summaryrefslogtreecommitdiff
path: root/src/drivers/i2c/nct7802y
AgeCommit message (Collapse)Author
2020-12-02drivers/i2c/nct7802y: Move the sensor initialization procedureMaxim Polyakov
The current location for the sensor initialization procedure was chosen by mistake. Move this into a separate function in nct7802y.c . Change-Id: I093ae75db5f0051bff65375b0720c86642b9148a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-11drivers/i2c/nct7802y: Configure remote diodes and local sensorMaxim Polyakov
The patch allows to configure sensors with a remote diode connected and a on-chip local temperature sensor from the devicetree for the board that uses this HWM. According to the documentation [1], this is done by setting the corresponding bits in the Mode Selection Register (22h). It is necessary for some Intel processors (Apollo Lake SoC) that do not support PECI and the CPU temperature is taken from the thermistor. TEST = After loading the nct7802 module on the Kontron mAL-10 [2] with Linux OS, we can see configuration of the HWM with one sensor in the thermistor mode: user@user-apl:~$ sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 0: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 1: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 2: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 3: +41.0°C (high = +110.0°C, crit = +110.0°C) nct7802-i2c-0-2e Adapter: SMBus CMI adapter cmi in0: +3.35 V (min = +0.00 V, max = +4.09 V) in1: +1.92 V in3: +1.21 V (min = +0.00 V, max = +2.05 V) in4: +1.68 V (min = +0.00 V, max = +2.05 V) fan1: 0 RPM (min = 0 RPM) fan2: 868 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) temp1: +42.5°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) sensor = thermistor temp4: +44.0°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) temp6: +0.0°C [1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y with PECI 3.0 interface, datasheet, revision 1.2, february 2012 [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39766 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10Replace DEVICE_NOOP with noop_(set|read)_resourcesNico Huber
`.read_resources` and `.set_resources` are the only two device operations that are considered mandatory. Other function pointers can be left NULL. Having dedicated no-op implementations for the two mandatory fields should stop the leaking of no-op pointers to other fields. Change-Id: I6469a7568dc24317c95e238749d878e798b0a362 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10Drop unnecessary DEVICE_NOOP entriesNico Huber
Providing an explicit no-op function pointer is only necessary for `.read_resources` and `.set_resources`. All other device-operation pointers are optional and can be NULL. Change-Id: I3d139f7be86180558cabec04b8566873062e33be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-06src/drivers: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I38eaffa391ed5971217ffad74a312b1641e431c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-22AUTHORS: Move src/drivers/[a*-i*] copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Updated Authors file is in a separate commit. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I1acea8c975d14904b7e486dc57a1a67480a6ee6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/36178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-14drivers/i2c/nct7802y: Add new hardware-monitoring ICNico Huber
Just another hardware-monitoring chip. Only limited fan control and PECI configuration is implemented. Change-Id: I35ea79e12941804e398c6304a08170a776f4ca76 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>