Age | Commit message (Expand) | Author |
2019-02-15 | drivers/i2c/max98373: Set default bus speed as I2C_SPEED_FAST | Furquan Shaikh |
2019-01-24 | cr50: Add probe command to poll Cr50 until DID VID is valid | Keith Short |
2019-01-23 | src/drivers: Remove needless '&' on function pointers | Elyes HAOUAS |
2018-12-07 | drivers/i2c/designware: Add soc_clock entry for 216MHz | Duncan Laurie |
2018-11-16 | src: Remove unneeded include <console/console.h> | Elyes HAOUAS |
2018-11-12 | src: Remove unneeded include "{arch,cpu}/cpu.h" | Elyes HAOUAS |
2018-11-09 | drivers/*/tpm: Add postcar target | Philipp Deppenwiese |
2018-11-01 | src: Add missing include <stdint.h> | Elyes HAOUAS |
2018-10-08 | Move compiler.h to commonlib | Nico Huber |
2018-10-08 | src: Use tabs for indentation | Elyes HAOUAS |
2018-09-16 | acpi: Call acpi_gen_writeSTA by status from device tree | Hung-Te Lin |
2018-08-14 | drivers/i2c/tpm/cr50.c: Check if TPM was read | Richard Spiegel |
2018-08-10 | drivers/i2c: Add i2c TPM support for different stages | Philipp Deppenwiese |
2018-08-10 | src/drivers: Fix typo | Elyes HAOUAS |
2018-07-30 | drivers/i2c/da7219: Allow disabling micbias-pulse feature | Daniel Kurtz |
2018-07-09 | src/{device,drivers}: Use "foo *bar" instead of "foo* bar" | Elyes HAOUAS |
2018-07-06 | google: Use proper ACPI ID for Semtech chips: STH | Gwendal Grignou |
2018-06-24 | drivers/i2c/alps: Get rid of i2c/alps driver | Furquan Shaikh |
2018-06-24 | drivers/i2c/sx9310: Check for config not being NULL before using it | Furquan Shaikh |
2018-06-22 | drivers/i2c: Add a driver for Semtech SX9310 | Enrico Granata |
2018-06-12 | drivers/i2c/generic: Ensure config is not NULL before accessing it | Furquan Shaikh |
2018-06-06 | src/driver/i2c/{generic,hid,tpm,max}: Update device name based on devicetree.cb | Naresh G Solanki |
2018-06-04 | security/tpm: Unify the coreboot TPM software stack | Philipp Deppenwiese |
2018-05-28 | drivers/i2c/max98373: update DT property names | Sathyanarayana Nujella |
2018-05-22 | src: Remove non-ascii characters | Martin Roth |
2018-05-04 | drivers/i2c/da7219: Add mclk-name property | Akshu Agrawal |
2018-05-02 | src/drivers: Add reset/enable/stop_off_ms variables to ACPI devices | Shelley Chen |
2018-04-27 | drivers/i2c/lm63: Remove unneeded headers | Elyes HAOUAS |
2018-04-27 | drivers/i2c/adm1026: Remove unneeded headers | Elyes HAOUAS |
2018-04-27 | drivers/i2c/adm1027: Remove unneeded headers | Elyes HAOUAS |
2018-04-26 | drivers/i2c/ck505: Remove unneeded headers | Elyes HAOUAS |
2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
2018-03-21 | drivers/i2c/designware: Fix indentation | Maulik V Vaghela |
2018-02-15 | drivers/i2c: Add chip driver for I/O expander PCA9538 | Werner Zeh |
2018-02-14 | drivers/i2c/designware: Remove spurious word ("familuar") | Jonathan Neuschäfer |
2018-02-10 | drivers/i2c/da7219: Allow GPIO based interrupt | Daniel Kurtz |
2018-02-02 | drivers/i2c/designware: conform to controller restrictions | Aaron Durbin |
2018-02-01 | drivers/i2c/designware: Unset IC_ENABLE when setting target address | Chris Ching |
2018-01-30 | drivers/i2c/tpm: Add irq_gpio support to tpm. | Justin TerAvest |
2018-01-25 | drivers/i2c/designware: reduce API complication for bus config | Aaron Durbin |
2018-01-24 | drives/i2c/designware: incorporate device_operations support | Aaron Durbin |
2018-01-24 | drivers/i2c/designware: namespace soc functions | Aaron Durbin |
2018-01-24 | device/i2c_bus: allow i2c_bus and i2c_simple to coexist | Aaron Durbin |
2018-01-23 | drivers/i2c/max98373: Add driver for generating device in SSDT | N, Harshapriya |
2018-01-18 | security/tpm: Change TPM naming for different layers. | Philipp Deppenwiese |
2018-01-18 | security/tpm: Move tpm TSS and TSPI layer to security section | Philipp Deppenwiese |
2017-12-22 | ic2/designware: Move Intel i2c logic to shared driver | Chris Ching |
2017-11-22 | drivers/i2c/tpm/cr50: Simplify and increase init delay to 30 seconds | Duncan Laurie |
2017-11-09 | drivers/i2c/tpm/cr50: Increase init delay to 30 seconds | Duncan Laurie |
2017-11-07 | src: Fix all Siemens copyrights | Mario Scheithauer |
2017-09-26 | Use stopwatch_wait_until_expired where applicable | Jonathan Neuschäfer |
2017-09-14 | device: acpi_name() should take a const struct device | Aaron Durbin |
2017-09-06 | driver/i2c/max98927: Add imon and vmon params | Harsha Priya |
2017-08-30 | acpigen: Add stop gpio control to power resource | Furquan Shaikh |
2017-08-30 | drivers/i2c/ck505: Add generic driver to configure clockgen | Arthur Heymans |
2017-08-30 | drivers/i2c/generic: Support additional device properties | Duncan Laurie |
2017-08-18 | drivers/i2c/rx6110sa: Drop I2C interface arbitration | Nico Huber |
2017-08-18 | include/device: Split i2c.h into three | Nico Huber |
2017-08-14 | i2c: Move to Linux like `struct i2c_msg` | Nico Huber |
2017-08-09 | drivers/i2c: Add driver for rt5663 codec | Duncan Laurie |
2017-08-08 | rx6110sa: Make sure that VLF bit will be cleared | Werner Zeh |
2017-07-28 | src/drivers: Fix checkpatch warning: no spaces at the start of a line | Martin Roth |
2017-07-13 | Rename __attribute__((packed)) --> __packed | Stefan Reinauer |
2017-06-30 | rx6110sa: Add a software reset sequence in case of power loss | Werner Zeh |
2017-06-09 | rx6110sa: Add more chip configuration options to chip | Werner Zeh |
2017-05-31 | rx6110sa: Add possibility to use both I2C and SMBus for the RTC | Werner Zeh |
2017-05-11 | drivers/i2c: Add new driver for RTC type RX6110 SA | Mario Scheithauer |
2017-04-24 | drivers/i2c/tpm: Remove vendor.irq | Daniel Kurtz |
2017-04-24 | drivers/i2c/tpm/cr50: Use tis_plat_irq_status for Cr50 IRQ status | Daniel Kurtz |
2017-04-24 | drivers/i2c/tpm: Hide ACPI on unsupported platforms | Patrick Rudolph |
2017-04-13 | drivers/spi/tpm: Clean up SPI TPM driver | Furquan Shaikh |
2017-04-03 | drivers/i2c/tpm: remove 1260 byte buffer from stack | Aaron Durbin |
2017-04-03 | drivers/i2c/tpm: remove unused variable in tpm_transmit() | Aaron Durbin |
2017-04-03 | drivers/i2c/tpm: remove unused types from tpm.h | Aaron Durbin |
2017-03-28 | Remove libverstage as separate library and source file class | Julius Werner |
2017-03-16 | i2c/generic: Add support for GPIO IRQ | Duncan Laurie |
2017-03-16 | drivers/i2c/tpm: Add support for Atmel TPM (AT97SC3204) | Lee Leahy |
2017-03-16 | drivers/i2c/tpm: Add TPM (TIS) debugging support | Lee Leahy |
2017-03-15 | drivers/i2c/tpm: Fix issues detected by checkpatch | Lee Leahy |
2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
2017-02-19 | acpi_device: Move power resource function to generic code | Duncan Laurie |
2017-02-17 | driver/i2c/max98927: add i2c driver for Maxim 98927 codec | Rizwan Qureshi |
2017-01-29 | i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI | Furquan Shaikh |
2017-01-03 | i2c/tpm: Ignore 0xFF bytes for status and burstCount | Julius Werner |
2016-12-16 | drivers/i2c/generic: Allow mainboards to export reset and enable GPIOs | Furquan Shaikh |
2016-12-16 | drivers/i2c/hid: Add generic I2C HID driver | Duncan Laurie |
2016-12-15 | drivers/i2c: Pass in i2c_generic_config into i2c_generic_fill_ssdt | Furquan Shaikh |
2016-12-15 | pcf8523: Fix wrong initialization of several registers | Werner Zeh |
2016-11-16 | drivers/i2c/alps: Add support for ALPS Touchpad driver | Barnali Sarkar |
2016-11-10 | drivers/i2c/wacom: Make the driver more generic | Furquan Shaikh |
2016-11-09 | google/pyro: Update WACOM touchscreen ACPI _HID | Janice Li |
2016-11-07 | drivers/i2c/tpm/cr50: Increase IRQ timeout | Duncan Laurie |
2016-10-26 | drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driver | Furquan Shaikh |
2016-10-25 | drivers/i2c/generic: Re-factor SSDT generation code | Furquan Shaikh |
2016-10-25 | drivers/i2c/generic: Enable support for adding PowerResource for device | Furquan Shaikh |
2016-10-24 | drivers/i2c/generic: Return correct name for acpi_name | Furquan Shaikh |
2016-10-07 | src/drivers: Remove whitespace after memcpy & memset | Elyes HAOUAS |
2016-10-07 | Gale: Fix the orange color to match the UX doc | Suresh Rajashekara |
2016-10-06 | i2c/ww_ring: LED changes as per UX team feedback. | Suresh Rajashekara |
2016-10-06 | i2c/ww_ring: Change LED configuration for Gale EVT3 | Suresh Rajashekara |