coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2019-10-22	AUTHORS: Move src/drivers/[l-v] copyrights into AUTHORS file	Martin Roth
	As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Updated Authors file is in a separate commit. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia0a07df6ca1fdaa2837ce8839057057cbd44d157 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-04	acpi_pld: Make it easier to define the ACPI USB device groups	Duncan Laurie
	The Linux kernel can use the ACPI _PLD group information to determine peer ports. Currently to define the group information the devicetree must provide a complete _PLD structure. This change pulls the group information into a separate structure that can be defined in devicetree. This makes it easier to set for USB devices in devicetree that do not need a full custom PLD. This was tested on a sarien board with the USB devices defined by verifying that the USB 2/3 ports are correctly identified with their peer in sysfs. Change-Id: Ifd4cadf0f6c901eb3832ad4e1395904f99c2f5a0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-22	drivers/usb/acpi: add reset gpio to usb acpi driver	Nick Vaccaro
	Add ability to define a reset gpio in acpi for a USB device. BUG=b:119275094 Change-Id: Ife3ea43a1eadf2548aa52b8fbd792e691d7cc7f2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajat Jain <rajatja@google.com>
2018-05-18	drivers/usb/acpi: Add a driver for generating USB ACPI	Duncan Laurie
	Add a support for generating USB port descriptors for ACPI based on their definition by the board in devicetree.cb. This will generate a _UPC and _PLD for each port, using a generic _PLD by default. The _PLD can also be customized for more accurate descriptions if necessary. This sample devictree.cb shows a USB 2.0 type-A port behind a root hub connected to an xHCI controller: device pci 14.0 on chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" device usb 0.0 on chip drivers/usb/acpi register "desc" = ""USB 2.0 Type-A"" register "type" = "UPC_TYPE_A" device usb 2.0 on end end end end end It will generate the following ACPI code in the SSDT: Scope (\_SB.PCI0.XHCI.RHUB.HS01) { Name (_DDN, "USB 2.0 Type-A") Name (_UPC, Package (0x04) { 0xFF, 0x00, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "RECTANGLE", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) } Change-Id: I7024390e407fda4b195211bd4755bb5ca53b2b37 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26173 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>