coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2016-10-25	drivers/i2c/generic: Re-factor SSDT generation code	Furquan Shaikh
	1. Export i2c_generic_fill_ssdt to allow other device-specific i2c drivers to share and re-use the same code for generating AML code for SSDT. In order to achieve this, following changes are required: a. Add macro I2C_GENERIC_CONFIG that defines a structure with all generic i2c device-tree properties. This macro should be placed by the using driver at the start of its config structure. b. Accept a callback function to add any device specific information to SSDT. If generic driver is used directly by a device, callback would be NULL. Other devices using a separate i2c driver can provide a callback to add any properties to SSDT. 2. Allow device to provide _CID. BUG=chrome-os-partner:57846 Change-Id: I3a0054e22b81f9d6d407bef417eae5e9edc04ee4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17089 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25	drivers/i2c/generic: Enable support for adding PowerResource for device	Furquan Shaikh
	Add support to allow a device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: 1. Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. 2. Reset delay - Delay after reset GPIO is de-asserted (default 0). 3. Enable GPIO - Optional, GPIO to enabled device. 4. Enable delay - Delay after enable GPIO is asserted (default 0). BUG=chrome-os-partner:55988 Change-Id: Ieb2dd95fc1f555f5de66f3dda425172ac5b75dad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17081 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-09-28	drivers/i2c/generic: Add config for marking device as probed	Duncan Laurie
	Add a config option to the generic I2C device driver to indicate to the OS that this device should be probed before being added. This can be used to provide ACPI device instantiations to devices that may not actually exist on the board. For example, if multiple trackpad vendors are supported on the same board they can both be described in ACPI and the OS will probe the address and load the driver only if the device responds to the probe at that address. BUG=chrome-os-partner:57686 Change-Id: I22cffb4b15f25d97dfd37dc58bca315f57bafc59 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02	i2c: Add a generic i2c driver	Duncan Laurie
	This adds a generic I2C driver that can be described in the devicetree and used to generate ACPI objects in the SSDT based on the information provided in the config registers. The I2C bus can be configured and the device can provide an interrupt and wake capability to the OS. A configuration option allows for a GPIO to be provided that will be checked to determine if the device is preset on the board before including it in the generated SSDT. The driver is generic enough to be used for basic I2C devices that do not have special configuration needs such as touchpads, touchscreens, sensors, some audio codec/amplifiers, etc. Sample usage for a touchpad device: device pci 15.1 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = "ELAN Touchpad" register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)" register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end end Will result in the following code in the SSDT: Scope (\_SB.PCI0.I2C1) { Device (D015) { Name (_HID, "ELAN0000") Name (_UID, 0) Name (_S0W, 4) Name (_PRW, Package () { 5, 3 }) Method (_STA) { Return (0x0f) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x15, ControllerInitiated, 400000, AddressingMode7Bit, "\\_S.PCI0.I2C1", 0, ResourceConsumer) Interrupt (ResourceConsumer, Edge, ActiveLow) { 51 } }) } } Change-Id: Ib32055720835b70e91ede5e4028ecd91894d70d5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>