| Age | Commit message (Collapse) | Author |
|---|
|
The warning -Wstack-usage= doesn't seem to exist on clang, so trying
to disable it makes the compiler unhappy about non-existent pragmas.
Catching this on gcc is good enough, so let's disable it for the clang
case
Change-Id: Ia3716a83ba41743ac1dbe73e70abd170de30d7ab
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Now that all platforms are updated to provide spi bus map, there is no
need to keep the spi_setup_slave as a weak symbol.
BUG=b:38430839
Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define a new spi_flash_ops structure, move all spi flash operations to
this structure and add a pointer to this structure in struct spi_flash.
BUG=b:38330715
Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it
so that drivers can use it outside spi_flash.c.
2. Make southbridge intel spi driver use spi_flash_generic_probe if
spi_is_multichip returns 0.
3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to
provide specialized probe functions. With this change, the specialized
spi flash probe functions are now associated with a particular spi
ctrlr structure and no longer disconnected from the spi controller.
BUG=b:38330715
Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Pointer to spi_slave structure can be passed in as const to spi flash
probe functions since the probe functions do not need to modify the
slave properties.
BUG=b:38330715
Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19707
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused function declaration spi_fram_probe_ramtron.
BUG=b:38330715
Change-Id: I05e6c5c2b97d6c8a726c0e443ad855f9bcb703f9
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19706
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of making all SPI drivers allocate space for a spi_flash
structure and fill it in, udpate the API to allow callers to pass in a
spi_flash structure that can be filled by the flash drivers as
required. This also cleans up the interface so that the callers can
maintain and free the space for spi_flash structure as required.
BUG=b:38330715
Change-Id: If6f1b403731466525c4690777d9b32ce778eb563
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new member page_size to spi_flash structure so that the various
spi flash drivers can store this info in spi_flash along with the
other sizes (sector size and total size) during flash probe. This
removes the need to have {driver}_spi_flash structure in every spi
flash driver.
This is part of patch series to clean up the SPI flash and SPI driver
interface.
BUG=b:38330715
Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of storing spi flash device structure in spi flash driver, use
boot_device_spi_flash callback to obtain pointer to boot device spi
flash structure.
BUG=b:38330715
Change-Id: Idd50b7644d1a4be8b62d38cc9239feae2215103c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows callers to retrieve handle to the boot device spi_flash structure.
BUG=b:38330715
Change-Id: I1c07327115e0449cbd84d163218da76a6fa2cea0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
spi_crop_chunk is a property of the SPI controller since it depends
upon the maximum transfer size that is supported by the
controller. Also, it is possible to implement this within spi-generic
layer by obtaining following parameters from the controller:
1. max_xfer_size: Maximum transfer size supported by the controller
(Size of 0 indicates invalid size, and unlimited transfer size is
indicated by UINT32_MAX.)
2. deduct_cmd_len: Whether cmd_len needs to be deducted from the
max_xfer_size to determine max data size that can be
transferred. (This is used by the amd boards.)
Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19386
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested-by: coreboot org <coreboot.org@gmail.com>
|
|
MAINBOARD_HAS_SPI_TPM_CR50 describes a capability of the board and SPI_TPM
is only on if we actually want to compile in the TPM code. For example,
in src/drivers/i2c/tpm/Kconfig MAINBOARD_HAS_I2C_TPM_CR50 also doesn't
depend on SPI_TPM.
This problem manifests itself as the following build issue when building
with MAINBOARD_HAS_I2C_TPM_CR50 but without an explict "select TPM2":
src/Kconfig:296:error: recursive dependency detected!
src/Kconfig:296: symbol MAINBOARD_HAS_TPM2 is selected by MAINBOARD_HAS_TPM_CR50
src/Kconfig:408: symbol MAINBOARD_HAS_TPM_CR50 depends on MAINBOARD_HAS_SPI_TPM_CR50
src/drivers/spi/tpm/Kconfig:15: symbol MAINBOARD_HAS_SPI_TPM_CR50 depends on SPI_TPM
src/drivers/spi/tpm/Kconfig:1: symbol SPI_TPM depends on TPM2
src/Kconfig:396: symbol TPM2 is selected by MAINBOARD_HAS_TPM2
MAINBOARD_HAS_SPI_TPM_CR50 shouldn't depend on SPI_TPM.
BRANCH=none
BUG=b:36786804
TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are
configured to use IRQ flow control when talking to the Cr50 TPM.
Change-Id: I0cb3f6d3aa4159bad563a6a4b006d7f4825e04b4
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Suggested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19411
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use spi_setup_slave to fill up the spi_slave structure with
pointer to spi_ctrlr structure which can then be used to perform all
spi operations.
Change-Id: I2804ed1e85402426a654352e1ceaf0993546cd8b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19385
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
1. Move common TIS macros to include/tpm.h.
2. Use common TIS macros while referring to status and access registers.
3. Add a new function claim_locality to properly check for required
access bits and claim locality 0.
BUG=b:36873582
Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19213
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
There is only one user for spi_get_config i.e. SPI ACPI. Also, the
values provided by spi_get_config are constant for now. Thus, get rid
of the spi_get_config call and fill in these constant values in SPI
ACPI code itself. If there is a need in the future to change these,
appropriate device-tree configs can be added.
BUG=b:36873582
Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to be able to use SPI TPM on x86, allow TPM_SPI to be used
with PC80_SYSTEM.
BUG=b:35583330
Change-Id: Ibe626a192d45cf2624368db42d369202a4003123
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19093
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Use proper CAR semantics for global/static variables.
2. Use spi_* functions directly instead of using a global structure to
store pointers to those functions.
BUG=b:36873582
Change-Id: I1fc52ab797ef0cbd3793a387d68198efc5dde58c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:35647967
TEST=boot from bob
Change-Id: Ib64107b17fb6e93dbe626ce92f3bc9da8b84784e
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/452284
Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19113
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:35775002
TEST=boot from bob
Change-Id: I6324f3c02da55a8527f085ba463cbb1f4fb5dc2e
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/452283
Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19112
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
These files are required to support recovery MRC cache hash
save/restore in romtage/ramstage.
BUG=b:35583330
Change-Id: Idd0a4ee1c5f8f861caf40d841053b83a9d7aaef8
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19092
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The spi tis_sendrecv() implementation was always returning success
for all transactions. Correct this by returning -1 on error when
tpm2_process_command() returns 0 since that's its current failure
return code.
BUG=b:36598499
Change-Id: I8bfb5a09198ae4c293330e770271773a185d5061
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19058
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The tpm_info object is a global, but its symbol does not need to
be exposed to the world as its only used within tpm.c.
BUG=b:36598499
Change-Id: Idded3dad8d0d1c3535bddfb359009210d3439703
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19057
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
In the case of start_transaction() failing the chip select is never
deasserted. Correct that by deasserting the chip select when
start_transaction() fails.
BUG=b:36598499
Change-Id: I2c5200085eb357259edab39c1a0fa7b1d81ba7b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19056
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Going forward it's important to note when a CR50 is expected
to be present in the system. Additionally, this Kconfig addition
provides symmetry with the equivalent i2c Kconfig option.
BUG=b:35775104
Change-Id: Ifbd42b8a22f407534b23459713558c77cde6935d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/18680
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Add support for more ACPI features in the generic SPI ACPI
driver so it can be flexible enough to support more devices,
or devices in different configurations.
- add a wake pin
- add support for using IRQ GPIO instead of PIRQ
- add power resource support with enable and reset gpios
BUG=chrome-os-partner:61233
TEST=ensure existing SSDT generation is unchanged,
and test that new features generate expected code
Change-Id: Ibe37cc87e488004baa2c08a369f73c86e6cd6dce
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18393
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Similar to I2C driver, add support for generating SPI device and
required properties in SSDT for ACPI.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles succesfully. Verified SPI device generated in SSDT on
poppy.
Change-Id: Ic4da79c823131d54d9eb3652b86f6e40fe643ab5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18342
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a new callback to spi_ctrlr structure - get_config - to obtain
configuration of SPI bus from the controller driver. Also, move common
config definitions from acpi_device.h to spi-generic.h
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I412c8c70167d18058a32041c2310bc1c884043ce
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18337
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Fix SPI flash ops regressions after commit:
c2973d1 spi: Get rid of SPI_ATOMIC_SEQUENCING
When spi_flash_cmd() is called with argument response==NULL,
only send out command without reading back the response.
Change-Id: I28a94f208b4a1983d45d69d46db41391e267891d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18082
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with
the ability to perform tx and rx of flash command and response at the
same time. Instead of introducing this notion at SPI flash driver layer,
clean up the interface to SPI used by flash.
Flash uses a command-response kind of communication. Thus, even though
SPI is duplex, flash command needs to be sent out on SPI bus and then
flash response should be received on the bus. Some specialized x86
flash controllers are capable of handling command and response in a
single transaction.
In order to support all the varied cases:
1. Add spi_xfer_vector that takes as input a vector of SPI operations
and calls back into SPI controller driver to process these operations.
2. In order to accomodate flash command-response model, use two vectors
while calling into spi_xfer_vector -- one with dout set to
non-NULL(command) and other with din set to non-NULL(response).
3. For specialized SPI flash controllers combine two successive vectors
if the transactions look like a command-response pair.
4. Provide helper functions for common cases like supporting only 2
vectors at a time, supporting n vectors at a time, default vector
operation to cycle through all SPI op vectors one by one.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17681
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There was an assumption that all SPI controllers could
consume a full page of data to write. However, that
assumption doesn't hold when spi_crop_chunk() indicates
sizes smaller than page size. If the requested offset isn't
page aligned from the start then writes will fail corrupting
data since a page boundary isn't honored.
The spansion driver needed quite a bit more work to honor
the spi_crop_chunk() result. It now mimics the other
driver's code. Also, needed to add spi_crop_chunk() to
marvell/bg4cd SoC to make google/cosmos build. SPI obviously
doesn't work on that platform, but it fixes the build error.
Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17910
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When trying to bring up a device with a malfunctioning TPM2 chip, the
driver currently gets stuck waiting for SPI flow control, causing
bricked devices.
This patch puts a 100 ms cap on the waiting time - this should be
enough even for a longest NVRAM save operation which could be under
way on the TPM device.
BRANCH=gru
BUG=chrome-os-partner:59807
TEST=with a matching change in depthcharge, now a gru with corrupted
SPI TPM comes up to the recovery screen (it was not showing signs
of life before this change).
Change-Id: I63ef5dde8dddd9afeae91e396c157a1a37d47c80
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/17898
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The MRC cache wants to be able to access the SPI flash boot device.
Allow an easy way to provide that so that there isn't duplicate
spi_flash objects representing the same device.
BUG=chrome-os-partner:56151
Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
1. Add new structure spi_ctrlr_buses that allows platform to define a
mapping from SPI controller to buses managed by the controller.
2. Provide weak implementations of spi_init and spi_setup_slave that
will be used by platforms using the new interface.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17561
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Commit 36b81af (spi: Pass pointer to spi_slave structure in
spi_setup_slave) changes the way spi_setup_slave handles the spi_slave
structure. Instead of expecting spi controller drivers to maintain
spi_slave structure in CAR_GLOBAL/data section, caller is expected to
manage the spi_slave structure. This requires that spi_flash drivers
maintain spi_slave structure and flash probe function needs to make a
copy of the passed in spi_slave structure.
This change fixes the regression on Lenovo X230 and other mainboards.
Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17728
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Iru Cai <mytbk920423@gmail.com>
|
|
1. Define a new structure spi_ctrlr that allows platforms to define
callbacks for spi operations (claim bus, release bus, transfer).
2. Add a new member (pointer to spi_ctrlr structure) in spi_slave
structure which will be initialized by call to spi_setup_slave.
3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c
which will make appropriate calls to ctrlr functions.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17684
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For spi_setup_slave, instead of making the platform driver return a
pointer to spi_slave structure, pass in a structure pointer that can be
filled in by the driver as required. This removes the need for platform
drivers to maintain a slave structure in data/CAR section.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17683
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Use size_t instead of unsigned int for bytes_out and bytes_in.
2. Use const attribute for spi_slave structure passed into xfer, claim
bus and release bus functions.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17682
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
flash_programmer_probe is a property of the spi flash driver and does
not belong in the spi_slave structure. Thus, make
spi_flash_programmer_probe a callback from the spi_flash_probe
function. Logic still remains the same as before (order matters):
1. Try spi_flash_programmer_probe without force option
2. Try generic flash probing
3. Try spi_flash_programmer_probe with force option
If none of the above steps work, fail probing. Flash controller is
expected to honor force option to decide whether to perform specialized
probing or to defer to generic probing.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
max_transfer_size is a property of the SPI controller and not of the spi
slave. Also, this is used only on one SoC currently. There is no need to
handle this at the spi flash layer.
This change moves the handling of max_transfer_size to SoC SPI driver
and gets rid of the max_transfer_size parameter.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17463
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SPI read speed directly impacts boot time and we do quite a lot of
reading.
Add a way to easily find out the speed of SPI flash reads within
coreboot.
Write speed is less important since there are very few writes and they
are small.
BUG=chrome-os-partner:56556
BRANCH=none
TEST=run on gru with SPI_SPEED_DEBUG set to 1. See the output messages:
read SPI 627d4 7d73: 18455 us, 1740 KB/s, 13.920 Mbps
Change-Id: Id3814bd2b7bd045cdfcc67eb1fabc861bf9ed3b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82cb93f6be47efce3b0a3843bab89d2381baef89
Original-Change-Id: Iec66f5b8e3ad62f14d836a538dc7801e4ca669e7
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376944
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16701
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SPI drivers for the various chipsets are not consistent in
their handling of when they are accessible. Coupled with the
unknown ordering of boot_device_init() being called this can
lead to unexpected behavior (probing failures or hangs). Instead
move the act of initializing the SPI flash boot device to when
the various infrastructure requires its usage when it calls
boot_device_rw(). Those platforms utilizing the RW boot device
would need to ensure their SPI drivers are functional and
ready when the call happens.
This further removes any other systems failing to boot as
reported in https://ticket.coreboot.org/issues/67.
BUG=chrome-os-partner:56151
Change-Id: Ib3bddf5e26bf5322f3dd20345eeef6bee40f0f66
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16300
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It's necessary to call spi_init() prior to calling spi_flash_probe()
such that the SPI drivers can do any work required prior to performing
SPI transactions. It could be argued that the drivers should handle
such situations, however the SPI API implementations seem to assume the
callers ensured spi_init() was called before any SPI transactions.
This fixes systems that failed to boot introduced by [1]. Issue tracked
in https://ticket.coreboot.org/issues/67.
[1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8
https://review.coreboot.org/16200
BUG=chrome-os-partner:56151
Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16297
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
On many x86 platforms the boot device is SPI which is memory
mapped. However, in order to write to the boot device one needs
to use the SPI api. Therefore, provide a common implementation
of boot_device_rw() which has no mmap() functionality. It only
reads, writes, and erases. This will be used in the existing
infrastructure but in a SPI agnostic way.
Two options are added:
1. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
2. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY
The former is auto-selected when COMMON_CBFS_SPI_WRAPPER is not
selected. The latter can be used to include the implementation
in the early stages such as bootblock, verstage, and romstage.
BUG=chrome-os-partner:56151
Change-Id: I2aa75f88409309e3f9b9bd79b52d27c0061139c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16200
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It shouldn't matter if COMMON_CBFS_SPI_WRAPPER is selected to
include the SPI flash support in all stages. Therefore, include
the SPI flash support files in all the stages. While there include
the same set of files for all stages. They were out of sync for
some reason.
BUG=chrome-os-partner:56151
Change-Id: I933335104203315cbbcf965185a7c176974e6356
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16198
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The spi_flash_probe() routine was setting a global varible
unconditonally regardless if the probe was for the boot device
or even if the boot devcie was flash. Moreover, there's no need
to report the SPI information if the boot device isn't even SPI.
Lastly, it's possible that the boot device is a SPI flash, but
the platform may never probe (selecting SPI_FLASH) for the
actual device connected. In that situation don't fill anything
in as no correct information is known.
BUG=chrome-os-partner:56151
Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16197
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide the RW boot device operations for the common cbfs
SPI wrapper. The RW region_device is the same as the read-only
one. As noted in the boot_device_rw() introduction patch the
mmap() support should not be used in conjuction with writing
as that results in incoherent operations. That's fine as the
current mmap() support is only used in the cbfs layer which
does not support writing, i.e. no cbfs regions would be
written to with any previous or outstanding mmap() calls.
BUG=chrome-os-partner:56151
Change-Id: I7cc7309a68ad23b30208ac961b1999a79626b307
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16199
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Indicate to the build system that a platform provides support
for a writable boot device. The following will provide the
necessary support:
COMMON_CBFS_SPI_WRAPPER users
soc/intel/apollolake
soc/intel/baytrail
soc/intel/braswell
soc/intel/broadwell
soc/intel/skylake
The SPI_FLASH option is auto-selected if the platform provides
write supoprt for the boot device and SPI flash is the boot
device.
Other platforms may provide similar support, but they do that
in a device specific manner such as selecting SPI_FLASH
explicitly. This provides clearance against build failures
where chipsets don't provide SPI API implementations even
though the platform may use a SPI flash to boot.
BUG=chrome-os-partner:56151
Change-Id: If78160f231c8312a313f9b9753607d044345d274
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The common boot device spi implementation is very much
specific to SPI flash. As such it should be moved into
that subdirectory. It's still a high-level option but
it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally
that allows the auto-selection of SPI_FLASH by a platform
selecting COMMON_CBFS_SPI_WRAPPER which allows for culling
of SPI_FLASH selections everywhere.
BUG=chrome-os-partner:56151
Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fixed "intierface" typo.
Change-Id: I65f0156ee059a8bed96c900ca3da3a06f45901e8
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-on: https://review.coreboot.org/16252
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Almost all boards and chipsets within the codebase assume or
use SPI flash as the boot device. Therefore, provide an option
for the boards/chipsets which don't currently support SPI flash
as the boot device. The default is to assume SPI flash is the
boot device unless otherwise instructed. This falls in line
with the current assumptions, but it also allows one to
differentiate a platform desiring SPI flash support while it not
being the actual boot device.
One thing to note is that while google/daisy does boot with SPI
flash part no SPI API interfaces were ever implemented. Therefore,
mark that board as not having a SPI boot device.
BUG=chrome-os-partner:56151
Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16191
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d.
This was submitted out of order.
Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16226
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
All flash drivers are automatically included in the build unless
COMMON_CBFS_SPI_WRAPPER was selected. However, there are cases
where these drivers are unnecessary such as certain intel platforms
where spi controller uses hardware sequencing without any ability
to manually probe the device. Therefore, provide an option that the
SoC can set the default value for. The COMMON_CBFS_SPI_WRAPPER
option is still honored by not including all drivers when that
is selected.
BUG=chrome-os-partner:56151
Change-Id: Ie9aa447da450f7c8717545f05cff800139a9e2dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16187
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16193
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Although we have already support for the flash chip N25Q128 there is a
similar type available which has the same geometry and opcodes but
unfortunately a slightly different device type ID. While the already
supported N25Q128 has the ID 0xbb18 this one has the ID 0xba18.
To make both types available in the flash support table, use N25Q128A as
the flash name. This name can be found in the datasheet which can be
found here:
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf
TEST=Booted and verified that MRC cache could be written
Change-Id: I02a47692efb23a9a06a289c367488abd256b8e0c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16061
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The TPM version string has become much longer recently, and the
TPM_FW_VER register available on VID 1ae0 devices supports reading in
arbitrary size quantities.
Let's read 50 bytes at a time to reduce the SPI register read wrapper
overhead, and increase the length limit to 300 bytes to accommodate
longer version strings.
TEST=verified on the Kevin device:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: RO_A: 0.0.1/84e2dde7 RO_B:* 0.0.2/13eda43f RW_A:* cr50_v1.1.5005-444ddb7 RW_B: cr50_v1.1.5005-5aac83c
cr50_v1.1.5005-444ddb7 private-cr51:v0.0.66-bd9a0fe tpm2:v0.0.259-8f3d735 cryptoc:v0.0.4-5319e83 2016-07-31 10:58:05 vbendeb@kvasha
Change-Id: Ifaf28c1a9a3990372a9cec108c098edbe50d3243
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/16000
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some devices allow to retrieve firmware version by reading the same 4
byte register repeatedly until the entire version string is read.
Let's print out TPM firmware version when available. Just in case
something goes wrong limit the version string length to 200 bytes.
CQ-DEPEND=CL:355701
BRANCH=none
BUG=chrome-os-partner:54723
TEST=built the new firmware and ran it on Gru, observed the following
in the coreboot console log:
Connected to device vid:did:rid of 1ae0:0028:00
Firmware version: cr50_v1.1.4792-7a44484
Original-Commit-Id: 1f54a30cebe808abf1b09478b47924bb722a0ca6
Original-Change-Id: Idb069dabb80d34a0efdf04c3c40a42ab0c8a3f94
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355704
Original-Reviewed-by: Scott Collyer <scollyer@chromium.org>
Squashed with:
tpm: use 4 byte quantities when retrieving firmware version
The CR50 device is capable of reporting its firmware version in 4 byte
quantities, but the recently introduced code retrieves the version one
byte at a time.
With this fix the version is retrieved in 4 byte chunks.
BRANCH=none
BUG=none
TEST=the version is still reported properly, as reported by the AP
firmware console log:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: cr50_v1.1.4804-c64cf24
localhost ~ #
Original-Commit-Id: 3111537e7b66d8507b6608ef665e4cde76403818
Original-Change-Id: I04116881a30001e35e989e51ec1567263f9149a6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356542
Original-Reviewed-by: Andrey Pronin <apronin@chromium.org>
Change-Id: Ia9f13a5bf1c34292b866f57c0d14470fe6ca9853
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15573
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The "PC Client Protection Profile for TPM 2.0" document defines SPI
bus addresses for different localities. That definition is not honored
in the cr50 implementation, this patch fixes it: locality zero
register file is based off 0xd40000.
BRANCH=none
BUG=chrome-os-partner:54720
TEST=with the fixed cr50 image and the rest of TPM2 initialization
patches applied factory initialization sequence on Gru succeeds.
Change-Id: I49b7ed55f0360448b9a6602ebd31a3a531608da3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 43344fff5d58ec235e50030413fc38c98dd0a9a1
Original-Change-Id: I2de6fa6c05d3eca989d6785228d5adde1f2a7ab7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355620
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://review.coreboot.org/15568
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
To fully define TPM attachment to a SPI interface both bus and CS
(chip select) settings are required. Add the missing CS configuration
option.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to compile in
and run TPM2 SPI driver.
Change-Id: If297df8e5b9526f156ed1414eb9db317d6af5b33
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353913
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15299
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This introduces a SPI TPM driver compliant with the TCG issued "TPM
Profile (PTP) Specification Revision 00.43" which can be found by
googling its title.
The driver implements both the hardware flow control protocol and the
TPM state machine.
The hardware flow control allows to map SPI based TPM devices to the
LPC address space on x86 platforms, on all other platforms it needs to
be implemented in the driver software.
The tis layer is somewhat superficial, it might have to be expanded
later.
A lot more implementation details can be found in the code comments.
Also, it is worth mentioning that this is not a complete version of
the driver: its robustness needs to be improved, delay loops need to
be bound, error conditions need to propagate up the call stack.
BRANCH=none
BUG=chrome-os-partner:52132, chrome-os-partner:50645, chrome-os-partner:54141
TEST=with the rest of the patches applied coreboot is able complete
Chrome OS factory initialization of the TPM2 device.
Change-Id: I967bc5c689f6e6f345755f08cb088ad37abd5d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5611c6f7d7fe6d37da668f337f0e70263913d63e
Original-Change-Id: I17d732e66bd231c2289ec289994dd819c6276855
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350124
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15298
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Tested-by: build bot (Jenkins)
|
|
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ifde289ec004f5d54d5df32011c87e49470e2bb5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 613b5ae45f7b8325863d8be492a451e6d076e293
Original-Change-Id: I93386e058a60b5c9b61d89607cf8c6e0de6a21ca
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334522
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SST25VF064C doesn't support the auto incrementing write which
all other supported SST chips support. Allow the chips to select
their write method.
Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14000
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I534f992ed479c7cdc049bd598259b1f1cf2953b9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10354
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The 'A' indicates the production process(64 nm). All other chips from
the same family leave this out.
TEST=Build and booted on Minnowboard Max
Change-Id: I21e6c01de5d547bbc2252e679a001948e7ab752c
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'.op_erase' was not specified for this chip. Set it to sub sector
erase(CMD_M25PXX_SSE). Adjust page/sector size for sub sector erase
to work.
TEST=Untested, due to lack of hardware.
Change-Id: Icc2748fbd3afeb56693e1c17d97eb490fba67064
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10077
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
N25Q064 is similar to N25Q128.
TEST=Build and booted twice on Minnowboard Max
Change-Id: Iec105f8b81f619846cf40b40042cc59150b81149
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10076
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
What is described by the comment has already been fixed in f0d038f4
(flash: use two bytes of device ID to identify stmicro chips).
This also means that STM_ID_N25Q128 doesn't have to be at the top of
stmicro_spi_flash_table anymore.
TEST=Untested, due to lack of hardware
Change-Id: I7a9e9a0cdfdb1cf34e914e186fc6957c1d9b5ca6
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The log message says 'page size' while actually the sector size is
printed. This is confusing since for stmicro page size != sector size.
Also add '0x' prefix to numbers to make it clear they are in hex.
TEST=Build and booted on Minnowboard Max
Change-Id: I795a4b7c1bc8de2538a87fd4ba56f5a78d9ca2ac
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
stmicro flash chips use 2 bytes as a device id: upper byte for memory
type and lower byte for capacity. with this change, we will use all 2
bytes to identify a chip.
BUG=none
BRANCH=broadcom-firmware
TEST=booted purin and verified n25q256a was identified.
Change-Id: I8f382eddc4fa70d3deceb4f9d2e82026a7025629
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f70a1d4b7e1142afec9ce097c4a21b6225f66e
Original-Change-Id: Id3378a77318fabb74ddb30f1a9549010636872ba
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199387
Original-Reviewed-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/251305
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Bootblock does not allow using malloc, use statically allocated chip
structures instead.
BRANCH=storm
BUG=chrome-os-partner:33489
TEST=both drivers compile when configured in, also booted whirlwind
with an STM compatible SPI NOR flash.
Change-Id: I154c33ce5fc278d594205d8b8e62a56edb4e177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eedbb959a595e0898e7a1dd551fc7c517a02f370
Original-Change-Id: I29b37107ac1d58a293f531f59ee76b3d8c4b3e7c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI
read and write transactions. Limiting transfer size in the wrapper
allows to provide the API user with unlimited transfer size
transactions.
The tranfer size limitation is added to the spi_slave structure, which
is set up by the controller driver. The value of zero in this field
means 'unlimited transfer size'. It will work with existion drivers,
as they all either keep structures in the bss segment, or initialize
them to all zeros.
This patch addresses the problem for reads only, as coreboot is not
expected to require to write long chunks into SPI devices.
BRANCH=none
BUG=chrome-os-partner:32441, chrome-os-partner:31438
TEST=set transfer size limit to artificially low value (4K) and
observed proper operation on both Pistachio and ipq8086: both
Storm and Urara booted through romstage and ramstage.
Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45
Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232239
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Vboot2 targets so far did not have COMMON_CBFS_SPI_WRAPPER
configuration option enabled, so the verstage is missing the relevant
files in some Makefiles. This patch fixes the problem.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied cosmos target builds fine
with COMMON_CBFS_SPI_WRAPPER enabled
Change-Id: I3ce78c8afc5f7d8ce822bbf8dd789c0c2ba4b99c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b72693c96f7d8ce94ce6fe12b316d5b88fded579
Original-Change-Id: Iab813b9f5b0156c45b007fe175500ef0de50e65c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8772
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
GD25LQ64C and GD25LB64C have the same ID and settings.
BUG=chrome-os-partner:25907
BRANCH=baytrail
TEST=Boot with GD25LQ64 and check MRC data save/restore works.
Change-Id: I8a4aa7cabd9a7657c2f0bae255a87341db3f1061
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20b5896adbbbdedcb1b7de435466dcc6bfa703cb
Original-Change-Id: I86d1e69552b6000faa9e0523356e27d7e2a6a6db
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193238
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8770
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This allows us to use the driver before ramstage.
BRANCH=none
BUG=none
TEST=built and booted on Pinky
Change-Id: I0700388b0e4e0562e3c0a52863c8357097bfd8d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd57587dab74de509d5c50cfc1ad337d765af6c8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I0ce901331e401274254b8889484ffb41359119fa
Original-Reviewed-on: https://chromium-review.googlesource.com/235864
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8774
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the driver is included in bootblock, malloc() is not available.
Come to think of it, it is perfectly fine to use a statically
allocated structure for the SPI device descriptor - coreboot is
unlikely to require concurrent support of multiple SPI devices of the
same kind.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=bootblock on the FPGA board recognizes the installed Winbond
device:
coreboot-4.0 bootblock Tue Nov 11 07:27:24 PST 2014 starting...
SF: Detected W25Q16 with page size 1000, total 200000
Change-Id: Iea1936a219d38848580a10f75eb8bbcab17e6507
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b4082442aa526d387a80cb5872d78670e6b468b
Original-Change-Id: Iaa69d610ef18e69b1ae5ade2d958f9fe1595a723
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228959
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8771
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
S25FL116K family uses the first 3 bytes in response to a legacy identification
command (9f) while previously supported models use the last 4 bytes. This change
defines identify functions to allow both types to be handled correctly.
BUG=none
BRANCH=tot
TEST=verified romstage is loaded on cosmos development board.
Change-Id: I1970a9af17e81299fada5029724d405de4022156
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65ff436db2355cb68a766a3dedbcd7e2f765e6db
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Icdd2645e356652672c4482e7b805da1bc0f21e71
Original-Reviewed-on: https://chromium-review.googlesource.com/234431
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm devices use more recent Spansion flash, add its description to
the table of supported devices.
BUG=chrome-os-partner:29871
TEST=the updated firmware boots all the way to depthcharge
Original-Change-Id: I81661c01ae679d49918e40d940b8d348f3081f9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205182
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit ea7bb1cf65b7130164b869fef09c55138100206b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e0136a5c575951b4e464aab0f380f19e886a84f
Reviewed-on: http://review.coreboot.org/8146
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: If883ff6eb14dd49a06f57a01ca61661854ded78d
Original-Reviewed-on: https://chromium-review.googlesource.com/198324
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 536c34c2d92178f4e62b8ca7cfffceaf80a305f6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I199451ed2b29c55bfb5e1487afa8cf3b9978e63e
Reviewed-on: http://review.coreboot.org/7935
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The Eon SPI25 code had a number of issues:
- fix page write calculation
- fix erase segment
- fix id check
- fix sector size
- make commands EN25 generic
This makes the code similar to other SPI25 devices used in coreboot.
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: I7667eab28b850790d92a591c869788d51c26a56c
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/198323
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 2ee0da695bf6a6c6aedc0dd2b3a3b7c9c3165bca)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8917e778cd62f3745189336d23c0c6118887d893
Reviewed-on: http://review.coreboot.org/7934
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Since the same driver is going to be used at all coreboot stages, it
can not use malloc() anymore. Replace it with static allocation of the
driver container structure.
The read interface is changed to spi_flash_cmd_read_slow(), because of
the problems with spi_flash_cmd_read_fast() implementation. In fact
there is no performance difference in the way the two interface
functions are implemented.
BUG=chrome-os-partner:27784
TEST=manual
. with all patches applied coreboot proceeds to attempting to load
the payload.
Original-Change-Id: I1c7beedce7747bc89ab865fd844b568ad50d2dae
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197931
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 57ee2fd875c689706c70338e073acefb806787e7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9d9e7e343148519580ed4986800dc6c6b9a5f5d2
Reviewed-on: http://review.coreboot.org/7933
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Coreboot has all necessary infrastructure to use the proper SPI flash
interface in bootblock for CBFS. This patch creates a common CBFS
wrapper which can be enabled on different platforms as required.
COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the
common CBFS interface and prevents default inclusion of all SPI chip
drivers, only explicitly configured ones will be included when the new
feature is enabled. Since the wrapper uses the same driver at all
stages, enabling the new feature will also make it necessary to
include the SPI chip drivers in bootblock and romstage images.
init_default_cbfs_media() can now be common for different platforms,
and as such is defined in the library.
BUG=none
TEST=manual
. with this change and the rest of the patches coreboot on AP148
comes up all the way to attempting to boot the payload (reading
earlier stages from the SPI flash along the way).
Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197800
Original-Tested-by: Vadim Bendebury <vbendeb@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41
Reviewed-on: http://review.coreboot.org/7932
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the device ID definitions and properties for the SPI chip used on
the AP148 board (Google Storm).
BUG=chrome-os-partner:27784
TEST=manual
. with the rest of the patches applied AP148 boots all the way to
trying to read the payload.
Original-Change-Id: I5a0e5c9d3cc9ea81bc5227c0fbc1d0a5fc7bec27
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197895
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a7c69981b18ac6b1158273596b94df0def65963d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I14e2f4f8f691a7db6ed596a3440914e08680867b
Reviewed-on: http://review.coreboot.org/7931
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This consolidates all calls to spi_claim_bus() and spi_release_bus()
to a single location where spi_xfer() is called. This avoids confusing
(and potentially redundant) calls that were being done throughout the
generic spi_flash.c functions and chip-specific functions.
I don't think the current approach could even work since many chip
drivers assert /CS once and then issue multiple commands such as page
program followed by reading the status register. I suspect the reason
we didn't notice it on x86 is because the ICH/PCH handled each
individual command correctly (spi_claim_bus() and spi_release_bus()
are noops) in spite of the broken code.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6
Original-Reviewed-on: https://chromium-review.googlesource.com/194510
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d
Reviewed-on: http://review.coreboot.org/7829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a wrapper function and a Kconfig variable to differentiate
between SPI controllers which use atomic cycle sequencing versus
those where the transaction sequence is controlled manually. Currently
this boils down to x86 vs. non-x86.
Yes, it's hideous. The current API only worked because, for better or
worse, x86 platforms have been homogeneous in this regard since they
started using SPI as an alternative to FWH for boot flash. Now that
we have non-x86 platforms which use general purpose SPI controllers,
we should overhaul the entire SPI infrastructure to be more adaptable.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958
Original-Reviewed-on: https://chromium-review.googlesource.com/195283
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4170c59d06206667755402712083452da9fcd941)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358
Reviewed-on: http://review.coreboot.org/7828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Similar to the W25Q64DW, the W25Q32DW has basically the same
attributes as the earlier W25Q32 parts but with a different
value in the MSB of the ID.
BUG=none
BRANCH=none
TEST=tested on nyan, now SPI flash commands actually work.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d
Original-Reviewed-on: https://chromium-review.googlesource.com/191205
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953
Reviewed-on: http://review.coreboot.org/7755
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
