Age | Commit message (Collapse) | Author |
|
The 'A' indicates the production process(64 nm). All other chips from
the same family leave this out.
TEST=Build and booted on Minnowboard Max
Change-Id: I21e6c01de5d547bbc2252e679a001948e7ab752c
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'.op_erase' was not specified for this chip. Set it to sub sector
erase(CMD_M25PXX_SSE). Adjust page/sector size for sub sector erase
to work.
TEST=Untested, due to lack of hardware.
Change-Id: Icc2748fbd3afeb56693e1c17d97eb490fba67064
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10077
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
N25Q064 is similar to N25Q128.
TEST=Build and booted twice on Minnowboard Max
Change-Id: Iec105f8b81f619846cf40b40042cc59150b81149
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10076
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
What is described by the comment has already been fixed in f0d038f4
(flash: use two bytes of device ID to identify stmicro chips).
This also means that STM_ID_N25Q128 doesn't have to be at the top of
stmicro_spi_flash_table anymore.
TEST=Untested, due to lack of hardware
Change-Id: I7a9e9a0cdfdb1cf34e914e186fc6957c1d9b5ca6
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The log message says 'page size' while actually the sector size is
printed. This is confusing since for stmicro page size != sector size.
Also add '0x' prefix to numbers to make it clear they are in hex.
TEST=Build and booted on Minnowboard Max
Change-Id: I795a4b7c1bc8de2538a87fd4ba56f5a78d9ca2ac
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
stmicro flash chips use 2 bytes as a device id: upper byte for memory
type and lower byte for capacity. with this change, we will use all 2
bytes to identify a chip.
BUG=none
BRANCH=broadcom-firmware
TEST=booted purin and verified n25q256a was identified.
Change-Id: I8f382eddc4fa70d3deceb4f9d2e82026a7025629
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f70a1d4b7e1142afec9ce097c4a21b6225f66e
Original-Change-Id: Id3378a77318fabb74ddb30f1a9549010636872ba
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199387
Original-Reviewed-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/251305
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Bootblock does not allow using malloc, use statically allocated chip
structures instead.
BRANCH=storm
BUG=chrome-os-partner:33489
TEST=both drivers compile when configured in, also booted whirlwind
with an STM compatible SPI NOR flash.
Change-Id: I154c33ce5fc278d594205d8b8e62a56edb4e177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eedbb959a595e0898e7a1dd551fc7c517a02f370
Original-Change-Id: I29b37107ac1d58a293f531f59ee76b3d8c4b3e7c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a function that allows reading of the status register
from the SPI chip. This can be used to determine whether
write protection is enabled on the chip.
BUG=chrome-os-partner:35209
BRANCH=haswell
TEST=build and boot on peppy
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240702
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c58f17689162b291a7cdb57649a237de21b73545)
Change-Id: Ib7fead2cc4ea4339ece322dd18403362c9c79c7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fbdf0d72892eef4a742a418a347ecf650c01ea5
Original-Change-Id: I2541b22c51e43f7b7542ee0f48618cf411976a98
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241128
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A payload may want to run erase operations on SPI NOR flash without
re-probing the device to get its properties. This patch passes up
three properties of flash to achieve that:
- The size of the flash device
- The sector size, i.e., the granularity of erase
- The command used for erase
The patch sends the parameters through coreboot and then libpayload.
The patch also includes a minor refactoring of the flash erase code.
Parameters are sent up for just one flash device. If multiple SPI
flash devices are probed, the second one will "win" and its
parameters will be sent up to the payload.
TEST=Observed parameters to be passed up to depthcharge through
libpayload and be used to correctly initialize flash and do an erase.
TEST=Winbond and Gigadevices spi flash drivers compile with the changes;
others don't, for seemingly unrelated reasons.
BRANCH=none
BUG=chromium:446377
Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126
Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72
Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239570
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9726
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI
read and write transactions. Limiting transfer size in the wrapper
allows to provide the API user with unlimited transfer size
transactions.
The tranfer size limitation is added to the spi_slave structure, which
is set up by the controller driver. The value of zero in this field
means 'unlimited transfer size'. It will work with existion drivers,
as they all either keep structures in the bss segment, or initialize
them to all zeros.
This patch addresses the problem for reads only, as coreboot is not
expected to require to write long chunks into SPI devices.
BRANCH=none
BUG=chrome-os-partner:32441, chrome-os-partner:31438
TEST=set transfer size limit to artificially low value (4K) and
observed proper operation on both Pistachio and ipq8086: both
Storm and Urara booted through romstage and ramstage.
Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45
Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232239
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9571
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Vboot2 targets so far did not have COMMON_CBFS_SPI_WRAPPER
configuration option enabled, so the verstage is missing the relevant
files in some Makefiles. This patch fixes the problem.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied cosmos target builds fine
with COMMON_CBFS_SPI_WRAPPER enabled
Change-Id: I3ce78c8afc5f7d8ce822bbf8dd789c0c2ba4b99c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b72693c96f7d8ce94ce6fe12b316d5b88fded579
Original-Change-Id: Iab813b9f5b0156c45b007fe175500ef0de50e65c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8772
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
GD25LQ64C and GD25LB64C have the same ID and settings.
BUG=chrome-os-partner:25907
BRANCH=baytrail
TEST=Boot with GD25LQ64 and check MRC data save/restore works.
Change-Id: I8a4aa7cabd9a7657c2f0bae255a87341db3f1061
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20b5896adbbbdedcb1b7de435466dcc6bfa703cb
Original-Change-Id: I86d1e69552b6000faa9e0523356e27d7e2a6a6db
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193238
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8770
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This allows us to use the driver before ramstage.
BRANCH=none
BUG=none
TEST=built and booted on Pinky
Change-Id: I0700388b0e4e0562e3c0a52863c8357097bfd8d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd57587dab74de509d5c50cfc1ad337d765af6c8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I0ce901331e401274254b8889484ffb41359119fa
Original-Reviewed-on: https://chromium-review.googlesource.com/235864
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8774
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the driver is included in bootblock, malloc() is not available.
Come to think of it, it is perfectly fine to use a statically
allocated structure for the SPI device descriptor - coreboot is
unlikely to require concurrent support of multiple SPI devices of the
same kind.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=bootblock on the FPGA board recognizes the installed Winbond
device:
coreboot-4.0 bootblock Tue Nov 11 07:27:24 PST 2014 starting...
SF: Detected W25Q16 with page size 1000, total 200000
Change-Id: Iea1936a219d38848580a10f75eb8bbcab17e6507
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b4082442aa526d387a80cb5872d78670e6b468b
Original-Change-Id: Iaa69d610ef18e69b1ae5ade2d958f9fe1595a723
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228959
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8771
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
S25FL116K family uses the first 3 bytes in response to a legacy identification
command (9f) while previously supported models use the last 4 bytes. This change
defines identify functions to allow both types to be handled correctly.
BUG=none
BRANCH=tot
TEST=verified romstage is loaded on cosmos development board.
Change-Id: I1970a9af17e81299fada5029724d405de4022156
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65ff436db2355cb68a766a3dedbcd7e2f765e6db
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Icdd2645e356652672c4482e7b805da1bc0f21e71
Original-Reviewed-on: https://chromium-review.googlesource.com/234431
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/8773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm devices use more recent Spansion flash, add its description to
the table of supported devices.
BUG=chrome-os-partner:29871
TEST=the updated firmware boots all the way to depthcharge
Original-Change-Id: I81661c01ae679d49918e40d940b8d348f3081f9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205182
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit ea7bb1cf65b7130164b869fef09c55138100206b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e0136a5c575951b4e464aab0f380f19e886a84f
Reviewed-on: http://review.coreboot.org/8146
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: If883ff6eb14dd49a06f57a01ca61661854ded78d
Original-Reviewed-on: https://chromium-review.googlesource.com/198324
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 536c34c2d92178f4e62b8ca7cfffceaf80a305f6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I199451ed2b29c55bfb5e1487afa8cf3b9978e63e
Reviewed-on: http://review.coreboot.org/7935
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The Eon SPI25 code had a number of issues:
- fix page write calculation
- fix erase segment
- fix id check
- fix sector size
- make commands EN25 generic
This makes the code similar to other SPI25 devices used in coreboot.
BUG=chrome-os-partner:25907
BRANCH=baytrail(rambi)
TEST=Read and write MRC and ELOG on Glimmer with Eon device.
Original-Change-Id: I7667eab28b850790d92a591c869788d51c26a56c
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/198323
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Marc Jones <marc.jones@se-eng.com>
Original-Tested-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 2ee0da695bf6a6c6aedc0dd2b3a3b7c9c3165bca)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8917e778cd62f3745189336d23c0c6118887d893
Reviewed-on: http://review.coreboot.org/7934
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Since the same driver is going to be used at all coreboot stages, it
can not use malloc() anymore. Replace it with static allocation of the
driver container structure.
The read interface is changed to spi_flash_cmd_read_slow(), because of
the problems with spi_flash_cmd_read_fast() implementation. In fact
there is no performance difference in the way the two interface
functions are implemented.
BUG=chrome-os-partner:27784
TEST=manual
. with all patches applied coreboot proceeds to attempting to load
the payload.
Original-Change-Id: I1c7beedce7747bc89ab865fd844b568ad50d2dae
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197931
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 57ee2fd875c689706c70338e073acefb806787e7)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9d9e7e343148519580ed4986800dc6c6b9a5f5d2
Reviewed-on: http://review.coreboot.org/7933
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Coreboot has all necessary infrastructure to use the proper SPI flash
interface in bootblock for CBFS. This patch creates a common CBFS
wrapper which can be enabled on different platforms as required.
COMMON_CBFS_SPI_WRAPPER, a new configuration option, enables the
common CBFS interface and prevents default inclusion of all SPI chip
drivers, only explicitly configured ones will be included when the new
feature is enabled. Since the wrapper uses the same driver at all
stages, enabling the new feature will also make it necessary to
include the SPI chip drivers in bootblock and romstage images.
init_default_cbfs_media() can now be common for different platforms,
and as such is defined in the library.
BUG=none
TEST=manual
. with this change and the rest of the patches coreboot on AP148
comes up all the way to attempting to boot the payload (reading
earlier stages from the SPI flash along the way).
Original-Change-Id: Ia887bb7f386a0e23a110e38001d86f9d43fadf2c
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197800
Original-Tested-by: Vadim Bendebury <vbendeb@google.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 60eb16ebe624f9420c6191afa6ba239b8e83a6e6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7b0bf3dda915c227659ab62743e405312dedaf41
Reviewed-on: http://review.coreboot.org/7932
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the device ID definitions and properties for the SPI chip used on
the AP148 board (Google Storm).
BUG=chrome-os-partner:27784
TEST=manual
. with the rest of the patches applied AP148 boots all the way to
trying to read the payload.
Original-Change-Id: I5a0e5c9d3cc9ea81bc5227c0fbc1d0a5fc7bec27
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197895
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a7c69981b18ac6b1158273596b94df0def65963d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I14e2f4f8f691a7db6ed596a3440914e08680867b
Reviewed-on: http://review.coreboot.org/7931
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This consolidates all calls to spi_claim_bus() and spi_release_bus()
to a single location where spi_xfer() is called. This avoids confusing
(and potentially redundant) calls that were being done throughout the
generic spi_flash.c functions and chip-specific functions.
I don't think the current approach could even work since many chip
drivers assert /CS once and then issue multiple commands such as page
program followed by reading the status register. I suspect the reason
we didn't notice it on x86 is because the ICH/PCH handled each
individual command correctly (spi_claim_bus() and spi_release_bus()
are noops) in spite of the broken code.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6
Original-Reviewed-on: https://chromium-review.googlesource.com/194510
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d
Reviewed-on: http://review.coreboot.org/7829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a wrapper function and a Kconfig variable to differentiate
between SPI controllers which use atomic cycle sequencing versus
those where the transaction sequence is controlled manually. Currently
this boils down to x86 vs. non-x86.
Yes, it's hideous. The current API only worked because, for better or
worse, x86 platforms have been homogeneous in this regard since they
started using SPI as an alternative to FWH for boot flash. Now that
we have non-x86 platforms which use general purpose SPI controllers,
we should overhaul the entire SPI infrastructure to be more adaptable.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958
Original-Reviewed-on: https://chromium-review.googlesource.com/195283
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4170c59d06206667755402712083452da9fcd941)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358
Reviewed-on: http://review.coreboot.org/7828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Similar to the W25Q64DW, the W25Q32DW has basically the same
attributes as the earlier W25Q32 parts but with a different
value in the MSB of the ID.
BUG=none
BRANCH=none
TEST=tested on nyan, now SPI flash commands actually work.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d
Original-Reviewed-on: https://chromium-review.googlesource.com/191205
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953
Reviewed-on: http://review.coreboot.org/7755
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The old print simply said "Got idcode". This makes it actually
display what it got.
BUG=none
BRANCH=none
TEST=tested on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f1c8fde6e4ac00b12e74f925b7bcff83d1f69f3
Original-Reviewed-on: https://chromium-review.googlesource.com/191204
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5f13789be77d038d3c1602037afe29a0351f72ee)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I65d0d51c17b3bda62351532aac1756b630433ea3
Reviewed-on: http://review.coreboot.org/7754
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Depending on the platform the underlying regions vboot requires
may not be accessible through a memory-mapped interface. Allow
for non-memory-mapped regions by providing a region request
abstraction. There is then only a few touch points in the code to
provide compile-time decision making no how to obtain a region.
For the vblocks a temporary area is allocated from cbmem. They
are then read from the SPI into the temporarily buffer.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built and booted a rambi with vboot verification.
Original-Change-Id: I828a7c36387a8eb573c5a0dd020fe9abad03d902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190924
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit aee0280bbfe110eae88aa297b433c1038c6fe8a3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia020d1eebad753da950342656cd11b84e9a85376
Reviewed-on: http://review.coreboot.org/7709
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Also update comment for the MX25L3236D part.
Change-Id: Ifaeeb71e7672a8db55bbb66e6ce7316e2893478d
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7631
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I60e578003b857f5dcabb2e9bc75aa46acddb62b8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7433
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I82482419afdf536a19b99c79131fa5844aaaec07
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7432
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Contributed by MXIC: http://www.coreboot.org/pipermail/coreboot/2014-October/078835.html
Change-Id: I07f872a5cbb2b0ea63794edb8fbca40d7856ce10
Author: Alex Lu <alexlu6@mxic.com.tw>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/7194
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The W25Q128FW spi part is programatically equivalent
to the other W25Q128 parts except it operates at 1.8V.
Just add a new entry with the appropriate ID.
Tested on a modified MinnowMax Board.
Change-Id: Id6a426418a7f785a9d959b02a9e3d2ffc421804f
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6971
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Continuing on from the rational given in:
a173a62 Remove guarding #includes by CONFIG_FOO combinations
Change-Id: I35c636ee7c0b106323b3e4b90629f7262750f8bd
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6114
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
There are two separate restrictions to take into account:
Page Program command must not cross address boundaries defined by the
flash part's page size.
Total number of bytes for any command sent to flash part is restricted
by the SPI controller capabilities.
Consider
CONTROLLER_PAGE_LIMIT=64, page_size=256, offset=62, len=4.
This write would be split at offset 64 for no reason.
Consider
CONTROLLER_PAGE_LIMIT=40, page_size=256, offset=254, len=4.
This write would not be split at page boundary as required.
We do not really hit the second case. Nevertheless, CONTROLLER_PAGE_LIMIT
is a misnomer for the maximum payload length supported by the SPI controller
and is removed in a followup.
Change-Id: I727f2e7de86a91b6a509460ff1f374acd006a0bc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6162
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I21e4e2384d9b8bbd34f652e99af11dee993fb41c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6173
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
At the end of some SPI operations the SPI device needs to be polled
to determine if it is done with the operation. For SPI data writes
the predicted time of that operation could be less than 10us.
The current per loop delay of 500us is adding too much delay.
This change replaces the delay(x) in the do-while loop with a
timer so that the actual timeout value won't be lengthened by the
delay of reading the SPI device.
Change-Id: Ia8b00879135f926c402bbd9d08953c77a2dcc84e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/5973
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Trips up clang builds with a warn treated as error.
Change-Id: I9c0e2930ba8a60c7ad6063e9826b1b8638185505
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I11118a4fe1e05017349feae004f98a17bb02386b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5605
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Adds support for the following Adesto Technologies
SPI Flash parts.
AT25DF081
AT25DF321
AT25DF641
It has been tested on an Orion VPX7654 board populated
with an AT25DF321A part. The "08" and "64" densities have not
been tested.
These parts are the successors of the Atmel AT26DF line that
was spun out or purchased by Adesto.
In this patch, adesto.c is identical to winbond.c with part
entries for the Adesto parts. The datasheet for the AT25DF parts
includes a "100MHz" programming command in addition to the "85MHz"
command that is currently used but this patch does not add support
for that enhanced programming mode.
Change-Id: If82d075fd9000030480c412c645dcae2c8bb7439
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5225
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Id7e65065556ca7225969ca0afdb21eda24aeb967
Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com>
Reviewed-on: http://review.coreboot.org/5260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for the AMIC A25L032 flash chip.
Change-Id: Ie8d441a923c6fbd18c16440b4571321652d934d5
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5252
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The W25Q64DW spi part is programatically equivalent
to the other W25Q64 parts except it operates at 1.8V.
Just add a new entry with the appropriate ID.
BUG=chrome-os-partner:22292
BRANCH=None
TEST=SPI controller can program the part.
Change-Id: I65b0261223a9fefcb07477a43b6a3edb8228dd03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170011
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5077
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I7a2f5b9ae74458b5ed6271b1c27842c61546dcd2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4712
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
chip found in X230 if not using hardware sequencing.
Change-Id: I6ded10d35bfdbbe3d54c4170dd7846c7833f5ff7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4616
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Ported from spi/winbond.c.
Fixes this error:
ICH SPI: Too much to write.
Does your SPI chip driver use CONTROLLER_PAGE_LIMIT?
Change-Id: I50db8fd1104d3b7d319b278b14f97e3ff9cb6404
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3877
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
For whatever reason tabs got inserted in the license header text.
Remove one occurrence of that with the following command [1].
$ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,'
[1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt
Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2460
Tested-by: build bot (Jenkins)
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
|
|
Since there are and will be other files in nb/sb folders, we change
the general spi.h to a file name which is not easy to be duplicated.
Change-Id: I6548a81206caa608369be044747bde31e2b08d1a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/2309
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The SB800 and Hudson now support adding the IMC ROM which runs from the same
chip as coreboot. When the IMC is running, write or erase commands sent to
the spi bus will fail, and the IMC will die. To fix this, we send a request
to the IMC to stop fetching from the SPI rom while we write to it. This
process (in one form or another) is required for writes to the SPI bus while
the IMC is running.
Because the IMC can take up to 500ms to respond every time we claim the
bus, this patch tries to keep the number of times we need to do that to a
minimum. We only need to claim the bus on writes, and using a counter for
the semaphore allows us to call in once to claim the bus at the beginning
of a number of transactions and it will stay claimed until we release it
at the end of the transactions.
Claim() - takes up to 500ms hit
claim() - no delay
erase()
release()
claim() - no delay
write()
release()
Release()
Change-Id: I4e003c5122a2ed47abce57ab8b92dee6aa4713ed
Signed-off-by: Martin Roth <martin@se-eng.com>
Reviewed-on: http://review.coreboot.org/1976
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Fix debug printks which were not using CONFIG_DEBUG_SPI_FLASH,
which would cause long delays durring boot when SPI devices
were written.
Change-Id: I99fc3d5f847fdf4bb98e2a0342ea418ab7d5fc54
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/1965
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Tested on Thatcher.
Change-Id: I648171ba0d03be1e984c182f6d0f082241e3f51c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1971
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
For SST chips, the Write-Status-Register instruction must be
executed immediately after the execution of the
Enable-Write-Status-Register instruction, instead of Write-Enable.
Change-Id: I4b3473cd671829def3bd1641ececcf8d9dad4a56
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1919
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
- Fix handling of 5-byte Fast Read command in the ICH SPI
driver. This fix is ported from the U-boot driver.
- Allow CONFIG_SPI_FLASH_NO_FAST_READ to be overridden by
defining a name for the bool in Kconfig and removing the
forced select in southbridge config
- Fix use of CONFIG_SPI_FLASH_NO_FAST_READ in SPI drivers
to use #if instead of #ifdef
- Relocate flash functions in SMM so they are usable.
This really only needs to happen for read function pointer
since it uses a global function rather than a static one from
the chip, but it is good to ensure the rest are set up
correctly as well.
Change-Id: Ic1bb0764cb111f96dd8a389d83b39fe8f5e72fbd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/1775
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add support for GigaDevice SPI ROMS.
The GD25Q64B device has been tested, the other rom devices added to the
file have not.
Change-Id: If35676ca6b90329f15667ebb32efa0d1a159ae91
Signed-off-by: Martin Roth <martin@se-eng.com>
Reviewed-on: http://review.coreboot.org/1747
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
- add Kconfig option for CONFIG_SPI_FLASH_SMM
- compile subsystem and chip drivers for smm if enabled
- change mdelay(1) to udelay(500) since mdelay is not defined
in SMM and a 1ms delay is worth avoiding
- make flash chip structure non-const so the probe function
pointers can be relocated for use in TSEG
- Make SMM PCI access possible in southbridge SPI code
Change-Id: Icfcbbe8e4e56658769d46af0b5bf6c79a6432641
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/1313
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
We don't ever free memory in coreboot, hence drop spi_flash_free() and
spi_free_slave()
Change-Id: I0ca3f78574ceb4516e7d33c06ab1a58abfb3b0ec
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1273
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Right now coreboot compilation fails when SPI flash debugging is
enabled. Fix it by using the right set of memory functions.
Change-Id: I5e372c4a5df53b4d46aaed9e251e5205ff68cb5b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Only print PP: lines if CONFIG_DEBUG_SPI_FLASH is enabled.
Change-Id: If25e916ecb585f37c90d42980e933a6cd1a3d956
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1045
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
- use %zu instead of %zd for size_t (%zd is for ssize_t)
- use %x instead of %lx for u32
- break some long lines to avoid commit hook trouble
Change-Id: Idfad716523dbcd2a595d26317240e972b5253e8b
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1041
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
lint tests for labels to start at BOL, no spaces before them.
Change-Id: Icf6ce533f26998a81b4be46d17e2d0b6b868904d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1029
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This driver is taken from u-boot and adapted to match
coreboot. It still contains some hacks and is ICH specific
at places.
Change-Id: I97dd8096f7db3b62f8f4f4e4d08bdee10d88f689
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/997
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|