summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2020-08-17drivers/intel/fsp2_0/hand_off_block: Remove dead decrementElyes HAOUAS
Value stored to 'size' is never read. Also drop unused parameter. Change-Id: If3e96ac90f06966ee408964e0748730bc237ec19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17drivers/usb: Replace return value -10 with variableJohn Zhao
Coverity detects that value assigned to variable "ret" is overwritten before it is used. Fix the issue by returning right value. Found-by: Coverity CID 1255942, 1241836 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I2e1fb5400ff64c6178bb30601896780f8d67b5c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44185 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13drivers/intel/fsp2_0: don't select FSP_USES_CB_STACK on FSP 2.0 platformFelix Held
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0 based, so it doesn't reuse coreboot's stack, but sets up its own stack. In contrast to all other FSP 2.0 based platforms, this stack isn't in the CAR region, since AMD Picasso doesn't support CAR and the DRAM is already available when the x86 cores are released from reset. Selecting FSP_USES_CB_STACK ended up doing the right thing, but is semantically wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso we take the corresponding code path if ENV_CACHE_AS_RAM is false which is only the case for non-CAR platforms. BUG=b:155501050 TEST=Timeless build results in an identical binary for amd/mandolin, asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases here. Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-08-13drivers/intel/fsp2_0: Fill EFI_CPU_PHYSICAL_LOCATION structure informationSubrata Banik
Latest EDK2 code inside "UefiCpuPkg\Library\RegisterCpuFeaturesLib\CpuFeaturesInitialize.c" is now looking for EFI_CPU_PHYSICAL_LOCATION structure variables hence coreboot need to fill required information (package, core and thread count). TEST=Able to see package, core and thread information as part of FSP debug log. Change-Id: Ieccf20a116d59aaafbbec3fe0adad9a48931cb59 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-08-06drivers/intel/fsp2_0: Do AP re-init after FSP-S if USE_INTEL_FSP_MP_INIT enableSubrata Banik
This patch ensures that coreboot is able to take control of APs back by doing a full AP re-initialization after FSP-S is done. TEST=Able to see all cores available after booting to OS using below command when coreboot is built with USE_INTEL_FSP_MP_INIT enable. > cat /proc/cpuinfo Without this CL : shows only 1 core (only BSP) With this CL : shows all possible cores available (BSP + APs) Change-Id: I247d8d1166c77bd01922323b6a0f14ec6640a666 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-05drivers/intel/mipi_camera: Fix SSDT generation for IPU devicesSugnan Prabhu S
Includes changes in mipi_camera driver to fix following issues related to SSDT generation for IPU devices. 1. acpigen_write_device was not getting called for IPU devices 2. acpigen_pop_len was called for a generic devices without calling acpigen_write_device Change-Id: I309edd065719cb8250f1241898bb5854004d2a9f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05drivers/genesyslogic/gl9763e: Add driver for Genesys Logic GL9763EBen Chuang
The device is a PCIe to eMMC bridge controller to be used in the Chromebook as the boot disk. The datasheet name is GL9763E and the revision is 02. The patch sets single request AXI, disables ASPM L0s and enables SSC. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-03drivers/ipmi/ocp: Add ipmi set processor informationTim Chu
Implement setting processor information to BMC based on document YosemiteV3_BMC_Feature_Spec_v1.7. TEST=Use get command in OpenBMC to check. Command and information are shown as below: root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 1 DC 11 00 47 65 6E 75 69 6E 65 20 49 6E 74 65 6C 28 52 29 20 43 50 55 20 30 30 30 30 25 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 2 DC 11 00 1A 34 00 DC 05 41 30 root@bmc-oob:~# Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I3d53ac241a11ca962572816283a0c653fcde9f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-03drivers/amd/i2s_machine_dev: return if scope is NULLMartin Roth
Avoid dereferencing a null pointer. Found-by: Coverity CID 1430549 BUG=None TEST=Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I53f6a38aac6e7f94c3c370996b3b82ca0d88dac4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-03drivers/intel/mipi_camera: Add reference counting for shared resourcesSugnan Prabhu S
This change updates the mipi_camera driver to handle shared power resource between multiple cameras. This is achieved by adding a guard variable and methods to manipulate the guard variable before calling the actual platform method which enables or disables the resource. PowerResource will call these guarded methods to enable or disable the resource. This protects the shared resource from being enabled or disabled multiple times while the other camera is using the resource. Example: Consider a platform where two cameras are sharing a GPIO resource 0xXX and both the cameras calls enable and disable guarded methods for this GPIO. Actual platform disable method for the GPIO is called only after the last camera using the GPIO calls DSBx method and RESx becomes 0. Scope (\_SB.PCI0) { Name (RESx, Zero) Method (ENBx, 0, Serialized) { If ((RESx == Zero)) { \_SB.PCI0.STXS (0xXX) } RESx++ } Method (DSBx, 0, Serialized) { If ((RESx > Zero)) { RESx-- } If ((RESx == Zero)) { \_SB.PCI0.CTXS (0xXX) } } } Change-Id: I1468459d5bbb2fb07bef4e0590c96dd4dbab0d9c Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-31drivers/ipmi/ocp: Add function to support OCP specific ipmi commandTim Chu
Add driver for OCP specific ipmi commands. With this driver, OCP specific ipmi command can be used after implementing functions here. TEST=Build with CB:42242 on Delta Lake, select Kconfig option: IPMI_OCP and add device in devicetree to open this function. Use ipmi-util in OpenBMC to dump raw data and check if this function work. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I2efa85978ec4ad3d75f2bd93b4139ef8059127ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/43996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28drivers/i2c/max98373: fix error message formattingCaveh Jalali
This adds a missing newline to a printk in the max98373 driver. BUG=none TEST=verified BIOS boot log is properly formatted on volteer. Change-Id: I1c989729bdc71736975901566023e0057a6d0556 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28drivers/wifi: Adapt generic wifi driver into a chip driverKarthikeyan Ramasubramanian
Re-organize the existing generic wifi driver into a generic wifi chip driver. This allows generic wifi chip information to be added to the devicetree. BUG=None TEST=./util/abuild/abuild Change-Id: I63f957a008ecf4a6a810c2a135ed62ea81a79fe0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43768 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28Revert "src: Remove unused include <cpu/x86/smm.h>"Patrick Rudolph
This reverts commit 6f739184dd153e0f7c3fa42990e008578b51b2c1. Fixes compiling the SMMSTORE driver. Change-Id: I3b4d4063ded50529bea48f8d865c1689fe9e26d1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/drivers/intel/soundwire/soundwire.h: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: Icf8b77713e7b5deb9def19c3e14e89a40ba46107 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26drivers/intel/dptf: Remove prompts from DPTF config optionsTim Wawrzynczak
The prompts for the DPTF Kconfig options were not necessary, they should be selected based on what DPTF implementation is being used, ASL files or generated at runtime. It's not really meant to be fiddled with at build-time. Also rewrite the help text for the _HID selection, to try and make it more clear when to use y or n. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6edcabd28426916d9586d501b95b510dfc163fc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43830 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/mrc_cache: Avoid unused variable assignmentPaul Menzel
Fix the scan-build warning below: CC romstage/drivers/mrc_cache/mrc_cache.o src/drivers/mrc_cache/mrc_cache.c:450:26: warning: Value stored to 'flash' during its initialization is never read const struct spi_flash *flash = boot_device_spi_flash(); ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. The function can return early before the value is read. Fix this, by getting rid of the variable, as the value is only read once. Change-Id: I3c94b123f4994eed9d7568b63971fd5b1d94bc09 Found-by: scan-build (clang-tools-9 1:9.0.1-12) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-26src: Update bare access to BOOL CONFIG_ vals to CONFIG()Martin Roth
BOOL type Kconfig values should be used through the CONFIG() macro. These instances were not, so update them. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Change BOOL CONFIG_ to CONFIG() in comments & stringsMartin Roth
The Kconfig lint tool checks for cases of the code using BOOL type Kconfig options directly instead of with CONFIG() and will print out warnings about it. It gets confused by these references in comments and strings. To fix it so that it can find the real issues, just update these as we would with real issues. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove whitespace between 'sizeof' and '('Elyes HAOUAS
Change-Id: Iaf22dc1986427e8aa4521b0e9b40fafa5a29dbbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26drivers/usb: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing pointers that might be "NULL" when calling acpigen_write_scope and acpigen_write_device. Add sanity check for both of scope and name to prevent NULL pointer dereference. Found-by: Coverity CID 1430454 TEST=Built and boot up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I8ece3831bbd2641ceafbd71b9dc3db7e04a8eae4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43449 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/intel/dptf: Add missing Scope operator for _FIFTim Wawrzynczak
Missed one other scope operator in the DPTF cleanup. This one is for the fan device, and without this fix, the kernel isn't able to properly control the fan (it gets confused about whether it's ACPI 4+ compatible or not). BUG=b:149722146 TEST=verify /sys/class/thermal/cooling_zone0/max_state returns > 1, and /sys/class/thermal/cooling_zone0/cur_state is writable, and writing the value of `max_state` causes the fan to spin faster. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7bd83967ace761ddd17eaeae9c25abb0b2cbe413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-26src: Remove unused 'include <cbmem.h>'Elyes HAOUAS
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove unused include <cpu/x86/smm.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/smm.h>' -- src/) <(git grep -l 'SMM_DEFAULT_BASE\|SMM_DEFAULT_SIZE\|SMM_BASE\|SMM_ENTRY_OFFSET\|SMM_SAVE_STATE_BEGIN\|APM_CNT\|APM_STS\|apm_control\|set_smm_gnvs_ptr\|set_acpi_mode_on_exit\|io_trap_handler\|southbridge_io_trap_handler\|mainboard_io_trap_handler\|southbridge_smi_set_eos\|smm_southbridge_clear_state\|global_smi_enable\|global_smi_enable_no_pwrbtn\|cpu_smi_handler\|northbridge_smi_handler\|southbridge_smi_handler\|mainboard_smi_gpi\|mainboard_smi_apmc\|mainboard_smi_sleep\|smramc_dev\|smramc_reg\|run_smm_relocate\|smm_is_really_enabled\|is_smm_enabled\|smram_open\|smram_close\|smram_lock\|smm_open\|smm_close\|smm_lock\|_binary_smm_start\|_binary_smm_end\|smm_runtime\|smm_module_params\|smm_handler_start\|smm_get_save_state\|smm_handler_t\|smm_loader_params\|smm_setup_relocation_handler\|smm_load_module\|backup_default_smm_area\|restore_default_smm_area\|smm_region\|SMM_SUBREGION_HANDLER\|SMM_SUBREGION_CACHE\|SMM_SUBREGION_CHIPSET\|SMM_SUBREGION_NUM\|smm_subregion\|smm_list_regions' -- src/)|grep '<' Change-Id: Id96ddad974a1460a6e6580cee1e45c863761af06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-20drivers/intel/gma/Kconfig: Avoid dependency hell when ignoring strapsAngel Pons
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move it out of the `if GFX_GMA` block to break this unwanted dependency. TEST=Build for Librem 13v4 with no graphics init successfully. Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-18drivers/intel/dptf: Add missing scope operator around TSR optionsTim Wawrzynczak
The previous DPTF patch train missed the proper scope operator around all of the TSR options. Without this, the optional GTSH and/or _STR Methods end up in the wrong scope. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18dptf: Fix scope of TCPU deviceTim Wawrzynczak
In the initial DPTF refactor, the scope of the TCPU device was incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the way that the acpi_inject_dsdt() callback currently works (it injects contents before the dsdt.aml file), the Scope where the TCPU device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing games with *when* things are defined in the DSDT, switch to defining all of the DPTF devices in the SSDT. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17drivers/amd/i2s_machine_dev: Add a driver for AMD I2S machine deviceFurquan Shaikh
This change adds a new driver for AMD I2S machine device. Currently, this device is added as part of `acp_fill_ssdt()` in Picasso, but with addition of this driver, this device can be added just like any other device in the devicetree. BUG=b:157708581 Change-Id: I49d1a867d7941397acca1054632b6ad855a021de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14src: Drop unused <cpu/x86/tsc.h> includeElyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/tsc.h>' -- src/) <(git grep -l 'TSC_SYNC\|tsc_struct\|rdtsc\|tsc_t\|multiply_to_tsc\|rdtscll\|tsc_to_uint64\|tsc_freq_mhz\|tsc_constant_rate' -- src/)|grep '<' Change-Id: Id090e232a96323adb8d9a24b81f7ae5669248f57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42393 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src/drivers/usb/gadget.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: I1ca111a30153526c3915bf393208fb2b4c569c01 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43347 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src/drivers/usb/ehci_debug.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. This is needed for 'u64'. Change-Id: Ie99c27bd6a7d982bba9a93342f3e3b83a1c09e8d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <types.h>'Elyes HAOUAS
Files found using: diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<' Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/volteer: Convert static ASL files to new DPTF implementationTim Wawrzynczak
This patch converts the current DPTF policies from static ASL files into the new SSDT-based DPTF implementation. All settings are intended to be copied exactly. Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12drivers/usb/pci_xhci: Don't return ACPI names for missing portsRaul E Rangel
We only want to return an ACPI name for a USB port if the controller physically has the port. This has the desired side effect of making the usb_acpi driver skip generating an ACPI node for a device which has no port. This prevents writing an invalid SSDT table which the OS then complains about. BUG=b:154756391, b:158096224 TEST=Boot picasso trembyle and verify HS05, HS06 and SS05 are no longer generated. Also checked the logs and saw the devices being ignored. \_SB.PCI0.LPCB.EC0.CREC.TUN0: Cros EC I2C Tunnel at GENERIC: 0.0 \_SB.PCI0.LPCB.EC0.CREC.MSTH: Cros EC I2C Tunnel at GENERIC: 1.0 \_SB.PCI0.LPCB.EC0.CREC.ECA0: Cros EC audio codec at GENERIC: 0.0 \_SB.PCI0.PBRA.XHC0.RHUB.HS01: Left Type-C Port at USB2 port 0 \_SB.PCI0.PBRA.XHC0.RHUB.HS02: Left Type-A Port at USB2 port 1 \_SB.PCI0.PBRA.XHC0.RHUB.HS03: Right Type-A Port at USB2 port 2 \_SB.PCI0.PBRA.XHC0.RHUB.HS04: Right Type-C Port at USB2 port 3 xhci_acpi_name: USB2 port 4 does not exist on xHC PCI: 03:00.3 xhci_acpi_name: USB2 port 5 does not exist on xHC PCI: 03:00.3 \_SB.PCI0.PBRA.XHC0.RHUB.SS01: Left Type-C Port at USB3 port 0 \_SB.PCI0.PBRA.XHC0.RHUB.SS02: Left Type-A Port at USB3 port 1 \_SB.PCI0.PBRA.XHC0.RHUB.SS03: Right Type-A Port at USB3 port 2 \_SB.PCI0.PBRA.XHC0.RHUB.SS04: Right Type-C Port at USB3 port 3 xhci_acpi_name: USB3 port 4 does not exist on xHC PCI: 03:00.3 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia645380bea74f39fd94e2f9cbca3fcd4d18a878e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43354 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12drivers/usb/pci_xhci: Switch to using xhci_for_each_supported_usb_capRaul E Rangel
This removes some boilerplate code. BUG=b:154756391 TEST=Dump ACPI table for trembyle and verify it didn't change. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idcda4356f4e6cb7f6066c67e8fabe0299a1a75b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43353 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-11drivers/usb/ehci_debug.c: Drop preprocessor usageAngel Pons
There's no need to use ugly preprocessor here when regular C conditional statements will work just fine. Change-Id: I5abd445a335b43fb95e4df087d44e82c3f44349b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-07-11arch/x86: Drop CBMEM_TOP_BACKUPKyösti Mälkki
Code has evolved such that there seems to be little use for global definition of cbmem_top_chipset(). Even for AMD we had three different implementations. Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-11drivers/i2c/w83793: Drop dead codeAngel Pons
Nothing selects this driver. Drop it before it grows moss. Change-Id: I4d0e678a8725c1fdf9263b9fae4e4fb6bb5ab4de Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43268 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10drivers/usb/pci_xhci: Add Picasso xHCI controllersRaul E Rangel
BUG=b:154756391 TEST=Dump ACPI table and see xHCI nodes being created. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1541dc8ebf314a204708a7767f30f4db72990907 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43331 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10drivers/usb/pci_xhci: Add a driver to generate xHCI ACPI nodesRaul E Rangel
We can use xhci_for_each_ext_cap to inspect the xHC so we generate the correct number of device nodes. Scope (\_SB.PCI0.PBRA) { Device (XHC1) { Name (_ADR, 0x0000000000000004) // _ADR: Address Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x1F, 0x03 }) Device (RHUB) { Name (_ADR, Zero) // _ADR: Address Device (HS01) { Name (_ADR, 0x01) // _ADR: Address } Device (HS02) { Name (_ADR, 0x02) // _ADR: Address } Device (SS01) { Name (_ADR, 0x03) // _ADR: Address } } Name (_S0W, Zero) // _S0W: S0 Device Wake State Name (_S3W, 0x04) // _S3W: S3 Device Wake State Name (_S4W, 0x04) // _S4W: S4 Device Wake State } } BUG=b:154756391 TEST=Boot trembyle and look at ACPI table. See all xHCI nodes. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I44ebaef342e45923bc181ceebef882358d33f0d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41900 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09drivers/i2c/adt7463: Drop dead codeAngel Pons
Nothing selects this driver. Drop it before it grows moss. Change-Id: I9311dd07b8259384badec65da649fa0cf2da1e01 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43267 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09drivers/generic/generic: Drop dead codeAngel Pons
Nothing selects this driver. Drop it before it grows moss. Change-Id: I7f06ea45f90d502053c52ea0b7cd7aa6d52295c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43266 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09drivers/usb/ehci_debug.c: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I27e4d66a1c8e2ed0eb5152f6bd56cc3fec2dea8e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-09drivers/dec/21143: Drop dead codeAngel Pons
Nothing is selecting this driver. Drop it before it grows moss. Change-Id: I9e2ba205154a9b37455c522721f5eb2ef9d76b40 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09drivers/ti/tps65090: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Iebd9080cd0e859dce5e6c5398429c38d1aa075dc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09drivers/intel/gma/i915_reg.h: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: Iff5007256fedebd98082a575773d7de181b321ab Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-09drivers/pc80/pc/i8259c: Drop dead codeAngel Pons
This code is not even being build-tested. Drop it before it grows moss. Change-Id: I5bafcda2f8958e1ea4467749b40802deebe1cd3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-07dptf: Add support for IDSPTim Wawrzynczak
\_SB.DPTF.IDSP adverties to the DPTF daemon which policies the implementation supports. Added a new acpigen function to figure out which policies are used, and fills out IDSP appropriately. Change-Id: Idf67a23bf38de4481c02f98ffb27afb8ca2d1b7b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Fan and TSR optionsTim Wawrzynczak
DPTF has several options on how to control the fan (fine-grained speed control, minimum speed change in percentage points, and whether or not the DPTF device should notify the Fan if it detects low speed). Individual TSRs can also set GTSH, which is the amount of hysteresis inherent in the measurement, either from circuitry (if analog), or in firmware (if digital). BUG=b:143539650 TEST=compiles Change-Id: I42d789d877da28c163e394d7de5fb1ff339264eb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Running Average Power LimitsTim Wawrzynczak
This change adds support for emitting the PPCC table, which describes the ranges available as knobs for DPTF to tune. It can support min/max power, min/max time window for averaging, and the minimum adjustment size (granularity or step size) of each power limit. The current implementation only supports PL1 and PL2. BUG=b:143539650 TEST=compiles Change-Id: I67e80d661ea5bb79980ef285eca40c9a4b0f1849 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Fan Performance StatesTim Wawrzynczak
This change adds support for generating the _FPS table for the DPTF Fan object. The table describes different levels of fan activity that may be applied to the system in order to actively cool it. The information includes fan speed at a (rough) percentage level, fan speed in RPM, potential noise level in centibels, and power in mA. BUG=b:143539650 TEST=compiles Change-Id: I5591eb527f496d0c4c613352d2a87625d47d9273 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Charger Performance StatesTim Wawrzynczak
This change generates the DPTF TCHG.PPSS table in the SSDT. This table describes different charging rates which are available to use. DPTF can pick different rates in order to passively cool (or not) the system. BUG=b:143539650 TEST=compiles Change-Id: I6df6bfbac628fa4e4d313e38b8e6c53fce70a7f2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Critical PoliciesTim Wawrzynczak
This patch adds support for DPTF Critical Policies, which are consist of Method definitions only. They are `_CRT` and `_HOT`, which are defined as temperature thresholds that, when exceeded, will execute a graceful suspend or a graceful shutdown, respectively. BUG=b:143539650 TEST=compiles Change-Id: I711ecdcf17ae8f6e653f33069201da4515ace85e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Passive PoliciesTim Wawrzynczak
This patch adds support for emitting the Thermal Relationship Table, as well as _PSV Methods, which together form the basis for DPTF Passive Policies. BUG=b:143539650 TEST=compiles Change-Id: I82e1c9022999b0a2a733aa6cd9c98a850e6f5408 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for generation of Active PoliciesTim Wawrzynczak
This change adds support for generating the different pieces of DPTF Active Policies. This includes the Active Relationship Table, in addition to _ACx methods. BUG=b:143539650 TEST=compiles Change-Id: Iea0ccbd96f88d0f3a8f2c77a7d0f3a284e5ee463 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07drivers/intel/dptf: Add current participant Devices to DSDTTim Wawrzynczak
In this DPTF implementation, the participant device objects are written into the DSDT with only minimal Names attached (_HID/_ADR, _STA, _UID, PTYP, and _STR). All other Methods & Names will be written into the SSDT. If a device is not used in any policy, then its _STA is set to return 0 ("off"). BUG=b:143539650 TEST=Compiles. Change-Id: Ief69a57adce9ee0b19056ce6a11ed8a5b51b3f87 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07drivers/intel/mipi_camera: Add camera power resource to SSDTSugnan Prabhu S
This change adds support function to parse entries in the devicetree to generate PowerResource entries for the MIPI camera. Change-Id: I31e198b50acf2c64035aff9cb054fbe3602dd83e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41624 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Add support to handle CIO2 deviceMatt Delco
This change updates mipi_camera driver to handle CIO2 device type. Change-Id: I521740524bc1c4da3d8593f011a033542e4a872c Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42470 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: SSDT changes to add PLDMatt Delco
This change updates mipi_camera driver to add PLD section to SSDT. Change-Id: If65b9cbabca95e9645d8e5023ce7fd78b0625d1e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42469 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: SSDT changes to add DSMMatt Delco
This change updates mipi_camera driver to add DSM section to SSDT. Change-Id: Ic60e972b6aebad171a7b77fe0d99781693adfb20 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42468 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Add support for camera sensor in SSDTMatt Delco
This change updates mipi_camera driver to handle camera sensor. Change-Id: I581c9bf9b87eac69e88ec11724c3b26ee5fa9431 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42467 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Handle NVM and VCM device typeMatt Delco
This change adds support in mipi_camera driver to handle NVM and VCM device types. Change-Id: I24cb7f010d89bc8d14e0b4c8fe693ba6e9c68941 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42466 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Handle acpi_name and common codeMatt Delco
This change updates the mipi_camera driver to handle acpi_name based on device_type, if acpi_name is not set in the devicetree and moves some of the common code to separate methods. Change-Id: I15979f345fb823df2560db269e902a1ea650b69e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41607 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06drivers/ipmi: Increase BMC waiting message level from DEBUG to INFOPaul Menzel
As the booting the system can be delayed for a noticeable amount of time, often 60 seconds is the default, this is not a debug message. Chose log level BIOS_INFO. Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-05drivers/pc80/tpm: Remove support code if TPM is disabledKyösti Mälkki
Change-Id: I7015d4bf6f536c5cea8e1174db81f09f756ae0e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
2020-07-05drivers/pc80/tpm/tis: Add x86_64 supportPatrick Rudolph
Fix integer with different size to pointer conversion on x86_64. Change-Id: Ic06a32d549b694310f4c724246f28fed15acf83f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42983 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-04drivers/intel/pmc_mux: Rename con driver to connTim Wawrzynczak
For historical reasons, Windows has issues with certain names being used for files and directories, 'con' or 'CON' being one of them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in order to work around this issue. TEST=built volteer (only user of this driver as of now) Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-04drivers/ocp/dmi: Add OCP_DMI driver for populating SMBIOS from IPMI FRU dataJohnny Lin
It implements the SMBIOS IPMI FRU mapping table defined in https://www.opencompute.org/documents/facebook-xeon-motherboard-v31 22.3 SMBIOS FRU mapping table. Mainboard needs to configure the correct values for FRU_DEVICE_ID and BMC_KCS_BASE. For type 11 string 1 to 6 are common and implemented in this driver, the rest are project dependent and can be added in the mainboard code. Tested on OCP Tioga Pass. Change-Id: I08c958dfad83216cd12545760a19d205efc2515b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40308 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-04lib/coreboot_table: Add Intel FSP version to coreboot tableJohnny Lin
Add a new LB_TAG_PLATFORM_BLOB_VERSION for FSP version, it would add Intel FSP version to coreboot table LB_TAG_PLATFORM_BLOB_VERSION when PLATFORM_USES_FSP2_0 is selected. Tested=On OCP Delta Lake, with an updated LinuxBoot payload cbmem utility can see "LB_TAG_PLATFORM_BLOB_VERSION": "2.1-0.0.1.120" Change-Id: I92a13ca91b9f66a7517cfd6784f3f692ff34e765 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-04drivers/pc80/tpm: Remove LPC_TPMKyösti Mälkki
Replace uses with MAINBOARD_HAS_LPC_TPM, if drivers/pc80/tpm is present in devicetree.cb it is necessary to always include the driver in the build. Change-Id: I9ab921ab70f7b527a52fbf5f775aa063d9a706ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-04drivers/ipmi: Add IPMI KCS support in romstageJohnny Lin
It's necessary to run IPMI commands in romstage for writing error SEL such as memory initialization error SEL, and also for other usages such as starting FRB2 timer, OEM commands, etc. Add CONFIG_BMC_KCS_BASE for BMC KCS port address that can be used across romstage and ramstage. Change-Id: Ie3198965670454b123e570f9056673fdf515f52b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40234 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-03drivers/intel/pmx_mux: Remove redundant declarationKyösti Mälkki
Change-Id: Ie64b267ac01afa9774105e1ab8a7c18021726ff3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41871 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-02acpi_device: Replace polarity with active_low in acpi_gpio for GpioIoFurquan Shaikh
As per ACPI spec, GpioIo does not have any polarity associated with it. Linux kernel uses `active_low` argument within GPIO _DSD property to allow BIOS to indicate if the corresponding GPIO should be treated as active low. Thus, if GPIO has active high polarity or if it does not have any polarity associated with it, then the `active_low` argument is supposed to be set to 0. Having a `polarity` field in acpi_gpio seems confusing because GPIOs might not always have polarity associated with them. Example, in case of DMIC-select GPIO where 0 means select DMIC0 and 1 means select DMIC1, there is no polarity associated with the GPIO. Thus, it would be clearer for mainboard to use macros without having to specify a particular polarity. In order to enable mainboards to provide GPIO information without polarity for GpioIo usage, this change also adds `ACPI_GPIO_OUTPUT` and `ACPI_GPIO_INPUT` macros. BUG=b:157603026 Change-Id: I39d2a6ac8f149a74afeb915812fece86c9b9ad93 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-02drivers/generic/gpio_regulator: Drop unused driver for gpio_regulatorFurquan Shaikh
Proposal for gpio_regulator usage in ACPI never got accepted upstream for Linux kernel. So, the gpio_regulator driver in coreboot remains unused. This change drops this unused driver. Change-Id: Ia1e0ae4f955b9ffc8346d957f755499419d8cbc7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30src/drivers/intel: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing pointers that might be "NULL" when calling acpigen_write_scope and acpigen_write_device. Add sanity check for both of scope and name to prevent NULL pointer dereference. Found-by: Coverity CID 1429979, 1429982 TEST=Built and boot up to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: If17d12861f562dc0d6c98a5c91a9d3c0360ca2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42835 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28drivers/ipmi: Read more FRU data fields for Product and Board InfoJohnny Lin
Tested on OCP Tioga Pass Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: Ib05fdb34b2b324b6eb766de15727668ce91d2844 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40522 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-25drivers/intel/fsp2_0: decouple FSP_PEIM_TO_PEIM_INTERFACE from FSP 2.1Jonathan Zhang
Not all FSPs based on FSP 2.1 supports the feature of external PPI interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE. Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is selected. Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake). Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-25drivers/ipmi: Add IPMI read FRU chassis info areaJohnny Lin
Implemented according to IPMI "Platform Management FRU Information Storage Definition" specification v1.0 for reading FRU data Chassis Info Area. Tested on OCP Tioga Pass. Change-Id: Ieb53c20f8eb4b7720bf1fe349e6aaebaa4c37247 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40306 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25drivers/ipmi: Add function read_data_string() to make code cleanerJohnny Lin
Tested on OCP Tioga Pass. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I1da8abaa682af802e5cda65e5021069daf4ee717 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-06-23src/*: Update makefiles to exclude x86 code from psp-verstageMartin Roth
The assumption up to this point was that if the system had an x86 processor, verstage would be running on the x86 processor. With running verstage on the PSP, that assumption no longer holds true, so exclude pieces of code that cause problems for verstage on the PSP. This change will add these files to verstage only if the verstage architecture is X86 - either 32 or 64 bit. BUG=b:158124527 TEST=Build and boot on Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I797b67394825172bd44ad1ee693a0c509289486b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22spi/winbond: Simplify status reg union typesDaniel Gröber
Having speparate types for the status register with three and four block protection bits respectively doesn't really make sense, it's the same size either way just a different representation, so one union type will do. This allows us to de-duplicate the status register read in winbond_get_write_protection as well as removing another layer of union in 'struct status_regs'. Change-Id: Ie99b98fb6762c8d84d685b110cfc2fd5458b702e Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42111 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22lockdown: Add Kconfigs for SPI media protection modeDaniel Gröber
SPI_WRITE_PROTECTION_REBOOT seems to be a Winbond thing, other vendors such as Macronix only support permanent protection but conditional on the WP# pin state. Change-Id: Iba7c1229c82c86e1303d74c7bc8f89662b5bb58c Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41747 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22drivers/intel/gma/intel_ddi.c: Clean upElyes HAOUAS
Remove unused includes. Change-Id: I91dd92b54822dd0d10051ccd600ce787860c8ff6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-21src: Substitute `__FUNCTION__` with `__func__`Angel Pons
The former is not standard C, and we primarily use the latter form. Change-Id: Ia7091b494ff72588fb6910710fd72165693c1ac5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-06-20ACPI: Drop some HAVE_ACPI_RESUME preprocessor useKyösti Mälkki
Change-Id: Idfb89ceabac6b6906e31a3dbe9096d48ba680599 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-18ACPI,drivers/: Do not guard <acpi/acpi.h>Kyösti Mälkki
Header was moved outside arch/. Change-Id: Id96c2bdcee49cddab6610c7e2cd6f07638279256 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-17treewide: Replace CONFIG(ARCH_xx) testsKyösti Mälkki
Once we support building stages for different architectures, such CONFIG(ARCH_xx) tests do not evaluate correctly anymore. Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17smmstore: Verify userspace-provided pointer to protect SMMPatrick Rudolph
Use the introduced functions and verify pointers in the SMMSTORE. Make sure to not overwrite or leak data from SMM and update the documentation as well. Change-Id: I70df08657c3fa0f98917742d8e1a6cb1077e3758 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41085 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-15Makefile.inc: Remove all-y with CONFIG_ARCH_xx guardsMartin Roth
The assumption up to this point was that if the system had an x86 processor, verstage would be running on the x86 processor. With running verstage on the PSP, that assumption no longer holds true, so exclude pieces of code that cause problems for verstage on the PSP. As a generalization, remove all-y for CONFIG_ARCH_xx guarded makefiles. BUG=b:158124527 TEST=Build and boot on Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia7dcfed699ee1c0cd5a5250431c5f05bf6d8b9c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-14drivers/intel/fsp2_0: Add FSP 2.2 specific supportSubrata Banik
• Based on FSP EAS v2.1 – Backward compatibility is retained. • Add multi-phase silicon initialization to increase the modularity of the FspSiliconInit() API. • Add FspMultiPhaseSiInit() API • FSP_INFO_HEADER changes o Added FspMultiPhaseSiInitEntryOffset • Add FSPS_ARCH_UPD o Added EnableMultiPhaseSiliconInit, bootloaders designed for FSP 2.0/2.1 can disable the FspMultiPhaseSiInit() API and continue to use FspSiliconInit() without change. FSP 2.2 Specification: https://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-support-package/intel-fsp-overview.html Change-Id: If7177a267f3a9b4cbb60a639f1c737b9a3341913 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41728 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14dptf: Introduce new paradigm for configuring DPTF parametersTim Wawrzynczak
Currently, configuring and reviewing DPTF parameters is difficult because DPTF tables and methods are defined in static ASL files, and are littered with #ifdefs which both define parameters and influence behavior (e.g., whether a method is included or not). This patch train is an effort to bring DPTF support to our ACPI DSDT/SSDT generation framework. This first patch is very minimal, and includes only creation of the DPTF device (in the DSDT). BUG=b:143539650 TEST=compiles (later tests get more comprehensive). Change-Id: I14df9f422c911677aeea25552ac1822a9462c58a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41883 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10drivers/intel/fsp2_0: Allow SoC/mainboard to update NvsBufferPtrFurquan Shaikh
This change moves the check for NvsBufferPtr in S3 resume case to happen just before FSP-M is called. This allows SoC/mainboard code to set NvsBufferPtr if it doesn't use the default MRC cache driver. BUG=b:155990176 Change-Id: Ia272573ad7117a0cb851f0bfe6a4c7989bc64cde Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-10binaryPI: Replace CONFIG(ARCH_xx) testKyösti Mälkki
Once we support building stages for different architectures, such CONFIG(ARCH_xx) tests do not evaluate correctly anymore. Not strictly required for binaryPI boards, but do this for consistency. Change-Id: Id0bbbfb6f695c4bb920bc57a1e9362a23884efb3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-08spi: Remove non_volatile flag from block protection interfaceDaniel Gröber
Only Winbond parts seem to support making status register writes volatile. So this flag should not be exposed in the generic interface. Change-Id: Idadb65ffaff0dd7809b18c53086a466122b37c12 Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41746 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07drivers/mrc_cache: generate debug messages for MRC cache updateJonathan Zhang
When MRC cached data update is performed, messages are written to event log, which is flash based. For system that does not have flash based event log, the messages are lost. Added corresponding BIOS_DEBUG messages. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I1ef4794151fea7213c8317ddc898b0e37da280b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41981 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06src: Use pci_dev_ops_pci where applicableAngel Pons
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>