summaryrefslogtreecommitdiff
path: root/src/drivers/pc80
AgeCommit message (Collapse)Author
2016-12-13pc80: Move set_boot_successful()Kyösti Mälkki
Don't implement arch or driver -specific code under lib/, Change-Id: If75980ec5efc622582e2b5e124ad0e7ee3fa39a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17793 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28Build system: Update HAVE_CMOS_DEFAULTMartin Roth
- Don't build the cmos.default file into cbfs if USE_OPTION_TABLE isn't specified. - Don't allow HAVE_CMOS_DEFAULT if HAVE_OPTION_TABLE isn't set. Change-Id: I92401e892f09fc95d4b3fd7418cdbd10ed033fa8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24driver/pc80/tpm: Runtime generate ACPI table for TPM driverNaresh G Solanki
Runtime write acpi table for TPM driver. Change-Id: I70896e5874c24f17fca0c48b138ad4917b273f5b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17425 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-17rtc: Force negative edge on SET after battery replacementMarshall Dawson
After the RTC coin cell has been replaced, the Update Cycle Inhibit bit must see at least one low transition to ensure the RTC counts. The reset value for this bit is undefined. Examples have been observed where batteries are installed on a manufacturing line, the bit's state comes up low, but the RTC does not count. Change-Id: I05f61efdf941297fa9ec90136124b0c8fe0639c6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17rtc: Check update-in-progress bitMarshall Dawson
While the real-time clock updates its count, values may not be correctly read or written. On reads, ensure the UIP bit is clear which guarantees a minimum of 244 microseconds exists before the update begins. Writes already avoid the problem by disabling the RTC count via the SET bit. Change-Id: I39e34493113015d32582f1c280fafa9e97f43a40 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17369 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-14drivers/pc80/tpm: Select TPM device name based on Kconfig optionSubrata Banik
Device ID remains same for SLB9670 Infineon TPM 1.1 and TPM 2.0 chip. Hence select based on TPM2 Kconfig option. BUG=none BRANCH=none TEST=Build and boot SKL RVP with SPI TPM 2.0 module Change-Id: I57e63f2f2899d25ed6b797930fd8bf1d1cdc1b1d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17374 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31src/drivers: Capitalize CPU, RAM and ACPIElyes HAOUAS
Change-Id: I720469ea1df75544f5b1e0cab718502d8a9cf197 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15983 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-06rtc: Do checksum check for all bytesStefan Reinauer
Due to missing braces (that went undetected because of the indentation), I584189d9fcf7c9b831d9c020ee7ed59bb5ae08e8 CMOS: add set_option() only takes the last changed byte into regard when determining whether the checksum needs to be updated. This bug went undetected for 5 years. Change-Id: I47cedc801a60959386dfdcda3a13b8e3162a7ecb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14616 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10northbridge/intel/i440bx: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i440BX boards in the chipset. Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05tpm/acpi/tpm.asl: Only include tpm.asl if tpm is enabledMartin Roth
If the TPM code isn't getting built in, the Kconfig symbol CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating an invalid operating region in the ACPI tables, causing a bluescreen in windows. This should fix this issue: https://ticket.coreboot.org/issues/35 "commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module) breaks Windows" Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-26tree wide: Convert "if (CONFIG_.*_TPM.*)" to "if (IS_ENABLED(...))"Denis 'GNUtoo' Carikli
Change-Id: Ib73abb0ada7dfdfab3487c005719e19f51ef1812 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/13779 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-18acpi/tpm: Gracefully handle missing TPM module.Tobias Diedrich
When TPM support is enabled, verify the TPM_DID_VID field is not all zeroes or all ones before returning 0xf in the _STA method. This avoids these kernel errors when no module is installed: [ 3.426426] tpm_tis 00:01: tpm_transmit: tpm_send: error -5 [ 3.432049] tpm_tis: probe of 00:01 failed with error -5 Change-Id: Ia089d4232e0986b3bc635d346e68d982e8aecd44 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/13713 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-18drivers/pc80: Add optional spinlock for nvram CBFS accessTimothy Pearson
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following: AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030] Decoding the faulting address: 0x000000fdf9103300 fdf91x Hypertransport system management region 33 SysMgtCmd (System Management Command) = 0x33 3 Base Command Type = 0x3: STPCLK (Stop Clock request) 3 SMAF (System Management Action Field) = [3:1] = 0x1 1 Signal State Bit Map = [0] = 0x1 Therefore, the error appears to be triggered by an upstream C1E request. This was eventually traced to concurrent access to the SP5100's SPI Flash controller by multiple APs during startup. Calls to the nvram read functions get_option and read_option call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash controller, thus placing the SP5100 in an invalid state. This limitation is not documented in any public AMD errata, and was only discovered through considerable debugging effort. Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12061 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-03drivers/pc80: Rework normal / fallback selector codeTimothy Pearson
Per IRC and Gerrit discussion, the normal / fallback selector code is a rather weak spot in coreboot, and did not function correctly for certain use cases. Rework the selector to more clearly indicate proper operation, and also remove dead code. Also tentatively abandon use of RTC bit 385; a follow-up patch will remove said bit from all affected mainboards. The correct operation of the fallback code selector approximates that of a power line recloser, with a user option to attempt normal boot that can be cleared by firmware, but never set by firmware. Additionally, if cleared by user, the fallback path should always be used on the next reboot. Change-Id: I753ae9f0710c524875a85354ac2547df0c305569 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12289 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27tpm: acpi: Add support for TPM PIRQDuncan Laurie
With SPI TPMs there is no SERIRQ for interrupts, instead it is a PIRQ based interrupt. The TCG PC Client Platform TPM Profile Specification says it must be active low and shared. This can be enabled with the CONFIG_TPM_PIRQ option that will specify the interrupt vector to report for the TPM. BUG=chrome-os-partner:40635 BRANCH=none TEST=verify TPM interrupt functionality in /proc/interrupts on glados Change-Id: Iad3ced213d1fc5380c559f50c086206dc9f22534 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: abdd0b8ecdf51ff32ed8bfee0823bbc30d5d3d49 Original-Change-Id: If7d22dfcfcab95dbd4c9edbd8674fc8d948a62d2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/304133 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12147 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-14x86: add standalone verstage supportAaron Durbin
To support x86 verstage one needs a working buffer for vboot. That buffer resides in the cache-as-ram region which persists across verstage and romstage. The current assumption is that verstage brings cache-as-ram up and romstage tears cache-as-ram down. The timestamp, cbmem console, and the vboot work buffer are persistent through in both romstage and verstage. The vboot work buffer as well as the cbmem console are permanently destroyed once cache-as-ram is torn down. The timestamp region is migrated. When verstage is enabled the assumption is that _start is the romstage entry point. It's currently expected that the chipset provides the entry point to romstage when verstage is employed. Also, the car_var_*() APIs use direct access when in verstage since its expected verstage does not tear down cache-as-ram. Lastly, supporting files were added to verstage-y such that an x86 verstage will build and link. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using separate verstage. Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-28tpm: acpi: Make _CRS method serializedDuncan Laurie
Since the TPM _CRS method creates named objects it needs to be serialized to prevent a warning in recent iasl. BUG=chrome-os-partner:40635 BRANCH=none TEST=build glados with iasl-20150717 Change-Id: I59a52552ab24b7d9c9928331aa8c8d19f54fd1b7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2a5c474c94980661573a99eb94d5f661f2d0114b Original-Change-Id: Ie9d164ea8781304dd0bf1833d182d7c601b8e18d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302162 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11715 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-09drivers/pc80: Do not initialize PS2 keyboard by defaultAlexandru Gagniuc
The most common payloads do not need this set, so optimize for the common case. Change-Id: I2e5b68d74e9b91b41bbbcffc17d31d5c1bb38fd4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8599 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-09-08drivers/pc80/tpm: Set "Found TPM" message to BIOS_INFO levelDuncan Laurie
Having no supplied printk level makes this info message printed at all levels and so it shows up when booting with DEFAULT_CONSOLE_LOGLEVEL=3. BUG=chrome-os-partner:40635 BRANCH=none TEST="USE=quiet-cb emerge-glados coreboot" Change-Id: I6c52aafbe47fdf297e2caeb05b4d79a40a9a4b9d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e6cffc6d5a9fcda60a04f8a31f2b2ffe4b620c77 Original-Change-Id: Ie6715d15f950d184805149619bebe328d528e55a Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297336 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11559 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-09drivers/pc80/i8254.c: Indent with GNU indent 2.2.11Paul Menzel
Run `indent -linux src/drivers/pc80/i8254.c` and manually put the `;` in the while loop back on a separate line. Change-Id: I58c4c5df3846a91ef92aafb608962dc26a21f811 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-07Fix Kconfig whitespace.Martin Roth
All other Kconfig locations start with tabs. Change-Id: I0ee5f0b0b82f85c8ae58b3626f142f159554efb3 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10438 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-02tpm: Add dummy _DSM to make Bitlocker happy.Vladimir Serbinenko
Change-Id: Ieb6f70f5b2863336bd6143b2dfbb1d67c4c26109 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10323 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02cbfs: new API and better program loadingAaron Durbin
A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02TPM: Add Infineon SLB9670 SPI TPM supportWenkai Du
This patch provides support for TPM Infineon SLB9670 by adding its device ID to the list. BRANCH=None BUG=chrome-os-partner:40640 TEST=Built and test SLB9670 on SKL U Reference board Fab 2 Change-Id: I2d26fc6c7d074881f2e6189e1325808544b7d26d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c92884be75b631c302801e162292c245ed7bf5d Original-Change-Id: I4607fc96f70175b2461b40ba61e7a821e187de40 Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/274053 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/10387 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-29tpm: Add Infineon TPM 1.2 supportSubrata
This patch provides support for TPM Infineon TT1.2 devices by enumerating the TT1.2 ID in the Infineon device list. BRANCH=None BUG=None TEST=Built for sklrvp and tested on RVP3. Change-Id: I9daecc09311477fd9947e829d80abc040b2c9e3d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3ff86f96cb3e2f203dbc86e7004f1a037b98b90a Original-Change-Id: I8b59eba348fc44632e22600646eb0b10eb2f4901 Original-Signed-off-by: Subrata <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/271256 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/10302 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-29tpm: Fix multiple device supportSubrata
Current TPM driver does not support multiple devices for a given vendor. As the device object never takes the 2nd ID in the list. This patch fixes the same. BRANCH=None BUG=None TEST=Built for sklrvp and tested on RVP3. Change-Id: I82c3267c6c74b22650fc53dc6abdc2eb3daa138e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ff42613f11b4f1a79e907601f1ecb7b83a3aeaab Original-Change-Id: Ieb44735c37208bfe90a8e22e0348dd41c8c642d2 Original-Signed-off-by: Subrata <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/271727 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Commit-Queue: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Reviewed-on: http://review.coreboot.org/10303 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-27Deactivate TPMVladimir Serbinenko
Just not exporting TPM isn't good enough as it can still be accessed. You need to send it a deactivate command. Change-Id: I3eb84660949c2d1e2b492d541e01d4ba78037630 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10270 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-27Move TPM code out of chromeosVladimir Serbinenko
This code is not specific to ChromeOS and is useful outside of it. Like with small modifications it can be used to disable TPM altogether. Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10269 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-23Hide TPM_TIS_BASE_ADDRESSVladimir Serbinenko
TPM_TIS_BASE_ADDRESS is technical setting, shouldn't be user-visible. Change-Id: Ibf74f52be16fb7d2cfa78419087a4c3e7607368a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10271 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-07kbuild: Use wildcard for driver subdirectoriesStefan Reinauer
Change-Id: Id1685c0b28ec8e3ab972a671af6f2de6f321c645 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9805 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-22rtc: add config flag to denote rtc API availabilityPatrick Georgi
RTC drivers now select RTC, so that code which depends on them can implement fallback behavior for systems that lack the hardware or driver. Change-Id: I0f5a15d643b0c45c511f1151a98e071b4155fb5a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9953 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-21Unify byte order macros and clrsetbitsJulius Werner
This patch removes quite a bit of code duplication between cpu_to_le32() and clrsetbits_le32() style macros on the different architectures. This also syncs those macros back up to the new write32(a, v) style IO accessor macros that are now used on ARM and ARM64. CQ-DEPEND=CL:254862 BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu, Storm and Urara. Booted on Jerry. Tried to compare binary images... unfortunately something about the new macro notation makes the compiler evaluate it more efficiently (not recalculating the address between the read and the write), so this was of limited value. Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254866 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Manually clean up the mess left by write32() transitionJulius Werner
This patch is a manual cleanup of all the rubble left by coccinelle waltzing through our code base. It's generally not very good with line breaks and sometimes even eats comments, so this patch is my best attempt at putting it all back together. Also finally remove those hated writel()-style macros from the headers. BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254865 Reviewed-on: http://review.coreboot.org/9837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13tpm: Only expose base address Kconfig option when enabledPatrick Georgi
Change-Id: Ia8ddd689a3bf09ed68f94907ea19d4d2ee874542 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/9594 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10tpm: Remove error message for unknown resource typeDuncan Laurie
This is being triggered because the base address is added, but there is nothing that needs done with it in set_resources step and the ERROR message is tripping suspend resume test scripts. BUG=chrome-os-partner:33385 BRANCH=samus,auron TEST=boot on samus and check for ERROR strings, successfully run suspend_stress_test without failures Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/231603 (cherry picked from commit bb789492965d92e309a913dc7b9f09f7036c5480) Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I565c8af954f1c5a406d2c65f01c274e9259e43ec Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9062734d884f814dc880589ee615b4d7e1fdc61a Original-Change-Id: I2b5f44795f1ee445d509b29bd56f498aea7b7fe3 Original-Reviewed-on: https://chromium-review.googlesource.com/231604 Original-Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9476 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10tpm: Add ramstage driver and interrupt configurationDuncan Laurie
This adds a ramstage driver for the TPM and allows the interrupt to be configured in devicetree.cb. The interrupt vector is set like other PNP devices, and the interrupt polarity is set with a register configuration variable. These values are written into locality 0 TPM_INT_VECTOR and TPM_INT_ENABLE and then all interrupts are disabled so they are not used in firmware but can be enabled by the OS. It also adds an ACPI device for the TPM which will configure the reported interrupt based on what has been written into the TPM during ramstage. The _STA method returns enabled if CONFIG_LPC_TPM is enabled, and the _CRS method will only report an interrupt if one has been set in the TPM itself. The TPM memory address is added by the driver and declared in the ACPI code. In order to access it in ACPI a Kconfig entry is added for the default TPM TIS 1.2 base address. Note that IO address 0x2e is required to be declared in ACPI for the kernel driver to probe correctly. BUG=chrome-os-partner:33385 BRANCH=samus,auron TEST=manual testing on samus: 1) Add TPM device in devicetree.cb with configured interrupt and ensure that it is functional in the OS. 2) Test with active high and active low, edge triggered and level triggered setups. 3) Ensure that with no device added to devicetree.cb that the TPM is still functional in polling mode. Change-Id: Iee2a1832394dfe32f3ea3700753b8ecc443c7fbf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: fc2c106caae939467fb07f3a0207adee71dda48e Original-Change-Id: Id8a5a251f193c71ab2209f85fb470120a3b6a80d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226661 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9469 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10tpm: Move the LPC TPM driver to a subdirectoryDuncan Laurie
This moves the LPC TPM driver to drivers/pc80/tpm so it can be turned into a ramstage driver with a chip.h It includes no other changes yet. BUG=chrome-os-partner:33385 BRANCH=samus,auron TEST=emerge-samus coreboot Change-Id: Iac83e52db96201f37a0086eae9df244f8b8d48d9 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: be2db391f9da80b8b75137af0fe81dc4724bc9d1 Original-Change-Id: I60ddd1d2a3e72bcf169a0b44e0c7ebcb87f4617d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226660 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9468 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-29drivers/pc80/mc146818rtc_early: Honor Kconfig reboot count clear settingTimothy Pearson
Change-Id: I6426ea2ca1732a6edfae059fe5dbf4f398bc9b98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9155 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-02-23drivers/pc80/mc146818rtc: Enable RTC reset on power lossWerner Zeh
If function cmos_init() was called with parameter invalid set, this indicates, that the caller has found a power loss event in the RTC registers. In this case, we need to load the default date and time because it can be corrupted. Change-Id: Ib8d58a14da0182ceb8167e67440a0f1ea2a20eb7 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8373 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-16nvram: Add option to reset NVRAM to default parameters on every bootTimothy Pearson
In specific configurations, such as homogeneous supercomputing systems, changeable NVRAM parameters are more of a liability than a useful tool. This patch allows a coreboot image to be compiled that will always set the NVRAM parameters to their default values, reducing maintainance overhead on large clusters. Change-Id: Ic03e34211d4a58cd60740f2d9a6b50e11fe85822 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8446 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06drivers/pc80/mc146818rtc: Reduce superfluous preprocessor useAlexandru Gagniuc
cmos_init() had layers of preprocessor directives, which resulted in a complete mess. Refactor it to make use of the IS_ENABLED() macro. This improves readability significantly. One of the changes is to remove in inline stub declaration of (get|set)_option. Although that provided the ability for the compiler to optimize out code when USE_OPTION_TABLE is not selected, there is no evidence that such savings are measureable. Change-Id: I07f00084d809adbb55031b2079f71136ade3028e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8306 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30drivers/pc80/mc146818rtc: Assume we always have ALTCENTURYGabe Black
This patch has a rather twisted history. It was originally split off from a chromium patch, which moved ALTCENTURY to Kconfig. However, since we have no user without ALTCENTURY, we've agreed that the best way to proceed is to eliminate the non-ALTCENTURY case entirely. The old commit message and identifiers are kept below for reference: The availability of "ALTCENTURY" is now set through a kconfig variable so it can be available to the RTC driver without having to have a specialized interface. BUG=None TEST=Built and booted on Link with the event log code modified to use the RTC interface. Verified that the event times were accurate. BRANCH=nyan Original-Change-Id: Ifa807898e583254e57167fd44932ea86627a02ee Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197795 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> This is the second half the following patch. (cherry picked from commit 9e0fd75142d29afe34f6c6b9ce0099f478ca5a93) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8e871f31c3d4be7676abf9454ca90808d1ddca03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7987 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30rtc: Add an RTC API, and implement it for x86.Marc Jones
This CL adds an API for RTC drivers, and implements its two functions, rtc_get and rtc_set, for x86's RTC. The function which resets the clock when the CMOS as lost state now uses the RTC driver instead of accessing the those registers directly. BUG=None TEST=Built and booted on Link with the event log code modified to use the RTC interface. Verified that the event times were accurate. BRANCH=nyan Original-Change-Id: Ifa807898e583254e57167fd44932ea86627a02ee Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197795 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> This is the first half of the patch. (cherry picked from commit 9e0fd75142d29afe34f6c6b9ce0099f478ca5a93) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I159f9b4872a0bb932961b4168b180c087dfb1883 Reviewed-on: http://review.coreboot.org/7889 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
As build.h is an auto-generated file it was necessary to add it as an explicit prerequisite in the Makefiles. When this was forgotten abuild would sometimes fail with following error: fatal error: build.h: No such file or directory Fix this error by compiling version.c into all stages. Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7510 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-09-10tpm: Clean up I2C TPM driverStefan Reinauer
Drop a lot of u-boot-isms and share common TIS API between I2C driver and LPC driver. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I43be8eea0acbdaef58ef256a2bc5336b83368a0e Reviewed-on: https://chromium-review.googlesource.com/175670 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3fc8515b9dcef66998658e1aa5c020d22509810c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6855 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10drivers: Add I2C TPM driver to corebootStefan Reinauer
On ARM platforms the TPM is not attached through LPC but through I2C. This patch adds an I2C TPM driver that supports the following chips: * Infineon SLB9635 * Infineon SLB9645 In order to select the correct TPM implementation cleanly, CONFIG_TPM is moved to src/Kconfig and does the correct choice. Old-Change-Id: I2def0e0f86a869d6fcf56fc4ccab0bc935de2bf1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/167543 Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit b4049a0e96f6335a93877e1e884f9a440487c421) i2c tpm: Remove mostly useless delay code/tables. I assume from the code in the TPM driver that the TPM spec defines different types of delays and timeouts which each have a particular duration, and that the TPM can tell you how long each type is if you ask it. There was a large table, some members of a data structure, and a function or two which managed the timeouts and figured their value for different operations. The timeout values for the various "ordinals" were never set in the vendor specific data structure, however, and always defaulted to 2 minutes. Similarly the timeouts a, b, c, and d were never overridden from their defaults. This change gets rid of all the timeout management code and makes the "ordinal" timeout 2 minutes and the a, b, c, and d timeouts 2 seconds, the larger of the two default values. This is a port from depthcharge to coreboot, original change: https://chromium-review.googlesource.com/#/c/168363/ Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Old-Change-Id: I79696d6329184ca07f6a1be4f6ca85e1655a7aaf Reviewed-on: https://chromium-review.googlesource.com/168583 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b22395a73f361c38626911808332a3706b2334fe) TPM: Stop requesting/releasing the TPM locality. The locality is requested when the TPM is initialized and released when it's cleaned up. There's no reason to set it to the same thing again and restore it back to the same value before and after every transaction. forward ported from https://chromium-review.googlesource.com/#/c/168400 Old-Change-Id: I291d1f86f220ef0eff6809c6cb00459bf95aa5e0 Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168584 Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit cc866c20c6f936f349d2f1773dd492dca9bbf0c1) Squashed three commits for the i2c tpm driver. Change-Id: Ie7a50c50fda8ee986c02de7fe27551666998229d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6519 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-07-08drivers: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Ie80c87c614a536cc6b0bdbf196c280b64547d3b7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6203 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-01stdlib: Drop duplicates of min() and max()Kyösti Mälkki
Change-Id: Ib2f6fad735e085d237a0d46e0586e123eef6e0e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6161 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-29drivers/pc80/mc146818rtc_early.c: Silence unused func complaintsEdward O'Callaghan
Clang complains these functions are unused since they find their way into the bootblock of ROMCC boards by #including the .c file. These static inlines should probably be moved into a header in reality. Change-Id: I9d82a6befb0ac99afab6265f9d3649e419f2887d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6122 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-21PC80 RTC: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Idc4c47f3802019c2853ec71f8e9c057c3ab8d3ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6074 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21PS2 keyboard: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I812cc40e50a1e7e13caed48a1693feb8658b645c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6073 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-11PIC i8259: Move #defines and functions to i8259.hMike Loptien
The PIC i8259.c file has a lot of #defines and function definitions in it. I am moving these to the i8259.h file and also adding a few functions to update the PIC IRQ mask register. The PIC default configuration has all of its interrupts masked off except for IRQ2. IRQ2 is where the Slave PIC is cascaded from the Master PIC. Change-Id: I78d505358c29fadbc184137a09120863ea1d5c13 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5950 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-29add rtc_init() to romstageMartin Roth
The FSP clears the bit that tells us whether or not the RTC has lost power when it sets up memory. Because of this, we need to initialize the RTC in romstage instead of ramstage. Change-Id: I158e4339fc539d32cfb2428042df6156d312a5f4 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5735 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-23drivers/pc80/Kconfig: Revert PS/2 initialization defaultsPatrick Georgi
Remove the inconsistent behaviour based on unrelated configuration: PS/2 init is now always enabled. This can change once we find a better approach. Change-Id: Ia8d55032f0e5eca0bf82d77df7dab95bcb2b353a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5634 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2014-05-15drivers/pc80/Kconfig: simplify PS/2 selection rulesPatrick Georgi
There's no need to state the dependency twice. Change-Id: Ia241d441211c6f476d0a6ed7589b038f7a220265 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5633 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
This is a empty struct that has propagated through the superio's & ec's but really does nothing. Time to get rid of it before it adds yet more cruft. However, since this touches many superio's at once we do this in stages by first changing the function type to be a pure procedure. Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5617 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-02drivers/pc80/Kconfig: Do not init PS/2 keyboard if GRUB 2 is chosen as payloadPaul Menzel
If the user selects GRUB 2 as the payload in Kconfig, coreboot does not need to initialize the PS/2 keyboard as GRUB 2 is going to do it. Change-Id: Ia5d902e7c0fa34eaff26a31507751815bf2d2581 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02drivers/pc80/Kconfig: Do not init PS/2 keyboard if SeaBIOS is chosen as payloadPaul Menzel
As the Kconfig description of `DRIVERS_PS2_KEYBOARD` says, SeaBIOS is able to initialize the PS/2 keyboard itself, so it is not necessary to let coreboot do it. SeaBIOS is also able to do it faster as discussed in a thread on the coreboot mailing list from October 2010 [1]. In that thread it was also proposed to not let coreboot initialize the PS/2 coreboot when SeaBIOS is used as a payload. [1] http://www.coreboot.org/pipermail/coreboot/2010-October/thread.html#61310 subject: [coreboot] coreboot+seabios timings Change-Id: I1248cec3e2ca5b9311e46df8aabf67e14ffd4ea6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02drivers/pc80/Kconfig: Mention that GRUB 2 is able to init PS/2 keyboardPaul Menzel
Change-Id: I0783ee123e0e1ecd5603bc6a40b53d3b0c23bf6d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26Get rid of HAVE_INIT_TIMER config optionFurquan Shaikh
There is redundancy in terms of use of init_timer. We have a Kconfig option to decide whether a board has init_timer as well as we use a stub for init_timer in places where we do not have any init_timer defined. Thus, remove the Kconfig option. Henceforth, all boards that do not have init_timer functionality can include a stub_timer if required. Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-06spkmodem: Move under drivers/pc80Kyösti Mälkki
Change-Id: I46eb17ab19cea8759b3e4822019285cbe907e83a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5134 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-01-26pc80/keyboard: Ignore interface test failure.Vladimir Serbinenko
On Asus A8N-E this test fails but if failure is ignored keyboard works. Change-Id: Ifeeff2f41537b35bc90a679f956fea830b94292c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4816 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-23keyboard.c: fix coding style with indentAndrew Wu
Change-Id: Ie8efa9fb9bdc65bf8015eec197f44c432e87d907 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3986 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-12lib/cbfs_core.c: Supply size of file as well in cbfs_get_file_contentVladimir Serbinenko
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4659 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21tpm: provide explicit tpm register accessAaron Durbin
An issue was observed using a specific vendor's TPM in that it chokes on access to registers that are not explicitly defined in the PC client specification. The previous driver used generic access functions for reading and writing registers. However, issues come to play when reading from the status register. It read it as a 32-bit value, but that read address 0x1b which is not defined in the spec. Instead of using generic access functions for the tpm registers provide explicit ones. To that end provide more high level wrapper functions to perform the semantic access required. Change-Id: I781b31723f819e1387d7aa25512c83780ea0877f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63243 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4388 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Remove PS/2 keyboard initialization on resume from S3Martin Roth
When we go through the resume path, there shouldn't ever be a need to initialize the PS/2 keyboard. The OS is going to reinitialize it anyway, and it just slows the resume. Verified Code flow in normal boot/S3 resume with print statements. Verified Keyboard was correctly disabled and flushed by booting to recovery mode screen while pressing keys on the integrated keyboard. Change-Id: I48bdca2fa2cc0c965401d10fef75cadb09d2e1e9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63648 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4396 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-14drivers/pc80: Add ACPI description.Vladimir Serbinenko
AT controller needs an ACPI node, otherwise FreeBSD doesn't detect keyboard and mouse. Currently each SuperIO adds its own description. This one should be used in the future instead. Change-Id: Iaad5ed3846c6d9f467a02a286a1e6f60a3607af5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4518 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-25pc80/mc146818rtc: Return an error code rather than an integerAlexandru Gagniuc
Do not return hardcoded numerical values to communicate succes/failure, but instead use an enumeration. Change-Id: I742b08796adf136dce5984b702533f91640846dd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4265 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25RTC: Skip rtc_init() in S3 resume pathStefan Reinauer
In addition to not clearing the pending interrupts, we also don't want to reset the RTC control register when booting with an S3 resume. On most new systems, when the RTC well is losing power, we will also lose state that is required to perform a resume, so we end up in a normal boot anyways. Hence don't do any RTC initialization in the S3 resume path. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I73b486082faa741e9dccd15f2b8e3a8399c98f80 Reviewed-on: https://gerrit.chromium.org/gerrit/56826 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Derek Basehore <dbasehore@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-10-13Rename cpu/x86/car.h to arch/early_variables.hStefan Reinauer
and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-07-10drivers: Fix spellingMartin Roth
Change-Id: Ib0d98e3ab5b2943c36f88765587e8963a4f49604 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3754 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-16pc80/tpm: allow for cache-as-ram migrationAaron Durbin
As the TPM driver can be accessed in romstage after cache-as-ram is torn down use the cache-as-ram migration API to dynamically determine the global variable address. Change-Id: I149d7c130bc3677ed52282095670c07a76c34439 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3233 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-19RTC: Use the correct index when setting the default monthDave Frodin
Change-Id: I947a8b7ccd6141f164d1e63f7b8f524efa6c00f2 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2442 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
Summary: Isolate CBFS underlying I/O to board/arch-specific implementations as "media stream", to allow loading and booting romstage on non-x86. CBFS functions now all take a new "media source" parameter; use CBFS_DEFAULT_MEDIA if you simply want to load from main firmware. API Changes: cbfs_find => cbfs_get_file. cbfs_find_file => cbfs_get_file_content. cbfs_get_file => cbfs_get_file_content with correct type. CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM, the ROM may come from USB, UART, or SPI -- any serial devices and not available for memory mapping. To support these devices (and allowing CBFS to read from multiple source at the same time), CBFS operations are now virtual-ized into "cbfs_media". To simplify porting existing code, every media source must support both "reading into pre-allocated memory (read)" and "read and return an allocated buffer (map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*" provides simple memory mapping simulation. Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA is defined for CBFS functions to automatically initialize a per-board default media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS function names relying on memory mapped backend (ex, "cbfs_find" => actually loads files). Now we only have two getters: struct cbfs_file *entry = cbfs_get_file(media, name); void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type); Test results: - Verified to work on x86/qemu. - Compiles on ARM, and follow up commit will provide working SPI driver. Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30build system: Treat cmos.default as text filePatrick Georgi
It's a more easily maintainable format than a 128 byte binary blob Change-Id: Ic9b9f53cd025b5f89a21971930fabf6592f95d67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1867 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Clean up KconfigStefan Reinauer
- move VGA handling options into devices/Kconfig - make Devices a top level menu - move some options "closer" to the code they control Change-Id: Ia79541d18b2b0d9b89a8b154255e312060627c48 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1840 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop Kconfig.deprecated_optionsStefan Reinauer
Both remaining options, DRIVERS_PS2_KEYBOARD and ID_SECTION_OFFSET are not likely to go away any time soon, so let's not keep them in Kconfig.deprecated_options but move them close to the code they control. Change-Id: I310b877c5b3d5a3444056641c4aee07a48c4c4be Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1839 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12If cmos is invalid, always set the rtc date and timeStefan Reinauer
If cmos is invalid for any reason, always set the date and time before marking RTC valid. Change-Id: Ib9d154802f75221d58bf28ba9c813f2529904596 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1790 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Remove duplicate defines from mc146818rtc.cMarc Jones
Remove the duplicate #defines and use what is set in mc146818rtc.h. Change-Id: Ic471e03c68b591d19c0646fdbea78374af11c8b8 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1789 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09mc146818rtc: Remove the hyphen to build on NetBSD and DarwinZheng Bao
http://netbsd.gw.com/cgi-bin/man-cgi?date++NetBSD-current The NetBSD manual tells us the date in NetBSD doesn't take any flags to enable or disable padding in the format. By default, date pads numeric fields with zeroes. This will convert the number to octal one. So add "0x" to convert it to BCD directly. Change-Id: Icd44312acf01b8232f1da1fbaa70630d09007b40 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09mc146818rtc: Update the Day of Week in CMOS in the right way.Zheng Bao
The range of weekday in CMOS is 01-07, while the Sunday is 1, and Saturday is 7. The comand date in coreutils defines %u day of week (1..7); 1 is Monday %w day of week (0..6); 0 is Sunday There are 1 day offset for each week day. So we use "%w" and plus 1 before we update the weekday in CMOS. Change-Id: I3fab4e95f04924ff0ba10a7012b57da1d3f0d1a5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1802 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-08RTC: Don't clear pending interrupt in resume pathDuncan Laurie
The linux kernel relies on the RTC reporting pending interrupts if the RTC alarm was used to wake the system. If we clear these flags here then the rtc-cmos driver in the kernel will think that no interrupts are pending and will not re-start the timerqueue to handle the alarm timerqueue node. This flag doesn't exist in SMM but the rtc code is compiled there. Since rtc_init() is not called by SMM it is guarded with an ifdef. I performed several thousand suspend/resume cycles without seeing an issue where hwclock was unable to read from /dev/rtc. There still is a potential kernel issue where the timerqueue can stall but this makes that much less likely to happen on resume. Change-Id: I5a343da4ce5c4c8ec4783b4e503869ccfa5077f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-07RTC: Write build date in BCD when clearing RTC CMOSDuncan Laurie
Check the RTC on boot after RTC battery failure and ensure that the reported build date matches what is reported: > grep ^rtc /proc/driver/rtc rtc_time : 01:00:21 rtc_date : 2012-08-16 Change-Id: If23f436796754c68ae6244ef7633ff4fa0a93603 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1709 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: add explicit dependency on build.hVincent Palatin
build.h is generated at build time, with highly parallel builds, we might try to compile the rtc driver too early. Change-Id: I9a2681484d58b67ed3061669fbdf52ac5ad14dab Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1698 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: erase CMOS memory after power failureVincent Palatin
When a power failure happens on the RTC rail, the CMOS memory (including the RTC registers) is filled with garbage. So, we erase the full first bank (112 bytes) and we reset the RTC date to the build date. To test, disconnect the CMOS battery to produce an RTC power failure, then boot the machine and observe the RTC date is the build date using "cat /sys/class/rtc/rtc0/date" Change-Id: I684bb3ad5079f96825555d4ed84dc0f7914e9884 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1697 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: force mc146818 register D to a correct valueVincent Palatin
On Panther Point PCH (and maybe cougar point), when some of the register D reserved bits are set, the RTC starts misbehaving (e.g. incrementing the year byte every second). There are probably undocumented features implemented behind those bits. Let's reset register D to a known state to ensure we get the expected RTC behavior. Change-Id: I7e2c2a2c6130a974bccb3d760b41eaa579a58b67 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1695 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Fix CONFIG_ use in i8254.cStefan Reinauer
We always define CONFIG_ variables, even if they're not set. Hence, remove the check whether CONFIG_UDELAY_TIMER2 is defined Change-Id: Iefdf2389941f2cc63ae4f13ac6b213da4c96b201 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1694 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-08-02RTC: Add a routine to check if the CMOS date is validzbao
If the CMOS is cleared or someone writes some random date/time on purpose, the CMOS date register has a invalid date. This will hurts some OS, like Windows 7, which hangs at MS logo forever. When we detect that, we need to write a reasonable date in CMOS. Alexandru Gagniuc: Hmm, it would be interesting to use the date the coreboot image was built and set that as the default date. At least until time travel is invented. Change-Id: Ic1c7a2d60e711265686441c77bdf7891a7efb42e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1389 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-01Fix TPM driver to work with multiple vendor TPMsStefan Reinauer
Port u-boot patch for low-level driver: - Fix bug in traversal of vendor name list. - Sending "command ready" needs additional logic to handle TPMs that need that bit set twice: once to empty the read FIFOs and once to actualy set command ready. Change-Id: I57c280266b2e966c5b90e4f9e968426a33b93cf1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/972 Tested-by: build bot (Jenkins)