summaryrefslogtreecommitdiff
path: root/src/drivers/i2c
AgeCommit message (Collapse)Author
2017-11-09drivers/i2c/tpm/cr50: Increase init delay to 30 secondsDuncan Laurie
In case the TPM is doing a long crypto operation the initial probe could be very delayed. Rather than end up in recovery make the delay long enough to accommodate the (current) long crypto times. BUG=b:65867313, b:68729265 TEST=Verified that Soraka no longer hangs during EC reboot test. Change-Id: I3bccff70e001dfc065c24be8ad34ef239a144db1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07src: Fix all Siemens copyrightsMario Scheithauer
Some Siemens copyright entries incorrectly contain a dot at the end of the line. This is fixed with this patch. Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-14device: acpi_name() should take a const struct deviceAaron Durbin
There's no reason to mutate the struct device when determining the ACPI name for a device. Adjust the function pointer signature and the respective implementations to use const struct device. Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06driver/i2c/max98927: Add imon and vmon paramsHarsha Priya
This change list adds imon and vmon slot numbers as params for Maxim 98927 driver. These values are looked up in the kernel driver to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I21d72ba91af83782587f11018b2d1d1c8d4f676c Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-30acpigen: Add stop gpio control to power resourceFurquan Shaikh
There is at least one I2C device (being used by Soraka) that has 3 controls -- enable, reset and stop. If the stop gpio is not put into the right state when turning off the device in suspend mode, then it causes leakage. Thus, we need control in power resource to be able to stop the device when entering suspend state. BUG=b:64987428 TEST=Verified on soraka that touchscreen stop is correctly configured on suspend. Change-Id: Iae5ec7eb3972c5c7f80956d60d0d3c321bbefb0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21249 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30drivers/i2c/generic: Support additional device propertiesDuncan Laurie
Add support for providing additional free form device properties via devicetree in order to make this driver suitable for kernel drivers that need additional board-specific device properties. This currently allows adding up to 10 additional properties to a device. BUG=b:63413023 TEST=manual testing to ensure that newly added properties are in SSDT Change-Id: I2b8ceb208f4aba01053746547def6d07c8f8f3a2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
Change-Id: Ib31e77eec639c231520198c0b978d6c3c1eadaed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-09drivers/i2c: Add driver for rt5663 codecDuncan Laurie
This commit adds a new driver for the RT5663 codec to use instead of the generic i2c driver. Since the kernel needs additional driver-specific device properties we need a BIOS driver that can provide those properties. The kernel driver devicetree properties for this codec are at: linux/Documentation/devicetree/bindings/sound/rt5663.txt This was tested by booting and verifying the generated SSDT contains the expected device properties in _DSD. Scope (\_SB.PCI0.I2C4) { Device (RT53) { Name (_HID, "10EC5663") Name (_UID, Zero) Name (_DDN, "Realtek RT5663 Codec") Method (_STA, 0, NotSerialized) { Return (0x0F) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x0013, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C4", 0x00, ResourceConsumer) GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer) { 0x0051 } }) Name (_DSD, Package (0x02) { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package (0x05) { Package (0x02) { "irq-gpios", Package (0x04) { \_SB.PCI0.I2C4.RT53, Zero, Zero, Zero } }, Package (0x02) { "realtek,dc_offset_l_manual", 0x00FFD160 }, Package (0x02) { "realtek,dc_offset_r_manual", 0x00FFD1C0 }, Package (0x02) { "realtek,dc_offset_l_manual_mic", 0x00FF8A10 }, Package (0x02) { "realtek,dc_offset_r_manual_mic", 0x00FF8AB0 } } }) } } Change-Id: I3425fcbe13c9a5987fc91086d283a86db55c0819 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-08rx6110sa: Make sure that VLF bit will be clearedWerner Zeh
Ensure that the VLF bit will be cleared after a power loss event even if the stopwatch has expired before the code to clear the bit is reached. Change-Id: Ib2cfdabf4cd4df834395d6a102c6ae70568e71db Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-07-28src/drivers: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
This excludes files which are mostly spaces, which I felt should be handled separately. Change-Id: I33043a3090e2fc6e9d2fd81e8a5e46fb6cb0aa35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-30rx6110sa: Add a software reset sequence in case of power lossWerner Zeh
According to the datasheet the RTC needs a power rising slope of no more than 100µs/V to ensure a correct power-on reset. If the mainboard that hosts the RTC cannot guarantee this, a software reset sequence is needed in the case where the battery was drained completely. As the rising slope of the power supply depends on so many parameters and is highly mainboard specific, refactor the initialization code to perform a software reset every time a power loss event is recognized by the RTC. Change-Id: If64d672e51667523058041bd00e1e50ac047143d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09rx6110sa: Add more chip configuration options to chipWerner Zeh
The RTC RX6110SA has several configuration options which might be interesting to set. To make this setup independent of the driver itself but let it still be configurable on mainboard level, add more configuration options to the chip driver. Change-Id: I7f8b2aa7cd001a887f271be36f655e10e60e778b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31rx6110sa: Add possibility to use both I2C and SMBus for the RTCWerner Zeh
The driver for the RTC RX6110SA is designed to be used with I2C bus. This patch adds the possibility to use SMBus operations to access the RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It is not enabled per default so that I2C will be used. One can set this switch on board level to use SMBus instead. Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19978 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-11drivers/i2c: Add new driver for RTC type RX6110 SAMario Scheithauer
This driver enables the usage of the external RTC chip RX6110 SA (http://www5.epsondevice.com/en/products/i2c/rx6110sab.html) which is connected to the I2C bus. The I2C address of this device is fixed. One can change parameters in the device tree so that the used setup can be adapted to match the configuration of the device on the mainboard. Change-Id: I1290a10c2d5ad76a317c99c8b92a013309a605d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-04-24drivers/i2c/tpm: Remove vendor.irqDaniel Kurtz
The vendor.irq field was originally intended for use as the TPM 1.2 "command complete" interrupt. However, all actual coreboot tpm drivers and hardware use the vendor.status method of checking command completion instead, and this irq field is not used. Let's just remove this unused functionality to simplify the code. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). Change-Id: I994c5bfbd18124af9cb81d9684117af766ab0124 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19396 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24drivers/i2c/tpm/cr50: Use tis_plat_irq_status for Cr50 IRQ statusDaniel Kurtz
The Cr50 TPM uses an IRQ to provide a "status" signal used for hand-shaking the reception of commands. Real IRQs are not supported in firmware, however firmware can still poll interrupt status registers for the same effect. Commit 94cc485338a3 ("drivers/i2c/tpm/cr50: Support interrupts for status") added support for the Cr50 driver on X86 platforms to use a KConfig file to supply an IRQ which it would poll using acpi_get_gpe. If the IRQ is not supplied, the Cr50 driver inserts a 20 ms wait. Unfortunately this doesn't work so well when using the i2c connected Cr50 on ARM platforms. Luckily, a more generic implementation to allow a mainboard to supply a Cr50 IRQ status polling function was solved for SPI connected Cr50s by commit 19e3d335bddb ("drivers/spi/tpm: using tpm irq to sync tpm transaction"). Let's refactor the i2c c50 driver to use this same approach, and change eve and reef boards to make use of DRIVER_TPM_TIS_ACPI_INTERRUPT for specifying the TPM flow control interrupt. This essentially reverts these two commits: 48f708d199 drivers/i2c/tpm/cr50: Initialize IRQ status handler before probe 94cc485338 drivers/i2c/tpm/cr50: Support interrupts for status And ports this commit to i2c/tpm/cr50: 19e3d335bd drivers/spi/tpm: using tpm irq to sync tpm transaction As a side effect the tpm_vendor_specific IRQ field goes back to its original usage as the "TPM 1.2 command complete" interrupt, instead of being repurposed to hold the flow control IRQ. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). Change-Id: I004329eae1d8aabda51c46b8504bf210484782b4 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19363 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24drivers/i2c/tpm: Hide ACPI on unsupported platformsPatrick Rudolph
Depend on I2C_TPM to prevent showing the menu entry on systems that do not have an I2C TPM installed. Change-Id: I7cd647c9c7e9721eab96ab64b844a882f156ee68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19374 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-13drivers/spi/tpm: Clean up SPI TPM driverFurquan Shaikh
1. Move common TIS macros to include/tpm.h. 2. Use common TIS macros while referring to status and access registers. 3. Add a new function claim_locality to properly check for required access bits and claim locality 0. BUG=b:36873582 Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19213 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-03drivers/i2c/tpm: remove 1260 byte buffer from stackAaron Durbin
The tis.c module is needlessly copying data to/from a 1260 byte buffer on the stack. Each device's transport implementation (cr50.c or tpm.c) maintains its own buffer, if needed, for framing purposes. Therefore, remove the duplicated buffer. BUG=b:36598499 Change-Id: I478fb57cb65509b5d74bdd871f1a231f8080bc2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19061 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/i2c/tpm: remove unused variable in tpm_transmit()Aaron Durbin
The 'ordinal' variable is not used. Remove it. BUG=b:36598499 Change-Id: I015a6633c0951980658b3c879e48bc84d604d62e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19060 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-03drivers/i2c/tpm: remove unused types from tpm.hAaron Durbin
There are unused structures/types in the tpm.h header file. Remove them. BUG=b:36598499 Change-Id: Iddc147640dcec70e80791846eb46298de1070672 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19059 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-28Remove libverstage as separate library and source file classJulius Werner
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are linked directly into the bootblock or the romstage. However, they're still compiled with a separate "libverstage" source file class, linked into an intermediate library and then linked into the final destination stage. There is no obvious benefit to doing it this way and it's unclear why it was chosen in the first place... there are, however, obvious disadvantages: it can result in code that is used by both libverstage and the host stage to occur twice in the output binary. It also means that libverstage files have their separate compiler flags that are not necessarily aligned with the host stage, which can lead to weird effects like <rules.h> macros not being set the way you would expect. In fact, VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86 because their libverstage code that gets compiled into the romstage sets ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to run pre-migration. This patch resolves these problems by removing the separate library. There is no more difference between the 'verstage' and 'libverstage' classes, and the source files added to them are just treated the same way a bootblock or romstage source files in configurations where the verstage is linked into either of these respective stages (allowing for the normal object code deduplication and causing those files to be compiled with the same flags as the host stage's files). Tested this whole series by booting a Kevin, an Elm (both with and without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode. Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18302 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-16i2c/generic: Add support for GPIO IRQDuncan Laurie
Add support for using GPIO IRQ instead of PIRQ with an I2C device. This allows a device to use an edge triggered interrupt that will trigger on both high and low transitions. The _DSD method for describing these GPIOs has a field for 'active low' which is supposed to be 1 if the pin is active low, otherwise is zero. The value in here doesn't mean too much for GpioInt() as those will end up using the value from GpioInt() when it actually requests the interrupt. BUG=b:35581264 BRANCH=none TEST=test on Eve board that codec IRQ can be delcared as GPIO IRQ Change-Id: I02c64c7fc28dc2d608ad40db889c7242892f16db Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18835 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-16drivers/i2c/tpm: Add support for Atmel TPM (AT97SC3204)Lee Leahy
The I2C interface for the Atmel AT97SC3204 TPM varies greatly from the existing I2C TPM support. The Atmel part just passes the commands and responses from the TIS layer across the I2C interface. TEST=Build and run on Galileo Gen2 with Crypto Shield and vboot enabled Change-Id: Ib2ef0ffdfc12b2fc11fe4c55b6414924d4b676dd Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18800 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-16drivers/i2c/tpm: Add TPM (TIS) debugging supportLee Leahy
Add debugging support for the TIS transactions for the I2C TPM chips. TEST=Build and run on reef Change-Id: Ibc7e26fca781316d625f4da080f34749f18e4f9b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-15drivers/i2c/tpm: Fix issues detected by checkpatchLee Leahy
Fix the following warnings detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: braces {} are not necessary for single statement blocks WARNING: Unnecessary parentheses - maybe == should be = ? WARNING: line over 80 characters WARNING: missing space after return type TEST=Build and run on Galileo Gen2 Change-Id: I56f915f6c1975cce123fd38043bad2638717d88c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18832 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20drivers/i2c: Use I2C HID driver for wacom devicesFurquan Shaikh
Wacom I2C driver does the same thing as I2C HID driver, other than defining macros for Wacom HID. Instead of maintaining two separate drivers providing the same functionality, update all wacom devices to use generic I2C HID driver. BUG=None BRANCH=None TEST=Verified that ACPI nodes for wacom devices are unchanged. Change-Id: Ibb3226d1f3934f5c3c5d98b939756775d11b792c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18401 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-19acpi_device: Move power resource function to generic codeDuncan Laurie
Move the function that adds a power resource block from i2c/generic to the acpi device code at src/arch/x86/acpi_device.c so it can be used by more drivers. BUG=chrome-os-partner:61233 TEST=verify SSDT table generation is unchanged Change-Id: I0ffb61a4f46028cbe912e85c0124d9f5200b9c76 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18391 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-17driver/i2c/max98927: add i2c driver for Maxim 98927 codecRizwan Qureshi
Maxim 98927 kernel driver requires entries in the ACPI SSDT table, add a SSDT generator as part of this driver. BUG=chrome-os-partner:62051 BRANCH=None TEST=After boot, dump and verify that the generated SSDT ACPI table has the required entries. Change-Id: Ic2d4d8449288bc00d085852220b2e1e7a208e9ef Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: M Naveen <naveen.m@intel.com> Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://review.coreboot.org/18211 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-01-29i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPIFurquan Shaikh
Linux kernel expects that power management with ACPI should always be handled using PowerResource. However, some kernel drivers (e.g. ELAN touchscreen) check to see if reset gpio is passed in by the BIOS to decide whether the device loses power in suspend. Thus, until the kernel has a better way for drivers to query if device lost power in suspend, we need to allow passing in of GPIOs via _CRS as well as exporting PowerResource to control power to the device. Update mainboards to export reset GPIO as well as PowerResource for ELAN touchscreen device. BUG=chrome-os-partner:62311,chrome-os-partner:60194 BRANCH=reef TEST=Verified that touchscreen works on power-on as well as after suspend-resume. Change-Id: I3409689cf56bfddd321402ad5dda3fc8762e6bc6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18238 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-03i2c/tpm: Ignore 0xFF bytes for status and burstCountJulius Werner
We've found that the SLB9645 TPM sometimes seems to randomly start returning 0xFF bytes for all requests. The exact cause is yet unknown, but we should try to write our TIS code such that it avoids bad interactions with this kind of response (e.g. any wait_for_status() immediately succeeds because all "status bits" are set in the response). At least for status and burstCount readings we can say for sure that the value is nonsensical and we're already reading those in a loop until we get valid results anyway, so let's add code to explicitly discount 0xFF bytes. BRANCH=oak BUG=chrome-os-partner:55764 TEST=None Change-Id: I934d42c36d6847a22a185795cea49d282fa113d9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/420470 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/18006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16drivers/i2c/generic: Allow mainboards to export reset and enable GPIOsFurquan Shaikh
Add power management type config option that allows mainboards to either: 1. Define a power resource that uses the reset and enable gpios to power on and off the device using _ON and _OFF methods, or 2. Export reset and enable GPIOs in _CRS and _DSD so that the OS can directly toggle the GPIOs as required. GPIO type needs to be updated in drivers_i2c_generic_config to use acpi_gpio type so that it can be used for both the above cases. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that elan touchscreen works fine on reef using exported GPIOs. Change-Id: I4d76f193f615cfc4520869dedc55505c109042f6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17797 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-16drivers/i2c/hid: Add generic I2C HID driverDuncan Laurie
Add a generic I2C-HID driver for these types of devices that do not need extra functionality. This allows a new device to be added without having to write a new driver. The i2c-hid PNP0C50 is automatically added as the _CID for the device in the ACPI Device. BUG=chrome-os-partner:58666 TEST=used on eve to describe a new i2c-hid touch controller Change-Id: I94e9531a72f9bf1d6b3ade362b88883b21b83d0a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17856 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-15drivers/i2c: Pass in i2c_generic_config into i2c_generic_fill_ssdtFurquan Shaikh
Remove any assumptions required for the drivers using i2c_generic to have drivers_i2c_generic_config structure at the start of the driver config. Instead pass in a pointer to drivers_i2c_generic_config from the calling driver. Change-Id: I51dc4cad1c1f246b51891abf7115a7120e87b098 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17857 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-15pcf8523: Fix wrong initialization of several registersWerner Zeh
In the case where the RTC is initialized after the battery is completely drained the bits for power_mode and cof_selection are set up with wrongly applied masks. In the case where the RTC is re-initialized again with no power-loss after the last initialization the bits for cap_sel, power_mode and cof_selection are not shifted to the right position. Both errors lead to a wrong initialization of the RTC and in turn to a way larger current consumption (instead of 120 nA the RTC current rises to over 2 µA). This patch fixes both errors and the current consumption is in the right range again. TEST=booted mc_bdx1 and verified current consumption of RTC Change-Id: I8594f6ac121a175844393952db2169dbc5cbd2b2 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/17829 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16drivers/i2c/alps: Add support for ALPS Touchpad driverBarnali Sarkar
Add support for I2C ALPS Touchpad Device Driver. BUG=none BRANCH=none TEST=Build and booted successfully on KBL RVP and Touchpad is working Change-Id: I78b77bd7c4694ccf61260724f593bd59545c70e6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17390 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07drivers/i2c/tpm/cr50: Increase IRQ timeoutDuncan Laurie
Increase the IRQ timeout to prevent issues if there is a delay in the TPM responding to a command. Split the no-IRQ case out so it doesn't suffer unnecessarily. BUG=chrome-os-partner:59191 TEST=suspend/resume testing on eve board Change-Id: I1ea7859bc7a056a450b2b0ee32153ae43ee8699f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17204 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17092 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Re-factor SSDT generation codeFurquan Shaikh
1. Export i2c_generic_fill_ssdt to allow other device-specific i2c drivers to share and re-use the same code for generating AML code for SSDT. In order to achieve this, following changes are required: a. Add macro I2C_GENERIC_CONFIG that defines a structure with all generic i2c device-tree properties. This macro should be placed by the using driver at the start of its config structure. b. Accept a callback function to add any device specific information to SSDT. If generic driver is used directly by a device, callback would be NULL. Other devices using a separate i2c driver can provide a callback to add any properties to SSDT. 2. Allow device to provide _CID. BUG=chrome-os-partner:57846 Change-Id: I3a0054e22b81f9d6d407bef417eae5e9edc04ee4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17089 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Enable support for adding PowerResource for deviceFurquan Shaikh
Add support to allow a device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: 1. Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. 2. Reset delay - Delay after reset GPIO is de-asserted (default 0). 3. Enable GPIO - Optional, GPIO to enabled device. 4. Enable delay - Delay after enable GPIO is asserted (default 0). BUG=chrome-os-partner:55988 Change-Id: Ieb2dd95fc1f555f5de66f3dda425172ac5b75dad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17081 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-24drivers/i2c/generic: Return correct name for acpi_nameFurquan Shaikh
Return config->name if it is not NULL. BUG=chrome-os-partner:55988 Change-Id: I9ae229949b73de6f991383daae8d962d6cf457a7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17077 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-07src/drivers: Remove whitespace after memcpy & memsetElyes HAOUAS
Change-Id: If79eb706b6d44f7c34dfe31a1545f5850870b334 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16866 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07Gale: Fix the orange color to match the UX docSuresh Rajashekara
UX Doc = go/gale-hw-ui This color wasn't changed earlier as the change wasn't done in the OS also. However, since we cannot change this later in FW (but OS can change anytime), I am making this change after discussing with the UX team. BUG=b:31501528, b:31633562 TEST=Change the device state to 'recovery mode' to observe the new color. BRANCH=none Change-Id: Ia91f14eb77492095cb41a9de0bb9790e72aa4851 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36a3d8c6eabbc0b23d0a15d5bddc5ed3bdeebe70 Original-Change-Id: I88768b94cf91804a6005e44b1a168e059698ec4b Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/388206 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16767 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: LED changes as per UX team feedback.Suresh Rajashekara
Colors and patterns as defined by the UX team BUG=b:31501528 TEST=Move the device to different states in FW using rec and dev button and verify the colors BRANCH=None Change-Id: I66d41a54590cd3ce4e5202c7cfa890f462fe195e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 703559d5dddaeeb7d435d6cadbb2009a1b7a76c8 Original-Change-Id: I95ab1fa59b483396ff1498a28f1ee98ac08d02d7 Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387258 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: Change LED configuration for Gale EVT3Suresh Rajashekara
Gale EVT3 has only one LED controller (earlier we had 2). Remove the support for the second controller and also the corresponding microcode. The color values used are the same as onHub (Arkham to be specific). BUG=b:30890905 TEST=Move the device to different states manually by appropriate actions (like dev mode, rec mode etc) and observe the different colors. BRANCH=None Change-Id: I853035610ea7ea7c8d29c30d2de13c9e2e786b2b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 593905d2d69daa7482318aa5f5c5cd7cf984043e Original-Change-Id: If8f22abd605faac6f6215ef600041740ce15ea0c Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/370821 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16697 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-05drivers/i2c/tpm/cr50: Initialize IRQ status handler before probeDuncan Laurie
Move the setup of the IRQ status handler so it will be set up properly before the early probe happens. BUG=chrome-os-partner:53336 Change-Id: I4380af1233d2a252899459635a3cb69ca196088d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16861 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-28drivers/i2c/generic: Add config for marking device as probedDuncan Laurie
Add a config option to the generic I2C device driver to indicate to the OS that this device should be probed before being added. This can be used to provide ACPI device instantiations to devices that may not actually exist on the board. For example, if multiple trackpad vendors are supported on the same board they can both be described in ACPI and the OS will probe the address and load the driver only if the device responds to the probe at that address. BUG=chrome-os-partner:57686 Change-Id: I22cffb4b15f25d97dfd37dc58bca315f57bafc59 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: Ic8f805159650c45382cacac8840450a1f8b4d7a1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16672 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: Ie2dfb7ede1bcda0e77070df945c47c1428115907 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16668 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifdcb3be0036b2c02bfbd1bcd326e9519d3726ee0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: I826a7f024f8d137453af86ba920e0a3a734f7349 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16666 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: Ia396fc48b8fe6e56e7071db9d74561de02b5b50e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16665 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: I6f9f71d501b60299edad4b16cc553a85391a1866 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16664 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: I3b62b680773d23cc5a7d2217b9754c6c28bccfa7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16663 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: Ie749f13562be753293448fee2c2d643797bf8049 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16662 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19Revert "drivers/i2c/tpm: Move common variables to header"Duncan Laurie
This reverts commit 64df72e8e2d1c086705325533767ca5e201e842a.
2016-09-19Revert "drivers/i2c/tpm: Split cr50 driver from main driver"Duncan Laurie
This reverts commit c565f9910707b91fcc7a27bab28806e558bb474d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Reduce max buffer size"Duncan Laurie
This reverts commit 97a2a1ece152b6d40a524361721405b77c37959d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up timeouts"Duncan Laurie
This reverts commit 93c778688f0bf2f90334505a3082a2cd4ce1623a.
2016-09-19Revert "drivers/i2c/tpm/cr50: Rename i2c read/write functions"Duncan Laurie
This reverts commit 6f5ceb26b9b3e1455ebbd6192e1d2c832bddc77e.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up locality functions"Duncan Laurie
This reverts commit 557e1a729a9ca89e814220b6203b7ac0dc446913.
2016-09-19Revert "drivers/i2c/tpm/cr50: Improve data handling and function names"Duncan Laurie
This reverts commit 1241e7db55aff313e56bf4546d969c11368b08a2.
2016-09-19Revert "drivers/i2c/tpm/cr50: Support interrupts for status"Duncan Laurie
This reverts commit a5e419c51187d24818f056327746a18676fe3a20.
2016-09-19drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: I9f78f520fd089cb4471d8826a8cfecff67398bf8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: I7e3912fb8d8c6ad17d1af2d2a7189bf7c0c52c8e Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifa1445224b475aec38c2ac56e15cb7ba7fcd21ea Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: Ib4a68ce1b3a83ea7c4bcefb9c6f002f6dd4aac1f Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: I77fdd7ea646b8b2fef449f07e3a08bcce174fe8b Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: Ia88facca607f3fd5072d0d986323fde075f15855 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: Ia9a65e72519b95f5739e3b7a16b9c2431d64ebe2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: I0febe98620d0ddd4ec6b46cd3073e48c12926266 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-14drivers/i2c/tpm: Clean up handling of command readyDuncan Laurie
The TPM driver was largely ignoring the meaning of the command ready bit in the status register, instead just arbitrarily sending it at the end of every receive transaction. Instead of doing this have the command ready bit be set at the start of a transaction, and only clear it at the end of a transaction if it is still set, in case of failure. Also the cr50 function to wait for status and burst count was not waiting the full 2s that the existing driver does so that value is increased. Also, during the probe routine a delay is inserted after each status register read to ensure the TPM has time to actually start up. Change-Id: I1c66ea9849e6be537c7be06d57258f27c563c1c2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16591 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-08drivers/i2c/tpm: Fix early TPM probeDuncan Laurie
The early TPM probe was done directly in tis.c ignoring the lower layer that provides appropriate access to the chip. Move this into a tpm_vendor_probe() function so it can use iic_tpm_read() with all of the built-in delays and semantics instead of calling i2c_readb() directly from the wrong layer. This fixes early init failures that were seen with the cr50 i2c tpm on the reef mainboard. Change-Id: I9bb3b820d10f6e2ea24c57b90cf0edc813cdc7e0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Fix error handling for tis structure not initializedDuncan Laurie
If the TPM completely fails to respond then the vendor structure may not have assigned handlers yet, so catch that case and return error so the boot can continue to recovery mode instead of asserting over and over. Change-Id: If3a11567df89bc73b4d4878bf89d877974044f34 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16416 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Add support for generating ACPI tableDuncan Laurie
Add code to generate an ACPI descriptor for an I2C TPM based on the device as described in devicetree.cb. This currently requires the devicetree to provide the HID, since we don't currently talk to the TPM in ramstage and I didn't want to add yet another init path for it here. This was tested on a reef board to ensure that the device is described properly in the SSDT. Change-Id: I43d7f6192f48e99a4074baa4e52f0a9ee554a250 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16397 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06drivers/i2c/tpm: Add support for cr50 TPMDuncan Laurie
Add support for the cr50 TPM used in apollolake chromebooks. This requires custom handling due to chip limitations, which may be revisited but are needed to get things working today. - timeouts need to be longer - must use the older style write+wait+read read protocol - all 4 bytes of status register must be read at once - same limitation applies when reading burst count from status reg - burst count max is 63 bytes, and burst count behaves slightly differently than other I2C TPMs - TPM expects the host to drain the full burst count (63 bytes) from the FIFO on a read Luckily the existing driver provides most abstraction needed to make this work seamlessly. To maximize code re-use the support for cr50 is added directly instead of as a separate driver and the style is kept similar to the rest of the driver code. This was tested with the cr50 TPM on a reef board with vboot use of TPM for secdata storage and factory initialization. Change-Id: I9b0bc282e41e779da8bf9184be0a11649735a101 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16396 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-06drivers/i2c/tpm: Allow sleep durations to be set by the chipDuncan Laurie
Allow the sleep durations used by the driver to be set by the specific chip so they can be tuned appropriately. Since we need to read the chip id to know the values use very conservative defaults for the first command and then set it to the current values by default. Change-Id: Ic64159328b18a1471eb06fa8b52b589eec1e1ca2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16395 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-06drivers/i2c/tpm: Make driver safe for use in x86 pre-ramDuncan Laurie
Use CAR accessors where needed for accessing static data. In some cases this required some minor restructuring to pass in a variable instead of use a global one. For the tpm_vendor_init the structure no longer has useful defaults, which nobody was depending on anyway. This now requires the caller to provide a non-zero address. Tested by enabling I2C TPM on reef and compiling successfully. Change-Id: I8e02fbcebf5fe10c4122632eda1c48b247478289 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16394 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-02i2c/w83795: Fix chip type messagePatrick Georgi
(val & 4) == 1 is always false. Since val & 4 is either zero or non-zero, just drop the second test (for "== 1"). Validated against the data sheet that this is really the right register, bit and value. Change-Id: I627df9a9b4fddfff486689e405f52a3b54135eef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1241864 Reviewed-on: https://review.coreboot.org/16009 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31src/drivers: Capitalize CPU, RAM and ACPIElyes HAOUAS
Change-Id: I720469ea1df75544f5b1e0cab718502d8a9cf197 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15983 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28i2c/ww_ring: Add ww_ring files to ramstageFurquan Shaikh
These files are required by storm and gale boards for enabling elog support in ramstage. BUG=chrome-os-partner:55639 Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-14drivers/i2c: Add new driver for RTC type PCF8523Werner Zeh
This driver enables the usage of an external RTC chip PCF8523 which is connected to the I2C bus. The I2C address of this device is fixed. One can change parameters in device tree so that the used setup can be adapted in device tree to match the configuration of the device on the mainboard. Change-Id: I2d7e161c9e12b720ec4925f1acfd1dd8ee6ee5f5 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15641 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-08drivers/i2c/da7219: Add driver for generating device in SSDTDuncan Laurie
Add a device driver to generate the device and required properties into the SSDT. This driver uses the ACPI Device Property interface to generate the required parameters into the _DSD table format expected by the kernel. This was tested on the reef mainboard to ensure that the SSDT contained the equivalent parameters that are provided by the current DSDT object. Change-Id: Ia809e953932a7e127352a7ef193974d95e511565 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15538 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08acpi: Change device properties to work as a treeDuncan Laurie
There is a second ACPI _DSD document from the UEFI Forum that details how _DSD style tables can be nested, creating a tree of similarly formatted tables. This document is linked from acpi_device.h. In order to support this the device property interface needs to be more flexible and build up a tree of properties to write all entries at once instead of writing each entry as it is generated. In the end this is a more flexible solution that can support drivers that need child tables like the DA7219 codec, while only requiring minor changes to the existing drivers that use the device property interface. This was tested on reef (apollolake) and chell (skylake) boards to ensure that there was no change in the generated SSDT AML. Change-Id: Ia22e3a5fd3982ffa7c324bee1a8d190d49f853dd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15537 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23kconfig: allow various tpm type and interface permutationsVadim Bendebury
Until now it was assumed that all TPM devices were of the same type (TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs and all other boards had I2C connected TPMs. With the advent of TPM2 specification there is a need to be able to configure different combinations of TPM types (TPM or TPM2) and interfaces (LPC, I2C and SPI). This patch allows to do it. Picking Chrome OS still assumes that the board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's Kconfig will trigger including of TPM2 instead. MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding SPI_TPM to the board config switches interface choice to SPI, and if neither of the two is defined, the interface is assumed to be I2C. BRANCH=none BUG=chrome-os-partner:50645 TEST=verified that none of the generated board configurations change as a result of this patch. With the rest of the stack in place it is possible to configure different combinations of TPM types and interfaces for ARM and x86 boards. Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1 Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349850 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15294 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-22drivers/i2c/generic: Fix compile failureDuncan Laurie
This variable name was changed in chip.h but not the consumer and it was submitted before it was caught. Change-Id: I7c492b588b2fd854a9eeac36029a46da324a7b1b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15109 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-02i2c: Add a generic i2c driverDuncan Laurie
This adds a generic I2C driver that can be described in the devicetree and used to generate ACPI objects in the SSDT based on the information provided in the config registers. The I2C bus can be configured and the device can provide an interrupt and wake capability to the OS. A configuration option allows for a GPIO to be provided that will be checked to determine if the device is preset on the board before including it in the generated SSDT. The driver is generic enough to be used for basic I2C devices that do not have special configuration needs such as touchpads, touchscreens, sensors, some audio codec/amplifiers, etc. Sample usage for a touchpad device: device pci 15.1 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = "ELAN Touchpad" register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end end Will result in the following code in the SSDT: Scope (\_SB.PCI0.I2C1) { Device (D015) { Name (_HID, "ELAN0000") Name (_UID, 0) Name (_S0W, 4) Name (_PRW, Package () { 5, 3 }) Method (_STA) { Return (0x0f) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x15, ControllerInitiated, 400000, AddressingMode7Bit, "\\_S.PCI0.I2C1", 0, ResourceConsumer) Interrupt (ResourceConsumer, Edge, ActiveLow) { 51 } }) } } Change-Id: Ib32055720835b70e91ede5e4028ecd91894d70d5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01nau8825: Add driver for I2C codecDuncan Laurie
The Nuvoton NAU8825 audio codec is an I2C device that has a number of tunable parameters that can be provided to the kernel device driver for basic configuration and optimal operation. The configuration options are exposed to devicetree as registers and then presented as Device Properties via ACPI to the operation system. This sample configuration in devicetree: device pci 19.2 on chip drivers/i2c/nau8825 register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)" register "jkdet_enable" = "1" register "sar_threshold_num" = "2" register "sar_threshold[0]" = "0x0c" register "sar_threshold[1]" = "0x1c" device i2c 1a on end end end Will generate the following code in the SSDT, trimmed for this commit message as there are more properties that can be configured: Scope (\_SB.PCI0.I2C4) { Name (_HID, "10508825") Name (_UID, Zero) Name (_DDN, "Nuvoton NAU8825 Codec") Method (_STA) { Return (0xF) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x1A, ControllerInitiated, 0x61A80, AddressingMode7Bit, "\_SB.PCI0.I2C4", 0, ResourceConsumer) Interrupt (ResourceConsumer, Level, ActiveLow) { 0x3A } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bff4aa301"), Package () { Package () { "nuvoton,jkdet-enable", 1 }, Package () { "nuvoton,sar-threshold-num", 2 }, Package () { "nuvoton,sar-threshold", Package () { 0x0c, 0x1c } } } }) } Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I480d72daf5ac3dded9b1cbb5fbc737b9dfde3834 Reviewed-on: https://review.coreboot.org/15015 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-19drivers/i2c: Switch to src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Change-Id: Ia210e6832c18270043c0cb21b4881d9c802f3b2b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14058 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24drivers/i2c/w83795: Add option to use auxiliary SMBUS controllerTimothy Pearson
Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24drivers/i2c/w83795: Add full support for core functionsTimothy Pearson
Add full support for fan control, fan monitoring, and voltage monitoring. Fan speeds and functions are configurable via each mainboard's devicetree.cb file. NOTE: This patch effectively rewrites large portions of the original driver. You may need to re-verify correct operation on your hardware if you were using the old driver code. Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11936 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>