| Age | Commit message (Collapse) | Author |
|---|
|
Fix SPI flash ops regressions after commit:
c2973d1 spi: Get rid of SPI_ATOMIC_SEQUENCING
When spi_flash_cmd() is called with argument response==NULL,
only send out command without reading back the response.
Change-Id: I28a94f208b4a1983d45d69d46db41391e267891d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18082
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with
the ability to perform tx and rx of flash command and response at the
same time. Instead of introducing this notion at SPI flash driver layer,
clean up the interface to SPI used by flash.
Flash uses a command-response kind of communication. Thus, even though
SPI is duplex, flash command needs to be sent out on SPI bus and then
flash response should be received on the bus. Some specialized x86
flash controllers are capable of handling command and response in a
single transaction.
In order to support all the varied cases:
1. Add spi_xfer_vector that takes as input a vector of SPI operations
and calls back into SPI controller driver to process these operations.
2. In order to accomodate flash command-response model, use two vectors
while calling into spi_xfer_vector -- one with dout set to
non-NULL(command) and other with din set to non-NULL(response).
3. For specialized SPI flash controllers combine two successive vectors
if the transactions look like a command-response pair.
4. Provide helper functions for common cases like supporting only 2
vectors at a time, supporting n vectors at a time, default vector
operation to cycle through all SPI op vectors one by one.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17681
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There was an assumption that all SPI controllers could
consume a full page of data to write. However, that
assumption doesn't hold when spi_crop_chunk() indicates
sizes smaller than page size. If the requested offset isn't
page aligned from the start then writes will fail corrupting
data since a page boundary isn't honored.
The spansion driver needed quite a bit more work to honor
the spi_crop_chunk() result. It now mimics the other
driver's code. Also, needed to add spi_crop_chunk() to
marvell/bg4cd SoC to make google/cosmos build. SPI obviously
doesn't work on that platform, but it fixes the build error.
Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17910
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When trying to bring up a device with a malfunctioning TPM2 chip, the
driver currently gets stuck waiting for SPI flow control, causing
bricked devices.
This patch puts a 100 ms cap on the waiting time - this should be
enough even for a longest NVRAM save operation which could be under
way on the TPM device.
BRANCH=gru
BUG=chrome-os-partner:59807
TEST=with a matching change in depthcharge, now a gru with corrupted
SPI TPM comes up to the recovery screen (it was not showing signs
of life before this change).
Change-Id: I63ef5dde8dddd9afeae91e396c157a1a37d47c80
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/17898
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The MRC cache wants to be able to access the SPI flash boot device.
Allow an easy way to provide that so that there isn't duplicate
spi_flash objects representing the same device.
BUG=chrome-os-partner:56151
Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17715
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
1. Add new structure spi_ctrlr_buses that allows platform to define a
mapping from SPI controller to buses managed by the controller.
2. Provide weak implementations of spi_init and spi_setup_slave that
will be used by platforms using the new interface.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17561
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Commit 36b81af (spi: Pass pointer to spi_slave structure in
spi_setup_slave) changes the way spi_setup_slave handles the spi_slave
structure. Instead of expecting spi controller drivers to maintain
spi_slave structure in CAR_GLOBAL/data section, caller is expected to
manage the spi_slave structure. This requires that spi_flash drivers
maintain spi_slave structure and flash probe function needs to make a
copy of the passed in spi_slave structure.
This change fixes the regression on Lenovo X230 and other mainboards.
Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17728
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Iru Cai <mytbk920423@gmail.com>
|
|
1. Define a new structure spi_ctrlr that allows platforms to define
callbacks for spi operations (claim bus, release bus, transfer).
2. Add a new member (pointer to spi_ctrlr structure) in spi_slave
structure which will be initialized by call to spi_setup_slave.
3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c
which will make appropriate calls to ctrlr functions.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17684
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For spi_setup_slave, instead of making the platform driver return a
pointer to spi_slave structure, pass in a structure pointer that can be
filled in by the driver as required. This removes the need for platform
drivers to maintain a slave structure in data/CAR section.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17683
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Use size_t instead of unsigned int for bytes_out and bytes_in.
2. Use const attribute for spi_slave structure passed into xfer, claim
bus and release bus functions.
BUG=chrome-os-partner:59832
BRANCH=None
TEST=Compiles successfully
Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17682
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
flash_programmer_probe is a property of the spi flash driver and does
not belong in the spi_slave structure. Thus, make
spi_flash_programmer_probe a callback from the spi_flash_probe
function. Logic still remains the same as before (order matters):
1. Try spi_flash_programmer_probe without force option
2. Try generic flash probing
3. Try spi_flash_programmer_probe with force option
If none of the above steps work, fail probing. Flash controller is
expected to honor force option to decide whether to perform specialized
probing or to defer to generic probing.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
max_transfer_size is a property of the SPI controller and not of the spi
slave. Also, this is used only on one SoC currently. There is no need to
handle this at the spi flash layer.
This change moves the handling of max_transfer_size to SoC SPI driver
and gets rid of the max_transfer_size parameter.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17463
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SPI read speed directly impacts boot time and we do quite a lot of
reading.
Add a way to easily find out the speed of SPI flash reads within
coreboot.
Write speed is less important since there are very few writes and they
are small.
BUG=chrome-os-partner:56556
BRANCH=none
TEST=run on gru with SPI_SPEED_DEBUG set to 1. See the output messages:
read SPI 627d4 7d73: 18455 us, 1740 KB/s, 13.920 Mbps
Change-Id: Id3814bd2b7bd045cdfcc67eb1fabc861bf9ed3b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82cb93f6be47efce3b0a3843bab89d2381baef89
Original-Change-Id: Iec66f5b8e3ad62f14d836a538dc7801e4ca669e7
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376944
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16701
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SPI drivers for the various chipsets are not consistent in
their handling of when they are accessible. Coupled with the
unknown ordering of boot_device_init() being called this can
lead to unexpected behavior (probing failures or hangs). Instead
move the act of initializing the SPI flash boot device to when
the various infrastructure requires its usage when it calls
boot_device_rw(). Those platforms utilizing the RW boot device
would need to ensure their SPI drivers are functional and
ready when the call happens.
This further removes any other systems failing to boot as
reported in https://ticket.coreboot.org/issues/67.
BUG=chrome-os-partner:56151
Change-Id: Ib3bddf5e26bf5322f3dd20345eeef6bee40f0f66
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16300
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It's necessary to call spi_init() prior to calling spi_flash_probe()
such that the SPI drivers can do any work required prior to performing
SPI transactions. It could be argued that the drivers should handle
such situations, however the SPI API implementations seem to assume the
callers ensured spi_init() was called before any SPI transactions.
This fixes systems that failed to boot introduced by [1]. Issue tracked
in https://ticket.coreboot.org/issues/67.
[1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8
https://review.coreboot.org/16200
BUG=chrome-os-partner:56151
Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16297
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
On many x86 platforms the boot device is SPI which is memory
mapped. However, in order to write to the boot device one needs
to use the SPI api. Therefore, provide a common implementation
of boot_device_rw() which has no mmap() functionality. It only
reads, writes, and erases. This will be used in the existing
infrastructure but in a SPI agnostic way.
Two options are added:
1. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
2. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY
The former is auto-selected when COMMON_CBFS_SPI_WRAPPER is not
selected. The latter can be used to include the implementation
in the early stages such as bootblock, verstage, and romstage.
BUG=chrome-os-partner:56151
Change-Id: I2aa75f88409309e3f9b9bd79b52d27c0061139c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16200
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It shouldn't matter if COMMON_CBFS_SPI_WRAPPER is selected to
include the SPI flash support in all stages. Therefore, include
the SPI flash support files in all the stages. While there include
the same set of files for all stages. They were out of sync for
some reason.
BUG=chrome-os-partner:56151
Change-Id: I933335104203315cbbcf965185a7c176974e6356
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16198
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The spi_flash_probe() routine was setting a global varible
unconditonally regardless if the probe was for the boot device
or even if the boot devcie was flash. Moreover, there's no need
to report the SPI information if the boot device isn't even SPI.
Lastly, it's possible that the boot device is a SPI flash, but
the platform may never probe (selecting SPI_FLASH) for the
actual device connected. In that situation don't fill anything
in as no correct information is known.
BUG=chrome-os-partner:56151
Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16197
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide the RW boot device operations for the common cbfs
SPI wrapper. The RW region_device is the same as the read-only
one. As noted in the boot_device_rw() introduction patch the
mmap() support should not be used in conjuction with writing
as that results in incoherent operations. That's fine as the
current mmap() support is only used in the cbfs layer which
does not support writing, i.e. no cbfs regions would be
written to with any previous or outstanding mmap() calls.
BUG=chrome-os-partner:56151
Change-Id: I7cc7309a68ad23b30208ac961b1999a79626b307
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16199
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Indicate to the build system that a platform provides support
for a writable boot device. The following will provide the
necessary support:
COMMON_CBFS_SPI_WRAPPER users
soc/intel/apollolake
soc/intel/baytrail
soc/intel/braswell
soc/intel/broadwell
soc/intel/skylake
The SPI_FLASH option is auto-selected if the platform provides
write supoprt for the boot device and SPI flash is the boot
device.
Other platforms may provide similar support, but they do that
in a device specific manner such as selecting SPI_FLASH
explicitly. This provides clearance against build failures
where chipsets don't provide SPI API implementations even
though the platform may use a SPI flash to boot.
BUG=chrome-os-partner:56151
Change-Id: If78160f231c8312a313f9b9753607d044345d274
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16211
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The common boot device spi implementation is very much
specific to SPI flash. As such it should be moved into
that subdirectory. It's still a high-level option but
it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally
that allows the auto-selection of SPI_FLASH by a platform
selecting COMMON_CBFS_SPI_WRAPPER which allows for culling
of SPI_FLASH selections everywhere.
BUG=chrome-os-partner:56151
Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fixed "intierface" typo.
Change-Id: I65f0156ee059a8bed96c900ca3da3a06f45901e8
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-on: https://review.coreboot.org/16252
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Almost all boards and chipsets within the codebase assume or
use SPI flash as the boot device. Therefore, provide an option
for the boards/chipsets which don't currently support SPI flash
as the boot device. The default is to assume SPI flash is the
boot device unless otherwise instructed. This falls in line
with the current assumptions, but it also allows one to
differentiate a platform desiring SPI flash support while it not
being the actual boot device.
One thing to note is that while google/daisy does boot with SPI
flash part no SPI API interfaces were ever implemented. Therefore,
mark that board as not having a SPI boot device.
BUG=chrome-os-partner:56151
Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16191
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d.
This was submitted out of order.
Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16226
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
All flash drivers are automatically included in the build unless
COMMON_CBFS_SPI_WRAPPER was selected. However, there are cases
where these drivers are unnecessary such as certain intel platforms
where spi controller uses hardware sequencing without any ability
to manually probe the device. Therefore, provide an option that the
SoC can set the default value for. The COMMON_CBFS_SPI_WRAPPER
option is still honored by not including all drivers when that
is selected.
BUG=chrome-os-partner:56151
Change-Id: Ie9aa447da450f7c8717545f05cff800139a9e2dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16187
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Make the indication of the boot device being memory mapped
separate from SPI. However, retain the same defaults that
previously existed.
BUG=chrome-os-partner:56151
Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16193
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Although we have already support for the flash chip N25Q128 there is a
similar type available which has the same geometry and opcodes but
unfortunately a slightly different device type ID. While the already
supported N25Q128 has the ID 0xbb18 this one has the ID 0xba18.
To make both types available in the flash support table, use N25Q128A as
the flash name. This name can be found in the datasheet which can be
found here:
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf
TEST=Booted and verified that MRC cache could be written
Change-Id: I02a47692efb23a9a06a289c367488abd256b8e0c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16061
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The TPM version string has become much longer recently, and the
TPM_FW_VER register available on VID 1ae0 devices supports reading in
arbitrary size quantities.
Let's read 50 bytes at a time to reduce the SPI register read wrapper
overhead, and increase the length limit to 300 bytes to accommodate
longer version strings.
TEST=verified on the Kevin device:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: RO_A: 0.0.1/84e2dde7 RO_B:* 0.0.2/13eda43f RW_A:* cr50_v1.1.5005-444ddb7 RW_B: cr50_v1.1.5005-5aac83c
cr50_v1.1.5005-444ddb7 private-cr51:v0.0.66-bd9a0fe tpm2:v0.0.259-8f3d735 cryptoc:v0.0.4-5319e83 2016-07-31 10:58:05 vbendeb@kvasha
Change-Id: Ifaf28c1a9a3990372a9cec108c098edbe50d3243
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/16000
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some devices allow to retrieve firmware version by reading the same 4
byte register repeatedly until the entire version string is read.
Let's print out TPM firmware version when available. Just in case
something goes wrong limit the version string length to 200 bytes.
CQ-DEPEND=CL:355701
BRANCH=none
BUG=chrome-os-partner:54723
TEST=built the new firmware and ran it on Gru, observed the following
in the coreboot console log:
Connected to device vid:did:rid of 1ae0:0028:00
Firmware version: cr50_v1.1.4792-7a44484
Original-Commit-Id: 1f54a30cebe808abf1b09478b47924bb722a0ca6
Original-Change-Id: Idb069dabb80d34a0efdf04c3c40a42ab0c8a3f94
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355704
Original-Reviewed-by: Scott Collyer <scollyer@chromium.org>
Squashed with:
tpm: use 4 byte quantities when retrieving firmware version
The CR50 device is capable of reporting its firmware version in 4 byte
quantities, but the recently introduced code retrieves the version one
byte at a time.
With this fix the version is retrieved in 4 byte chunks.
BRANCH=none
BUG=none
TEST=the version is still reported properly, as reported by the AP
firmware console log:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: cr50_v1.1.4804-c64cf24
localhost ~ #
Original-Commit-Id: 3111537e7b66d8507b6608ef665e4cde76403818
Original-Change-Id: I04116881a30001e35e989e51ec1567263f9149a6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356542
Original-Reviewed-by: Andrey Pronin <apronin@chromium.org>
Change-Id: Ia9f13a5bf1c34292b866f57c0d14470fe6ca9853
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15573
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The "PC Client Protection Profile for TPM 2.0" document defines SPI
bus addresses for different localities. That definition is not honored
in the cr50 implementation, this patch fixes it: locality zero
register file is based off 0xd40000.
BRANCH=none
BUG=chrome-os-partner:54720
TEST=with the fixed cr50 image and the rest of TPM2 initialization
patches applied factory initialization sequence on Gru succeeds.
Change-Id: I49b7ed55f0360448b9a6602ebd31a3a531608da3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 43344fff5d58ec235e50030413fc38c98dd0a9a1
Original-Change-Id: I2de6fa6c05d3eca989d6785228d5adde1f2a7ab7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355620
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://review.coreboot.org/15568
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
To fully define TPM attachment to a SPI interface both bus and CS
(chip select) settings are required. Add the missing CS configuration
option.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to compile in
and run TPM2 SPI driver.
Change-Id: If297df8e5b9526f156ed1414eb9db317d6af5b33
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353913
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15299
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This introduces a SPI TPM driver compliant with the TCG issued "TPM
Profile (PTP) Specification Revision 00.43" which can be found by
googling its title.
The driver implements both the hardware flow control protocol and the
TPM state machine.
The hardware flow control allows to map SPI based TPM devices to the
LPC address space on x86 platforms, on all other platforms it needs to
be implemented in the driver software.
The tis layer is somewhat superficial, it might have to be expanded
later.
A lot more implementation details can be found in the code comments.
Also, it is worth mentioning that this is not a complete version of
the driver: its robustness needs to be improved, delay loops need to
be bound, error conditions need to propagate up the call stack.
BRANCH=none
BUG=chrome-os-partner:52132, chrome-os-partner:50645, chrome-os-partner:54141
TEST=with the rest of the patches applied coreboot is able complete
Chrome OS factory initialization of the TPM2 device.
Change-Id: I967bc5c689f6e6f345755f08cb088ad37abd5d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5611c6f7d7fe6d37da668f337f0e70263913d63e
Original-Change-Id: I17d732e66bd231c2289ec289994dd819c6276855
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350124
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15298
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Tested-by: build bot (Jenkins)
|
|
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ifde289ec004f5d54d5df32011c87e49470e2bb5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 613b5ae45f7b8325863d8be492a451e6d076e293
Original-Change-Id: I93386e058a60b5c9b61d89607cf8c6e0de6a21ca
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334522
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SST25VF064C doesn't support the auto incrementing write which
all other supported SST chips support. Allow the chips to select
their write method.
Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14000
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I534f992ed479c7cdc049bd598259b1f1cf2953b9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10354
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The 'A' indicates the production process(64 nm). All other chips from
the same family leave this out.
TEST=Build and booted on Minnowboard Max
Change-Id: I21e6c01de5d547bbc2252e679a001948e7ab752c
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'.op_erase' was not specified for this chip. Set it to sub sector
erase(CMD_M25PXX_SSE). Adjust page/sector size for sub sector erase
to work.
TEST=Untested, due to lack of hardware.
Change-Id: Icc2748fbd3afeb56693e1c17d97eb490fba67064
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10077
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
N25Q064 is similar to N25Q128.
TEST=Build and booted twice on Minnowboard Max
Change-Id: Iec105f8b81f619846cf40b40042cc59150b81149
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10076
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
What is described by the comment has already been fixed in f0d038f4
(flash: use two bytes of device ID to identify stmicro chips).
This also means that STM_ID_N25Q128 doesn't have to be at the top of
stmicro_spi_flash_table anymore.
TEST=Untested, due to lack of hardware
Change-Id: I7a9e9a0cdfdb1cf34e914e186fc6957c1d9b5ca6
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The log message says 'page size' while actually the sector size is
printed. This is confusing since for stmicro page size != sector size.
Also add '0x' prefix to numbers to make it clear they are in hex.
TEST=Build and booted on Minnowboard Max
Change-Id: I795a4b7c1bc8de2538a87fd4ba56f5a78d9ca2ac
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
stmicro flash chips use 2 bytes as a device id: upper byte for memory
type and lower byte for capacity. with this change, we will use all 2
bytes to identify a chip.
BUG=none
BRANCH=broadcom-firmware
TEST=booted purin and verified n25q256a was identified.
Change-Id: I8f382eddc4fa70d3deceb4f9d2e82026a7025629
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f70a1d4b7e1142afec9ce097c4a21b6225f66e
Original-Change-Id: Id3378a77318fabb74ddb30f1a9549010636872ba
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199387
Original-Reviewed-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/251305
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Bootblock does not allow using malloc, use statically allocated chip
structures instead.
BRANCH=storm
BUG=chrome-os-partner:33489
TEST=both drivers compile when configured in, also booted whirlwind
with an STM compatible SPI NOR flash.
Change-Id: I154c33ce5fc278d594205d8b8e62a56edb4e177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eedbb959a595e0898e7a1dd551fc7c517a02f370
Original-Change-Id: I29b37107ac1d58a293f531f59ee76b3d8c4b3e7c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI
read and write transactions. Limiting transfer size in the wrapper
allows to provide the API user with unlimited transfer size
transactions.
The tranfer size limitation is added to the spi_slave structure, which
is set up by the controller driver. The value of zero in this field
means 'unlimited transfer size'. It will work with existion drivers,
as they all either keep structures in the bss segment, or initialize
them to all zeros.
This patch addresses the problem for reads only, as coreboot is not
expected to require to write long chunks into SPI devices.
BRANCH=none
BUG=chrome-os-partner:32441, chrome-os-partner:31438
TEST=set transfer size limit to artificially low value (4K) and
observed proper operation on both Pistachio and ipq8086: both
Storm and Urara booted through romstage and ramstage.
Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45
Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232239
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Vboot2 targets so far did not have COMMON_CBFS_SPI_WRAPPER
configuration option enabled, so the verstage is missing the relevant
files in some Makefiles. This patch fixes the problem.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied cosmos target builds fine
with COMMON_CBFS_SPI_WRAPPER enabled
Change-Id: I3ce78c8afc5f7d8ce822bbf8dd789c0c2ba4b99c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b72693c96f7d8ce94ce6fe12b316d5b88fded579
Original-Change-Id: Iab813b9f5b0156c45b007fe175500ef0de50e65c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8772
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
GD25LQ64C and GD25LB64C have the same ID and settings.
BUG=chrome-os-partner:25907
BRANCH=baytrail
TEST=Boot with GD25LQ64 and check MRC data save/restore works.
Change-Id: I8a4aa7cabd9a7657c2f0bae255a87341db3f1061
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20b5896adbbbdedcb1b7de435466dcc6bfa703cb
Original-Change-Id: I86d1e69552b6000faa9e0523356e27d7e2a6a6db
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193238
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8770
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This allows us to use the driver before ramstage.
BRANCH=none
BUG=none
TEST=built and booted on Pinky
Change-Id: I0700388b0e4e0562e3c0a52863c8357097bfd8d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd57587dab74de509d5c50cfc1ad337d765af6c8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I0ce901331e401274254b8889484ffb41359119fa
Original-Reviewed-on: https://chromium-review.googlesource.com/235864
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8774
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the driver is included in bootblock, malloc() is not available.
Come to think of it, it is perfectly fine to use a statically
allocated structure for the SPI device descriptor - coreboot is
unlikely to require concurrent support of multiple SPI devices of the
same kind.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=bootblock on the FPGA board recognizes the installed Winbond
device:
coreboot-4.0 bootblock Tue Nov 11 07:27:24 PST 2014 starting...
SF: Detected W25Q16 with page size 1000, total 200000
Change-Id: Iea1936a219d38848580a10f75eb8bbcab17e6507
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b4082442aa526d387a80cb5872d78670e6b468b
Original-Change-Id: Iaa69d610ef18e69b1ae5ade2d958f9fe1595a723
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228959
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8771
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
S25FL116K family uses the first 3 bytes in response to a legacy identification
command (9f) while previously supported models use the last 4 bytes. This change
defines identify functions to allow both types to be handled correctly.
BUG=none
BRANCH=tot
TEST=verified romstage is loaded on cosmos development board.
Change-Id: I1970a9af17e81299fada5029724d405de4022156
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65ff436db2355cb68a766a3dedbcd7e2f765e6db
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Icdd2645e356652672c4482e7b805da1bc0f21e71
Original-Reviewed-on: https://chromium-review.googlesource.com/234431
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm devices use more recent Spansion flash, add its description to
the table of supported devices.
BUG=chrome-os-partner:29871
TEST=the updated firmware boots all the way to depthcharge
Original-Change-Id: I81661c01ae679d49918e40d940b8d348f3081f9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205182
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit ea7bb1cf65b7130164b869fef09c55138100206b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e0136a5c575951b4e464aab0f380f19e886a84f
Reviewed-on: http://review.coreboot.org/8146
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: If883ff6eb14dd49a06f57a01ca61661854ded78d
Original-Reviewed-on: https://chromium-review.googlesource.com/198324
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 536c34c2d92178f4e62b8ca7cfffceaf80a305f6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I199451ed2b29c55bfb5e1487afa8cf3b9978e63e
Reviewed-on: http://review.coreboot.org/7935
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The Eon SPI25 code had a number of issues:
- fix page write calculation
- fix erase segment
- fix id check
- fix sector size
- make commands EN25 generic
This makes the code similar to other SPI25 devices used in coreboot.
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: I7667eab28b850790d92a591c869788d51c26a56c
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/198323
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 2ee0da695bf6a6c6aedc0dd2b3a3b7c9c3165bca)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8917e778cd62f3745189336d23c0c6118887d893
Reviewed-on: http://review.coreboot.org/7934
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Since the same driver is going to be used at all coreboot stages, it
can not use malloc() anymore. Replace it with static allocation of the
driver container structure.
The read interface is changed to spi_flash_cmd_read_slow(), because of
the problems with spi_flash_cmd_read_fast() implementation. In fact
there is no performance difference in the way the two interface
functions are implemented.
BUG=chrome-os-partner:27784
TEST=manual
. with all patches applied coreboot proceeds to attempting to load
the payload.
Original-Change-Id: I1c7beedce7747bc89ab865fd844b568ad50d2dae
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197931
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 57ee2fd875c689706c70338e073acefb806787e7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9d9e7e343148519580ed4986800dc6c6b9a5f5d2
Reviewed-on: http://review.coreboot.org/7933
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Coreboot has all necessary infrastructure to use the proper SPI flash
interface in bootblock for CBFS. This patch creates a common CBFS
wrapper which can be enabled on different platforms as required.
COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the
common CBFS interface and prevents default inclusion of all SPI chip
drivers, only explicitly configured ones will be included when the new
feature is enabled. Since the wrapper uses the same driver at all
stages, enabling the new feature will also make it necessary to
include the SPI chip drivers in bootblock and romstage images.
init_default_cbfs_media() can now be common for different platforms,
and as such is defined in the library.
BUG=none
TEST=manual
. with this change and the rest of the patches coreboot on AP148
comes up all the way to attempting to boot the payload (reading
earlier stages from the SPI flash along the way).
Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197800
Original-Tested-by: Vadim Bendebury <vbendeb@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41
Reviewed-on: http://review.coreboot.org/7932
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the device ID definitions and properties for the SPI chip used on
the AP148 board (Google Storm).
BUG=chrome-os-partner:27784
TEST=manual
. with the rest of the patches applied AP148 boots all the way to
trying to read the payload.
Original-Change-Id: I5a0e5c9d3cc9ea81bc5227c0fbc1d0a5fc7bec27
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197895
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a7c69981b18ac6b1158273596b94df0def65963d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I14e2f4f8f691a7db6ed596a3440914e08680867b
Reviewed-on: http://review.coreboot.org/7931
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This consolidates all calls to spi_claim_bus() and spi_release_bus()
to a single location where spi_xfer() is called. This avoids confusing
(and potentially redundant) calls that were being done throughout the
generic spi_flash.c functions and chip-specific functions.
I don't think the current approach could even work since many chip
drivers assert /CS once and then issue multiple commands such as page
program followed by reading the status register. I suspect the reason
we didn't notice it on x86 is because the ICH/PCH handled each
individual command correctly (spi_claim_bus() and spi_release_bus()
are noops) in spite of the broken code.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6
Original-Reviewed-on: https://chromium-review.googlesource.com/194510
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d
Reviewed-on: http://review.coreboot.org/7829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a wrapper function and a Kconfig variable to differentiate
between SPI controllers which use atomic cycle sequencing versus
those where the transaction sequence is controlled manually. Currently
this boils down to x86 vs. non-x86.
Yes, it's hideous. The current API only worked because, for better or
worse, x86 platforms have been homogeneous in this regard since they
started using SPI as an alternative to FWH for boot flash. Now that
we have non-x86 platforms which use general purpose SPI controllers,
we should overhaul the entire SPI infrastructure to be more adaptable.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958
Original-Reviewed-on: https://chromium-review.googlesource.com/195283
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4170c59d06206667755402712083452da9fcd941)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358
Reviewed-on: http://review.coreboot.org/7828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Similar to the W25Q64DW, the W25Q32DW has basically the same
attributes as the earlier W25Q32 parts but with a different
value in the MSB of the ID.
BUG=none
BRANCH=none
TEST=tested on nyan, now SPI flash commands actually work.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d
Original-Reviewed-on: https://chromium-review.googlesource.com/191205
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953
Reviewed-on: http://review.coreboot.org/7755
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The old print simply said "Got idcode". This makes it actually
display what it got.
BUG=none
BRANCH=none
TEST=tested on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f1c8fde6e4ac00b12e74f925b7bcff83d1f69f3
Original-Reviewed-on: https://chromium-review.googlesource.com/191204
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5f13789be77d038d3c1602037afe29a0351f72ee)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I65d0d51c17b3bda62351532aac1756b630433ea3
Reviewed-on: http://review.coreboot.org/7754
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Depending on the platform the underlying regions vboot requires
may not be accessible through a memory-mapped interface. Allow
for non-memory-mapped regions by providing a region request
abstraction. There is then only a few touch points in the code to
provide compile-time decision making no how to obtain a region.
For the vblocks a temporary area is allocated from cbmem. They
are then read from the SPI into the temporarily buffer.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built and booted a rambi with vboot verification.
Original-Change-Id: I828a7c36387a8eb573c5a0dd020fe9abad03d902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190924
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit aee0280bbfe110eae88aa297b433c1038c6fe8a3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia020d1eebad753da950342656cd11b84e9a85376
Reviewed-on: http://review.coreboot.org/7709
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Also update comment for the MX25L3236D part.
Change-Id: Ifaeeb71e7672a8db55bbb66e6ce7316e2893478d
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7631
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I60e578003b857f5dcabb2e9bc75aa46acddb62b8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7433
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I82482419afdf536a19b99c79131fa5844aaaec07
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7432
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Contributed by MXIC: http://www.coreboot.org/pipermail/coreboot/2014-October/078835.html
Change-Id: I07f872a5cbb2b0ea63794edb8fbca40d7856ce10
Author: Alex Lu <alexlu6@mxic.com.tw>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/7194
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The W25Q128FW spi part is programatically equivalent
to the other W25Q128 parts except it operates at 1.8V.
Just add a new entry with the appropriate ID.
Tested on a modified MinnowMax Board.
Change-Id: Id6a426418a7f785a9d959b02a9e3d2ffc421804f
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6971
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Continuing on from the rational given in:
a173a62 Remove guarding #includes by CONFIG_FOO combinations
Change-Id: I35c636ee7c0b106323b3e4b90629f7262750f8bd
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6114
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
There are two separate restrictions to take into account:
Page Program command must not cross address boundaries defined by the
flash part's page size.
Total number of bytes for any command sent to flash part is restricted
by the SPI controller capabilities.
Consider
CONTROLLER_PAGE_LIMIT=64, page_size=256, offset=62, len=4.
This write would be split at offset 64 for no reason.
Consider
CONTROLLER_PAGE_LIMIT=40, page_size=256, offset=254, len=4.
This write would not be split at page boundary as required.
We do not really hit the second case. Nevertheless, CONTROLLER_PAGE_LIMIT
is a misnomer for the maximum payload length supported by the SPI controller
and is removed in a followup.
Change-Id: I727f2e7de86a91b6a509460ff1f374acd006a0bc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6162
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I21e4e2384d9b8bbd34f652e99af11dee993fb41c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6173
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
At the end of some SPI operations the SPI device needs to be polled
to determine if it is done with the operation. For SPI data writes
the predicted time of that operation could be less than 10us.
The current per loop delay of 500us is adding too much delay.
This change replaces the delay(x) in the do-while loop with a
timer so that the actual timeout value won't be lengthened by the
delay of reading the SPI device.
Change-Id: Ia8b00879135f926c402bbd9d08953c77a2dcc84e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5973
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Trips up clang builds with a warn treated as error.
Change-Id: I9c0e2930ba8a60c7ad6063e9826b1b8638185505
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I11118a4fe1e05017349feae004f98a17bb02386b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5605
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Adds support for the following Adesto Technologies
SPI Flash parts.
AT25DF081
AT25DF321
AT25DF641
It has been tested on an Orion VPX7654 board populated
with an AT25DF321A part. The "08" and "64" densities have not
been tested.
These parts are the successors of the Atmel AT26DF line that
was spun out or purchased by Adesto.
In this patch, adesto.c is identical to winbond.c with part
entries for the Adesto parts. The datasheet for the AT25DF parts
includes a "100MHz" programming command in addition to the "85MHz"
command that is currently used but this patch does not add support
for that enhanced programming mode.
Change-Id: If82d075fd9000030480c412c645dcae2c8bb7439
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5225
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Id7e65065556ca7225969ca0afdb21eda24aeb967
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for the AMIC A25L032 flash chip.
Change-Id: Ie8d441a923c6fbd18c16440b4571321652d934d5
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5252
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The W25Q64DW spi part is programatically equivalent
to the other W25Q64 parts except it operates at 1.8V.
Just add a new entry with the appropriate ID.
BUG=chrome-os-partner:22292
BRANCH=None
TEST=SPI controller can program the part.
Change-Id: I65b0261223a9fefcb07477a43b6a3edb8228dd03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170011
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5077
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I7a2f5b9ae74458b5ed6271b1c27842c61546dcd2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4712
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
chip found in X230 if not using hardware sequencing.
Change-Id: I6ded10d35bfdbbe3d54c4170dd7846c7833f5ff7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4616
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Ported from spi/winbond.c.
Fixes this error:
ICH SPI: Too much to write.
Does your SPI chip driver use CONTROLLER_PAGE_LIMIT?
Change-Id: I50db8fd1104d3b7d319b278b14f97e3ff9cb6404
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3877
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
For whatever reason tabs got inserted in the license header text.
Remove one occurrence of that with the following command [1].
$ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,'
[1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt
Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2460
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
|
|
Since there are and will be other files in nb/sb folders, we change
the general spi.h to a file name which is not easy to be duplicated.
Change-Id: I6548a81206caa608369be044747bde31e2b08d1a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/2309
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
