summaryrefslogtreecommitdiff
path: root/src/drivers/net/chip.h
AgeCommit message (Collapse)Author
2022-02-14drivers/net/r8168: Add ASPM control mechanismAlan Huang
Add a new configuration parameter "enable_aspm_l1_2". Write value 0xe059000f to register offset 0xb0 to allow kernel driver to enable ASPM L1.2. Use Kconfig "PCIEXP_ASPM" and "enable_aspm_l1_2" to decide whether to enable ASPM L1.2. BUG=b:204309459 TEST=emerge and test if the driver can read the correct value Change-Id: I944dbf04d3ca19df4de224540bee538bff4d1f12 Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-23drivers/net/r8168: Modify to support RTL8125 LEDsRory Liu
The Realtek RTL8125 has four registers for four leds and a feature config register. We use led0 and led2 in brask, so modify ethernet driver. Those registers' IO address are based on RTL8125 datasheet. BUG=b:193750191 TEST=Modify overridetree.cb to verify LEDs' settings. Signed-off-by: Rory Liu <rory.liu@quanta.corp-partner.google.com> Change-Id: I4b05a859dc0a0d2b8d6b35d6491fc88f7077cb92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-06src/drivers: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I38eaffa391ed5971217ffad74a312b1641e431c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-01-30drivers/net/r8168: Add SSDT Power Resource MethodsEdward O'Callaghan
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH. Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become lively again. V.2: Ensure reset_gpio && enable_gpio are optional. BUG=b:147026979 BRANCH=none TEST=Boot puff and do 100 cycles of S0ix. Change-Id: I3ae8dc30f45f55eec23f45e7b5fbc67a4542f87d Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-27src/[arch-lib]: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ibb7b48a7a144421aff29acbb7ac30968ae5fe5ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/36329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10src/drivers: Fix typoElyes HAOUAS
Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27916 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-22drivers/net: Add device index for multiple NIC cardsGaggery Tsai
This patch adds a member device_index to r8168 chip information which allows driver to identify which NIC card requests MAC address. In this implementation, only 10 NIC cards are supported, the device index is in the range of 0 to 10. Regarding to MAC address mapping, when there is only one NIC on DUT, it is treated as a special case mapping to "ethernet_mac" in VPD for backward compatibility. When there are multiple NICs on DUT, they are mapping to "ethernet_macN" where N is [0-9]. Device tree configuration: For single NIC: .device_index = "0", maps to "ethernet_mac" For multiple NICs: .device_index = "[1-10]", maps to "ethernet_mac[device_index - 1]" BUG=b:69950854 BRANCH=None TEST=Added device_index = [0-10] under /drivers/net in device tree && Programmed the mac address to VPD in shell vpd -s ethernet_mac=<mac address> or vpd -s ethernet-mac[0-9]=<mac address> && reboot the system. Ensure the MAC address was fetched correctly by ifconfig command. Change-Id: I108b9bfba39370c8906a2fa4d2b39b106e884e0c Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-27drivers/net: add SSDT ACPI declaration and WOL featureGaggery Tsai
This patch adds SSDT ACPI generator and declares _UID, _HID, _DDN and also _PRW for WOL feature. Besides, adds a wake variable in chip information. BUG=b:69290148 BRANCH=None TEST=Add register "wake" = "GPE0_PCI_EXP" in devicetree under r8168 chip driver && dump SSDT to make sure _UID, _HID, _DDN and _PRW are filled correctly && put system into S3 && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL package. Change-Id: Ibc9115e8a08ba2bfcb3ee1e34c73cf1976a6ba2d Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-01drivers/net/r8168: Add customized LED modeGaggery Tsai
This patch adds a function to program a customized LED setting for Realtek 81xx family. It reads the settings from devicetree under target board and programs the setting to offset 0x18 and 0x19. BUG=b:65437780 TEST=Add customized_leds register in devicetree.cb under target board, enable RT8168_SET_LED_MODE flag. Make sure the setting is programmed correctly to offset 0x18 and 0x19. Observed the LEDs were behaving as expected. Executed suspend/resume and the LEDs were still working as expected. Change-Id: Ib3d4f2cd98ac391e1661a891d604bdd1974d07f6 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 11:56:49 +0000