Age | Commit message (Expand) | Author |
2022-11-22 | src/drivers: Remove unnecessary space after casts | Elyes Haouas |
2022-11-20 | drivers/i2c/rx6110sa/chip.h: Remove confusing bus speed comment | Jan Samek |
2022-11-18 | drivers/i2c/rx6110sa/rx6110sa.c: Make log messages consistent | Jan Samek |
2022-11-18 | drivers/i2c/rv3028c7: Add ACPI generation callbacks | Jan Samek |
2022-11-09 | drivers/i2c/designware: Add 100 MHz controller base clock | Werner Zeh |
2022-11-09 | drivers/i2c/sx9324: Add support for Linux's SX9324 driver | Victor Ding |
2022-11-05 | drivers/i2c/generic: Print error when using _CRS and PowerResource | Raul E Rangel |
2022-11-03 | drivers/i2c/generic: Tweak error text for missing HID | Matt DeVillier |
2022-09-22 | drivers/i2c/ptn3460: Add early init option | Jan Samek |
2022-09-16 | drivers/i2c/nau8825: Add ADCOUT IO drive strength control | Eric Lai |
2022-09-14 | timer: Change timer util functions to 64-bit | Rob Barnes |
2022-09-07 | drivers/i2c: Add a new RTC RV-3028-C7 from Micro Crystal | Werner Zeh |
2022-08-17 | drivers/i2c: add MAX98396 driver | Eric Lai |
2022-08-11 | drivers: Add SPDX identifiers to files missing them | Martin Roth |
2022-08-03 | drivers/i2c/dw_i2c: Re-add check for empty i2c transfer list | Nico Huber |
2022-07-17 | drivers: Get rid of unnecessary blank lines {before,after} brace | Elyes HAOUAS |
2022-06-08 | drivers/tpm/cr50: Add TPM IRQ timeout Kconfig option | Yu-Ping Wu |
2022-05-31 | drivers/i2c/generic: Add support for i2c device detection | Matt DeVillier |
2022-05-31 | drivers/i2c/dw_i2c: Adjust to handle 0-byte transfers | Matt DeVillier |
2022-05-28 | drivers/i2c/cs35l53: Add device description and UID | Vitaly Rodionov |
2022-04-24 | tpm: Allow separate handling of Google Ti50 TPM | Jes Klinke |
2022-04-24 | drivers: Remove unused <acpi/acpi.h> | Elyes HAOUAS |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-04-13 | drivers/i2c/designware/dw_i2c: Remove unnecessary tabs in debug log | Reka Norman |
2022-03-25 | drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15 | Eric Lai |
2022-03-18 | drivers/i2c/cs35l53: Add driver for generating device in SSDT | Stefan Binding |
2022-03-15 | i2c: Add configurable I2C transfer timeout | Jes Klinke |
2022-03-09 | {drivers/security}: Replace `cb_err_t` with `enum cb_err` | Subrata Banik |
2022-03-07 | drivers/tpm/cr50: Add I2C bus support to cr50 driver | Tim Wawrzynczak |
2022-02-23 | cr50: Increase cr50 i2c probe timeout | Rob Barnes |
2022-02-11 | drivers/i2c/tpm/cr50: Remove unused `chip` function arguments | Tim Wawrzynczak |
2022-02-07 | treewide: Remove "ERROR: "/"WARN: " prefixes from log messages | Julius Werner |
2022-02-04 | drivers/i2c/designware/dw_i2c: improve CONTROL_SPEED_FS definition | Felix Held |
2022-02-02 | drivers/i2c/designware/dw_i2c: use cb_err for dw_i2c_gen_speed_config | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c: limit scope of dw_i2c_transfer | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c: return enum cb_err from dw_i2c_transfer | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c: return enum cb_err from dw_i2c_init | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c: use enum cb_err for static functions | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c.h: include types.h instead of stdint.h | Felix Held |
2022-02-01 | drivers/i2c/designware/dw_i2c: add missing types.h include | Felix Held |
2022-01-19 | driver/i2c: Add sx9360 driver | Seunghwan Kim |
2022-01-17 | cr50: Increase cr50 i2c probe timeout | Rob Barnes |
2022-01-17 | drivers/i2c/tpm/Kconfig: Reduce visibility of some configs | Arthur Heymans |
2022-01-10 | src/drivers/i2c/gpiomux: Remove unused <stdlib.h> | Elyes HAOUAS |
2021-11-24 | drivers/i2c/tpm: Fix blank default statement | Karthikeyan Ramasubramanian |
2021-11-22 | drivers/tpm: Add firmware-power-managed DSD property | Rob Barnes |
2021-10-05 | src/acpi to src/lib: Fix spelling errors | Martin Roth |
2021-09-20 | driver/i2c/max98390: Add vmon_slot_no/imon_slot_no property | Wisley Chen |
2021-09-14 | driver/i2c/max98390: add dsm_param_name | Wisley Chen |
2021-08-23 | include/bcd: move bcd code to commonlib/bsd/include | Ricardo Quesada |
2021-08-09 | drivers/i2c/da7219: Update _S0W to D3hot | Tim Wawrzynczak |
2021-06-04 | drivers/i2c/designware: Report I2C timings for additional bus speeds | Werner Zeh |
2021-05-30 | drivers/i2c/rx6110sa: Add a Kconfig switch to disable ACPI support | Werner Zeh |
2021-05-12 | drivers/i2c/cs42l42: Make HS_BIAS_SENSE_EN optional | Vitaly Rodionov |
2021-05-05 | drivers/i2c/generic: Set S0W to D3hot for wake device | Tony Huang |
2021-04-30 | drivers/i2c/designware: Use safe defaults for SCL parameters | Kyösti Mälkki |
2021-04-23 | drivers/i2c/cs42l42: Add driver for generating device in SSDT | Vitaly Rodionov |
2021-04-15 | drivers/i2c/tas5825m: Add driver for TI TAS5825M | Jeremy Soller |
2021-04-06 | drivers/i2c/nau8825: Support nau8825 for ACPI GPIO descriptors | Seven Lee |
2021-03-10 | drivers/i2c: sx9310: Replace register map with descriptive names | Gwendal Grignou |
2021-03-04 | src/drivers/i2c/rx6110sa: Add official ACPI ID | Werner Zeh |
2021-02-18 | drivers/i2c/hid: Enforce level triggered IRQ mode | Karthikeyan Ramasubramanian |
2021-01-19 | drivers/i2c/tpm/cr50.c: Use __func__ | Elyes HAOUAS |
2021-01-19 | drivers/i2c/tpm/tpm.c: Use __func__ | Elyes HAOUAS |
2021-01-19 | drivers/i2c/tpm/tis.c: Use __func__ | Elyes HAOUAS |
2021-01-18 | drivers/i2c/sx9324: Add IrqCfg1 register | Stanley Wu |
2020-12-08 | drivers/i2c/tpm: Unconditionally allow I2C TPM ACPI node | Jes Klinke |
2020-12-05 | drivers/i2c/sx9324: Add more registers and reorder | Eric Lai |
2020-12-02 | drivers/i2c/nct7802y: Move the sensor initialization procedure | Maxim Polyakov |
2020-11-22 | drivers/i2c/hid: Use ACPI device name if provided by config | Matt DeVillier |
2020-11-22 | drivers/i2c/generic: Only write DDN field if description not empty | Matt DeVillier |
2020-11-22 | drivers/i2c: Add a driver for Semtech SX9324 | Eric Lai |
2020-11-19 | src/drivers/i2c/rx6110sa: Omit _HID temporarily | Werner Zeh |
2020-11-16 | drivers/i2c/tpm: Remove ifdef of non-existant Kconfig option | Martin Roth |
2020-11-16 | src: Update some incorrect config options in comments | Martin Roth |
2020-11-16 | drivers/i2c/dw: Check for TX_ABORT in transfer | Kangheui Won |
2020-11-12 | drivers/i2c/rx6110sa: Delete unused defines | Werner Zeh |
2020-11-12 | drivers/i2c/rx6110sa: Add basic ACPI support | Werner Zeh |
2020-11-09 | acpi: Call acpi_fill_ssdt() only for enabled devices | Karthikeyan Ramasubramanian |
2020-10-19 | drivers/i2c/gpiomux: Add chip driver for multiplexed I2C bus | Karthikeyan Ramasubramanian |
2020-10-19 | drivers/i2c: Add chip driver for GPIO based I2C multiplexer | Karthikeyan Ramasubramanian |
2020-10-11 | drivers/i2c/nct7802y: Configure remote diodes and local sensor | Maxim Polyakov |
2020-09-21 | src/drivers: Drop unneeded empty lines | Elyes HAOUAS |
2020-07-28 | drivers/i2c/max98373: fix error message formatting | Caveh Jalali |
2020-07-26 | src: Remove whitespace between 'sizeof' and '(' | Elyes HAOUAS |
2020-07-14 | src: Remove unused 'include <stdint.h> | Elyes HAOUAS |
2020-07-14 | src: Remove unused 'include <types.h>' | Elyes HAOUAS |
2020-07-11 | drivers/i2c/w83793: Drop dead code | Angel Pons |
2020-07-09 | drivers/i2c/adt7463: Drop dead code | Angel Pons |
2020-07-02 | acpi_device: Replace polarity with active_low in acpi_gpio for GpioIo | Furquan Shaikh |
2020-06-02 | src: Remove redundant includes | Elyes HAOUAS |
2020-05-20 | driver/i2c/max98390: Fix build error related to max98390 driver | Seunghwan Kim |
2020-05-18 | src: Remove leading blank lines from SPDX header | Elyes HAOUAS |
2020-05-18 | driver/i2c/max98390: Correct included file path | Seunghwan Kim |
2020-05-15 | drivers/i2c/designware: Check if the device is powered | Raul E Rangel |
2020-05-13 | src: Remove unused '#include <stdint.h>' | Elyes HAOUAS |
2020-05-13 | Remove new additions of "this file is part of" lines | Furquan Shaikh |
2020-05-11 | driver/i2c/max98390: Add i2c driver for Maxim 98390 codec | Seunghwan Kim |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-09 | src/: Replace GPL boilerplate with SPDX headers | Patrick Georgi |