| Age | Commit message (Collapse) | Author |
|---|
|
When the entry delay of L0s is less than the entry delay of L1, GL9755
will enter L0s state first. When it exits from L0s state, the time of L1
entry will be reset. Therefore, the conditions for entering L1 state
cannot be met. In order to enter L1 state, L0s needs to be disabled.
BUG=b:195611000
TEST=Verify GL9755 enters L1 by observing CLKREQ# de-asserts.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: If121b5cb534eb32bac8992683c3f0eee8946acec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In order for short circuit protection and over current protection to work, the
debug mode needs to be turned off.
BUG=b:185749961
TEST=build and test
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: Iacfa3c668a52d1bae15fe82f1c614d0ebd93a957
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
By default, the HS400 mode of GL9763E is slow mode (150MHz).
Therefore, the slow mode is disabled for HS400 running at 200MHz.
For eMMCs such as Hynix (H26M74002HMR) on HS400, adjust the internal
Rx latch dealy of HS400 to have better compatibility.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I84844c2432d4223d9929182c5c430915e52875b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Booting on Kingston (EMMC64G-TA29/TX29-HP) and Hynix (H26M74002HMR) eMMC
currently fails due to R/W error. This is a workaround to finetune the
data latch timing by verdor-specific setting of GL9763E. For improving
the compatibility of GL9763E with these two eMMC.
Signed-off-by: Renius Chen <reniuschengl@gmail.com>
Change-Id: Iddb145ed6a9edb2d7a50248e64659cda78b88ae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Configure the CFG2 register to set the latency to <64us in order
to ensure the L1 exit latency is consistent across devices and that
L1 ASPM is always enabled.
This moves the setup code from device init to device enable so it
executes before coreboot does ASPM configuration, and removes the
call to pci_dev_init() as that is just for VGA Option ROMs.
BUG=b:173207454
TEST=Verify the device and link capability and control for L1:
DevCap: Latency L1 <64us
LnkCap: Latency L1 <64us
LnkCtl: ASPM L1 Enabled
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ie2b85a6697f164fbe4f84d8cd5acb2b5911ca7a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The device is a PCIe Gen2 to SD 4.0 card reader controller to be
used in the Chromebook. The datasheet name is GL9755S and the revision
is 05.
The patch sets LTR value.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The device is a PCIe to eMMC bridge controller to be used in the
Chromebook as the boot disk. The datasheet name is GL9763E and
the revision is 02.
The patch sets single request AXI, disables ASPM L0s and enables SSC.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
