summaryrefslogtreecommitdiff
path: root/src/drivers/intel
AgeCommit message (Collapse)Author
2023-09-05drivers/intel/fsp2_0: Introduce MRC cache store after FSP-M/S APIsSubrata Banik
This patch refactors the existing MRC cache storing logic, which was spread between the ROM and RAM stages, into a single early MRC cache store stage. The only exception is when SoC user selects FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after FSP-S). It reverts all the boot-state logic previously used to locate and store MRC cache from NVS HOB into NVS because majority of the platform can potentially use the early MRC cache store with improved memory caching at the pre-RAM phase (with the ramtop implementation). The only exception is the Xeon SP platform, which currently locates the MRC cache post in FSP-S (at ramstage). Therefore, this patch provides an API to the FSP 2.x silicon init code to perform late storing of the MRC cache. In majority cases the updated logic, the romstage (post FSP-M) will attempt to save the MRC cache. Platform that selects FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is enabled, the MRC cache will either be written directly to NVRAM at the romstage or stashed into CBMEM for a late NVRAM write at ramstage. Below table captures the change in the boot state w/ and w/o this patch for storing the MRC cache. Overall the goal is to ensure the platform behavior is remain unchanged before and after this patch. w/o this patch: | | Save MRC | Finalize | Lock the | | | Cache | MRC Cache | Boot Medium | +-----------+----------------+----------------+----------------+ | MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME | | NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT | +-----------+----------------+----------------+----------------+ | MRC_STASH | BS_DEV | BS_DEV | BS_DEV | | TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| +-----------+----------------+----------------+----------------+ | FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV | | DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| | SILICON | | | | | INIT | | | | +-----------+----------------+----------------+----------------+ | Platform | BS_PRE | BS_DEV | BS_DEV | | w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY| | config | | | | | (FSP 2.0 | | | | | platforms | | | | w/ this patch: | | Save MRC | Finalize | Lock the | | | Cache | MRC Cache | Boot Medium | +-----------+----------------+----------------+----------------+ | MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME | | NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT | +-----------+----------------+----------------+----------------+ | MRC_STASH | BS_DEV | BS_DEV | BS_DEV | | TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| +-----------+----------------+----------------+----------------+ | FSP_NVS | Post FSP-S | BS_DEV | BS_DEV | | DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY| | SILICON | | | | | INIT | | | | +-----------+----------------+----------------+----------------+ | Platform | Post FSP-M | BS_DEV | BS_DEV | | w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY| | config | | | | | (FSP 2.0 | | | | | platforms | | | | BUG=b:296704537 TEST=Able to build and boot google/rex without any boot time impact. Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-09-04{drivers/intel/fsp2_0, soc/intel}: Rename `SAVE_MRC_AFTER_FSPS` configSubrata Banik
This patch renames `SAVE_MRC_AFTER_FSPS` config to `FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon SP FSP implementation, where the FSP Silicon Init API produces Non-Volatile Storage (NVS) instead of the FSP-Memory Init API. According to the FSP 2.x specification (section 11.3), the FSP populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB after the FspMemoryInit() API in API mode. However, not all Intel SoC platforms that support the FSP 2.x specification adhere to this requirement. For example, the FSP binary for XEON SP platform produces NVS data (aka FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API. Therefore, attempting to locate NVS data after the FspMemoryInit() API on these platforms would result in an error. The `save_mrc_data.c` implementation provides the required hooks to locate the NVS post FSP-Silicon Init and store into Non-Volatile Storage. BUG=b:296704537 TEST=Able to build and boot Intel Xeon SP w/o any functional impact. Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-29drv/intel/fsp2_0: Add FW Splash Screen event log entriesSubrata Banik
This patch adds logic for logging the FW splash screen event to the event log. There could be three possible scenarios as below: 1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT or BMP_LOGO configs not enabled) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not present in the event log. 39 | 2023-08-27 12:42:54-0700 | System boot | 12 40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5 41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0 2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs are enabled) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is enabled in the event log. 34 | 2023-08-27 12:07:29-0700 | System boot | 11 35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled 36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5 37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0 3. Failed to render FW splash screen (due to any reason if FSP failed to render the splash screen) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is disabled in the event log. 43 | 2023-08-27 13:06:10-0700 | System boot | 13 44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled 45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5 46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0 BUG=b:284799726 TEST=Verify that the event shows up in the event log when the user selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display the firmware splash screen. Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-28drivers/intel/gma: Remove space between function name and '('Elyes Haouas
Change-Id: Id7634099e40c0bf97944be124b494c41d6335ad7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-26vc/intel: Remove unnecessary Kconfig optionsMartin Roth
These Kconfig options were being used basically as #define statements, which is unnecessary. This isn't a good use of Kconfig options and would be better just as #defines if actually needed. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-25drivers/intel/fsp2/Makefile.inc: Deduplicate compression type checksFelix Singer
When LZMA compression is selected, then it's not needed to check if LZ4 compression is selected in addition. So instead of handling both cases separately, check for LZ4 only if LZMA is not selected. This applies to the cases of both, FSP-M and FSP-S. Change-Id: I4ea61a38baf4c29bf522a50a26c6b47292e67960 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77323 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-19drivers/intel/fsp2_0: Fix extraneous text after else directiveSubrata Banik
Fix the issue by adding the "ifeq" keyword which makes the extraneous text a correct conditional directive. Change-Id: Id8a8aa7acfdaeb0549f417fb013b2535a7298045 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77286 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-18{driver, soc/intel/cmn/cse}: Refactor ISH FW Version implementationSubrata Banik
This patch uses the CSE firmware specific data to store Intel ISH firmware related information. Sending an ISH partition version information command on every boot cycle would impact the overall boot performance. This information is used by the auto-test framework to ensure the ISH firmware update is proper for in-field devices. BUG=b:285405031 TEST=Able to build and boot google/rex. Verified ISH FW version is getting displayed across warm resets without impacting the boot time. Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-08-17drivers/intel/fsp2_0: Add configurable compression for logo cbfs fileSubrata Banik
This patch adds a new configuration option to allow the compression algorithm for the logo cbfs file to be specified. By default, the logo cbfs file is compressed using LZMA. However, enabling LZ4 compression can save ~2ms of boot time when the BMP_LOGO config is enabled. This patch verified that the logo cbfs file can be booted using either LZMA or LZ4 compression. BUG=b:284799726 TEST=Able to boot google/rex and verified firmware splash screen using either LZMA or LZ4 compression. Change-Id: Ib0aa5320632ae3f734004d2b1d495af11c2e1928 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-11drivers/intel/fsp2_0: Add API to convert BMP images to GOP BLT bufferSubrata Banik
This patch adds an API to convert BMP images into GOP BLT buffers for Intel FSP-S. This is required to display the OEM splash screen at pre-boot phase. Previously, Intel FSP-S had provision to consume the *.BMP file as is. However, starting with the Alder Lake platform, Intel FSP has dropped this conversion logic and expects the boot firmware to pass the BLT buffer directly. This patch implements the conversion logic in coreboot. BUG=b:284799726 TEST=Able to build and boot google/rex Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-08-06drivers: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the drivers directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-03drivers/intel/gma/Kconfig: Remove unused INTEL_GMA_OPREGION_2_0Elyes Haouas
Change-Id: I9241d713fb8cc26c768746c8e442b46292036d20 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76694 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31drivers/intel/fsp2_0/fsp_timestamp.c: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I03c21e180e9e399e5cb451bf3b9cfb6484cab68b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76778 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-30drivers/intel/gma/intel_bios.h: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I80b4b2df4a38dcbb28d928018446e91acae90ee6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-07drivers/intel/fsp2_0: Remove BUILD_TIME_STAMP_SIZE macroRonak Kanabar
Remove BUILD_TIME_STAMP_SIZE macro from coreboot because FSP 3223 version have BUILD_TIME_STAMP_SIZE macro defined as part of `FspProducerDataHeader.h`. Ref change: 9c28ab1d1a vc/intel/fsp/mtl: Update header files from 3194_81 to 3223.80 BUG=b:285110116 TEST=Able to build google/rex. Change-Id: I52707adf1aa6dadca8dcf82102f76916a0cfe346 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23{commonlib/drivers}: Have option to store MRC version inside CBMEMSubrata Banik
This patch introduces CBMEM ID to store the MRC version (similar to existing implementation that stores the FSP-M version inside CBMEM ID) inside cbmem so the version information is available across the different coreboot stages. For example: * romstage: Use the CBMEM ID version information to check if the MRC cache is valid and need to erase the MRC cache * ramstage: Use the CBMEM ID to store the MRC cache into the non-volatile space. BUG=b:261689642 TEST=Able to build and boot google/rex and dump the MRC version as below. cbmem --list CBMEM table of contents: NAME ID START LENGTH ... 21. MRC VERSION 5f43524d 75ffeb60 00000004 ... localhost ~ # cbmem -r 5f43524d | hexdump 00000000 01 12 07 00 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I91f735239b33c6f8ba41c076048903e4b213c6a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75921 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23driver/intel/fsp2_0: Add support to store MRC cache using MRC versionSubrata Banik
This patch uses the "generic" variable name as "version" while storing the MRC cache data instead referring to the FSP-M version or MRC version. Hence, updated all the instances of `fsp_version/fspm_version` with `version`. Also introduces the new option to the MRC cache version that allows SoC users to store the MRC cache version based on the supported EDK2 version. Intel FSP built with EDK2 version 202302 onwards has support to retrieve the MRC version by directly parsing the binary. Additionally, added the helper function `fsp_mrc_version()` and corresponding header file to read the MRC version from the FSP binary. BUG=b:261689642 TEST=Able to build and boot google/rex and google/omnigul. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia8af53aed674ad4a3b426264706264df91d9c6b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75920 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-18drivers/intel/fsp2_0: Correct FPDT timestamp unit and macro nameRonak Kanabar
FSP performance timestamp is in nano second by default. This patch is to correct unit in FSP performance timestamp data print and macro name to avoid confusion. Change-Id: I4aec4f63beddbd7ce6e8e3fc1b53a45da2ee0b00 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75816 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-15{driver, mb, soc}: Rename Intel CSE FPT config to ISH FW version configSubrata Banik
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config is clear. Any platform would like to fetch the currently running ISH firmware version should select this configuration. TEST=Able to build and boot google/marasov. Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-02drivers/intel/fsp2_0: Apply FSP Reset Status W/A for MultiPhaseSiInitSubrata Banik
This patch calls into fsp_get_pch_reset_status() to get the MultiPhaseSiInit API return status if FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN is enabled. Ideally FSP API should be able to return the status (both success and error code) upon exiting the FSP API but unfortunately there are some scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return any ERROR status. Hence, this function can be considered as an additional hook to read the FSP reset status by reading the dedicated HOB without relying on the FSP API exit status code. Any SoC platform that selects the FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN config will call into this newly added API to get the FSP return status from MultiPhaseSiInit. BUG=b:278665768 TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC code and call into this API to know the return status from MultiPhaseSiInit FSP API. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I749c9986e17e4cbab333b29425c9a4a4ba4128fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/74784 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
2023-05-02soc/intel/common: Introduce API to get the FSP Reset StatusSubrata Banik
This patch creates a function to read the FSP API Reset Status. This function relies on the FSP Scheduled Reset HOB which holds the reset type (warm/cold/shutdown) information along with any platform specific reset need (like global reset). Ideally FSP API should be able to return the status (both success and error code) upon exiting the FSP API but unfortunately there are some scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return any ERROR status. Hence, this function provides an additional hook to read the FSP reset status by reading the dedicated HOB without relying on the FSP API exit status code. Additionally, create FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN config option to handle broken FSP API return status issue. Any SoC platform that selects the `FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN` config will call into this newly added API to get the FSP return status from MultiPhaseSiInit. BUG=b:278665768 TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC code and call into this API to know the return status from MultiPhaseSiInit FSP API. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ief5d79736cc11a0a31ca2889128285795f8b5aae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-28treewide: Add missing include guards to chip.hJan Samek
Some of the chip.h files in the tree are missing the include guards. This patch adds them in order to avoid potential redefinions of symbols contained in these headers, when they are included multiple times in static.c generated by sconfig. Change-Id: I550a514e72a8dd4db602e7ceffccd81aa36446e3 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-27drivers/intel/fsp2_0: Inject newline after printing EFI GUIDSubrata Banik
TEST=fsp_print_guid() output doesn't get cobbled with other serial output and now separated by a newline character. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d47dbc5d493f86f14a1bbcf9cb5c16c0e12b841 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74781 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21drivers/intel/ish: Hook get ISH version into `.final`Subrata Banik
This patch creates .final hook to call into get ISH version function if platform has required config (`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support. BUG=b:273661726 TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12Reland "drivers/intel/dptf: Add multiple fan support under dptf"Sumeet Pawnikar
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e. Add multiple fan support for dptf policies. This also fixes the Google Meet resolution drop issue as per b:246535768 comment#12. When system starts Google Meet video call, it uses the hardware accelerated encoder as expected. But, as soon as another system connects to the call, an immediate fallback is observed from hardware to software encoder. Due to this, Google Meet resolution dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC based fanless platforms. This same issue was not seen on fan based systems. With the fix in dptf driver where fan configures appropriate setting for only fan participant, not for other device participants, able to see consistent 720p resolution. BUG=b:246535768,b:235254828 BRANCH=None TEST=Built and tested on Alder Lake-P Redrix system for two fans support and on Alder Lake-N fanless systems. With this code change Google Meet resolution drop not observed. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-11drivers/fsp2_0/mp_service_ppi: Use struct device to fill in bufferArthur Heymans
Now the CPU topology is filled in struct device during mp_init. Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-30drivers/intel/fsp2_0/hand_off_block: use cb_err in fsp_find_range_hobFelix Held
Use enum cb_err as return value of fsp_find_range_hob instead of using the raw -1 and 0 values. Also update the call sites accordingly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id6c9f69a886f53868f1ef543c8fa04be95381f53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-29drivers/intel/fsp2_0: Add API to find FSP resource HOB by GUIDPratikkumar Prajapati
The API finds the FSP resource HOB for the given GUID. Returns the pointer to the HOB if found, otherwise NULL Change-Id: I4ebc9b7d214e5fc731ae45f28e7f5732a7635cbc Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-03-23soc/intel: Rename IA common code module from `TOM` to `RAMTOP`Subrata Banik
This patch renames all references of `top_of_ram` (TOM) in IA common `basecode` module (for example: functions, variables, Kconfig, Makefile and comments) with `ramtop` aka top_of_ram to make it more meaningful and to avoid conflicts with Intel SA chipset TOM registers. BUG=Able to build and boot google/rex with the same ~49ms savings in place. Change-Id: Icfe6300a8e4c5761064537fb256cfecbe2afb2d8 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73881 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-22drivers/intel/fsp2_0: Add support for FSP_ERROR_INFO_HOBRay Han Lim, Ng
Add a new Kconfig CONFIG_ENABLE_FSP_ERROR_INFO option to enable retrieval of FSP_ERROR_INFO_HOB from HobList created by FSP. Such a HOB could be generated by Intel SPR-SP FSP. This HOB data is defined in Intel®Firmware Support Package External Architecture Specification v2.1 Doc#611786-2.1. Change-Id: I812d1c22c1bbe5146630948ca6ca12c46ffd5504 Signed-off-by: Ray Han Lim, Ng <ray.han.lim.ng@intel.com> Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-13drivers/intel/fsp2_0: Have provision for caching TOM regionSubrata Banik
This patch enables early caching of TOM region to optimize the boot time if valid mrc cache is found (i.e. except the first boot after flashing/updating few AP firmware image). TEST=Able to build and boot google/rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-07drivers/intel/fsp2_0: Print `mrc_cache` size in decimalSubrata Banik
This patch updates the print msg of mrc_cache size from hex to decimal for easier understanding while debugging the issue. TEST=Able to build and boot google/rex. Without this patch: [SPEW ] MRC cache found, size ee75 With this patch: [SPEW ] MRC cache found, size 61045 bytes Change-Id: I69feeb36423e47a5992c9f27d9a7042803a492cd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2023-02-10drivers/fsp2: Don't print garbage if the FSP signature doesn't matchFred Reitberger
Using a &uint64_t as a string argument does not include the required NULL character termination. Update the format string to only print the 8 desired characters and not continue printing stack memory until a NULL is found. Before: [EMERG] Invalid UPD signature! FSP provided "AMD_01_M;....`", expected was "CEZANE_MAMD_01_M;....`". After: [EMERG] Invalid UPD signature! FSP provided "AMD_01_M", expected was "CEZANE_M". Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ib334daa8518a92e0cf3d22c4d95908f4c84afe04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72911 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07src: Move POST_BOOTBLOCK_CAR to common postcodes and use itMartin Roth
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific postcodes into the common postcode list, and uses it for the cache-as-RAM init as needed. Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in most of the others, the values were consolidated into 0x21. This will change the value on some platforms. Any conflicts should get sorted out later in the conversion process. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8527334e679a23006b77a5645f919aea76dd4926 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-01treewide: Remove duplicated include <device/pci.h>Elyes Haouas
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>. Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-31drivers/intel/fsp2_0: Simplify check for CONFIG_SAVE_MRC_AFTER_FSPSDavid Hendricks
This uses a simpler form of #if to check if CONFIG_SAVE_MRC_AFTER_FSPS is enabled, referencing the Kconfig variable only once and defaulting to the original behavior if not. Change-Id: I4711c1474d9a3a5c685dd31561619c568fab075c Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72587 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-29drivers/intel/fsp2_0: Add saving MRC data after FSP-S optionJohnny Lin
When Kconfig SAVE_MRC_AFTER_FSPS is selected, save MRC training data after FSP-S instead of FSP-M. For now only SPR-SP server FSP supports this. This issue surfaces with SPR-SP, because of the memory type (DDR5 support) and memory capacity (more memory controllers, bigger DRAM capacity). Therefore Intel decided to save MRC training data after FSP-S with SPR-SP FSP. Change-Id: I3bab0c5004e717e842b484c89187e8c0b9c2b3eb Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71950 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-26soc/intel/alderlake: Wait for panel power cycle to completeJeremy Compostella
The Alder Lake PEIM graphics driver executed as part of the FSP does not wait for the panel power cycle to complete before it initializes communication with the display. It can result in AUX channel communication time out and PEIM graphics driver failing to bring up graphics. If we have performed some graphics operation in romstage, it is possible that a panel power cycle is still in progress. To prevent any issue with the PEIM graphics driver it is preferable to ensure that panel power cycle is complete. This patch replaces commit ba2cef5b5493 ("soc/intel/common/block/early_graphics: Introduce a 200 ms delay") workaround patch. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Developer screen is visible in the recovery flow Change-Id: Iadd6c9552b184f7d6ec8df9d0d392634864ba50b Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72419 Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-26drivers/intel/gma: Use libgfxinit Update_Output to turn off graphicsJeremy Compostella
We were using the libgfxinit `Initialize' function with the `Clean_State' parameter because the more appropriate `Update_Output' function was not performing all the necessary clean up operations for the PEIM driver to be successful when libgfxinit was used in romstage. Thanks to a lot of experiments and some log analysis efforts, we were able to identify the missing operation and fix the `Update_Output' function (cf. https://review.coreboot.org/c/libgfxinit/+/72123). The `initialized' global variable is now unnecessary as we track the initialization in the Ada code instead. Since the `Update_Output' function does not return any value, this patch modifies the `gma_gfxstop' prototype accordingly. This does not have any impact as the return value was not used anyway. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Developer screen is visible Change-Id: I53d6fadf65dc09bd984de96edb4c1f15b64aeed0 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72125 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-26drivers/intel/gma: Dump output setting only if DEBUG_ADA_CODE is setJeremy Compostella
This patch restricts the dump of the vebose graphics output settings to configuration with the `DEBUG_ADA_CODE' flag set. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Configuration dump is seen only if DEBUG_ADA_CODE is set Change-Id: Iadd6c9552b184f7d6ec8df9d0d392634864ba50c Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72418 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-20drivers/intel/gma/hires_fb/gma-gfx_init.adb: Remove spaces before tabsElyes Haouas
Change-Id: Ifab3fcd2de8f0c1672d1a9a21c8e0c5dba5b7443 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72077 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-20drivers/intel/gma/text_fb/gma-gfx_init.adb: Remove spaces before tabsElyes Haouas
Change-Id: I421602c81d9a186eb36a289d6e5048b5aa343a2d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-14drivers/intel/i210/Makefile.inc: Fix "No such file or directory" errorElyes Haouas
Fix: cc1: error: src/drivers/intel/i210: No such file or directory [-Werror=missing-include-dirs] Change-Id: I94b0f99353ed3a582ea590cbc6b12dec6294c75d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-13drivers/intel/i210.h: Remove 'extern' from declarationArthur Heymans
"extern" is always implied with function declarations. Also remove the comment as the linker will just tell you the same if a definition is missing. Change-Id: I53679ab57981790f82affb46a006281b348af574 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71869 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-12drivers/intel/gma: Enable Alder Lake libgfxinit supportJeremy Compostella
This CL requires the following libgfxinit patches: - https://review.coreboot.org/c/libgfxinit/+/65087 - https://review.coreboot.org/c/libgfxinit/+/65178 - https://review.coreboot.org/c/libgfxinit/+/67489 - https://review.coreboot.org/c/libgfxinit/+/65140 - https://review.coreboot.org/c/libgfxinit/+/67490 - https://review.coreboot.org/c/libgfxinit/+/67491 - https://review.coreboot.org/c/libgfxinit/+/67492 - https://review.coreboot.org/c/libgfxinit/+/67493 - https://review.coreboot.org/c/libgfxinit/+/67494 - https://review.coreboot.org/c/libgfxinit/+/67495 - https://review.coreboot.org/c/libgfxinit/+/67496 - https://review.coreboot.org/c/libgfxinit/+/67497 - https://review.coreboot.org/c/libgfxinit/+/67498 - https://review.coreboot.org/c/libgfxinit/+/67499 - https://review.coreboot.org/c/libgfxinit/+/67500 - https://review.coreboot.org/c/libgfxinit/+/67800 - https://review.coreboot.org/c/libgfxinit/+/67801 - https://review.coreboot.org/c/libgfxinit/+/67802 - https://review.coreboot.org/c/libgfxinit/+/69341 BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=libgfxinit is compiled with the Alder Lake configuration Change-Id: I2de94556f8105447788aaa02340ad669fb68ca0c Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70301 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Zhixing Ma <zhixing.ma@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-12soc/intel/common/block: Add Intel VGA early graphics supportJeremy Compostella
This patch introduces an early graphics driver which can be used in romstage in cache-as-ram mode. The implementation relies on `libgfxinit' and provide VGA text mode support. SoCs wanting to take advantage of this driver must implement the `early_graphics_soc_panel_init' function to set the panel power sequence timing parameters. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=Graphics bring up observed on skolas with extra patches Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11drivers/intel/gma: Hook up libgfxinit in romstageJeremy Compostella
A mainboard port needs to: - select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT' - implement the Ada package `GMA.Mainboard' with a single function `ports' that returns a list of ports to be probed for displays. - set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use in romstage (and ramstage) for the graphic device. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=libgfxinit compiles in romstage. libgfxinit successfully executes in romstage and ramstage using the requested MMIO setting on skolas. Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27tree/acpi: Replace constant "Zero" with actual numberFelix Singer
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27drivers/intel/ish: Add ADL-P ISH DIDSubrata Banik
This patch adds ISH ID for ADL-P to ensure dynamic ASL code is added into SSDT. With this patch: Scope (\_SB.PCI0.ISHB) { Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"), Package (0x01) { Package (0x02) { "DmaProperty", One } } }) } Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I48dc6056155824239bb88eda2b0ff5bcd36ced15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71262 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyle Lin <kylelinck@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-12-23soc/intel: Drop SoC specific DPTF implementationSubrata Banik
This patch drops the SoC specific implementation as DPTF driver can now fillin those platform specific data using SoC specific macros. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: If65976f15374ba2410b537b1646ce466ba02969b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-23drivers/intel/dptf: Implement API to fill DPTF platform infoSubrata Banik
This patch fills in a generic platform info structure based on the inputs from the SoC dptf header file (soc/dptf.h). It will help to make things common and drop unnecessary back and forth call between common code and SoC code. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3521882495485cef686655abd65337515bae5faa Reviewed-on: https://review.coreboot.org/c/coreboot/+/71111 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23tree: Replace And(a,b) with ASL 2.0 syntaxFelix Singer
Replace `And (a, b)` with `a & b`. Change-Id: Id8bbd1a477e6286bbcb5fa31afd1c7a860b1c7dc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70851 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23tree: Replace And(a,b,c) with ASL 2.0 syntaxFelix Singer
Replace `And (a, b, c)` with `c = a & b`, respectively `c &= b` where possible. Change-Id: Ie558f9d0b597c56ca3b31498edb68de8877d3a2f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70850 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22drivers/intel/fsp2_0: Don't include <commonlib/bsd/compiler.h>Elyes Haouas
<commonlib/bsd/compiler.h> is automatically included in all compilation units by the build system. (see Documentation/contributing/coding_style.md) Change-Id: I09ed0c5eb2054c3add026f200c0fd3f609f73197 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67905 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22drivers/intel/dptf: Add new config for EISA HID supportSubrata Banik
This patch adds config to let SoC users (config) to choose if EISA HID is supported. All SoC config would like to support EISA HID need to select `HAVE_DPTF_EISA_HID` config. Prior to Tiger Lake, all DPTF devices used 7-character EISA IDs. If selected, the 7-character _HIDs will be emitted, otherwise, it will use the "new" style, which are regular 8-character _HIDs. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6bf64f74c447b28665d31a64181c33df882d5d06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71108 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-22drivers/intel/dptf: Add `soc_` prefix for `get_dptf_platform_info()`Subrata Banik
This patch makes the SoC specific callback code more readable by adding `soc_` prefix into the `get_dptf_platform_info()`. In nutshell this patch renames `get_dptf_platform_info()` to `soc_get_dptf_platform_info()`. TEST=Able to build Google/Rex without any compilation issue. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I27d6a146d5928e1742f82f85f51ad42656f46344 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-12-19tree: Replace Or(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Or (a, b)` with `a | b`. Change-Id: I73842cd4843ebb0b48440059ae9dcf6c82235a76 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70845 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-19drivers/intel/fsp2_0: Implement `mps2_noop_get_number_of_processors()`Subrata Banik
This patch implements mps2_noop_get_number_of_processors() API with minimal information required for Intel MTL FSP to utilise the `MP_SERVICES_PPI_V2_NOOP` config. The major difference between Intel ADL and MTL FSP in terms of doing CPU feature programming aka utilizing MP PPI wrapper code is that, starting with MTL, FSP has dropped the `SkipMpInit` UPD. It means now, coreboot doesn't have any way to skip FSP doing MP Init operation. But during ADL, coreboot had introduced the MP_SERVICES_PPI_V2_NOOP config that is used to skip FSP about actually running any CPU feature programming on APs. The idea is to use the same config even in MTL to provide only the must have information (to bypass any assert in FSP during debug image) to FSP. Passing `FSP_UNSUPPORTED` from mps2_noop_get_number_of_processors() results in `assert` while compiling FSP in debug mode hence, implementing the function to pass only the information about BSP being the active processor along with passing `FSP_SUCCESS` (eventually it makes FSP happy and doesn't run into any issue in debug and/or release mode). TEST=Able to build and boot Google/Rex and Google/Kano while coreboot skip calling into FSP for doing MP init. Change-Id: I75d7e151699782210e86be564b0055d572cacc3f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70555 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-14drivers/intel/gma/acpi: Replace Store(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Store (a, b)` with `b = a`. Change-Id: Ifd3a814228df6a399fe1110abf5b5bc18e6fd6d2 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-13drivers/intel/ish: Allow adding DmaProperty to _DSDReka Norman
On nissa, the ISH is running closed source firmware, so the ChromeOS security requirements specify it must be behind an IOMMU. Allow adding DmaProperty to the _DSD of the ISH device. This will result in the kernel marking the device as untrusted. BUG=b:249846505 TEST=Check SSDT is correct, and kernel detects the DmaProperty and firmware-name properties. SSDT entry on yaviks with both add_acpi_dma_property and firmware_name set in devictree: Scope (\_SB.PCI0.ISHB) { Name (_DSD, Package (0x04) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "firmware-name", "adl_ish_lite.bin" } }, ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"), Package (0x01) { Package (0x02) { "DmaProperty", One } } }) } Change-Id: Ie1539fc757e72e995e98c3ecf83e705e3bede8c0 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-12-12{drivers,superio}/acpi: Replace ShiftRight(a,b) with ASL 2.0 syntaxFelix Singer
Replace `ShiftRight (a, b)` with `a >> b`. Change-Id: I0751d00186e8dff38e02e7bf7d8ebf5a17514a58 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
<device/mmio.h>` chain-include `<arch/mmio.h>: https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes Also sort includes while on it. Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-06drivers/intel/fsp2_0: Update MRC cache in ramstageReka Norman
Currently the MRC cache is updated in romstage, immediately after returning from FSP-M. Since cbmem is not cached in romstage, the update is slow (~6 ms on nissa). Specifically, the new MRC data returned by the FSP is stored in the FSP reserved memory in cbmem, so hashing the new data is slow. Move the MRC cache update to ramstage, where cbmem is cached. On nissa, this saves ~5 ms of boot time. Before: 552:finished loading ChromeOS VPD (RW) 631,667 (16) 3:after RAM initialization 637,703 (6,036) 4:end of romstage 650,307 (12,603) After: 552:finished loading ChromeOS VPD (RW) 631,832 (15) 3:after RAM initialization 633,002 (1,169) 4:end of romstage 645,582 (12,580) In ramstage, save_mrc_data() takes ~138 us. BUG=b:242667207 TEST=MRC caching still works as expected on nivviks - after clearing the MRC cache, memory is retrained on the next boot, but cached data is used on subsequent boots. Change-Id: Ie6aa2dee83a3ab8913830746593935d36a034b8d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-11-30/: Remove extra space after commaElyes Haouas
Change-Id: Ic64625bdaf8c4e9f8a5c1c22cece7f4070012da7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69903 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-29Revert "src/arch/x86: Use core apic id to get cpu_index()"Arthur Heymans
This reverts commit 095c931cf12924da9011b47aa64f4a6f11d89f13. Previously cpu_info() was implemented with a struct on top of an aligned stack. As FSP changed the stack value cpu_info() could not be used in FSP context (which PPI is). Now cpu_info() uses GDT segments, which FSP does not touch so it can be used. This also exports cpu_infos from cpu.c as it's a convenient way to get the struct device * for a certain index. TESTED on aldrvp: FSP-S works and is able to run code on APs. Change-Id: I3a40156ba275b572d7d1913d8c17c24b4c8f6d78 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69509 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-25drivers/intel/mipi_camera: Remove IPU ES support entry for RPLjimlai
The current IPU ES entry value is always set to true for RPL and kernel picks the ES version of the main IPU FW even for the production bootloader but loading is not successful due to the authentication failure. On Raptor Lake silicon, the production binaries are backward compatible with ES parts. This change removes the IPU ES support ACPI entry since the kernel needs to load the production IPU main firmware on both the ES/QS parts. BUG=b:258125833 TEST=Verify the Camera functionality by enabling the IPU secure mode on RPL variants with both ES/QS silicon. Signed-off-by: Jim Lai <jim.lai@intel.com> Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-22src/drivers: Remove unnecessary space after castsElyes Haouas
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18cbmem_top_chipset: Change the return value to uintptr_tElyes Haouas
Get rid of a lot of casts. Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-11-16drivers/intel/fsp2_0: add log level parameter to fsp_print_guidFelix Held
Not all functions that call fsp_print_guid print their output with the BIOS_SPEW log level, so introduce a new log level parameter so that the caller of fsp_print_guid can specify which log level fsp_print_guid should use for printing the GUID. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3b37afe703f506d4913f95a954368c0eec0f862d Reviewed-on: https://review.coreboot.org/c/coreboot/+/69599 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-14drv/intel/fsp2_0/hand_off_block: rework fsp_find_extension_hob_by_guidFelix Held
Use the new fsp_hob_iterator_get_next_guid_extension function in fsp_find_extension_hob_by_guid instead of iterating through the HOB list in this function. TEST=AMD_FSP_DMI_HOB is still found and the same type 17 DMI info is printed on the console. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4d4ce14c8a5494763de3f65ed049f98a768c40a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-14drivers/intel/fsp2_0/hand_off_block: use iterator in fsp_find_range_hobFelix Held
Drop the find_resource_hob_by_guid implementation and use the new fsp_hob_iterator_init and fsp_hob_iterator_get_next_guid_resource functions in fsp_find_range_hob. TEST=Mandolin still finds the TSEG range HOB and uses the correct TSEG location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I00786cbeea203fba195ddc953c3242be544a7d70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-14drivers/intel/fsp2_0/hand_off_block: add functions to iterate over HOBsFelix Held
Introduce iterator function to go through the HOBs that will be used in follow-up commits both from the rest of the common FSP HOB access code and from SoC-specific code that needs to access specific HOBs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If86dde2a9f41d0ca7941493a92f11b91a77e2ae0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-11drivers/intel/fsp2_0/hand_off_block: remove unneeded line breaksFelix Held
Since the characters per line limit was increased from 80 to 96, some line breaks can be removed to improve code readability. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-07drivers/intel/fsp2_0/memory_init.c: clean codeMaximilian Brune
No need to call a function that just instantly returns. It greatly enhances readability to just check before calling a funtion and it also removes an extra argument. Change-Id: I4d57c45ede520160ef615725c023b7e92289a995 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-03{device,drivers}: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I1727bf56b4090d040aab413006dec7aca0587d44 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-10-26src/drivers: Clean up includesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ia40678019b2a54deb246dbfbf33ec37a8c3839e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-10-20Revert "drivers/intel/dptf: Add multiple fan support under dptf"Sumeet Pawnikar
This reverts commit 672bd9bee5c0045694ef20fe3e2f7a003bef0edd. Reason for revert: Gmeet resolution dropped. When system starts Gmeet video call, it uses the hardware accelerated encoder as per the expectation. But, as soon as another system connects to the call, the immediate fallback observed from hardware to software encoder. Due to this, Gmeet resolution dropped from 720p to 180p. Currently, this issue observed on AlderLake-N SoC based fanless platforms. This issue is not seen on fan based systems. BUG=b:246535768,b:235254828 BRANCH=None TEST=Built and tested on Alderlake-N systems. With this revert Gmeet resolution drop not observed. Change-Id: Idaeaeaed47be44166a7cba9a0a1fac50d2688e50 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2022-10-11mb/google/brya/nivviks: Enable ISH driver and firmware nameMeera Ravindranath
BRANCH=none BUG=b:234776154 TEST=build and boot Nirwen UFS, copy ISH firmware to host file system /lib/firmware/intel/adln_ish.bin check "dmesg |grep ish", it should show: ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-09-27drivers/intel/mipi_camera: Remove IPU ES support entry for ADL-NV Sowmya
The current IPU ES entry value is always set to true for ADL-N and kernel picks the ES version of the main IPU FW even for the production bootloader but loading is not successful due to the authentication failure. Alderlake-N silicon has the same CPU id for all the SKU's and also the production binaries are backward compatible with ES parts. This change removes the IPU ES support ACPI entry since the kernel needs to load the production IPU main firmware on both the ES/QS parts. BUG=b:248249032 TEST=Verify the Camera functionality by enabling the IPU secure mode on ADL-N variants with both ES/QS silicon. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I75b222e6f2b1ccdc5b6c448eb60afff3c1da3a8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-09-12drivers/intel/ptt: Use the correct detection methodMichał Żygowski
On some platforms the HFSTS4 bit 19 does not indicate active PTT. Instead of ME HFSTS4, use TXT FTIF register to check active TPM for the current boot. Discrete TPM shall be deactivated when PTT is enabled so this always should return true value of PTT state. Leave the old method for backwards compatibility if TXT FTIF would not be applicable for older microarchitectures. Based on DOC #560297. TEST=Check if PTT is detected as active on MSI PRO Z690-A DDR4 WIFI Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3a55c9f38f5bb94fb1186592446a28e675c1207c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-09-08drivers/intel/fsp2_0: Fix location of timestamp for loading FSP-SReka Norman
Currently, the "loading FSP-S" timestamp is added in fsp_silicon_init(). However, most Intel platforms actually load FSP-S earlier than this, in soc_fsp_load(). So the timestamp is added in the wrong place. Add the timestamp in fsps_load() instead, after the load_done early return so that it will only be added for the first call. Before: 949:finished CSE firmware sync 961,833 (17,998) 17:starting LZ4 decompress (ignore for x86) 1,018,328 (56,495) 18:finished LZ4 decompress (ignore for x86) 1,018,797 (469) 30:device enumeration 1,035,096 (16,298) 971:loading FSP-S 1,048,082 (12,986) 954:calling FspSiliconInit 1,049,331 (1,249) After: 949:finished CSE firmware sync 959,355 (16,370) 971:loading FSP-S 978,139 (18,784) 17:starting LZ4 decompress (ignore for x86) 1,015,796 (37,656) 18:finished LZ4 decompress (ignore for x86) 1,016,271 (475) 30:device enumeration 1,032,567 (16,295) 954:calling FspSiliconInit 1,046,867 (14,300) BUG=b:239769975 TEST="loading FSP-S" is added in the right place on nivviks (see above). Change-Id: Ib26cf96ae97766333fe75ae44381d4f7c6cc7b61 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-04drivers/intel/dptf: Add multiple fan support under dptfSumeet Pawnikar
Add multiple fan support for dptf policies BUG=b:235254828 BRANCH=None TEST=Built and tested on Redrix system for two fans Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-24drivers: Implement EFI_PEI_MP_SERVICES_PPI with FSP_UNSUPPORTED typeSubrata Banik
This patch implements EFI_PEI_MP_SERVICES_PPI structure definitions with APIs that return mp_api_unsupported(). The reason behind this change is to fix an FSP issue where FSP assumes ownership of the APs (Application Processors) upon passing a `NULL` pointer to the CpuMpPpi FSP-S UPD.Hence, this patch implements `MP_SERVICES_PPI_DEFAULT` config to fill EFI_PEI_MP_SERVICES_PPI with `mp_api_unsupported` APIs. Later this data structure can be passed to the CpuMpPpi UPD to avoid APs from getting hijacked by FSP while coreboot decides to set SkipMpInit UPD. TEST=Able to build and boot Google/Taeko with this patch. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I31fcaa2aa633071b6d6bfa05dbe891ef87978d2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-13payloads/tianocore: Rename TianoCore to edk2Sean Rhodes
coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-11drivers: Add SPDX identifiers to files missing themMartin Roth
This adds SPDX identifiers to the remaining source files in the drivers directory that don't already have them. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: I97f96de857515214069c3b77f3c781f7f0555c6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66499 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-17src/drivers/intel/i210: Remove unuseful 'return' in void functionElyes HAOUAS
Change-Id: Id33ef66e7388df2173ee8888265ed4379f05a93e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-17drivers: Get rid of unnecessary blank lines {before,after} braceElyes HAOUAS
Change-Id: Ic1b38e93d919c1286a8d130700a4a2bfd6b55258 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-16drivers/intel/dptf: Correct UID for TBAT deviceVarshit B Pandya
As per Intel Dynamic Tuning Spec revision 1.3.13, section 14.1.2 TBAT _UID should match the _UID implemented for battery device ACPI object for OS _UID for TBAT is currently set to "TBAT" but should be 1. Battery device is define at src/ec/google/chromeec/acpi/battery.asl Setting _UID to 1 because right now ChromeOS is the only user of DPTF driver TEST: Build and boot brya0 Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I1e4474e59cf01f937fbd51e5b674a609f0c47625 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-09*/fsp/exit_car: Push stack address into %espArthur Heymans
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution") Resolves: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/ thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/ Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/ thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/ 5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing the value at '_estack' into %esp rather than the address '_estack'. Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-04treewide: Unify Google brandingJon Murphy
Branding changes to unify and update Chrome OS to ChromeOS (removing the space). This CL also includes changing Chromium OS to ChromiumOS as well. BUG=None TEST=N/A Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-04src/driver/intel/mipi_camera: Update ACPI entry to provide silicon infozhixingma
CPUID_RAPTORLAKE_P_Q0 is ES. Add it to generate is_es = 1 in ACPI BUG=b:229134437 BRANCH=firmware-brya-14505.B TEST=Booted to OS on adlrvp + rpl silicon Signed-off-by: zhixingma <zhixing.ma@intel.com> Change-Id: I67d70dc7e916a4818869aef86e7e642b66ea5dae Reviewed-on: https://review.coreboot.org/c/coreboot/+/65118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-09drivers/intel/gma/acpi: Replace LNotEqual(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LNotEqual(a, b)` with `a != b`. Change-Id: Ib1b3f85f95511e903948b385e86e5102d5b43add Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-09drivers/intel/gma/acpi: Replace LGreater(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LGreater(a, b)` with `a > b`. Change-Id: I56479726f91f33e1d3062a31f1efb82c0814316c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-09drivers/intel/gma/acpi: Replace LLess(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LLess(a, b)` with `a < b`. Change-Id: I043ffad90737f4217d01c49e03af81549a0ffb1b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-09drivers/intel/gma/acpi: Replace LEqual(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LEqual(a, b)` with `a == b`. Change-Id: I965a0718f6bca1dc27b928bdd9374857f5ea3215 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-07Replace some ENV_ROMSTAGE with ENV_RAMINITKyösti Mälkki
With a combined bootblock+romstage ENV_ROMSTAGE might no longer evaluate true. Change-Id: I733cf4e4ab177e35cd260318556ece1e73d082dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63376 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-06-01driver/intel/fsp2_0: Disable NULL deref code when calling FSPArthur Heymans
FSP needs interrupts disable so also disable generating exceptions around debug registers. Change-Id: Ia49dde68d45b71e231aaf32a0e6fd847f0e06146 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64426 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-20CBMEM: Change declarations for initialization hooksKyösti Mälkki
There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-05-19drivers/intel/fsp2_0: Avoid hardcoding `log_level` for FSP debug handlerSubrata Banik
This patch fixes a potential corner case scenario where the value of CONFIG_DEFAULT_CONSOLE_LOGLEVEL is less than `BIOS_SPEW` hence, coreboot is unable to redirect FSP serial messages over UART. Rather than passing hard coded `BIOS_SPEW` for the FSP debug handler, this patch now calls get_log_level() function to pass the supported log level while printing FSP serial msg. BUG=b:225544587 TEST=Able to build and boot taeko. Also, able to see FSP debug log with CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8a18101f5c3004252205387bde28590c72e05b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64460 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 20:30:44 +0000