summaryrefslogtreecommitdiff
path: root/src/drivers/intel/gma
AgeCommit message (Collapse)Author
2018-03-14drivers/intel/gma: fix opregion SCI register for Atom platformsMatt DeVillier
Most Intel platforms use separate registers for software-based SMI (0xe0) and SCI (0xe8), but Atom-based platforms use a single combined register (0xe0) for both. Adjust opregion implementation to use the correct register for Atom-based platforms. Test: Boot Windows on Atom-based ChromeOS device with Tianocore payload and non-VBIOS graphics init; observe Intel display driver loaded correctly and internal display not blank. (requires additional change for Atom platforms to select CONFIG_INTEL_GMA_SWSMISCI) Change-Id: I636986226ff951dae637dca5bc3ad0e023d94243 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-01-29intel: Prepare registers so Windows drivers are happierPatrick Georgi
Change-Id: I12ebed30de4df9814ccb62341c7715fc62c7f5b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/23431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-12drivers/intel/gma: Power up legacy VGA block earlyNico Huber
This is required at least on Skylake to be able to configure text mode. 3rdparty/libgfxinit is also updated by the single commit: 42fb2d065d gma: Add procedure to power up legacy VGA block Change-Id: I2fe144765e2b2acd9f6b76db375cae5b8feb5489 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-10-283rdparty/lib{hwbase,gfxinit}: Update to latest masterNico Huber
Simplifies our C interface function gma_gfxinit(), due to the following changes: * *libgfxinit* knows about the underlying PCI device now and can probe MMIO addresses by itself. * The framebuffer mapping is now completely handled inside the library where we validate that we neither overflow - the stolen memory, - the GTT address space, the GTT itself nor - the aperture window (i.e. resource2 of the PCI device) that we use to access the framebuffer. Other changes: * Fixes and a quirk for DP training. * Fix for DP-VGA adapters that report an analog display in EDID. * Fixes for Skylake support with coreboot. * DDI Buffer drive-strength configuration for Haswell, Broadwell and Skylake. * `gfx_test` can now be run from X windows (with glitches). * Compatibility with GCC 7 and SPARK GPL 2017. TEST=Booted lenovo/t420 and verified that everything works as usual. Change-Id: I001ba973d864811503410579fd7ad55ab8612759 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-28drivers/intel/gma: Put gma_gfxinit() into its own headerNico Huber
The current header `i915.h` is too invasive to be used everywhere where we want to use *libgfxinit*. Change-Id: Iba57256d536e301e598d98182448d2daa1bf9a89 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-23drv/intel/gma/opregion: fix opregion version for WindowsMatt DeVillier
Although Intel's current spec[1] shows the OpRegion structure version as being the top 16 bits of the field, Intel's Windows drivers require the OpRegion structure version to be in the top 8 bits of the field when not using a VGA BIOS (eg, NGI or GOP driver). As the Linux i915 driver only checks that the version is >= 2, there is no change in functionality there. This change effectively matches Intel's implementation in TianoCore, where the version is set to 0x0200 << 16. [1] https://01.org/sites/default/files/documentation/skl_opregion_rev0p5.pdf TEST: Boot Windows [8.1,10] in UEFI mode w/GOP graphics init and Legacy mode with libgfxinit, observe Intel GPU driver functional. Change-Id: Ic2903ee4829689ec4117aec93dce0b87cec6f313 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-13drv/intel/gma/opregion: Add common init_idg_opregion()Matt DeVillier
Add a new common method to initialize ACPI OpRegion. * Try to locate vbt.bin in CBFS. * Try to locate VBIOS in CBFS. * Keep existing code to probe at 0xc0000. Tested on Lenovo T430 (sandybridge) using vbt.bin, tested using buggy VBIOS with wrong vbt_offset, tested with fake vbt written by NGI at 0xc0000. Tested with https://review.coreboot.org/#/c/21766/ on i945 (using fake vbt at 0xc0000), x4x (using vbt.bin) and gm45 (using vendor VBIOS). In all cases linux was successfully provided with VBT from ACPI opregion. Change-Id: I8ee50ea9900537bd9e3ca5ab0cd3f48d2acec970 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-04Kconfig: Move and rename ADD_VBT_DATA_FILEPatrick Rudolph
Move ADD_VBT_DATA_FILE to "Devices" menu and rename it to INTEL_GMA_ADD_VBT_DATA_FILE. Depend on Intel platforms to avoid confusing users of non-Intel platforms. The Intel GMA driver will use the vbt.bin, if present, to fill the ACPI OpRegion. Change-Id: I688bac339c32e9c856642a0f4bd5929beef06409 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-11driver/intel/gma: Allow use of GFX_GMA_ANALOG_I2C_HDMI_x in C NGIArthur Heymans
These Kconfig options can be reused for the same purpose of selecting the correct i2c pins for probing the analog output EDID in C native graphic init. For this purpose this patch makes those options independent of GFX_GMA and MAINBOARD_HAS_LIBGFXINIT. Change-Id: If29c541d414e12b95d96ae9c249a7a20e863fe06 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-11drivers/intel/gma/opregion: migrate from nb/commonMatt DeVillier
Migrate opregion code from northbridge/intel/common to drivers/intel/gma in preparation for consolidation with soc/intel/common opregion code. Rename init_igd_opregion() for clarity and disambiguation with other implementations. Change-Id: I2d0bae98f04dbe7e896ca34e15f24d29b6aa2ed6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-28src/drivers: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
This excludes files which are mostly spaces, which I felt should be handled separately. Change-Id: I33043a3090e2fc6e9d2fd81e8a5e46fb6cb0aa35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-15drv/intel/gma/i915: Get rid of unused function prototypePatrick Rudolph
The function prototype isn't used any more, remove it. Change-Id: Ie5bd4e4ec8f28bc0768d5427cf734ef77855a15e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-13src/drivers: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: Ib3a1cf04482a8f19b159c31cfb16a7b492748d91 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-12drv/intel/gma/opregion: Add method to restore ASLSPatrick Rudolph
Add a new method to restore ASLS on S3 resume. Use new interface introduced in last commit. Change-Id: I254683081cbaf3a5938794dcba140ac9ee07f48a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-12drv/intel/gma/opregion: Add interface for GNVS ASLB handlingPatrick Rudolph
Add and use new interface to set and get GNVS' ASLB register. To be used by Intel's gma driver to set ASLB at ACPI table creation and to get ASLB on S3 resume. Change-Id: If30c6b2270069783b0892774802f47406404da5f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-12drv/intel/gma/opregion: Add function to set ASLS registerPatrick Rudolph
Add a new method to set ASLS register that holds the ACPI OpRegion base address. Change-Id: I4850500ac6d58f80b0eddc81514053c87774405c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-10drivers/intel/gma: Fix undefined behaviorRyan Salsamendi
Fix undefined behavior found by clang's -Wshift-sign-overflow, find, and source inspection. Left shifting an int where the right operand is >= the width of the type is undefined. Add UL suffix since it's safe for unsigned types. Change-Id: I5240a19647c8ad59f64925f3e1c199446a886d2d Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-on: https://review.coreboot.org/20466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-03northbridge/intel/haswell: Fix undefined behaviorRyan Salsamendi
Fix reports found by undefined behavior sanitizer. Left shifting an int where the right operand is >= the width of the type is undefined. Add UL suffix since it's safe for unsigned types. Change-Id: If2d34e4f05494c17bf9b9dec113b8f6863214e56 Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-on: https://review.coreboot.org/20447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-22drv/intel/gma/acpi: Fix copyright headerPatrick Rudolph
Use full text GPLv2 header. Change-Id: I937aed725ebf0d2e12c52ac4d94794830fbd764d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-05intel/gma: Fix typo GMBUS0 -> GMBUS1 in edid.cSebastian "Swift Geek" Grzywna
This typo existed in code before rewriting for using defines and it's clearly visible after rewrite. Previously it was writing to reserved area of GMBUS0 register, while values are matching those of GMBUS1. This line probably is a no-op since it's just sending the STOP again (without an address set this time). Change-Id: Ic85ef925c41ad01ed469f9d4f4412cbe44ca6d8e Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/16341 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-29gma/acpi: Fix argument count to _DSSMatt DeVillier
As the comment above the change indicates, and per ACPI spec, _DSS has one argument. Change-Id: Ic05832d412cd0c89ed3a275c4db694a9118dac28 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-22drivers/intel/gma: Drop unused INTEL_DPNico Huber
Change-Id: I786848cd48c6fcfecf9b72c60623cadcfcbb7db7 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-18coreboot_tables: specify clear interface for lb_framebuffer()Aaron Durbin
For some reason the "interface" for adding framebuffer information is sitting in src/include/vbe.h while also guarding the call to fill_lb_framebuffer() with vbe_mode_info_valid() along with some macro if CONFIG_* for good measure. Move the fill_lb_framebuffer() declaration to coreboot_tables.h and provide a comment about how it should be used. Also, now that there's no need for the notion of a global vbe_mode_info_valid() remove it from the conditional call path of fill_lb_framebuffer(). Change-Id: Ib3ade6314624091ae70424664527a02b279d0c9b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-083rdparty/libgfxinit: Update submodule pointerNico Huber
Some renamings force us to update our code: * Scan_Ports() moved into a new package Display_Probing. * Ports Digital[123] are called HDMI[123] now (finally!). * `Configs_Type` became `Pipe_Configs`, `Config_Index` `Pipe_Index`. Other noteworthy changes in libgfxinit: * libgfxinit now knows about ports that share pins (e.g. HDMI1 and DP1) and refuses to enable any of them if both are connected (which is physically possible on certain ThinkPad docks). * Major refactoring of the high-level GMA code. Change-Id: I0ac376c6a3da997fa4a23054198819ca664b8bf0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18770 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03nb/intel: Deduplicate vbt headerPatrick Rudolph
Move header and delete duplicates. Change-Id: I0e1f5d9082626062f95afe718f6ec62a68f0d828 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18903 Tested-by: build bot (Jenkins) Tested-by: coreboot org <coreboot.org@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-31drivers/intel/gma: Guard GFX_GMA_* configsNico Huber
It's confusing to have these Kconfig symbols for non-Intel boards. Change-Id: I4903c816258e5d2b8ed8704295b777aee175e8bc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18795 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-18nb/i945/gma.c: Refactor panel setupArthur Heymans
This reuses some of gm45 code to set up the panel. Panel start and stop delays and pwm frequency can now be set in devicetree. Linux does not make the difference between 945gm and gm45 for panel delays, so it is safe to assume the semantics of those registers are the same. The core display clock is computed according to "Mobile Intel® 945 Express Chipset Family" Datasheet. This selects Legacy backlight mode since most targets have some smm code that rely on this. This sets the same backlight frequency as vendor bios on Thinkpad X60 and T60. A default of 180Hz is selected for the PWM frequency if it is not defined in the devicetree, this might be annoying for displays that are LED backlit, but is a safe value for CCFL backlit displays. Change-Id: I1c47b68eecc19624ee534598c22da183bc89425d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-04drivers/intel/gma/vbt: Add Kconfig symbol for SSC refNico Huber
The selection of the SSC reference frequency for LVDS was based on a completely unrelated clock. The `ssc_freq` flag should be set when the SSC reference runs at a different frequency than the general display reference clock (DREF). For most platforms, there is no choice, i.e. for i945 and gm45 the SSC reference always differs from the display reference clock (i945: 66Mhz SSC vs. 48MHz DREF; gm45: 100MHz SSC vs. 96Mhz DREF), for Nehalem and newer, it's the same frequency for SSC/non-SSC (120MHz). The only, currently supported platform with a choice seems to be Pineview, where the alternative is 100MHz vs. the default 96MHz. Change-Id: I7791754bd366c9fe6832c32eccef4657ba5f309b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24drivers/intel/gma/vbt: Fix style and minor issuesNico Huber
o Fix indentation and other whitespace issues, o Use `const` where applicable, o Avoid retyping the same constant literals, o Actually read PCI revision from the device (instead of using the lowest class byte). Change-Id: I2c64153c61a51a6a87848360d22f981225812a3b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18185 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-19drivers/intel/gma: Use scaling to simplify fb configNico Huber
Utilize libgfxinit's support for scaling to simplify the framebuffer configuration. In case of multiple displays of different resolutions, we had configured one framebuffer big enough for their union, each display only showing its respective upper left window. Instead, we use the smallest resolution now and show the whole image on all displays. Change-Id: I70a9d92f88ef891703829945264f94ac7eff09b0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17492 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-12-19drivers/intel/gma: Add textmode support with libgfxinitNico Huber
Add an alternative gfxinit implementation for textmode. The legacy VGA plane and textmode is configured through coreboot provided functions. libgfxinit uses this plane as alternative to the usual high resolution plane. Change-Id: Iad0754c50fc6faec35f49583fe1c7cb50ac6c0c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17279 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-29drivers/intel/gma: Hook up libgfxinitNico Huber
Add `libgfxinit` as another option for native graphics initialization. For that, the function gma_gfxinit() (see drivers/intel/gma/i915.h) has to be called by the respective northbridge/soc code. A mainboard port needs to select `CONFIG_MAINBOARD_HAS_LIBGFXINIT` and implement the Ada package `GMA.Mainboard` with a single function `ports` that returns a list of ports to be probed for displays. v2: Update 3rdparty/libgfxinit to its latest master commit to make things buildable within coreboot. v3: Another update to 3rdparty/libgfxinit. Including support to select the I2C port for VGA. Change-Id: I4c7be3745f32853797d3f3689396dde07d4ca950 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-07src/drivers: Remove whitespace after memcpy & memsetElyes HAOUAS
Change-Id: If79eb706b6d44f7c34dfe31a1545f5850870b334 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16866 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-27intel/gma/vbt.c: pad the ID string with spaces.Arthur Heymans
The VBT id string is 20 characters long. If the string is shorter than 20 it needs spaces at the end. This change is cosmetic as all strings were padded by hand. Change-Id: Id6439f1d3dbd09319ee99ce9d15dbc3bcead1f53 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16739 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-08intel/gma: Use defines for registers and values in edid.cSebastian "Swift Geek" Grzywna
This replaces magic values with defines without changing any value. Change-Id: I332442045aa4a28ffed88fc52a99a4364684f00c Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/16339 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-31src/drivers: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I4d0087b2557862d04be54cf42f01b3223cb723ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16321 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-04-01intel/gma: Fix VBT generationPatrick Rudolph
The log shows the following error on systems that use the native gfx init. The error isn't shown using the VBIOS blob: GET_VBIOS: aa55 8086 0 3 0 VBIOS not found. Don't shift the class-code, as it's already shifted by the PCI layer. Tested-on: x220 Tested-by: Alexander Couzens <lynxis@fe80.eu> Change-Id: I69018940dd51966b45774e0576a1380f90716dce Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-10-31intel/gma: Return success for Intel int15 VGA set panel type hookKonstantin Aladyshev
One of the interrupts in intel_vga_int15_handler lacks positive return status. Write correct status to avoid error messages in log. TEST=With this change `int15 call returned error` is not shown anymore on a custom board with Intel Atom CPU, i945GME northbridge and i82801gx southbridge. Change-Id: I740b2df9bd6a7d261d89bef74b924edbb64354aa Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/12255 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-12gma ACPI: Do not overwrite backlight configurationNico Huber
Changes to CR1 and CR2 were effectively overwriting the backlight configuration from the devicetree with static values. Instead read the maximum brightness value from BCLM (backlight modulation frequency) and calculate the target level (Arg0 is the target level as percentage). Turned out that _BQC has to return a value from the list returned by _BCL. So XBQC got a little heavier to search for the correct value. Change-Id: I35419993c8250c95fc69ba4db30db9dba9e6f8ff Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11704 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-12gma ACPI: Consolidate non-PCH and PCH brightness levelsNico Huber
The two cases only differ in the register locations. As the values in BRIG were all the same, consolidate them. They also got normalized to percentages as the ACPI spec wants that (0x61 was 100% before). Change-Id: I9216a953bb89458ed102c39194ea370cbf463d5e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11703 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-12gma: Consolidate Intel IGD ACPI code some moreNico Huber
Consolidate some common (and mostly broken) code. Will try to fix things in separate commits. Maybe, igd.asl taken from gm45 (the non-PCH case) could also be used for i945 and sch. But this needs further investigation. Change-Id: Id3663bf588458e1e71920b96a3149f96947921e9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11702 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-10-11Kill lvds_num_lanesVladimir Serbinenko
Only one value would work with corresponding gma code currently (which one depends on board). Going forward, it's possible to compute which number can be used, so there is no need to keep this info around. Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11862 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-08-28edid: Use edid_mode struct to reduce redundancyDavid Hendricks
This replaces various timing mode parameters parameters with an edid_mode struct within the edid struct. BUG=none BRANCH=firmware-veyron TEST=built and booted on Mickey, saw display come up, also compiled for link,falco,peppy,rambi,nyan_big,rush,smaug [pg: extended to also cover peach_pit, daisy and lenovo/t530] Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9 Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289964 Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/11388 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: Idcd059f05523916f726b94931c2487ab028b7d72 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10409 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-19ivybridge native gfx init: Adjust state to be compatible with OPROM.Vladimir Serbinenko
My main payload is GRUB and I load SeaBIOS as secondary payload when for some reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom (SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either completely uninited gfx or some special state in gmbus and software scratch registers. Provide this state. The only alternative without this patch for such usecase is to use oprom and I'd like to avoid doing so when going my main boot path to GNU/Linux. Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10205 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-19gma/edid: Fix gma register access.Vladimir Serbinenko
0x20 was incorrectly represented as 4 * 5 while in fact it's 4 * 8 Change-Id: I6053a3baa6de0da9f1d648009353bc1fe542f81f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10237 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-08northbridge/intel/gm45/gma: Add backlight control register fieldTimothy Pearson
This allows the backlight control register to be set via devicetree.cb Change-Id: I32b42dfc1cc609fb6f8995c6158c85be67633770 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9330 Tested-by: build bot (Jenkins)
2015-03-31cbfs: remove cbfs_core.h includesAaron Durbin
Some of the files which include cbfs_core.h don't even need the header definition while others just need the cbfs API which can be obtained from cbfs.h. Change-Id: I34f3b7c67f64380dcf957e662ffca2baefc31a90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9126 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-06doxygen fixes: change @var to @param varMartin Roth
These files were trying to document the parameters, but didn't have the syntax quite right. Change the comments from @varname to @param varname as required by doxygen. Change-Id: I63662094d3f1686e3e35b61925b580eb06e72e28 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8100 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-11-11drivers/intel/gma/intel_dp.c: Fix printf type-specifierEdward O'Callaghan
'%02hx' is unsigned short, where as the argument is typed as uint8_t and so '%02hhx' is actually correct here. Found-by: Clang Change-Id: I40c48dcecf12845f4708e511236184908e90fb56 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7428 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-09-13intel/gma: consolidate vbt codeVladimir Serbinenko
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6800 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-11Move nehalem/sandy/ivy to per-device acpiVladimir Serbinenko
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6802 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-09-08Haswell/falco/peppy/slippy: continue to clean up FUI.Ronald G. Minnich
As a first step towards removing hardcodes from the FUI support, change the haswell call to i915_lightup to panel_lightup, and pass the intel_dp * as a parameter. Get rid of the scalar arguments and make them part of intel_dp. Get rid of file-scope variables and use the ones in the intel_dp struct. In falco, use functions that peppy uses. Drop slippy support for FUI, it's a dead board; if this is ok I'll remove the files next. And, incidentally, fix the broken RGBX constant and change it to BGRX. Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/174932 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6833 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-09-05Consolidate intel vga int15 hooksVladimir Serbinenko
Change-Id: I9366dded98bf15f6da44ce893dd10698ba09fd55 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6820 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-04drivers/gma: remove unused codeRonald G. Minnich
We had brought this code in from the kernel but found it best to use mainboard- or chipset specific versions. Firmware should strive to be as non-generic as possible. Change-Id: Ic1ca746cc52c3f9ea4de6895f2b32946229beada Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/172625 Tested-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 7dba0dfd25bf9e367f9e5128b15edb018e958c3a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-28Peppy/Haswell: move more support functions from mainboard to the intel i915 ↵Ronald G. Minnich
driver Move (and rename to make it clearer) the function that computes display parameters from the dpcd and edid. Change-Id: Idfbb56fd312b23c742c52abca1a34ae117a8fece Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/171366 Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com> Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 8f2b3bafee7cb05db8fae1c52fc9e1ee64e5e35d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6768 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-25intel/gma: Clarify code and use dedicated init for Google PeppyRonald G. Minnich
Peppy had some issues with FUI. We decided it was time to create peppy-specific gma.c and i915io.c files. Using yabel and the i915tool, we generated a replay attack, then interpolated against the slippy i915io.c to get something working. Also, in preparation for moving code out of the mainboard gma.c to generic driver code, we got rid of some hardcodes in the mainboard gma.c that have no business being there. The worst were the computation of gmch_[m,n] and it turns out that we had some long-standing bugs related to confusion about 'bpp'. I've killed the word bpp everywhere I could because there are at least 3 things that correspond to bpp. We now have framebuffer, pipe, and panel bpp. The names are long because I want to avoid all the mistakes we've all been making in the last year :-) Sadly, that means a lot of changes not just peppy-related, but they are simple and in a good cause. The test pattern generation is driven by a global variable in mainboard/peppy/gma.c. I've found in the past that it's very useful to have a function like this available, as one can activate it while using a jtag debugger: halt at the right place in ramstage, set the variable to 1, continue. It's not enough code to worry about always including. The last hard-codes for M and N registers are gone, and the function to set from generic intel_dp.c code works. To avoid screen trash on a dev mode boot, which we liked but nobody else did :-), we now take the time to put a pleasing background color that sort of doubles as a power LED. Rough timing is ramstage start is at 2.2, and dev setup is done at 3.3. These new platforms are depressingly slow to boot. Rom init alone is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash prompt. These CPUs are at least 10x faster and take much longer to get going. Future work, once we get this through, is to move more functions to the intel driver, and combine the mainboard i915io.c into the mainboard gma.c. That separation only existed because i915io.c was generated by a tool, and it had lots of ugliness. Most ugliness is gone. Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://chromium-review.googlesource.com/170013 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com> (cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d) snow: Fix a typo in devicetree.cb that was breaking the snow build. A typo in a recent change broke the snow build. Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171014 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 154876c126a6690930141df178485658533096d2) Squashed a fix into the initial patch and updated nehalem/gma.c to have a non-static gtt_poll. Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6657 Tested-by: build bot (Jenkins)
2014-08-13Falco/Slippy: Patch to refactor haswell/gma.c and ↵Furquan Shaikh
mainboard/google/slippy/i915io.c A large portion of documented registers have been initialized using macros. Only a few undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant calls. However, some more work is required to correctly identify which calls are not required. All the io_writes are replaced by gtt_writes. Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66204 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6600 Tested-by: build bot (Jenkins)
2014-07-29x230: Deploy VBTVladimir Serbinenko
Change-Id: Ide31a56bfdbc31cd3b87993dfb4ed8ef0107cdba Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5396 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-07-21src/drivers: Remove a trailing whitespaceElyes HAOUAS
Change-Id: If357da5d84a255e0bdf8784d559ee0941045bbd6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6309 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-08drivers: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Ie80c87c614a536cc6b0bdbf196c280b64547d3b7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6203 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-25drivers/intel/gma: Uninitialized var before if conditionEdward O'Callaghan
The variable 'wait' is used uninitialized whenever 'if' condition is false if (val & DDI_BUF_CTL_ENABLE) { ^~~~~~~~~~~~~~~~~~~~~~~~ Leading to an uninitialized use occurs here: if (wait) ^~~~ Change-Id: I7d96bf1e33b9c4312d4a0ba8276e83d17d6cd070 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6052 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-20drivers/intel/gma: Equality comparison with extraneous parenthesesEdward O'Callaghan
Spotted by Clang. Change-Id: I3e612c0fa050a09fa7e5b1cb643935b84eb2b957 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6053 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01i915_reg: Declare LVDS register values.Vladimir Serbinenko
Change-Id: If8b3578c4fa31bf9f09c0053a5cac7ebc993b634 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5319 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-09intel/gma: Remove MCH register declarations.Vladimir Serbinenko
i915_reg.h re-declares some of MCH registers as seen through MCHBAR mirror. It's not currently used and we don't want any MCH registers in GFX. Change-Id: I5fa4711fee60d64316696b7ed713013de8759b54 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5318 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04nehalem: Replace video init.Vladimir Serbinenko
Old video init just replayed the sequence. This one actually computes the values. Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5270 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04drivers/intel/gma: Add EDID retrieving functions.Vladimir Serbinenko
Change-Id: I64f2fcc5ad52d6a0188d02b28769001ada718c4f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5278 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-21Refactor code containing aux callsFurquan Shaikh
Moved a lot of code from i915io.c to intel_dp.c with specific function calls Change-Id: Ib2ed52b4f73ee0076e2dd68a26541e5bbe1366bc Reviewed-on: https://gerrit.chromium.org/gerrit/63950 Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4429 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
Depending upon the values decoded from edid, the function decides the appropriate bits to be set in flags parameter (Important for fastboot to work correctly in kernel) Change-Id: I3b0f914dc2b0fd887eb6a1f706f87b87c86ff856 Reviewed-on: https://gerrit.chromium.org/gerrit/64265 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4423 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
Also, used this attribute in the calculation of htotal and other registers Added intel_dp_* functions for m,n registers and dimension register calculations Change-Id: I99dd7156700d59b0b4c85e34c9aa1c6408c7f31a Reviewed-on: https://gerrit.chromium.org/gerrit/64001 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4422 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
Works fine with all three panels with the change of 6 bits per color. Change-Id: Ia47d152e62d1879150d8cf9a6657b62007ef5c0e Reviewed-on: https://gerrit.chromium.org/gerrit/63762 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4402 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
... based on the EDID detailed timing values for pixel_clock and link_clock. Two undocumented registers 0x6f040 and 0x6f044 correspond to link_m and link_n respectively. Other two undocumented registers 0x6f030 and 0x6f034 correspond to data_m and data_n respectively. Calculations are based on the intel_link_compute_m_n from linux kernel. Currently, the value for 0x6f030 does not come up right with our calculations. Hence, set to hard-coded value. Change-Id: I40ff411729d0a61759164c3c1098504973f9cf5e Reviewed-on: https://gerrit.chromium.org/gerrit/62915 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4381 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
The intel_ddi.c change I thought should be in but I don't see it. It just adds two functions back that we need. There are two new files for slippy annotated with comments about how it needs to evolve. That said, this code has been tested on 3 different panels. Both dev and non-dev usages work. physbase initialization to static value removed. Moved spin calls to intel_dp_* Change-Id: I0480af45c21c7dedcaff7e8be729f0eb554ec78a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61136 Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4370 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-07Add kernel-derived support functions for DDI.Ronald G. Minnich
Newer mainboards that use haswell -- and, presumably, chipsets to come -- need some support functions. Add them in the drivers/intel/gma directory. Currently, this is one file: intel_ddi.c, but more may come. Compilation of this file is controlled by INTEL_DDI, defined in the Kconfig as default n and used in the Makefile.inc Change-Id: I501ee291c0d4589925ed3e478f67106337fcad31 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60612 Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4337 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-05FUI: add intel_dp driver derived from kernel functionsRonald G. Minnich
These functions are not all used yet, but do compile and are partially used in the FUI testing. They were extracted from the 3.4 kernel using coccinnelle filters. The .c files are only compiled in if CONFIG_INTEL_DP is set. Change-Id: Id95622a75aa02b496c9ea4717cb143394a8332e3 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60245 Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4329 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05haswell: pull in the init code for FUIRonald G. Minnich
Removed two unnecessary register sets, and did the power well a bit more correctly. Also, added a register definition include file so we can used constants instead of magic numbers. We also set registers to common initialized values that are needed for FUI, VBIOS, and kernel. This set of registers appears to be an absolute bare minimum. Since we're hoping to use FUI for all chipsets from this one forward, we unconditionally do the setting here. Signed-off-by: Ronald G. Minnich <rminnich@google.com> Change-Id: Ife3f661ba010214d92b646b336f2b06645119f17 Reviewed-on: https://gerrit.chromium.org/gerrit/59988 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4328 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>