak
Missed one other scope operator in the DPTF cleanup. This one is for the fan device, and without this fix, the kernel isn't able to properly control the fan (it gets confused about whether it's ACPI 4+ compatible or not). BUG=b:149722146 TEST=verify /sys/class/thermal/cooling_zone0/max_state returns > 1, and /sys/class/thermal/cooling_zone0/cur_state is writable, and writing the value of `max_state` causes the fan to spin faster. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7bd83967ace761ddd17eaeae9c25abb0b2cbe413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-26src: Remove unused 'include <cbmem.h>'Elyes HAOUAS
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove unused include <cpu/x86/smm.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/smm.h>' -- src/) <(git grep -l 'SMM_DEFAULT_BASE\|SMM_DEFAULT_SIZE\|SMM_BASE\|SMM_ENTRY_OFFSET\|SMM_SAVE_STATE_BEGIN\|APM_CNT\|APM_STS\|apm_control\|set_smm_gnvs_ptr\|set_acpi_mode_on_exit\|io_trap_handler\|southbridge_io_trap_handler\|mainboard_io_trap_handler\|southbridge_smi_set_eos\|smm_southbridge_clear_state\|global_smi_enable\|global_smi_enable_no_pwrbtn\|cpu_smi_handler\|northbridge_smi_handler\|southbridge_smi_handler\|mainboard_smi_gpi\|mainboard_smi_apmc\|mainboard_smi_sleep\|smramc_dev\|smramc_reg\|run_smm_relocate\|smm_is_really_enabled\|is_smm_enabled\|smram_open\|smram_close\|smram_lock\|smm_open\|smm_close\|smm_lock\|_binary_smm_start\|_binary_smm_end\|smm_runtime\|smm_module_params\|smm_handler_start\|smm_get_save_state\|smm_handler_t\|smm_loader_params\|smm_setup_relocation_handler\|smm_load_module\|backup_default_smm_area\|restore_default_smm_area\|smm_region\|SMM_SUBREGION_HANDLER\|SMM_SUBREGION_CACHE\|SMM_SUBREGION_CHIPSET\|SMM_SUBREGION_NUM\|smm_subregion\|smm_list_regions' -- src/)|grep '<' Change-Id: Id96ddad974a1460a6e6580cee1e45c863761af06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-20drivers/intel/gma/Kconfig: Avoid dependency hell when ignoring strapsAngel Pons
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move it out of the `if GFX_GMA` block to break this unwanted dependency. TEST=Build for Librem 13v4 with no graphics init successfully. Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-18drivers/intel/dptf: Add missing scope operator around TSR optionsTim Wawrzynczak
The previous DPTF patch train missed the proper scope operator around all of the TSR options. Without this, the optional GTSH and/or _STR Methods end up in the wrong scope. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>