summaryrefslogtreecommitdiff
path: root/src/drivers/siemens
AgeCommit message (Collapse)Author
2017-11-03siemens/nc_fpga: Set FW_DONE bit before jumping to payloadWerner Zeh
Once coreboot is ready and payload has been loaded a bit inside the NC FPGA needs to be set to notify this event. As there are NC FPGAs with different PCI device IDs save the BAR0 address in a global variable once the driver evaluates this address. It can then be used to access the register from the boot state machine callback without the need of searching for all possible PCI devices again. As this driver is only used at ramstage there is no need of using CAR_GLOBAL for the global variable. Use a Kconfig switch to make this feature selectable from mainboard as not every mainboard may have a FPGA with that capability. Change-Id: I9cd09e7051edde30d144a7e020b84bb549e9e8b9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-28siemens/nc_fpga: Move some parameters to another functionMario Scheithauer
For general use of this driver it is necessary to move some parameters from init_fan_ctrl() to init_temp_mon(). This shift does not lead to any functional change. Change-Id: I6b8f770c768f3dacf96087eb0194cc99f0d11e17 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-28siemens/nc_fpga: Add support for lowest FAN speed to FAN controllerWerner Zeh
The functionality of the FAN controller is extended to provide a lowest startup speed of the FAN. Add the parameter "fanmin" to the fan_ctrl_t structure and initialize the value. Change-Id: Ib2e093ed6f5fc29bbea879779eb4777eb371b937 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-15siemens/nc_fpga: Fix wrong type castWerner Zeh
As "var" is not a pointer but a variable there is no need to cast it to a pointer before using the value. Change-Id: I7f8e3ceadaa4301c50c5f5480cccab2be904aa9a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-11siemens/nc_fpga: Modify macro FPGA_SET_PARAM to avoid hwilib errorsWerner Zeh
The macro FPGA_SET_PARAM was introduced to make the setting of different FPGA registers with the appropriate values from hwinfo more transparent. The hwilib takes care about the size of the provided buffer where the requested value should be stored in. The fields in hwinfo have not always the same size as the matching registers in the FPGA. So to avoid errors resulting in a too small buffer when calling hwilib_get_field() the buffer is now fixed to 32 bit and will be casted to the destination type when the value is written into the FPGA register. Changing the field size in hwilib would be the wrong way as the defined lengths are specified this way to be expandable in the future. In addition the number of maximum supported temperature sensors is increased to 8 as the FPGA now supports more. Change-Id: I0c697106783158420708a973c3cff2be90fa4fce Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-02siemens/nc_fpga: Rename freeze_mode to freeze_disableWerner Zeh
The flag FF_FreezeDis marks if this feature is disabled. For a better readability rename freeze_mode to freeze_disable and invert the meaning of this information. Change-Id: I648b2392d2c8046965479511fde485a9cb934378 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-13siemens/nc_fpga: Expand FPGA functionalityMario Scheithauer
The siemens/mc_apl1 mainboard needs more functionality provided by Siemens NC FPGA. The additional functionality contains backlight brightness/PWM control and Dsave time for board reset. Change-Id: I6b65b01f0d67afe598b7c005868f71b00dec56fd Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-06siemens/nc_fpga: Add driver for Siemens NC FPGAWerner Zeh
Add driver code to initialize Siemens NC FPGA as PCI device. Beside some glue logic it contains a FAN controller and temperature monitor. Change-Id: I2cb722a60081028ee5a8251f51125f12ed38d824 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>