aboutsummaryrefslogtreecommitdiff
path: root/src/drivers/intel
AgeCommit message (Collapse)Author
2024-02-14tree; Remove unused <lib.h>Elyes Haouas
Change-Id: Ifa5c89aad7d0538c556665f8b4372e44cf593822 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80433 Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-05drivers/intel/fsp2_0: Remove unused function fsp_write_lineJeremy Compostella
This is just a clean-up commit. Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec97 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-02-02lib: Move IP checksum to commonlibJulius Werner
This patch moves the IP checksum algorithm into commonlib to prepare for it being shared with libpayload. The current implementation is ancient and pretty hard to read (and does some unnecessary questionable things like the type-punning stuff which leads to suboptimal code generation), so this reimplements it from scratch (that also helps with the licensing). This algorithm is prepared to take in a pre-calculated "wide" checksum in a machine-register-sized data type which is then narrowed down to 16 bits (see RFC 1071 for why that's valid). This isn't used yet (and the code will get optimized out), but will be used later in this patch series for architecture-specific optimization. Change-Id: Ic04c714c00439a17fc04a8a6e730cc2aa19b8e68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80251 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-02-02drivers/intel/gma: Add missing parentheses to brightness ACPIJonathon Hall
Commit d25277666829 ("tree: Replace And(a,b) with ASL 2.0 syntax") replaced two instances of `And(var, mask) == 0` with `var & mask == 0`. This expression needs parentheses - `(var & mask) == 0`. Without parentheses, it is always false, since the masks are nonzero (`var & (mask == 0)`; `var & 0`; `0`). This caused brightness changes on Intel GMA to take longer than normal since the status was never checked. The brightness would change immediately, but another brightness change could not occur until the first change timed out. This was most noticeable in KDE, which waits for the brightness change to complete before accepting another brightness up/down keypress. Tapping brightness up/down repeatedly would take much longer to reach max/min brightness due to many presses being ignored. It is noticeable in GNOME as well but less obvious. Tapping brightness up/down repeatedly would handle all keypresses, but the display's actual brightness would lag behind and skip some intermediate steps. I tested both Librem 13v2 and Librem 14, as far as I know this would apply to all systems configuring brightness with Intel GMA. Test: Verify brightness keys respond quickly again on Librem 13v2 / 14. Change-Id: I57895e8c654c83368b452d7adfe1856c0a0341fb Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80260 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-01-31device/device.h: Rename busses for clarityArthur Heymans
This renames bus to upstream and link_list to downstream. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-31include/device/device.h: Remove CHIP_NAME() macroNicholas Sudsgaard
Macros can be confusing on their own; hiding commas make things worse. This can sometimes be downright misleading. A "good" example would be the code in soc/intel/xeon_sp/spr/chip.c: CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev, This appears as CHIP_NAME() being some struct when in fact these are defining 2 separate members of the same struct. It was decided to remove this macro altogether, as it does not do anything special and incurs a maintenance burden. Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-01-26soc/intel/common: Add lunarlake device IDsAppukuttan V K
Added Lunar Lake device IDs the device specific functions Reference: Lunar Lake External Design Specification Volume 1 (734362) Change-Id: Id31d567287b9921d60909b1eb617c7cfaf6672c9 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2024-01-24driver/intel to /driver/ocp: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id47a5ef3c53f767d1e03c788e0022d05b21f5c28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80079 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2024-01-11vc/google: Show different logos for different ChromeOS devicesShelley Chen
This commit adds support for showing different logos on the ChromeOS firmware splash screen based on the device model (between Chromebook-Plus and regular ChromeOS devices like Chromebook and Chromebox). This allows OEMs to customize the branding on their devices. This patch also introduces three new Kconfigs: - CHROMEOS_FW_SPLASH_SCREEN - CHROMEOS_LOGO_PATH - CHROMEBOOK_PLUS_LOGO_PATH which allow users to enable the fw splash screen feature in the vendorcode. Previously, we were using the BMP_LOGO Kconfig in drivers/intel/fsp2_0, but we didn't want the top level Kconfigs to be located inside the architecture specific files. BUG=b:317880956 BRANCH=None TEST=emerge-rex coreboot chromeos-bootimage verify that FW splash screen appears Change-Id: I56613d1e7e81e25b31ad034edae0f716c94c4960 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79775 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-12-26drivers/intel/gma: Only show the choice when a VBT is to be addedArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I3bb71da8ea47f7365ae3895f5477f2a765256e3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/79667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-12-26drivers/intel/fsp2_0: Add boot mode stringsMarx Wang
The FSP boot mode showing in serial log is a magic number. In order to let user understand its meaning directly, add the strings to describe the modes. TEST=build, boot the device and check the logs: without this change, the log is like: [SPEW ] bootmode is set to: 2 with this change: [SPEW ] bootmode is set to: 2 (boot assuming no config change) Change-Id: I49a409edcde7f6ccb95eafb0b250f86329817cba Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-12-22drivers/intel/fsp2_0: Log FW Splash Screen feature stateSubrata Banik
This patch implements debug logging to aid debugging and analysis of Firmware Splash Screen feature behavior. BUG=b:284799726 BRANCH=firmware-rex-15709.B TEST=Able to build and boot google/screebo and check the FW splash screen state. [DEBUG] Firmware Splash Screen : Enabled Change-Id: I1ec7badf620e8dbe3d48674d93d640161de6a830 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paz Zcharya <pazz@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-12-20treewide: Use show_notices target for warningsMartin Roth
This updates all warnings currently being printed under the files_added and build_complete targets to the show_notices target. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823 Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-02drivers/intel/gma/opregion: Use CBFS cache to load VBTJeremy Compostella
Thanks to x86 CBFS cache support, we can leverage cbfs_map() function to load the VBT binary regardless of if it is compressed or not. Change-Id: I1e37e718a71bd85b0d7dee1efc4c0391798f16f7 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-10-26drivers/intel/gma/Kconfig: Add VBT compression configuration entryJeremy Compostella
Introduce Kconfig choice to pick between lzma, lz4 and no compression at all of the VBT binary. If VBT is needed in romstage, it can be used to set VBT lz4 compression as an alternative to enabling lzma compression support. Indeed, the extra lzma code needed to de-compress VBT undermines the compression size reduction between lzma and lz4. BUG=b:279173035 TEST=Verified that vbt.bin is lz4 compressed with VBT_CBFS_COMPRESSION_LZ4 and not compressed at all with VBT_CBFS_COMPRESSION_NONE Change-Id: I1df6a96c2ec122f0ef8ee6a1e96ffbd621b14941 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-20drivers/intel/fsp2_0: Support embedding a second FSP-M/FSP-SJonathon Hall
Support embedding a second FSP-M/FSP-S binary for an SoC that can select one at runtime. Comet Lake v1 and v2 are different steppings of the same SKUs, but they require different FSP binaries. Supporting both in a single build requires embedding both FSPs and selecting one at runtime based on the CPUID. This is desirable for a product that may have different CPU steppings but is not otherwise differentiated enough for a separate firmware build. An SoC can select PLATFORM_USES_SECOND_FSP to indicate that two FSP-M/ FSP-S binaries are required. Implement soc_select_fsp_m_cbfs() and soc_select_fsp_s_cbfs() to choose one based on platform-specific criteria. For Comet Lake, the first FSP is CML v1 and the second is CML v2, but in principle a platform could define any meaning for the first and second FSP. FSP-T is not affected, only one FSP-T can be embedded if FSP_CAR is used. Only one set of FSP headers is used, which is sufficient for Comet Lake v1/v2; their headers are equivalent. ADD_FSP_BINARIES, FSP_USE_REPO, and FSP_FULL_FD are supported for both sets of FSP-S/FSP-M but cannot be configured separately, both use the same configuration. Change-Id: Ied4c6c49a6bdf278238272edd47a2006258be8e5 Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78344 Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-10-04{commonlib, libpayload}: Add "has_external_display" in coreboot tableSubrata Banik
This patch introduces a new coreboot table entry named "has_external_display" to understand if external display is attached. This information is useful to prevent graceful shutdown by payload when the LID is closed but an external display is present. This piece of the information will be gathered by coreboot and passed into the payload using this new entry aka external_display because payload (i.e., deptcharge) doesn't have any other way to determine if external display is available. BUG=b:299137940 TEST=Able to build and boot google/rex. w/o this patch: LID closed and external display attached (HDMI) in developer mode (GBB 0x39): > System is powered off by depthcharge w/ this patch: LID closed and external display attached (HDMI) in developer mode (GBB 0x39): > Booted to OS and device is alive/usable Change-Id: I0fa7eee4c5a50371a7a66c6ca1ac2c7d046d010b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77796 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04drivers/intel/gma: Update port select bit definitionsSubrata Banik
This commit updates the port select bit definitions for the TRANS_DDI_FUNC_CTL registers in the Intel GMA driver to accommodate the changes introduced since TGL SoC. Specifically, the following changes were made: - Updated the DDI select bit definitions from 3-bits (bit 28-30) to 4-bits (bit 27-30). - Introduces `INTEL_GMA_VERSION_2` config to accommodate the port and pipe related differences between previous generation GMA register (TRANS_DDI_FUNC_CTL) to the current generation GMA register. This commit backports the change from the following upstream patch: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3- lucas.demarchi@intel.com BUG=b:299137940 TEST=Able to build and boot google/rex. Change-Id: I815ffa90c2e235afd70baa7e3837e1f9af89b1b0 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-14x86: Add .data section support for pre-memory stagesJeremy Compostella
x86 pre-memory stages do not support the `.data` section and as a result developers are required to include runtime initialization code instead of relying on C global variable definition. To illustrate the impact of this lack of `.data` section support, here are two limitations I personally ran into: 1. The inclusion of libgfxinit in romstage for Raptor Lake has required some changes in libgfxinit to ensure data is initialized at runtime. In addition, we had to manually map some `.data` symbols in the `_bss` region. 2. CBFS cache is currently not supported in pre-memory stages and enabling it would require to add an initialization function and find a generic spot to call it. Other platforms do not have that limitation. Hence, resolving it would help to align code and reduce compilation based restriction (cf. the use of `ENV_HAS_DATA_SECTION` compilation flag in various places of coreboot code). We identified three cases to consider: 1. eXecute-In-Place pre-memory stages - code is in SPINOR - data is also stored in SPINOR but must be linked in Cache-As-RAM and copied there at runtime 2. `bootblock` stage is a bit different as it uses Cache-As-Ram but the memory mapping and its entry code different 3. pre-memory stages loaded in and executed from Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`). eXecute-In-Place pre-memory stages (#1) require the creation of a new ELF segment as the code segment Virtual Memory Address and Load Memory Address are identical but the data needs to be linked in cache-As-RAM (VMA) but to be stored right after the code (LMA). Here is the output `readelf --segments` on a `romstage.debug` ELF binary. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20 LOAD 0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW 0x4 Section to Segment mapping: Segment Sections... 00 .text 01 .data Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they are totally different for the Segment 1 holding the `.data` section. Since we need the data section `VirtAddr` to be in the Cache-As-Ram and its `PhysAddr` right after the `.text` section, the use of a new segment is mandatory. `bootblock` (#2) also uses this new segment to store the data right after the code and load it to Cache-As-RAM at runtime. However, the code involved is different. Not eXecute-In-Place pre-memory stages (#3) do not really need any special work other than enabling a data section as the code and data VMA / LMA translation vector is the same. TEST=#1 and #2 verified on rex and qemu 32 and 64 bits: - The `bootblock.debug`, `romstage.debug` and `verstage.debug` all have data stored at the end of the `.text` section and code to copy the data content to the Cache-As-RAM. - The CBFS stages included in the final image has not improperly relocated any of the `.data` section symbol. - Test purposes global data symbols we added in bootblock, romstage and verstage are properly accessible at runtime #3: for "Intel Apollolake DDR3 RVP1" board, we verified that the generated romstage ELF includes a .data section similarly to a regular memory enabled stage. Change-Id: I030407fcc72776e59def476daa5b86ad0495debe Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-09-14acpi: Comply with ACPI specification by making _STR unicode stringsCliff Huang
_STR should return Unicode string. From ACPI spec: 6.1.10 _STR (String) The _STR object evaluates to an Unicode string that describes the device or thermal zone. BUG=NA TEST=Check the changed _STR in SSDT to see if Unicode() macro is used Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I1f4b55a268c1dadbae456afe5821ae161b8e15a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77695 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-09-14drivers/intel/mipi_camera: Add DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOCJamie Ryu
This adds DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC to provide the option to load pre-production or production signed IPU FW from IPU kernel driver. BUG=None TEST=Build rex and brya to check if the build passes without an error. Change-Id: Ib507bceb6fd85d8ed764df82db400526a10e4d6e Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77854 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-11drivers: Remove space between function name and '('Elyes Haouas
Change-Id: I42e995952a72a23a5f3aeadf428ad13f25546854 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-08arch to drivers/intel: Fix misspellings & capitalization issuesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic52f01d1d5d86334e0fd639b968b5eed43a35f1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/77633 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-05drivers/intel/fsp2_0: Introduce MRC cache store after FSP-M/S APIsSubrata Banik
This patch refactors the existing MRC cache storing logic, which was spread between the ROM and RAM stages, into a single early MRC cache store stage. The only exception is when SoC user selects FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after FSP-S). It reverts all the boot-state logic previously used to locate and store MRC cache from NVS HOB into NVS because majority of the platform can potentially use the early MRC cache store with improved memory caching at the pre-RAM phase (with the ramtop implementation). The only exception is the Xeon SP platform, which currently locates the MRC cache post in FSP-S (at ramstage). Therefore, this patch provides an API to the FSP 2.x silicon init code to perform late storing of the MRC cache. In majority cases the updated logic, the romstage (post FSP-M) will attempt to save the MRC cache. Platform that selects FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is enabled, the MRC cache will either be written directly to NVRAM at the romstage or stashed into CBMEM for a late NVRAM write at ramstage. Below table captures the change in the boot state w/ and w/o this patch for storing the MRC cache. Overall the goal is to ensure the platform behavior is remain unchanged before and after this patch. w/o this patch: | | Save MRC | Finalize | Lock the | | | Cache | MRC Cache | Boot Medium | +-----------+----------------+----------------+----------------+ | MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME | | NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT | +-----------+----------------+----------------+----------------+ | MRC_STASH | BS_DEV | BS_DEV | BS_DEV | | TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| +-----------+----------------+----------------+----------------+ | FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV | | DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| | SILICON | | | | | INIT | | | | +-----------+----------------+----------------+----------------+ | Platform | BS_PRE | BS_DEV | BS_DEV | | w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY| | config | | | | | (FSP 2.0 | | | | | platforms | | | | w/ this patch: | | Save MRC | Finalize | Lock the | | | Cache | MRC Cache | Boot Medium | +-----------+----------------+----------------+----------------+ | MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME | | NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT | +-----------+----------------+----------------+----------------+ | MRC_STASH | BS_DEV | BS_DEV | BS_DEV | | TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY| +-----------+----------------+----------------+----------------+ | FSP_NVS | Post FSP-S | BS_DEV | BS_DEV | | DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY| | SILICON | | | | | INIT | | | | +-----------+----------------+----------------+----------------+ | Platform | Post FSP-M | BS_DEV | BS_DEV | | w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY| | config | | | | | (FSP 2.0 | | | | | platforms | | | | BUG=b:296704537 TEST=Able to build and boot google/rex without any boot time impact. Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-09-04{drivers/intel/fsp2_0, soc/intel}: Rename `SAVE_MRC_AFTER_FSPS` configSubrata Banik
This patch renames `SAVE_MRC_AFTER_FSPS` config to `FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon SP FSP implementation, where the FSP Silicon Init API produces Non-Volatile Storage (NVS) instead of the FSP-Memory Init API. According to the FSP 2.x specification (section 11.3), the FSP populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB after the FspMemoryInit() API in API mode. However, not all Intel SoC platforms that support the FSP 2.x specification adhere to this requirement. For example, the FSP binary for XEON SP platform produces NVS data (aka FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API. Therefore, attempting to locate NVS data after the FspMemoryInit() API on these platforms would result in an error. The `save_mrc_data.c` implementation provides the required hooks to locate the NVS post FSP-Silicon Init and store into Non-Volatile Storage. BUG=b:296704537 TEST=Able to build and boot Intel Xeon SP w/o any functional impact. Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-29drv/intel/fsp2_0: Add FW Splash Screen event log entriesSubrata Banik
This patch adds logic for logging the FW splash screen event to the event log. There could be three possible scenarios as below: 1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT or BMP_LOGO configs not enabled) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not present in the event log. 39 | 2023-08-27 12:42:54-0700 | System boot | 12 40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5 41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0 2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs are enabled) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is enabled in the event log. 34 | 2023-08-27 12:07:29-0700 | System boot | 11 35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled 36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5 37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0 3. Failed to render FW splash screen (due to any reason if FSP failed to render the splash screen) Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is disabled in the event log. 43 | 2023-08-27 13:06:10-0700 | System boot | 13 44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled 45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5 46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0 BUG=b:284799726 TEST=Verify that the event shows up in the event log when the user selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display the firmware splash screen. Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-28drivers/intel/gma: Remove space between function name and '('Elyes Haouas
Change-Id: Id7634099e40c0bf97944be124b494c41d6335ad7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-26vc/intel: Remove unnecessary Kconfig optionsMartin Roth
These Kconfig options were being used basically as #define statements, which is unnecessary. This isn't a good use of Kconfig options and would be better just as #defines if actually needed. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-25drivers/intel/fsp2/Makefile.inc: Deduplicate compression type checksFelix Singer
When LZMA compression is selected, then it's not needed to check if LZ4 compression is selected in addition. So instead of handling both cases separately, check for LZ4 only if LZMA is not selected. This applies to the cases of both, FSP-M and FSP-S. Change-Id: I4ea61a38baf4c29bf522a50a26c6b47292e67960 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77323 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-19drivers/intel/fsp2_0: Fix extraneous text after else directiveSubrata Banik
Fix the issue by adding the "ifeq" keyword which makes the extraneous text a correct conditional directive. Change-Id: Id8a8aa7acfdaeb0549f417fb013b2535a7298045 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77286 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-18{driver, soc/intel/cmn/cse}: Refactor ISH FW Version implementationSubrata Banik
This patch uses the CSE firmware specific data to store Intel ISH firmware related information. Sending an ISH partition version information command on every boot cycle would impact the overall boot performance. This information is used by the auto-test framework to ensure the ISH firmware update is proper for in-field devices. BUG=b:285405031 TEST=Able to build and boot google/rex. Verified ISH FW version is getting displayed across warm resets without impacting the boot time. Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-08-17drivers/intel/fsp2_0: Add configurable compression for logo cbfs fileSubrata Banik
This patch adds a new configuration option to allow the compression algorithm for the logo cbfs file to be specified. By default, the logo cbfs file is compressed using LZMA. However, enabling LZ4 compression can save ~2ms of boot time when the BMP_LOGO config is enabled. This patch verified that the logo cbfs file can be booted using either LZMA or LZ4 compression. BUG=b:284799726 TEST=Able to boot google/rex and verified firmware splash screen using either LZMA or LZ4 compression. Change-Id: Ib0aa5320632ae3f734004d2b1d495af11c2e1928 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-11drivers/intel/fsp2_0: Add API to convert BMP images to GOP BLT bufferSubrata Banik
This patch adds an API to convert BMP images into GOP BLT buffers for Intel FSP-S. This is required to display the OEM splash screen at pre-boot phase. Previously, Intel FSP-S had provision to consume the *.BMP file as is. However, starting with the Alder Lake platform, Intel FSP has dropped this conversion logic and expects the boot firmware to pass the BLT buffer directly. This patch implements the conversion logic in coreboot. BUG=b:284799726 TEST=Able to build and boot google/rex Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-08-06drivers: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the drivers directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-03drivers/intel/gma/Kconfig: Remove unused INTEL_GMA_OPREGION_2_0Elyes Haouas
Change-Id: I9241d713fb8cc26c768746c8e442b46292036d20 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76694 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31drivers/intel/fsp2_0/fsp_timestamp.c: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I03c21e180e9e399e5cb451bf3b9cfb6484cab68b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76778 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-30drivers/intel/gma/intel_bios.h: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I80b4b2df4a38dcbb28d928018446e91acae90ee6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-07drivers/intel/fsp2_0: Remove BUILD_TIME_STAMP_SIZE macroRonak Kanabar
Remove BUILD_TIME_STAMP_SIZE macro from coreboot because FSP 3223 version have BUILD_TIME_STAMP_SIZE macro defined as part of `FspProducerDataHeader.h`. Ref change: 9c28ab1d1a vc/intel/fsp/mtl: Update header files from 3194_81 to 3223.80 BUG=b:285110116 TEST=Able to build google/rex. Change-Id: I52707adf1aa6dadca8dcf82102f76916a0cfe346 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23{commonlib/drivers}: Have option to store MRC version inside CBMEMSubrata Banik
This patch introduces CBMEM ID to store the MRC version (similar to existing implementation that stores the FSP-M version inside CBMEM ID) inside cbmem so the version information is available across the different coreboot stages. For example: * romstage: Use the CBMEM ID version information to check if the MRC cache is valid and need to erase the MRC cache * ramstage: Use the CBMEM ID to store the MRC cache into the non-volatile space. BUG=b:261689642 TEST=Able to build and boot google/rex and dump the MRC version as below. cbmem --list CBMEM table of contents: NAME ID START LENGTH ... 21. MRC VERSION 5f43524d 75ffeb60 00000004 ... localhost ~ # cbmem -r 5f43524d | hexdump 00000000 01 12 07 00 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I91f735239b33c6f8ba41c076048903e4b213c6a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75921 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23driver/intel/fsp2_0: Add support to store MRC cache using MRC versionSubrata Banik
This patch uses the "generic" variable name as "version" while storing the MRC cache data instead referring to the FSP-M version or MRC version. Hence, updated all the instances of `fsp_version/fspm_version` with `version`. Also introduces the new option to the MRC cache version that allows SoC users to store the MRC cache version based on the supported EDK2 version. Intel FSP built with EDK2 version 202302 onwards has support to retrieve the MRC version by directly parsing the binary. Additionally, added the helper function `fsp_mrc_version()` and corresponding header file to read the MRC version from the FSP binary. BUG=b:261689642 TEST=Able to build and boot google/rex and google/omnigul. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia8af53aed674ad4a3b426264706264df91d9c6b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75920 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-18drivers/intel/fsp2_0: Correct FPDT timestamp unit and macro nameRonak Kanabar
FSP performance timestamp is in nano second by default. This patch is to correct unit in FSP performance timestamp data print and macro name to avoid confusion. Change-Id: I4aec4f63beddbd7ce6e8e3fc1b53a45da2ee0b00 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75816 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-15{driver, mb, soc}: Rename Intel CSE FPT config to ISH FW version configSubrata Banik
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config is clear. Any platform would like to fetch the currently running ISH firmware version should select this configuration. TEST=Able to build and boot google/marasov. Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-02drivers/intel/fsp2_0: Apply FSP Reset Status W/A for MultiPhaseSiInitSubrata Banik
This patch calls into fsp_get_pch_reset_status() to get the MultiPhaseSiInit API return status if FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN is enabled. Ideally FSP API should be able to return the status (both success and error code) upon exiting the FSP API but unfortunately there are some scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return any ERROR status. Hence, this function can be considered as an additional hook to read the FSP reset status by reading the dedicated HOB without relying on the FSP API exit status code. Any SoC platform that selects the FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN config will call into this newly added API to get the FSP return status from MultiPhaseSiInit. BUG=b:278665768 TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC code and call into this API to know the return status from MultiPhaseSiInit FSP API. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I749c9986e17e4cbab333b29425c9a4a4ba4128fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/74784 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
2023-05-02soc/intel/common: Introduce API to get the FSP Reset StatusSubrata Banik
This patch creates a function to read the FSP API Reset Status. This function relies on the FSP Scheduled Reset HOB which holds the reset type (warm/cold/shutdown) information along with any platform specific reset need (like global reset). Ideally FSP API should be able to return the status (both success and error code) upon exiting the FSP API but unfortunately there are some scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return any ERROR status. Hence, this function provides an additional hook to read the FSP reset status by reading the dedicated HOB without relying on the FSP API exit status code. Additionally, create FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN config option to handle broken FSP API return status issue. Any SoC platform that selects the `FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN` config will call into this newly added API to get the FSP return status from MultiPhaseSiInit. BUG=b:278665768 TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC code and call into this API to know the return status from MultiPhaseSiInit FSP API. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ief5d79736cc11a0a31ca2889128285795f8b5aae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-28treewide: Add missing include guards to chip.hJan Samek
Some of the chip.h files in the tree are missing the include guards. This patch adds them in order to avoid potential redefinions of symbols contained in these headers, when they are included multiple times in static.c generated by sconfig. Change-Id: I550a514e72a8dd4db602e7ceffccd81aa36446e3 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-27drivers/intel/fsp2_0: Inject newline after printing EFI GUIDSubrata Banik
TEST=fsp_print_guid() output doesn't get cobbled with other serial output and now separated by a newline character. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d47dbc5d493f86f14a1bbcf9cb5c16c0e12b841 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74781 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21drivers/intel/ish: Hook get ISH version into `.final`Subrata Banik
This patch creates .final hook to call into get ISH version function if platform has required config (`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support. BUG=b:273661726 TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-12Reland "drivers/intel/dptf: Add multiple fan support under dptf"Sumeet Pawnikar
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e. Add multiple fan support for dptf policies. This also fixes the Google Meet resolution drop issue as per b:246535768 comment#12. When system starts Google Meet video call, it uses the hardware accelerated encoder as expected. But, as soon as another system connects to the call, an immediate fallback is observed from hardware to software encoder. Due to this, Google Meet resolution dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC based fanless platforms. This same issue was not seen on fan based systems. With the fix in dptf driver where fan configures appropriate setting for only fan participant, not for other device participants, able to see consistent 720p resolution. BUG=b:246535768,b:235254828 BRANCH=None TEST=Built and tested on Alder Lake-P Redrix system for two fans support and on Alder Lake-N fanless systems. With this code change Google Meet resolution drop not observed. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-11drivers/fsp2_0/mp_service_ppi: Use struct device to fill in bufferArthur Heymans
Now the CPU topology is filled in struct device during mp_init. Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-30drivers/intel/fsp2_0/hand_off_block: use cb_err in fsp_find_range_hobFelix Held
Use enum cb_err as return value of fsp_find_range_hob instead of using the raw -1 and 0 values. Also update the call sites accordingly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id6c9f69a886f53868f1ef543c8fa04be95381f53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-29drivers/intel/fsp2_0: Add API to find FSP resource HOB by GUIDPratikkumar Prajapati
The API finds the FSP resource HOB for the given GUID. Returns the pointer to the HOB if found, otherwise NULL Change-Id: I4ebc9b7d214e5fc731ae45f28e7f5732a7635cbc Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-03-23soc/intel: Rename IA common code module from `TOM` to `RAMTOP`Subrata Banik
This patch renames all references of `top_of_ram` (TOM) in IA common `basecode` module (for example: functions, variables, Kconfig, Makefile and comments) with `ramtop` aka top_of_ram to make it more meaningful and to avoid conflicts with Intel SA chipset TOM registers. BUG=Able to build and boot google/rex with the same ~49ms savings in place. Change-Id: Icfe6300a8e4c5761064537fb256cfecbe2afb2d8 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73881 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-22drivers/intel/fsp2_0: Add support for FSP_ERROR_INFO_HOBRay Han Lim, Ng
Add a new Kconfig CONFIG_ENABLE_FSP_ERROR_INFO option to enable retrieval of FSP_ERROR_INFO_HOB from HobList created by FSP. Such a HOB could be generated by Intel SPR-SP FSP. This HOB data is defined in Intel®Firmware Support Package External Architecture Specification v2.1 Doc#611786-2.1. Change-Id: I812d1c22c1bbe5146630948ca6ca12c46ffd5504 Signed-off-by: Ray Han Lim, Ng <ray.han.lim.ng@intel.com> Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-13drivers/intel/fsp2_0: Have provision for caching TOM regionSubrata Banik
This patch enables early caching of TOM region to optimize the boot time if valid mrc cache is found (i.e. except the first boot after flashing/updating few AP firmware image). TEST=Able to build and boot google/rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-07drivers/intel/fsp2_0: Print `mrc_cache` size in decimalSubrata Banik
This patch updates the print msg of mrc_cache size from hex to decimal for easier understanding while debugging the issue. TEST=Able to build and boot google/rex. Without this patch: [SPEW ] MRC cache found, size ee75 With this patch: [SPEW ] MRC cache found, size 61045 bytes Change-Id: I69feeb36423e47a5992c9f27d9a7042803a492cd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2023-02-10drivers/fsp2: Don't print garbage if the FSP signature doesn't matchFred Reitberger
Using a &uint64_t as a string argument does not include the required NULL character termination. Update the format string to only print the 8 desired characters and not continue printing stack memory until a NULL is found. Before: [EMERG] Invalid UPD signature! FSP provided "AMD_01_M;....`", expected was "CEZANE_MAMD_01_M;....`". After: [EMERG] Invalid UPD signature! FSP provided "AMD_01_M", expected was "CEZANE_M". Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ib334daa8518a92e0cf3d22c4d95908f4c84afe04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72911 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07src: Move POST_BOOTBLOCK_CAR to common postcodes and use itMartin Roth
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific postcodes into the common postcode list, and uses it for the cache-as-RAM init as needed. Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in most of the others, the values were consolidated into 0x21. This will change the value on some platforms. Any conflicts should get sorted out later in the conversion process. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8527334e679a23006b77a5645f919aea76dd4926 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-01treewide: Remove duplicated include <device/pci.h>Elyes Haouas
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>. Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-31drivers/intel/fsp2_0: Simplify check for CONFIG_SAVE_MRC_AFTER_FSPSDavid Hendricks
This uses a simpler form of #if to check if CONFIG_SAVE_MRC_AFTER_FSPS is enabled, referencing the Kconfig variable only once and defaulting to the original behavior if not. Change-Id: I4711c1474d9a3a5c685dd31561619c568fab075c Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72587 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-29drivers/intel/fsp2_0: Add saving MRC data after FSP-S optionJohnny Lin
When Kconfig SAVE_MRC_AFTER_FSPS is selected, save MRC training data after FSP-S instead of FSP-M. For now only SPR-SP server FSP supports this. This issue surfaces with SPR-SP, because of the memory type (DDR5 support) and memory capacity (more memory controllers, bigger DRAM capacity). Therefore Intel decided to save MRC training data after FSP-S with SPR-SP FSP. Change-Id: I3bab0c5004e717e842b484c89187e8c0b9c2b3eb Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71950 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-26soc/intel/alderlake: Wait for panel power cycle to completeJeremy Compostella
The Alder Lake PEIM graphics driver executed as part of the FSP does not wait for the panel power cycle to complete before it initializes communication with the display. It can result in AUX channel communication time out and PEIM graphics driver failing to bring up graphics. If we have performed some graphics operation in romstage, it is possible that a panel power cycle is still in progress. To prevent any issue with the PEIM graphics driver it is preferable to ensure that panel power cycle is complete. This patch replaces commit ba2cef5b5493 ("soc/intel/common/block/early_graphics: Introduce a 200 ms delay") workaround patch. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Developer screen is visible in the recovery flow Change-Id: Iadd6c9552b184f7d6ec8df9d0d392634864ba50b Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72419 Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-26drivers/intel/gma: Use libgfxinit Update_Output to turn off graphicsJeremy Compostella
We were using the libgfxinit `Initialize' function with the `Clean_State' parameter because the more appropriate `Update_Output' function was not performing all the necessary clean up operations for the PEIM driver to be successful when libgfxinit was used in romstage. Thanks to a lot of experiments and some log analysis efforts, we were able to identify the missing operation and fix the `Update_Output' function (cf. https://review.coreboot.org/c/libgfxinit/+/72123). The `initialized' global variable is now unnecessary as we track the initialization in the Ada code instead. Since the `Update_Output' function does not return any value, this patch modifies the `gma_gfxstop' prototype accordingly. This does not have any impact as the return value was not used anyway. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Developer screen is visible Change-Id: I53d6fadf65dc09bd984de96edb4c1f15b64aeed0 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72125 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-26drivers/intel/gma: Dump output setting only if DEBUG_ADA_CODE is setJeremy Compostella
This patch restricts the dump of the vebose graphics output settings to configuration with the `DEBUG_ADA_CODE' flag set. BUG=b:264526798 BRANCH=firmware-brya-14505.B TEST=Configuration dump is seen only if DEBUG_ADA_CODE is set Change-Id: Iadd6c9552b184f7d6ec8df9d0d392634864ba50c Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72418 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-20drivers/intel/gma/hires_fb/gma-gfx_init.adb: Remove spaces before tabsElyes Haouas
Change-Id: Ifab3fcd2de8f0c1672d1a9a21c8e0c5dba5b7443 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72077 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-20drivers/intel/gma/text_fb/gma-gfx_init.adb: Remove spaces before tabsElyes Haouas
Change-Id: I421602c81d9a186eb36a289d6e5048b5aa343a2d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-14drivers/intel/i210/Makefile.inc: Fix "No such file or directory" errorElyes Haouas
Fix: cc1: error: src/drivers/intel/i210: No such file or directory [-Werror=missing-include-dirs] Change-Id: I94b0f99353ed3a582ea590cbc6b12dec6294c75d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-13drivers/intel/i210.h: Remove 'extern' from declarationArthur Heymans
"extern" is always implied with function declarations. Also remove the comment as the linker will just tell you the same if a definition is missing. Change-Id: I53679ab57981790f82affb46a006281b348af574 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71869 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-01-12drivers/intel/gma: Enable Alder Lake libgfxinit supportJeremy Compostella
This CL requires the following libgfxinit patches: - https://review.coreboot.org/c/libgfxinit/+/65087 - https://review.coreboot.org/c/libgfxinit/+/65178 - https://review.coreboot.org/c/libgfxinit/+/67489 - https://review.coreboot.org/c/libgfxinit/+/65140 - https://review.coreboot.org/c/libgfxinit/+/67490 - https://review.coreboot.org/c/libgfxinit/+/67491 - https://review.coreboot.org/c/libgfxinit/+/67492 - https://review.coreboot.org/c/libgfxinit/+/67493 - https://review.coreboot.org/c/libgfxinit/+/67494 - https://review.coreboot.org/c/libgfxinit/+/67495 - https://review.coreboot.org/c/libgfxinit/+/67496 - https://review.coreboot.org/c/libgfxinit/+/67497 - https://review.coreboot.org/c/libgfxinit/+/67498 - https://review.coreboot.org/c/libgfxinit/+/67499 - https://review.coreboot.org/c/libgfxinit/+/67500 - https://review.coreboot.org/c/libgfxinit/+/67800 - https://review.coreboot.org/c/libgfxinit/+/67801 - https://review.coreboot.org/c/libgfxinit/+/67802 - https://review.coreboot.org/c/libgfxinit/+/69341 BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=libgfxinit is compiled with the Alder Lake configuration Change-Id: I2de94556f8105447788aaa02340ad669fb68ca0c Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70301 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Zhixing Ma <zhixing.ma@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-12soc/intel/common/block: Add Intel VGA early graphics supportJeremy Compostella
This patch introduces an early graphics driver which can be used in romstage in cache-as-ram mode. The implementation relies on `libgfxinit' and provide VGA text mode support. SoCs wanting to take advantage of this driver must implement the `early_graphics_soc_panel_init' function to set the panel power sequence timing parameters. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=Graphics bring up observed on skolas with extra patches Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11drivers/intel/gma: Hook up libgfxinit in romstageJeremy Compostella
A mainboard port needs to: - select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT' - implement the Ada package `GMA.Mainboard' with a single function `ports' that returns a list of ports to be probed for displays. - set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use in romstage (and ramstage) for the graphic device. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=libgfxinit compiles in romstage. libgfxinit successfully executes in romstage and ramstage using the requested MMIO setting on skolas. Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27tree/acpi: Replace constant "Zero" with actual numberFelix Singer
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27drivers/intel/ish: Add ADL-P ISH DIDSubrata Banik
This patch adds ISH ID for ADL-P to ensure dynamic ASL code is added into SSDT. With this patch: Scope (\_SB.PCI0.ISHB) { Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"), Package (0x01) { Package (0x02) { "DmaProperty", One } } }) } Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I48dc6056155824239bb88eda2b0ff5bcd36ced15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71262 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyle Lin <kylelinck@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-12-23soc/intel: Drop SoC specific DPTF implementationSubrata Banik
This patch drops the SoC specific implementation as DPTF driver can now fillin those platform specific data using SoC specific macros. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: If65976f15374ba2410b537b1646ce466ba02969b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-23drivers/intel/dptf: Implement API to fill DPTF platform infoSubrata Banik
This patch fills in a generic platform info structure based on the inputs from the SoC dptf header file (soc/dptf.h). It will help to make things common and drop unnecessary back and forth call between common code and SoC code. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3521882495485cef686655abd65337515bae5faa Reviewed-on: https://review.coreboot.org/c/coreboot/+/71111 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23tree: Replace And(a,b) with ASL 2.0 syntaxFelix Singer
Replace `And (a, b)` with `a & b`. Change-Id: Id8bbd1a477e6286bbcb5fa31afd1c7a860b1c7dc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70851 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23tree: Replace And(a,b,c) with ASL 2.0 syntaxFelix Singer
Replace `And (a, b, c)` with `c = a & b`, respectively `c &= b` where possible. Change-Id: Ie558f9d0b597c56ca3b31498edb68de8877d3a2f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70850 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22drivers/intel/fsp2_0: Don't include <commonlib/bsd/compiler.h>Elyes Haouas
<commonlib/bsd/compiler.h> is automatically included in all compilation units by the build system. (see Documentation/contributing/coding_style.md) Change-Id: I09ed0c5eb2054c3add026f200c0fd3f609f73197 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67905 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22drivers/intel/dptf: Add new config for EISA HID supportSubrata Banik
This patch adds config to let SoC users (config) to choose if EISA HID is supported. All SoC config would like to support EISA HID need to select `HAVE_DPTF_EISA_HID` config. Prior to Tiger Lake, all DPTF devices used 7-character EISA IDs. If selected, the 7-character _HIDs will be emitted, otherwise, it will use the "new" style, which are regular 8-character _HIDs. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6bf64f74c447b28665d31a64181c33df882d5d06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71108 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-22drivers/intel/dptf: Add `soc_` prefix for `get_dptf_platform_info()`Subrata Banik
This patch makes the SoC specific callback code more readable by adding `soc_` prefix into the `get_dptf_platform_info()`. In nutshell this patch renames `get_dptf_platform_info()` to `soc_get_dptf_platform_info()`. TEST=Able to build Google/Rex without any compilation issue. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I27d6a146d5928e1742f82f85f51ad42656f46344 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-12-19tree: Replace Or(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Or (a, b)` with `a | b`. Change-Id: I73842cd4843ebb0b48440059ae9dcf6c82235a76 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70845 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-19drivers/intel/fsp2_0: Implement `mps2_noop_get_number_of_processors()`Subrata Banik
This patch implements mps2_noop_get_number_of_processors() API with minimal information required for Intel MTL FSP to utilise the `MP_SERVICES_PPI_V2_NOOP` config. The major difference between Intel ADL and MTL FSP in terms of doing CPU feature programming aka utilizing MP PPI wrapper code is that, starting with MTL, FSP has dropped the `SkipMpInit` UPD. It means now, coreboot doesn't have any way to skip FSP doing MP Init operation. But during ADL, coreboot had introduced the MP_SERVICES_PPI_V2_NOOP config that is used to skip FSP about actually running any CPU feature programming on APs. The idea is to use the same config even in MTL to provide only the must have information (to bypass any assert in FSP during debug image) to FSP. Passing `FSP_UNSUPPORTED` from mps2_noop_get_number_of_processors() results in `assert` while compiling FSP in debug mode hence, implementing the function to pass only the information about BSP being the active processor along with passing `FSP_SUCCESS` (eventually it makes FSP happy and doesn't run into any issue in debug and/or release mode). TEST=Able to build and boot Google/Rex and Google/Kano while coreboot skip calling into FSP for doing MP init. Change-Id: I75d7e151699782210e86be564b0055d572cacc3f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70555 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-14drivers/intel/gma/acpi: Replace Store(a,b) with ASL 2.0 syntaxFelix Singer
Replace `Store (a, b)` with `b = a`. Change-Id: Ifd3a814228df6a399fe1110abf5b5bc18e6fd6d2 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-13drivers/intel/ish: Allow adding DmaProperty to _DSDReka Norman
On nissa, the ISH is running closed source firmware, so the ChromeOS security requirements specify it must be behind an IOMMU. Allow adding DmaProperty to the _DSD of the ISH device. This will result in the kernel marking the device as untrusted. BUG=b:249846505 TEST=Check SSDT is correct, and kernel detects the DmaProperty and firmware-name properties. SSDT entry on yaviks with both add_acpi_dma_property and firmware_name set in devictree: Scope (\_SB.PCI0.ISHB) { Name (_DSD, Package (0x04) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "firmware-name", "adl_ish_lite.bin" } }, ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"), Package (0x01) { Package (0x02) { "DmaProperty", One } } }) } Change-Id: Ie1539fc757e72e995e98c3ecf83e705e3bede8c0 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-12-12{drivers,superio}/acpi: Replace ShiftRight(a,b) with ASL 2.0 syntaxFelix Singer
Replace `ShiftRight (a, b)` with `a >> b`. Change-Id: I0751d00186e8dff38e02e7bf7d8ebf5a17514a58 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
<device/mmio.h>` chain-include `<arch/mmio.h>: https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes Also sort includes while on it. Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-06drivers/intel/fsp2_0: Update MRC cache in ramstageReka Norman
Currently the MRC cache is updated in romstage, immediately after returning from FSP-M. Since cbmem is not cached in romstage, the update is slow (~6 ms on nissa). Specifically, the new MRC data returned by the FSP is stored in the FSP reserved memory in cbmem, so hashing the new data is slow. Move the MRC cache update to ramstage, where cbmem is cached. On nissa, this saves ~5 ms of boot time. Before: 552:finished loading ChromeOS VPD (RW) 631,667 (16) 3:after RAM initialization 637,703 (6,036) 4:end of romstage 650,307 (12,603) After: 552:finished loading ChromeOS VPD (RW) 631,832 (15) 3:after RAM initialization 633,002 (1,169) 4:end of romstage 645,582 (12,580) In ramstage, save_mrc_data() takes ~138 us. BUG=b:242667207 TEST=MRC caching still works as expected on nivviks - after clearing the MRC cache, memory is retrained on the next boot, but cached data is used on subsequent boots. Change-Id: Ie6aa2dee83a3ab8913830746593935d36a034b8d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-11-30/: Remove extra space after commaElyes Haouas
Change-Id: Ic64625bdaf8c4e9f8a5c1c22cece7f4070012da7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69903 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-29Revert "src/arch/x86: Use core apic id to get cpu_index()"Arthur Heymans
This reverts commit 095c931cf12924da9011b47aa64f4a6f11d89f13. Previously cpu_info() was implemented with a struct on top of an aligned stack. As FSP changed the stack value cpu_info() could not be used in FSP context (which PPI is). Now cpu_info() uses GDT segments, which FSP does not touch so it can be used. This also exports cpu_infos from cpu.c as it's a convenient way to get the struct device * for a certain index. TESTED on aldrvp: FSP-S works and is able to run code on APs. Change-Id: I3a40156ba275b572d7d1913d8c17c24b4c8f6d78 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69509 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-25drivers/intel/mipi_camera: Remove IPU ES support entry for RPLjimlai
The current IPU ES entry value is always set to true for RPL and kernel picks the ES version of the main IPU FW even for the production bootloader but loading is not successful due to the authentication failure. On Raptor Lake silicon, the production binaries are backward compatible with ES parts. This change removes the IPU ES support ACPI entry since the kernel needs to load the production IPU main firmware on both the ES/QS parts. BUG=b:258125833 TEST=Verify the Camera functionality by enabling the IPU secure mode on RPL variants with both ES/QS silicon. Signed-off-by: Jim Lai <jim.lai@intel.com> Change-Id: I9fd8ea0dd6ffdb16961bb017ba4388bf99e4d5bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/69929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-22src/drivers: Remove unnecessary space after castsElyes Haouas
Change-Id: I16689da893b5a0c3254364759d435281cb3e1caf Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69803 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18cbmem_top_chipset: Change the return value to uintptr_tElyes Haouas
Get rid of a lot of casts. Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-11-16drivers/intel/fsp2_0: add log level parameter to fsp_print_guidFelix Held
Not all functions that call fsp_print_guid print their output with the BIOS_SPEW log level, so introduce a new log level parameter so that the caller of fsp_print_guid can specify which log level fsp_print_guid should use for printing the GUID. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3b37afe703f506d4913f95a954368c0eec0f862d Reviewed-on: https://review.coreboot.org/c/coreboot/+/69599 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-14drv/intel/fsp2_0/hand_off_block: rework fsp_find_extension_hob_by_guidFelix Held
Use the new fsp_hob_iterator_get_next_guid_extension function in fsp_find_extension_hob_by_guid instead of iterating through the HOB list in this function. TEST=AMD_FSP_DMI_HOB is still found and the same type 17 DMI info is printed on the console. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4d4ce14c8a5494763de3f65ed049f98a768c40a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-14drivers/intel/fsp2_0/hand_off_block: use iterator in fsp_find_range_hobFelix Held
Drop the find_resource_hob_by_guid implementation and use the new fsp_hob_iterator_init and fsp_hob_iterator_get_next_guid_resource functions in fsp_find_range_hob. TEST=Mandolin still finds the TSEG range HOB and uses the correct TSEG location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I00786cbeea203fba195ddc953c3242be544a7d70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-14drivers/intel/fsp2_0/hand_off_block: add functions to iterate over HOBsFelix Held
Introduce iterator function to go through the HOBs that will be used in follow-up commits both from the rest of the common FSP HOB access code and from SoC-specific code that needs to access specific HOBs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If86dde2a9f41d0ca7941493a92f11b91a77e2ae0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-11-11drivers/intel/fsp2_0/hand_off_block: remove unneeded line breaksFelix Held
Since the characters per line limit was increased from 80 to 96, some line breaks can be removed to improve code readability. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-07drivers/intel/fsp2_0/memory_init.c: clean codeMaximilian Brune
No need to call a function that just instantly returns. It greatly enhances readability to just check before calling a funtion and it also removes an extra argument. Change-Id: I4d57c45ede520160ef615725c023b7e92289a995 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-03{device,drivers}: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I1727bf56b4090d040aab413006dec7aca0587d44 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-10-26src/drivers: Clean up includesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ia40678019b2a54deb246dbfbf33ec37a8c3839e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-25 20:31:58 +0000